وظائف مهندس مواد

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Responsible to lead all Structural engineering (analysis, specification, design basis, drawings) deliverables and designs related to the conceptual phase, Front-End Engineering Design (FEED) phase and EPCI deliverables for Offshore Jackets, Sensor Tower Platforms (STPs) and other jacket projects running thru Approved for Design (AFD), Approved for Construction (AFC) and until final As-Built dossier completions.</li> </ul><br><ul> <li>Ensures that all Project requirements, as detailed in the Scope of Work, for all structures are met including performing check and review of all Structural engineering deliverables such as Structural Design Basis, Structural specifications, in-service (in place, fatigue, pushover, boat impact and seismic) and preservice (lift, loadout, transportation, on-bottom) reports, Geophysical &amp; Geotechnical data, metocean data, probabilistic seismic hazard analysis (PSHA) data, wave scatter diagram data, and loading data.</li> <li>Provides general structural engineering technical leadership, advice, and guidance as to LNG practices and expectations. Supervise the Contractor structural team.</li> <li>Subject Matter Expert (SME) level competency in Structural Engineering discipline.</li> <li>Reviews the design work of Contractors, Consultants and other third parties, request corrections and recommends changes.</li> <li>Ensures that the design and operability are in accordance with the Client's operational philosophies.</li> <li>Reviews the project job specifications prepared by the Contractor(s) and ensure they are in accordance with Company's Engineering Guides, Design Practices, and applicable ExxonMobil Global Practices (EMGPs).</li> <li>Manages Contractors, Sub-contractors, vendors and sub-vendors and resolves the structural engineering concerns as required.</li> <li>Reviews and approves structural engineering deliverables, material requisitions, and purchase orders to ensure compliance with company specifications, engineering standards, and applicable design practices.</li> <li>Leads and coordinates structural engineering activities throughout the project lifecycle, including planning, scheduling, interface management, risk management, commissioning, and handover.</li> <li>Determines the acceptability of structural components, engineering techniques, and construction methods, while ensuring compliance with applicable international standards.</li> <li>Drives continuous improvement initiatives, supports offshore installation activities, and provides engineering interface with Drilling &amp; Completion and other disciplines as required.</li> <li>Participate in offshore installation activities and handover inspections as required and hence, shall be willing to travel offshore for short durations.</li> <li>Shall possess required safety certifications (T-BOSIET and H2S)</li> </ul><br><ul> <li>Bachelor's degree in Engineering.</li> <li>8 years of experience in Engineering roles, including 4 years in the Oil &amp; Gas Industry, and 1 year experience in a supervisory or acting role, or oversight of contractor / subcontractors / service / vendor personnel.</li> <li>Demonstrated experience as Structural Lead in Major Capital Offshore projects.</li> <li>Experience working with Oil and Gas operating companies, EPC contractors, sub-contractors and engineering consultants involved in the Oil and Gas industry.</li> <li>Strong knowledge and application of international engineering standards, specifications and design.</li> <li>Knowledge of project planning, scheduling, cost control, project gating system, project execution plan, risk management, change management, interface management, commissioning, and hand over processes/procedures.</li> <li>Experience managing contractors and third-party vendors, in several phases of the projects, preferably done a complete project from FEED to Start-up.</li> <li>Experience with risk assessment approach in decision making.</li> <li>Experience working in large-scale integrated operating organizations in Operations, Projects, Subsurface, etc.</li> <li>SME level competency in at least one Engineering Discipline.</li> <li>Experience with sour service gas and LNG facilities (for Onshore) and large Offshore Platforms / Pipelines (For Offshore).</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>JOB PURPOSE / OBJECTIVE</strong>&nbsp;</p><p>Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability.&nbsp;</p><br><p><strong>KEY ACCOUNTABILITIES</strong>&nbsp;</p><p><strong>Scaffolding Activities</strong>&nbsp;</p><ul><li><p>Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA).&nbsp;</p></li></ul><ul><li><p>Review scaffold design drawings and ensure proper load capacity and tagging system.&nbsp;</p></li></ul><ul><li><p>Conduct inspections and certify scaffolds prior to use.&nbsp;</p></li></ul><ul><li><p>Ensure scaffolding supports maintenance, turnaround (TA), and project requirements.&nbsp;</p></li></ul><p><strong>Insulation Works</strong>&nbsp;</p><ul><li><p>Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment.&nbsp;</p></li></ul><ul><li><p>Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements.&nbsp;</p></li></ul><ul><li><p>Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI).&nbsp;</p></li></ul><ul><li><p>Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency.&nbsp;</p></li></ul><p><strong>Painting &amp; Coating</strong>&nbsp;</p><ul><li><p>Supervise surface preparation (blasting, cleaning) and coating applications.&nbsp;</p></li></ul><ul><li><p>Ensure proper application of protective coatings for corrosion control.&nbsp;</p></li></ul><ul><li><p>Verify paint systems per company and international standards (e.g., SSPC, NACE).&nbsp;</p></li></ul><ul><li><p>Monitor environmental conditions (humidity, temperature, dew point).&nbsp;</p></li></ul><p><strong>Maintenance &amp; Turnaround Support</strong>&nbsp;</p><ul><li><p>Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities.&nbsp;</p></li></ul><ul><li><p>Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work.&nbsp;</p></li></ul><p><strong>Team Leadership</strong>&nbsp;</p><ul><li><p>Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities.&nbsp;</p></li></ul><ul><li><p>Ensure workforce competency and productivity with company standards, procedures, and safety requirements.&nbsp;</p></li></ul><ul><li><p>Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability.&nbsp;</p></li></ul><p><strong>Policies, Systems, Processes and Procedures</strong>&nbsp;</p><ul><li><p>Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.&nbsp;</p></li></ul><ul><li><p>Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements.&nbsp;</p></li></ul><ul><li><p>Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner.&nbsp;</p></li></ul><p><strong>Quality, Health, Security, Safety and Environment</strong>&nbsp;</p><ul><li><p>Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures,&nbsp;</p></li></ul><ul><li><p>Enforce company Safety Procedures, Permit to Work (PTW), and LT&amp;T systems.&nbsp;</p></li></ul><ul><li><p>Conduct toolbox talks and job safety analysis (JSA).&nbsp;</p></li></ul><ul><li><p>Ensure all SIP activities comply with Company regulations and site policies.&nbsp;</p></li></ul><ul><li><p>Identify hazards and implement mitigation measures.&nbsp;</p></li></ul><ul><li><p>Perform routine inspections and audits of SIP work.&nbsp;</p></li></ul><ul><li><p>Ensure documentation, reports, and checklists are completed accurately.&nbsp;</p></li></ul><ul><li><p>Verify contractor performance and adherence to specifications.&nbsp;</p></li></ul><p><strong>Reporting</strong>&nbsp;</p><ul><li><p>Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards.&nbsp;</p></li></ul><ul><li><p>Report incidents and near misses.&nbsp;&nbsp; Perform investigations, determine root cause and assign necessary action items.&nbsp;</p></li></ul><p><strong>Qatarization</strong>&nbsp;</p><ul><li><p>Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.&nbsp;</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>QUALIFICATIONS &amp; EXPERIENCE</strong>&nbsp;</p><p><strong>Education</strong>&nbsp;</p><ul><li><p>Required: Diploma in Mechanical Engineering or equivalent Technical field.&nbsp;</p></li></ul><br><p><strong>Experience</strong>&nbsp;</p><ul><li><p>Required: 5-7 years in petrochemical or oil &amp; gas industry.&nbsp;</p></li></ul><ul><li><p>Preferred: Experience in Petrochemicals Industry.&nbsp;</p></li></ul><br><p><strong>Other Job Specific Requirements and/or Vocational Accreditations</strong>&nbsp;</p><ul><li><p>Relevant certifications in scaffolding (e.g., CISRS or equivalent)&nbsp;</p></li></ul><ul><li><p>Coating/painting certification (e.g., NACE Level 1 or higher preferred)&nbsp;</p></li></ul><p></p></section>

