وظائف اخصائي العمليات في قطر

Commissioning Engineer (Electrical) | Qatar Offshore <br><br>We're looking for an experienced Commissioning Engineer (Electrical) to support a major offshore oil & gas project based in Qatar.<br><br>Requirements<br><br>B. E./B. Sc. Degree in Mechanical, Electrical, or Instrumentation Engineering Minimum 15 years of commissioning experience within the oil & gas industry or similar facilities Proven experience in brownfield modifications, including offshore projects Experience working in a multicultural environment Strong written and spoken English communication skills<br><br>Key Responsibilities<br><br>Coordinate and prepare commissioning dossiers for offshore operations teams Ensure compliance with technical standards and internationally accepted engineering practices Support safe and efficient commissioning of plant and equipment Interface with offshore operations and project teams throughout the commissioning phase Interested candidates may send their updated CV to:<br><br>norniqmahabkarim@airswift.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Manage the operations of four offshore drilling and workover units, including the monitoring and management of drilling contractors and the resolution of operational problems in cooperation with subordinate Superintendents, to ensure drilling and intervention objectives are achieved safely and efficiently.</p><br> <br><strong>Required Experience and Skills</strong><br><ul><li>Minimum 15 years' experience in offshore drilling and workover operations, including 5 years as an Offshore Drilling Supervisor and 5 years as an Offshore Drilling Superintendent.<br></li><li>Experience in managing offshore drilling, workover and intervention operations, including contractor oversight and operational performance management.<br></li><li>Tendering and contracting experience.</li><li>Proven leadership and people management skills with a keen awareness of cultural sensitivities and a passion for managing HSE.</li><li>Strong communication skills in English (demonstrated verbal and written skills).</li><li><span>High energy and enthusiasm for delivering outstanding performance, with a "can do" attitude and proven track record in drilling and workover operations</span></li></ul> <br><strong>Educational Qualifications</strong><br><p>BSc in Petroleum Engineering or equivalent.</p><br><p>IWCF Certified.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><span><span><span>We are looking for a results-driven COO to lead daily operations, drive revenue growth, and build a high-performance culture, enabling the Founder to focus on strategic growth, AI implementation, and long-term vision.</span><span>Responsibilities:</span><span>- Lead day-to-day operations across all business divisions; manage department heads and ensure target achievement</span><span>- Drive revenue growth and operational excellence; implement KPIs, SOPs, dashboards, and accountability systems</span><span>- Lead the successful launch and operation of the new Business Center; build scalable systems for future expansion</span><span>- Improve customer experience and service quality across all touchpoints</span><span>- Coordinate closely with the Founder on strategic initiatives and organizational transformation</span></span></span></span><br><br></span><br><span>Requirements<span>- Minimum 10–15 years of senior leadership experience with proven success in managing multi-department operations</span><span>- Strong commercial and revenue growth mindset; experience implementing KPIs, SOPs, ERP/CRM, and performance management frameworks</span><span>- Background in business services, consultancy, hospitality, business centers, real estate, or professional services is an advantage</span><span>- Fluent in English (mandatory); Arabic is a strong advantage</span><span>- Strategic thinker with strong execution capability, high integrity, and an entrepreneurial mindset</span><br><br></span><br> </div>

<p>We are seeking a highly skilled and dynamic Senior O&M Engineer / Coordinator with 5 to 7+ years of hands-on experience in water and wastewater treatment operations. In this role, you will oversee the operations and maintenance (O&M) of critical water systems, including Sewage Treatment Plants (STP), Reverse Osmosis (RO) systems, and Medical Ultrapure Water Treatment plants. The ideal candidate will bridge the gap between technical excellence and client relationship management—ensuring strict adherence to contractual deliverables, managing resources efficiently, and driving business growth through outstanding customer service and sales support. Key Responsibilities 1. Operations & Contractual Management • O&M Planning: Develop, implement, and optimize comprehensive O&M plans, standard operating procedures (SOPs), and preventive maintenance schedules. • Contract Compliance: Thoroughly identify, monitor, and deliver all contractual obligations and Key Performance Indicators (KPIs). • Resource Management: Manage on-site technicians, operators, and resources to ensure 24/7 smooth facility operations and optimal chemical/energy consumption. 2. Technical Expertise & Maintenance • System Oversight: Oversee the daily performance of STPs, RO systems, and Medical Ultrapure Water assets. • Hands-on Troubleshooting: Apply strong mechanical and electrical maintenance knowledge to diagnose and resolve equipment failures swiftly. • Process Optimization: Execute Clean-in-Place (CIP) processes, membrane optimization strategies, and oversee the maintenance of water softeners and UV disinfection systems. 3. Client Relations & Business Growth • Customer Service: Act as the primary point of contact for clients, managing expectations with a proactive, customer-focused attitude. • Retention & Expansion: Maintain high client satisfaction to retain existing contracts and identify upsell opportunities to expand business revenue. • Sales Support: Assist the commercial team by conducting technical site visits, contributing to technical proposals, and leveraging operational insights to win new business</p><p>Experience: 5–7+ years of direct experience in the operation and maintenance of Water & Wastewater Treatment plants (specifically RO, STP, and Medical Ultrapure Water). Education: Bachelor’s degree in Chemical, Mechanical, Electrical, or Environmental Engineering, or a related technical discipline. Technical Skills: * Deep understanding of RO membrane optimization and CIP processes. • Proficiency in troubleshooting mechanical (pumps, valves) and electrical (PLCs, control panels) systems. • Familiarity with UV disinfection systems and water softening technologies. • Soft Skills: Outstanding communication, leadership, and negotiation skills with a proven track record in client-facing roles. • Commercial Acumen: Ability to understand contracts, manage budgets, and support sales/proposal development.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Plant Operation &amp; Process Control</p><br><br><p>* Operate and monitor SWRO plant processes through DCS/SCADA systems.</p><br><br><p>* Control plant parameters such as: o Intake and pretreatment systems o DAF and ultrafiltration units</p><br><br><p>o High-pressure pumps</p><br><br><p>o RO trains</p><br><br><p>o Chemical dosing systems</p><br><br><p>o Product water and distribution systems</p><br><br><p>* Respond to alarms and process deviations.</p><br><br><p>* Take corrective actions to maintain stable operation.</p><br><br><br><p>Monitoring &amp; Reporting</p><br><br><p>* Record operational data and prepare shift reports.</p><br><br><p>* Monitor water quality parameters.</p><br><br><p>* Analyze plant performance trends..</p><br><br><p>* Maintain accurate operational logs.</p><br><br><br><p>Coordination</p><br><br><p>* Coordinate with field operators during plant start-up, shutdown, and emergency situations.