وظائف رائد نشاط في قطر 2026 | احدث الوظائف من تنقيب

Naukri Gulf

مشرف

في الموقع - قطر - Qatar ٢٥ يونيو ٢٠٢٦

الهندسة

<section>الوصف الوظيفيالأدوار والمسؤوليات<div class="paragraph">سيكون مشرف الزجاجات وخلية الأكسجين في خلفية ميكانيكية متمرس ومهاري، يقوم بمجموعة من أنشطة الصيانة التفصيلية في الزجاجات والخلية الأكسجين بالطائرة، سيكون مسؤولاً عن الحفاظ على صلاحية الطائرة من خلال تفويض المهام والتفويض المناسب في أنشطة الزجاجات والأكسجين بالطائرة. سيكون مسؤولاً عن تخصيص العمل والإشراف على إدارة الأفراد. مسؤول عن تحقيق أهداف التسليم المتفق عليها على المستوى التكتيكي. إظهار مهارات إدارة الأشخاص والقيادة. سيكون حامل المنصب قادرًا على إظهار الوعي بالاعتماديات الخارجية الأوسع وتحديد المجالات للتحسين المستمر. النشاط الأساسي: إجراء فحص صيانة تفصيلية وأنشطة إشراف على مكونات زجاجات الأكسجين بالطائرة؛ الإشراف على الفريق لضمان إجراء الصيانة وفق الجدول الزمني وتسليط الضوء على أي مشكلات، وتصعيدها عند الحاجة. الإبلاغ عن أي أثر على البرنامج الأوسع. ضمان كفاءة الموظفين وموافقتهم للوائح الصيانة الموكلة إليهم. الحفاظ على تفويض المهام الشخصية والفرق للعمل على طائرة أو مكونات وفقًا لمتطلبات AMC. المسؤول عن تحقيق أهداف التسليم المتفق عليها على المدى القصير إلى المتوسط من خلال إشراف الآخرين. تقارير التقدم مقابل أهداف التسليم للإدارة. تقديم الإرشاد والقيادة للفريق. تطوير أعضاء الفريق باستخدام عمليات التقييم الرسمية، مثل تقارير الأداء، ودعم طلبات التدريب بما في ذلك التدريب أثناء العمل. يظهر مهارات تواصل رائعة وفعّالة في إدارة الأشخاص لنقل معلومات معقدة. القدرة على تحديد نطاق وإجراء فحوصات مستقلة ومهمة. الحفاظ على سجل شخصي لإظهار التوافر والحداثة، عند إكمال أنشطة التدريب أثناء العمل، توقيع دفاتر السجل الخاصة بالموظفين الآخرين وفقاً لحدود تخصصك ومهاراتك. إذا كنت مقيداً كمقيم معتمد، قم بالموافقة على التفويض والكفاءات، وتحقق من حزم طلب رخصة Pt 145 قبل التقديم. إجراء وإكمال أنشطة الصيانة والتشخيص الموكلة على مكونات Typhoon الخاصة بالزجاجات والأكسجين، والتي قد تشمل، حسب الاقتضاء، الفحص، الإصلاحات، التعديلات، إصلاح الأعطال، البدائل. إظهار موقف مرن ومبادر في تنفيذ المسؤوليات الملائمة للدور واتخاذ الاتجاه المناسب. تقارير التقدم مقابل أهداف التسليم للمشرف. إجراء مهام دعم ضمن قسم الزجاجات والأكسجين اللازمة للحفاظ على الالتزام بإجراءات MOE وQAF (مثل فحص الإشراف، التحكم في الأدوات/معدات الاختبار). إجراء تقييم العطل ورفع بطاقات عمل آلية للأعطال المكتشفة أثناء الصيانة. التأكد من توثيق جميع أنشطة الصيانة والحفاظ على سجلات صلاحية الطيران في الأنظمة ذات الصلة (نظام معلوماتي/ورقي). تجميع التقارير المطلوبة، تحديد أي مشاكل وتصعيدها حسب الحاجة. المسؤوليات الأساسية: مؤشرات الأداء إدارة الأنشطة التنظيمية بفعالية من خلال وضع أهداف التسليم، ومراقبة التقدم، وتطوير برامج تحسين الأداء. إعطاء الأولوية للأنشطة ضمن الفرق/عبر الفرق لتعظيم الكفاءة. المسؤول عن تقييم القضايا المتصاعدة لأي تأثير على صلاحية الطيران المستمرة وتوليد حل فعال، أو رعاية التصعيد للإدارة، حسب الاقتضاء. الإجراءات/المعايير الالتزام بإطار التنظيمي، وإجراءاته ومعاييره واللوائح الأخرى للشركة إن وجدت. تحديد واقتراح التغييرات حسب الحاجة. إكمال الأنشطة: التأكد من توثيق جميع أنشطة Part 145 والحفاظ على سجلات صلاحية الطيران في الأنظمة ذات الصلة (نظام معلوماتي/ورقي). التأكد من أن الأفراد المؤهلين وذوي الخبرة والمخولين يؤدون جميع أنشطة Part 145. ضمان دمج نشاط Part 145 ضمن الأعمال، بما في ذلك إشراك الجهات المعنية في جميع مراحل العملية. توفير الدعم والإرشاد للفريق. نظام إدارة السلامة تعزيز تطبيق العوامل البشرية، إدارة الأخطاء، إدارة المخاطر وضمان السلامة ضمن فريق Part 145، مع التحليل الاستباقي والتخفيف وإدارة Hazards. ضمان أن أنشطة الصيانة تتوافق مع إطار حوكمة وضمان QAF، بما في ذلك دعم عمليات التأكيد والتدقيق المستقل. دعم الاستجابة لنتائج التدقيق بشكل فوري ومناسب وتقديم معلومات لدعم المراجعات ذات الصلة. دعم تنفيذ التحسينات المحددة للتغلب على أي عدم امتثال ومراقبة فعاليتها. المتطلبات التنظيمية/التشريعية والتشريعات القدرة على إظهار فهم وتطبيق مناسب لإطار تنظيم الصيانة المستمرة. دعم تنفيذ أي تغييرات تنظيمية في أنشطة الصيانة. الالتزام بجميع المتطلبات الأخرى، مثل ITAR، EaPW، ISO. المتطلبات التعاقدية/المعرفة الوظيفية: إتمام تدريب هندسي مهني، ويفضل في الهندسة الجوية أو التدريب العسكري المعادل/المؤهلات. المؤهل الأكاديمي لهذا الدور الحد الأدنى City & Guilds 2675 أو 2661 في الهندسة الجوية والصيانة أو ما يعادلها. قائد متمرس وكفء في هذا المستوى. يشترط خبرة لا تقل عن سنتين في مستوى فني قبل تولي دور المشرف. إظهار تنوع الخبرة، والحداثة، والتحديث عبر دفتر سجل يسجل المهارات والمعرفة والسلطات للعمل على نوع الطائرة أو في الحصص. خبرة عملية وخبرة في تطبيق معايير السلامة الجوية وممارسات التشغيل الآمنة. تقنيات تعليم أثناء العمل والتدريب. يتطلب معرفة عامة ومتعمقة بالمنتج ضمن مجال تخصصه. الوعي بكيفية تداخل الفريق مع الآخرين لتحقيق الأهداف العامة للمجال وفهم متطلبات التحسين المستمر وتطبيقه. دور Typhoon في الميكانيكا Q الدورة أو ما يعادلها. الالتزام الشخصي بتقييمات المخاطر وسياسات وإجراءات الصحة والسلامة والبيئة. العوامل البشرية - مواصفات الدورة القياسية E&PW. الوعي ITAR - مواصفات الدورة القياسية. معرفة IT. رخصة قيادة المملكة المتحدة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The Transparencies & Oxygen Bay Supervisor will be an experienced and skilled mechanical supervisor, undertaking a range of detailed maintenance activities in the aircraft transparencies & oxygen bay, he will be responsible for maintaining airworthiness through appropriate task delegation and authorisation on the aircraft transparencies & oxygen bay activities. He will be responsible for tasking of work & supervision of personnel/people management. Responsible for meeting agreed delivery targets at a tactical level. Demonstrating people management and leadership skills. The post holder will be able to demonstrate awareness of broader external dependencies and identify areas for continuous improvement. Core Activity: Undertaking detailed maintenance inspection and supervision activities on the aircraft transparencies & oxygen bay components Supervising team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme Ensuring staff are sufficiently competent and approved for the maintenance tasks allocated to them Maintain personal & teams task authorisation for working on an aircraft or components in accordance with AMC requirements Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management Provides guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR s, supports and sponsors training requests including on the job training . Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information Ability to scope and carry out independent and vital inspections Maintaining personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel s Log Books as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission Undertaking and complete tasked maintenance & diagnostic activities on the Typhoon s Transparencies & Oxygen components, which may include, as appropriate, inspections, repairs, modifications, fault rectifications, replacements Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately Progress reporting against delivery targets to supervisor Undertaking support tasks within the Transparencies & Oxygen bay which are required to maintain compliance with the MOE and QAF procedures (e.g. oversight checks, control of tooling/test equipment) Undertaking fault evaluation and raise ad hoc work cards for found faults during maintenance Ensuring all maintenance activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Compile required reporting, identify any issues and escalate as appropriate Key Accountabilities: Performance indicators Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate Procedure/standards Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required Completion of activities Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure suitably qualified, experienced and authorised personnel perform all Part 145 activities. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team Safety Management System Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards Management System Assurance Ensure maintenance activities are compliant with the QAF governance and assurance framework, including supporting process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness Statutory/Regulatory & Legislative requirements Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO Contractual Requirements Comply with all applicable contractual requirements Requirements Qualifications/Functional Knowledge: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency & recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices On the Job Training Instructional Techniques Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application Typhoon Mechanical Trade Q Course or equivalent. Ensure personal compliance with the risk assessments, SHE policies and procedures Human Factors- Standard Course Specification E&PW Awareness- Standard Course Specification ITAR Awareness- Standard Course Specification IT Literate UK Driving licence</div></section><section>Desired Candidate ProfileCompletion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency & recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices On the Job Training Instructional Techniques Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application Typhoon Mechanical Trade Q Course or equivalent. Ensure personal compliance with the risk assessments, SHE policies and procedures Human Factors- Standard Course Specification E&PW Awareness- Standard Course Specification ITAR Awareness- Standard Course Specification IT Literate UK Driving licence</section>

