وظائف مهندس مواد

<p>Job Summary The Inspector QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements. This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization s commitment to delivering high-quality products and services. Roles &amp; Responsibilities Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications. Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements. Verify material test certificates (MTCs) and maintain traceability. Support pressure tests, NDT activities, and dimensional inspections. Ensure all measuring and testing equipment are properly calibrated and used as per defined standards. Prepare inspection reports, checklists, and non-conformance reports (NCRs). Maintain accurate and detailed QA/QC records for traceability and audit purposes. Identify and report deviations or non-conformances to the QA/QC Engineer. Assist in root cause analysis and follow-up of corrective and preventive actions. Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards. Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented. Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements. Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company s HSE standards QHSE Responsibilities Comply with all QHSE standards, policies, and procedures relevant to your work. Actively participate in QHSE meetings and complete all required safety inductions and trainings. Identify and report unsafe conditions; take corrective action where possible within your scope. Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly. Support a safe work environment by cooperating with safety practices and encouraging others to do the same. Refer to the OHSMS Manual, Section 4.4.1, for further clarification on individual QHSE responsibilities and accountability.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Certificates</strong> Diploma or Bachelor's Degree in Mechanical or Electrical Engineering. NDT Level II (UT/RT/PT/MT) preferred. <strong>Experience</strong> Minimum 8 years of working experience as inspection personnel for Oil &amp; Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNG. Familiar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079. etc.). Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Senior Civil / Structural Engineer</strong><br> <strong>Qualifications</strong><ul><li>Bachelor's Degree in Civil Engineering (Master's in Structural Engineering preferred).</li><li>Professional Engineer registration is an advantage.</li></ul><strong>Experience</strong><ul><li>10+ years in structural design and construction of large buildings and infrastructure projects.</li><li>Minimum 6 years in a supervisory role.</li><li>Experience in structural engineering, project management, and construction activities.</li><li>Knowledge of BS, EN, ASTM, and relevant industry standards.</li><li>Experience with water-retaining structures, dewatering, commissioning, and handover activities preferred.</li><li>Proficient in MS Office and structural design software.</li><li>Strong communication and technical reporting skills.</li></ul><strong>Key Responsibilities</strong><ul><li>Provide civil/structural engineering support across project phases.</li><li>Review and approve drawings, specifications, calculations, materials, and method statements.</li><li>Ensure compliance with project requirements, codes, and engineering standards.</li><li>Support pre-commissioning, commissioning, and handover activities.</li><li>Evaluate technical bids, variations, and engineering proposals.</li><li>Coordinate with consultants, contractors, and multidisciplinary engineering teams.</li><li>Resolve technical issues and provide engineering recommendations.</li><li>Support project delivery with a focus on safety, quality, schedule, and cost.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>We are seeking a detail-oriented QS Engineer to manage all cost and contractual aspects of construction and marine projects. The ideal candidate will be responsible for estimating, cost control, budgeting, tendering, contract administration, and variation management to ensure project financial objectives are met. Key Responsibilities: Prepare cost estimates and bills of quantities (BOQ) based on project drawings and specifications Conduct material take-offs for civil, structural, and marine works (piling, excavation, concrete, steel, rock filling, etc.) Assist in preparing tender documents, bid evaluations, and subcontractor negotiations Monitor project costs against budgets; prepare cost reports and forecasts Measure and value work done for progress payments and interim certificates Prepare and evaluate variation orders, claims, and change orders Assist in contract administration including FIDIC or other standard contract forms Review and verify subcontractor invoices and payment applications Maintain cost database and historical pricing for future projects Participate in value engineering exercises to optimize project costs Coordinate with project managers, engineers, and procurement for cost-related matters Prepare final accounts and assist in project close-out Ensure compliance with company financial policies and procedures</p><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or related field Minimum 5+ years of experience as a QS Engineer in construction, marine, or infrastructure projects Strong knowledge of measurement standards (SMM7, CESMM, or POMI) Experience with cost estimation software (e.g., CostX, Candy, or similar) Familiarity with contract conditions (FIDIC, NEC) is preferred Proficiency in MS Excel, AutoCAD, and take-off software Professional certification (RICS, CIOB, or equivalent) is an advantage Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: Strong analytical and numerical abilities Attention to detail for measurements and calculations Good communication and negotiation skills Ability to work under pressure and meet deadlines Problem-solving for contractual and cost issues</p>

