وظائف مهندس تبريد في قطر
١٠٢٩ وظائف شاغرة
Our engineers are the technical visionaries behind our innovative solutions. Globally recognized for delivering cutting-edge systems, you’ll tackle complex challenges, collaborate across functions, and lead advancements that shape our industry. Supported by a culture of flexibility, growth, and innovation, join us to create a lasting legacy in safety and simulation.<br><br>Description<br><br>Provide technical support for Flight Simulator Training Devices (FSTDs) and other training devices, including attending maintenance calls, device setup, conversions, demonstrations, simulator flight tests, and snag clearance activities. Independently perform Preventive Maintenance Tasks (PMTs), Daily Readiness (DR), recurrent QTG runs, Aircraft Database (ADB) updates, and IOS Lesson Plan (LP) updates on training devices and associated systems, ensuring all tasks are completed in accordance with established standards. Ensure deficiencies identified during maintenance, readiness, or QTG activities are properly followed up, actioned, and closed within required timelines. Diagnose, troubleshoot, and resolve training device issues, including Aircraft on Ground (AOG) events and issues raised by National Aviation Authorities (NAAs). Perform hardware refurbishment and modifications, identify recurring issues, and contribute to the development of permanent corrective solutions. Monitor Sim Hub and Sim Issues for updates and use the Computerized Maintenance Management System (CMMS) to record, track, review, update, and monitor deficiencies and maintenance activities. Produce reports for TCOPS Management to support performance monitoring and trend analysis. As assigned, act in roles such as Shift Lead, Team Lead, Device Caretaker, or Task Caretaker, managing all aspects of the assigned role autonomously. Create, improve, and update procedures and guidelines for new, routine, and non-routine tasks. Collaborate with FSTD Technical Specialists on issues requiring advanced testing and troubleshooting, and support special projects based on Training Center operational needs. Mentor and provide On-the-Job Training (OJT) to junior colleagues, supporting complex tasks and corrective maintenance activities. Continuously develop technical knowledge and skills to progress toward subject matter expertise in one or more FSTD systems (e.g., Visual, Motion, Flight Controls, QTGs). Comply with all local and global CAE Environmental Health & Safety (EHS) standards, instructions, and safe working procedures, exercising duty of care for personal health and safety and that of others.<br><br>Minimum Qualifications<br><br>Technical College Diploma or Degree in Electronics, Electrical, Mechanical, Aeronautical, or Aerospace Engineering. Minimum of 7 years of relevant experience supporting Flight Simulation Training Devices or comparable technical systems. Excellent command of the English language, both written and spoken. Strong customer orientation with the ability to act professionally and tactfully in sensitive situations. Demonstrated initiative and ability to work independently with minimal supervision. Ability to work flexible shifts and adapt to changing work schedules and shift patterns. Solid understanding of aircraft and FSTD terminology. Ability to interpret schematics, drawings, and other technical documentation related to FSTDs. Proven capability to perform Preventive Maintenance Tasks and Daily Readiness activities on FSTDs. Strong troubleshooting skills across electronic, electrical, hydraulic, and pneumatic systems. Proficiency in the use of test equipment and software diagnostic tools. Good understanding of aircraft systems, avionics, motion, and visual systems. Good computer skills, including proficiency with Microsoft Office applications (Word, Excel, etc.). Basic knowledge of computer architecture, networking, operating systems (Windows NT/XP, UNIX, Linux, AIX), and programming languages (C, C++, FORTRAN). Basic knowledge of local and international regulations (EASA, FAA, etc.) applicable to Flight Simulation Training Devices.<br><br>Preferred Qualifications<br><br>Prior experience acting in a lead role (Shift Lead, Team Lead, Device Caretaker, or equivalent). Experience mentoring junior engineers or technicians in a simulator or training environment. Exposure to QTG activities, simulator acceptance processes, or authority-related evaluations. Experience supporting multiple FSTD systems or complex training center operations.<br><br>About CAE<br><br>At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we’ve driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success.<br><br>Position Type <br><br>Regular<br><br>Equal Opportunity & Accommodations<br><br>CAE is committed to providing equal opportunities to all applicants, regardless of race, nationality, color, religion, sex, gender identity or expression, sexual orientation, disability, neurodiversity, veteran status, age, or other characteristics protected by law. We encourage applicants who may not meet every qualification to apply. Reasonable accommodations are available—contact your recruiter or email CAECarrieres-Careers@cae.com if needed.<br><br>Data Privacy<br><br>Privacy Statement | CAE<br><br>CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
<section><p class="heading jdMain">وصف الوظيفة</p><p class="heading">الأدوار والمسؤوليات</p><div class="paragraph"><p>في عالم من الإمكانات، اختر واحداً يفتح أمامك فرصاً لا حصر لها. تخيل المستقبل! في Parsons، يمكنك تخيل مسار مهني تزدهر فيه، وتعمل مع أشخاص استثنائيين، وتكون على طبيعتك. مسترشداً برؤيتنا القيادية التي تقدر الأشخاص، وتتبنى المرونة، وتدعم النمو، نزرع ثقافة مبتكرة تمكّنك من تحقيق إمكاناتك الكاملة. أطلق العنان لمواهبك وأعد تعريف ما هو ممكن.</p><p>تبحث Parsons عن كبير مهندسي بستنة موهوب للغاية لينضم إلى فريقنا! في هذا الدور، ستقود التخطيط البستاني، والإشراف، وضبط الجودة لعمليات المناظر الطبيعية في مشاريع البنية التحتية واسعة النطاق، والتطوير الحضري، والمجالات العامة، والمشاريع التجارية. ستتأكد من أن تصميم النبات وتنفيذه وصيانته تفي بمواصفات المشروع ومتطلبات الاستدامة وظروف البيئة المحلية، مع التنسيق الوثيق مع الفرق متعددة التخصصات والمتعاقدين.</p><p>ما ستفعله</p><ul><li>قيادة الجوانب البستانية في مشاريع المناظر الطبيعية، بما في ذلك مدخلات تصميم الزراعة، واختيار الأنواع، واستراتيجيات الصيانة.</li><li>مراجعة واعتماد لوحات النباتات، وخطط الزراعة، والمواصفات البستانية لضمان الملاءمة للمناخ المحلي، والتربة، والظروف البيئية (بما في ذلك البيئات الجافة).</li><li>الإشراف ورصد أعمال الزراعة في الموقع، بما في ذلك الأشجار والشجيرات والنباتات الأرضية والعشب والزرع المتخصص (مثلاً أسطح المباني العمودية والداخلية والمناظر).</li><li>تقييم صحة النبات وأدائه وتوصية بالإجراءات التصحيحية (مثل التقليم، الاستبدال، تحسين التربة، إدارة الآفات/الأمراض).</li><li>تنسيق الأنشطة البستانية مع مناظر طبيعية، ري، مدني، معماري، وتخصصات MEP لضمان التنفيذ المتكامل وخالٍ من التعارض.</li><li>إجراء تفتيشات منتظمة في الموقع ومراجعات جودة للتحقق من مطابقة أعمال الزراعة لمعايير المشروع ومواصفاته وأفضل الممارسات البستانية.</li><li>تقييم مخزون المشتل وتوصيل النباتات لضمان الجودة والحجم والصحة بما يتماشى مع العروض المعتمدة.</li><li>نصح حول تجهيز التربة، والتغطية بالتربة، والتسميد، وتقنيات تثبيت النباتات.</li><li>دعم تطوير وتنفيذ خطط الصيانة، بما في ذلك جداول الري، وبرامج التقليم، ومكافحة الآفات والأمراض، والزراعة الموسمية.</li><li>مراجعة تقدم المقاول المرتبط بالأعمال البستنية، وتحديد النواقص، وتوصية أو الإشراف على إجراءات التصحيح.</li><li>إعداد التقارير الفنية، وتقارير التفتيش، وتقييمات صحة النبات، وتقديم العروض بعناصر مفاهيمية ومحتوى بصري.</li><li>تقديم الإرشاد البستاني أثناء الاختبار، والتفويض، وتسليم مناطق المناظر الطبيعية إلى العملاء أو السلطات المشغلة.</li><li>ضمان الامتثال لمتطلبات الصحة والسلامة والبيئة والجودة ضمن عمليات المناظر الطبيعية والبستنة.</li><li>توجيه وتقديم الدعم الفني للموظفين الفرعيين في مجال المناظر الطبيعية/البستنة حسب الحاجة.</li></ul></div></section><section><p class="heading">المرشح المطلوب</p><p class="paragraph"></p><ul><li>درجة البكالوريوس في البستنة (مفضل) أو مجال دراسي ذي صلة مباشرة؛ أو مزيج من التعليم ذي الصلة مباشرة، الخبرة، والتدريب.</li><li>خبرة 12 سنة في مشاريع مناظر طبيعية كبيرة تشمل الحفاظ والصيانة لأعمال المناظر الطبيعية.</li><li>خبرة في التضاريس الجافة بفهم قوي لملاءمة وأداء مواد النبات في مثل هذه الظروف.</li><li>القدرة على تفسير مستندات العقد المعقدة، بما في ذلك المخططات، والمواصفات، والرسومات التنفيذية.</li><li>القدرة على مراجعة الرسومات، والمواصفات، والتركيبات من أجل القابلية للبناء والامتثال لنية التصميم.</li><li>خبرة في التصميم الحضري والإشراف، بما في ذلك المساحات الخضراء الراقية للمشروعات التجارية.</li><li>خبرة في إعداد التقارير والطلبات، بما في ذلك العناصر المفاهيمية والمحتوى البصري/البستاني.</li><li>إتقان متقدم للبرامج ذات الصلة، بما في ذلك Vectorworks، AutoCAD، Microsoft Office (Word, Excel, PowerPoint, Outlook)، وبرامج التصوير الرقمي الحديثة/التصور.</li><li>مهارات اتصال مكتوبة وشفوية جيدة باللغة الإنجليزية.</li><li>يجب أن يكون لديه تسجيل UPDA/MME في قطر.</li><li>خبرة في منطقة مجلس التعاون الخليجي وفهم تراثها الثقافي، خاصة فيما يتعلق بالمجال العام وتصميم المناظر الطبيعية.</li><li>خبرة في البنية التحتية على نطاق واسع، والحدائق العامة، والشوارع، والطرق السريعة، ومناطق استاد الحشود، وتطويرات المناظر الحضرية الأخرى.</li><li>الإلمام بممارسات البستنة المستدامة، بما فيها الزراعة الموفرة للماء، وتعزيز التنوع البيولوجي، وإدارة الآفات المتكاملة (IPM).</li><li>مهارات تنسيق قوية، مع القدرة على العمل بفعالية مع المقاولين ومزارع النخيل وفرق المشروع متعددة التخصصات.</li><li>مهارات قوية في حل المشكلات واتخاذ القرار، مع اهتمام عالٍ بالتفاصيل وجودة الإدارة.</li><li>القدرة على إدارة عدة أنشطة ومهام موقعية وتحديد الأولويات والوفاء بمواعيد المشروع.</li></ul><p></p></section>
