وظائف مهندس مواد

<p>Ensure the overall fire and life safety of the hotel in accordance with NFPA standards, local regulations, and hotel safety policies . Conduct daily inspections to identify and immediately address unsafe conditions, fire hazards, and unsafe staff practices throughout the property. Maintain and regularly inspect all fire protection and life safety systems , including fire hydrants, hose reels, extinguishers, alarms, emergency devices, and related equipment. Conduct periodic testing and inspection of fire safety equipment and emergency systems, ensuring accurate maintenance records and log entries. Ensure the serviceability of standby generators, emergency lighting, emergency exits, escape routes, and other critical emergency facilities . Inspect electrical installations, equipment, wiring, heaters, and other potential fire hazards to ensure safe operating conditions. Ensure appropriate fire and safety measures are implemented during hotel events, functions, and special activities . Conduct regular fire drills, safety meetings, and employee awareness training to maintain a strong safety culture across the hotel. Report unsafe conditions and required corrective actions to the relevant Heads of Department and Chief Engineer, and follow up until issues are resolved. Maintain comprehensive safety records, inspection reports, and incident documentation while demonstrating a professional Yes I Can! attitude at all times.</p><p><strong>Desired Candidate Profile</strong></p><p>Ensure the overall fire and life safety of the hotel in accordance with NFPA standards, local regulations, and hotel safety policies . Conduct daily inspections to identify and immediately address unsafe conditions, fire hazards, and unsafe staff practices throughout the property. Maintain and regularly inspect all fire protection and life safety systems , including fire hydrants, hose reels, extinguishers, alarms, emergency devices, and related equipment. Conduct periodic testing and inspection of fire safety equipment and emergency systems, ensuring accurate maintenance records and log entries. Ensure the serviceability of standby generators, emergency lighting, emergency exits, escape routes, and other critical emergency facilities . Inspect electrical installations, equipment, wiring, heaters, and other potential fire hazards to ensure safe operating conditions. Ensure appropriate fire and safety measures are implemented during hotel events, functions, and special activities . Conduct regular fire drills, safety meetings, and employee awareness training to maintain a strong safety culture across the hotel. Report unsafe conditions and required corrective actions to the relevant Heads of Department and Chief Engineer, and follow up until issues are resolved. Maintain comprehensive safety records, inspection reports, and incident documentation while demonstrating a professional Yes I Can! attitude at all times.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>MECHANICAL SUPERVISOR</b></p><p><br></p><p>Position: Mechanical Supervisor</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p><b><i>Key Responsibilities:</i></b></p><ul><li>Supervise and coordinate mechanical maintenance, installation, and troubleshooting activities in industrial facilities.</li><li>Lead technicians and subcontractors to ensure safe and efficient execution of work.</li><li>Plan preventive and corrective maintenance activities for rotating and static equipment.</li><li>Ensure compliance with HSE regulations, company procedures, and quality standards.</li><li>Prepare maintenance reports, work schedules, and technical documentation.</li><li>Coordinate with operations and engineering teams to minimize downtime.</li></ul><p><br></p><p><b><i>Requirements:</i></b></p><ul><li>Diploma or Bachelor's degree in Mechanical Engineering or related field.</li><li>Minimum 5 years of experience in industrial plants, utilities, manufacturing, oil &amp; gas, or infrastructure projects.</li><li>Strong knowledge of pumps, compressors, conveyors, hydraulic and pneumatic systems.</li><li>Experience in preventive and corrective maintenance programs.</li><li>Good leadership and communication skills.</li><li>Valid Qatar driving license is preferred.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul><p><br></p><p><br></p><p><b>MECHANICAL ENGINEER</b></p><p><br></p><p>Position: Mechanical Engineer</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p><b><i>Key Responsibilities:</i></b></p><ul><li>Design, monitor, and optimize mechanical systems and equipment within industrial facilities.</li><li>Prepare technical specifications, maintenance plans, and engineering reports.</li><li>Analyze equipment performance and implement improvement initiatives.</li><li>Support installation, commissioning, and troubleshooting activities.</li><li>Coordinate with multidisciplinary teams to ensure project and operational requirements are met.