Accounts Receivable Specialist Palomba General Trading LLCDoha, Qatar Full-time | On-site About Palomba General Trading LLCPalomba General Trading LLC is an international trading and business-development company headquartered in Dubai and operating across the GCC, Europe and selected international markets. Our portfolio includes natural ingredients, botanical extracts, flavour systems, essential oils and specialised raw materials serving customers in the food, beverage, nutraceutical, pharmaceutical, cosmetic and fragrance industries. We are seeking an Accounts Receivable Specialist to support customer invoicing, receivables reconciliation and payment monitoring across our international operations. The Role The Accounts Receivable Specialist will work closely with Finance and Commercial teams to maintain accurate customer accounts, monitor outstanding receivables and support timely reconciliation of incoming payments. The position requires strong accounting fundamentals, numerical accuracy and disciplined financial administration. Key Responsibilities Maintain accurate customer accounts and receivable records. Prepare and review customer invoices and supporting documentation. Record and allocate incoming customer payments. Reconcile customer account balances. Monitor outstanding invoices and payment due dates. Investigate payment and invoicing discrepancies. Prepare accounts receivable ageing reports. Coordinate account information with Commercial teams. Communicate professionally with customers regarding account documentation when required. Maintain accurate payment and reconciliation records. Support month-end accounts receivable activities. Prepare customer account statements. Monitor overdue balances and unresolved account items. Assist with cash-receipt forecasting. Support reconciliation of multi-currency customer accounts. Maintain accurate information within ERP and accounting systems. Prepare periodic receivables reports for management. Support improvements to accounts receivable processes and controls. Requirements Bachelor's degree in Accounting, Finance, Business Administration or a related discipline.2–5 years of relevant experience in accounts receivable, accounting or finance operations. Strong understanding of customer invoicing and account reconciliation. Good numerical and analytical skills. Strong Microsoft Excel skills. Excellent attention to detail. Experience with ERP or accounting systems. Excellent written and spoken English. Strong organisational abilities. Ability to manage multiple customer accounts and deadlines. Preferred Experience Experience in one or more of the following will be considered advantageous:International trading B2B distribution Import and export FMCGFood and beverage Pharmaceuticals Specialty chemicals Multi-currency accounting Experience working with international B2B customers is particularly relevant. Arabic is useful but not mandatory. Compensation & Benefits QAR 13,000 – 18,000 per month, depending on relevant experience and qualifications. The package may also include:Annual performance bonus Private medical insurance Paid annual leave Annual flight allowance Professional development opportunities Employment and visa support where legally applicable Application Candidates should submit an updated CV in English outlining relevant experience in accounts receivable, customer invoicing, account reconciliation, payment allocation or financial operations. Applicants should indicate:Current location Notice period Earliest availability Expected salary Only candidates whose professional experience is reasonably aligned with the position will be contacted. Palomba General Trading LLC evaluates candidates according to professional experience, skills and qualifications.