<section><p class="heading jdMain">وصف الوظيفة</p><p class="heading">الأدوار والمسؤوليات</p><div class="paragraph"><p>سيشارك كبير مهندسي المواد بدور حاسم في دعم مشاريع أشغال، ضمن قسم الإشراف في GEC. يتضمن هذا المنصب إدارة ومراقبة أنشطة هندسة المواد، مع التركيز على الحفاظ على معايير عالية والالتزام بمتطلبات المشروع. سيسهم المرشح الناجح في النجاح العام لمشروعات البنية التحتية في قطر.</p><p>الإشراف على أنشطة هندسة المواد لمشروعات أشغال، مع ضمان الامتثال لمواصفات المشروع ومعايير الجودة. مراجعة واعتماد خطط اختبار وفحص المواد، والتأكد من مواءمتها مع متطلبات المشروع. إجراء زيارات ميدانية منتظمة لمراقبة عمليات هندسة المواد وتقديم الإرشاد لفِرَق الموقع. التعاون مع مديري المشاريع وأصحاب المصلحة لضمان دمج أنشطة هندسة المواد ضمن جداول المشروع. إدارة وتوجيه فريق من مهندسي المواد، وتوفير التوجيه الفني والدعم. متابعة أحدث اتجاهات الصناعة والتطورات في ممارسات هندسة المواد. إعداد وتقديم تقارير شاملة عن أنشطة هندسة المواد، بما في ذلك التوصيات والنتائج. المشاركة في اجتماعات المشروع وتقديم مدخلات خبيرة في المسائل المتعلقة بالمواد. ضمان الامتثال لمتطلبات وأنظمة أشغال خلال دورة حياة المشروع.</p></div></section><section><p class="heading">الملف المرغوب فيه للمرشح</p><p class="paragraph"></p><ul><li>درجة البكالوريوس في هندسة المواد أو مجال ذي صلة، ويفضّل الحصول على درجة الماجستير.</li><li>خبرة لا تقل عن 12 عامًا في هندسة المواد، مع خلفية قوية في مشاريع البنية التحتية.</li><li>التسجيل المهني أو الشهادة في هندسة المواد ميزة كبيرة.</li><li>خبرة مثبتة في إدارة والإشراف على أنشطة هندسة المواد للمشروعات الكبيرة.</li><li>معرفة ممتازة بتقنيات اختبار وفحص المواد ومعايير الصناعة.</li><li>قدرات قيادية وتوجيهية قوية، مع القدرة على إرشاد وتطوير فريق.</li><li>إلمام ببرامج إدارة المشاريع ومجموعة MS Office.</li><li>مهارات تواصل وتفاعل بين الأشخاص ممتازة، مع قدرة على التعاون بشكل فعال.</li><li>الرغبة في السفر والعمل ميدانياً حسب ما تقتضيه احتياجات المشروع.</li><li>نهج استباقي وموجه نحو الحلول في حل المشكلات.</li><li>يجب أن يحمل تسجيل MMUP/UPDA ساري المفعول (تصنيف المهندس) في قطر.</li></ul><p></p></section>
الغرض الرئيسي من الوظيفة<br><br>مسؤول عن قيادة مهندسي تخصصات الجاهزية التشغيلية، وفنيي التخصصات بالتنسيق مع فريق مشروع قطر للطاقة والمقاولين لضمان تنفيذ متسق وموحد لتصميم المشروع، وأنشطة ما قبل التشغيل، والتكليف، وبدء التشغيل لمشاريع منطقة العمليات (إدارة العمليات) وفقاً لإجراءات قطر للطاقة المعتمدة، والمبادئ التوجيهية، والتصميم الهندسي، ومعايير/مواصفات السلامة والبيئة ونطاق العمل لضمان ما يلي:<br><br>أن يكون مالكو أصول منطقة العمليات مستعدين تماماً لتولي ملكية الأصول في نقطة التسليم/الاستلام، وأنهم قادرون على تشغيل وصيانة تلك الأصول بطريقة آمنة وموثوقة ومستدامة. أن يتم تسليم مشاريع منطقة العمليات (إدارة العمليات) بشكل أسرع بكثير، وبتكلفة أقل بكثير، وبأعلى إنتاجية مع الحفاظ على أعلى معايير الجودة والصحة والسلامة والبيئة.<br><br>الخبرات والمهارات المطلوبة<br><br>خبرة لا تقل عن 15 عاماً في تصميم وبناء وتشغيل وبدء تشغيل مرافق معالجة وإنتاج النفط والغاز (برية/بحرية)، ويفضل أن تكون مع شركات مقاولات هندسية وإنشائية (EPIC)، منها ما لا يقل عن ثماني (8) سنوات كمنسق تكليف/قائد فريق.<br><br>خبرة في العمليات والصيانة، وأنشطة ما قبل التشغيل وبدء التشغيل والتسليم للمشاريع.<br><br>المؤهلات التعليمية<br><br>درجة البكالوريوس في تخصص هندسي، ويفضل الهندسة الكيميائية / العمليات / الميكانيكية. يفضل الحصول على حالة مهندس معتمد (Chartered Engineer) أو ما يعادلها.
Position: Lead Quality Engineer Location: Ras Laffan, Qatar Industry: EPC / Oil & Gas (Onshore & Offshore)<br>Skills & Knowledge:Strong knowledge of ISO 9001:2015 Quality Management Systems (QMS) and EPC quality processes. Proven experience in QA/QC management for Oil & Gas, Offshore, Onshore, LNG, and Petrochemical projects. Expertise in international codes and standards including ASME, API, ASTM, AWS, ISO, and NACE. Experience in welding inspection, NDT, fabrication, piping, pressure vessels, and mechanical quality control. Ability to develop and implement Project Quality Plans (PQP), Inspection & Test Plans (ITPs), and quality procedures. Strong leadership skills with experience managing multidisciplinary QA/QC teams and coordinating with clients, contractors, and third-party inspectors. Experienced in conducting quality audits, managing NCRs/CAPAs, and driving continuous improvement initiatives. Excellent communication, problem-solving, and stakeholder management skills with the ability to ensure compliance with project specifications and international standards.<br>Qualifications Bachelor's Degree (B. E./B. Tech) in Mechanical Engineering. Minimum 12 years of QA/QC experience in EPC Oil & Gas projects. Proven experience in major Onshore and Offshore Oil & Gas projects. Minimum 5 years of experience in a QA/QC Lead role.<br>Mandatory Certifications CSWIP 3.2.1 / 3.2.2 – Senior Welding Inspector (Mandatory) ASNT/PCN Level II in: (RT) (UT) (MT/MPI), (PT) ISO 9001:2015 Lead Auditor Certification
Reports To: Operations Engineering Manager Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions This position will prepare cost estimates for bidding multimillion dollar worth Oil and Gas Projects.<br>Tasks and Responsibilities Review customer/Bid tender package to fully understand SWO, specifications and schedule. Raises clarifications where necessary. Reviews and understands contract price form, clarifies unit rate and lump sum breakdown. Understands planned bid strategy, build sequences and methods to execute the scope of work from operations engineer. Issues technical execution plan. Request and Coordinates inputs from Operations / Production / Shop Engineers, Yard Superintendents, Planning, Welding Engineers, QA/QC, Construction Support Engineering, Procurement. Checks if any new equipment Is required to execute work. Obtains cost by liaising with Procurement. Prepares RFQ for scope that cannot be executed inhouse and issues to Procurement to obtain subcontractor quotes. Performs RFQ Bid Evaluations and selects subcontractor with competitive pricing. Performs quantity take-offs, determines workforce, rental equipment, and material cost. Prepares detailed estimates in accordance with the scope of work based on standard rates, historical performance or first principle. Compiles the overall estimates. Conducts reviews with management to finalize estimates. Ensure Bid estimates are fully approved and signed off by all. Records all basis of Bid estimate in a formal document. Records all communication, assumptions done at Bid in a manner that same can be easily referred during later date (at execution). Maintains historical records of estimates. Compiles actual performance of repeated works performed in yard and works out benchmarks to be considered for bidding purpose. Compares actuals to estimates and understands reasons for variance. Recommends benchmarks revision where necessary. Takes lead on new initiatives, developments, and suggestions from management to improve.<br>Qualifications, Experience and Skills Qualifications:Diploma or Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 5+ Years in offshore construction involving structures like jackets, topsides, bridges. Understand components, construction methods and processes.<br>Skills: Ability to read Engineering Drawings. Excellent written and spoken communication skills. Well versed in working with Microsoft Office, Power Point, Excel, PDF, and computer applications. Ability to meet challenging deadlines and manage changes (internally or externally imposed).
Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.
Reports To: Operations Engineering Manager Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions This position will prepare cost estimates for bidding multimillion dollar worth Oil and Gas Projects.<br>Tasks and Responsibilities Review customer/Bid tender package to fully understand SWO, specifications and schedule. Raises clarifications where necessary. Reviews and understands contract price form, clarifies unit rate and lump sum breakdown. Understands planned bid strategy, build sequences and methods to execute the scope of work from operations engineer. Issues technical execution plan. Request and Coordinates inputs from Operations / Production / Shop Engineers, Yard Superintendents, Planning, Welding Engineers, QA/QC, Construction Support Engineering, Procurement. Checks if any new equipment Is required to execute work. Obtains cost by liaising with Procurement. Prepares RFQ for scope that cannot be executed inhouse and issues to Procurement to obtain subcontractor quotes. Performs RFQ Bid Evaluations and selects subcontractor with competitive pricing. Performs quantity take-offs, determines workforce, rental equipment, and material cost. Prepares detailed estimates in accordance with the scope of work based on standard rates, historical performance or first principle. Compiles the overall estimates. Conducts reviews with management to finalize estimates. Ensure Bid estimates are fully approved and signed off by all. Records all basis of Bid estimate in a formal document. Records all communication, assumptions done at Bid in a manner that same can be easily referred during later date (at execution). Maintains historical records of estimates. Compiles actual performance of repeated works performed in yard and works out benchmarks to be considered for bidding purpose. Compares actuals to estimates and understands reasons for variance. Recommends benchmarks revision where necessary. Takes lead on new initiatives, developments, and suggestions from management to improve.<br>Qualifications, Experience and Skills Qualifications:Diploma or Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 5+ Years in offshore construction involving structures like jackets, topsides, bridges. Understand components, construction methods and processes.<br>Skills: Ability to read Engineering Drawings. Excellent written and spoken communication skills. Well versed in working with Microsoft Office, Power Point, Excel, PDF, and computer applications. Ability to meet challenging deadlines and manage changes (internally or externally imposed).
Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.
Responsible for driving business growth within Qatar’s Oil, Gas & LNG, Petrochemical, and other Industrial sectors for the AMPIS division. The role focuses on proactive business development, client engagement, and techno-commercial support across tendering and contract phases, requiring strong knowledge of Qatar Energy standards, EPC processes, and project-based sales cycles.<br><br>A key aspect of this role includes driving business development activities related to AMPIS’s representation of Yokohama Rubber Co. (Marine Hoses Division), ensuring effective coordination, promotion, and conversion of high-value RFQs and tenders originating from this principal.<br><br>Key Responsibilities<br><br>Identify and perform key functions contributing to business growth and revenue generation:Identify and develop new business opportunities with Qatar Energy, Qatar Energy LNG, major EPC contractors, and key Oil & Gas operators in Qatar. Establish and maintain strong relationships with consultants, procurement teams, project managers, and key decision-makers. Review RFQs, ITTs, and tender documents, and prepare comprehensive techno-commercial proposals. Coordinate with principals, manufacturers, and internal teams to ensure full technical and commercial compliance. Act as the focal point for all business development activities related to Yokohama Rubber Co., including RFQ management, client engagement, technical coordination, and conversion of strategic marine hose opportunities. Ensure adherence to Qatar Energy project-specific standards. Attend pre-bid meetings, clarification meetings, and technical discussions with clients. Support commercial negotiations and contract finalization in coordination with management. Monitor upcoming projects and maintain a robust and active opportunity pipeline. Achieve assigned sales targets and revenue objectives. Prepare periodic sales reports, forecasts, and market intelligence updates. Participate in industry exhibitions and events to support business development initiatives. Maintain continuous engagement with key clients and principals.<br><br>Key Performance Indicators (KPIs)<br><br>Annual revenue growth achievement Tender win ratio Client acquisition and retention rate Gross margin achievement Expansion of approved vendor registrations in Qatar for AMPIS and Principals. Conversion rate and revenue contribution from Yokohama Rubber Co. (Marine Hoses Division) opportunities. Business Development & Market Expansion<br><br>Identify And Pursue New Business Opportunities Within<br><br>Energy Sector (Oil & Gas, LNG, Petrochemical) International Oil & Gas companies operating in Qatar Qatar-based EPIC contractors Industrial and infrastructure sectors Ministries and government entities<br><br>Develop and implement business development plans aligned with AMPIS revenue and Gross Profit targets.<br><br>Promote AMPIS represented principals and product lines through client meetings, presentations, and technical engagement.<br><br>Maintain a strong opportunity pipeline and provide periodic forecasts to management.<br><br>Qatar Market Intelligence & Client Engagement<br><br>Build And Maintain Strategic Relationships With<br><br>Major energy operators and subsidiaries International operators and service companies EPC contractors and subcontractors Industrial clients and public sector entities<br><br>Leverage market intelligence to position AMPIS early in project cycles and vendor approval stages. Track market trends, competitor activities, and procurement strategies.<br><br>Commercial & Tender Coordination Monitor and evaluate relevant tender opportunities aligned with AMPIS scope. Coordinate internally for the preparation of competitive and compliant bids. Support tender submissions, technical clarifications, commercial negotiations, and contract finalization. Ensure all proposals meet approved Gross Profit targets and margin requirements. Principal & OEM Coordination Act as the commercial focal point between AMPIS and international principals, with particular focus on Yokohama Rubber Co. Manage and coordinate all RFQs, tenders, and technical/commercial discussions related to Yokohama marine hose systems, ensuring timely response and alignment for high-value and strategic opportunities. Coordinate technical and commercial inputs for proposal development. Identify and onboard new principles aligned with market demand. Market Intelligence, Governance & Reporting<br><br>Submit Periodic Reports On<br><br>Opportunity pipeline Gross Profit forecast Client engagement status Market observations and competitive analysis<br><br>Maintain compliance with company policies, governance standards, and confidentiality requirements.<br><br>Perform other duties assigned by the AMPIS Manager, BDM, MD / FD within the scope of the role.<br><br>Authority & Accountability<br><br>Authorized to represent AMPIS in client meetings and commercial discussions (as delegated).<br><br>Accountable For<br><br>Development and management of opportunity pipeline Strength and continuity of client relationships Achievement of revenue and Gross Profit targets Compliance with approved margin requirements. Effective management and conversion of all Yokohama-related Tenders/RFQs and strategic opportunities. Responsible for maintaining confidentiality of all commercial and client-related information. Training & Development<br><br>Attend relevant training programs, seminars, and industry events to enhance technical and commercial competencies in line with AMPIS business activities.<br><br>Qualifications & Experience<br><br>Educational Qualification: Bachelor’s degree in Mechanical, Chemical, Electrical, Instrumentation or Industrial Engineering field. Professional Experiences:Minimum 7 to 10 years of proven experience in Business Development or Technical Sales within Qatar Oil & Gas sector. Strong knowledge of Qatar Energy (and its affiliates) vendor registration and tendering procedures. Experience dealing with major EPC contractors operating in Qatar. Strong knowledge of Oil & Gas equipment, Piping systems, valves, compressors, pumps etc Proven track record of achieving sales targets in Qatar market. Proven experience in Energy sector marketing and client engagement. Established professional network within:Major energy operators International oil & gas companies EPC contractors Industrial and government entities Experience in marine hose systems, offshore loading systems, or working with international OEMs such as Yokohama Rubber Co. is highly preferred.<br><br>Licenses/Certifications:Valid Qatar Driving License. Valid Engineering Certification in Mechanical, Industrial, Electrical / Instrumentation or Chemical Engineering. Competencies:Strong negotiation and commercial acumen. Techno-commercial evaluation skills. Excellent communication and presentation skills. Market intelligence and project tracking capability. Customer/Client relationship management capability. Strategic planning, presentation and analytical skills. Strong understanding of Qatar energy and industrial market landscape. Knowledge of EPC project lifecycle and procurement processes. Familiarity with tendering procedures of major Qatar clients. Commercial acumen with focus on Gross Profit and margin optimization. Market intelligence analyzation and reporting skills. Excellent written and verbal communication. Ability to coordinate effectively with cross-functional teams. Professional integrity and business ethics. Language: English (Arabic advantage).