</li><li>Ensure compliance with industry standards and safety regulations.</li></ul><p><br></p><p><b><i>Requirements:</i></b></p><ul><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum 5 years of industrial experience in utilities, manufacturing, infrastructure, or oil &amp; gas sectors.</li><li>Strong knowledge of pumps, compressors, conveyors, HVAC, hydraulic, and pneumatic systems.</li><li>Experience with maintenance management systems and technical documentation.</li><li>Excellent analytical and problem-solving skills.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul><p><br></p><p><b><i>What We Offer:</i></b></p><ul><li>Competitive salary based on experience</li><li>Opportunity to work on international-standard projects</li><li>Career growth into Senior position roles</li><li>Hands-on training with advanced automated waste collection system technologies</li><li>Supportive engineering team environment</li></ul><p><br></p><p><b><i>About the Company:</i></b></p><p>Envac is a global, innovative leader in the automated waste collection industry, recognised as the true inventor of the pneumatic waste collection system. Through a commitment to innovation and ingenuity, Envac excels in designing and implementing advanced, resource-efficient waste management solutions. Our vision is to create smarter cities, improve the quality of life today, and help secure a greener planet for future generations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of pumps, compressors, conveyors, HVAC, hydraulic, and pneumatic systems.</li><li>Experience with maintenance management systems and technical documentation.</li><li>Excellent analytical and problem-solving skills.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul></div>

IT Security Specialist Job Summary<br><br>We are seeking an experienced IT Security Specialist to safeguard the organization's IT infrastructure by implementing security controls, monitoring threats, managing security solutions, responding to incidents, and ensuring compliance with cybersecurity standards and best practices.<br><br>Key Responsibilities<br><br>Monitor and respond to security incidents and cyber threats. Manage firewalls, SIEM, IDS/IPS, EDR, VPN, and endpoint security solutions. Conduct vulnerability assessments, risk assessments, and security audits. Implement and maintain cloud and network security controls. Ensure compliance with ISO 27001, NIST, and other security frameworks. Support business continuity, disaster recovery, and incident response activities. Collaborate with IT teams and vendors to enhance the organization's security posture.<br><br>Requirements<br><br>Bachelor's degree in Computer Science, Information Security, or a related field.5+ years of experience in IT Security or Cybersecurity. Hands-on experience with Microsoft Defender, Microsoft Sentinel, Azure Security, SIEM, firewalls, and vulnerability assessment tools. Strong knowledge of Windows Server security, network security, cloud security, and cybersecurity best practices.<br><br>Preferred Certifications<br><br>CISSP, CISM, or CEH. Cisco, Palo Alto, Microsoft Security, or other relevant vendor certifications.<br><br>Skills: network security,firewalls,cybersecurity,it security,hands-on security engineer

IT Security Specialist Job Summary<br><br>We are seeking an experienced IT Security Specialist to safeguard the organization's IT infrastructure by implementing security controls, monitoring threats, managing security solutions, responding to incidents, and ensuring compliance with cybersecurity standards and best practices.<br><br>Key Responsibilities<br><br>Monitor and respond to security incidents and cyber threats. Manage firewalls, SIEM, IDS/IPS, EDR, VPN, and endpoint security solutions. Conduct vulnerability assessments, risk assessments, and security audits. Implement and maintain cloud and network security controls. Ensure compliance with ISO 27001, NIST, and other security frameworks. Support business continuity, disaster recovery, and incident response activities. Collaborate with IT teams and vendors to enhance the organization's security posture.<br><br>Requirements<br><br>Bachelor's degree in Computer Science, Information Security, or a related field.5+ years of experience in IT Security or Cybersecurity. Hands-on experience with Microsoft Defender, Microsoft Sentinel, Azure Security, SIEM, firewalls, and vulnerability assessment tools. Strong knowledge of Windows Server security, network security, cloud security, and cybersecurity best practices.<br><br>Preferred Certifications<br><br>CISSP, CISM, or CEH. Cisco, Palo Alto, Microsoft Security, or other relevant vendor certifications.<br><br>Skills: network security,firewalls,cybersecurity,it security,hands-on security engineer