</p><br><br><p>* Supervise field activities from the control room.</p><br><br><p>* Communicate operational changes to maintenance and operations teams.</p><br><br><br><p>Maintenance Support</p><br><br><p>* Assist maintenance teams during troubleshooting and equipment isolation.</p><br><br><p>* Participate in calibration of instruments and process equipment.</p><br><br><p>* Support preventive maintenance activities.</p><br><br><br><p>Safety &amp; Compliance</p><br><br><p>* Follow HSE procedures and permit-to-work requirements.</p><br><br><p>* Ensure compliance with environmental and water quality regulations.</p><br><br><p>* Report abnormal conditions immediately.<br></p><br><br>Skills<p>* Diploma or Degree in:</p><br><br><p>o Chemical Engineering</p><br><br><p>o Mechanical Engineering</p><br><br><p>o Electrical Engineering</p><br><br><p>o Process Technology o Water Treatment Technology</p><br><br><p>* Technical or trade qualification with relevant desalination experience may also be accepted.</p><br><br><br><p>Experience Requirements</p><br><br><p>* Typically 3-5 years or more in:</p><br><br><p>o SWRO desalination plants - 50 MLD or above o Water treatment plants</p><br><br><p>o Wastewater treatment plants</p><br><br><p>o Process industries (chemical, power, oil &amp; gas)</p><br><br><p>* Experience operating DCS, SCADA, PLC systems.</p><br><br><p>* Knowledge of water treatment chemistry and chemical dosing systems.</p><br><br> <br><br> </div>

<p>Manage the operations of four offshore drilling and workover units, including the monitoring and management of drilling contractors and the resolution of operational problems in cooperation with subordinate Superintendents, to ensure drilling and intervention objectives are achieved safely and efficiently.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 15 years' experience in offshore drilling and workover operations, including 5 years as an Offshore Drilling Supervisor and 5 years as an Offshore Drilling Superintendent.</li><li>Experience in managing offshore drilling, workover and intervention operations, including contractor oversight and operational performance management.</li><li>Tendering and contracting experience.</li><li>Proven leadership and people management skills with a keen awareness of cultural sensitivities and a passion for managing HSE.</li><li>Strong communication skills in English (demonstrated verbal and written skills).</li><li>High energy and enthusiasm for delivering outstanding performance, with a "can do" attitude and proven track record in drilling and workover operations</li></ul><p>BSc in Petroleum Engineering or equivalent.</p><p>IWCF Certified.</p>

Job Description<br><br>Senior technical leadership role requiring strong hands-on experience across modern data and AI platforms, Dev Ops/Data Ops, production AI, observability and Service Management integration.<br><br>Key Success Measures<br><br> Data & AI Product Ops practice established, adopted and scaled. Clear and reusable standards established across Data Ops, MLOps, LLMOps and Agent Ops. Product Ops capabilities successfully implemented within clients’ environments. Clear production ownership, operational readiness and L0/L1/L2/L3 support models established. Improved product health and SLO compliance. Reduced incident detection and restoration time. Reduced recurring production issues and unnecessary engineering escalations. Increased automation, proactive monitoring and self-service. Strong integration between Data & AI Product Ops and Enterprise Service Management. Increased reuse of standards, patterns, playbooks and delivery accelerators. Strong internal capability development and effective client knowledge transfer. <br><br>Responsibilities<br><br> Practice Development <br><br> Establish and lead the Data & AI Product Ops practice, including the operating model, standards, methods, governance, reusable patterns, playbooks and implementation approach. Define the practice across Data Ops, MLOps, LLMOps and Agent Ops, with clear standards for operating Data, BI, ML, Gen AI and Agent-based products in production. Develop reusable Product Ops assets, including operational readiness standards, support models, SLO frameworks, monitoring patterns, runbooks, implementation templates and delivery accelerators. <br><br> Product Operations <br><br> Define and implement operational readiness requirements covering product ownership, criticality, support levels, SLAs/SLOs, monitoring, alerting, runbooks, escalation, recovery, dependencies and rollback. Establish clear L0/L1/L2/L3 support models, with L0 focused on automation and self-service, L1 on Service Desk support and initial triage, L2 on Product Ops-led operational support and product-level troubleshooting, and L3 on complex issues requiring Engineering expertise. Establish product health and observability across availability, performance, data freshness and quality, pipeline and integration health, model and AI performance, usage, cost and other product-specific operational measures. Lead product-level incident investigation, restoration and root-cause analysis, coordinating across Engineering, Platform, Service Management, Security and vendors. Integrate Product Ops with enterprise Incident, Problem, Request, Change, Release, Knowledge, Service Level and Major Incident Management processes. Ensure recurring incidents and operational issues are converted into permanent corrective actions, automation opportunities and product improvement backlog items. Establish effective change and release practices supported by automated testing, CI/CD, versioning, controlled deployment, and rollback. Establish regular Product Operations reviews covering product health, SLOs, incidents, recurring problems, operational trends, technical debt, improvements and releases. <br><br> Client Delivery <br><br> Assess clients Data & AI Product Ops maturity and define target operating models, support structures, service levels, observability, automation and implementation roadmaps. Design and implement Product Ops capabilities for Data, BI, ML, Gen AI and Agent-based products within clients’ environments. Lead clients solutioning, architecture workshops and implementation engagements, defining roles, responsibilities, support models, operational processes, tooling and Service Management integration. Provide architecture and implementation oversight for complex Data and AI production environments, engaging senior stakeholders across Product, Engineering, Platform, Governance, Security and Service Management. Support proposals, technical solutioning and advisory engagements across Data & AI Product Ops, Data Ops, MLOps, LLMOps and Agent Ops. <br><br> Leadership Expectations <br><br> Build and scale a new Data & AI Product Ops practice. Provide strong technical leadership while remaining hands-on where required. Lead multidisciplinary teams across Data, AI, Engineering, Platform, Product and Service Management. Provide architecture and implementation oversight across complex enterprise environments. Engage confidently with senior clients and internal stakeholders. Translate emerging Data and AI technologies into practical enterprise operating practices. Develop internal talent and build sustainable technical capability. <br><br>Qualifications<br><br> Bachelor’s degree in Computer Science, Engineering, Data/AI, Information Systems, or a related field. Relevant certifications across cloud, Data & AI platforms, Dev Ops/MLOps, Service Management, architecture, or data management are an advantage. 