وظائف مهندس PLC في قطر

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>ELV ENGINEER POSITION (1)</b></p><p><br></p><p>Position: ELV Engineer</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p><b><i>Key Responsibilities:</i></b></p><ol><li>Operate, maintain, troubleshoot, and optimize ELV systems across commercial, residential, and mixed-use developments.</li><li>Perform preventive and corrective maintenance for Building Management Systems (BMS), CCTV, Access Control Systems (ACS), Public Address (PA), Structured Cabling, and Telecom systems.</li><li>Diagnose system faults, coordinate repairs, and ensure maximum system availability.</li><li>Support testing, commissioning, integration, and upgrades of ELV systems.</li><li>Liaise with clients, OEMs, subcontractors, and other engineering disciplines.</li><li>Review technical drawings, method statements, and maintenance procedures.</li><li>Prepare maintenance reports, incident reports, and technical documentation.</li><li>Ensure compliance with Qatar Civil Defence (QCDD), Kahramaa, client requirements, and relevant international standards.</li></ol><p><br></p><p><b><i>Requirements:</i></b></p><ol><li>Bachelor's degree in Electrical, Electronics, Communications Engineering, or a related discipline.</li><li>Minimum 5 years of experience in ELV systems within industrial facilities, commercial buildings, airports, hospitals, utilities, or large-scale infrastructure projects.</li><li>Facility Management (FM) experience in Qatar is highly preferred and will be considered a significant advantage.</li><li>Strong hands-on knowledge of:</li></ol><ul><li>Building Management Systems (BMS), CCTV Systems, Access Control Systems (ACS), Public Address (PA) Systems, Telecom &amp; Structured Cabling Systems, IP Networking fundamentals, Experience in troubleshooting and integrating multi-vendor ELV systems., Familiarity with fire alarm interfaces, HVAC controls, BACnet, Modbus, TCP/IP, and other communication protocols is an advantage., Ability to read and interpret technical drawings, schematics, and as-built documentation., Strong analytical, troubleshooting, and communication skills., Valid Qatar driving license is preferred.</li></ul><p><br></p><ol><li>Must be locally available in Qatar with a transferable visa and valid NOC.</li><li>Immediate joining is preferred.</li></ol><p><br></p><p><b><i>Preferred Experience:</i></b></p><p>Experience in large-scale Facility Management contracts., Exposure to CAFM/CMMS platforms., Experience working with leading OEMs such as, Honeywell, Siemens, Schneider Electric, Johnson Controls, Bosch, Hikvision, Genetec, Lenel, Gallagher, Avigilon, or similar., Knowledge of QCDD, Ashghal, and Qatar construction and FM standards is an added advantage.</p><p><br></p><p><b>ELECTRICAL ENGINEER POSITION (1)</b></p><p><br></p><p>Position: Electrical Engineer</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p>Key Responsibilities:</p><p>Design, maintain, and troubleshoot industrial electrical and automation systems.</p><p>Support commissioning, operation, and maintenance activities.</p><p>Prepare technical reports, drawings, and specifications.</p><p>Diagnose faults in PLCs, SCADA systems, MCCs, VFDs, and instrumentation.</p><p>Coordinate with operations and maintenance teams to improve system reliability.</p><p>Ensure compliance with applicable standards and safety requirements.</p><p>Requirements:</p><p>Bachelor's degree in Electrical Engineering.</p><p>Minimum 5 years of industrial experience in utilities, manufacturing, infrastructure, or oil &amp; gas sectors.</p><p>Strong knowledge of PLCs, SCADA, VFDs, industrial networks, and power distribution systems.</p><p>Experience in maintenance and troubleshooting of industrial equipment.</p><p>Good communication and teamwork skills.</p><p>Valid Qatar driving license is preferred.</p><p>Must be locally available in Qatar with transferable visa and NOC.</p><p>General Requirements for All Positions:</p><p>Immediate joining preferred.</p><p>Strong commitment to health, safety, and quality standards.</p><p>Proficiency in English; Arabic is an advantage.</p><p>Candidates must possess a transferable visa with a valid NOC in Qatar.</p><p><br></p><p><b>ELECTRICAL SUPERVISOR POSITION (1)</b></p><p><br></p><p>Position: Electrical Supervisor</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p>Key Responsibilities:</p><p>Supervise electrical maintenance and installation activities in industrial environments.</p><p>Manage electricians and technicians to ensure timely completion of maintenance works.</p><p>Troubleshoot electrical systems, motors, MCCs, VFDs, PLC panels, and control systems.</p><p>Ensure compliance with electrical safety standards and company procedures.</p><p>Coordinate shutdowns, preventive maintenance, and emergency interventions.</p><p>Prepare reports, maintenance records, and technical documentation.</p><p>Requirements:</p><p>Diploma or Bachelor's degree in Electrical Engineering or equivalent.</p><p>Minimum 5 years of industrial experience.</p><p>Strong knowledge of industrial power distribution, motors, PLCs, VFDs, and automation systems.</p><p>Experience with preventive and corrective maintenance.</p><p>Ability to lead teams and manage multiple tasks.</p><p>Valid Qatar driving license is an advantage.</p><p>Must be locally available in Qatar with transferable visa and NOC.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>ELV ENGINEER SKILLS: </b>Strong hands-on knowledge of:</p><p>Building Management Systems (BMS), CCTV Systems, Access Control Systems (ACS), Public Address (PA) Systems, Telecom &amp; Structured Cabling Systems, IP Networking fundamentals, Experience in troubleshooting and integrating multi-vendor ELV systems., Familiarity with fire alarm interfaces, HVAC controls, BACnet, Modbus, TCP/IP, and other communication protocols is an advantage., Ability to read and interpret technical drawings, schematics, and as-built documentation., Strong analytical, troubleshooting, and communication skills., Valid Qatar driving license is preferred.</p><p><br></p><p><b>ELECTRICAL ENGINEER AND ELECTRICAL SUPERVISOR SKILLS: </b>Strong knowledge of PLCs, SCADA, VFDs, industrial networks, and power distribution systems.</p><p>Experience in maintenance and troubleshooting of industrial equipment. Manage electricians and technicians to ensure timely completion of maintenance works.</p><p>Troubleshoot electrical systems, motors, MCCs, VFDs, PLC panels, and control systems.