QC Inspector (Paint/Coating) – QATAR <br><br>Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.<br><br>Airswift is seeking for a QC Inspector (Paint/Coating) to work in Qatar with a major Oil & Gas Company.<br><br>Qualification<br><br>Qualification<br><br>Minimum High Technical School Certificate or equivalent. Painting/Coating certification from a recognized organization such as NACE, TWI, or equivalent. NACE Level II or BGAS-CSWIP Grade II certification is mandatory.<br><br>Experience<br><br>Minimum 10 years of relevant experience in the Oil & Gas Downstream Industry. Experience with international consultancy companies, third-party inspection/certification companies, EPIC contractors, or end users involved in major project execution is essential.<br><br>Primary Duties And Responsibilities<br><br>Ensure that the quality requirements for fabrication, construction, and installation activities, as detailed in approved Quality Control procedures and plans, are implemented in accordance with approved project documents. Ensure that Contractors, Subcontractors, and Vendors have competent resources, apply internationally accepted practices, and deliver products that comply with corporate and project quality requirements. Monitor all site and fabrication yard coating activities and ensure all welded joints are coated in accordance with approved standards and specifications. Carry out systematic inspections at each stage of surface preparation, painting, wrapping, and repair activities. Witness painter and blaster qualification tests conducted by paint manufacturers and evaluate associated test results. Verify implementation of the approved inspection system for surface preparation, painting, and wrapping activities through established Hold Points within the work schedule. Ensure work does not proceed beyond Hold Points without formal approval from the responsible Project Engineer. Monitor in-process inspections of offshore steel structure fabrication and topside facility construction at contractor fabrication yards and verify compliance with corporate standards, project specifications, and applicable international codes and standards. Report daily to the QA/QC Engineer and advise on contractor compliance with contractual procedures, specifications, quality standards, and any issues affecting quality performance. Ensure coating inspection activities are performed in accordance with approved Inspection and Test Plans (ITPs), project specifications, and relevant international standards. Review coating procedures, method statements, quality records, and inspection reports for compliance with project requirements. Witness and verify environmental condition measurements, surface preparation inspections, coating application inspections, dry film thickness (DFT) measurements, adhesion testing, holiday testing, and coating repair inspections. Verify that painting and coating materials are stored, handled, and applied according to manufacturer recommendations and project specifications. Monitor and verify contractor compliance with quality requirements for protective coating systems applied to onshore and offshore facilities. Ensure all inspection records, reports, and quality documentation are completed accurately and maintained in accordance with project quality requirements. Identify quality issues and non-conformances and support the implementation of corrective and preventive actions. Participate in site audits, surveillance activities, and quality assessments as required. Ensure compliance with project HSE requirements during all coating inspection activities.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>We are seeking an experienced <b>Civil Engineer</b> with practical experience in warehouse construction and industrial building projects. The successful candidate will be responsible for supervising and coordinating civil construction activities, ensuring that all works are completed safely, on schedule, within budget, and in accordance with approved drawings, specifications, quality standards, and applicable local regulations.</p><p>The role requires strong site-management skills and experience in foundations, concrete works, structural works, flooring, drainage, external works, and coordination with MEP and other project teams.</p><p><br></p><p>Key Responsibilities</p><ul><li>Review project drawings, specifications, method statements, material submittals, and approved construction documents.</li><li>Plan, supervise, and coordinate civil works for warehouses, industrial buildings, storage facilities, and related infrastructure.</li><li>Manage site activities including excavation, earthworks, soil preparation, backfilling, compaction, foundations, concrete works, blockwork, plastering, waterproofing, and finishing works.</li><li>Supervise construction of warehouse slabs, heavy-duty industrial flooring, loading bays, ramps, dock levellers, parking areas, and vehicle access roads.</li><li>Coordinate the installation of structural steel, precast elements, mezzanine floors, cladding supports, and other warehouse-related structures.</li><li>Ensure that construction activities are carried out in accordance with approved drawings, project specifications, and engineering standards.</li><li>Coordinate with consultants, clients, subcontractors, suppliers, surveyors, MEP teams, and other stakeholders.</li><li>Check setting-out, levels, dimensions, line, alignment, and elevations before and during construction.</li><li>Monitor the quality of concrete, reinforcement, formwork, waterproofing, flooring, drainage, and other civil works.</li><li>Inspect delivered materials and ensure that only approved materials are used at the project site.</li><li>Prepare and submit inspection requests, material inspection requests, work completion records, and other quality documents.</li><li>Coordinate testing, including soil compaction tests, concrete cube tests, water tests, and other required inspections.</li><li>Monitor daily progress and prepare daily, weekly, and monthly reports.</li><li>Assist in preparing work programmes, resource plans, manpower requirements, and material schedules.</li><li>Identify delays, technical issues, variations, and potential risks, and report them promptly to the Project Manager.</li><li>Supervise subcontractors and ensure that their work meets the required quality, safety, and programme standards.</li><li>Ensure proper coordination between civil works and warehouse systems such as racking, fire protection, electrical services, HVAC, plumbing, and drainage.</li><li>Assist with quantity measurements, valuation of completed works, variation orders, and subcontractor payment evaluations.</li><li>Review and maintain as-built drawings, inspection records, test reports, snag lists, and handover documentation.</li><li>Conduct inspections, coordinate snagging activities, and support the successful completion and handover of the project.</li><li>Ensure compliance with company policies, project requirements, health and safety procedures, and local authority regulations.</li></ul><p>Warehouse Construction Experience</p><p>The candidate should have practical knowledge of the following:</p><ul><li>Warehouse foundations and reinforced-concrete structures.</li><li>Large-area concrete slabs and industrial flooring.