Job Description<br><br>The IT Store Employee plays a crucial role in the management and distribution of IT equipment and supplies. This position requires an organized, detail-oriented individual who is responsible for maintaining inventory, handling logistics, and ensuring that all IT resources are accounted for and properly distributed. An ITIL certification is required to ensure the employee understands and can implement IT service management best practices effectively.<br><br>Responsibilities<br><br>Job Responsibilities:<br><br>Maintain and manage inventory of all IT equipment, software, and supplies.<br><br>Receive and process incoming stock and materials, verify quantities against invoices, and update inventory records.<br><br>Prepare and fulfill IT equipment orders for internal departments promptly and accurately, ensuring that all necessary items are in stock.<br><br>Conduct regular audits of IT inventory to ensure accuracy and prepare reports for the IT management team.<br><br>Coordinate with IT and procurement departments to order new supplies and manage relationships with vendors.<br><br>Assist in the setup and preparation of new equipment, including software installations, configurations, and updates.<br><br>Issue IT supplies and equipment to staff, maintaining accurate and up-to-date records of issuance and return.<br><br>Ensure the secure and orderly storage of all IT items in the store.<br><br>Handle returns of faulty items to manufacturers for repair or replacement.<br><br>Support the disposal and recycling of obsolete or broken IT equipment in accordance with company policies and environmental regulations.<br><br>Qualifications<br><br>Required Knowledge and experience:<br><br>Minimum Five years’ experience in large scale store for IT<br><br>IT Assets Management<br><br>Managing and maintaining IT users assists via asset management system provided by MOPH and as per MOPH standards.<br><br>Assign IT assets to MOPH users and update all users IT asset movement.<br><br>Establish a secure process for data wiping and proper disposal of devices at the end of their useful life to prevent data breaches.<br><br>Experience in Using ITSM or Ticketing<br><br>Excellent in handling Incidents, Change Management, Request for fulfillment Processes<br><br>Excellent Knowledge in handling SLA Time (Response, Escalate, Notify , Resolution)<br><br>At least ITIL V3 or V4 Certified<br><br>Have IT Hardware Certificate<br><br>Excellent Knowledge in writing email, answer phone, Call center capability<br><br>Excellent organizational and time management skills.<br><br>Strong communication and interpersonal skills for interacting with staff and vendors.<br><br>Attention to detail and problem-solving skills.<br><br>Ability to physically handle IT equipment and supplies, including lifting, moving, and sorting items.<br><br>Required<br><br>Bachelor's degree in Computer Science, Information Technology, or a related field.<br><br>ITIL Foundation V3 or V4 certification.<br><br>Fluency in English (written and spoken).<br><br>Preferred<br><br>Cisco Certified Network Associate (CCNA).<br><br>Microsoft Certified Solutions Associate (MCSA).<br><br>Comp TIA Security+.<br><br>Comp TIA Network+.<br><br>Comp TIA Systems+.<br><br>Cloud Foundation certification or equivalent.<br><br>International Computer Driving License (ICDL).<br><br>Fluency in Arabic (written and spoken).<br><br>Fluency in Hindi (written and spoken).<br><br>Skills & Competencies<br><br>Technical Competencies<br><br>Strong understanding of IT infrastructure, networking, and system administration.<br><br>Knowledge of IT Service Management (ITIL) best practices.<br><br>Ability to troubleshoot and resolve technical issues efficiently.<br><br>Familiarity with cloud technologies and security best practices.

