وظائف ميكانيكى سفن

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Senior Mechanical Engineer (Theme Park and Entertainment) to join our team in Qatar! In this role, you will be part of the Construction Supervision Consultant team supporting the delivery of a landmark luxury hospitality and entertainment development featuring immersive entertainment experiences, world-class hospitality, premium retail, and diverse leisure attractions. You will supervise the installation, testing, commissioning, and handover of conventional and specialist mechanical systems, including HVAC, chilled water, plumbing, utility networks, ride-support infrastructure, show HVAC, water attractions, filtration and water-treatment systems, life-support systems, and other themed entertainment installations.</p><h2>What You ll Be Doing:</h2><ul><li>Supervise the construction, installation, testing, and commissioning of all mechanical systems in accordance with the Contract Documents, approved IFC drawings, specifications, and applicable codes and standards.</li><li>Monitor the Contractor s mechanical works to ensure compliance with approved quality standards, construction methodologies, project schedules, and HSE requirements.</li><li>Review and provide technical comments on shop drawings, material submittents, method statements, RFIs, inspection requests, and other technical submissions related to mechanical works.</li><li>Supervise the installation and integration of HVAC, chilled water, plumbing, drainage, fire-protection interfaces, utility networks, and other building mechanical services.</li><li>Provide technical oversight for specialist themed entertainment mechanical systems, including ride-support infrastructure, show HVAC, water attractions, water-treatment and filtration systems, life-support systems, compressed-air systems, and other specialist installations.</li><li>Coordinate mechanical interfaces with structural, architectural, electrical, fire and life safety, ride systems, show systems, utility infrastructure, and specialist attraction vendors.</li><li>Witness inspections, Factory Acceptance Tests, Site Acceptance Tests, functional testing, and mechanical commissioning activities to verify compliance with project requirements.</li><li>Monitor construction quality through regular inspections, identify non-conforming works, and coordinate corrective actions with the Contractor and QA/QC team.</li><li>Support the Resident Engineer in evaluating variations, technical issues, engineering clarifications, and site instructions related to mechanical works.</li><li>Coordinate with operators, specialist suppliers, manufacturers, and commissioning teams to support the successful integration and operational readiness of all mechanical systems.</li><li>Participate in snagging, de-snagging, substantial completion inspections, handover activities, and Defects Liability Period inspections related to mechanical systems.</li><li>Review as-built drawings, operation and maintenance manuals, commissioning documentation, warranties, and handover records for completeness and compliance.</li><li>Prepare technical reports, inspection records, progress updates, and recommendations for submission to the Resident Engineer and Project Management team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>Professional Engineer, Chartered Engineer, or equivalent professional registration is preferred.</li><li>Minimum 12 years of experience supervising mechanical works on major hospitality, entertainment, mixed-use, or destination developments.</li><li>Demonstrated experience in Construction Supervision or Resident Engineering roles on large multidisciplinary projects.</li><li>Proven experience supervising mechanical systems associated with themed entertainment developments, water parks, attraction facilities, integrated resorts, or other complex leisure destinations.</li><li>Strong experience with HVAC systems, chilled water systems, plumbing, water-treatment and filtration systems, life-support systems, utility infrastructure, and mechanical building services.</li><li>Experience supervising testing and commissioning, integrated systems testing, operational readiness, and project handover.</li><li>GCC experience is highly desirable.</li><li>Comprehensive knowledge of mechanical engineering systems, construction-supervision practices, and contract compliance for major hospitality, entertainment, and mixed-use developments.</li><li>Strong understanding of HVAC systems, chilled water systems, plumbing, drainage, utility infrastructure, water-treatment and filtration systems, life-support systems, and specialist mechanical installations.</li><li>Extensive knowledge of mechanical systems supporting themed attractions, water rides, entertainment venues, and other specialized guest-experience facilities.