</li><li>Heavy-duty floors designed for forklifts, storage racks, and high-load operations.</li><li>Loading docks, ramps, truck yards, and service roads.</li><li>Pre-engineered metal buildings and structural steel systems.</li><li>Precast concrete components and steel-frame warehouses.</li><li>Mezzanine floors, platforms, stairs, handrails, and access structures.</li><li>Stormwater drainage, underground utilities, manholes, and external infrastructure.</li><li>Waterproofing, expansion joints, joint sealants, and floor hardeners.</li><li>Coordination of civil works with racking systems and warehouse equipment.</li><li>Warehouse extensions, refurbishment, maintenance, and modification works.</li></ul><p>Qualifications</p><ul><li>Bachelor’s degree in Civil Engineering from a recognized university.</li><li>Valid professional engineering registration or accreditation, where required.</li><li>Minimum <b>5 years of civil engineering experience</b>, preferably including <b>3 years in warehouse, industrial, logistics, or commercial construction projects</b>.</li><li>Experience in Qatar or the GCC region is preferred.</li><li>Knowledge of local construction requirements, authority approvals, and relevant international standards.</li><li>Valid driving licence is preferred.</li></ul><p>Technical Skills</p><ul><li>Ability to read and interpret civil, structural, architectural, and infrastructure drawings.</li><li>Proficiency in AutoCAD and Microsoft Office, particularly Excel and Word.</li><li>Knowledge of Primavera P6 or Microsoft Project is an advantage.</li><li>Familiarity with quantity take-off, construction planning, material control, and progress measurement.</li><li>Understanding of concrete technology, reinforcement, formwork, structural steel, flooring, drainage, and waterproofing.</li><li>Ability to prepare method statements, inspection requests, technical reports, and site documentation.</li><li>Knowledge of quality-control systems and construction inspection procedures.</li><li>Understanding of health, safety, and environmental requirements.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong site supervision and project coordination skills.</p><p>Good communication and reporting ability.</p><p>Problem-solving and decision-making skills.</p><p>Ability to manage subcontractors and site teams.</p><p>Strong attention to detail.</p><p>Ability to work under pressure and meet deadlines.</p><p>Team-oriented and professionally disciplined.</p><p>Good organization and time-management skills.</p><p>Ability to coordinate multiple activities in an active construction environment.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Seeking an experienced Senior Architectural &amp; Fire Life Safety Engineer with 10+ years of experience in architectural supervision, fire and life safety compliance, and multidisciplinary coordination on large-scale, mission-critical developments. The role will be responsible for overseeing architectural and fire safety implementation for data center projects, ensuring compliance with design requirements, Civil Defense regulations, applicable codes, and industry best practices.</p><p>Your role</p><ul><li>Lead architectural supervision activities for data center construction projects, ensuring compliance with approved drawings, specifications, and project requirements.</li><li>Monitor architectural finishes, building envelope, façade systems, and external works to ensure quality and compliance standards are achieved.</li><li>Review and inspect fire and life safety installations to ensure conformity with design intent, applicable codes, and Civil Defense requirements.</li><li>Verify proper implementation of fire-rated walls, compartmentation systems, fire stopping materials, penetration sealing, and smoke containment measures.</li><li>Review and monitor escape routes, emergency exits, egress provisions, and occupant safety requirements throughout construction.</li><li>Coordinate with architects, MEP engineers, fire protection specialists, contractors, and authorities to resolve design and site-related issues.</li><li>Interface with Civil Defense and relevant authorities for inspections, approvals, testing, and certification requirements.</li><li>Review contractor submittals, material approvals, shop drawings, and method statements related to architectural and fire safety works.</li><li>Monitor façade and building envelope installations to ensure performance, constructability, and compliance with project specifications.</li><li>Conduct site inspections, quality audits, and compliance reviews, identifying non-conformities and recommending corrective actions.</li><li>Ensure coordination between architectural, structural, MEP, and fire protection systems to avoid clashes and interface issues.</li><li>Support testing, commissioning, integrated systems testing (IST), and readiness assessments related to fire and life safety systems.</li><li>Prepare inspection reports, technical observations, snagging reports, and progress updates for project management and clients.</li><li>Monitor contractor performance and ensure timely closure of architectural and fire safety-related observations.</li><li>Support project handover activities, final inspections, authority approvals, and closeout documentation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Architecture Engineering, Fire Engineering or equivalent.</li><li>UPDA/MMUP Grade A.</li><li>Fire/life safety &amp; QCDD-related experience.</li><li>Data Center Experience [at least 1 project is delivered in the last 5 years] is preferred.</li><li>10+ years of experience.</li><li>Architectural supervision, fire/life safety coordination, compartmentation, fire stopping, escape routes, Civil D fense interfaces, facade/envelope coordination and compliance review for complex buildings or data centres.</li></ul><p></p></section>