POSITION OBJECTIVE<br><br> The position is responsible for generating sales and deliver customer service at its best. Support the other operational duties such as housekeeping, visual presentation standards, etc. as assigned by the Store Management Team.<br><br>Key Responsibilities<br><br>Hospitality and Guest Service<br><br> Provides important visual cues for guests that make a positive first impression E.g. wearing proper career wear that is clean and neatly pressed, maintaining a clean parking lot/exterior and a clean and inviting dining room. Follows the guaranteed Always Fresh procedure to ensure coffee and products are always fresh and always accurate. Delivers consistent and outstanding guest service through friendly attitude, attentive behavior and strong product knowledge. Enhances the guest experience by following the S. E. T. Principles: Smile, Eye Contact, Thank You. Uses proper procedures to ensure the accuracy of every order for every guest. Ensures every guest receives a prompt and warm greeting within 5 seconds at front counter and drive-thru. Maintains speed of service targets by working efficiently with a sense of urgency to fill orders and meet guests’ needs. Promptly executes service recovery for any guest concerns or complaints by making it right with the guest, regardless of involvement in the issue. Listens carefully to guests and apologizes for the experience in the case of a complaint. Store Operations Follows all Operations standards and guidelines for preparation of products according to training and instructional materials provided. Prepares all products as required, following the order monitor to ensure the accuracy of every order. Communicates showcase and product needs to ensure proper product availability for guests. Regularly takes temperatures of the required products and records in the Time & Temperature Log. Policies and Procedures Participates in and attends all store meetings and other related functions. Follows all restaurant policies, procedures and standards. Maintains the front counter by keeping it clean, organized, stocked and ready for rush periods in the restaurant. Follows proper hand washing techniques and all sanitation guidelines; completes all sanitation tasks as outlined by the Store Manager. Cashiering Receives payment by cash, credit cards, vouchers or automatic debits. Issue receipts, refunds, or change to the customers correctly. Count money in the cash till at the beginning of the shifts to ensure that amount is correct and there is adequate change. Maintain clean and orderly checkout areas. Health & Safety Works in compliance with occupational health and safety legislation. Knows, understands and follows safe work practices and procedures. Uses or wears personal protective equipment or clothing as required. Reports all injuries/illnesses, accidents, unsafe conditions, security incidents and any contravention of health and safety legislation, policies and procedures to the Restaurant Manager or Restaurant Owner. Does not operate any equipment, machine, device or thing, or otherwise work in a manner that will endanger anyone.

POSITION OBJECTIVE<br><br> The position is responsible for generating sales and deliver customer service at its best. Support the other operational duties such as housekeeping, visual presentation standards, etc. as assigned by the Store Management Team.<br><br>Key Responsibilities<br><br>Hospitality and Guest Service<br><br> Provides important visual cues for guests that make a positive first impression E.g. wearing proper career wear that is clean and neatly pressed, maintaining a clean parking lot/exterior and a clean and inviting dining room. Follows the guaranteed Always Fresh procedure to ensure coffee and products are always fresh and always accurate. Delivers consistent and outstanding guest service through friendly attitude, attentive behavior and strong product knowledge. Enhances the guest experience by following the S. E. T. Principles: Smile, Eye Contact, Thank You. Uses proper procedures to ensure the accuracy of every order for every guest. Ensures every guest receives a prompt and warm greeting within 5 seconds at front counter and drive-thru. Maintains speed of service targets by working efficiently with a sense of urgency to fill orders and meet guests’ needs. Promptly executes service recovery for any guest concerns or complaints by making it right with the guest, regardless of involvement in the issue. Listens carefully to guests and apologizes for the experience in the case of a complaint. Store Operations Follows all Operations standards and guidelines for preparation of products according to training and instructional materials provided. Prepares all products as required, following the order monitor to ensure the accuracy of every order. Communicates showcase and product needs to ensure proper product availability for guests. Regularly takes temperatures of the required products and records in the Time & Temperature Log. Policies and Procedures Participates in and attends all store meetings and other related functions. Follows all restaurant policies, procedures and standards. Maintains the front counter by keeping it clean, organized, stocked and ready for rush periods in the restaurant. Follows proper hand washing techniques and all sanitation guidelines; completes all sanitation tasks as outlined by the Store Manager. Cashiering Receives payment by cash, credit cards, vouchers or automatic debits. Issue receipts, refunds, or change to the customers correctly. Count money in the cash till at the beginning of the shifts to ensure that amount is correct and there is adequate change. Maintain clean and orderly checkout areas. Health & Safety Works in compliance with occupational health and safety legislation. Knows, understands and follows safe work practices and procedures. Uses or wears personal protective equipment or clothing as required. Reports all injuries/illnesses, accidents, unsafe conditions, security incidents and any contravention of health and safety legislation, policies and procedures to the Restaurant Manager or Restaurant Owner. Does not operate any equipment, machine, device or thing, or otherwise work in a manner that will endanger anyone.

POSITION OBJECTIVE<br><br> The position is responsible for generating sales and deliver customer service at its best. Support the other operational duties such as housekeeping, visual presentation standards, etc. as assigned by the Store Management Team.<br><br>Key Responsibilities<br><br>Hospitality and Guest Service<br><br> Provides important visual cues for guests that make a positive first impression E.g. wearing proper career wear that is clean and neatly pressed, maintaining a clean parking lot/exterior and a clean and inviting dining room. Follows the guaranteed Always Fresh procedure to ensure coffee and products are always fresh and always accurate. Delivers consistent and outstanding guest service through friendly attitude, attentive behavior and strong product knowledge. Enhances the guest experience by following the S. E. T. Principles: Smile, Eye Contact, Thank You. Uses proper procedures to ensure the accuracy of every order for every guest. Ensures every guest receives a prompt and warm greeting within 5 seconds at front counter and drive-thru. Maintains speed of service targets by working efficiently with a sense of urgency to fill orders and meet guests’ needs. Promptly executes service recovery for any guest concerns or complaints by making it right with the guest, regardless of involvement in the issue. Listens carefully to guests and apologizes for the experience in the case of a complaint. Store Operations Follows all Operations standards and guidelines for preparation of products according to training and instructional materials provided. Prepares all products as required, following the order monitor to ensure the accuracy of every order. Communicates showcase and product needs to ensure proper product availability for guests. Regularly takes temperatures of the required products and records in the Time & Temperature Log. Policies and Procedures Participates in and attends all store meetings and other related functions. Follows all restaurant policies, procedures and standards. Maintains the front counter by keeping it clean, organized, stocked and ready for rush periods in the restaurant. Follows proper hand washing techniques and all sanitation guidelines; completes all sanitation tasks as outlined by the Store Manager. Cashiering Receives payment by cash, credit cards, vouchers or automatic debits. Issue receipts, refunds, or change to the customers correctly. Count money in the cash till at the beginning of the shifts to ensure that amount is correct and there is adequate change. Maintain clean and orderly checkout areas. Health & Safety Works in compliance with occupational health and safety legislation. Knows, understands and follows safe work practices and procedures. Uses or wears personal protective equipment or clothing as required. Reports all injuries/illnesses, accidents, unsafe conditions, security incidents and any contravention of health and safety legislation, policies and procedures to the Restaurant Manager or Restaurant Owner. Does not operate any equipment, machine, device or thing, or otherwise work in a manner that will endanger anyone.