Job Summary<br><br>The Senior QA/QC Engineer is responsible for leading and overseeing Quality Assurance and Quality Control activities across the fertilizer complex to ensure that plant assets, materials, equipment, and construction activities comply with applicable international standards, company specifications, and regulatory requirements throughout their lifecycle. The role provides technical assurance for procurement, fabrication, welding, construction, inspection, testing, and material quality, while promoting a proactive "Quality at Source" culture to enhance asset reliability, mechanical integrity, and process safety.<br><br>The position also maintains compliance with ISO/IEC 17020 requirements by implementing and continually improving the Inspection Body Management System, supporting accreditation, and ensuring effective quality management practices across the Asset Integrity function.<br><br>Key Accountabilities<br><br>Lead and manage Quality Assurance and Quality Control (QA/QC) activities across all QAFCO plants and facilities to ensure compliance with company specifications, international standards, and statutory requirements. Ensure quality assurance throughout the asset lifecycle by participating in vendor qualification, reviewing Inspection and Test Plans (ITPs), quality documentation, manufacturing procedures, and witnessing shop and site inspections. Manage the qualification of vendors in co-operation with different stake holders like Material management , Mechanical, Electrical , Instrumentation sections etc. Oversee QA/QC activities for fabrication, construction, installation, repairs, and maintenance of static equipment and piping, ensuring compliance with approved procedures, codes, standards, and contractual requirements. Manage welding quality assurance by verifying Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), welder qualifications, and non-destructive examination (NDE) requirements for fabrication and repair activities. Review and approve welding book submitted by contractors. Coordinate and perform inspections with third-party inspection agencies, contractors, and vendors, including factory acceptance tests (FAT), site inspections according to ITP steps and lifting equipment certification. Ensure effective quality control of incoming materials, equipment, and spare parts by reviewing material certificates, verifying compliance with specifications, maintaining material traceability, and reporting non-conformities. Expertise needed to take decisions, if any deviations from the specification and Mock test requirement, etc. Monitor the repair and integrity of pressure equipment, piping, and static equipment in accordance with applicable codes and standards, including ASME PCC-2, to restore and maintain mechanical integrity. Manage inspection, testing, certification, and performance evaluation of pressure relief devices, and develop optimized inspection scopes using Risk-Based Inspection (RBI) methodologies. Maintain compliance with statutory and regulatory requirements, including Radiation Protection licensing and other applicable Ministry requirements. Maintain, calibrate, and control inspection instruments, tools, and equipment to ensure their accuracy, availability, and compliance with quality requirements. Develop, maintain, and continuously improve QA/QC procedures, inspection documentation, records, and electronic management systems to support effective asset integrity management. Implement, maintain, and continuously improve the ISO/IEC 17020 Inspection Body Management System, support accreditation activities, conduct internal audits, and ensure effective implementation of all applicable ISO/IEC 17020 requirements. Collaborate with Operations, Maintenance, Projects, Procurement, Supply Chain, and Asset Integrity teams to promote a "Quality at Source" culture, enhance process safety and mechanical integrity, and drive continuous improvement initiatives. Provide technical expertise in materials engineering, selection, corrosion, welding, inspection techniques, and damage mechanisms, while supporting engineering studies, troubleshooting, and quality improvement initiatives. Shall be able to review metallography and preparation of replica. Participate in Root Cause Analysis for the failures. Train, mentor, and develop inspection personnel and trainees through on-the-job coaching, knowledge sharing, and technical guidance to strengthen organizational competency. Ensure full compliance with QAFCO Occupational Health, Safety, Environment and Quality (OHSEQ) requirements, company policies, and all applicable regulatory and process safety standards.<br><br>Desired Candidate Profile<br><br>Bachelor’s degree in engineering in Mechanical/Metallurgy, graduated from a recognized university. Minimum of 10 - 15 years’ relevant functional experience within the Fertilizer, Petrochemicals or Oil & Gas Industry. Possess relevant professional certification such as ASME Authorized inspector Welding Inspection Cert. (CSWIP 3.2, AWS, or equivalent), etc. API 510, 570, API 653, API580 Inservice
الغرض الأساسي من الوظيفة<br><br>العمل كمهندس مدني/إنشائي أول لمشروع محطة طاقة وتحلية مياه، وتوفير الضمان الفني للتصميمات المدنية والإنشائية الخاصة بالمقاول من البداية وحتى الانتهاء. يتطلب هذا الدور قدرة فنية مستقلة لإدارة ومراجعة والتحقق من واعتماد جميع مخرجات الهندسة المدنية والإنشائية المرتبطة بمرافق توليد الطاقة وتحلية المياه، بما في ذلك البنية التحتية البرية والبحرية المعقدة.<br><br>يجب على المهندس المدني/الإنشائي الأول التأكد من ملاءمة التصميمات المدنية والإنشائية لتطوير الموقع، وأساسات المعدات الديناميكية، وهياكل احتجاز مياه الشرب الكبيرة جدًا سابقة الإجهاد، وأعمال الصرف والأعمال الترابية واسعة النطاق، ومحطات التبديل والساحات الكهربائية. مطلوب معرفة تفصيلية بتصميم المرافق المذكورة أعلاه، بما في ذلك القدرة على تطوير نطاقات العمل وتوفير الضمان الفني للعناصر الهندسية.<br><br>الخبرات والمهارات المطلوبة<br><br>خبرة لا تقل عن 15 عامًا في مجال الدراسات العليا ذات الصلة، منها ما لا يقل عن 10 سنوات تتعلق بمحطات الطاقة أو النفط والغاز أو المشاريع الصناعية الثقيلة الأخرى. خبرة في تطوير مواقع المحطات، بما في ذلك الطرق، والأعمال الترابية، وأنظمة الصرف المعقدة، ومحطات الطاقة على نطاق المرافق، بما في ذلك أساسات التوربينات الثقيلة والمولدات المرتبطة بالمرافق الصناعية الكبرى. خبرة في تصميم هياكل احتجاز مياه الشرب الكبيرة سابقة الإجهاد، وخزانات مياه البحر الكبيرة وأحواض الترسيب. خبرة في تصميم البنية التحتية المدنية القريبة من الشاطئ والبحرية، بما في ذلك أنظمة سحب مياه البحر وتصريف المياه المالحة، والأعمال المدنية القريبة من الشاطئ، وبنية الحماية الساحلية. خبرة في تطوير نطاق العمل للتحقيقات الجيوتقنية والطبوغرافية وتفسير تقارير النتائج. خبرة في تقديم الدعم الفني خلال مرحلة بناء المشاريع الضخمة، بما في ذلك حل مشكلات الهندسة المدنية والإنشائية المعقدة أثناء التنفيذ. خبرة عبر مراحل المفهوم/الجدوى، والتصميم الهندسي الأولي (FEED)، والهندسة والمشتريات والبناء (EPIC). الإلمام بالأكواد والمعايير المدنية/الإنشائية الأمريكية والأوروبية. قدرة فنية قوية، مع القدرة على حل المشكلات الهندسية المعقدة بشكل مستقل ودون الاعتماد على تدخل طرف ثالث. قدرة مثبتة على إدارة الوقت والتكلفة والجودة في المشاريع الهندسية ضمن بيئة مشاريع متعددة. مهارات اتصال وعرض ممتازة مع إجادة اللغة الإنجليزية. خبرة مثبتة في العمل ضمن فرق متعددة الثقافات.<br><br>المؤهلات التعليمية<br><br>درجة البكالوريوس في الهندسة المدنية أو الإنشائية، مع الحصول على صفة مهندس معتمد أو درجة الدراسات العليا في مجال ذي صلة.