بيت.كوم

مشرف/ة الترفيه

في الموقع - قطر ١ يوليو ٢٠٢٦

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> ملخص المنصب إنشاء جداول أنشطة ترفيهية وإعلانات باستخدام برامج النشر. إجراء جرد للوازم المواد والمعدات وإبلاغ المسؤول عن انخفاض الإمدادات. تشجيع وتجنيد وتسجيل وجدولة الضيوف للمشاركة في الأنشطة الترفيهية. تعزيز أجواء ممتعة ومريحة للضيوف. تزويد الضيوف بمعلومات عن مرافق وأنشطة الترفيه المتاحة. الترويج لقواعد وأنظمة منشأة الترفيه بما يهدف إلى سلامة ورفاه الضيوف وأعضاؤه. رصد النشاط في منشأة الترفيه والرد بشكل مناسب وفق إجراء التشغيل المحلي في حالة الطوارئ. الوعي بالإمكانيات التي قد تمنع الضيوف من المشاركة الآمنة في نشاط ما وإبلاغ المشرف/المدير. تقديم المساعدة للضيوف المصابين حتى وصول خدمات الطوارئ الطبية. تنظيف وصيانة معدات ولوازم الترفيه. المساعدة في تدريب الإدارة وتحفيز وتوجيه الموظفين؛ والعمل كنموذج يحتذى به. الإبلاغ عن الحوادث والإصابات وظروف العمل غير الآمنة إلى المدير؛ إكمال التدريب والتصاريح الأمنية. الالتزام بسياسات وإجراءات الشركة؛ التأكد من أن الزي والمظهر الشخصي نظيفان واحترافيان؛ الحفاظ على سرية المعلومات الملكية؛ حماية أصول الشركة. توقع وتلبية احتياجات خدمة الضيوف؛ مساعدة الأفراد ذوي الإعاقة. التحدث مع الآخرين باستخدام لغة واضحة ومهنية؛ الرد على الهواتف باستخدام آداب المهنة المناسبة. تطوير والحفاظ على علاقات عمل إيجابية مع الآخرين. معالجة الطلبات أو المعاملات من العملاء وجمع المدفوعات حسب الضرورة. ضمان الالتزام بتوقعات الجودة والمعايير؛ تحديد وتوصية وتنفيذ طرق جديدة لرفع جودة المنظمة. قراءة والتحقق بصريًا من المعلومات في مجموعة متنوعة من التنسيقات (مثلاً النص الصغير). فحص الأدوات والمعدات أو الآلات بشكل بصري (مثلاً لتحديد العيوب). إدخال وتحديد معلومات العمل باستخدام الحواسيب و/أو أنظمة نقاط البيع. الوقوف أو الجلوس أو المشي لمدد طويلة أو طوال نوبة العمل. التحريك والرفع والنقل والدفع والسحب ووضع الأشياء التي تزن ما يعادل 25 رطلاً أو أقل بدون مساعدة والأشياء التي تزن أكثر من 50 رطلاً بمساعدة. الإمساك بالقطع وتدويرها والتلاعب بأحجام وأوزان مختلفة، ما يتطلب مهارات حركية دقيقة وتنسيق اليد-العين. التنقل عبر مساحات ضيقة أو محصورة أو مرتفعة. التنقل فوق أسطح مائلة وغير مستوية أو زلقة بالإضافة إلى صعودًا ونزولًا السلالم و/أو منحدرات الخدمة. الوصول إلى فوق الرأس وتحت الركبتين، بما في ذلك الانحناء والالتواء والسحب والانحناء. أداء واجبات وظيفية أخرى معقولة حسب الطلب. المؤهلات المفضلة التعليم: شهادة الثانوية العامة أو ما يعادلها.G.E.D. الخبرة العملية ذات الصلة: خبرة عملية لا تقل عن عام واحد في المجال ذي الصلة. الخبرة الإشرافية: ما لا يقل عن عام واحد من الخبرة الإشرافية. المؤهلات المطلوبة الترخيص أو الشهادة: شهادة CPR شهادة الإسعاف الأولي معدات الترفيه واللياقة البدنية أي شهادة أو تدريب مطلوب من الجهات المحلية والولاية. في Marriott International، نلتزم بأن نكون صاحب عمل يوفر فرص متكافئة للجميع، ونرحب بالجميع ونوفر لهم فرصاً. نحن نشجع بيئة تُقدر وتحتفي بالخلفيات الفريدة لزملائنا. أقوى ما لدينا هو مزيج الثقافة والمواهب والتجارب. نحن ملتزمون بعدم التمييز على أي أساس محمي، بما في ذلك الإعاقة أو وضع المحاربين القدامى أو غيره من الأسس المحمية بموجب القانون المعمول به. عندما تنضم إلى عائلة شيراتون، تصبح عضوًا في مجتمعها العالمي. لقد كنا مكانًا للجمع والتواصل منذ 1937. في شيراتون، يخلق الزملاء شعورًا بالانتماء في أكثر من 400 مجتمع حول العالم. ندعو، ونرحب، ونربط الضيوف من خلال تجارب ممتعة وخدمة مدروسة. إذا كنت لاعب فريق ومتحمس لتقديم تجربة ضيف ذات معنى، فنحن نشجعك على استكشاف فرصة مسيرتك القادمة مع شيراتون. انضم إلينا في مهمتنا أن تكون „مكان تجمع العالم“. عند انضمامك إلى Sheraton Hotels & Resorts، ستنضم إلى مجموعة من العلامات التجارية مع Marriott International. كن في المكان الذي يمكنك فيه أداء أفضل عملك، ابدأ هدفك، انتمي إلى فريق عالمي رائع، وكن أفضل نسخة من نفسك. </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> POSITION SUMMARY Create recreational activity agendas and advertisements using publishing software. Conduct inventory of supplies, materials, and equipment and inform manager of low supply items. Encourage, recruit, register, and schedule guests to participate in recreation activities. Promote a fun and relaxing atmosphere for guests. Provide information to guests about available recreation facilities and activities. Promote the rules and regulations of the recreation facility intended for the safety and welfare of guests and members. Observe activity in the recreational facility and respond appropriately in accordance with local operating procedure in the event of an emergency. Be aware of possible situations where guests are not able to safely participate in an activity and inform supervisor/manager. Provide assistance to injured guests until the arrival of emergency medical services. Clean and maintain recreational equipment and supplies. Assist management in training, motivating, and coaching employees; serve as a role model. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow company policies and procedures; ensure uniform and personal appearance is clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs; assist individuals with disabilities. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others. Process orders or transactions from customers and collect payment as necessary. Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and objects weighing in excess of 50 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. REQUIRED QUALIFICATIONS License or Certification: CPR Certification First Aid Certification Recreation and Fitness Equipment Any certification or training required by local and state agencies. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. </div>