IT Security Specialist Job Summary<br><br>We are seeking an experienced IT Security Specialist to safeguard the organization's IT infrastructure by implementing security controls, monitoring threats, managing security solutions, responding to incidents, and ensuring compliance with cybersecurity standards and best practices.<br><br>Key Responsibilities<br><br>Monitor and respond to security incidents and cyber threats. Manage firewalls, SIEM, IDS/IPS, EDR, VPN, and endpoint security solutions. Conduct vulnerability assessments, risk assessments, and security audits. Implement and maintain cloud and network security controls. Ensure compliance with ISO 27001, NIST, and other security frameworks. Support business continuity, disaster recovery, and incident response activities. Collaborate with IT teams and vendors to enhance the organization's security posture.<br><br>Requirements<br><br>Bachelor's degree in Computer Science, Information Security, or a related field.5+ years of experience in IT Security or Cybersecurity. Hands-on experience with Microsoft Defender, Microsoft Sentinel, Azure Security, SIEM, firewalls, and vulnerability assessment tools. Strong knowledge of Windows Server security, network security, cloud security, and cybersecurity best practices.<br><br>Preferred Certifications<br><br>CISSP, CISM, or CEH. Cisco, Palo Alto, Microsoft Security, or other relevant vendor certifications.<br><br>Skills: network security,firewalls,cybersecurity,it security,hands-on security engineer

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Responsibilities</b></p><p><br></p><p>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence.&nbsp;&nbsp;</p><p>Supports Lead Engineer in monitoring quality activities and takes action where required.&nbsp;</p><p>Assist Project Team in project documentation such as proposals, estimates, budgets and schedules.</p><p>Manage process design and any design changes within budget and schedule.&nbsp;</p><p>Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures.</p><p>Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc.&nbsp;&nbsp;</p><p>Creates final documentation incorporating all relevant information and pursues customer approval.&nbsp;</p><p>Reviews documentation to assist others and reviews/authorizes work done by direct reports.&nbsp;</p><p>Evaluate new technology advancements against existing design standards and revise where applicable.&nbsp;</p><p>Identify and review new technology development which could be applicable in providing more cost-effective facilities.&nbsp;</p><p>Perform discipline specific engineering services such as:&nbsp;</p><p>Identify and report changes to project scope;&nbsp;</p><p>Contribute to appropriate studies, analyses and recommend actions;&nbsp;</p><p>Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports;&nbsp;</p><p>Provide assistance during procurement, construction and commissioning activities.&nbsp;</p><p>Quality Assurance:</p><p><br></p><p>Responsible for working within the provisions and guidelines of the Quality Assurance systems.</p><p>Safety:</p><p><br></p><p>Responsible for personal safety safe working practices. Understand and follow OH&amp;S procedures.</p><p>Promoting health, safety and environmental awareness.</p><p>Industry Specific Experience:&nbsp;</p><p><br></p><p>Must have process design in onshore/offshore oil &amp; gas industry in a brownfield environment with focus on rotating equipments.&nbsp;</p><p>FEED and detailed engineering experience essential.&nbsp;</p><p>Decent experience in an engineering consultancy in a multidiscipline environment is essential.&nbsp;</p><p>Education – Qualifications, Accreditation, Training:</p><p><br></p><p>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university.</p><p>MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.</p><p>Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage&nbsp;</p><p>IT Skills:&nbsp;</p><p><br></p><p>Simulations&nbsp;</p><p><br></p><p>Aspen suite, Hysys, Pipesys, FlareNet</p><p>PRO-II&nbsp;</p><p>Flow Assurance&nbsp;</p><p><br></p><p>PipeNet&nbsp;</p><p>Pipesim&nbsp;</p><p>PVTSim/OLGA&nbsp;</p><p>PipePhase&nbsp;</p><p>TLNET&nbsp;</p><p>Fathom</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Follow up EPCC Contractor/Subcontractors with regard to interpretation and proper implementation of the technical content of the EPCC Contract documents. Follow up and report on the progress including detection of deviation from the schedule. Assist Lead Engineer in coordination of the discipline scope and activity towards COMPANY. Ensure that EPCC Contractor schedule is commissioned driven and follow up schedule and progress including detection of deviation from the EPCC Contract schedule. Follow up and monitor all relevant critical path activities throughout the Project execution. Verify status of Mechanical Completion activities. Verify EPCC in accordance with the requirements of EPCC Contract. Assists the Commissioning team in Punch items categorization, tracking and resolution for systems mechanical completion. Verify and close punch items