الغرض الأساسي من الوظيفة<br><br>إجراء دراسات هندسة المكامن لحقل "إد الشرقي" البحري الذي تديره قطر للطاقة لتحسين خطط تطوير الحقل، بالإضافة إلى تحليل بيانات أداء المكمن والبئر، وتحليل منحنى الانخفاض، وتحليل الضغط العابر، وتوازن المواد. إعداد برامج مراقبة المكامن وتنفيذ أنشطة إدارة المكامن. إعداد خطط تطوير مفصلة/متكاملة لموارد الهيدروكربون غير المطورة والمشاركة في فرق دراسة المكامن متعددة التخصصات.<br><br>المسؤوليات الرئيسية<br><br>إجراء تفسير متقدم لاختبارات الضغط العابر (PTA) للآبار الأفقية مثل فك الالتفاف (deconvolution)، والمكامن متعددة الطبقات، وأنظمة المسامية المزدوجة، باستخدام مجموعات بيانات تراكم وانخفاض ضغط غير مكتملة أو تحتوي على ضجيج. بناء/تحديث نماذج مكامن ديناميكية (الزيت الأسود والتركيبية) لتخطيط تطوير الحقل. إجراء المراجعة السنوية للاحتياطيات وتوليد توقعات الإنتاج/الحقن طويلة المدى لتخطيط الأعمال وجدول الحفر/إعادة صيانة الآبار. المساهمة في دمج مدخلات هندسة المكامن في الأنشطة قصيرة المدى (مشاريع حفر/استبدال الآبار، ومشاريع صيانة الآبار، وعمليات الحفر/الصيانة)، ومتوسطة المدى (إدارة فراغات المكمن)، وطويلة المدى (تطوير الحقل وتحسين قيمة الأصول). تحديد طبقة (طبقات) المكمن المستهدفة وتحديد نقاط التلامس بين البئر والمكمن لمشاريع حفر الآبار العمودية/المائلة/الأفقية الجديدة/البديلة في المكامن غير المتجانسة متعددة الطبقات لتحسين تطوير الحقل. المساهمة في مقترحات/توقعات الآبار. تطوير وإعداد تقارير هندسة المكامن بعد الحفر، بما في ذلك دمج بيانات هندسة المكامن المفسرة مع التقييمات الجيولوجية والفيزيائية. المشاركة في إعداد خطط تطوير متكاملة ومفصلة لموارد الهيدروكربون غير المطورة. المساهمة في مجال هندسة المكامن في المراجعات السنوية للحقول. التوصية بالحصول على بيانات هندسة المكامن وصيانة قواعد بيانات هندسة المكامن، بما في ذلك روابط البيانات في الوقت الفعلي. مراقبة امتثال المقاولين لعمليات الحصول على بيانات هندسة المكامن. توفير التدريب أثناء العمل والتوجيه والتطوير للموظفين القطريين.<br><br>الخبرة والمهارات المطلوبة<br><br>السياق / السمات الخاصة / التحديات<br><br>خبرة عمل لا تقل عن 20 عاماً في أنشطة هندسة المكامن. معرفة متقدمة بتفسير اختبارات الضغط العابر (PTA) للآبار الأفقية مثل فك الالتفاف، والمكامن متعددة الطبقات، وأنظمة المسامية/النفاذية المزدوجة. كفاءة قوية في بناء نماذج محاكاة المكامن الرقمية (الزيت الأسود والتركيبية)، وتهيئة النموذج، ومطابقة التاريخ، وتشغيل الحساسيات والتنبؤات. كفاءة قوية في تصميم وتفسير اختبارات الآبار العابرة، ونمذجة توازن المواد، والتنبؤ بالأداء. يجب أن يمتلك خبرة في الحقول الكربونية الناضجة. كفاءة قوية في تحليل بيانات (PVT) و(SCAL). يجب أن يكون على دراية بتقييم وتصنيف وتسجيل الاحتياطيات (معايير SPE PRMS أو SEC). يجب أن يكون قادراً على التواصل بفعالية مع الزملاء، والموظفين الأقل خبرة، وموظفي الحقل، والإدارة. يجب أن يمتلك مهارات عمل جماعي قوية. تُعد الخبرة في العمل في بيئة متعددة الثقافات ومتكاملة ميزة إضافية. يجب أن يجيد اللغة الإنجليزية تحدثاً وكتابة بطلاقة. درجة متقدمة في الهندسة (يفضل هندسة البترول) أو العلوم التطبيقية. خبرة في العمل في حقول النفط/الغاز الناضجة. يفضل امتلاك خبرة في أخذ عينات سوائل المكامن، ونمذجة خصائص السوائل، والتحليل الروتيني والخاص لللب الصخري. يفضل امتلاك معرفة بتحليل عدم اليقين وتقييم/إدارة المخاطر.<br><br>المؤهلات التعليمية<br><br>درجة البكالوريوس كحد أدنى في الهندسة (يفضل هندسة البترول) أو العلوم التطبيقية. تفسير اختبارات الآبار باستخدام Kappa-Saphir، ومحاكاة Eclipse 100/300 وPetrel RE، ونمذجة خصائص السوائل باستخدام PVTi وPVTSim، وتوازن المواد باستخدام MBAL، ومراقبة المكامن باستخدام OFM، و@Risk/Crystal Ball.
الغرض الأساسي من الوظيفة<br><br>العمل كمهندس مدني/إنشائي أول لمشروع محطة طاقة وتحلية مياه، مع تقديم ضمان فني على التصميم المدني والإنشائي للمقاول من البداية وحتى الانتهاء. يتطلب الدور قدرة فنية مستقلة لإدارة ومراجعة والتحقق من واعتماد جميع مخرجات الهندسة المدنية والإنشائية المرتبطة بمرفق توليد الطاقة وتحلية المياه، بما في ذلك البنية التحتية البرية والبحرية المعقدة.<br><br>يجب على المهندس المدني/الإنشائي الأول ضمان ملاءمة التصاميم المدنية والإنشائية لتطوير الموقع، وأساسات المعدات الديناميكية، وهياكل احتجاز مياه الشرب سابقة الإجهاد كبيرة الحجم، وأعمال الصرف والأعمال الترابية واسعة النطاق، ومحطات التبديل والساحات الكهربائية. مطلوب معرفة تفصيلية بالتصميم للمرافق المذكورة أعلاه، بما في ذلك القدرة على تطوير نطاقات العمل وتقديم ضمان فني للعناصر الهندسية.<br><br>الخبرة والمهارات المطلوبة<br><br>خبرة لا تقل عن 15 عاماً بعد التخرج في مجال ذي صلة، منها 10 سنوات على الأقل مرتبطة بمحطات الطاقة أو النفط والغاز أو مشاريع صناعية ثقيلة أخرى. خبرة في تطوير مواقع المصانع، بما في ذلك الطرق والأعمال الترابية وأنظمة الصرف المعقدة ومحطات الطاقة على نطاق المرافق، بما في ذلك أساسات التوربينات والمولدات الثقيلة المرتبطة بالمرافق الصناعية الكبرى. خبرة في تصميم هياكل احتجاز مياه الشرب سابقة الإجهاد الكبيرة، وخزانات مياه البحر الكبيرة وأحواض الترسيب. خبرة في تصميم البنية التحتية المدنية القريبة من الشاطئ والبحرية، بما في ذلك أنظمة سحب مياه البحر وتصريف المحلول الملحي، والأعمال المدنية القريبة من الشاطئ، وبنية الحماية الساحلية. خبرة في تطوير نطاق العمل للتحقيقات الجيوتقنية والطبوغرافية وتفسير تقارير النتائج. خبرة في تقديم الدعم الفني خلال مرحلة إنشاء المشاريع الكبرى، بما في ذلك حل القضايا الهندسية المدنية والإنشائية المعقدة أثناء التنفيذ. خبرة عبر مراحل المفهوم/الجدوى، والتصميم الهندسي الأولي (FEED)، والهندسة والمشتريات والبناء (EPIC). الإلمام بالأكواد والمعايير المدنية/الإنشائية الأمريكية والأوروبية. قدرة فنية قوية مع القدرة على حل المشكلات الهندسية المعقدة بشكل مستقل دون الاعتماد على تدخل طرف ثالث. قدرة مثبتة على إدارة الوقت والتكلفة والجودة في المشاريع الهندسية ضمن بيئة مشاريع متعددة. مهارات تواصل وعرض ممتازة مع إجادة اللغة الإنجليزية. خبرة مثبتة في العمل ضمن فرق متعددة الثقافات.<br><br>المؤهلات التعليمية<br><br>درجة البكالوريوس في الهندسة المدنية أو الإنشائية مع حالة مهندس معتمد (Chartered Engineer) أو درجة دراسات عليا في مجال ذي صلة.