</li><li>Strong understanding of construction inspections, material approvals, shop-drawing reviews, testing and commissioning, integrated systems testing, and handover processes.</li><li>Proven ability to coordinate multidisciplinary stakeholders, including Contractors, specialist attraction vendors, manufacturers, operators, consultants, commissioning teams, and statutory authorities.</li><li>Strong analytical and problem-solving capabilities, with the ability to identify construction issues, engineering conflicts, and practical site solutions.</li><li>Excellent communication, coordination, reporting, and stakeholder-management skills.</li><li>Ability to review and interpret IFC drawings, technical specifications, shop drawings, engineering calculations, commissioning documentation, and operation and maintenance manuals.</li><li>Strong organizational skills, with the ability to manage multiple work fronts while maintaining focus on quality, safety, schedule, and contractual compliance.</li><li>Ability to function effectively within large multidisciplinary construction environments while maintaining focus on engineering excellence, operational readiness, successful commissioning, and project handover.</li></ul>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As an General Mechanic, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>To respond as quickly as possible to maintenance requests from both clients and colleagues. To maintain a shift log book as a record for all occurrence during the assigned shift. To carry out preventive maintenance tasks whenever they are assigned making sure to fully complete the required documentation. To respond immediately to all emergency calls for leakage, fire, power, etc. To ensure the implementation of all instructions given by the Assistant Director of Engineering / or Duty Foreman. To help with the installation of new equipment when required. To be responsible for cleanliness and protection of surroundings whilst performing work. To carry out any other reasonable duties and responsibilities as assigned and should be multi-tasking. To respond to changes in the (enter function) function as dictated by the industry, company or the Hotel.<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Mechanical Draftsman</strong></p><ul><li><p>Prepare detailed <strong>shop drawings</strong>, <strong>coordination drawings</strong>, and <strong>as-built drawings</strong> for Mechanical (MEP) services.</p></li><li><p>Develop accurate drawings for <strong>HVAC, Plumbing, Drainage, and Fire Fighting systems</strong> based on project specifications.</p></li><li><p>Review engineering drawings, design documents, and technical specifications before drafting.</p></li><li><p>Coordinate with Mechanical Engineers, Site Engineers, and other MEP disciplines to resolve drawing conflicts.</p></li><li><p>Update drawings based on site changes, consultant comments, and project revisions.</p></li><li><p>Ensure all drawings comply with project standards, local regulations, and client requirements.</p></li><li><p>Maintain proper documentation and drawing revision records.</p></li><li><p>Support project teams by providing technical drafting assistance throughout the project lifecycle.</p></li></ul><br><p><strong>Electrical Draftsman</strong></p><ul><li><p>Prepare detailed <strong>shop drawings</strong>, <strong>coordination drawings</strong>, and <strong>as-built drawings</strong> for Electrical systems.</p></li><li><p>Produce accurate <strong>Lighting &amp; Power Layouts</strong>, <strong>Containment Drawings</strong>, <strong>Substation Drawings</strong>, <strong>DB Schedules</strong>, and <strong>Schematic Diagrams</strong>.</p></li><li><p>Interpret electrical design drawings, specifications, and consultant requirements.</p></li><li><p>Coordinate with Electrical Engineers, Site Engineers, and other MEP disciplines to ensure clash-free drawings.</p></li><li><p>Revise drawings based on site conditions, consultant comments, and construction changes.</p></li><li><p>Ensure compliance with project specifications, electrical standards, and local regulations.</p></li><li><p>Maintain drawing revisions, documentation, and project records.</p></li><li><p>Provide drafting support during project execution and final handover documentation.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Diploma or Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Drafting, or a related discipline.</p></li><li><p>Minimum <strong>3–5 years of GCC/MEP drafting experience</strong> is preferred.</p></li><li><p>Proficient in <strong>AutoCAD</strong> with the ability to prepare accurate shop drawings and as-built drawings.</p></li><li><p>Good understanding of MEP standards, construction drawings, and coordination requirements.</p></li><li><p>Ability to interpret engineering drawings, specifications, and project requirements.