Job Title: Senior Systems Analyst (Finance) Company: Nakilat Location: Doha, Qatar<br>Job Summary and Purpose Design, build, implement and improve the SAP finance solution services to all divisions within NAKILAT and its joint ventures. Leverage organizational capabilities and take up projects to automate the manual process with various SAP smart solutions.<br>Accountabilities<br>Key Accountabilities:SAP Implementation and Support:<br>Participate in leading SAP FSCM / SAP TRM / SAP FICO implementation and provide system support and continuous improvement for NAKILAT and its joint ventures. Provide post implementation supports to users in finance, controlling, project systems, treasury modules. Work with individual Finance division in providing SAP solutions or workaround. Provide support to Finance and Treasury divisions in carrying out their month end and year end closing activities successfully including GR/IR clearing, foreign currency valuations, internal order settlement, project settlement, corporate service allocation, customer and G/L balances carried forward, etc. Interact with SAP ABAP Team in designing the custom development or enhancement in SAP. Implement any legal requirements for the State of Qatar, for example, withholding tax. Work with SAP Basis team in designing roles and authorization matrix for the end user making sure that there is no conflict of duty and users are given authorization only to their respected company codes. Create SAP training materials and provide SAP training to end users. Provide new enhancements to existing finance processes. Provide a streamlined approach and solution with new enhancement to effectively and efficiently execute finance related processes/transactions. Design and configure new enhancements, RFC changes, break fix service desk tickets in SAP FSCM / SAP TRM. Assist in developing business analytical reports and dashboards using Power Bi / SAP Data Sphere.<br>Documentation: Maintain RFC (Request for Change) for production support related issues. Maintain Project documentations, Business process documents and configuration documentation.<br>Problem Management: Work closely with the business users & relevant department to analyze, investigate issues/problems & provide the solution. Document issues & solutions.<br>Qualifications, Experience and Job Skills<br>Qualifications: Bachelor’s degree in Computer Science, Business Administration, Accounting or in a related field Specialized certificates in FICO / FSCM module.<br>Experience:5-7 years of SAP experience of which a minimum of 3 years should be in a similar position, preferably in a similar industry<br>Job Specific Skills:Advanced knowledge of SAP FSCM / SAP TRM / SAP FICO modules. Knowledge in all sub-modules of Finance, with the support of strong experience with each sub-modules. Good client-facing, problem Solving and analytical skills. Good understanding of S4 solutions, BTP, Fiori Apps and integrations. Strong knowledge in business data modelling preferably using Data Sphere Good understanding of Dashboard reporting and ability to develop business analytical dashboards using Power Bi. Knowledge of SAP interfaces / integration with other technologies like Microsoft. Knowledge of Microsoft Power platform tools (Power Automate, Dataflows).