10+ years of experience across Data Engineering, AI/ML, Data Ops, Dev Ops, SRE, Product Operations, Platform Engineering or related disciplines. Strong hands-on experience with modern enterprise data platforms and production Data/AI solutions. Demonstrated experience establishing or leading production operating capabilities for Data and AI products. Strong practical experience across Data Ops, MLOps, LLMOps and Agent Ops. Strong experience with operational readiness, observability, SLAs/SLOs, monitoring, support models, incident and problem management, CI/CD, automated testing, release management, recovery and rollback. Experience operating BI and data products, data pipelines, APIs, integrations, ML models, Gen AI applications and AI Agents in production. Practical experience with model lifecycle management, model serving, drift monitoring, RAG, vector search, AI evaluation, AI observability, Agent tracing, tool execution and guardrails. Strong understanding of enterprise ITSM and Service Management, with experience integrating Data and AI product teams into established support, incident, problem, change and release processes. Strong incident leadership, troubleshooting, root-cause analysis and production problem-solving capabilities. Demonstrated experience developing technical standards, operating models, reusable patterns and implementation methods. Strong client-facing consulting, architecture, solutioning and stakeholder-management capabilities. Strong experience working with government agencies or large enterprises in Qatar or the GCC is highly preferred. <br><br> Preferred Technology Experience <br><br>Experience Across a Combination Of The Following Technology Areas<br><br> Data & Analytics Platforms: Databricks, Informatica IDMC, Microsoft Fabric, Power BI, Azure Data Services, Spark and Delta Lake. Data Integration & Streaming: Informatica, Kafka, APIs, batch integration, streaming and CDC patterns. AI, ML & Gen AI: MLflow, Azure AI/ML, model serving and monitoring, RAG, vector search, AI evaluation and AI observability. Gen AI & Agent Frameworks: Lang Chain, Lang Graph, Semantic Kernel or equivalent Gen AI and Agent orchestration frameworks. Dev Ops & Platform Engineering: Azure Dev Ops, Git Hub, CI/CD, Docker, Kubernetes, Terraform, Python and SQL. Observability & Monitoring: Open Telemetry, Azure Monitor, Application Insights or equivalent enterprise monitoring platforms. Service Management: Service Now or equivalent enterprise ITSM platforms.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Leads the dedicated Terminal Operations Centre cover, ensuring the TOC systems and <br><br>displays are supported at all times.<br><br>Responsibilities:<br></span><ul><li><span>Supervise dedicated TOC cover on every shift and support QROC activities. <br></span></li><li><span>Monitor TOC systems, video walls and displays; give TOC faults priority response.<br></span></li><li><span>Coordinate with the TOC operations team and MATAR.<br></span></li><li><span>Escalate TOC-affecting incidents immediately.<br></span></li><li><span>Maintain TOC operational logs and handover.<br></span></li></ul><br><span>RequirementsQualifications &amp;amp; certifications <br><br></span><ul><li><span>Diploma/degree in IT/engineering.<br></span></li><li><span>ITIL Foundation.<br></span></li><li><span>AV/video-wall and monitoring familiarity.<br></span></li></ul>Experience: Five or more years in an operations-centre or NOC environment, with supervisory experience.<br><br>Competencies<br><br><ul><li><span>Situational awareness.<br></span></li><li><span>Priority response.<br></span></li><li><span>Communication.<br></span></li><li><span>Composure.<br></span></li></ul>Key performance indicators<br><br><ul><li><span>TOC availability.<br></span></li><li><span>Priority-response times.<br></span></li><li><span>Handover quality.<br></span></li></ul>Working conditions &amp; compliance: Holds a valid MOI airport security pass. Compliance with MATAR<br><br>HSE and cyber policies; use of the Enterprise Time &amp; Attendance System (ETAS); use of MATAR-<br><br>authorised devices only.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Lead the testing and commissioning of electrical systems and equipment.</span><br><span>Perform and supervise insulation resistance, continuity, functional, protection relay, and operational tests.</span><br><span>Troubleshoot electrical faults and recommend corrective actions.</span><br><span>Review electrical drawings, single-line diagrams, schematics, method statements, and commissioning procedures.</span><br><span>Supervise and guide electrical technicians during testing and commissioning activities.</span><br><span>Coordinate energization, isolation, shutdown, and start-up activities.</span><br><span>Ensure testing instruments are calibrated and suitable for use.</span><br><span>Prepare test reports, commissioning records, punch lists, and system handover documentation.</span><br><span>Coordinate with construction, engineering, client, vendor, and operations teams.</span><br><span>Ensure compliance with project HSE requirements, permit-to-work procedures, and electrical safety standards.</span><br></span><br><span>Requirements<span>Bachelor’s degree or diploma in Electrical Engineering.</span><br><span>Minimum 8 years of relevant electrical experience, including significant commissioning experience.</span><br><span>Strong experience in industrial, power, oil and gas, petrochemical, or infrastructure projects.</span><br><span>Sound knowledge of transformers, switchgear, MCCs, motors, generators, UPS systems, cables, protection systems, and control panels.</span><br><span>Strong electrical troubleshooting and fault-finding skills.</span><br><span>Experience leading and supervising teams of electrical technicians.</span><br><span>Ability to read and interpret electrical drawings and technical documents.</span><br><span>Familiarity with electrical testing equipment and commissioning documentation.</span><br><span>Strong knowledge of LOTO, electrical isolation, permit-to-work, and HSE procedures.</span><br></span><br> </div>

Airswift are a Global Manpower Provider specialising in the Energy, Infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.<br><br>Role<br><br>We are working with a Major Oil & Gas operator to source for Commissioning Coordinator (Instrumentation) to work for Multi-Billion Offshore Redevelopment Project consist of Greenfield & Brownfield scope). This is a long-term contract role working offshore with rotation cycle of 29 days ON / 27 days OFF. Please see details below:<br><br>Title: Commissioning Coordinator (Instrumentation) - 19.1.13<br><br>Start Date: Negotiable (typically within 1 month notice)<br><br>Duration: 36 months (potential for extension)<br><br>Location: Offshore<br><br>Rotation Cycle: 29 days ON / 27 days OFF - 12 hours per day<br><br>Qualification<br><br>Diploma/Degree in relevant engineering Discipline with extensive commissioning of offshore oil and gas facilities with exposure to construction activities.