بيت.كوم

مشرف ورشة

في الموقع - قطر ٢٨ يوليو ٢٠٢٦

الطيران والملاحة

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> معلومات عامة التنظيم حول SPIE Global Services Energy باعتبارها فرعًا دوليًا لمجموعة SPIE موجودة في نحو 30 دولة في أوروبا وإفريقيا وآسيا والمحيط الهادئ والشرق الأوسط والأمريكيتين، تعمل SPIE Global Services Energy عبر سلسلة قيمة البنية التحتية لإنتاج الطاقة من التصميم حتى الصيانة. تعتمد SPIE Global Services Energy على شبكة محلية واسعة لنشر الموارد بسرعة وتلبية احتياجات عملائها في أنسب الظروف الممكنة آمنًا. اعتمادًا على خبرة 5,000 موظف لديها، تساعد SPIE Global Services Energy اللاعبين في صناعات النفط والغاز والطاقة المتجددة على تحسين الأداء الفني للبنية التحتية لديهم، وزيادة كفاءتهم في استهلاك الطاقة وتقليل بصمتهم الكربونية. مع 55,000 موظف وحضور محلي قوي، حققت مجموعة SPIE في عام 2025 إيرادات مجمعة تبلغ 10.4 مليار يورو وEBITA مجمّع 793 مليون يورو.   المرجع 2026-44220   نشاط المنطقة الخدمات الميكانيكية، وتكييف الهواء والكهرباء وصف المنصب عنوان الوظيفة مشرف ورشة م/ف نوع العقد عقد بنهاية محدودة ساعات العقد دوام كامل مدة العقد 5 سنوات وصف الوظيفة لدينا حاليًا فرصة داخل SPIE Global Services Energy – الدوحة       مشرف ورشة يجب أن يكون مشرف الورشة شخصًا عالي الكفاءة، ملمًا بجميع جوانب خدمات الورش، مع خبرة كافية (لا تقل عن 10 سنوات). في التخطيط والتنفيذ الفعال لبرنامج الصيانة الوقائية للمعدات العاملة بالوقود الديزل المتنقلة/الثابتة ولإصلاح أنظمة الهيدروليك للمتابعة مع المركبات الثقيلة والمعدات المحمولة. الواجبات والمسؤوليات <ul><li>تنسيق/ تنظيم ومراقبة صيانة روتينية ووقائية للمركبات/المعدات في المصنع لصيانة المعدات الثقيلة مثل مولدات الديزل، مضخات المياه المقاومة للحرائق، ضواغط الهواء، الرافعات المتحركة، الشاحنات، الرافعات البشرية، معدات مكافحة الحريق، ومعدات رفع أخرى، إلخ…</li><li>توفير أنشطة جدولية وتعيين فنيين لتنفيذ برامج الصيانة الدورية وفق أمر العمل PM/ وفحصات أو/ ونفاذ أعمال الأعطال وكذلك الأعمال الطارئة.</li><li>الإشراف على استبدال قطع الغيار باستخدام الأدوات المناسبة ومواصفات الشركات المصنعة.</li><li>تشخيص العيوب الكهربائية والإلكترونية في الآلات وتصحيح العيوب.</li><li>التحكم/ فهم أعمال إعادة التصنيع لمختلف أنواع مضخات الهيدروليك مثل مضخات التروس، مضخات تدفق متغير، إلخ…</li></ul> الملف الشخصي المؤهلات التعليمية: <ul><li>الهندسة الميكانيكية وهندسة السيارات</li><li>دبلوم في الهندسة الميكانيكية/الهندسة السيارات                                                  الخبرة العملية ذات الصلة:</li><li>خبرة لا تقل عن 10 سنوات في مجال المعدات الثقيلة</li><li>أنشطة الصيانة من هذا الحد الأدنى لمدة 5 سنوات في صناعات النفط والغاز أو البتروكيماويات.</li><li>معرفة تقنية ممتازة في الهيدروليك والهواء المضغوط</li><li>المألوف بعمليات وصيانة معدات مكافحة الحريق/المركبات.</li><li>خلفية تقنية، ويفضل في الهندسة الميكانيكية وهندسة السيارات</li><li>معرفة بالصناعة ومصنعيها وعملائها ومتطلباتهم</li></ul> العمل في SPIE ما الذي يمكن أن نقدمه لك؟ نحن نقدم عقدًا طويل الأجل مع معدل يومي جذاب، تغطية تأمينية، ونقل وإسكان للوافدين بمواصفات موظفي الشركات موقع العمل الموقع راس لفان معايير المرشح الحد الأدنى من الخبرة المطلوبة 10 سنوات أو أكثر التفويضات المطلوبة NA اللغات الإنجليزية (مستوى احترافي في العمل) طموحنا دمج اختلافاتنا SPIE Global Services Energy ملتزمة بتعزيز التنوع. هذا المنصب مفتوح للأشخاص ذوي الإعاقات. </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information Organisation About SPIE Global Services Energy As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.   Reference 2026-44220   Area activity Mechanical, HVAC and Electrical Services Position description Job title Garage Supervisor M/F Contract type Fixed-term-contract Contractual hours Full time Contract duration 5 years Job description We currently have an opportunity within SPIE Global Services Energy Doha       Garage Supervisor Garage Supervisor should be a very capable person, well versed in all aspects of Garage SERVICES, with having adequate experience (minimum 10 years). In efficiently planning and executing the preventive maintenance program of Mobile / Static diesel driven equipment and repair to hydraulic systems for various heavy lifting vehicles and portable equipment. Duties and Responsibilities <ul><li>Co-ordinate/ Organize and monitor routine and preventive maintenance of vehicles/equipment at plant for Maintenance of Heavy Equipment like Diesel Generator, Fire Water pumps ,Air compressors, Mobile cranes, Trucks, man lifts, firefighting equipment, other lifting equipment’s etc…</li><li>Provide schedule activities and assign technicians to perform Periodical Maintenance programs as per PM WORK ORDER / and inspections or/ and attend breakdown jobs as well as emergency jobs.</li><li>Supervision of spare parts replacements by using proper tools and manufactures specifications.</li><li>Diagnose the electrical and electronic defect in the machines and rectified the defects.</li><li>Control/ understand the overhauling jobs of various types of hydraulic pumps like, gear pumps, variable flow piston pumps etc...</li></ul> Profile Educational Qualifications: <ul><li>Mechanical Engineering & Automobile Engineering</li><li>Diploma in Mechanical/ Automobile Engineering                                                Relevant Work Experience:</li><li>Minimum 10 years’ experience in the field of Heavy Equipment</li><li>Maintenance activities out of this minimum 5 years in Oil &Gas or petrochemical industries.</li><li>Excellent technical knowledge in hydraulics and pneumatics</li><li>Familiar with the Firefighting Equipment/vehicles operation and maintenance.</li><li>Technical background, preferably in Mechanical Engineering & Automobile Engineering</li><li>Knowledge of the industry, its manufacturers, its customers, and their requirements</li></ul> Working at SPIE What can we offer you? We offer long-term contract with attractive daily rate, insurance coverage, transportation & expat standard accommodation Position location Location RAS LAFFAN Candidate criteria Minimum level of experience required 10 years or more Required authorisations NA Languages English (C-Professional working proficiency) Our ambition Combining our differences SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities. </div>