Overview<br><br>The Architectural Inspector is responsible for overseeing and ensuring that all architectural and fit-out works are executed in compliance with approved drawings, specifications, project quality standards, and authority requirements. The role involves close coordination with multidisciplinary teams to ensure high-quality finishes, proper installation, and timely completion of architectural elements in line with project goals.<br><br>Your role<br><br>Inspect architectural and finishing works including partitions, ceilings, raised floors, doors, fire-rated elements, waterproofing, and façade interfaces. Ensure works comply with approved drawings, method statements, specifications, and quality standards. Review and respond to WIRs, MIRs, and RFIs within defined timelines. Monitor workmanship, finishing quality, and installation practices on site. Coordinate with MEP, civil, and life safety teams to resolve interface issues. Support fire stopping inspections, access control coordination, and white space fit-out activities. Maintain inspection reports, snag lists, photographic records, and close-out documentation. Assist in snagging, punch list preparation, and verification of defect rectification. Participate in testing, commissioning readiness, and final handover inspections. Escalate quality, safety, and interface concerns to senior engineers and project management.<br><br>About You<br><br>Bachelor's degree in Architecture, Civil Engineering, or related discipline. Proven experience in architectural inspection, fit-out, or finishing works. Experience in data centre or mission-critical projects is preferred. Familiarity with QA/QC processes, WIR/MIR workflows, and inspection procedures. Knowledge of fire-rated systems, finishes, and building materials. UPDA certification preferred (Grade A is an advantage). Strong coordination and documentation skills.<br><br>Rewards & benefits<br><br>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.<br><br>This Includes<br><br>Tax-free salary. Life insurance coverage. Medical insurance. Annual leave balance. Company gratuity scheme. Discretionary bonus program. Annual flight contribution. Transportation & housing allowances. Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.<br><br>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.<br><br>About Atkins Réalis<br><br>We're Atkins Réalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.<br><br>Find out more.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Work as Pipe Fitter (GRE) at a project site.</p><p>Have good skills for joints fit-up, measure the size of erection work, Shifting pipe materials (including carbon steel, stainless steel and GRE etc.), preassembly pipe spool pieces and installation pipe system on site, Shifting pipe supports and hangers materials, preassembly and installation supports on site. Hold certificates and knows how to fit-up joints, know how to read drawings. Be capable of cutting, prefabrication and installation of HP/IP/LP pipes according to the design drawings. Be capable of prefabrication and installation the supports and hangers according to the design drawings. Good command of English. Gulf countries working experience is preferred.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Experience 5 years minimum, preferable RTR.</li><li>Good command of English.</li><li>Present location KSA, IQAMA transferable (Preferable)</li><li>Hold certificates and knows how to fit-up joints, know how to read drawings.</li><li>Good command of English.</li><li>Gulf countries working experience is preferred.</li></ul><p></p></section>

<p>We are seeking an experienced Procurement Engineer in MEP contracting and construction projects. The successful candidate will be responsible for sourcing, negotiating, purchasing, and coordinating the procurement of MEP materials, equipment, and subcontractor services while ensuring compliance with project specifications, budgets, and delivery schedules. The candidate must possess strong technical knowledge of Mechanical, Electrical, and Plumbing systems and demonstrate excellent supplier management and commercial negotiation skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in mechanical engineering, Electrical Engineering, or a related Engineering discipline.</li><li>Minimum 7 years of procurement experience in MEP contracting and construction companies.</li><li>Proven experience in procurement for commercial, residential, industrial, and infrastructure projects.</li><li>Strong technical knowledge of MEP systems and construction materials.</li><li>Experience with local and international suppliers.</li><li>Knowledge of procurement procedures, contract administration, and supply chain management.</li><li>Ability to read and interpret engineering drawings and technical specifications.</li><li>Experience in ERP procurement systems (SAP, Oracle, Microsoft Dynamics, or similar).</li><li>Proficiency in Microsoft Office (Excel, Word, Outlook).</li><li>Excellent negotiation, communication, and analytical skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Equipment Readiness Technician is responsible for ensuring equipment is delivered on time and according to operational demands. The Equipment Readiness Technician improves the reliability of Division equipment assets and increases the utilization and efficiency of assets. This person reduces the cost of service delivery (CoSD). </p><ul><li>Assist the Equipment Readiness Lead and Engineer with equipment preparation for jobs.</li><li>Execute work orders (WOs) as assigned, generally involving noninvasive maintenance related to final preparation of surface and downhole equipment and ready boxes.</li><li>Verify the status of equipment certifications and calibrations.</li><li>Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include Wireline Operational Combination Check, pressure test, measurement calibration, metrological inspection.</li><li>Execute WOs as assigned through the Computerized Maintenance Management System for the Division, ensuring compliance with standard work and WO data accuracy and completeness.</li><li>Help prepare and organize required documentation related to such activities as calibrations, function tests, material certifications, inspections and, if necessary, third-party quality control and inspections.</li><li>Prepare equipment and associated critical spares for shipment and staging to a pre-determined location or loading zone.</li><li>Load equipment onto trucks in the absence of base or operational planning support, or the Equipment Readiness Operator or Technician.</li><li>Adopt a continuous improvement work ethic and participate in initiatives to improve efficiency and productivity in equipment readiness, CoSD, and asset utilization through maintenance processes.</li><li>Comply with Division Technology Lifecycle Management standards and the Competency Management System.</li></ul><ul><li><span>2-5 years of experience in the workshop</span></li><li>Diploma in Mechanical Engineering or related discipline</li><li>Strong communication, planning , and problem-solving skills</li></ul><br><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