<br><br>Experience<br><br>A minimum of ten (10) years’ experience in pre-commissioning and commissioning activities in projects of oil & gas industry. Exposure to commissioning database Commissioning & Operational Readiness Software and Specifications. Understanding of commissioning for various types of work - Mechanical / Elec / Instrumentation / Telecom. Good skills in commissioning management, effective communication, conflict resolution. <br><br>Primary Duties And Responsibilities<br><br>To function as Focal Point for supervision of project related pre-commissioning and commissioning works executed by contractors/their sub-contractors at COMPANY facilities/contractor marine spread at offshore locations, in accordance with Company e-PTW requirements. Company representative on board facilities/contractor marine spread at offshore locations responsible for the project related pre- commissioning and commissioning activities. Prepare required work permits as permit applicant and ensure all stipulated COMPANY e-PTW system requirements are adhered by contractor personnel for execution of identified work. Attend daily meeting with the Asset Holder for planning of works and reporting of progress/constraints. Laisse with PO HSEQ personnel for the required surveillance of construction/installation /commissioning works to ensure works are being carried out in line with approved HSEQ procedures. Coordinate with the contractor representative for movement of personnel and material for execution of work as per agreed schedule. Review contractor’s pre-commissioning and commissioning plans / schedules / procedures / JSAs. Monitor pre-commissioning and commissioning activities to ensure works are in line with approved procedures and AFC drawings. Inspect the completed work for mechanical completion and identified punch list items to start the pre commissioning activities. Coordinate with construction supervisors for clearance of punch list items and witness required pre-commissioning and commissioning activities. Provide daily Progress report of the activities to Head Commissioning and Logistics and Project Team as per identified distribution matrix. Scheduling and coordinating with Operations Representatives to witness site acceptance tests, loop checks etc. as per commissioning plan. Develop planning of the commissioning activities and ensure its implementation as per the approved commissioning plan and project schedule. Detail the activities into required systems and subsystems to facilitate commissioning and start up. Develop and arrange for approval of all commissioning handover checklists and certificates and coordinate with Contractor/Vendors to solve system/equipment performance problems. Work closely with project Construction Team, End User and Contractor to coordinate punch listing activities from beginning to end of the commissioning process including clearance and close out. Coordinate schedule for vendors’ presence/visits at site(s), on-job training to assist in the commissioning of critical equipment and processes. Support Qatari development activities by ensuring that Qatari Nationals receive the proper job training and development in order to realize the full potential for local talents and maximize contribution to project success.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking experienced <b>FM Operators / Plant Operators</b> to join a large-scale Facilities Management project in Qatar.</p><p><b>Key Requirements:</b></p><ul><li>Technical qualification in <b>HVAC, Mechanical, Electrical or Electromechanical disciplines</b></li><li>Minimum <b>5 years of relevant operational experience</b></li><li>Experience operating and monitoring <b>MEP and building services equipment</b></li><li>Knowledge of <b>HVAC systems, pumps, motors and associated plant equipment</b></li><li>Experience with <b>BMS/control systems</b> is highly desirable</li><li>Able to perform equipment inspections and identify operational abnormalities</li><li>Understanding of preventive maintenance and safe operating procedures</li><li>Facilities Management/building operations experience preferred</li><li>GCC/Qatar experience is an advantage</li><li><b>Arabic and English communication skills required</b></li><li>Willingness to work shifts where required</li></ul><p>The role will support the safe and efficient operation of building systems and equipment across multiple facilities.</p><p><b>Location:</b> Qatar</p><p> <b>Industry:</b> Facilities Management</p><p> <b>Position:</b> Full-Time</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Technical qualification in <b>HVAC, Mechanical, Electrical or Electromechanical disciplines</b></li><li>Minimum <b>5 years of relevant operational experience</b></li><li>Experience operating and monitoring <b>MEP and building services equipment</b></li><li>Knowledge of <b>HVAC systems, pumps, motors and associated plant equipment</b></li><li>Experience with <b>BMS/control systems</b> is highly desirable</li><li>Able to perform equipment inspections and identify operational abnormalities</li><li>Understanding of preventive maintenance and safe operating procedures</li><li>Facilities Management/building operations experience preferred</li><li>GCC/Qatar experience is an advantage</li><li><b>Arabic and English communication skills required</b></li></ul><p><br></p></div>

<p>Operate conventional horizontal lathes, boring machines, and milling machines to perform precision machining operations.</p><p>Machine, repair, and refurbish components used in turbo compressors, reciprocating compressors, gas turbines, and steam turbines.</p><p>Perform machining activities in accordance with engineering drawings, specifications, and quality standards.</p><p>Carry out reverse engineering of worn or damaged components when required.</p><p>Conduct dimensional inspections using precision measuring instruments such as verniers, micrometers, dial gauges, and bore gauges.</p><p>Ensure all machined components meet specified tolerances and quality requirements.</p><p>Prepare machining and inspection reports and maintain accurate documentation.</p><p>Maintain workshop equipment and ensure compliance with safety procedures and housekeeping standards.</p><p>Support continuous improvement initiatives within the workshop.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</li><li>Minimum 10 years of experience in conventional machining and rotating equipment repair.</li><li>Proven experience operating horizontal lathes, boring machines, and conventional milling machines.</li><li>Experience machining components for gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</li><li>CNC operation and programming experience is an added advantage.</li><li>Strong understanding of engineering drawings, machining tolerances, and precision measurement techniques.</li><li>Good knowledge of workshop safety standards and best practices.</li><li>Proficiency in Microsoft Office for documentation and reporting.</li><li>Conventional Lathe Operation</li><li>Boring Machine Operation</li><li>Milling Machine Operation</li><li>Precision Machining</li><li>Reverse Engineering</li><li>Engineering Drawing Interpretation</li><li>Dimensional Inspection</li><li>Rotating Equipment Repair</li><li>Problem Solving</li><li>Teamwork and Communication</li><li>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</li><li>Minimum 10 years of hands-on experience as a Machinist in a workshop or service center environment.</li><li>Proven experience operating conventional horizontal lathes, boring machines, and milling machines.</li><li>Experience machining and repairing components for gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</li><li>Ability to read and interpret engineering drawings and work to close machining tolerances.</li><li>Skilled in using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.</li><li>Experience with reverse engineering and component refurbishment is preferred.</li><li>CNC machining and programming experience is an added advantage.</li><li>Strong commitment to safety, quality, and continuous improvement.</li><li>Good communication skills and the ability to work effectively in a team environment.</li></ul>