</p><p>Ensure compliance with electrical safety standards and company procedures.</p><p>Coordinate shutdowns, preventive maintenance, and emergency interventions.</p><p>Prepare reports, maintenance records, and technical documentation.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Commissions the preparation and the implementation of necessary operational security software updates, firewall installation, hardware additions, and any authorized technical changes related to the security functions to ensure compliance both with internal security policies etc. and applicable laws and regulations required security levels.</p><p>Design and manage processes for detection, investigation, correction, and/or prosecution of operational security breaches, violations, and incidents.</p><p>Benchmark, analyze report on, and make recommendations for the improvement of Operational Technology (OT) security infrastructure.</p><p>Works with management to ensure that as new equipment, facilities, services, and systems are installed that the OT security issues are addressed.</p><p>Typically, a background in technical Operational Technology (OT) roles such as architecture, security program development or operations, with a clear and abiding interest in operational security.</p><p>Liaison with and offers technical direction to related operational security governance functions (such as Physical Security/Facilities, Risk Management, Legal and Compliance) plus senior and middle managers throughout the organization as necessary, on information security matters such as routine security activities plus emerging security risks and control technologies.</p><p>Plan, implement and upgrade security measures and controls.</p><p>Protect digital files and operational security systems against unauthorized access, modification, or destruction.</p><p>Maintain data and monitor/review security access authorizations.</p><p>Manage network, intrusion detection and prevention systems.</p><p>Work out on the security tools such as security asset inventory management and risk management reporting to security information and event management system (SIEM).</p><p>Define, implement, and maintain corporate security manuals, policies, procedures &amp; instructions.</p><p>Coordinate further security plans, awareness received from vendors and take required actions.</p><p>Security assessments of network infrastructure, hosts and applications.</p><p>Work out on ICS security related audit findings and maintain corrective actions.</p><p>Download, validate and apply the latest Antivirus DAT file to AV server and ensure published to all ICS machines by continuously monitor the AV server dashboard.</p><p>Asset identification, monitoring and analysis using supportive tools (IPS, firewall log, system events and antivirus reports.</p><p>ICS Firewall Events log, DNS, Router, and switches Events log analysis.</p><p>Validation and deployment of firmware and software updates, deactivate of unnecessary software's or access.</p><p>Define and implement backup schedule for all ICS assets, System configuration backups, Machines image backups, Router and switches backups, FW backups.</p><p>Manage User accounts ICS, network, and security equipment.</p><p>Support Project execution team to integrate new Operational Technology (OT) system in Plant security framework.</p><p>Work out on Audit findings and observations.</p><p>Work out with ICS modifications as requested.</p><p>Collect and archive system logs, events, change logs, failure events etc. To support audit and forensic analysis.</p><p>Ensure that all implementation activities are complied with published ICS policies, instructions, procedures,</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Bachelor's Degree</b> in Information security Technology, Computer Science or Electronic/Electrical Engineer. <br>Must be ICS certified from SANS, however following certificates will be great additional advantage for the candidate: - <br><br>GIAC GICSP (Global Industrial Cybersecurity Professional). <br>ISA CAP (Certified Automation Professional). <br>Cybersecurity for Automation, Control, and SCADA Systems (ISA-99/IEC-62443) - ISA <br>Advanced SCADA Security - Red Tiger/ any other vendor. <br>Industrial Cybersecurity for OPC - Matrikon/any other vendor. <br>OPC-UA Hands-on Training Level-3 - OPCTI. <br><br><br>3-5 years at least of field experience in OT Cybersecurity domain in Oil &amp; gas &amp; petrochemical industry. <br>Excellent knowledge of common IT/OT ICS specialization areas related to PLC's, DCS's, PDCS, Firewalls, networks, and switches. <br>Exposure of implementing IT/OT security policies and regulations. <br>Knowledge of international &amp; national standards frameworks such as ISA99, IEC62433, IEC61511, IEC62351, IEC62591 ISO27001, 27002, 27005 Compliance regulations. <br>Extensive knowledge of several ICS DCS/PDCS/PLC/ESD/Servers, routers, switches &amp; firewalls technologies within several OEM technologies such as, Siemens, HIMA, TRICONEX, HONEYWELL, GE, Allan Bradley, CISCO, MacAfee.</p></section>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><h3>Job Description:</h3><p>Parsons is looking for an amazingly talented Senior Instrumentation Engineer to join our team in Qatar! In this role, you will lead the supervision of instrumentation, control and automation works on a major roads, infrastructure and drainage programme. The works include surface-water and foul-sewer pump stations, attenuation tanks, rising mains, drainage networks and associated PLC, SCADA, HMI, monitoring, protection and control systems.</p><h3>What You'll Be Doing:</h3><ul><li>Lead the consultant-side supervision of instrumentation, control and automation works across both work packages, with particular responsibility for pumping-station systems.</li><li>Review the Contractor s instrumentation and control shop drawings, calculations, material submittals, method statements, Inspection and Test Plans, control philosophies, cause-and-effect documents and technical submissions.</li><li>Supervise the installation, interfacing, testing and commissioning of field instruments on pump inlets, outlets, rising mains, tanks, chambers and associated infrastructure.</li><li>Verify the installation and operation of level, flow, pressure, vibration, conductivity and other monitoring and protection devices required by the approved design.