in area of responsibility. Coordinate identification, compilation and implementation of all lessons learned. Support Lead Mechanical Engineer in coordinating the training of the Company team to enable them to undertake the commissioning, start up and installation, of the plant within discipline scope. Ensure that all implemented Project process technologies and its operation aspects are proven. Participate and support in verifying the Performance Test of the Project when performed under the responsibility and supervision of EPCC Contractor and confirm full compliance with the requirements set forth in EPCC Contract. Ensure all tie-ins within discipline scope required from the company are completed and ready for Hook-up/installation in accordance with schedule/quality. Identify, report and follow up risks within own area of responsibility.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in relevant discipline from a recognized University. 7+ years direct and relevant discipline experience in large EPCC Projects related to oil/gas or petrochemical or fertilizer industry. Experience in Ammonia and Urea Fertilizer Projects/Plants is an advantage. Computer Literacy (Ability to Operate Standard Computer Software Applications). Function-Specific Specialized Computer Applications. Financial Management. Knowledge of internal processes, standards, policies &amp; procedures. Knowledge of legal and industry standard requirements. Languages (Ability to communicate effectively in written spoken English/Arabic). Manual Dexterity. Numeracy (Ability to handle calculations and applied statistics). Office Equipment Operation. Oral Communication. Professional and Technical Expertise. Project Management. Quality Assurance/Improvement. Written Communication (Ability to write business or technical reports). Negotiating Skills. Facilitation Skills (Ability to run training or brainstorming sessions).</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervises all design, procurement, factory testing, installation &amp; alignment, commissioning, and testing activities related to vessel machinery, equipment, and systems</p> <p>Reviews and approves the design, drawings and analysis work to ensure design and construction activities of Shipyards/Owners are in compliance with specification requirements, good engineering practice and Rules, Regulations &amp; standards</p> <p>Ensure drawing review and approval are done within the contractual time and document any changes to vessel drawings upon completion of modifications by following PMOC process</p> <p>Review Ship Builder's project plans and work specification for each individual vessel and provide technical support to procurement and construction activities</p> <p>Develop and monitor project metrics, manage the collection of project data and provide regular reports to project management</p> <p>Supports project management with preparation and implementation of Project Execution Plan (PEP) and other requirements</p> <p>Attend Technical and Construction Progress Meetings with Shipyard/Owner</p> <p>Promptly report to the Management any irregularities or concerns related to Safety, Quality or any other areas which may impact the project execution or compromise compliance with Company Standards and Policies.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Degree in Marine Engineering, Naval Architecture or adjacent field</p> <p>STCW license (active or expired) as Chief Engineer, Second Engineer, or Officer in Charge of an Engineering Watch</p> <p>Minimum 15 years' experience in related field and project planning &amp; coordination of activities within the Oil &amp; Gas and Marine Construction Industry, including minimum 3 years' experience in the design of LNG carriers and minimum 3 years' experience either (a) on a shipyard site team as either an owner's or charterer's representative, or (b) as an employee in the design department or commissioning department of a shipyard</p> <p>Minimum 3 years' experience sailing aboard oceangoing vessels in the Engine Department, in either a licensed or unlicensed role</p> <p>Experience as an owner's or charterer's representative in any of the (4) Shipyards, or as an employee in the design department of any of the (4) Shipyards</p> <p>Experience sailing on LNG carriers</p> <p>A thorough knowledge of applicable regulations, Class Rules, and industry codes and standards as relates to this field of expertise</p> <p>Familiar with Piping, Structural, Electrical &amp; Automation, standards, design and conversions</p> <p>Familiarity with Shipping related documents</p> <p>Advanced computer literacy in Microsoft Office (Word, Excel and PowerPoint) and PC Skills, proficient in design software</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Highway Design Engineer Qatar Parsons is looking for an amazingly talented Highway Design Engineer to join our team! In this role, you will play a key technical role in the planning and design of complex road and highway projects, developing horizontal and vertical alignments, junction layouts, and construction details that directly shape critical infrastructure and improve mobility, safety, and connectivity for the communities we serve.