بيت.كوم

مشرف الترفيه

في الموقع - قطر ١١ يوليو ٢٠٢٦

الإنشاءات والعقارات

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> ملخص المنصب إنشاء جداول أنشطة ترفيهية وإعلانات باستخدام برامج النشر. إجراء جرد للإمدادات والمواد والمعدات وإبلاغ المدير بالعناصر التي نفدت المخزون. تشجيع، توظيف، تسجيل وجدولة الضيوف للمشاركة في أنشطة الترفيه. ترويج جو ممتع ومريح للضيوف. تقديم معلومات للضيوف حول مرافق وأنشطة الترفيه المتاحة. تعزيز قواعد ولوائح المرفق الترفيهي والتي تهدف إلى سلامة ورفاهية الضيوف والأعضاء. ملاحظة الأنشطة في المرفق الترفيهي والاستجابة بشكل مناسب وفقًا لإجراءات التشغيل المحلية في حالة الطوارئ. يجب أن تكون على دراية بالوضعيات المحتملة التي لا يستطيع فيها الضيوف المشاركة في نشاط بشكل آمن وإبلاغ المشرف/المدير. تقديم المساعدة للضيوف المصابين حتى وصول خدمات الطوارئ الطبية. تنظيف وصيانة معدات وإمدادات الترفيه. المساعدة في تدريب الإدارة وتحفيز وتوجيه الموظفين؛ العمل كنموذج يحتذى به. الإبلاغ عن الحوادث والإصابات وظروف العمل غير الآمنة إلى المدير؛ إكمال التدريب والسلامة والشهادات. اتباع سياسات وإجراءات الشركة؛ ضمان أن المظهر والزي والملابس نظيفة ومهنية؛ الحفاظ على سرية المعلومات الملكية؛ حماية أصول الشركة. توقّع وتلبية احتياجات خدمة الضيوف؛ مساعدة الأفراد ذوي الإعاقة. التحدث مع الآخرين بلغة واضحة ومهنية؛ الرد على الهواتف بالآداب المناسبة. تطوير والحفاظ على علاقات عمل إيجابية مع الآخرين. معالجة الطلبات أو المعاملات من العملاء وجمع الدفع حسب الضرورة. ضمان الالتزام بتوقعات الجودة والمعايير؛ تحديد وتوصية وتنفيذ طرق جديدة لرفع جودة المنظمة. قراءة وتحقق بصريًا من المعلومات بصيغ مختلفة (مثل النص الصغير). فحص الأدوات والمعدات والآلات بصريًا (للكشف عن العيوب). إدخال وتحديد معلومات العمل باستخدام أجهزة الكمبيوتر ونظم نقاط البيع. الوقوف أو الجلوس أو المشي لفترة طويلة أو لدوام عمل كامل. تحريك ورفع وحمل ودفع وسحب ووضع أشياء تزن أقل من أو تساوي 25 رطلاً دون مساعدة وأشياء تزن أكثر من 50 رطلاً بمساعدة. الإمساك والتدوير والتلاعب بالأشياء بحجم ووزن مختلفين، مما يحتاج إلى مهارات حركية دقيقة وتنسيق يد وعين. التنقل عبر أماكن ضيقة أو محصورة أو مرتفعة. الانتقال عبر أسطح منحدرة وغير مستوية وزَلِقة وكذلك صعودًا ونزولًا على الدرج وممرات الخدمة. الوصول فوق الرأس وتحت الركبتين، بما في ذلك الانثناء والالتواء والسحب والانحناء. أداء واجبات وظيفية معقولة أخرى حسب الطلب. المؤهلات المفضلة التعليم: شهادة الثانوية العامة أو ما يعادلها. الخبرة العملية المتعلقة: خبرة عملية لا تقل عن سنة واحدة ذات صلة. الخبرة الإدارية: خبرة إشرافية لا تقل عن سنة واحدة. المؤهلات المطلوبة رخصة أو شهادة: شهادة CPR شهادة الإسعاف الأولي معدات الترفيه واللياقة البدنية أي شهادة أو تدريب مطلوب من قبل الوكالات المحلية والولاية. في ماريوت الدولية، نلتزم بأن نكون صاحب عمل يوفر فرصاً متكافئة للجميع، ونرحب بالجميع ونوفر الوصول إلى الفرص. نحن نعزز بيئة يقدَّر فيها الخلفيات الفريدة لموظفينا ونحتفي بها. قوتنا الكبرى تكمن في المزيج الغني من الثقافة والمواهب والخبرات لموظفينا. نلتزم بعدم التمييز على أي أساس محمي، بما في ذلك الإعاقة، حالة المحاربين القدامى، أو أي أساس آخر يحميه القانون المعمول به. مزج السحر الكلاسيكي مع روح الريادة، تلتزم فنادق ومنتجعات سانت ريجيس بتقديم تجارب رائعة في أكثر من 50 فندقًا ومنتجعًا فخمًا في أفضل العناوين حول العالم. بدءًا من عرض فندق سانت ريجيس في نيويورك على يد جون جاك اسطور الرابع في مطلع القرن العشرين، ظلت العلامة التجارية متمسكة بمستوى غير قابل للمساومة من الخدمة المصممة خصيصًا والمتوقع توقعها لجميع ضيوفها، يقدمها فريق من المضيفين الكرام الذين يجمعون بين الرقي الكلاسيكي والذوق الحديث، بالإضافة إلى خدمتنا المميزة Butler Service. ندعوك لاستكشاف مسارات العمل في سانت ريجيس. بانضمامك إلى سانت ريجيس، أنت تنتمي إلى محفظة العلامات التجارية لشركة ماريوت الدولية. كن حيث يمكنك أداء أفضل عمل لديك، ابدأ غايتك، انتمي إلى فريق عالمي رائع، وكن أفضل نسخة من نفسك. </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> POSITION SUMMARY Create recreational activity agendas and advertisements using publishing software. Conduct inventory of supplies, materials, and equipment and inform manager of low supply items. Encourage, recruit, register, and schedule guests to participate in recreation activities. Promote a fun and relaxing atmosphere for guests. Provide information to guests about available recreation facilities and activities. Promote the rules and regulations of the recreation facility intended for the safety and welfare of guests and members. Observe activity in the recreational facility and respond appropriately in accordance with local operating procedure in the event of an emergency. Be aware of possible situations where guests are not able to safely participate in an activity and inform supervisor/manager. Provide assistance to injured guests until the arrival of emergency medical services. Clean and maintain recreational equipment and supplies. Assist management in training, motivating, and coaching employees; serve as a role model. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow company policies and procedures; ensure uniform and personal appearance is clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs; assist individuals with disabilities. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others. Process orders or transactions from customers and collect payment as necessary. Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and objects weighing in excess of 50 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. REQUIRED QUALIFICATIONS License or Certification: CPR Certification First Aid Certification Recreation and Fitness Equipment Any certification or training required by local and state agencies. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. </div>

بيت.كوم

Construction Supervisor (Piping)

في الموقع - قطر ٨ يونيو ٢٠٢٦

الطب والرعاية الصحية

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> * Acts as a safety leader, ensuring EPIC Contractor's work in compliance to Company Life Saving Rules and all safety and environmental regulations of Company and the State of Qatar.* Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement. * Assist functional supervisor in review and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs.* Supervise all EPIC contractors piping (Process and Utility piping system with various material pipe classes for above ground & underground piped services) installation activities are based on approved engineering documentation and project schedule during the execution of construction activities. * Attend Requests For Inspections (RFIs) as per approved ITPs, including Material Receiving Inspections in coordination with Reconstruction Supervisor, and sign off relevant inspection and test reports / RFIs.* Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification. * Lead the EPIC construction contractor(s) on all mechanical aspects of the piping works.* Supervise with EPIC contractor during execution of the piping installation, line check, punch clearing, hydrotest and re-instatement at site. * Manage and lead final mechanical completion inspections and punch closing.* Supervise the Pre-Com activities to ensure safety and the quality of the completed work. * Undertake technical integrity and HSE reviews/audits* Participate in process safety management * Participate in PSSR and provide support to Operations pre & start up activity where instructed.* Co-ordinate mobilization of contractors on site. * Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.* Good knowledge in reading and understanding P&ID, GA, ISOs, piping standard drawings (incl support drawings) and Equipment Layout drawings. * Maintain a daily record of progress (daily diary) noting special comments.* Reports to Sr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. * Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits.* Participate in development of as-built drawings/documentation. * Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site.* Liaise and report with the QA/QC Inspector on quality related matters. <ul> <li>Bachelor's Degree or Diploma in Mechanical Engineering from an internationally recognized University.</li> <li>Preferably having formal training in QA/QC functional aspects.</li> <li>Candidate shall be a safety leader.</li> <li>Candidate should have a minimum of 10 years overall experience in piping erection (UG & AG), pressure testing, mechanical completion and construction of oil and gas facilities.</li> <li>Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred.</li> <li>Current experience in State of Qatar industrial cities and/or other GCC countries is required.</li> <li>Piping inspection and rotating equipment experience is an advantage, and inspection coordination experience in the.</li> <li>The candidate shall have specific stated experiences in; <ul> <li>Greenfield/new build construction sites,</li> <li>Brownfield/live process plants,</li> <li>Permits to work, incl Isolation & Lock Out/Tag Out of live services,</li> <li>Tie-in to live facilities, including testing and integration to existing systems,</li> <li>Extensive knowledge in Lifting Plan and Crane Studies. If candidate have Approved Lifting Supervisor Certificate it would be advantage.</li> <li>Stage Inspection and Testing of Construction activities as per approved ITPs</li> </ul> </li> </ul> <ul> <li>Salary:<ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li>Work Schedule:<ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li>Duration: <ul> <li>2 years, renewable</li> </ul> </li> <li>Location: <ul> <li>Qatar</li> </ul> </li> </ul> </div>

متعاقد

Construction Supervisor (Piping)

في الموقع - قطر - الدوحة ١٧ يونيو ٢٠٢٦

الموارد البشرية

Vacancy Overview Construction Supervisor (Piping) Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry. Airswift is seeking for Construction Supervisor (Piping) to work in Qatar with a major Oil & Gas Company. Qualifications Bachelor’s Degree or Diploma in Mechanical Engineering from an internationally recognized University. Preferably having formal training in QA/QC functional aspects EXPERIENCE Candidate shall be a safety leader. Candidate should have a minimum of 10 years overall experience in piping erection (UG & AG), pressure testing, mechanical completion and construction of oil and gas facilities. Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred. Current experience in State of Qatar industrial cities and/or other GCC countries is required. Piping inspection and rotating equipment experience is an advantage, and inspection coordination experience in the. Extensive knowledge of international and industry specific piping codes and standards, including ASME, ANSI B31.3 & B31.1, SHELL DEP’s, etc. Piping, Welding / NDT inspector certificates (AWS / ASNT / CSWIP / API) would be an advantage. Extensiveexperience in pipe coating systems and procedures, including painting, galvanizing, wrapping, insulation, etc. BGAS certification would be an advantage. Extensive experience in fabrication pipe spooling, pipe supports and erection of carbon steel, stainless/alloy steel, u PVC and GRE/GRV piping systems, including pressure testing, pre-commissioning and mechanical completion inspection. Excellent written and oral English skills. Able to read piping drawings, P&ID’s and manufacturer’s instructions, etc. The candidate shall have specific stated experiences in;Greenfield/new build construction sites, o Brownfield/live process plants,Permits to work, incl Isolation & Lock Out/Tag Out of live services,Tie-in to live facilities, including testing and integration to existing systems, Extensive knowledge in Lifting Plan and Crane Studies. If candidate have Approved Lifting Supervisor Certificate it would be advantage. Stage Inspection and Testing of Construction activities as per approved ITPs Strong technical, prioritization and management skills. Good communication, influencing and interface skills. Proficient knowledge of computer programs (MSOffice, Outlook, Excel, Words, PDF, Power Point, etc) and engineering software applications relevant to the discipline. Primary Duties And Responsibilities Acts as a safety leader, ensuring EPIC Contractor’s work in compliance to Company Life Saving Rules and all safety and environmental regulations of Company and the State of Qatar. Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement. Assist functional supervisor in review and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs. Supervise all EPIC contractors piping (Process and Utility piping system with various material pipe classes for above ground & underground piped services) installation activities are based on approved the engineering documentation and project schedule during the execution of construction activities Attend Requests For Inspections (RFIs) as per approved ITPs, including Material Receiving Inspections in coordination with Reconstruction Supervisor, and sign off relevant inspection and test reports / RFIs. Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification. Lead the EPIC construction contractor(s) on all mechanical aspects of the piping works. Supervise with EPIC contractor during execution of the piping installation, line check, punch clearing, hydrotest and re-instatement at site. Manage and lead final mechanical completion inspections and punch closing. Supervise the Pre-Com activities to ensure safety and the quality of the completed work. Undertake technical integrity and HSE reviews/audits Participate in process safety management Participate in PSSR and provide support to Operations pre & start up activity where instructed. Co-ordinate mobilization of contractors on site. Carryout daily checks on contractor’s staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications. Good knowledge in reading and understanding P&ID, GA, ISOs, piping standard drawings (incl support drawings) and Equipment Layout drawings. Maintain a daily record of progress (daily diary) noting special comments. Reports to Snr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Sign work permits on behalf of Company and to ensure that contractor’s compliance with work permits. Participate in development of as-built drawings/documentation. Accountable for supervising contractor’s work that is in progress, inspecting work, reporting problems and preventing accidents occurring because of negligence, by enforcing Company safety standards on the work site. Liaise and report with the QA/QC Inspector on quality related matters