</p></li><li><p>Experience working on commercial, residential, or industrial construction projects.</p></li><li><p>Familiar with local and international drafting standards.</p></li><li><p>Strong attention to detail, time management, and communication skills.</p></li><li><p>Able to work independently as well as in a team environment.</p></li><li><p>Ready to join immediately or within a short notice period will be an advantage.</p></li></ol><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide mechanical engineering technical support to ensure the safe operation and maintenance of mechanical equipment installed offshore in accordance with established policies and procedures, which contribute to the department objectives and are in alignment with the company strategy.</li> </ul><br><ul> <li>Provide mechanical engineering support to offshore operations and maintenance in day-to-day troubleshooting including Level-2 complexity Issues and PM/CM activities as per maintenance strategies.</li> <li>Initiate eMOC's which require studies, support engineering in feasibility study and Implementation of EMOC recommendations to the asset instrument team.</li> <li>Provide input to Reliability Centred Maintenance (RCM) team for improving system maintenance strategies, participate and contribute to Root Cause Failure Analysis (RCFA's), risk screening, Risk Based Work Selection (RBWS), Formal Risk Assessment (FRA), Bad Actor Analyse, Risk Assessment and Equipment Strategies Reviews/Optimization to ensure the compliance of technical requirement.</li> <li>Develop discipline specific budget and provide inputs to the department budget.</li> <li>Support close collaboration with Offshore Maintenance, Workshop, Engineering and Project Management dept. for the timely close out of outstanding maintenance activities and the process review and development of maintenance procedures.</li> <li>Support activities undertaken by contactors, consultants and service providers.</li> <li>Execute the maintenance quality verification program.</li> <li>Provide in house technical trainings to asset maintenance team as a part of technical competency program.</li> <li>Conduct technical evaluation of material initiated for procurement including routine, non-routine and shutdown activities to ensure availability of right quality and specification of the material. Collaborate closely with obsoletion management team for the effective and efficient resolution of the obsolete item for critical equipment.</li> <li>Participate in establishing a demand plan for the contracts activities and establish all the contracts for mechanical maintenance activities including post contract award process support.</li> </ul><br><ul> <li>Bachelor's degree in Mechanical Engineering or Science majoring in Mechanical Engineering</li> <li>6 years' experience in mechanical maintenance in oil and gas or petrochemical sector</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance </li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> <li><strong>Duration:</strong><ul> <li>15 months to 24 months, with possible extension</li> </ul></li> <li><strong>Location:</strong><ul> <li>Qatar Onshore</li> </ul></li> </ul> </div>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<p>Conduct Mechanical Engineering activities and in-house site surveys for projects, from initial concept definition phase through to, engineering studies, FEED, detailed design, and commissioning.</p><p>Ensure the required technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in work scopes and whilst conducting Mechanical Engineering activities.</p><p>Review technical deviations and variations to approved guidelines, codes, standards, and practices.</p><p>Support Engineering Department to review, update and apply standards.</p><p>Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements.</p><p>Co-ordinate engineering designs, develop and review multi-disciplinary work scopes for projects and other engineering activities. Ensure that the work-scope is comprehensive and clear.</p><p>Review and approve method statements developed by contracted organizations for scope compliance. Liaise with contracted organizations to resolve technical issues.</p><p>Develop, update, and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery.</p><p>Conduct evaluation of technical bid packages for scope compliance.</p><p>Review and evaluate the Contract Changes/Variation to approved guidelines and practices.</p><p>Support the development of personal technical competency and skills and those of Coworkers.</p><p>Participate in structured training for Associate Qatari Engineers.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Mechanical Engineering.</p><p>Chartered Engineer / Professional Engineer status or equivalent is preferable.</p><p>10 years' relevant post graduate experience, of which 6 years should be related to the Oil &amp; Gas industry in both Static and Piping disciplines. Expert level competency is required at least in one of the discipline areas (i.e., static or piping).</p><p>Ability to identify and utilize relevant engineering standards, international codes, and company standards, related to Mechanical Engineering.</p><p>Proven ability for effectively managing time, cost, and quality in either greenfield or brownfield engineering major projects as well in multiple project environment for discipline engineering. Having experience in concept development, Front End Engineering Design (FEED), EPIC, and technical support to site/plant operation.</p><p>Good communications and presentation skills with fluency in English.</p>