Job description:<br><br> Job Purpose Deploy and implement asset-based process safety, loss prevention and risk engineering objectives, providing critical inputs and facilitation to ensure compliance with relevant standards. Deliver appropriate advisory to asset(s) and relevant customers in advancing excellence in process safety and risk engineering, including across associated assets/facilities, brownfield projects and interfacing major capital projects. Key Job Accountabilities - I Execute the deployment and implementation of company process safety, loss prevention and risk management objectives and program in the assigned asset(s). Provide process safety and risk engineering inputs and review for engineering documentations, project deliverables, interface documents to ensure they meet with the relevant standards. Facilitate the hazard identification (HAZID) and risk assessment studies and prepare related reports. Facilitate the implementation of relevant loss prevention engineering procedures in the assigned asset(s). Conduct and support the execution of major safety studies such as quantitative risk assessment (QRA), and manage asset hazard and operability (HAZOP), safety and integrity level (SIL) baseline/revalidation etc., coordinating activities required for the completion of those studies. Work with external consultant to produce quality document as required. Collaborate with Qatar Energy LNG Assets and other functional groups to ensure adequate involvement. Key Job Accountabilities - II Coordinate Safety Case and Barrier Management efforts in the assigned asset(s) to facilitate the identification, implementation, and maintenance of effective safety barriers. Perform safety and technical review of Management of Change requests (MOCs) and consult with assigned engineers and the functional groups to ensure that plant/field integrity and safety is maintained. Monitor and analyse key process safety performance indicator, identifying trends and providing insights in process safety performance, collaborating with Operations and other relevant departments to initiate corrective actions. Provide the required support for the administration, implementation, and sustainability of L3 Manage Operations Risk (MOR) Process and L3 Ensure Process Safety across Qatar Energy LNG in their respective assets. Represent Process Safety & Risk Engineering in the projects for safety studies including, HAZOP, HAZID, 3D model review, SIL review, QRA, etc. relevant to the assigned asset(s). Qualifications Bachelor’s degree in engineering (preferably in chemical, mechanical or safety). Knowledge and/or Experience - I 8 years’ experience in oil and gas sector in process safety, loss prevention, risk management and technical safety areas Experience in process safety, and risk assessment/studies. Require lead hazard identification reviews utilizing recognized techniques (e.g., HAZOP, What-If, etc.) with a good understanding of qualitative and quantitative risk assessment techniques. Practical knowledge of safe systems of work with emergency preparedness knowledge/experience.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Responsible for pre-commissioning, commissioning, and start-up of facilities in projects in accordance with procedures and guidelines in place.</li> <li>To define, mobilize and manage an organization which will cover the preparation and the execution of commissioning.</li> </ul><br><ul> <li>To manage the preparation of project specific pre-commissioning /commissioning procedures and reporting tools (including technical database when applicable, planning, punch list control).</li> <li>To manage the execution of commissioning to achieve maximum productivity, minimize cost and achieve smooth hand over.</li> <li>To supervise the reporting of commissioning execution to ensure that all technical, and contractual information is properly recorded, collected and available for inspection/reference as required by regulations and procedures/policies.</li> <li>To supervise the schedule of commissioning in order to reach the planned end date.</li> <li>To co-ordinate with other project entities/existing facilities.</li> <li>To ensure the project commissioning and handover process is implemented in compliance with procedures and guidelines.</li> <li>To promote HSE behaviour within the commissioning activities and verify that HSE procedures are implemented by commissioning team.</li> <li>To review and provide input to project scope of work.</li> <li>Improve commissioning procedures, initiate and contribute to the commissioning deliverables standardization, develop strategy to minimize offshore commissioning and minimize lost time due to interfaces.</li> <li>Develop commissioning strategy and provide input to the project execution plan and early stages of engineering.</li> <li>Responsible for the review and the approval of the various commissioning preparation tasks to be performed by the Contractor: work breakdown structure, priorities, resources, schedule, etc.</li> <li>Review and approve the commissioning management procedures (hand over, checklists, interfaces, punch list, internal organisation, and sign-off certificates).</li> <li>Review and approve the commissioning dossiers prepared by the Contractor (including database populating and operational test procedures writing).</li> <li>Coordinate activities of the commissioning team (system engineers, discipline supervisors, planning / punch list controller, Asset holder).</li> <li>Identify and address all interface issues with other project packages with respect to commissioning.</li> <li>Prepare overall commissioning plan and obtain approval for the same in consultation with Asset Holder.</li> <li>Responsible to check and endorse mechanical completion</li> <li>Responsible for witnessing and monitoring the pre-commissioning activities performed by the Contractor.</li> <li>Countersign all pre-commissioning dossiers at Ready for Commissioning (RFC) status.</li> <li>Control all commissioning activities performed by the Contractor and its reporting.</li> <li>Check progress against planning and recommend any necessary corrective actions, close follow up on punch list with Contractor and Asset Holder.</li> <li>Coordinate with Contractor/Vendors to solve system/equipment performance problems.</li> <li>Coordinate schedule for equipment vendor's presence/visits at site(s), on-job and classroom training to Operations to assist in the commissioning of critical equipment and processes.</li> <li>Review and approve the commissioning dossiers after completion of commissioning activities and sign the Ready for Start Up and hand over certificates</li> <li>Participate and contribute to all safety design review and studies.</li> <li>Support and assist project team in project closeout gate.</li> <li>Actively participates and contributes to Qatari development programmes.</li> </ul><br><ul> <li>Sc. in an Engineering Discipline with extensive experience in commissioning of oil and gas projects.</li> <li>Minimum of twelve (12) years' experience in design, construction, commissioning, and start-up of oil &amp; gas processing plants and preferably offshore with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader.</li> <li>Excellent interpersonal and communication skills</li> <li>Leadership and managerial skills</li> <li>Relevant technical expertise. Multi-discipline engineering exposure with troubleshooting and problem-solving skills.</li> <li>Good IT and analytical skills.</li> <li>The ability to work well under pressure.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