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

Overview<br><br>University of Doha for Science and Technology (UDST) was officially established by the Emiri Decision No13 of 2022, and it is the first national university specializing in academic applied, technical, and professional education in the State of Qatar. UDST has over 70 bachelor's and master's degree programs, diplomas, and certificates. The university houses 5 colleges: The College of Business, the College of Computing and Information Technology, the College of Engineering and Technology, the College of Health Sciences, and the College of General Education, in addition to specialized training centers for individuals and companies. UDST is recognized for its student-centered learning and state-of-the-art facilities. Its world-renowned faculty and researchers work on developing the students’ skills and help raise well-equipped graduates who proudly serve different sectors of the economy and contribute to achieving human, social, and economic development goals nationally and internationally.<br><br>With more than 700 staff and over 8,000 students, UDST is the destination of choice for applied and experiential learning. The University is recognized for its student-centered learning and state-of-the-art facilities. Our faculty are committed to delivering pedagogically-sound learning experiences that incorporate innovative learning technologies. Our aim is to enhance students’ skills and help develop talented graduates who can effectively contribute to a knowledge-based economy and make Qatar’s National Vision 2030 a reality.<br><br>Responsibilities<br><br> Duties & Responsibilities: <br><br>Create, copywrite and translate UDST content for different type of channels to ensure the consistency in the messages and tone of voice.<br><br>Contribute to accurate distribution of UDST news, publications and information through relevant internal and external online and offline media platforms to support communications initiatives.<br><br>Support in the writing and distribution of copy for publications, marketing and promotional materials and press releases for various print and social media channels to encourage awareness of UDST in alignment with communication strategies and plans.<br><br>Maintain strong working relationships with media stakeholders to encourage positive digital media, Tv, Radio, press coverage of UDST.<br><br>Facilitate response to media requests for interviews, photos and other information to ensure positive, accurate and timely promotion of UDST in line with UDST’s initiatives.<br><br>Support in media training for senior management and Academic Staff as required, to strengthen their role as UDST representatives on a need basis.<br><br>Assist in the research and writing of speaking notes for UDST executives and external guests for corporate events and press conferences.<br><br>Liaise with all business units to share information and identify the latest positive stories and accomplishments that can be communicated to strengthen brand positioning.<br><br>Qualifications<br><br> Education and Certifications: <br><br>Bachelor’s degree in Marketing and Communications required<br><br> Experience: <br><br>Minimum of 5 years of relevant experience in Communications, or related field<br><br> Language: <br><br>Fluency in written and spoken English and Arabic language required.

Lesha Bank is searching for the greatest talent and brightest minds to contribute to the current growth phase at our bank. We are looking for top-tier individuals who are passionate and hungry to add value from day one. Every day at Lesha is different, presenting a new challenge with the opportunity to contribute and grow. We are looking for an Associate – Private Wealth.<br><br>Reporting to: Chief Private Wealth Officer<br><br>Purpose of the Role<br><br>Support Relationship Directors in managing and growing client relationships, executing investment opportunities, onboarding new clients, and ensuring a high standard of client service across the Private Wealth business.<br><br>Key Responsibilities<br><br>Support Relationship Directors in managing High-Net-Worth (HNW) and Ultra-High-Net-Worth (UHNW) client portfolios. Participate in client meetings and assist in preparing investment proposals, presentations, and portfolio reviews , Managing emails, documentation, and meeting notes for Relationship Directors Running cash flow models and portfolio analysis in Excel Drive client onboarding and coordinate KYC and account-opening processes. Follow up with clients on investment opportunities, subscriptions, redemptions, and required documentation, Tracking client pipelines, investments, and follow-ups Coordinate with Investments, Operations, Compliance, Treasury, and Legal teams to ensure timely execution of client requests and transactions. Monitor client portfolios and assist in preparing periodic investment and performance reviews. Maintain strong client relationships and deliver exceptional client service standards. Support marketing and capital formation activities for private market and investment products. Mentor junior team members and provide support to the Client Services team when required.<br><br>Experience & Qualifications<br><br>4-7 years of experience in Private Banking, Wealth Management, Asset Management, or Corporate Banking. Strong understanding of investment products, capital markets, and alternative investments. Experience dealing with HNW and UHNW clients. Strong communication, relationship management, and presentation skills. Fluency in English; Arabic is preferred. Bachelor’s degree in Finance, Business Administration, Economics, or a related field. Preferred to hold Professional qualifications such as CFA, CISI, or equivalent are considered an advantage. Advanced Excel (cash flow modelling, portfolio tracking, scenario analysis) Strong Power Point skills (client-ready presentations) Familiarity with CRM systems and portfolio management tools Understanding of private markets / alternatives (preferred) Fluent in both Arabic and English, with strong verbal and written communication skills.<br><br>Success Factors<br><br>Strong ownership mindset with the ability to independently manage, track, and follow up on multiple client requests and deliverables. Exceptional attention to detail with a focus on accuracy across client materials, transactions, and reporting. Proven execution capability with the ability to deliver high-quality outputs under tight timelines. Effective coordination skills, ensuring seamless collaboration across internal teams and timely completion of client-related activities. Proactive attitude with strong follow-through, anticipating the needs of Relationship Directors and clients. Strong organizational and prioritization skills, with the ability to manage multiple tasks and maintain structured tracking of client pipelines, requests, and deliverables.