<p>Conduct Materials &amp; Corrosion Engineering activities and in-house site surveys for projects, from initial concept definition phase through to; engineering studies, FEED, detailed design and commissioning. Ensure the required Company technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in work-scopes and whilst conducting Materials &amp; Corrosion Engineering activities. Review technical deviations and variations to approved guidelines, codes, standards and practices. Support Engineering Department to review, update and apply Company standards and Company's amendments to external standards. Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements. Co-ordinate engineering designs, develop and review multi-disciplinary workscopes for projects and other engineering activities. Ensure that the work-scope is comprehensive and clear. Review and approve method statements developed by contracted organizations for scope compliance. Liaise with contracted organizations to resolve technical issues. Develop, update and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery. Conduct evaluation of technical bid packages for scope compliance. Review and evaluate the Contract Changes/Variation to approved guidelines and practices. Support the development of personal technical competency and skills and those of Coworkers. Participate in structured training for Associate Qatari Engineers Contribute towards updating HSE Codes, Standards, Specifications, and Philosophies.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Mechanical or Metallurgical Engineering<br>Chartered Engineer/ Professional Engineer status or equivalent is preferable.<br>10 years relevant post graduate experience, of which 6 years should be related to the Oil &amp; Gas industry.<br>Ability to identify and utilize relevant engineering standards and Codes related to Materials &amp; Corrosion Engineering.<br>Proven ability to manage time, cost and quality in engineering projects within a multiple project environment.<br>Good communications and presentation skills with fluency in English.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment: 1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings). 2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure) 3. Tank (Structures, valves and fittings, air vents) 4. Air handling Units (Filter, ducting, AHU Housing) 5. Filtration system (Filters, housings, pipe and fittings) 6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system 7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems Supervise, guide and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Key Responsibilities</span><br></span><ul><li><span>Diagnose and repair electrical faults in cars, trucks, and commercial vehicles.</span><br></li><li><span>Inspect, repair, and replace batteries, alternators, starters, wiring, relays, fuses, sensors, and lighting systems.</span><br></li><li><span>Troubleshoot vehicle electrical and electronic systems using diagnostic scanners, multimeters, and testing equipment.</span><br></li><li><span>Install and repair vehicle accessories, including lights, horns, alarms, cameras, and electrical control units.</span><br></li><li><span>Diagnose and repair automotive air-conditioning systems.</span><br></li><li><span>Perform AC gas charging, refrigerant recovery, vacuum testing, and leak detection.</span><br></li><li><span>Repair or replace AC compressors, condensers, evaporators, expansion valves, blowers, hoses, and related components.</span><br></li><li><span>Carry out preventive maintenance and routine inspections of electrical and AC systems.</span><br></li><li><span>Read and understand vehicle electrical wiring diagrams and technical manuals.</span><br></li><li><span>Ensure all repairs are completed according to manufacturer specifications and safety standards.</span><br></li><li><span>Maintain accurate records of inspections, repairs, spare parts, and services performed.</span><br></li><li><span>Report major faults, required spare parts, and additional repair requirements to the supervisor.</span><br></li><li><span>Maintain tools, equipment, and the workshop area in a safe and organized condition.