???? WE’RE HIRING — LIFTING PERSONNEL | QATAREnergy Rigging Ltd is recruiting for a long-term project in Ras Bu Fontas, Doha:✅ 1 × Lifting Appointed Person✅ 3 × Lifting Supervisors Qualified applicants already based in Qatar will be prioritised. LIFTING APPOINTED PERSONMinimum five years of relevant experience after obtaining the Appointed Person qualification. Valid third-party Appointed Person for Lifting Operations certification, such as TÜV, DNV or BV. Alternative qualifications are subject to client review. Demonstrable experience preparing lifting plans, supporting calculations, risk assessments and method statements. Experience selecting lifting equipment and planning complex lifting operations. Original qualification date and current certificates required for verification. LIFTING SUPERVISORSMinimum five years’ experience working as a Lifting Supervisor. Valid Lifting Supervisor certification from a Qatar Energy-approved third-party body, subject to client verification. Proven experience supervising lifting teams and implementing approved lifting plans. Confident delivering pre-lift briefings, checking equipment and coordinating safe lifting operations. ASSIGNMENT DETAILS???? Ras Bu Fontas, Doha, Qatar???? Anticipated duration: minimum 12 months???? Planned schedule: 10-hour days, six days per week; paid hours and overtime terms to be confirmed???? Earliest available start, subject to approvals and mobilisation arrangements Pay and the full package will be agreed before acceptance. Accommodation, meals and local transport can be arranged; arrangements and any charges will be confirmed. HOW TO APPLYSend the following to enquiries@energyrigging.com:Updated CV and relevant certificates. Current location. Notice period and earliest start date. Expected monthly pay in QAR, stating whether allowances are included. For Qatar-based applicants, current employment status and any transfer requirements. Email subject: Qatar – [Role] – [Your Name]All appointments are subject to document verification and client approval. Please share with qualified colleagues who may be interested.#Qatar Jobs #Appointed Person #Lifting Supervisor #Lifting Operations #Rigging #Energy Rigging

<p>The Lead Process Improvement Engineer Facility Management is responsible for driving continuous improvement, operational excellence, quality assurance and cost optimisation across Facility Management operations. The role works closely with operational, technical and commercial teams to assess actual service delivery, identify performance and cost gaps, improve processes and ensure consistent compliance with contractual requirements, internal standards and industry best practices. This is a highly field-driven and analytical role, requiring regular engagement with operational sites, clients and internal stakeholders across both Hard and Soft FM Services.</p><p><strong>Key Responsibilities</strong></p><p><strong>Operational Excellence &amp; Site Performance</strong></p><ul><li>Conduct regular site visits and operational assessments to evaluate actual service delivery and performance.</li><li>Identify gaps between reported performance and actual site conditions.</li><li>Review Hard and Soft FM service delivery and recommend practical improvements.</li><li>Identify operational risks and support site teams in implementing effective corrective measures.</li><li>Challenge existing working practices where required and promote greater consistency across FM contracts.</li><li>Support the standardisation of processes, procedures and operational best practices across sites.</li></ul><p><strong>Process Improvement &amp; Continuous Improvement</strong></p><ul><li>Lead continuous improvement and process optimisation initiatives across FM operations.</li><li>Analyse existing workflows and identify opportunities to improve efficiency, productivity, quality and cost.</li><li>Develop and implement improved processes in coordination with operational and functional teams.</li><li>Lead Root Cause Analysis (RCA) for recurring operational failures and service issues.</li><li>Ensure corrective and preventive actions are implemented and monitored through to closure.</li><li>Apply Lean, Six Sigma, TQM and other recognised process improvement methodologies where appropriate.</li></ul><p><strong>Quality Assurance, Audits &amp; Compliance</strong></p><ul><li>Conduct structured operational, quality and performance audits across FM contracts.</li><li>Identify non-conformances and areas for improvement.</li><li>Develop, monitor and close corrective action plans.</li><li>Ensure operational activities comply with contractual requirements, internal procedures and relevant industry standards.</li><li>Support implementation and maintenance of applicable ISO management systems and FM best practices.</li></ul><p><strong>SLA, KPI &amp; Performance Management</strong></p><ul><li>Review and optimise SLA and KPI frameworks in line with contractual requirements.</li><li>Analyse operational performance and identify trends, recurring issues and areas requiring management intervention.</li><li>Develop dashboards, reports and performance presentations.</li><li>Translate operational data into clear and actionable recommendations for management and site teams.</li><li>Support continuous improvement of service quality and client satisfaction.</li></ul><p><strong>Commercial &amp; Cost Optimisation</strong></p><ul><li>Support budgeting, estimation and pricing activities from an operational and technical perspective.</li><li>Review existing cost structures, resource assumptions and estimation methodologies.</li><li>Identify inefficiencies, cost leakage, overestimation and opportunities for optimisation.</li><li>Recommend cost-effective operational solutions without compromising service quality or contractual compliance.</li><li>Support alignment between commercial assumptions and actual operational requirements.</li><li>Contribute to cost reduction and efficiency initiatives across both live contracts and new bids/tenders.</li></ul><p><strong>Client &amp; Stakeholder Engagement</strong></p><ul><li>Engage with clients and key stakeholders to understand operational concerns and service expectations.</li><li>Support proactive resolution of service delivery issues.</li><li>Work closely with Operations, Technical, Commercial, Estimation, QHSE and other functional teams.</li><li>Promote a culture of continuous improvement, accountability and operational excellence across FM operations.</li></ul><p><strong>ESG &amp; Sustainability</strong></p><ul><li>Support sustainability and ESG initiatives across FM contracts.</li><li>Identify opportunities for improved energy efficiency, waste management and environmental performance.</li><li>Support compliance with environmental and sustainability requirements.</li><li>Contribute to relevant ESG, energy and sustainability reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in one of the following or a related discipline: Mechanical Engineering, Electrical Engineering, Industrial Engineering, Environmental Engineering, Building Services Engineering, Facilities/Asset Management Engineering</li><li>Minimum 8 10 years of relevant experience within Facility Management.</li><li>Strong experience in process improvement, operational excellence and/or Total Quality Management (TQM).</li><li>Demonstrable experience working directly with FM site operations.</li><li>Strong understanding of both Hard and Soft FM Services.</li><li>Experience conducting operational audits, quality assessments and performance reviews.</li><li>Experience managing SLA/KPI frameworks and corrective action processes.</li><li>Exposure to estimation, budgeting, resource optimisation and operational cost analysis is highly desirable.</li><li>Lean Six Sigma Black Belt highly preferred/required; Strong Lean Six Sigma Green Belt candidates with demonstrable process improvement experience may be considered.</li><li>ISO 9001 Internal Auditor certification preferred.</li><li>Recognised Facility Management certification is advantageous.</li><li>Candidates should demonstrate good working knowledge of: Hard Services / MEP maintenance, Soft Services operations, Asset and maintenance management, Cleaning standards and best practices, Waste management and environmental practices, Quality Management Systems, Root Cause Analysis, SLA and KPI development, Process mapping and optimisation, Cost and resource optimisation, CAFM/CMMS environments.