Lesha Bank is searching for the greatest talent and brightest minds to contribute to the current growth phase at our bank. We are looking for top-tier individuals who are passionate and hungry to add value from day one. Every day at Lesha is different, presenting a new challenge with the opportunity to contribute and grow. We are looking for an Associate – Private Wealth.<br><br>Reporting to: Chief Private Wealth Officer<br><br>Purpose of the Role<br><br>Support Relationship Directors in managing and growing client relationships, executing investment opportunities, onboarding new clients, and ensuring a high standard of client service across the Private Wealth business.<br><br>Key Responsibilities<br><br>Support Relationship Directors in managing High-Net-Worth (HNW) and Ultra-High-Net-Worth (UHNW) client portfolios. Participate in client meetings and assist in preparing investment proposals, presentations, and portfolio reviews , Managing emails, documentation, and meeting notes for Relationship Directors Running cash flow models and portfolio analysis in Excel Drive client onboarding and coordinate KYC and account-opening processes. Follow up with clients on investment opportunities, subscriptions, redemptions, and required documentation, Tracking client pipelines, investments, and follow-ups Coordinate with Investments, Operations, Compliance, Treasury, and Legal teams to ensure timely execution of client requests and transactions. Monitor client portfolios and assist in preparing periodic investment and performance reviews. Maintain strong client relationships and deliver exceptional client service standards. Support marketing and capital formation activities for private market and investment products. Mentor junior team members and provide support to the Client Services team when required.<br><br>Experience & Qualifications<br><br>4-7 years of experience in Private Banking, Wealth Management, Asset Management, or Corporate Banking. Strong understanding of investment products, capital markets, and alternative investments. Experience dealing with HNW and UHNW clients. Strong communication, relationship management, and presentation skills. Fluency in English; Arabic is preferred. Bachelor’s degree in Finance, Business Administration, Economics, or a related field. Preferred to hold Professional qualifications such as CFA, CISI, or equivalent are considered an advantage. Advanced Excel (cash flow modelling, portfolio tracking, scenario analysis) Strong Power Point skills (client-ready presentations) Familiarity with CRM systems and portfolio management tools Understanding of private markets / alternatives (preferred) Fluent in both Arabic and English, with strong verbal and written communication skills.<br><br>Success Factors<br><br>Strong ownership mindset with the ability to independently manage, track, and follow up on multiple client requests and deliverables. Exceptional attention to detail with a focus on accuracy across client materials, transactions, and reporting. Proven execution capability with the ability to deliver high-quality outputs under tight timelines. Effective coordination skills, ensuring seamless collaboration across internal teams and timely completion of client-related activities. Proactive attitude with strong follow-through, anticipating the needs of Relationship Directors and clients. Strong organizational and prioritization skills, with the ability to manage multiple tasks and maintain structured tracking of client pipelines, requests, and deliverables.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

POSITION OBJECTIVE<br><br> The position is responsible for generating sales and deliver customer service at its best. Support the other operational duties such as housekeeping, visual presentation standards, etc. as assigned by the Store Management Team.<br><br>Key Responsibilities<br><br>Hospitality and Guest Service<br><br> Provides important visual cues for guests that make a positive first impression E.g. wearing proper career wear that is clean and neatly pressed, maintaining a clean parking lot/exterior and a clean and inviting dining room. Follows the guaranteed Always Fresh procedure to ensure coffee and products are always fresh and always accurate. Delivers consistent and outstanding guest service through friendly attitude, attentive behavior and strong product knowledge. Enhances the guest experience by following the S. E. T. Principles: Smile, Eye Contact, Thank You. Uses proper procedures to ensure the accuracy of every order for every guest. Ensures every guest receives a prompt and warm greeting within 5 seconds at front counter and drive-thru. Maintains speed of service targets by working efficiently with a sense of urgency to fill orders and meet guests’ needs. Promptly executes service recovery for any guest concerns or complaints by making it right with the guest, regardless of involvement in the issue. Listens carefully to guests and apologizes for the experience in the case of a complaint. Store Operations Follows all Operations standards and guidelines for preparation of products according to training and instructional materials provided. Prepares all products as required, following the order monitor to ensure the accuracy of every order. Communicates showcase and product needs to ensure proper product availability for guests. Regularly takes temperatures of the required products and records in the Time & Temperature Log. Policies and Procedures Participates in and attends all store meetings and other related functions. Follows all restaurant policies, procedures and standards. Maintains the front counter by keeping it clean, organized, stocked and ready for rush periods in the restaurant. Follows proper hand washing techniques and all sanitation guidelines; completes all sanitation tasks as outlined by the Store Manager. Cashiering Receives payment by cash, credit cards, vouchers or automatic debits. Issue receipts, refunds, or change to the customers correctly. Count money in the cash till at the beginning of the shifts to ensure that amount is correct and there is adequate change. Maintain clean and orderly checkout areas. Health & Safety Works in compliance with occupational health and safety legislation. Knows, understands and follows safe work practices and procedures. Uses or wears personal protective equipment or clothing as required. Reports all injuries/illnesses, accidents, unsafe conditions, security incidents and any contravention of health and safety legislation, policies and procedures to the Restaurant Manager or Restaurant Owner. Does not operate any equipment, machine, device or thing, or otherwise work in a manner that will endanger anyone.