Company Description<br><br>Join Saipem and engineer a sustainable future. <br><br>We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.<br><br>Project: QMS Sentinel<br><br>Job Title: Pipefitter Foreman<br><br>Location: Worldwide ( currently for Qatar)<br><br>Mission<br><br>Job Description: <br><br>Coordinate and control the work of the dependent team based on piping Scope of Work assigned Distribute the equipment to allow the team to perform the assigned activities<br><br>Tasks<br><br>Ensure that operators and all personnel belonging to the team strictly observe applicable safety standards Ensure that the works are carried out in accordance with the project quality requirements Analyse the drawings receiv ed from the works supervisor and give instructions to the team in order to execute the works in accordance Coordinate and check the work carried out by the team, reporting any difficulties to the works supervisor Organise al l the means, equipment and materials necessary to perform the work. Check that they comply with applicable provisions, report any anomalies and coordinate any corrective actions Liaise with the works supervisor in order to optimize the use of equipment and personnel Carry out the daily toolbox talkings Ensure adherence to the planned time frame Ensure that any approved modification made during the execution of the works is duly marked-up on the relevant drawings, in order to allow the issue of As Built documentation Provide the works supervisor with data on quantities produced and/or installed for updating Progress Reports and quantities accounting Provide the work supervisor with data on manpower, equipment, tools and material used Implement the permit-to-work system Liaise with other disciplines on ongoing operations Ensure housekeeping of the work location<br><br>What are we looking for?<br><br>Education: High School/Secondary<br><br>Experience: 10-15 years as a Pipefitter Foreman within Oil & Gas<br><br>Languages: English Language skills required<br><br>Technical Skills<br><br>Experience in position 10 to 15 years Experience with welding application 3-5 years and above Knowledge of Manual SMAW/FCAW welding process Knowledge of Cutting and trimming applications (cold and hot cutting) Knowledge of Oxyacetilen cutting, Plasma cutting aplication Knowledge of Milling, turner, lathe machine application Knowledge of Drilling application Work experience with the following Isometric,Bevel designs,Fittings Torquering Steel fabrication and erection Lifting and rigging operations Installation and assembly Work experience with the follwing materials Carbon steel flowline Clad Iconel 625/825Stainless steel 314L, 316LExperience proven on pipeline scope onshore and offshore Experience proven for Heavy Fabrication yards, Refinery, Power Plant Experience proven for shipyards, offshore Jacket Installation, Wind Farm Installation,Experience proven for Deck, Conductors, Pilling, Boat Landing installation<br>What Can We Offer To You<br><br>Contract valid until 30.06.2027 (subject to extension according to Company needs) Corporate Benefits: We offer a comprehensive benefits package, including health insurance. Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.<br><br>Additional Information<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our website: https://www.saipem.com/en/gpsag<br><br>One vision, many paths, limitless possibilities.

Company Description<br><br>Join Saipem and engineer a sustainable future. <br><br>We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.<br><br>Project: QMS Sentinel<br><br>Job Title: Pipefitter Foreman<br><br>Location: Worldwide ( currently for Qatar)<br><br>Mission<br><br>Job Description: <br><br>Coordinate and control the work of the dependent team based on piping Scope of Work assigned Distribute the equipment to allow the team to perform the assigned activities<br><br>Tasks<br><br>Ensure that operators and all personnel belonging to the team strictly observe applicable safety standards Ensure that the works are carried out in accordance with the project quality requirements Analyse the drawings receiv ed from the works supervisor and give instructions to the team in order to execute the works in accordance Coordinate and check the work carried out by the team, reporting any difficulties to the works supervisor Organise al l the means, equipment and materials necessary to perform the work. Check that they comply with applicable provisions, report any anomalies and coordinate any corrective actions Liaise with the works supervisor in order to optimize the use of equipment and personnel Carry out the daily toolbox talkings Ensure adherence to the planned time frame Ensure that any approved modification made during the execution of the works is duly marked-up on the relevant drawings, in order to allow the issue of As Built documentation Provide the works supervisor with data on quantities produced and/or installed for updating Progress Reports and quantities accounting Provide the work supervisor with data on manpower, equipment, tools and material used Implement the permit-to-work system Liaise with other disciplines on ongoing operations Ensure housekeeping of the work location<br><br>What are we looking for?<br><br>Education: High School/Secondary<br><br>Experience: 10-15 years as a Pipefitter Foreman within Oil & Gas<br><br>Languages: English Language skills required<br><br>Technical Skills<br><br>Experience in position 10 to 15 years Experience with welding application 3-5 years and above Knowledge of Manual SMAW/FCAW welding process Knowledge of Cutting and trimming applications (cold and hot cutting) Knowledge of Oxyacetilen cutting, Plasma cutting aplication Knowledge of Milling, turner, lathe machine application Knowledge of Drilling application Work experience with the following Isometric,Bevel designs,Fittings Torquering Steel fabrication and erection Lifting and rigging operations Installation and assembly Work experience with the follwing materials Carbon steel flowline Clad Iconel 625/825Stainless steel 314L, 316LExperience proven on pipeline scope onshore and offshore Experience proven for Heavy Fabrication yards, Refinery, Power Plant Experience proven for shipyards, offshore Jacket Installation, Wind Farm Installation,Experience proven for Deck, Conductors, Pilling, Boat Landing installation<br>What Can We Offer To You<br><br>Contract valid until 30.06.2027 (subject to extension according to Company needs) Corporate Benefits: We offer a comprehensive benefits package, including health insurance. Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.<br><br>Additional Information<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our website: https://www.saipem.com/en/gpsag<br><br>One vision, many paths, limitless possibilities.