وصف الوظيفة<br><br>تتاح لدى شركة Wood فرصة عمل لشغل منصب كبير مهندسي الإنشاءات المدنية للانضمام إلى فريقنا في قطر على أساس طويل الأمد. يعد هذا الدور أساسياً ضمن مكتب Wood في الدوحة لتنفيذ أعمال عبر دراسات المفهوم، والتصميم الهندسي الأولي (FEED)، وعقود الهندسة والتوريد والبناء (EPC)، وإدارة المشاريع (PMC).<br><br>المسؤوليات<br><br>سيكون كبير مهندسي الإنشاءات المدنية مسؤولاً عن تنفيذ أعمال المشروع وفقاً لخطة تنفيذ المشروع، بما في ذلك إجراءات Wood و/أو إجراءات المشروع المتعلقة بالسلامة ومراقبة الجودة، ضمن أهداف ساعات العمل والتكلفة والجدول الزمني للمشروع.<br><br>تصميم المستقبل. تغيير العالم<br><br>انعكاساً للتركيز السوقي للمكتب في كل من المشاريع القائمة (Brownfield) والمشاريع الجديدة (Greenfield)، نسعى لتوظيف أفراد ذوي مهارات متعددة، وخاصة أولئك الذين لديهم خبرة في:<br><br>النفط والغاز البري<br><br>النفط والغاز البحري<br><br>ما يمكننا تقديمه<br><br> مشاريع هادفة ومثيرة للاهتمام يتم تقديمها لقادة الصناعة في قطاعات النفط والغاز والطاقة الناشئة الالتزام بالتنوع والشمول؛ نحن منظمة ملتزمة بنشاط بالتنوع والشمول عبر أعمالنا مع شبكات موظفين مكرسة لمنح جميع الموظفين صوتاً راتب تنافسي مع مراجعات دورية للرواتب لضمان المكافأة بالمستوى الصحيح بما يتماشى مع السوق تأمين على الحياة؛ يوفر دفع ما يعادل راتب أساسي لمدة شهرين (بحد أقصى مليون ريال قطري) عند الوفاة مكافأة نهاية الخدمة؛ تماشياً مع قانون العمل القطري، يحق للموظفين عند إكمال عام واحد من الخدمة الحصول على مكافأة نهاية خدمة تعادل أجر ثلاثة أسابيع عن كل سنة خدمة. التأمين الطبي: يضمن توفر تغطية (بحد أقصى 250,000 ريال قطري للشخص الواحد سنوياً) في حال احتجت إلى علاج. تغطية الحالات الموجودة مسبقاً و/أو المزمنة تصل إلى 10,000 ريال قطري. برنامج مساعدة الموظفين: يتيح لك الشعور بالراحة مع معرفة أنه يمكنك أنت أو أفراد أسرتك المباشرين مناقشة أي قضايا عمل أو قضايا شخصية هي جزء لا مفر منه من الحياة بشكل سري. يساعد البرنامج في دعم رفاهيتك العقلية والجسدية والاجتماعية والمالية. عضويات مهنية؛ تكلفة عضوية مهنية واحدة أو تسجيل أو اشتراك أو شهادة و/أو ترخيص سنوياً لجميع موظفي Wood النشطين. يجب أن تكون العضوية ذات صلة بالدور الذي تشغله حالياً أو جزءاً من خطة تطوير. يجب المطالبة بالاسترداد عبر نظام إجراءات النفقات، مع تقديم أدلة داعمة. اتصالات عالمية: انضم إلى خبراء حول العالم في طليعة صناعتنا، والذين يشكلون معايير مهنتنا.<br><br>المسؤوليات النموذجية<br><br> إعداد ومراجعة وتحمل المسؤولية عن دقة الحسابات التفصيلية، وبيانات الهندسة المدنية والرسومات لتحديد المتطلبات الهندسية المدنية لمشاريعنا امتلاك خبرة قوية في تصميم وتحليل المباني والهياكل والأساسات والبنية التحتية والأعمال المدنية الجديدة والقائمة، بما في ذلك تصميم الصرف الصحي وتصميم الطرق والرصف الموجود عادة في مرافق النفط والغاز. امتلاك خبرة جيدة في تصميم الهياكل الخرسانية والفولاذية بما في ذلك حوامل الأنابيب، والمباني، والهياكل التكنولوجية، وهياكل دعم المعدات، وجسور الأنابيب، ودعامات الأنابيب، ومساند الأنابيب، إلخ. امتلاك خبرة جيدة في تصميم وفحص أنواع مختلفة من الأساسات مثل الأساسات المنفصلة، والمشتركة، والحصيرية، إلخ، بما في ذلك الأساسات الديناميكية، وأساسات المعدات، وأساسات الضاغط، وأساسات المضخات، والحفر/الهياكل تحت الأرض، إلخ. امتلاك خبرة جيدة في العمل ومستوى المراجعة للتحقق من كفاية الهياكل والأساسات القائمة بما في ذلك حوامل الأنابيب، والمباني، وجسور الأنابيب، والهياكل التكنولوجية، وأساسات المعدات، إلخ. يجب أن يكون قد نفذ مشاريع حديثة في بيئة النمذجة ثلاثية الأبعاد Intergraph Smart Plant الإشراف على مهندسي الإنشاءات المدنية الأقل خبرة، وحيثما دعت الحاجة، العمل كمدير خط لمهندسي الإنشاءات المدنية داخل مكتب قطر. حسب الحاجة، القيام بدور المهندس الرئيسي بما في ذلك تقدير وتخطيط العمل بالإضافة إلى تقارير التقدم المحرز. دعم التوظيف والتدريب والتطوير للأفراد المدنيين اتباع معايير وإجراءات الشركة للجدولة والميزانية حسب توجيهات مهندس الإنشاءات المدنية الرئيسي البقاء على اطلاع بأحدث التطورات التقنية في مجالات خبرتك إظهار وتوفير وتطوير حلول تقنية مناسبة لقضايا مشاريع محددة ضمان تسليم أهداف المشروع والعملاء الصعبة باستخدام المعرفة التقنية السليمة ومهارات اتخاذ القرار الإلمام ببرامج الهندسة مثل STAAD-Pro، Foundation 3D، Mat 3D، إلخ - كمستخدم ومراجع. اتباع نهج استباقي للتطوير الشخصي والمهني ضمان اتباع إجراءات الصحة والسلامة والبيئة والجودة الخاصة بشركة Wood والعميل وتحقيق مستوى عالٍ من السلامة في جميع الأعمال المرتبطة إظهار تقدير للمخاطر التجارية والتقنية، وإدارة هذه المخاطر بشكل مناسب ضمن عملك الخاص وتسليط الضوء على أي قضايا مهمة لمهندس الإنشاءات المدنية الرئيسي/مدير الهندسة. البحث عن ودعم فرص التحسين للقسم والمشروع والمساهمة في تطوير الحلول.<br><br>المؤهلات<br><br>ما الذي يجعلك متميزاً؟<br><br>في Wood، نحن ملتزمون بتكافؤ الفرص ونرحب بجميع الأفراد الموهوبين للنظر في الانضمام إلى فريقنا. لذا، حتى إذا كنت لا تطابق كل بيان أدناه ولكنك تشعر أن لديك بعض الخبرة أو المعرفة أو المهارات اللازمة لهذا الدور، فنحن نشجعك على التقديم. سيتطلب الأمر منا جميعاً العمل معاً لتقديم حلول لأكثر تحديات العالم أهمية.<br><br>المؤهلات<br><br> درجة علمية في الهندسة المدنية أو ما يعادلها مع ما لا يقل عن 15 عاماً من الخبرة ذات الصلة مسجل في سجل المهندسين بدولة قطر، فئة "أ" كمتطلب إلزامي إذا لم تكن مسجلاً في سجل المهندسين بدولة قطر، فيجب أن يكون المرشحون مهندسين معتمدين (Chartered Engineer) مهارات هندسة مدنية أساسية مثبتة، بما في ذلك خبرة في التصميم ويفضل أن تكون في قطاع النفط والغاز خبرة في العمل في مجموعة متنوعة من المشاريع والمراحل البرية، بما في ذلك المشاريع الجديدة والقائمة، من مرحلة ما قبل التصميم الهندسي الأولي (Pre-FEED) حتى عقود الهندسة والتوريد والبناء (EPC) فرد يتمتع بالتحفيز الذاتي والاستباقية مع دافع عالٍ للإنجاز والمبادرة، ومهارات تواصل شفهية وكتابية ممتازة ووعي تنظيمي جيد القدرة على التأثير في الزملاء إظهار التركيز على العملاء والقدرة على الاستجابة لاحتياجات العملاء مع تحقيق أهداف المشروع وأهداف الشركة إظهار مهارات تحليلية وابتكارية لإدارة التكنولوجيا الجديدة<br><br>نبذة عنا<br><br>تعد Wood شركة رائدة عالمياً في الاستشارات والهندسة والعمليات لقطاعات الطاقة والمواد. مع 33,000 موظف في حوالي 50 دولة، تدعم Wood العملاء عبر دورة حياة الأصول الكاملة، وتقدم نتائج آمنة وقابلة للتنبؤ بينما تمكن من عمليات مرنة ومستقبل منخفض الكربون. تشكل Wood ركيزة الطاقة والمواد في Sidara - وهي شراكة عالمية توحد شركات رائدة متعددة التخصصات في الهندسة والتصميم وإدارة المشاريع. www.woodgroup.com<br><br>بيان التنوع<br><br>نحن صاحب عمل يلتزم بتكافؤ الفرص ويدرك قيمة القوى العاملة المتنوعة. سيحصل جميع المتقدمين المؤهلين بشكل مناسب على اعتبار للتوظيف على أساس معايير موضوعية وبغض النظر عما يلي (وهي قائمة غير شاملة): العرق، اللون، العمر، الدين، الجنس، الأصل القومي، الإعاقة، التوجه الجنسي، الهوية الجنسية، حالة المحارب القديم المحمية، أو خصائص أخرى وفقاً للقوانين الحاكمة ذات الصلة.