</li><li>Review PLC, SCADA and HMI architecture, panel arrangements, input and output schedules, communications, alarms, interlocks, data logging and reporting requirements.</li><li>Verify that hardwired and software interlocks provide the required pump protection and safe operation, including low-level, no-flow, high-pressure and flood-alarm functions.</li><li>Review interfaces between field instrumentation, VFD or soft-starter panels, main PLCs, local SCADA, remote systems and associated electrical and mechanical equipment.</li><li>Coordinate instrumentation requirements with the mechanical, electrical, civil, structural, process, SCADA, communications and commissioning teams.</li><li>Witness factory inspections, Factory Acceptance Tests, Site Acceptance Tests, loop checks, calibration, point-to-point testing, functional testing and integrated system testing.</li><li>Review the Contractor s testing and commissioning procedures, schedules, readiness documentation and system integration plans.</li><li>Monitor installation quality, cable termination, tagging, calibration, configuration, preservation and protection of instrumentation and control equipment.</li><li>Review technical queries, proposed substitutions, software or configuration changes and site constraints, and provide recommendations to the Resident Engineer and supervision team.</li><li>Raise and track site observations and Non-Conformance Reports, review corrective actions and verify satisfactory close-out.</li><li>Review operation and maintenance manuals, training materials, spare-parts schedules, special tools, software, asset data, as-built drawings and handover dossiers.</li><li>Support performance demonstrations, operator training, final handover and inspections during the maintenance period.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Instrumentation Engineering, Control and Automation Engineering, Electrical Engineering, Electronics Engineering or an equivalent relevant discipline.</li><li>More than 14 years of post-graduate professional experience, including at least 10 years of experience in a similar senior instrumentation, control or automation role.</li><li>Professional experience in the Middle East is required.</li><li>Substantial experience working for an engineering consultant or Engineer s Representative on major infrastructure, drainage or pumping-station construction-supervision assignments.</li><li>Demonstrable experience supervising instrumentation, control and automation systems for surface-water, stormwater, wastewater or foul-sewer pumping stations.</li><li>Experience with PLC, SCADA, HMI, industrial communications, field instrumentation, alarms, interlocks, data logging and automated pump-station operation.</li><li>Experience with level, flow, pressure, vibration, conductivity and other process-monitoring and protection instruments.</li><li>Experience reviewing shop drawings, instrument schedules, input and output lists, control philosophies, cause-and-effect documents, material submittals, method statements and Inspection and Test Plans.</li><li>Practical experience witnessing Factory Acceptance Tests, Site Acceptance Tests, calibration, loop checks, point-to-point tests, functional tests and integrated system testing.</li><li>Experience coordinating instrumentation interfaces with mechanical, electrical, SCADA, communications and control systems.</li><li>Thorough knowledge of applicable Qatar Construction Specifications, Authority ICA requirements, contract requirements and relevant international instrumentation and control standards.</li><li>Ability to manage and coordinate a specialised instrumentation function and independently perform complex professional assignments requiring the application of specialist principles.</li><li>Professional registration or chartered status is preferred.</li><li>MME engineering certification is required for personnel deployed under the contract. An overseas recruit who does not hold the certification at mobilisation must obtain it within the period permitted by the contract.</li><li>Fluent written and spoken English, with strong technical reporting, correspondence, presentation and stakeholder-communication skills.</li><li>Full computer literacy and the ability to use relevant engineering, configuration, reporting, document-control and project-information systems.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>* To execute the day-to-day ICS activities related to the operational technology security in the plants by managing the design and overseeing the implementation of all security measures linked to ICS applications and systems, conducting risk assessment and developing contingency plans to mitigate any foreseeable security threats and protect the confidentiality and integrity of employee, customer and business information in compliance with ICS cybersecurity policies , instructions, manuals and standards.</p><br><br><p>* Commissions the preparation and the implementation of necessary operational security software updates, firewall installation, hardware additions, and any authorized technical changes related to the security functions to ensure compliance both with internal security policies etc. and applicable laws and regulations required security levels.* Design and manage processes for detection, investigation, correction, and/or prosecution of operational security breaches, violations, and incidents.<br>* Benchmark, analyze report on, and make recommendations for the improvement of Operational Technology (OT) security infrastructure.* Works with management to ensure that as new equipment, facilities, services, and systems are installed that the OT security issues are addressed.<br>* Typically, a background in technical Operational Technology (OT) roles such as architecture, security program development or operations, with a clear and abiding interest in operational security.* Liaison with and offers technical direction to related operational security governance functions (such as Physical Security/Facilities, Risk Management, Legal and Compliance) plus senior and middle managers throughout the organization as necessary, on information security matters such as routine security activities plus emerging security risks and control technologies.<br>* Plan, implement and upgrade security measures and controls.* Protect digital files and operational security systems against unauthorized access, modification, or destruction.