<ul><li>Develop and execute strategic sales plans to achieve and exceed ready-mix concrete sales targets within assigned territories.</li><li>Cultivate strong, long-term relationships with key decision-makers in construction companies, developers, and contractors.</li><li>Identify and pursue new business opportunities by actively prospecting and networking within the construction industry.</li><li>Understand customer needs and provide tailored ready-mix concrete solutions, including technical specifications and delivery logistics.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Business Administration, Marketing, Civil Engineering, or a related field.</li><li>Minimum of 3-5 years of proven sales experience, specifically within the ready-mix concrete or construction materials industry.</li><li>Demonstrated success in B2B sales, with a strong track record of meeting and exceeding sales quotas.</li><li>Excellent understanding of concrete properties, applications, and construction project lifecycles.</li></ul>

Requisition Number: 24344BR<br><br>Description<br><br>At Stantec, we approach every project as a partnership, because our work creates a lasting impact on our clients’ communities. We believe that when smart, passionate, creative people come together, real possibilities are within reach.<br><br>Stantec is looking for an Architectural Inspector to join our growing site supervision team in RAK, UAE.<br><br>Key Responsibilities Include<br><br> Inspecting site conditions before the start of construction activities. Verifying the compatibility of the site with the designed permanent works. Checking for obstructions. Photograph and document the condition of an existing property that the work might damage. Reviewing materials delivered to site for conformance with approved samples, materials and equipment and report findings. Checking that materials delivered to site are appropriately stored and reporting discrepancies. Inspecting the construction of temporary and permanent works to ensure compliance with the Contract Documents and approved shop drawings and submittals. Preparing daily logs and reports. Maintain records of inspections made, tests performed, work executed, etc. Performing all work in accordance with the Contract Administration Procedures Manual. Observing site safety practices and the progress of the work. Reporting any concerns. Assisting with the inspection of completed works. Helping prepare punch lists. Monitoring the start-up, testing, commissioning and handover of the works. Assist in the review of Shop drawing and Material submittal related to Architectural and ID works Perform all other duties given by the direct manager.<br><br>Qualifications<br><br> Bachelor’s degree in relevant disciplines: Architecture or Architectural Engineering. Must have an approved Unlimited Architect RAK Municipality license approval Minimum Eight (8) years of experience in a similar or equivalent Must have experience working on projects related to Healthcare/Hospital 3 years (UAE) Construction Administration experience in Consultancy Firms and others, Middle East buildings project experience Review of drawing related to ID<br><br>works and inspection on site<br><br> Good oral and written communication skills. Excellent oral and written communication skills. Knowledge of building construction, materials, systems and trade practices is required. Computer proficiency.<br><br>\<br><br>About Stantec<br><br>We’re active members of the communities we serve. That’s why at Stantec we always design with community in mind. We believe growing a great design company happens from the inside out. We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary.<br><br>The Stantec community unites approximately 30,000 employees working in over 450 locations across six continents. We collaborate across disciplines and industries to bring projects to life. Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work. Redefine your personal best. Join us!<br><br>Work Location(s):United Arab Emirates - Ras al-Khaimah<br><br>Employment Type: Full-Time<br><br>Job Type: Regular<br><br>Job Category: Architecture

<p>We are seeking an experienced Sales Engineer to join our team in Qatar, specializing in overhead cranes. The role focuses on developing new business, managing key accounts, and delivering technical and commercial solutions to industrial clients. The ideal candidate has strong market knowledge in Qatar and hands-on experience in sales of overhead cranes.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Proven experience in sales of overhead cranes, lifting equipment, or material handling systems</li><li>Strong understanding of the Qatar market and key industrial clients</li><li>Valid Qatar driving license (mandatory)</li><li>Experience developing new business opportunities and managing existing customer accounts</li><li>Proven ability to prepare technical and commercial proposals</li><li>Strong communication, negotiation, and presentation skills</li><li>Ability to manage multiple accounts and sales opportunities</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure planning activities is aligned to Maintenance KPIs and is executed timely for Operational effectiveness. Develop detailed scope of work for processing Company work orders for asset maintenance. Review plan tasks ensuring resources related to materials, procurement, tools, and equipment, labour, contracts, and logistics requirements are allocated. Perform daily review of new notifications to ensure the information is sufficient for planning purposes and provides insight for realistic TFUC (Time Frame Under Consideration) and support the Latest Acceptable Completion Dates (LACD), amendment process checks and requests cancellation of identified duplicate work orders for similar work on the same equipment / functional location. Ensure all associated costs are captured in the work order prior to sending for management approval. Ensure that planned work is consistent with established Company Standards. Raise Master Data Governance (MDG) that is not listed or are incorrect in the SAP Bill of Materials (BOM) with direct relation to work order planning. Prepare Material Return to Stock (MRS) for surplus/unused materials to be returned to the warehouse. Facilitate the monthly PM review process, 12 weeks ahead of the schedule, and prepare PM plans. Maintain the library of SAP PM task lists which are set up and update the task lists for routine and major repetitive works. Support the work order (WO) close-out process setting the status to Technical Completion (TECO).