</span><br></li></ul><br><span>Requirements<span>ITI, Diploma, or technical certification in Automotive Electrical, Automobile Engineering, Refrigeration and Air Conditioning, or a related field.</span><br><span>Minimum 3–5 years of relevant experience as an Automotive Electrician and AC Mechanic.</span><br><span>Practical experience working with cars, light vehicles, buses, and heavy trucks.</span><br><span>Strong knowledge of 12V and 24V automotive electrical systems.</span><br><span>Experience in vehicle AC troubleshooting, gas charging, leak testing, and component replacement.</span><br><span>Ability to operate diagnostic scanners, multimeters, AC recovery machines, and other workshop equipment.</span><br><span>Good understanding of electrical wiring diagrams and vehicle technical manuals.</span><br><span>Ability to independently identify faults and complete repairs efficiently.</span><br><span>Basic communication skills in English.<br></span><br>Duration: 2 Months and Extendable</span><br> </div>

<p>Operate conventional horizontal lathes, boring machines, and milling machines to perform precision machining operations.</p><p>Machine, repair, and refurbish components used in turbo compressors, reciprocating compressors, gas turbines, and steam turbines.</p><p>Perform machining activities in accordance with engineering drawings, specifications, and quality standards.</p><p>Carry out reverse engineering of worn or damaged components when required.</p><p>Conduct dimensional inspections using precision measuring instruments such as verniers, micrometers, dial gauges, and bore gauges.</p><p>Ensure all machined components meet specified tolerances and quality requirements.</p><p>Prepare machining and inspection reports and maintain accurate documentation.</p><p>Maintain workshop equipment and ensure compliance with safety procedures and housekeeping standards.</p><p>Support continuous improvement initiatives within the workshop.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</li><li>Minimum 10 years of experience in conventional machining and rotating equipment repair.</li><li>Proven experience operating horizontal lathes, boring machines, and conventional milling machines.</li><li>Experience machining components for gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</li><li>CNC operation and programming experience is an added advantage.</li><li>Strong understanding of engineering drawings, machining tolerances, and precision measurement techniques.</li><li>Good knowledge of workshop safety standards and best practices.</li><li>Proficiency in Microsoft Office for documentation and reporting.</li><li>Conventional Lathe Operation</li><li>Boring Machine Operation</li><li>Milling Machine Operation</li><li>Precision Machining</li><li>Reverse Engineering</li><li>Engineering Drawing Interpretation</li><li>Dimensional Inspection</li><li>Rotating Equipment Repair</li><li>Problem Solving</li><li>Teamwork and Communication</li><li>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</li><li>Minimum 10 years of hands-on experience as a Machinist in a workshop or service center environment.</li><li>Proven experience operating conventional horizontal lathes, boring machines, and milling machines.</li><li>Experience machining and repairing components for gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</li><li>Ability to read and interpret engineering drawings and work to close machining tolerances.</li><li>Skilled in using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.</li><li>Experience with reverse engineering and component refurbishment is preferred.</li><li>CNC machining and programming experience is an added advantage.</li><li>Strong commitment to safety, quality, and continuous improvement.</li><li>Good communication skills and the ability to work effectively in a team environment.</li></ul>

<p>Responsible for delivery of General Engineering Training to cadets within the BAE Systems Qatar Technical Institute in Doha, Qatar. The Instructor/Assessor will deliver a range of training modules, across the General Engineering programme or within their Mechanical/ Electrical /Armament trade boundary . The successful delivery of the modules will contribute toward the learners attainment of externally accredited qualifications. The Instructor/Assessor will assess learner performance, in accordance with the assessment strategy in force for the modules. Assessment of learners may take place from within or outside of their trade boundary, to allow for independence. The Instructor/Assessor will actively contribute to the continuing improvement of the QTI, through identification of ideas and embracing the suggestions of others. Core Activity The roles will deliver training to QAF cadets within the QTI, predominantly within the classroom but also within the practical training areas. The roles will utilize both