<br>* Maintain data and monitor/review security access authorizations.* Manage network, intrusion detection and prevention systems.<br>* Work out on the security tools such as security asset inventory management and risk management reporting to security information and event management system (SIEM).* Define, implement, and maintain corporate security manuals, policies, procedures &amp; instructions.<br>* Coordinate further security plans, awareness received from vendors and take required actions.* Security assessments of network infrastructure, hosts and applications.<br>* Work out on ICS security related audit findings and maintain corrective actions.* Download, validate and apply the latest Antivirus DAT file to AV server and ensure published to all ICS machines by continuously monitor the AV server dashboard.<br>* Asset identification, monitoring and analysis using supportive tools (IPS, firewall log, system events and antivirus reports.* ICS Firewall Events log, DNS, Router, and switches Events log analysis.<br>* Validation and deployment of firmware and software updates, deactivate of unnecessary software's or access.* Define and implement backup schedule for all ICS assets, System configuration backups, Machines image backups, Router and switches backups, FW backups.<br>* Manage User accounts ICS, network, and security equipment.* Support Project execution team to integrate new Operational Technology (OT) system in Plant security framework.<br>* Work out on Audit findings and observations.* Work out with ICS modifications as requested.<br>* Collect and archive system logs, events, change logs, failure events etc. To support audit and forensic analysis.* Ensure that all implementation activities are complied with published ICS policies, instructions, procedures,</p><br><br><ul> <li>Bachelor's Degree in Information security Technology, Computer Science or Electronic/Electrical Engineer.</li> <li>Must be ICS certified from SANS, however following certificates will be great additional advantage for the candidate: - <ul> <li>GIAC GICSP (Global Industrial Cybersecurity Professional).</li> <li>ISA CAP (Certified Automation Professional).</li> <li>Cybersecurity for Automation, Control, and SCADA Systems (ISA-99/IEC-62443) - ISA</li> <li>Advanced SCADA Security - Red Tiger/ any other vendor.</li> <li>Industrial Cybersecurity for OPC - Matrikon/any other vendor.</li> <li>OPC-UA Hands-on Training Level-3 - OPCTI.</li> </ul> </li> <li>3-5 years at least of field experience in OT Cybersecurity domain in Oil &amp; gas &amp; petrochemical industry.</li> <li>Excellent knowledge of common IT/OT ICS specialization areas related to PLC's, DCS's, PDCS, Firewalls, networks, and switches.</li> <li>Exposure of implementing IT/OT security policies and regulations.</li> <li>Knowledge of international &amp; national standards frameworks such as ISA99, IEC62433, IEC61511, IEC62351, IEC62591 ISO27001, 27002, 27005 Compliance regulations.</li> <li>Extensive knowledge of several ICS DCS/PDCS/PLC/ESD/Servers, routers, switches &amp; firewalls technologies within several OEM technologies such as, Siemens, HIMA, TRICONEX, HONEYWELL, GE, Allan Bradley, CISCO, MacAfee.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR Plus allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary :</strong></p><br><p>We are looking for an Industrial Automation Engineer with hands-on experience in PLC, HMI, and SCADA programming, testing, and commissioning across Water &amp; Wastewater, HVAC, Oil &amp; Gas, and other industries. The ideal candidate should be able to work independently, manage tasks effectively, deliver excellent customer service, and demonstrate a strong willingness to learn, grow, and advance professionally.</p><br><p><strong>Roles &amp; Responsibilities :</strong></p><br><ul><li>Develop and execute PLC programs and test plans to ensure reliable and functional automation systems.</li><li>Develop SCADA/HMI graphics and implement automation solutions based on client requirements.</li><li>Perform pre-commissioning activities, including cable termination verification, loop checking, and related checks.</li><li>Conduct field testing, commissioning, and SAT at client sites.</li><li>Prepare and maintain project documentation, including functional specifications, I/O lists, and system architecture diagrams.</li><li>Maintain proper software versions, programming tools, and program backups.</li><li>Provide technical support, troubleshooting, and root cause analysis for automation systems.</li><li>Understand task requirements and apply appropriate technical skills and knowledge to deliver solutions.</li><li>Manage medium to high-complexity tasks in accordance with defined standards and procedures.</li><li>Document procedures, findings, root causes, and recommendations for completed tasks.</li><li>Work closely with Sales and Project teams to understand client requirements and develop suitable solutions.</li><li>Demonstrate resilience, persistence, attention to detail, and strong organizational skills.</li><li>Maintain excellent interpersonal, consulting, communication, and technical presentation skills.</li></ul><p><strong>QHSE Responsibilities :</strong></p><br><ul><li>Comply with all QHSE standards, policies, and procedures relevant to your work.</li><li>Actively participate in QHSE meetings and complete all required safety inductions and trainings.</li><li>Identify and report unsafe conditions; take corrective action where possible within your scope.</li><li>Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly.</li><li>Support a safe work environment by cooperating with safety practices and encouraging others to do the same.</li></ul> </div>

<p>We are seeking a skilled and motivated Automation Engineer with hands-on experience in Siemens S7-1200 and S7-1500 PLC systems. The ideal candidate will be responsible for designing, programming, commissioning, troubleshooting, and maintaining industrial automation systems. This role requires strong technical knowledge of PLC programming, HMI/SCADA integration, industrial communication protocols, and field commissioning.</p><p>Key Responsibilities</p><ul><li><p>Develop, program, and troubleshoot Siemens S7-1200 and S7-1500 PLC applications using TIA Portal.</p></li><li><p>Design, configure, and commission automation systems for industrial processes and machinery.</p></li><li><p>Develop and modify HMI applications using Siemens WinCC.</p></li><li><p>Configure industrial communication networks such as PROFINET, PROFIBUS, Modbus TCP/RTU, and Ethernet/IP where applicable.</p></li><li><p>Perform PLC I/O checks, FAT (Factory Acceptance Test), SAT (Site Acceptance Test), and on-site commissioning.</p></li><li><p>Diagnose and resolve control system issues to minimize equipment downtime.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Good knowledge in Siemens S7 1200, S71500 , Immediate Joiners are preferable</p>