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Higher National Diploma (HND) in Engineering. 7 years' experience with direct maintenance in planning /scheduling within oil and gas and petrochemical industry, out of which 3 years spent as Planning and/or Scheduling roles. Proficient in written and spoken English. Computer literacy and familiar with industry specific computer programs such as SAP PM.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure planning activities is aligned to Maintenance KPIs and is executed timely for Operational effectiveness. Develop detailed scope of work for processing Company work orders for asset maintenance. Review plan tasks ensuring resources related to materials, procurement, tools, and equipment, labour, contracts and logistics requirements are allocated. Perform daily review of new notifications to ensure the information is sufficient for planning purposes and provide insight into realistic Time Frame Under Consideration (TFUC) and support the Latest Acceptable Completion Dates (LACD), amendment process checks and requests cancellation of identified duplicate work orders for similar work on the same equipment / functional location. Check all associated costs are captured in the work order prior to sending them for management approval. Raise Master Data Governance (MDG) that is not listed or are incorrect in the SAP Bill of Materials (BOM) with direct relation to work order planning. Prepare Material Return to Stock (MRS) for surplus/unused materials to be returned to the warehouse. Ensure that planned work is consistent with established Company Standards. Facilitate the monthly PM review process, 12 weeks ahead of the schedule, and prepare PM plans. Maintain the library of SAP PM task lists which are set up and update the task lists for routine and major repetitive works. Support the Work Order (WO) close out process setting the status to Technical Completion (TECO).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Higher National Diploma (HND) in Engineering. 7 years' experience with direct maintenance in planning /scheduling within oil and gas and petrochemical industry, out of which 3 years within Planning and/or Scheduling roles. Proficient in written and spoken English. Computer literacy and familiar with industry specific computer programs such as SAP PM.</p><p></p></section>

<p>Ability to review and assess Contractor’s baseline master programmes and detailed submissions/revisions, including zoning, WBS structure, contractual compliance, BoQ analysis, scope compliance, sequencing, critical path analysis, cost loading and distribution, production rates, duration analysis, resource loading, activity coding, schedule log, etc. - Has a solid knowledge in scheduling options and techniques to address critical tasks, including longest path analysis, backdated updates, eliminating out-of-sequence activities, and rectifying scheduling defects. - Fully familiar with the construction requirements including engineering submissions, engaged authorities in infrastructure projects, pre-requisite works, teaming sequence and needs, required crews to complete any infrastructure task and their expected productivity, testing and commissioning as well as handing over requirements. - Demonstrate a sound knowledge in project control and verifying the Contractor’s updates utilizing project management tools; like performance measurement sheets, earned value reports, variance reports, etc. - Ability to perform productivity analysis, longest path analysis, multiple critical path analysis, identifying the root cause of delays, and other analyses might be requested. - Has a sound knowledge in evaluating Extension of Time techniques, recommendation report’s structure, delay analysis methods, preparing and tracking detailed chronologies and preparing recommendations in accordance with national/international standards. - Ability to perform concurrency analysis, identify Contractor’s concurrent delays, track records, perform window analysis, and prepare recommendations accordingly. Civil Engineering Knowledge: - Demonstrate a sound knowledge of Treated Sewage Effluent and landscaping infrastructure including but not limited to, different types of flow, the use of chambers (conventional, butterfly, air release, washout, distribution, flow meter), pressure compensating elements, sprinklers, valves, fitting and other ancillaries, as well as different types of Hard and Soft landscape construction elements. - Knowledgeable in other utilities and roadway infrastructure, including but not limited to drainage (pipes, manholes, flow chambers, gullies, connections, ancillaries, flow systems, dewatering techniques, the use of granular materials), Electricity, Street lighting, Telecommunication, different types of pavements (flexible, rigid, semi rigid, overlays), street and safety furniture, including all testing requirements, and handing over to the Authorities. Contract Administration: - Sound knowledge of