متعاقد لينكدإن

Construction Supervisor (Piping)

في الموقع - قطر - الدوحة ١٧ يونيو ٢٠٢٦

الموارد البشرية

Vacancy Overview Construction Supervisor (Piping) Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry. Airswift is seeking for Construction Supervisor (Piping) to work in Qatar with a major Oil & Gas Company. Qualifications Bachelor’s Degree or Diploma in Mechanical Engineering from an internationally recognized University. Preferably having formal training in QA/QC functional aspects EXPERIENCE Candidate shall be a safety leader. Candidate should have a minimum of 10 years overall experience in piping erection (UG & AG), pressure testing, mechanical completion and construction of oil and gas facilities. Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred. Current experience in State of Qatar industrial cities and/or other GCC countries is required. Piping inspection and rotating equipment experience is an advantage, and inspection coordination experience in the. Extensive knowledge of international and industry specific piping codes and standards, including ASME, ANSI B31.3 & B31.1, SHELL DEP’s, etc. Piping, Welding / NDT inspector certificates (AWS / ASNT / CSWIP / API) would be an advantage. Extensiveexperience in pipe coating systems and procedures, including painting, galvanizing, wrapping, insulation, etc. BGAS certification would be an advantage. Extensive experience in fabrication pipe spooling, pipe supports and erection of carbon steel, stainless/alloy steel, u PVC and GRE/GRV piping systems, including pressure testing, pre-commissioning and mechanical completion inspection. Excellent written and oral English skills. Able to read piping drawings, P&ID’s and manufacturer’s instructions, etc. The candidate shall have specific stated experiences in;Greenfield/new build construction sites, o Brownfield/live process plants,Permits to work, incl Isolation & Lock Out/Tag Out of live services,Tie-in to live facilities, including testing and integration to existing systems, Extensive knowledge in Lifting Plan and Crane Studies. If candidate have Approved Lifting Supervisor Certificate it would be advantage. Stage Inspection and Testing of Construction activities as per approved ITPs Strong technical, prioritization and management skills. Good communication, influencing and interface skills. Proficient knowledge of computer programs (MSOffice, Outlook, Excel, Words, PDF, Power Point, etc) and engineering software applications relevant to the discipline. Primary Duties And Responsibilities Acts as a safety leader, ensuring EPIC Contractor’s work in compliance to Company Life Saving Rules and all safety and environmental regulations of Company and the State of Qatar. Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement. Assist functional supervisor in review and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs. Supervise all EPIC contractors piping (Process and Utility piping system with various material pipe classes for above ground & underground piped services) installation activities are based on approved the engineering documentation and project schedule during the execution of construction activities Attend Requests For Inspections (RFIs) as per approved ITPs, including Material Receiving Inspections in coordination with Reconstruction Supervisor, and sign off relevant inspection and test reports / RFIs. Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification. Lead the EPIC construction contractor(s) on all mechanical aspects of the piping works. Supervise with EPIC contractor during execution of the piping installation, line check, punch clearing, hydrotest and re-instatement at site. Manage and lead final mechanical completion inspections and punch closing. Supervise the Pre-Com activities to ensure safety and the quality of the completed work. Undertake technical integrity and HSE reviews/audits Participate in process safety management Participate in PSSR and provide support to Operations pre & start up activity where instructed. Co-ordinate mobilization of contractors on site. Carryout daily checks on contractor’s staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications. Good knowledge in reading and understanding P&ID, GA, ISOs, piping standard drawings (incl support drawings) and Equipment Layout drawings. Maintain a daily record of progress (daily diary) noting special comments. Reports to Snr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Sign work permits on behalf of Company and to ensure that contractor’s compliance with work permits. Participate in development of as-built drawings/documentation. Accountable for supervising contractor’s work that is in progress, inspecting work, reporting problems and preventing accidents occurring because of negligence, by enforcing Company safety standards on the work site. Liaise and report with the QA/QC Inspector on quality related matters

بيت.كوم

Construction Supervisor (Infrastructure)

في الموقع - قطر ٨ يونيو ٢٠٢٦

الهندسة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> * To supervise the EPIC Contractors during the execution of construction activities at construction site.* Participate in reviewing detailed design drawings, method statements, material requisitions, and etc. * Co-ordinate mobilization of contractors on site.* Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required. * Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.* Handle all aspects of Mechanical Construction activities including site investigations, site surveys and etc. * Supervise installation of Fire Electric/Diesel Pumps and Jockey pumps.* Supervise installation of deluge system piping works and underground firefighting piping works. * Supervise installation of Fire water tanks.* Good knowledge in Deluge and Sprinkler System. * Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.* Sign work permits on behalf of COMPANY and to ensure that contractors compliance with conditions fixed on consolidated work permits * Participate in development of as-built drawings/documentation.* Prepare Punch list for finished work prior to hand over to COMPANY by contractor by paying special attention to all equipment including Quality checks. * Works closely with other COMPANY Construction Supervisors (Elect/ Arch / Instrument).* Report to COMPANY Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement. * Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing COMPANY safety standards on the work site.* Liaise and report with the QC Inspector on quality related matters. * Liaise with the HSE Supervisor on safety related matters.* To prepare daily report of activities and inform COMPANY/asset holders (as per approved distribution matrix) of the progress/constraints and look ahead. <ul> <li>Candidate must possess a Degree or Diploma in Mechanical Engineering from an internationally recognized University.</li> <li>Candidate should have a minimum of 10 to 15 years overall experience in Construction of EHV Substations up to 132kV and above with exposure to mechanical works connected with substation Electrical equipment, HVAC equipment, Fire alarm & Loss prevention and Building Services.</li> <li>Must have good verbal and written communication skills to interface and communicate with internal and external departments, agencies, contractors and vendors.</li> </ul> <ul> <li>Salary:<ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li>Work Schedule:<ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li>Duration: <ul> <li>2 years, renewable</li> </ul> </li> <li>Location: <ul> <li>Qatar</li> </ul> </li> </ul> </div>

بيت.كوم

Scaffolding Supervisor

في الموقع - قطر ١٢ يونيو ٢٠٢٦

أخرى

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Responsibilities <ul><li>Supervision: Lead scaffolding crews in the safe erection, modification, and dismantling of scaffolding structures. </li><li>Planning: Organize daily scaffolding tasks, allocate manpower, and ensure adherence to project schedules. </li><li>Compliance Monitoring: Ensure scaffolding activities comply with CISRS standards, project specifications, and offshore safety requirements. </li><li>Inspection Support: Coordinate with scaffolding inspectors to verify scaffold safety and rectify deficiencies. </li><li>Documentation: Maintain records of scaffolding activities, inspection reports, and safety permits. </li><li>Safety Enforcement: Enforce offshore HSE standards, PPE usage, and permit-to-work systems during scaffolding operations. </li></ul> RequirementsRequirements <ul><li>Diploma/Certificate in Construction/Engineering or equivalent. </li><li>Minimum 5–7 years of offshore scaffolding experience, with at least 2 years in a supervisory role. </li><li>Strong knowledge of scaffolding design, load calculations, and offshore safety standards. </li><li>Ability to read and interpret scaffolding drawings and project specifications. </li><li>Familiarity with CISRS, ISO, and NOC standards. </li></ul>Certifications & Training <ul><li>CISRS-OSTS Scaffolding Supervisor Certification </li><li>BOSIET / HUET (OPITO certified) </li><li>Basic H2S Training </li><li>EPCIC Project HSES Induction </li></ul> </div>