POSITION OBJECTIVE<br><br> The position is responsible for generating sales and deliver customer service at its best. Support the other operational duties such as housekeeping, visual presentation standards, etc. as assigned by the Store Management Team.<br><br>Key Responsibilities<br><br>Hospitality and Guest Service<br><br> Provides important visual cues for guests that make a positive first impression E.g. wearing proper career wear that is clean and neatly pressed, maintaining a clean parking lot/exterior and a clean and inviting dining room. Follows the guaranteed Always Fresh procedure to ensure coffee and products are always fresh and always accurate. Delivers consistent and outstanding guest service through friendly attitude, attentive behavior and strong product knowledge. Enhances the guest experience by following the S. E. T. Principles: Smile, Eye Contact, Thank You. Uses proper procedures to ensure the accuracy of every order for every guest. Ensures every guest receives a prompt and warm greeting within 5 seconds at front counter and drive-thru. Maintains speed of service targets by working efficiently with a sense of urgency to fill orders and meet guests’ needs. Promptly executes service recovery for any guest concerns or complaints by making it right with the guest, regardless of involvement in the issue. Listens carefully to guests and apologizes for the experience in the case of a complaint. Store Operations Follows all Operations standards and guidelines for preparation of products according to training and instructional materials provided. Prepares all products as required, following the order monitor to ensure the accuracy of every order. Communicates showcase and product needs to ensure proper product availability for guests. Regularly takes temperatures of the required products and records in the Time & Temperature Log. Policies and Procedures Participates in and attends all store meetings and other related functions. Follows all restaurant policies, procedures and standards. Maintains the front counter by keeping it clean, organized, stocked and ready for rush periods in the restaurant. Follows proper hand washing techniques and all sanitation guidelines; completes all sanitation tasks as outlined by the Store Manager. Cashiering Receives payment by cash, credit cards, vouchers or automatic debits. Issue receipts, refunds, or change to the customers correctly. Count money in the cash till at the beginning of the shifts to ensure that amount is correct and there is adequate change. Maintain clean and orderly checkout areas. Health & Safety Works in compliance with occupational health and safety legislation. Knows, understands and follows safe work practices and procedures. Uses or wears personal protective equipment or clothing as required. Reports all injuries/illnesses, accidents, unsafe conditions, security incidents and any contravention of health and safety legislation, policies and procedures to the Restaurant Manager or Restaurant Owner. Does not operate any equipment, machine, device or thing, or otherwise work in a manner that will endanger anyone.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants.</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

Lesha Bank is searching for the greatest talent and brightest minds to contribute to the current growth phase at our bank. We are looking for top-tier individuals who are passionate and hungry to add value from day one. Every day at Lesha is different, presenting a new challenge with the opportunity to contribute and grow. We are looking for an Associate – Private Wealth.<br>Reporting to: Chief Private Wealth Officer<br>Purpose of the Role Support Relationship Directors in managing and growing client relationships, executing investment opportunities, onboarding new clients, and ensuring a high standard of client service across the Private Wealth business.<br>Key Responsibilities Support Relationship Directors in managing High-Net-Worth (HNW) and Ultra-High-Net-Worth (UHNW) client portfolios. Participate in client meetings and assist in preparing investment proposals, presentations, and portfolio reviews , Managing emails, documentation, and meeting notes for Relationship Directors Running cash flow models and portfolio analysis in Excel Drive client onboarding and coordinate KYC and account-opening processes. Follow up with clients on investment opportunities, subscriptions, redemptions, and required documentation, Tracking client pipelines, investments, and follow-ups Coordinate with Investments, Operations, Compliance, Treasury, and Legal teams to ensure timely execution of client requests and transactions. Monitor client portfolios and assist in preparing periodic investment and performance reviews. Maintain strong client relationships and deliver exceptional client service standards. Support marketing and capital formation activities for private market and investment products. Mentor junior team members and provide support to the Client Services team when required.<br>Experience & Qualifications4-7 years of experience in Private Banking, Wealth Management, Asset Management, or Corporate Banking. Strong understanding of investment products, capital markets, and alternative investments. Experience dealing with HNW and UHNW clients. Strong communication, relationship management, and presentation skills. Fluency in English; Arabic is preferred. Bachelor’s degree in Finance, Business Administration, Economics, or a related field. Preferred to hold Professional qualifications such as CFA, CISI, or equivalent are considered an advantage. Advanced Excel (cash flow modelling, portfolio tracking, scenario analysis) Strong Power Point skills (client-ready presentations) Familiarity with CRM systems and portfolio management tools Understanding of private markets / alternatives (preferred) Fluent in both Arabic and English, with strong verbal and written communication skills.<br>Success Factors Strong ownership mindset with the ability to independently manage, track, and follow up on multiple client requests and deliverables. Exceptional attention to detail with a focus on accuracy across client materials, transactions, and reporting. Proven execution capability with the ability to deliver high-quality outputs under tight timelines. Effective coordination skills, ensuring seamless collaboration across internal teams and timely completion of client-related activities. Proactive attitude with strong follow-through, anticipating the needs of Relationship Directors and clients. Strong organizational and prioritization skills, with the ability to manage multiple tasks and maintain structured tracking of client pipelines, requests, and deliverables.

Additional Information<br><br>Job Number 26080088<br><br>Job Category Food and Beverage & Culinary<br><br>Location West Bay, Doha, Qatar, Qatar, 14435VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Our jobs aren’t just about serving guests during a banquet or event. Instead, we want to build an experience that is memorable and unique. Our Guest Event Experts are skilled in a wide range of event functions with responsibility for making sure the event is well-executed from start to finish. Whether setting up or breaking down the materials, transporting supplies, taking orders, interacting with guests, or anything in between, the Guest Event Expert makes transactions feel like part of the experience.<br><br>No matter what position you are in, there are a few things that are critical to success – creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Service Experts will be on their feet and moving around (stand, sit, or walk for an extended time) and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Event Experts – to get it right for our guests and our business each and every time.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D. equivalent.<br><br>Related Work Experience: Less than 1-year related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.