</p><p>What You ll Be Doing</p><ul><li>Provide project design civil engineering services, including preparation of project study reports, project reports, geometric approval drawings, plans, specifications, and estimates.</li><li>Design horizontal and vertical roadway alignments and super-elevation diagrams in accordance with applicable standards.</li><li>Perform quantity calculations and prepare project estimates.</li><li>Develop details for construction, detours, signing, and marking.</li><li>Coordinate with the project team and interdisciplinary technical personnel to ensure integrated design solutions.</li><li>Assist senior staff in completing project deliverables and meeting project requirements.</li><li>Provide support for other engineering activities as required.</li><li>Provide input and technical guidance to CAD Designers/Drafters, Designers, and lower-level Engineers working on the same project.</li><li>Perform other responsibilities associated with this position as may be appropriate.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Degree in Civil Engineering from an accredited university.</li><li>Approximately 3-5 years of relevant experience in the field of highway and roadway design.</li><li>Hands-on experience using Autodesk Civil 3D, MicroStation, and GEOPAK (or similar) for road and highway design.</li><li>Thorough working knowledge of AASHTO design guidelines.</li><li>Roadway and highway design experience on projects in Qatar.</li><li>Experience in geometric alignment design (horizontal and vertical).</li><li>MME certified.</li><li>Fluent in English, both written and verbal, with experience in composing correspondence related to your responsibilities.</li><li>Roadway &amp; Highway design experience in Qatar projects.</li><li>Proficiency in the utilization of standard engineering theories and practices and company procedures.</li><li>Experience with CAE (computer-aided engineering) and CAD (computer-aided design) applications beyond basic drafting.</li><li>Experience working within multidisciplinary design teams and coordinating with CAD/BIM production staff.</li><li>Strong problem-solving skills and the ability to work independently under the guidance of senior engineers.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>To work a MECHANICAL FOREMAN.</p><p><b>Knowledge &amp; Qualification:</b></p><p>ITI or Diploma in Mechanical with min 7 to 10 Yrs experience in O&amp;G Project.</p><p><b>Role &amp; Responsibilities:</b></p><p>ITI or Diploma in Mechanical with min 7 to 10 Yrs experience in O&amp;G Project.</p><p>Must be capable of executing QA/QC and HSE compliance audits on site, procedures and working instructions.</p><p>Must be able to make sound assessment of sealing surfaces. Must be able to read and draw isometric drawings.</p><p>Must be able to lead a group of Junior Technicians and or Helpers Must have a fairly good knowledge &amp; understanding of insulation cladding fabrication.</p><p>Must be able to understand job tasks and take verbal or written instruction.</p><p>Must be able to organize the materials, services and equipment for his job. Must have experience in and be able to plan well in advance.</p><p>Plan the sequence of jobs (preparation, lifting, installation, welding, etc) according to the job requirement and available facilities.</p><p>Prepare stores requisition, obtains approval and arrange for collection. Receives planned maintenance schedule and job cards from supervisors and arrange for implementation in liaison with operations.</p><p>Controls the vessel/ barge/ super complex store with first line spare and materials.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>ITI or Diploma in Mechanical with min 7 to 10 Yrs experience in O&amp;G Project.</li><li>Must be capable of executing QA/QC and HSE compliance audits on site, procedures and working instructions.</li><li>Must be able to make sound assessment of sealing surfaces.</li><li>Must be able to read and draw isometric drawings.</li><li>Must be able to lead a group of Junior Technicians and or Helpers</li><li>Must have a fairly good knowledge &amp; understanding of insulation cladding fabrication.</li><li>Must be able to understand job tasks and take verbal or written instruction.</li><li>Must be able to organize the materials, services and equipment for his job.</li><li>Must have experience in and be able to plan well in advance.</li><li>Plan the sequence of jobs (preparation, lifting, installation, welding, etc) according to the job requirement and available facilities.</li><li>Prepare stores requisition, obtains approval and arrange for collection.</li><li>Receives planned maintenance schedule and job cards from supervisors and arrange for implementation in liaison with operations.</li><li>Controls the vessel/ barge/ super complex store with first line spare and materials.</li></ul><p></p></section>