دوام كامل

Supervisor

في الموقع - قطر - الدوحة ٢٥ يونيو ٢٠٢٦

الإدارة

The Transparencies & Oxygen Bay Supervisor will be an experienced and skilled mechanical supervisor, undertaking a range of detailed maintenance activities in the aircraft transparencies & oxygen bay, he will be responsible for maintaining airworthiness through appropriate task delegation and authorisation on the aircraft transparencies & oxygen bay activities. He will be responsible for tasking of work & supervision of personnel/people management. Responsible for meeting agreed delivery targets at a tactical level. Demonstrating people management and leadership skills. The post holder will be able to demonstrate awareness of broader external dependencies and identify areas for continuous improvement. Core Activity Undertaking detailed maintenance inspection and supervision activities on the aircraft transparencies & oxygen bay components Supervising team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme Ensuring staff are sufficiently competent and approved for the maintenance tasks allocated to them Maintain personal & teams task authorisation for working on an aircraft or components in accordance with AMC requirements Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management Provides guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information Ability to scope and carry out independent and vital inspections Maintaining personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s Log Books as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission Undertaking and complete tasked maintenance & diagnostic activities on the Typhoon’s Transparencies & Oxygen components, which may include, as appropriate, inspections, repairs, modifications, fault rectifications, replacements Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately Progress reporting against delivery targets to supervisor Undertaking support tasks within the Transparencies & Oxygen bay which are required to maintain compliance with the MOE and QAF procedures (e.g. oversight checks, control of tooling/test equipment) Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance Ensuring all maintenance activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Compile required reporting, identify any issues and escalate as appropriate Key Accountabilities Performance indicators – Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate Procedure/standards – Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required Completion of activities – Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure suitably qualified, experienced and authorised personnel perform all Part 145 activities. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team Safety Management System – Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards Management System Assurance – Ensure maintenance activities are compliant with the QAF governance and assurance framework, including supporting process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness Statutory/Regulatory & Legislative requirements – Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISOContractual Requirements – Comply with all applicable contractual requirements Requirements Qualifications/Functional Knowledge Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency & recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices On the Job Training Instructional Techniques Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application Typhoon Mechanical Trade ‘Q’ Course or equivalent. Ensure personal compliance with the risk assessments, SHE policies and procedures Human Factors- Standard Course Specification E&PW Awareness- Standard Course Specification ITAR Awareness- Standard Course Specification IT Literate UK Driving licence

متعاقد

Commissioning Instrument Supervisor - Offshore

في الموقع - قطر - الدوحة ٢٦ يوليو ٢٠٢٦

تكنولوجيا المعلومات

Job Purpose The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements. Key Responsibilities Supervise and coordinate all offshore instrument commissioning activities. Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities. Review and implement approved commissioning procedures, method statements, test packs, and project specifications. Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning. Coordinate Commissioning Activities For DCS, ESD, PLC, and SCADA systems Fire & Gas (F&G) systems Control valves and shutdown valves Pressure, temperature, flow, and level instruments Analyzers and metering systems Package equipment instrumentation Lead Cause & Effect testing and functional verification. Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors. Conduct system walkdowns and coordinate punch-list clearance. Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams. Monitor daily progress and provide regular reports to the Commissioning Manager. Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly. Support offshore start-up and operational readiness activities. Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements. Conduct toolbox talks and pre-job safety meetings. Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel. Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule. Minimum Qualifications Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline. Relevant technical certification in Instrumentation and Control Systems. Valid offshore safety certification such as BOSIET/FOET. Valid offshore medical fitness certificate. H2S certification, where required by the project. Experience Requirements Minimum 10 years of experience in Instrumentation and Control Systems. Minimum 5 years of experience in commissioning and start-up activities. Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer. Previous experience in offshore Oil & Gas projects is highly preferred.

متعاقد

Commissioning Instrument Supervisor - Offshore

في الموقع - قطر - الدوحة ٢٦ يوليو ٢٠٢٦

تكنولوجيا المعلومات

Job Purpose The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements. Key Responsibilities Supervise and coordinate all offshore instrument commissioning activities. Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities. Review and implement approved commissioning procedures, method statements, test packs, and project specifications. Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning. Coordinate Commissioning Activities For DCS, ESD, PLC, and SCADA systems Fire & Gas (F&G) systems Control valves and shutdown valves Pressure, temperature, flow, and level instruments Analyzers and metering systems Package equipment instrumentation Lead Cause & Effect testing and functional verification. Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors. Conduct system walkdowns and coordinate punch-list clearance. Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams. Monitor daily progress and provide regular reports to the Commissioning Manager. Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly. Support offshore start-up and operational readiness activities. Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements. Conduct toolbox talks and pre-job safety meetings. Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel. Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule. Minimum Qualifications Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline. Relevant technical certification in Instrumentation and Control Systems. Valid offshore safety certification such as BOSIET/FOET. Valid offshore medical fitness certificate. H2S certification, where required by the project. Experience Requirements Minimum 10 years of experience in Instrumentation and Control Systems. Minimum 5 years of experience in commissioning and start-up activities. Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer. Previous experience in offshore Oil & Gas projects is highly preferred.

Naukri Gulf

مشرف خزان

في الموقع - قطر - Qatar ١٣ يوليو ٢٠٢٦

الموارد البشرية

<section>الوصف الوظيفيالأدوار والمسؤوليات<div class="paragraph">1) يشرف على تنسيق أنشطة العمال المشاركين في إقامة وصيانة الخزانات المعدنية المستخدمة لتخزين المواد السائلة، مثل النفط الخام والغازoline والتدفئة: يركّب ويصون مكوّنات الخزان، مثل المقاييس الآلية، والصمامات، والمنافذ. 2) يؤدي واجبات أخرى كما هو موضح تحت لقب المشرف الرئيسي.</div></section><section>الملف المرشح المطلوبثالثة عشر فما فوق ومعرفة بمشرف الخزان</section>

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">1) Supervises and coordinates activities of workers engaged in erecting and maintaining metal tanks used to store liquid materials, such as crude oil, gasoline, and heating oil: Installs and maintains tank components, such as automatic gauges, valves, and vents. 2) Performs other duties as described under SUPERVISOR Master Title.</div></section><section>Desired Candidate Profile12th Passed & Knowledge of Tank Supervisor</section>

دوام كامل

Supervisor

في الموقع - قطر - الدوحة ٢٤ يونيو ٢٠٢٦

الطيران والملاحة

The Transparencies & Oxygen Bay Supervisor will be an experienced and skilled mechanical supervisor, undertaking a range of detailed maintenance activities in the aircraft transparencies & oxygen bay, he will be responsible for maintaining airworthiness through appropriate task delegation and authorisation on the aircraft transparencies & oxygen bay activities. He will be responsible for tasking of work & supervision of personnel/people management. Responsible for meeting agreed delivery targets at a tactical level. Demonstrating people management and leadership skills. The post holder will be able to demonstrate awareness of broader external dependencies and identify areas for continuous improvement. Core Activity: Undertaking detailed maintenance inspection and supervision activities on the aircraft transparencies & oxygen bay components Supervising team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme Ensuring staff are sufficiently competent and approved for the maintenance tasks allocated to them Maintain personal & teams task authorisation for working on an aircraft or components in accordance with AMC requirements Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management Provides guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information Ability to scope and carry out independent and vital inspections Maintaining personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s Log Books as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission Undertaking and complete tasked maintenance & diagnostic activities on the Typhoon’s Transparencies & Oxygen components, which may include, as appropriate, inspections, repairs, modifications, fault rectifications, replacements Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately Progress reporting against delivery targets to supervisor Undertaking support tasks within the Transparencies & Oxygen bay which are required to maintain compliance with the MOE and QAF procedures (e.g. oversight checks, control of tooling/test equipment) Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance Ensuring all maintenance activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Compile required reporting, identify any issues and escalate as appropriate Key Accountabilities: Performance indicators – Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate Procedure/standards – Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required Completion of activities – Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure suitably qualified, experienced and authorised personnel perform all Part 145 activities. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team Safety Management System – Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards Management System Assurance – Ensure maintenance activities are compliant with the QAF governance and assurance framework, including supporting process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness Statutory/Regulatory & Legislative requirements – Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO Contractual Requirements – Comply with all applicable contractual requirements Requirements Qualifications/Functional Knowledge: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency & recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices On the Job Training Instructional Techniques Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application Typhoon Mechanical Trade ‘Q’ Course or equivalent. Ensure personal compliance with the risk assessments, SHE policies and procedures Human Factors- Standard Course Specification E&PW Awareness- Standard Course Specification ITAR Awareness- Standard Course Specification IT Literate UK Driving licence Skills: • Comply with the latest issue of the BAE SYSTEMS Part 145 Maintenance Organisation Exposition (MOE) and general awareness of the defence logistics framework and associated procedures in relation to the movement of all logistics items • Receive all items, checking that all required documentation is present and correct and that the packaging is intact. Check that part numbers on documentation matches that marked on the part or parts packaging • Quarantine any non-conforming items for appropriate investigation action. • Record receipts using the electronic stock accounting systems and procedures currently in operation • Place stores and parts demands as required on IMS • Maintain the preservation of materials and equipment whilst in storage or transit • Ensure the storage, handling and movement of hazardous materials is carried out as defined within hazard data sheets and mandated procedures • Pick, pack and deliver parts requests to the customer, checking the right parts are delivered to the right place at the right time safely, including line side replenishment • Coordination of any Tasking requests that require forklift/vehicle support, providing that support and liaising with the requestor to ensure any access or support issues are addressed prior to the activity • Coordination of Forward Delivery activities, ensuring the QEAF members of staff know where to deliver to and where to collect from • Protect any materials for dispatch against transit damage • Identify and report inabilities of supply items to all relevant teams • Be able to coordinate and assist in the preparation of detachment pack ups • Assist in programmed/adhoc Stock Taking activities • Performing and understanding investigation activities on IMS to assist in and resolve any stock discrepancies • Deliver a Direct Line Feed (DLF) service to Depth and Forward, supplying and replenishing all consumable requirements, including POL. • Ensure the DLF Forward and Depth visit schedule is adhered to, preventing any consumable racks or POL in-use lockers from reaching nil stock • Maintain the physical storage, issue and receipt into and out of stock of all POL items • Conduct Warehouse husbandry and building oversite checks • Carry out shift work as required in rotation • Mentoring QEAF Team members of the Team in effective and safe Supply Chain Operations, including monitoring of IMS inputs by the QEAF