</li><li>Knowledge of relevant international standards is advantageous, including: ISO 9001 Quality Management, ISO 14001 Environmental Management, ISO 41001 Facility Management, ISO 45001 Occupational Health &amp; Safety, ISO 50001 Energy Management Systems &amp; Tools.</li><li>Strong proficiency in: Microsoft Excel, Microsoft PowerPoint, Microsoft Word.</li><li>Experience with some of the following is advantageous: Power BI or similar data visualisation tools, Microsoft Visio or equivalent process mapping tools, CAFM/CMMS platforms, MS Project, Primavera P6, Monday.com, Asana, Jira, Trello, Root Cause Analysis tools including 5 Whys and Fishbone Analysis.</li><li>Highly proactive and comfortable working independently.</li><li>Field-driven with a strong understanding of actual site operations.</li><li>Analytical and data-driven.</li><li>Commercially aware and cost-conscious.</li><li>Confident challenging existing processes and operational practices.</li><li>Strong in problem-solving and Root Cause Analysis.</li><li>Capable of influencing operational teams and stakeholders.</li><li>Focused on measurable and sustainable improvement.</li><li>Able to manage multiple contracts, priorities and improvement initiatives simultaneously.</li><li>Strong in reporting, presentation and stakeholder communication.</li><li>The role requires an individual who can combine technical FM knowledge, process improvement expertise and commercial awareness to deliver measurable improvements in service quality, efficiency, compliance and cost performance.</li></ul>

<strong>Key Responsibilities</strong> <p></p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> </p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p> <p> </p> <p> <strong>Commissioning Experience</strong> </p> <p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> <strong>Inspection:</strong> <strong> </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p> <p> <strong>Commissioning:</strong> <strong> </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p> <p> <strong>Troubleshooting:</strong> <strong> </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p> <p> <strong>Repair &amp; Maintenance:</strong> <strong> </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p> <p> <strong>Overhauling:</strong> <strong> </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p> <p> <strong>Piping Systems:</strong> <strong> </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p>

???? Welcome to Your Next Adventure!<br><br>????‍♂️ The Magic You Bring<br><br>6+ years in a Dev Ops, Cloud Ops, or SRE role owning infrastructure for large-scale, distributed production systems Deep AWS expertise across multi-account environments — Organizations, IAM, VPC, ECS, RDS, Secrets Manager, and cost management tooling Advanced container orchestration experience, with strong hands-on ownership of ECS (EC2 capacity providers, task definition lifecycle, service autoscaling) and/or Kubernetes in production Production-grade database operations experience: schema migrations, performance tuning, connection management, and failover on Postgre SQL and/or other relational/NoSQL engines Proven track record designing and maintaining CI/CD pipelines (Git Hub Actions) across multi-team, multi-environment delivery workflows Fluency with observability stacks — metrics, logging, tracing, and alerting — using tools like Datadog, Prometheus/Grafana, or Open Search; experience reducing observability costs at scale is a plus Advanced IaC practice with Terraform or Pulumi: modular design, state management, drift detection, and multi-account rollouts Strong automation and tooling development skills in Python (primary) and/or Go; comfortable building internal platforms, not just scripts Solid networking fundamentals: DNS, load balancing, security groups, VPN, and the ability to diagnose production connectivity issues without a runbook Experience operating under compliance frameworks (PCI-DSS, SOC 2, ISO 27001) — building controls into infrastructure, not bolting them on afterward Comfortable working with engineering leadership to translate infrastructure decisions into business outcomes: availability, cost efficiency, and delivery velocity<br><br>Inside Snoonu’s Universe<br><br>Snoonu is Qatar’s homegrown Super App, reinventing daily life with blazing-fast delivery, shopping, and more – all in one place. Powered by tech, driven by a global team, and obsessed with making life easier.<br><br>The Dream We’re Chasing<br><br>To be the first Qatari Ultra App that propels the region and its community through innovation and technology. We have global ambitions where what we do surpasses norms and limitations every time.<br><br>The Quest We’re On<br><br>To radically transform how people live by leveraging technology to connect them with endless possibilities.<br><br>Our Everyday Superpowers<br><br>???? Be Customer Obsessed: “Focus on the customer and all else will follow.”<br><br>???? Act with Integrity: “We are honest, ethical, and trustworthy in everything we do.”<br><br>???? Be Curious and Creative: “We constantly innovate and create solutions to bring a lasting positive impact.”<br><br>????Lead by Example and Take Ownership: “Be the change you want to see and take ownership.”<br><br>???? Work Smart and Deliver Results: “You can do more by doing less, better, and faster.”<br><br>????‍???? It's All About People: “Be a team player; together we are stronger.”<br><br>Perks & Worklife Magic At Snoonu<br><br>???? Global Vibes – Collaborate with a worldwide crew.<br><br>???? Brain Boosters – Learning budgets, access to courses, and tools for your growth.<br><br>???? Builder’s Playground – Own your tasks, own your path! We’re big on autonomy.<br><br>????️ Flexible Time Off – We take recharging seriously. Generous leave and wellness policies.<br><br>????️ Agile Everything – Scrum isn’t a buzzword here. It’s how we roll, from product to ops.<br><br>Great Place to Work® Certified<br><br>We’re certified as a Great Place to Work®, a recognition that celebrates a culture we’ve built together where people come first, always. This certification reflects our commitment to creating a workplace where everyone feels valued, empowered, and inspired to do their best work.<br><br>Certified for Excellence<br><br>Our ISO 9001:2015 and ISO 45001:2018 certifications demonstrate our dedication to world-class quality and a safe, supportive workplace, reinforcing our promise to deliver exceptional service while prioritizing the wellbeing of our people.<br><br>Beyond the Code: Giving Back Matters<br><br>We don’t just build apps. We’re committed to doing business sustainably and giving back to the community that fuels us. From eco-conscious practices to CSR projects, we’re always finding ways to do better—and we invite you to be a part of that mission.<br><br>Diversity Isn’t Just a Buzzword<br><br>At Snoonu, fairness and inclusion are the foundation of everything we do. We’re proud to be an equal opportunity workplace that welcomes people from every walk of life. Be bold. Be you. Thrive here.<br><br>Let’s Build the Future Together<br><br>Apply now to join a team where your contributions spark a change and your voice is heard. Let’s make some magic together.<br><br>Stay in the loop—connect with us on Linked In!