The QAQC Engineer is responsible for establishing, implementing, and maintaining quality assurance and quality control systems across all carpentry, joinery, and fit-out manufacturing activities. The role ensures that all products, materials, and workmanship comply with approved drawings, specifications, client requirements, applicable standards, and company quality procedures.<br><br>Key Responsibilities<br><br> Quality Assurance (QA) Responsibilities Develop, implement, and maintain Quality Management Systems (QMS) in line with ISO 9001:2015 or company standards. Prepare and update Quality Plans, Method Statements, Inspection and Test Plans (ITPs) for joinery and fit-out works. Ensure QA procedures cover all stages of manufacturing, including material procurement, fabrication, finishing, packing, and delivery. Coordinate internal audits and assist during external audits by clients, consultants, or certification bodies. Review project specifications, drawings, BOQs, and client requirements to identify quality requirements and risks. Establish quality objectives and monitor performance through KPIs and quality reports. Promote a quality-driven culture across production and project teams. Quality Control (QC) Responsibilities Conduct incoming material inspections for timber, boards, veneers, laminates, hardware, finishes, adhesives, and accessories. Verify compliance of materials with approved submittals, samples, and technical data sheets. Perform in-process inspections during cutting, machining, assembly, veneering, laminating, finishing, polishing, and pre-installation mock-ups. Inspect final products to ensure compliance with approved shop drawings, samples, tolerances, and finish quality. Monitor workmanship quality for factory-made and site-installed joinery and fit-out items. Ensure proper calibration and use of measuring and inspection tools. Identify non-conformities and issue NCRs (Non-Conformance Reports) where required. Follow up on corrective and preventive actions (CAPA) and verify their effectiveness. Project & Site Coordination Liaise with Project Managers, Production Managers, Factory Supervisors, and Site Engineers on quality matters. Coordinate inspections with consultants, clients, and third-party inspectors. Support factory acceptance tests (FAT) and site inspections prior to delivery or installation. Ensure quality compliance during site installation, rectification works, and snag clearance. Assist in preparation of handover documents, warranties, and quality dossiers when required. Documentation & Reporting Maintain accurate records of inspections, test results, approvals, NCRs, and corrective actions. Prepare Inspection Requests (IRs) and ensure timely approvals. Compile quality reports, dashboards, and monthly summaries for management review. Control quality-related documents and ensure only approved revisions are in use. Maintain records for traceability of materials and workmanship. Compliance & Standards Ensure compliance with relevant standards (e.g., ISO 9001, ASTM, BS, EN, local authority requirements). Ensure products meet fire rating, environmental, sustainability, and safety requirements where applicable. Monitor compliance with health, safety, and environmental requirements related to materials and finishes (e.g., VOC, fire-retardant treatments). Continuous Improvement Analyze recurring defects and quality issues to identify root causes. Propose improvements to manufacturing processes, materials, and inspection methods. Support training of production and site teams on quality requirements, workmanship standards, and best practices. Participate in lessons-learned sessions after project completion.<br><br>Qualifications & Experience<br><br>Education<br><br>Bachelor’s Degree or Diploma in Civil Engineering, Wood Technology, Industrial Engineering, or related field.<br><br>Experience<br><br>Minimum 7–10 years of experience in QAQC within carpentry, joinery, or fit-out manufacturing. Proven experience in factory and site quality control for bespoke joinery and interior fit-out projects.<br><br>Skills & Competencies<br><br>Strong knowledge of carpentry, joinery materials, finishes, and fabrication processes. Ability to read and interpret shop drawings, details, specifications, and BOQs. Familiarity with ISO 9001 and quality auditing principles. Attention to detail and strong analytical skills. Excellent documentation and report-writing skills. Good communication and coordination skills with multidisciplinary teams. Proficient in MS Office and basic quality management software/tools.<br><br>Working Conditions<br><br>Based in manufacturing facility with regular visits to project sites. May require overtime or extended hours during project deadlines. Exposure to factory environments, woodworking machinery, and construction sites.
The QAQC Engineer is responsible for establishing, implementing, and maintaining quality assurance and quality control systems across all carpentry, joinery, and fit-out manufacturing activities. The role ensures that all products, materials, and workmanship comply with approved drawings, specifications, client requirements, applicable standards, and company quality procedures.<br><br>Key Responsibilities<br><br> Quality Assurance (QA) Responsibilities Develop, implement, and maintain Quality Management Systems (QMS) in line with ISO 9001:2015 or company standards. Prepare and update Quality Plans, Method Statements, Inspection and Test Plans (ITPs) for joinery and fit-out works. Ensure QA procedures cover all stages of manufacturing, including material procurement, fabrication, finishing, packing, and delivery. Coordinate internal audits and assist during external audits by clients, consultants, or certification bodies. Review project specifications, drawings, BOQs, and client requirements to identify quality requirements and risks. Establish quality objectives and monitor performance through KPIs and quality reports. Promote a quality-driven culture across production and project teams. Quality Control (QC) Responsibilities Conduct incoming material inspections for timber, boards, veneers, laminates, hardware, finishes, adhesives, and accessories. Verify compliance of materials with approved submittals, samples, and technical data sheets. Perform in-process inspections during cutting, machining, assembly, veneering, laminating, finishing, polishing, and pre-installation mock-ups. Inspect final products to ensure compliance with approved shop drawings, samples, tolerances, and finish quality. Monitor workmanship quality for factory-made and site-installed joinery and fit-out items. Ensure proper calibration and use of measuring and inspection tools. Identify non-conformities and issue NCRs (Non-Conformance Reports) where required. Follow up on corrective and preventive actions (CAPA) and verify their effectiveness. Project & Site Coordination Liaise with Project Managers, Production Managers, Factory Supervisors, and Site Engineers on quality matters. Coordinate inspections with consultants, clients, and third-party inspectors. Support factory acceptance tests (FAT) and site inspections prior to delivery or installation. Ensure quality compliance during site installation, rectification works, and snag clearance. Assist in preparation of handover documents, warranties, and quality dossiers when required. Documentation & Reporting Maintain accurate records of inspections, test results, approvals, NCRs, and corrective actions. Prepare Inspection Requests (IRs) and ensure timely approvals. Compile quality reports, dashboards, and monthly summaries for management review. Control quality-related documents and ensure only approved revisions are in use. Maintain records for traceability of materials and workmanship. Compliance & Standards Ensure compliance with relevant standards (e.g., ISO 9001, ASTM, BS, EN, local authority requirements). Ensure products meet fire rating, environmental, sustainability, and safety requirements where applicable. Monitor compliance with health, safety, and environmental requirements related to materials and finishes (e.g., VOC, fire-retardant treatments). Continuous Improvement Analyze recurring defects and quality issues to identify root causes. Propose improvements to manufacturing processes, materials, and inspection methods. Support training of production and site teams on quality requirements, workmanship standards, and best practices. Participate in lessons-learned sessions after project completion.<br><br>Qualifications & Experience<br><br>Education<br><br>Bachelor’s Degree or Diploma in Civil Engineering, Wood Technology, Industrial Engineering, or related field.<br><br>Experience<br><br>Minimum 7–10 years of experience in QAQC within carpentry, joinery, or fit-out manufacturing. Proven experience in factory and site quality control for bespoke joinery and interior fit-out projects.<br><br>Skills & Competencies<br><br>Strong knowledge of carpentry, joinery materials, finishes, and fabrication processes. Ability to read and interpret shop drawings, details, specifications, and BOQs. Familiarity with ISO 9001 and quality auditing principles. Attention to detail and strong analytical skills. Excellent documentation and report-writing skills. Good communication and coordination skills with multidisciplinary teams. Proficient in MS Office and basic quality management software/tools.<br><br>Working Conditions<br><br>Based in manufacturing facility with regular visits to project sites. May require overtime or extended hours during project deadlines. Exposure to factory environments, woodworking machinery, and construction sites.