presentation media and training devices and assets to deliver training and the instructor must be proficient in all methods. The roles will conduct assessment of the learners, predominantly through knowledge-based testing, in accordance with the assessment strategy in place. Key Accountabilities: Responsible for the delivery of the General Engineering programmes within the QTI ensuring training is delivered to plan and quality. Responsible for support to the Specialty Engineering programme as required during periods of operational need. Establish and maintain effective links with local QAF Cadet Welfare teams to ensure their support is forthcoming to cadet welfare and discipline issues. Maintain and develop a customer focused approach that delivers customer satisfaction. Ensure all SHE requirements are met in the training environment. Ensure compliance with statutory, regulatory and corporate requirements. Where required to be prepared to assist in the development of the training courseware</p><p><strong>Desired Candidate Profile</strong></p><p>Level 4 Qualification in Teaching &amp; learning (inc. 90 hrs teaching practice)</p><p>5yrs training delivery experience gained outside of QTTC (or 2yrs within) delivering:</p><ul><li>Apprentice training</li><li>Military trade training</li><li>Type training</li><li>FE College (Engineering or Science)</li></ul><p>TAQA Qualified</p><p>2yrs experience in training design following BSAT/DSAT model</p><p>Fluent spoken Arabic would be an advantage</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Key Responsibilities:</span><br><span>&nbsp; *&nbsp;&nbsp; Assist technicians in maintenance and repair of JCB and other brand heavy equipment machines.</span><br><span>&nbsp; *&nbsp;&nbsp; Clean, wash, and prepare machines for service and inspection.</span><br><span>&nbsp; *&nbsp;&nbsp; Support dismantling and assembling of machine components.</span><br><span>&nbsp; *&nbsp;&nbsp; Handle tools, equipment, and workshop materials safely.</span><br><span>&nbsp; *&nbsp;&nbsp; Assist with oil changes, filter replacement, greasing, and basic servicing.</span><br><span>&nbsp; * &nbsp;&nbsp;Help in loading, unloading, and moving parts within the workshop.</span><br><span>&nbsp; *&nbsp;&nbsp; Maintain workshop cleanliness and housekeeping standards.</span><br><span>&nbsp; *&nbsp;&nbsp; Follow instructions from Workshop Supervisor and Technicians.</span><br><span>&nbsp; *&nbsp;&nbsp; Ensure safe working practices at all times.</span><br><span>&nbsp; *&nbsp;&nbsp; Perform basic repair and maintenance tasks as assigned.</span><br></span><br><span>Requirements<span>Requirements:</span><br><span>&nbsp; *&nbsp;&nbsp; Basic mechanical knowledge must.</span><br><span>&nbsp; *&nbsp;&nbsp; Experience in construction equipment, automotive, or heavy equipment workshops.</span><br><span>&nbsp; *&nbsp;&nbsp; Physically fit and willing to learn.</span><br><span>&nbsp; *&nbsp;&nbsp; Ability to work independently and as part of a team.</span><br></span><br> </div>

<p>Technical decisions and engineering judgments have considerable safety, cost and/or schedule impact. Requires ability to influence people and work in multi discipline/cultural environment. Resolve technical problems within the discipline area. Visit work sites to verify / establish design conditions and assist during construction, pre-commissioning, commissioning, start up and troubleshooting of facilities. Manage conflicting priorities, varying technical requirements, plant / equipment shutdowns and Project schedule deadlines. Support development and training of related discipline skill-pool and standards. Support dealing with various stake holders Responsible for providing required quality Mechanical Static / Piping engineering support and expertise through all stages of the project Verify and review technical Mechanical Static / Piping documents, and design documents in accordance with approved standards and to meet Operations, Maintenance, Asset integrity and HSE requirements. Ensure scope preparation completeness review with hands on experience in operation and maintenance of rotating and non-rotating equipment, various pumps and compressors, reliability and availability of equipment, APMS (Asset Performance Management System), mechanical and piping modifications, utilities etc. Plan and coordinate between Operations, Maintenance, Asset Integrity, Process and Operational Safety, Fire Engineering and ICT teams to ensure project requirements are met and aligned and provide continuous project assurance. Identifies potential hazards during Engineering activities (as applicable) such as Document Review, Design Safety Review workshop, HAZID, ENVID, HAZOP, QRA, FERA, etc., participates in technical meetings, commissioning activities, SAT, Plant pre-start up safety audits, performance tests raises punch lists and provide support to operations