<p>Structural Engineer (Kahramaa Project, Qatar) • Bachelor's Degree in Structural Engineering. • Minimum 10 years of relevant experience. • Strong structural design experience is mandatory, particularly in the design of Thrust Blocks. • Immediate joiners with a valid Qatar ID (QID) are preferred. • UPDA certification is not mandatory, but candidates holding UPDA will be given preference.</p><p>• Bachelor's Degree in Structural Engineering. • Minimum 10 years of relevant experience. • UPDA certification • Experience in Kharama project Strong structural design experience is mandatory, particularly in the design of Thrust Blocks.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Senior Engineer (Key Customer):</p></li></ol><p>Bachelor's degree in electrical engineering or a related discipline.</p><p>Minimum 12 years of relevant experience in electrical engineering, preferably within utility key accounts or bulk supply operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Strong understanding of electrical distribution and metering systems. Ability to manage key accounts and client relationships effectively. Knowledge of electrical safety standards, regulations, and utility practices. Good communication, coordination, and problem-solving skills. Written and Spoken English is essential; Arabic is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Senior Engineer (Key Customer):</p></li></ol><p>Bachelor's degree in electrical engineering or a related discipline.</p><p>Minimum 12 years of relevant experience in electrical engineering, preferably within utility key accounts or bulk supply operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Strong understanding of electrical distribution and metering systems. Ability to manage key accounts and client relationships effectively. Knowledge of electrical safety standards, regulations, and utility practices. Good communication, coordination, and problem-solving skills. Written and Spoken English is essential; Arabic is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Senior Engineer (Key Customer):</p></li></ol><p>Bachelor's degree in electrical engineering or a related discipline.</p><p>Minimum 12 years of relevant experience in electrical engineering, preferably within utility key accounts or bulk supply operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Strong understanding of electrical distribution and metering systems. Ability to manage key accounts and client relationships effectively. Knowledge of electrical safety standards, regulations, and utility practices. Good communication, coordination, and problem-solving skills. Written and Spoken English is essential; Arabic is preferred.</p><p></p></section>

<p>The Sales &amp; Marketing Engineer will be responsible for promotion, sales, Business Development Manager (BDM) and Customer Relationship Management (CRM) activities within the Oil &amp; Gas sector, specifically targeting Qatar Oil &amp; Gas Companies such as Asghal and Qatar Energy. The role involves securing new agencies and conducting market research.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Candidate profile:</p><ul><li>Salary: QR 4500 - 5000</li><li>Free Accommodation</li><li>Online Interview</li><li>Work VISA</li><li>Qatar experience in Oil &amp; Gas Companies</li><li>GCC Driving Licence</li><li>Send CV &amp; Document to EMAIL_ADDRESS</li><li>WhatsApp: PHONE_NUMBER</li></ul>

<p>Candidates should hold a recognized qualification in Marine Engineering and must hold a valid Certificate of Competency (CoC) as Officer in Charge of an Engineering Watch (OICEW) in accordance with STCW Convention Regulation III/1.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates should have sailing experience as a 4th Engineer or have completed a Cadetship on oil tankers, LNG carriers, and/or LPG carriers. Candidates should hold valid STCW certificates, possess good English communication skills, and meet the medical and certification requirements in accordance with international and company standards.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Overview</b> <br>Provide specialised maritime expertise for the activities of the LNG Shipping Assurance team within the LNG Shipping Department of the QatarEnergy Marketing Directorate to ensure safe, reliable and efficient transportation of LNG to meet contractual obligations to QatarEnergy LNG Marketing customers.<br> <br> <b>Experience</b> <br>Minimum 8 years' experience in marine industry (vetting, operations, terminals, incident investigations, and other marine functions).<br> <br> <b>Qualifications</b> <br>Class 1 Marine Certificate of Competency (Master Mariner or Chief Engineer) or Bachelor's degree in Business, Engineering, Marine Studies or similar.</div></section>