ABEC is a leading specialist in Building and Energy Management Systems (BMS and EMS), delivering intelligent solutions that help organisations optimise their buildings, reduce energy consumption, and enhance sustainability performance. With a strong reputation for technical expertise and customer service, we partner with clients across multiple sectors, including commercial real estate, healthcare, education, data centres, retail, and industrial facilities.<br>Our core product and service lines include:New Build BMS & PMS Projects (Contracting) BMS & PMS Maintenance, Remote Services, and Monitoring Special Projects in existing buildings (for Facilities Managers and End Users) Energy Contracts and Energy Efficiency Projects Smart Buildings Solutions (Analytics & IoT)<br>Purpose of the role:<br>To design solutions for control automation and monitoring projects (BMS, PLC, SCADA, Power Monitoring/Metering).<br>Design Engineer (sometimes referred to as System Architect) will focus on and drive innovation in engineering methods, tools, and processes. To be able to deliver the design stage of BMS/PMS control automation and monitoring projects across the Middle East, from consultant specification through to issued technical design documentation ready for construction and commissioning handover, also if required to be able to produce software code and graphics.<br>Key Responsibilities:<br>Interface between the bid team and the project delivery team, providing input into New Projects bid opportunities. Take responsibility for the project solution in terms of design, including interfacing with external suppliers/customers and internal stakeholders. Support the Project Manager and Lead Engineer on project design and engineering implementation processes. Provide support to the wider engineering team regarding tools, techniques, and process improvements to ensure delivery on time, to budget, and effectively. Ensure all design information is available, and appropriate design documentation is completed, issued, and approved. Maintain accurate and timely communication with the ABEC Project Manager, Engineering Manager, and wider engineering team. Accurately record tasks on timesheets and complete expense claims on time. Provide regular progress updates to Project Managers, Engineering Manager, and Technical Support Managers. Maintain work efficiency to complete tasks within, or ahead of, allocated time frames/schedules. Consider and review alternative engineering methods, tools, and processes to improve quality and cost. Ensure standards of workmanship are consistently of the highest quality.<br>Act as a Subject Matter Expert (SME) for BMS/PLC/SCADA/EPMS systems, providing advanced technical expertise.<br>Mentor and support junior engineers and Solutions Architects, sharing knowledge and best practice.<br>Lead on technical solution design for complex and major projects, including providing strategic input during bids.<br>Recommend and introduce engineering methodologies, tools, and processes that drive improvements in quality, cost efficiency, and profitability.<br>Represent ABEC as a senior technical authority with customers, contractors, and suppliers.

Location: Doha, Qatar Employment Type: 6 months Contract (Extendable) Salary: 16,000.00 QAR Full Package Experience Required: 10+ years Our client, a leading technology and systems integration company in Qatar, is seeking an experienced Senior Win CC OA Engineer to join their team. Key Responsibilities Lead Win CC OA SCADA application engineering, configuration, testing, and commissioning. Develop and manage datapoints, panels, graphics, alarms, events, trends, scripts, reports, and historian interfaces. Support Master SCADA integration with PLC, RTU, BMS, EPMS, ELV, Safety & Security, and third-party systems. Perform I/O signal mapping, datapoint mapping, command/feedback validation, alarm/event configuration, and interface testing. Support integration using OPC UA, Modbus TCP/RTU, BACnet, MQTT, API/SDK, SQL, Profinet, Profibus, and Ethernet/IP. Review/support FDS, LLD, system architecture, interface matrix, points list, alarm matrix, test procedures, as-builts, and commissioning documents. Lead/support FAT, SAT, integrated testing, performance validation, troubleshooting, commissioning, and final handover. Coordinate with client, consultant, OEM, system integrator, PLC/automation, BMS, ICT/network, cybersecurity, and site teams. Ensure SCADA application quality, naming standards, graphics standards, backup control, change management, and technical governance. Required Experience and Skills Degree / Diploma in Electrical, Electronics, Instrumentation, Automation, Control Systems, Computer Science, or related discipline.10+ years in SCADA / OT automation engineering, with strong hands-on experience in Siemens Win CC OA. Strong hands-on experience in Siemens Win CC OA engineering and configuration. Proven experience in large-scale SCADA / Master SCADA / command center / infrastructure / smart city / utility / oil & gas / transportation projects. Strong knowledge of SCADA architecture, redundancy, client-server systems, distributed systems, historian, alarms, trends, graphics, and reporting. Experience in multi-vendor PLC/RTU/SCADA/BMS/ELV integration. Ability to troubleshoot communication, datapoint, graphics, alarm, historian, database, and system performance issues. Strong documentation, coordination, leadership, and client-facing communication skills. Preferred Win CC OA certification or Siemens SCADA project experience. Experience in brownfield migration, live system integration, high-availability SCADA, and citywide/infrastructure projects. Knowledge of OT networking, VLANs, firewall ports, redundancy testing, system backups, cybersecurity basics, and disaster recovery. Please note that applicants should answer the pre-screening questions to be considered for this position THOSE WHO CAN JOIN IMMEDIATELY SHOULD APPLY. REGRETTABLY ONLY SHORTLISTED CANDIDATES WILL BE CONTACTEDAbout Job Hub Global At Job Hub Global, we believe that people are at the heart of every great organization. As a premier HR consultancy, we are passionate about helping businesses thrive by providing bespoke recruitment, staff outsourcing, workforce solutions, and HR management consultancy services that are tailored to meet your unique needs. With a deep understanding of the evolving workplace, we are committed to connecting exceptional talent with exceptional companies. Our mission is to empower businesses with the right people, processes, and strategies to drive success. Whether you’re looking to build a high-performing team, streamline your workforce, or navigate the complexities of HR management, Job Hub Global is here to partner with you every step of the way. Together, we’ll turn challenges into opportunities and dreams into achievements. Your success is our busines

