وظائف مهندس تبريد في قطر

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred). Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>The Luxury Collection Hotels &amp; Resorts, with over 120 properties in more than 35 countries, offers the promise of authentic experiences that evoke lasting, treasured memories. Our more than 100 years of experience, beginning in 1906 under the Italian CIGA brand – a collection of Europe's most celebrated and iconic properties – serves as a solid foundation as we continuously evolve to exceed the desires of the luxury traveler. <br>From legendary palaces and remote retreats to timeless modern classics, each luxury hotel and resort is a unique and cherished expression of its locale – a portal to the destination’s cultural charms and treasures. If you are someone with an appreciation for evocative storytelling, a keen interest and passion for this destination's heritage, and a desire to deliver genuine, personalized, and anticipatory hospitality, then we invite you on our journey.&nbsp;In joining The Luxury Collection, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Job Description<br>Experience: 5+ years, preferably in Qatar Install, maintain, troubleshoot, and repair HVAC systems, including split, package, VRF/VRV, and central air-conditioning systems. Perform preventive and corrective maintenance on HVAC equipment and related components. Diagnose electrical, mechanical, and refrigeration faults and carry out necessary repairs. Handle refrigerant charging, leak detection, vacuuming, and pressure testing. Read and interpret HVAC drawings, manuals, and technical specifications. Ensure all work is completed safely, efficiently, and according to applicable standards. Maintain service records and report equipment issues to the supervisor. Perform emergency breakdown repairs and respond to maintenance requests. Follow company safety procedures and maintain tools and equipment in good condition.

Job Description<br>Experience: 5+ years, preferably in Qatar Install, maintain, troubleshoot, and repair HVAC systems, including split, package, VRF/VRV, and central air-conditioning systems. Perform preventive and corrective maintenance on HVAC equipment and related components. Diagnose electrical, mechanical, and refrigeration faults and carry out necessary repairs. Handle refrigerant charging, leak detection, vacuuming, and pressure testing. Read and interpret HVAC drawings, manuals, and technical specifications. Ensure all work is completed safely, efficiently, and according to applicable standards. Maintain service records and report equipment issues to the supervisor. Perform emergency breakdown repairs and respond to maintenance requests. Follow company safety procedures and maintain tools and equipment in good condition.

Company Description Address Real State is a property management and real estate services company operating in Doha, Qatar. The organization focuses on maintaining comfortable, safe, and efficient residential and commercial properties. Address Real State values reliable building operations and responsive service for tenants and property owners. The company supports skilled technical staff with clear processes and modern tools. Team members are encouraged to contribute to well-maintained facilities and consistent service quality. Role Description This is a full-time, on-site Heating Air Conditioning Technician role based in Doha, Qatar. The technician will install, inspect, and maintain heating, ventilation, and air conditioning (HVAC) systems in residential and commercial properties. Daily tasks include diagnosing system issues, performing repairs, conducting preventive maintenance, and ensuring equipment operates safely and efficiently. The role involves coordinating with property management, documenting work performed, and following safety and regulatory standards. The technician will respond to service requests, support plumbing and minor electrical work related to HVAC systems, and help optimize energy usage across the facilities. Qualifications Strong troubleshooting skills for HVAC systems and related equipment. Knowledge of plumbing tasks that support HVAC installation and maintenance. Experience with preventive maintenance programs for heating and air conditioning systems. Understanding of electricity and safe electrical practices in HVAC work. Relevant EPA or equivalent environmental and safety compliance knowledge. Previous experience as an HVAC technician or in a similar building services role. Ability to read technical manuals, system diagrams, and follow standard operating procedures. Good communication skills and ability to work collaboratively with property staff and tenants. Physical ability to perform on-site work, including lifting equipment and accessing confined spaces. Technical diploma, trade certification, or equivalent training in HVAC, mechanical, or electrical fields is preferred.