and maintenance teams in various stages of project activities. Coordinate with Project execution department, engineering, operations and maintenance teams during projects' FEED and EPIC stages to align operations, maintenance, Asset Integrity and HSE requirements. Coordinate with all relevant stakeholders to resolve technical issues, punch lists and warranty issues during pre-commissioning and commissioning stages until the projects are successfully commissioned and handed over. Support lead engineer or his supervisor and ensure that all applicable environmental, process and safety technical policies, standards are fully integrated and implemented. Provide necessary support during any incident analysis, failure investigations etc. Ensure SIMOPS, Various project interfaces so that shutdown activities are properly planned for effective execution. Support development of Qatari teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in mechanical engineering specialized in Static and Piping. Chartered Engineer status or equivalent is preferable. Minimum 15 years relevant post graduate experience, of which 10 years in Oil &amp; Gas industry with an international reputable Operating company. Experience in operations and maintenance is mandatory. Skill / knowledge of International, Shell DEPs and/or QP standards related to his area of expertise and Design Software related to Mechanical Static / Piping Engineering such as Stress Analysis software, etc. Exposure with international consulting company, EPIC contractor with projects' pre-commissioning, commissioning, start up and Hand-over activities is an added advantage. Possess sound fundamentals in his discipline area. Shall possess very good technical skills in his discipline. Possess good communication, presentation skills and fluent in English language.</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Support Contractor to identify and submit the QA/QC documents (ITPs, QCPs, Welding / NDT / HT / Painting and other test procedures, MARs etc.,) in line with Construction program, their timely review and approval.</li> <li>Assist functional supervisor in review / approval of relevant QMS, Engg., &amp; Procurement documents, implementation of Quality Programs, and resolution of discipline matters escalated to the Project Management.</li> </ul><br><ul> <li>Ensure Implementation of Project QA/QC requirements at project site and suppliers / subcontractor's works complying to project specification and other technical requirements.</li> <li>Organize Pre-Activity Review meetings, attend Quality Walk through and QA/QC Weekly meetings.</li> <li>Undertake surveillance of on-site and off-site Structural / Piping / Pipeline shop and Field fabrication / Equipment Erection and associated inspection &amp; testing activities, Surface Preparation &amp; Painting activities, identify potential or actual non-conformances and direct contractor in taking necessary Correction, corrective and preventive actions.</li> <li>Initiate or ensure initiation of NCRs for the recurrent surveillance observations and non-conformities and coordinate / follow-up for RCA / Correction / Corrective /Preventive action proposals and timely close out.</li> <li>Monitor the progressive compilation of Material Test Certificates and Construction Records and their traceability.</li> <li>Monitor and verify the implementation of Preservation Management System.</li> <li>Ensure the Contractors maintain, update, and publish the IMTE Registers on regular basis and calibration records maintained.</li> <li>Ensure appropriate Systems / Processes / Procedures / Computer data base established by Contractor to maintain the Inspection and Test status during pre-fabrication, field erection, testing and statistical analysis of the data.</li> <li>Monitor the KPIs, Special processes and personnel performance.</li> <li>Participate in Project QHSE audits and Pre-Qualification Audits of Vend.rs / Suppliers / Sub-Contractors. Conduct ITP / QCP / MS / Process / Activity level compliance audits / Checks.</li> <li>Monitor Contactor/Sub-Contractor/Third party inspectors &amp; Engineers and Subordinates, performance, provides necessary support / guidance and reports to functional supervisor.</li> <li>Implement and enforce the elements of Company Quality Management System requirements applicable to your function.</li> <li>Exposed to Construction Site and Prevailing Climatic Conditions at least 50% of time.</li> <li>Ensure own safety and the safety of others who may be affected by Company business, whether the activity is under direct control or not.</li> </ul><br><ul> <li>Bachelor's degree in mechanical engineering (or Equivalent) from a recognized university.</li> <li>IRCA Certified QMS Lead Auditor.</li> <li>Welding Inspector Certification (CSWIP 3.1 / AWS-CWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP) is a must. Equivalent International Certifications acceptable.