{"en":"<p> Hiring: Control &amp; Instrumentation Maintenance Engineer | Qatar </p> <p> Location: Qatar </p> <p> Contract Duration: 12 Months Extendable </p> <p> Candidates must be locally available in Qatar </p> <p> Key Requirements: </p> <p> Strong experience in Control &amp; Instrumentation Maintenance. </p> <p> Troubleshooting of control valves, transmitters, analyzers, and field instruments. </p> <p> Hands-on experience in DCS &amp; PLC maintenance/troubleshooting. </p> <p> Experience in control valve overhauling and testing. </p> <p> Good knowledge of P&amp;ID, PFD, wiring diagrams, system architecture, and functional diagrams. </p> <p> Experience working with contractors, vendors, and subcontractors. </p> <p> Experience in instrumentation, communication, digital control, and networked subsystems. </p> <p> Oil &amp; Gas / Petrochemical / Refinery experience is preferred.<span style="font-size: 11px;">:</span></p> <p> (Control &amp; Instrumentation). </p> <p> . </p> <p> DCS PLC. </p> <p> Control Valves. </p> <p> P&amp;ID PFD . </p> <p> .</p>

We’re Hiring: Instrumentation Design Engineer Location: Doha, Qatar Industry: Oil & Gas / EPC<br>Job Summary We are looking for an experienced Instrumentation Design Engineer to prepare detailed engineering deliverables for oil & gas projects and ensure compliance with project specifications and international standards.<br>Key Responsibilities Prepare instrument index, I/O list, loop diagrams, hook-ups, cable schedules, and JB layouts Develop and review P&IDs in coordination with multidisciplinary teams Perform instrument sizing and material take-offs (MTO) Review vendor documents and support procurement activities Ensure compliance with IEC, ISA, and API standards Provide support during installation and commissioning phases<br>Requirements Bachelor’s Degree in Instrumentation / Electrical Engineering5+ years of experience in Oil & Gas / EPC projects Strong knowledge of DCS, PLC, Auto CAD, and SPIExcellent coordination and technical skills

Dear Candidate,Greetings from Brunel Energy. We are currently hiring for an OT Cyber Security Engineer for a well-known Oil & Gas company in Qatar. Position: OT Cyber Security Engineer Location: Qatar Employment Type: Permanent Work Schedule: 8 Hours / 5 Days per Week<br>Bachelor’s degree in automation and control systems, industrial control system, Cyber Security, or computer science engineering. Knowledge and/or Experience4 years’ experience in engineering in oil and gas environment. Understanding of different operational technologies environment for example DCS, SIS, metering, machinery monitoring / controls systems, and Instrument asset management systems. Understanding of OT Infrastructure communication and protocols. Knowledge of OT Cyber Security Infrastructure and solutions such as Endpoint Protection Platforms, Industrial Networks and boundaries protection, OT IDS, SIEM, Authentication and Access control, etc. Familiar with industry- specific regulations and standards that impact Operational Technology Cyber Security such us (IEC, ISA, NIST, ISO).<br>Interested relevant candidate may share the resume on r.rohit@brunel.net with the below following details:-<br>Full Name as per Passport:Date of Birth:Nationality:Highest Educational Qualification:Direct Mobile / Whats App Number:Marital Status:Dependents:MS Teams ID:Notice Period:Current Location:Point of Origin:Current Salary:Expected Salary:<br>Please confirm the following:Do you have 4+ years of Oil & Gas engineering experience, with substantial experience in OT/ICS Cyber Security? - Have you worked hands-on with DCS, SIS, PLC, SCADA, or other Industrial Control Systems, rather than exclusively in IT Cyber Security? - Do you have experience designing or supporting OT network architecture, network segmentation, industrial firewalls, OT IDS, and secure OT infrastructure? - Have you supported FAT/SAT, commissioning, incident management, troubleshooting, and project execution for OT Cyber Security systems? - <br><br>Regards,Rohit Brunel

Dear Candidate,Greetings from Brunel Energy. We are currently hiring for an OT Cyber Security Engineer for a well-known Oil & Gas company in Qatar. Position: OT Cyber Security Engineer Location: Qatar Employment Type: Permanent Work Schedule: 8 Hours / 5 Days per Week<br>Bachelor’s degree in automation and control systems, industrial control system, Cyber Security, or computer science engineering. Knowledge and/or Experience4 years’ experience in engineering in oil and gas environment. Understanding of different operational technologies environment for example DCS, SIS, metering, machinery monitoring / controls systems, and Instrument asset management systems. Understanding of OT Infrastructure communication and protocols. Knowledge of OT Cyber Security Infrastructure and solutions such as Endpoint Protection Platforms, Industrial Networks and boundaries protection, OT IDS, SIEM, Authentication and Access control, etc. Familiar with industry- specific regulations and standards that impact Operational Technology Cyber Security such us (IEC, ISA, NIST, ISO).<br>Interested relevant candidate may share the resume on r.rohit@brunel.net with the below following details:-<br>Full Name as per Passport:Date of Birth:Nationality:Highest Educational Qualification:Direct Mobile / Whats App Number:Marital Status:Dependents:MS Teams ID:Notice Period:Current Location:Point of Origin:Current Salary:Expected Salary:<br>Please confirm the following:Do you have 4+ years of Oil & Gas engineering experience, with substantial experience in OT/ICS Cyber Security? - Have you worked hands-on with DCS, SIS, PLC, SCADA, or other Industrial Control Systems, rather than exclusively in IT Cyber Security? - Do you have experience designing or supporting OT network architecture, network segmentation, industrial firewalls, OT IDS, and secure OT infrastructure? - Have you supported FAT/SAT, commissioning, incident management, troubleshooting, and project execution for OT Cyber Security systems? - <br><br>Regards,Rohit Brunel