Greetings from Linnk Group<br>Job Summary We are seeking a proactive Onsite IT Support Engineer to deliver high-quality Level 1 and Level 2 technical support within an executive office environment. The role involves supporting end-users, including senior leadership, ensuring smooth operation of workplace technology, and providing both onsite and remote support across international offices.<br>Job Title: Onsite IT Support Engineer – Executive Support (L1/L2) Location: Doha, Qatar Contract: Yearly Renewable<br>Key Responsibilities Provide hands-on support for Windows, mac OS, Microsoft 365, and mobile devices (i OS/Android). Troubleshoot issues related to Outlook, Teams, One Drive, Share Point, authentication, and MFA. Deliver proactive floor-walking support for meeting rooms, Teams Rooms, video conferencing, printers, and WiFi. Support users remotely across global offices. Assist with Microsoft 365 administration, including Entra ID (Azure AD), Intune, and licensing. Perform basic network troubleshooting (WiFi, VLAN, DHCP, DNS) and escalate when required. Manage device lifecycle activities such as provisioning, software installation, and replacements.<br>Technical Requirements3–5 years of experience in IT support or system administration. Strong knowledge of Microsoft 365, Entra ID (Azure AD), and Microsoft Intune. Experience with Windows 10/11, mac OS, and mobile device support. Good understanding of networking fundamentals (WiFi, VLAN, DHCP, DNS).<br>Certifications (Preferred) Microsoft MD-102 (Endpoint Administrator) Microsoft MS-102 (Microsoft 365 Administrator) Microsoft MS-900 (Microsoft 365 Fundamentals)<br>If you're ready to make a difference and contribute your expertise to our team, we want to hear from you! Please send your updated resume and the following details to Mohammed. Sabah@linnk.com
<h2 class="h5">الوصف الوظيفي</h2><div class="t-break" data-jb-field="description"><ul><li>مسؤول عن أعمال ما قبل التشغيل التجريبي، والتشغيل التجريبي، وبدء تشغيل المرافق في المشاريع وفقًا للإجراءات والإرشادات المعمول بها.</li><li>تحديد وتعبئة وإدارة فريق عمل يغطي إعداد وتنفيذ عملية التشغيل التجريبي.</li></ul><br><ul><li>إدارة إعداد إجراءات ما قبل التشغيل التجريبي/التشغيل التجريبي الخاصة بالمشروع وأدوات إعداد التقارير (بما في ذلك قاعدة البيانات الفنية عند الاقتضاء، والتخطيط، والتحكم في قائمة الملاحظات).</li><li>إدارة تنفيذ التشغيل التجريبي لتحقيق أقصى قدر من الإنتاجية، وتقليل التكاليف، وتحقيق التسليم السلس.</li><li>الإشراف على تقديم تقارير تنفيذ التشغيل التجريبي لضمان تسجيل وجمع جميع المعلومات الفنية والتعاقدية بشكل صحيح وتوفيرها للتفتيش/الرجوع إليها وفقًا للوائح والإجراءات/السياسات.</li><li>الإشراف على الجدول الزمني للتشغيل التجريبي للوصول إلى تاريخ الانتهاء المخطط له.</li><li>التنسيق مع كيانات المشروع الأخرى/المرافق الحالية.</li><li>ضمان تنفيذ عملية التشغيل التجريبي وتسليم المشروع وفقًا للإجراءات والإرشادات.</li><li>تعزيز سلوكيات الصحة والسلامة والبيئة (HSE) ضمن أنشطة التشغيل التجريبي والتحقق من تطبيق إجراءات الصحة والسلامة والبيئة من قبل فريق التشغيل التجريبي.</li><li>مراجعة وتقديم المدخلات لنطاق عمل المشروع.</li><li>تحسين إجراءات التشغيل التجريبي، والمبادرة والمساهمة في توحيد مخرجات التشغيل التجريبي، وتطوير إستراتيجية لتقليل التشغيل التجريبي البحري وتقليل الوقت الضائع الناتج عن التداخلات.</li><li>تطوير إستراتيجية التشغيل التجريبي وتقديم المدخلات لخطة تنفيذ المشروع والمراحل المبكرة من الهندسة.</li><li>مسؤول عن مراجعة واعتماد مهام التحضير المختلفة للتشغيل التجريبي التي ينفذها المقاول: هيكل تجزئة العمل، والأولويات، والموارد، والجدول الزمني، إلخ.</li><li>مراجعة واعتماد إجراءات إدارة التشغيل التجريبي (التسليم، قوائم التحقق، التداخلات، قائمة الملاحظات، التنظيم الداخلي، وشهادات الاعتماد).</li><li>مراجعة واعتماد ملفات التشغيل التجريبي التي يعدها المقاول (بما في ذلك إدخال البيانات في قاعدة البيانات وكتابة إجراءات الاختبار التشغيلي).</li><li>تنسيق أنشطة فريق التشغيل التجريبي (مهندسي الأنظمة، مشرفي التخصصات، مراقب التخطيط/قائمة الملاحظات، ومالك الأصول).</li><li>تحديد ومعالجة جميع مشكلات التداخل مع حزم المشاريع الأخرى فيما يتعلق بالتشغيل التجريبي.</li><li>إعداد خطة التشغيل التجريبي الشاملة والحصول على الموافقة عليها بالتنسيق مع مالك الأصول.</li><li>مسؤول عن فحص واعتماد الإكمال الميكانيكي.</li><li>مسؤول عن حضور ومراقبة أنشطة ما قبل التشغيل التجريبي التي يجريها المقاول.</li><li>التوقيع المزدوج على جميع ملفات ما قبل التشغيل التجريبي عند الوصول إلى حالة الجاهزية للتشغيل التجريبي (RFC).</li><li>مراقبة والتحكم في جميع أنشطة التشغيل التجريبي التي ينفذها المقاول والتقارير الخاصة بها.</li><li>متابعة التقدم مقابل الخطة والتوصية بأي إجراءات تصحيحية لازمة، والمتابعة الدقيقة لقائمة الملاحظات مع المقاول ومالك الأصول.</li><li>التنسيق مع المقاول/الموردين لحل مشكلات أداء الأنظمة/المعدات.</li><li>تنسيق الجدول الزمني لتواجد/زيارات موردي المعدات في الموقع (المواقع)، والتدريب العملي والنظري لفريق العمليات للمساعدة في التشغيل التجريبي للمعدات والعمليات الحرجة.</li><li>مراجعة واعتماد ملفات التشغيل التجريبي بعد الانتهاء من أنشطة التشغيل التجريبي والتوقيع على شهادات الجاهزية لبدء التشغيل والتسليم.</li><li>المشاركة والمساهمة في جميع دراسات ومراجعات تصميم السلامة.</li><li>دعم ومساعدة فريق المشروع في مرحلة إغلاق المشروع.</li><li>المشاركة الفعالة والمساهمة في برامج التطوير القطرية.</li></ul><br><ul><li>بكالوريوس علوم في تخصص هندسي مع خبرة واسعة في التشغيل التجريبي لمشاريع النفط والغاز.</li><li>خبرة لا تقل عن اثني عشر (12) عامًا في تصميم وإنشاء وتكليف وبدء تشغيل محطات معالجة النفط والغاز، ويفضل أن تكون في المشاريع البحرية مع شركات مقاولات EPIC، منها ثماني (8) سنوات على الأقل كمنسق/قائد فريق تشغيل تجريبي.</li><li>مهارات ممتازة في التواصل والتعامل مع الآخرين.</li><li>مهارات قيادية وإدارية.</li><li>خبرة فنية ذات صلة. الاطلاع على الهندسة متعددة التخصصات مع مهارات استكشاف الأخطاء وإصلاحها وحل المشكلات.</li><li>مهارات جيدة في تكنولوجيا المعلومات والتحليل.</li><li>القدرة على العمل بشكل جيد تحت الضغط.</li></ul><br><ul><li><strong>الراتب:</strong><ul><li>معدل يومي بالريال القطري بالإضافة إلى البدلات</li></ul></li><li><strong>جدول العمل:</strong><ul><li>8 ساعات / 5 أيام</li></ul></li></ul><ul><li><strong>المدة:</strong><ul><li>سنتان، مع إمكانية التمديد</li></ul></li><li><strong>الموقع:</strong><ul><li>قطر</li></ul></li></ul></div>
Company Description M/s Samsung E&A is an engineering and construction organization delivering large-scale projects across infrastructure and industrial sectors. The company focuses on quality, safety, and innovation in all phases of project execution, from design through commissioning. Teams work in diverse, multicultural environments and collaborate closely with clients and partners to meet demanding technical and regulatory standards. Professionals joining Samsung E&A can expect structured processes, exposure to complex projects, and opportunities for continuous skill development. Role Description The Quality Assurance Quality Control Engineer is a full-time, hybrid role based in Al Khor and Al Thakhira, Qatar, with some flexibility for work from home. The role is responsible for developing, implementing, and maintaining QA/QC procedures and standards across construction activities, ensuring compliance with project specifications, codes, and regulations. Day-to-day tasks include planning and performing inspections and tests, reviewing drawings and method statements, monitoring materials and workmanship, and documenting non-conformities with clear corrective actions. The engineer will coordinate with project managers, site engineers, subcontractors, and suppliers to resolve quality issues, support audits, and prepare detailed quality reports. The role also involves continuous improvement of quality systems, training site personnel on QA/QC requirements, and supporting handover documentation. Qualifications Candidates should possess strong Quality Assurance skills, including developing and implementing quality plans, procedures, and documentation in construction or engineering projects. Candidates should possess practical Quality Control skills, including executing inspections, supervising tests, and verifying materials and workmanship against project standards. Candidates should possess Quality Auditing skills, including planning and conducting internal and external audits, reporting findings, and following up on corrective and preventive actions. Candidates should possess Quality Management skills, including familiarity with quality management systems (e.g., ISO 9001), performance metrics, and continuous improvement methodologies. Candidates should possess Inspection skills, including interpreting technical drawings and specifications, using inspection tools, and preparing clear inspection reports. Bachelor’s degree in Civil, Mechanical, or related Engineering discipline, or equivalent technical qualification. Experience in construction or industrial projects, preferably with large EPC or infrastructure works in the Middle East. Strong knowledge of relevant standards and codes, and ability to work with multicultural teams and multiple stakeholders. Proficiency in MS Office and basic quality management or reporting software; strong written and verbal communication skills in English. Ability to work on-site in Al Khor and Al Thakhira, Qatar, with flexibility for hybrid work and occasional extended hours based on project needs.