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

<ol><li><p>Perform preventive and corrective maintenance of cold room refrigeration systems.</p></li><li><p>Diagnose and troubleshoot faults in cold rooms, freezer rooms and chiller rooms.</p></li><li><p>Coordinate with clients, consultants, suppliers and manufacturers.</p></li><li><p>Manage procurement and material sourcing activities.</p></li><li><p>Supervise installation, testing and commissioning works.</p></li><li><p>Monitor project progress and ensure timely completion.</p></li><li><p>Troubleshoot technical issues and provide engineering solutions.</p></li><li><p>Prepare technical reports, submittals and project documentation.</p></li><li><p>Ensure compliance with industry standards and safety regulations.</p></li><li><p>Support project execution from planning through successful handover.</p><br></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>Cold Room Maintenance experience is mandatory.</strong></p><p><br></p></li><li><p><strong>Skills & Knowledge</strong></p><ul><li><p>Good knowledge of HVAC systems including chillers, VRF, split and package units.</p></li><li><p>Strong understanding of refrigeration systems and cold storage.</p></li><li><p>Ability to read and understand HVAC technical drawings and schematics.</p></li><li><p>Knowledge of load calculation and basic system design.</p></li><li><p>Experience in BOQ preparation and cost estimation.</p></li><li><p>Familiarity with AutoCAD and basic HVAC design tools.</p></li><li><p>Knowledge of testing, commissioning and troubleshooting.</p></li><li><p>Understanding of Qatar safety standards and regulations.</p></li><li><p>Good English communication skills.</p></li><li><p>Strong teamwork and problem-solving abilities.</p><p><strong>Benefits :</strong></p><ul><li><p>Free accommodation</p></li><li><p>Free transportation</p></li><li><p>Career growth opportunities</p></li><li><p>Professional working environment</p></li></ul></li></ul></li></ol>

Job Summary Serve as the HVAC engineer for international projects. Responsibilities include but are not limited to: HVAC design calculations, overall planning, technical management, document design, checking, and review, as well as procurement technical support (such as tender document preparation, bid evaluation, clarifications, drawing review, FAT, etc.）Principal Responsibilities Coordinate with international clients to address project-related issues and inquiries raised by the client. Perform other related tasks as assigned by the client. Education/Experience Requirements/ Certification Bachelor degree or above;Over 15 years of design experience for offshore fixed platforms or floating oil and gas production facilities, with at least 5 international projects where the candidate served as the HVAC discipline lead. Proficient in offshore engineering HVAC专业知识, international standards and specifications (including but not limited to ASHRAE, SMACNA, ISO, API, SHELL DEP, Saudi Arabia, Qatar, etc.), and industry regulations and policies. Preference will be given to candidates with project experience in the Middle East or Brazil. Behavioral/Technical Skills: Skilled in using office software such as Excel, Word, and PPT, and familiar with HVAC design software like CARRIER E20II or TRANE. Diligent, meticulous, responsible, and hardworking. Willing to work overtime as needed based on project requirements. Strong learning ability with the initiative to acquire new skills and knowledge. Proficient in English listening, speaking, reading, and writing to meet job requirements. Domestic candidates should have a CET-6 score of 550 or above or a TOEIC score of 700 or above. Native English speakers are preferred for international candidates.

<p>Strong experience in troubleshooting chiller control systems and mechanical components, experience with centrifugal screw scroll and reciprocating chillers.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification ITI/ Diploma in mechanical engineering with 7 years food allowance accommodation provided by the company Transportation Provided by the company</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Principal: Qatar District Cooling Company</p><p>Country: Doha, Qatar</p><p>Qualifications: Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</li><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li><li>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</li><li>Supervise, guide and monitor work done by external vendors.</li><li>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</li><li>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</li><li>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</li><li>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</li><li>Work effectively with other team members, including engineers, supervisors, and external vendors.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li><li>Where applicable, provide assistance and support to other team members, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li><li>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>