دوام كامل

Supervisor

في الموقع - قطر - الدوحة ٢٤ يونيو ٢٠٢٦

الطيران والملاحة

The Transparencies & Oxygen Bay Supervisor will be an experienced and skilled mechanical supervisor, undertaking a range of detailed maintenance activities in the aircraft transparencies & oxygen bay, he will be responsible for maintaining airworthiness through appropriate task delegation and authorisation on the aircraft transparencies & oxygen bay activities. He will be responsible for tasking of work & supervision of personnel/people management. Responsible for meeting agreed delivery targets at a tactical level. Demonstrating people management and leadership skills. The post holder will be able to demonstrate awareness of broader external dependencies and identify areas for continuous improvement. Core Activity: Undertaking detailed maintenance inspection and supervision activities on the aircraft transparencies & oxygen bay components Supervising team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme Ensuring staff are sufficiently competent and approved for the maintenance tasks allocated to them Maintain personal & teams task authorisation for working on an aircraft or components in accordance with AMC requirements Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management Provides guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information Ability to scope and carry out independent and vital inspections Maintaining personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s Log Books as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission Undertaking and complete tasked maintenance & diagnostic activities on the Typhoon’s Transparencies & Oxygen components, which may include, as appropriate, inspections, repairs, modifications, fault rectifications, replacements Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately Progress reporting against delivery targets to supervisor Undertaking support tasks within the Transparencies & Oxygen bay which are required to maintain compliance with the MOE and QAF procedures (e.g. oversight checks, control of tooling/test equipment) Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance Ensuring all maintenance activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Compile required reporting, identify any issues and escalate as appropriate Key Accountabilities: Performance indicators – Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate Procedure/standards – Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required Completion of activities – Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure suitably qualified, experienced and authorised personnel perform all Part 145 activities. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team Safety Management System – Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards Management System Assurance – Ensure maintenance activities are compliant with the QAF governance and assurance framework, including supporting process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness Statutory/Regulatory & Legislative requirements – Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO Contractual Requirements – Comply with all applicable contractual requirements Requirements Qualifications/Functional Knowledge: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency & recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices On the Job Training Instructional Techniques Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application Typhoon Mechanical Trade ‘Q’ Course or equivalent. Ensure personal compliance with the risk assessments, SHE policies and procedures Human Factors- Standard Course Specification E&PW Awareness- Standard Course Specification ITAR Awareness- Standard Course Specification IT Literate UK Driving licence Skills: • Comply with the latest issue of the BAE SYSTEMS Part 145 Maintenance Organisation Exposition (MOE) and general awareness of the defence logistics framework and associated procedures in relation to the movement of all logistics items • Receive all items, checking that all required documentation is present and correct and that the packaging is intact. Check that part numbers on documentation matches that marked on the part or parts packaging • Quarantine any non-conforming items for appropriate investigation action. • Record receipts using the electronic stock accounting systems and procedures currently in operation • Place stores and parts demands as required on IMS • Maintain the preservation of materials and equipment whilst in storage or transit • Ensure the storage, handling and movement of hazardous materials is carried out as defined within hazard data sheets and mandated procedures • Pick, pack and deliver parts requests to the customer, checking the right parts are delivered to the right place at the right time safely, including line side replenishment • Coordination of any Tasking requests that require forklift/vehicle support, providing that support and liaising with the requestor to ensure any access or support issues are addressed prior to the activity • Coordination of Forward Delivery activities, ensuring the QEAF members of staff know where to deliver to and where to collect from • Protect any materials for dispatch against transit damage • Identify and report inabilities of supply items to all relevant teams • Be able to coordinate and assist in the preparation of detachment pack ups • Assist in programmed/adhoc Stock Taking activities • Performing and understanding investigation activities on IMS to assist in and resolve any stock discrepancies • Deliver a Direct Line Feed (DLF) service to Depth and Forward, supplying and replenishing all consumable requirements, including POL. • Ensure the DLF Forward and Depth visit schedule is adhered to, preventing any consumable racks or POL in-use lockers from reaching nil stock • Maintain the physical storage, issue and receipt into and out of stock of all POL items • Conduct Warehouse husbandry and building oversite checks • Carry out shift work as required in rotation • Mentoring QEAF Team members of the Team in effective and safe Supply Chain Operations, including monitoring of IMS inputs by the QEAF

متعاقد لينكدإن

مشرف إنشاءات (ميكانيكا)

في الموقع - قطر - الدوحة الثلاثاء

الموارد البشرية

مشرف إنشاءات (ميكانيكا) الموقع: مسيعيد، قطر القطاع: النفط والغاز (الوسطى / النهائية) يبحث عميلنا عن مشرف إنشاءات (ميكانيكا) ذي خبرة لدعم مراحل الإنشاء والتركيب والفحص والاختبار والتشغيل الأولي لمشروع رئيسي في مجال النفط والغاز. المتطلبات درجة علمية أو دبلوم في الهندسة الميكانيكية (إلزامي) تدريب رسمي في مجال ضمان الجودة/ضبط الجودة (QA/QC) خبرة لا تقل عن 10 سنوات في مشاريع إنشاءات النفط والغاز خبرة مثبتة في تركيب المعدات الثابتة والدوارة خبرة في تنسيق عمليات الفحص أثناء إنشاء مرافق النفط والغاز في القطاع الأوسط و/أو النهائي خبرة إلزامية كمشرف لدى مقاول (EPIC) ويفضل وجود خبرة كمشرف لدى العميل أو شركة إدارة المشاريع (PMC) معرفة قوية بالمعايير والمواصفات الدولية بما في ذلك ASME وANSI وAPI وISO وNFPA وShell DEP والأكواد الصناعية ذات الصلة خبرة في اختبارات القبول في المصنع (FAT)، ومحاذاة المعدات، وأنشطة الفحص، واختبار الضغط، وإدارة قائمة النواقص، والإنجاز الميكانيكي، والتشغيل الأولي معرفة واسعة بأنظمة الطلاء بما في ذلك الدهان، والجلفنة، والتغليف، والعزل، ومتطلبات الحماية ذات الصلة خبرة في العمل في بيئات المشاريع الجديدة (Greenfield) والمشاريع القائمة (Brownfield) فهم قوي لتصاريح العمل (PTW)، ونظام العزل والإغلاق (LOTO)، وأعمال الربط بالمرافق الحية، وواجهات اختبارات الإنشاء والتشغيل القدرة على قراءة وتفسير مخططات الأنابيب والآلات (P&IDs)، وتخطيطات المعدات، والرسومات الميكانيكية، ووثائق الشركات المصنعة. المسؤوليات الرئيسية الإشراف على أنشطة تركيب المعدات الثابتة والدوارة تنسيق عمليات الفحص وطلبات المعلومات (RFIs) وأنشطة الاختبار مراقبة امتثال المقاول للإجراءات والمواصفات والمتطلبات المعتمدة للمشروع دعم الإنجاز الميكانيكي، وإغلاق قوائم النواقص، وأنشطة التشغيل الأولي التنسيق مع فرق ضمان الجودة/ضبط الجودة (QA/QC)، والصحة والسلامة والبيئة (HSE)، والموردين، وأصحاب المصلحة في المشروع لضمان تنفيذ العمل بأمان وبجودة عالية. نشجع المرشحين المهتمين على التقديم مباشرة أو إرسال سيرتهم الذاتية إلى mahirah.marisa@airswift.com نرحب أيضًا بالإحالات—لا تترددوا في مشاركة هذه الفرصة مع المهنيين المؤهلين في شبكتكم. **سيتم التواصل فقط مع المرشحين الذين يتم اختيارهم للقائمة المختصرة. شكرًا لتفهمكم. الموعد النهائي: 4 سبتمبر 2026 (لن يتم النظر في أي طلبات بعد هذا التاريخ).