<p>Ensure Implementation of Project QA/QC requirements at project site and suppliers / subcontractor's works complying to project specification and other technical requirements.</p><p>Organize Pre-Activity Review meetings, attend Quality Walk through and QA/QC Weekly meetings.</p><p>Undertake surveillance of on-site and off-site Structural / Piping / Pipeline shop and Field fabrication / Equipment Erection and associated inspection &amp; testing activities, Surface Preparation &amp; Painting activities, identify potential or actual non-conformances and direct contractor in taking necessary Correction, corrective and preventive actions.</p><p>Initiate or ensure initiation of NCRs for the recurrent surveillance observations and non-conformities and coordinate / follow-up for RCA / Correction / Corrective /Preventive action proposals and timely close out.</p><p>Monitor the progressive compilation of Material Test Certificates and Construction Records and their traceability.</p><p>Monitor and verify the implementation of Preservation Management System.</p><p>Ensure the Contractors maintain, update, and publish the IMTE Registers on regular basis and calibration records maintained.</p><p>Ensure appropriate Systems / Processes / Procedures / Computer data base established by Contractor to maintain the Inspection and Test status during pre-fabrication, field erection, testing and statistical analysis of the data.</p><p>Monitor the KPIs, Special processes and personnel performance.</p><p>Participate in Project QHSE audits and Pre-Qualification Audits of Vend.rs / Suppliers / Sub-Contractors. Conduct ITP / QCP / MS / Process / Activity level compliance audits / Checks.</p><p>Monitor Contactor/Sub-Contractor/Third party inspectors &amp; Engineers and Subordinates, performance, provides necessary support / guidance and reports to functional supervisor.</p><p>Implement and enforce the elements of Company Quality Management System requirements applicable to your function.</p><p>Exposed to Construction Site and Prevailing Climatic Conditions at least 50% of time.</p><p>Ensure own safety and the safety of others who may be affected by Company business, whether the activity is under direct control or not.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in mechanical engineering (or Equivalent) from a recognized university.</p><p>IRCA Certified QMS Lead Auditor.</p><p>Welding Inspector Certification (CSWIP 3.1 / AWS-CWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP) is a must. Equivalent International Certifications acceptable.</p><p>Having IIW-Welding Engineer / NDT level-3 and Certification in advanced NDT (PAUT, TOFD, Auto UT etc.,) will be an advantage.</p><p>Professional membership / affiliations with recognized chartered or other professional institutions like ASNT / AWS / TWI / NACE / ASQ-CMQ&amp;OE, MCQI-CQP or similar is desirable.</p><p>15 years' experience in the construction of major Green field or Brown-field Process Plants in Oil &amp; Gas industry including large scale solar (Photovoltaic) projects.</p><p>Worked with major EPIC Contractors / End User in similar position in major projects with overall responsibility for the Quality of Piping / Mechanical discipline Construction and Commissioning activities. Sound working knowledge on QA/QC aspects, testing requirements and acceptance criteria related various Piping systems and Rotating / Stating Equipment and managing overall discipline's QA/QC aspects in major Oil and Gas Projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Full Stack Engineer (12 Months Contract) <p>10+ years of technical experience in designing, developing and</p><br> <p>maintaining programs and applications from front end to back end.</p><br> <p> Working with front-end frameworks such as React, Angular, or Vue.js.</p><br> <p> Building and integrating back-end services, APIs, and databases.</p><br> <p>RESTful endpoints in Express, with robust database access, connectionpool</p><br> <p>resilience, request validation, and server-side error handling.</p><br> <p> Using REST APIs or GraphQL to connect front-end and back-end</p><br> <p>systems.</p><br> <p> Working with databases such as SQL Server, PostgreSQL or MySQL.</p><br> <br> <br> </div>

<p>Candidates with oil tanker experience but no LNG experience may be considered under our cross-training program. candidates should hold valid STCW certificates, possess good English communication skills, and meet the medical and certification requirements in accordance with international and company standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates should hold a recognized qualification in Marine Engineering and must hold a valid Certificate of Competency (CoC) as Officer in Charge of an Engineering Watch (OICEW) in accordance with STCW Convention Regulation III/1. Minimum three (2) completed trips as a 3rd Engineer.</p>