</li> <li>Having IIW-Welding Engineer / NDT level-3 and Certification in advanced NDT (PAUT, TOFD, Auto UT etc.,) will be an advantage.</li> <li>Professional membership / affiliations with recognized chartered or other professional institutions like ASNT / AWS / TWI / NACE / ASQ-CMQ&amp;OE, MCQI-CQP or similar is desirable.</li> <li>15 years' experience in the construction of major Green field or Brown-field Process Plants in Oil &amp; Gas industry including large scale solar (Photovoltaic) projects.</li> <li>Worked with major EPIC Contractors / End User in similar position in major projects with overall responsibility for the Quality of Piping / Mechanical discipline Construction and Commissioning activities. Sound working knowledge on QA/QC aspects, testing requirements and acceptance criteria related various Piping systems and Rotating / Stating Equipment and managing overall discipline's QA/QC aspects in major Oil and Gas Projects.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

A Snapshot of Your Day<br><br>We are seeking a highly skilled and experienced Workshop Repair Technician with a strong background in machining and rotating equipment repairs such as (turbo and reciprocating compressors, steam and gas turbines.) The ideal candidate will have hands-on expertise in operating horizontal lathes, boring machines, and small milling machines, combined with the ability to perform precision inspections, generate technical drawings, and support continuous improvement initiatives within the workshop.<br><br>How You’ll Make An Impact<br><br>Operate horizontal lathes, boring machines, and milling machines for precision machining tasks. Has the knowledge to Perform complex repairs on turbo compressors, reciprocating compressors, steam turbines, and gas turbines. Execute reverse engineering for worn or damaged components. Conduct detailed dimensional inspections of parts using precision measuring tools. Prepare comprehensive inspection reports and maintain accurate documentation. Generate 2D and 3D CAD drawings for components and assemblies. Support reverse engineering projects and contribute to design improvements. Collaborate on process improvements and workshop development initiatives. Promote and maintain a strong safety culture in all activities. Utilize MS Office for reporting, documentation, and communication.<br><br><br>What You Bring<br><br>Diploma or Technical Certification in Mechanical Engineering or Machining with 10+ years of experience in rotating equipment repairs and machining operations. Proven ability to operate horizontal lathes, boring machines, and milling machines. Strong knowledge of turbo compressors, reciprocating compressors, steam turbines, and gas turbines repair processes. Proficiency in CAD software (Auto CAD, Inventor, Solid Works, or equivalent). Familiarity with reverse engineering techniques and precision measurement tools. Excellent understanding of safety standards and workshop best practices. Multi-tasking and adaptability in a fast-paced environment. Strong analytical and problem-solving skills with creative mindset for process improvement and innovation. Effective communication and teamwork abilities.<br><br><br>About The Team<br><br>Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Opportunity to work on challenging projects in an exciting environment Opportunity for remote/flexible work Professional support and strong collaboration with colleagues around the world Professional development opportunities within the company<br><br><br>https://jobs.siemens-energy.com/jobs

<p><strong>Primary Purpose of the Job</strong></p><p>Strong working understanding from Charterer/Seller perspective, of Commercial processes and documentation, as they relate to the Marine transportation of LNG and Hydrocarbon Products.</p><p>Lead auditor certified preferred.</p><p>Proficient written and oral English language skills.</p><p>Strong written, verbal, and interpersonal communication skills with the ability to build relationships and influence a wide range of stakeholders both internally and externally.</p><p>Computer literacy (MS Office).</p><p><strong>Required Experience and Skills</strong></p><p>Minimum 8 years relevant experience in marine industry (vetting, operations, terminals, incident investigations, and other marine functions).</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements &amp; Summary</strong></p><ul><li>Company : QatarEnergy</li><li>Skills : Marine Engineering , Port Operations</li><li>Experience : 8 + Years</li><li>Education : Masters Degree</li><li>Location : Doha, Qatar</li></ul><p><strong>Department</strong></p><p>LNG SHIPPING</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 260000C9 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-09-03</span></li></ul><br> <br> <br> <br> <br> <br> </div>