Construction Supervisor (Mechanical) Location: Mesaieed, Qatar Sector: Oil & Gas (Midstream / Downstream) Our client is seeking an experienced Construction Supervisor (Mechanical) to support the construction, installation, inspection, testing, and pre-commissioning phases of a major Oil & Gas project. Requirements Degree or Diploma in Mechanical Engineering (mandatory) Formal QA/QC functional training Minimum 10 years' experience in Oil & Gas construction projects Proven experience in Static and Rotating Equipment Installation Experience coordinating inspections during Midstream and/or Downstream facility construction of Oil and Gas Mandatory experience as an EPIC Contractor Supervisor Experience as a Client or PMC Supervisor preferred Strong knowledge of international standards and specifications including ASME, ANSI, API, ISO, NFPA, Shell DEP and related industry codes Experience with FAT, equipment alignment, inspection activities, pressure testing, punch list management, mechanical completion and pre-commissioning Extensive knowledge of coating systems including painting, galvanizing, wrapping, insulation and related preservation requirements Experience working in Greenfield and Brownfield environments Strong understanding of PTW, LOTO, tie-ins to live facilities, construction testing and commissioning interfaces Ability to read and interpret P&IDs, equipment layouts, mechanical drawings and manufacturer documentation. Key Responsibilities Supervise static and rotating equipment installation activities Coordinate inspections, RFIs and testing activities Monitor contractor compliance with approved procedures, specifications and project requirements Support mechanical completion, punch close-out and pre-commissioning activities Interface with QA/QC, HSE, vendors and project stakeholders to ensure safe and quality execution of work. Interested candidates are encouraged to apply directly or send their CV to mahirah.marisa@airswift.com Referrals are welcome too—feel free to share this opportunity with qualified professionals in your network. **Only shortlisted candidates will be contacted. Thank you for your kind understanding. Deadline: 4 September 2026 (Any applications after this date will not be considered).

دوام كامل

Site Security Supervisor

في الموقع - قطر - الدوحة ٤ أغسطس ٢٠٢٦

الهندسة

Job Overview An established organization is seeking an experienced Security Supervisor to lead and oversee security operations across commercial facilities. The successful candidate will be responsible for supervising security personnel, ensuring compliance with security procedures, coordinating emergency response activities, and maintaining a safe and secure environment for clients, employees, and visitors. Key Responsibilities Supervise and coordinate security officers during assigned shifts. Monitor access control systems and CCTV operations to ensure effective site security. Conduct routine site patrols, inspections, and security checks. Manage security incidents, investigations, and incident reporting. Ensure compliance with company policies, client requirements, and established security procedures. Coordinate and support emergency response activities when required. Train, mentor, and evaluate security personnel to maintain high performance standards. Prepare daily, weekly, and incident reports for management and clients. Requirements Minimum 5 years of experience in the security industry. Previous experience in a supervisory or team leadership role. Fluent in Arabic and English (spoken and written). Willing and able to attend client interviews prior to deployment. Strong leadership, communication, and problem-solving skills. Ability to manage teams, respond effectively to incidents, and maintain operational discipline. Preferred Qualifications Security-related certifications. Valid First Aid Certificate. Valid Qatar Driving Licence.

دوام كامل

Site Security Supervisor

في الموقع - قطر - الدوحة ٤ أغسطس ٢٠٢٦

الهندسة

Job Overview An established organization is seeking an experienced Security Supervisor to lead and oversee security operations across commercial facilities. The successful candidate will be responsible for supervising security personnel, ensuring compliance with security procedures, coordinating emergency response activities, and maintaining a safe and secure environment for clients, employees, and visitors. Key Responsibilities Supervise and coordinate security officers during assigned shifts. Monitor access control systems and CCTV operations to ensure effective site security. Conduct routine site patrols, inspections, and security checks. Manage security incidents, investigations, and incident reporting. Ensure compliance with company policies, client requirements, and established security procedures. Coordinate and support emergency response activities when required. Train, mentor, and evaluate security personnel to maintain high performance standards. Prepare daily, weekly, and incident reports for management and clients. Requirements Minimum 5 years of experience in the security industry. Previous experience in a supervisory or team leadership role. Fluent in Arabic and English (spoken and written). Willing and able to attend client interviews prior to deployment. Strong leadership, communication, and problem-solving skills. Ability to manage teams, respond effectively to incidents, and maintain operational discipline. Preferred Qualifications Security-related certifications. Valid First Aid Certificate. Valid Qatar Driving Licence.

دوام كامل لينكدإن

Lifting Supervisor

في الموقع - قطر - Al Khor and Al Thakhira ٢٩ يونيو ٢٠٢٦

الهندسة

A leading Construction Project is hiring for Lifting Supervisor Qualification:Diploma or Bachelor’s degree in Mechanical Engineering or related field Valid Lifting Supervisor Certification (e.g., LEEA / Third Party Approved) Strong knowledge of lifting operations, rigging practices, and crane safety Familiarity with load charts, lifting plans, and risk assessments Good understanding of HSE regulations and safe lifting procedures Minimum 5 Years in Oil & Gas Industry Responsibilities:Supervise and coordinate all lifting and rigging activities on site Ensure all lifting operations are conducted according to approved lifting plans Verify crane certifications, lifting equipment, and operator competency Conduct toolbox talks and pre-lift meetings Ensure compliance with safety standards and HSE regulations Inspect lifting gear and ensure proper usage and maintenance Coordinate with crane operators, riggers, and site teams Stop unsafe lifting activities and implement corrective actions Maintain records of lifting operations and inspections Requirement:Candidates should be present in Qatar with a valid QIDSend us your Latest CV, Experience Certificates, etc. Free visa holders only, candidates must be inside Qatar (Immediate joiners only need to apply) Note:Applications without the above-mentioned documents will be rejected. All experience certificates must be attached to the CV covering 5 years of experience

متعاقد

Pre Commissioning Supervisor Piping

في الموقع - قطر - Al Khor and Al Thakhira ٢ أغسطس ٢٠٢٦

تكنولوجيا المعلومات

Job Title: Pre Commissioning Supervisor-Piping Job Location: Ras Laffan Job Summary:We are seeking an experienced Pre-Commissioning Supervisor – Piping to lead and coordinate pre-commissioning activities for major Oil & Gas projects. The successful candidate will be responsible for planning, supervising, and executing piping pre-commissioning activities while ensuring compliance with project specifications, safety standards, and completion procedures. The role requires strong technical expertise in piping systems, commissioning documentation, and project handover. Mandatory Requirements & Qualifications:Experience:Minimum 7 years of experience as a Pre-Commissioning Engineer/Supervisor in the Oil & Gas industry. Experience on EPC projects involving piping systems. Ras Laffan project experience will be an added advantage. Education:Diploma or B. Tech in Mechanical Engineering. Technical Skills:Strong knowledge of piping pre-commissioning and commissioning activities. Experience preparing Method Statements, JSAs, Work Packs, and commissioning documentation. Familiarity with completions management systems and project handover processes. Knowledge of SHES requirements and industry safety standards. Ability to prepare schedules, resource plans, and progress reports. Good command of written and spoken English. Mandatory Criteria:Must have Oil & Gas pre-commissioning experience. Minimum 7 years of relevant experience. Mechanical Engineering qualification (Diploma/B. Tech). Ability to join projects in Qatar. Ras Laffan project experience is preferred. Key Responsibilities:Review project engineering, technical, and SHES documentation before execution. Prepare Pre-Commissioning Method Statements, JSAs, and work packs. Plan and coordinate pre-commissioning schedules, manpower, and resources. Identify and arrange required tools, test equipment, temporary facilities, consumables, lubricants, and third-party services. Coordinate with the Completions team to update system and sub-system completion databases. Participate in constructability reviews to ensure smooth pre-commissioning and handover. Ensure all commissioning records, documentation, and handovers comply with project procedures. Promote and maintain a strong safety culture throughout all pre-commissioning activities. Monitor progress and prepare accurate daily, weekly, and monthly status reports. Coordinate with construction, QA/QC, commissioning, and client teams to achieve timely project completion.

وظائف رائد نشاط

مشرف

مشرف/ة الترفيه

مشرف ورشة

مشرف الترفيه

Construction Supervisor (Piping)

Construction Supervisor (Piping)

Construction Supervisor (Piping)

Construction Supervisor (Infrastructure)

Scaffolding Supervisor

Supervisor

Commissioning Instrument Supervisor - Offshore

Commissioning Instrument Supervisor - Offshore

مشرف خزان

Supervisor

Supervisor

مشرف إنشاءات (ميكانيكا)

Site Security Supervisor

Site Security Supervisor

Lifting Supervisor

Pre Commissioning Supervisor Piping

أصحاب المواقع

أصحاب العمل

الباحثين عن عمل

وظائف رائد نشاط

اشترك لتصلك وظائف وظائف رائد نشاط الجديدة دوريا علي بريدك