Primary Purpose Of The Job<br><br>Carries out troubleshooting, maintenance, repair, overhaul and calibration of different types of field instruments installed in any plant/unit of Qatar Energy Refinery as assigned by Lead Instrument Engineer.<br><br>Required Experience And Skills<br><br>At least 6 years of experience as Instrument technician in Refinery, Oil & Gas or petrochemical industry with sound knowledge in measurement principles, installation, commissioning, maintenance and overhauling of various field instruments. Knowledge on hazardous area classification, smart field instruments interface with DCS and PLC is desirable. Knowledge about International Standards and Best practices of Instrumentation in Refining, Oil& Gas and Petrochemical Industries is an added advantage. Should be highly proficient and have excellent command in spoken/written English. Work experience in the Arabian Gulf Countries is desirable.<br><br>Educational Qualifications<br><br>Diploma in Instrumentation/Control Systems Engineering from a well recognized College/University.

Reports To: Maintenance Engineer Company: Qatar Fabrication Company Location: Ras Laffan, Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions The Maintenance Supervisor oversees a technical team of maintenance foremen and technicians to efficiently execute all maintenance work orders or job cards as directed by the Engineer/Planner. Integral to this role is ensuring strict compliance with the SAP PM plan and addressing specific site requirements for maintenance tasks. Additionally, the Supervisor is responsible for accurate data entry and completion of work orders. Solid trade knowledge and technical skills are essential for promptly attending to, addressing, and resolving equipment failures.<br>1) Site Management:Lead, mentor, and motivate a team of maintenance foremen and technicians to ensure the effective execution of maintenance tasks. Provide technical guidance and support to team members, fostering a culture of continuous improvement and collaboration.<br>For Mobile Plant equipment and Utilities:a) Responsible to maintain all Fixed equipment such as but not limited to CNC Equipment, PLC based Equipment, Hydraulic Equipment, other pre-fabrication machinery, welding machines, blasting, and painting equipment.b) Responsible for maintaining all portable equipment such as but not limited to welding machines, grinders, chipping guns, torches, welding ovens, rollers, manipulators.c) Responsible for maintaining mobile plant equipment such as but not limited to forklifts, MEWPs, cleaning machines, air compressors, generators, and other material handling equipment.d) Responsible to maintain Equipment in all the workshop facilities.e) Responsible for maintaining all mechanical utilities in all the workshop facilities and exterior of the yard such as utility lines and appliances.<br> For Transportation and Lifting Equipmenta) Responsible for the maintenance of all lifting and transportation equipment such as but not limited to electric overhead cranes, portal JIB cranes, all terrain and rough terrain mobile cranes, crawler cranes, shipyard transporters, self-propelled modular transporters.b) Responsible for the maintenance of all portable geared and powered lifting appliances such electric hoists, chain hoists, hydraulic jacks, pedestal jacks, load cells. Conduct TBT and work preparatory instructions to the workforce to ensure compliance to QFAB's QHSES requirements. Facilitate PTW requirements, energy isolation, HIT card and relevant safety measures as applicable. Collaborate with Maintenance Engineer in case of assistance required for maintenance quality measurement and use of precision or special tools.<br>2) Maintenance Work Orders Execution:Supervise the timely and efficient execution of all maintenance work orders or job cards assigned by the Engineer for the Planner group. Ensure that maintenance tasks are completed according to established procedures, safety guidelines, and quality standards. All manhours and resource utilization for the work order must be recorded in SAP PM WO followed by review of the Maintenance Engineer Provide spare parts and external service request to Maintenance Engineer for review and necessary action. Work order completion report to be submitted to Maintenance Engineer with all findings, actions and pending items if any. Adhere to department maintenance workflow process.<br>3) Compliance with SAP PM Plan:Enforce strict adherence to the SAP PM plan for maintenance activities, including scheduling, execution, and documentation. Monitor team performance to ensure compliance with work order requirements and deadlines.<br>4) Addressing Equipment Failures:Utilize solid trade knowledge and technical skills to promptly attend to, address, and resolve equipment failures. Collaborate with maintenance team members and other stakeholders to diagnose issues and implement effective solutions. Respond to breakdown notification and address the issues by troubleshooting and repair. Obtain technical guidance from Maintenance Engineer as and when required.<br>5) Data Entry and Completion:Oversee accurate data entry and completion for work orders in the SAP PM system, including updating work status and recording observations. Conduct regular verification of work order data to ensure accuracy and completeness.<br>6) Communication with work groups:Closely engage with Production supervisor for equipment malfunction, observations and cascade the information to Maintenance Engineer for improvements. Coordinate with production supervisor to align equipment availability and utilization plan to determine maintenance window and condition assessment.<br>Qualifications, Experience and Skills<br>Qualifications:Diploma with relevant years of work experience (in Mechanical/ Electrical/ Instrumentation/ Mechatronics).<br>Experience: 4+ Years of relevant industrial experience in the maintenance department.