FIDIC forms of contract, different procurement routes, and contract types. - Literate in the Society of Construction Law protocol and ability to assess Contractor’s claims in accordance with the stipulated principles involved. - Ability to interpret contract terms correctly, understand bespoke forms, identify roles, responsibilities, obligations, and risks of different contracting parties, breaches (material, non-material, repudiatory), default events, preliminary requirements, bonds, insurances, submission/approval timelines, and dispute resolution mechanisms. - Ability to identify contractual standings and merits for Contractor’s claims, and draft contractual letters for Contractor/Employer, following proper contractual mechanisms and performing the roles and obligations of a supervision consultant. Commercial Knowledge / Skills: - Ability to perform Bill of Quantity analysis, identify the required materials to be loaded in the Contractor’s schedule of work, and assess the cost loading of different activities/cost headings. - Ability to analyze Contractor’s cash-in flow, forecasting the specific task and the associated cost, and ensuring consistency between the pricing documents and the programme of work. - Ability to Perform gap analysis for Earned Value / Actual Value of work completed, and demonstrate sound knowledge in identifying variances, and preparing recommendations. - Ability to perform detailed take-off for different disciplines. - Ability to perform Value-to-Complete report, identifying the value of work completed and providing category/bill wise breakdown of remaining works in different intervals. Risk Management Knowledge / Skills: - Ability to identify Risks for different disciplines, in accordance with the schedule of work and site conditions. - Ability to develop a comprehensive Risk Register including Risk definition, parameters, scores and Risk response plans. - Drafting Risk alerts for critical and high proximity potentials.</p><p>Software Skills: - Project Management Software: Primavera P6 Professional, Oracle Primavera, Active Risk Manager. - Construction Software: AutoCAD Civil 3D, or Conventional AutoCAD. - Microsoft Office: Word, Excel, PowerPoint, Power BI. - Other software: Spreadsheet proficiency (Excel, Google Sheets), Submittal and RFI tracking Software. Education: - Bachelor's degree in Civil Engineering (Required) Experience: - Planning Engineer: 14 years (Required) License/Certification: - MMUP (Required) Location: - Doha (Required)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b><br>Job Description:</b><br>Mission<br> Perform Project technical tasks assigned by the Instrumentation Discipline Lead and by the Instrumentation Engineer consisting in design, checking, layout definition, installation drawings and material definition of instrumentation installation elements<br> Interface and coordinate with the other Project Team Specialists and Designers<br> Perform 3D Instrumentation modeling activities<br>Tasks<br>The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements. Tasks include:A - Development Technology know how and Commercial support<br>B - Feasibility C - Bidding phase/Commercial proposal development<br> Prepare Instrumentation bulk material quantities (BOQs and MTOs) for cost and erection works estimates<br> Support Discipline Lead to define man hours and cost estimatesD - Projec t Execution<br> Review Client technical documentation and requirements<br> Follow-up subcontracted engineering activities and control subcontracted engineering documents<br> Apply engineering design basis and guidelines<br> Prepare the technical documentation for Instrumentation bulk material requisitions and prepare, according to internal procedures, the technical evaluations<br> Provide technical support to Project Team<br> Optimise Instrumentation bulk material design ensuring minimal cost and complexity in compliance with the contractual and safety requirements<br> Prepare Instrumentation bulk material technical specifications<br> Prepare Instrumentation installation drawings<br> Prepare Instrumentation BOQs and MTOs<br> Perform Instrumentation 3D modelling design activities and participate to 3D Modelling reviewsE - Construction and start up<br> Provide technical and engineering support to construction Team<br> Perform site engineering activities during construction and commissioning phases<br>What are we looking for?<br>Education: Master's Degree/bachelor s degree in: Engineering<br>Experience:<br>Languages: English Language skills required (and any other specified by Project)<br><br><br></div></section>

<ul><li>Manage and supervise high-rise building construction and group of villas projects</li><li>Apply knowledge of structural, architectural, and MEP coordination</li><li>Ensure compliance with UAE construction regulations, quality standards, and authority approvals</li><li>Handle project documentation including BOQ basics, measurements, and site quantities</li><li>Prepare daily and weekly progress reports</li><li>Manage site technical issues and ensure timely resolution</li><li>Coordinate and monitor daily and weekly site activities</li><li>Coordinate effectively with consultants, subcontractors, and suppliers</li><li>Oversee manpower and material coordination</li><li>Monitor project schedules and track progress</li><li>Ensure quality control and HSE compliance on site</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Professional Engineer registration or relevant certifications</p></li><li><p>Experience with main contractors in UAE or GCC</p></li><li><p>Strong communication, problem-solving, and organizational skills</p></li><li><p>Familiarity with local building regulations and authority requirements<br><br><strong><u>JOB LOCATION : DUBAI</u></strong></p></li></ul>