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>JOB PURPOSE:</strong> Run the machine at optimal speeds to meet the production schedule and quality standards</p> <p><b>KEY ACCOUNTABILITIES</b></p> <p>HSE</p> <ul> <li>Comply with relevant safety, quality and environmental control procedures and instructions</li> <li>Use personal protective equipment and safety gear when performing assigned tasks</li> <li>Keep operational areas clean and well organized to prevent incidents and accidents</li> <li>Maintain assigned tools, equipment and machinery in good working order</li> <li>Report unsafe acts, incidents or safety violations</li> </ul> <p>Production Workflow: Ensure that the resins are correctly mixed and the correct raw materials are available before beginning production to make quality pipes</p> <ul> <li>Ensure that the correct labels and marking meet standard / client specifications</li> <li>Comply with operational procedures and instructions when performing all job tasks and activities</li> <li>Report any accidents, problems, mistakes or non–conformities faced during production to the superior</li> <li>De-molding: Perform pre-curing and proper de-molding on products to minimize defects</li> <li>Maintain proper records for both molds and mandrels along with stenciling each to achieve proper identification</li> <li>Inspect the de-molded product to be able to offer it later to the online QC for final inspection</li> <li>Cool the related mandrel to reach the minimum required temperature</li> <li>Ensure the mandrels are ready for production without any delay to meet the committed schedule</li> <li>Hydro test: Monitor the machine operation as per the requirements and within its defined limitations to avoid any damage to the machine/tested item</li> <li>Set up and dismantle pipe testing heads and fittings blind flanges to ensure that no problem occurs during testing</li> <li>Test pipes in accordance with testing schedule and log the daily tests</li> <li>Select the correct rubbers rings, O-rings and flange per drilling standards to accelerate the testing process</li> <li>Apply the valid calibration dates on the gauges to meet QC testing requirement</li> <li>Calibration: Calibrate, build up, grind and cut pipes to required dimensions and quality standards</li> <li>Prevent wastage and rejections during calibration</li> <li>Track, log and report the daily output and post curing status to ensure production schedules are met</li> </ul> <p><strong>SPAN OF COMMUNICATION Internal:</strong> Production and QC Departments External: N/A</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div>

<p>JOB DESCRIPTION</p><p>COMMISSIONING ENGINEER</p><p><strong>Systems Coverage</strong></p><p><strong>Plan, test, and commission the following ELV systems:</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Security Systems: CCTV, Access Control, Intrusion Detection, Perimeter Security</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Fire Alarm &amp; Life Safety Systems: Fire Detection, Emergency Voice Evacuation, PA/VA systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Building Management Systems (BMS/BAS): HVAC controls, lighting control, energy monitoring</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Structured Cabling Systems: Fiber optic, copper (Cat6/6A), backbone and horizontal cabling</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Audiovisual Systems: Conference room AV, digital signage, background music</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ICT &amp; Network Systems: Active network equipment, Wi-Fi, LAN/WAN infrastructure</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Other ELV Systems: Intercom, master clock, nurse call, parking management, building automation</p><p><strong>Pre-Commissioning &amp; Testing</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Review ELV design drawings, schematics, and specifications</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct cable continuity, attenuation, and performance tests (OTDR, Fluke testing)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Perform point-to-point verification of all field devices</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Test system functionality in standalone mode before integration</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Verify grounding, bonding, and earthing for ELV systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Execute insulation resistance and megger tests</p><p><strong>Commissioning &amp; Integration</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Configure and program system controllers, servers, and workstations</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Integrate ELV systems with each other and with MEP systems via protocols (BACnet, Modbus, TCP/IP)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Set up and optimize software platforms for monitoring and control</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct end-to-end system performance tests</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Verify alarm management, reporting, and failover mechanisms</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Perform load testing and stress testing of network systems</p><p><strong>Documentation &amp; Handover</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare commissioning test reports, checklists, and certificates</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Update as-built drawings and system configuration documents</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Compile operation and maintenance manuals</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct client training sessions and system demonstrations</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ensure snag list clearance and defect-free handover</p><p><strong>Technical Skills &amp; Tools</strong></p><p><strong>Required Technical Competencies</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Proficiency with testing equipment: OTDR, cable certifier (Fluke DSX/DXT), multimeter, network analyzer</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience with commissioning software specific to ELV systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of IP networking, subnetting, VLAN configuration</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Understanding of integration protocols: BACnet, Modbus, KNX, LonWorks, OPC</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ability to interpret ELV shop drawings, riser diagrams, and SLDs</p><p><strong>Standards &amp; Compliance</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Familiarity with relevant standards: BICSI, TIA/EIA, ISO, NEC, local civil defense regulations</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of fire and safety codes related to ELV systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Understanding of cybersecurity basics for networked building systems</p><p><strong>Qualifications &amp; Experience</strong></p><p><strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Education</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bachelor’s degree in Electronics, Telecommunications, Electrical Engineering, or related field</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Diploma with substantial experience may be considered</p><p><strong>Certifications (Preferred)</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; BICSI RCDD, DCDC, or Technician</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Cisco CCNA/Networking certifications</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Manufacturer-specific certifications (e.g., Siemens, Honeywell, Schneider, Axis, Hikvision)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PMP or Commissioning-specific certifications (CxA, CBCP)</p><p><strong>Experience</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Minimum 5-7 years in ELV systems testing and commissioning</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hands-on experience with at least 4-5 major ELV systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Background in construction or MEP projects (high-rise, hospitals, airports, data centers, smart buildings)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience in managing commissioning for projects &gt;10,000 sq. meters</p><p>&nbsp;</p>