<p>We are seeking an experienced PCS 7 / Siemens Failsafe Safety System Engineer for an Offshore Project to support site commissioning activities for industrial automation and process control systems. The ideal candidate must have strong expertise in Siemens PCS 7 DCS , Failsafe Safety Systems (F-Systems) , commissioning, testing, troubleshooting, and startup support within Oil &amp; Gas offshore environments Key Responsibilities Hardware Perform control panel and cabinet inspection in offshore environments. Verify wiring as per electrical drawings and loop diagrams. Execute loop checking and I/O verification. Support Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). Verify field instrumentation and communication with control systems. Coordinate with offshore site teams and customers during commissioning activities. Software Configure and modify Siemens PCS 7 control logic. Develop and modify Failsafe (F-CPU) safety logic as per project requirements. Perform logic testing, sequence testing, and functional testing. Configure and modify HMI/OS graphics and operator interfaces. Troubleshoot hardware, software, and communication issues. Support startup, commissioning, and system handover activities. Prepare commissioning reports and technical documentation.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong experience with Siemens PCS 7 Distributed Control System (DCS).</li><li>Hands-on experience with Siemens Failsafe Safety Systems (F-CPU/F-Systems).</li><li>Knowledge of Safety Instrumented Systems (SIS).</li><li>Experience in FAT, SAT, loop checking, and commissioning.</li><li>Expertise in troubleshooting DCS, PLC, and field instrumentation.</li><li>Familiarity with Profibus, Profinet, Industrial Ethernet, and other industrial communication protocols.</li><li>Good understanding of P&amp;IDs, Cause &amp; Effect diagrams, Logic Diagrams, and Instrument Loop Drawings.</li><li>Excellent analytical, troubleshooting, and communication skills.</li><li>Preferred Industry Experience Offshore Oil &amp; Gas Petrochemical Chemical Power Refinery Process Automation</li><li>Qualification Bachelor's Degree or Diploma in Instrumentation, Electronics, Electrical, or Control Engineering.</li><li>Experience Minimum 4 years of relevant experience in Siemens PCS 7 and Failsafe Safety Systems.</li><li>Hands-on experience in commissioning, startup, and troubleshooting of industrial automation systems is mandatory</li></ul>

<p>We are hiring a Senior OT Cyber Security Engineer for an LNG project in Qatar.</p><p>Key Responsibilities:</p><ul><li><p>Perform OT Cyber Security engineering, studies, design and execution support for onshore and offshore OT/ICS infrastructure.</p></li><li><p>Develop and review OT Cyber Security solutions covering DCS, SIS, SCADA, PLC, ICSS, industrial networks, endpoint protection, network/boundary protection, OT IDS, SIEM, authentication and access control.</p></li><li><p>Support engineering studies including feasibility assessments, cost estimates, technical evaluations, solution development and secure-by-design reviews.</p></li><li><p>Support project execution activities including technical queries, engineering/design reviews, FAT, SAT, commissioning, system handover and cybersecurity verification.</p></li><li><p>Participate in OT Cyber Security risk assessments, audits, cold-eye reviews, gap assessments and closure of cybersecurity action items.</p></li><li><p>Provide technical support for OT cybersecurity incidents, advanced troubleshooting, root-cause analysis, OT recovery and restoration activities.</p></li><li><p>Support OT lifecycle management, system upgrades, obsolescence management, maintenance strategies and long-term cybersecurity improvement plans.</p></li><li><p>Coordinate with Engineering, Projects, Operations, Maintenance, IT, vendors, OEMs, consultants and third-party service providers on OT Cyber Security requirements and implementation.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Desired Candidate Profile:</p><ul><li><p>Bachelor’s Degree in Automation & Control Systems, Industrial Control Systems, Cyber Security, Computer Science Engineering or a related engineering discipline.</p></li><li><p>Minimum 6 years of engineering experience in the Oil & Gas industry, preferably with LNG, offshore/onshore facilities, refinery or petrochemical environments.</p></li><li><p>Strong hands-on understanding of DCS, SIS, SCADA, PLC, ICSS, metering, machinery monitoring/control systems and Instrument Asset Management Systems.</p></li><li><p>Strong knowledge of OT/ICS communication networks and industrial protocols.</p></li><li><p>Hands-on knowledge of OT Cyber Security solutions including Endpoint Protection Platforms (EPP), industrial network and boundary protection, firewalls, OT IDS, SIEM, authentication and access control.</p></li><li><p>Good knowledge of OT Cyber Security standards and frameworks including IEC 62443, ISA, NIST and ISO.</p></li><li><p>Experience in OT Cyber Security engineering, secure-by-design, network segmentation, cybersecurity risk assessment, vulnerability management, incident response and recovery.</p></li><li><p>Experience supporting FAT, SAT, commissioning, design reviews, project execution and system handover.</p></li><li><p>Experience working with OT vendors, OEMs, contractors and engineering consultants.</p></li><li><p>Strong analytical, troubleshooting, problem-solving and stakeholder management skills.</p></li><li><p>Excellent written and spoken English.</p></li></ul><p>Candidates with a combination of strong Oil & Gas control systems/ICSS experience and dedicated OT Cyber Security experience are encouraged to apply.</p>