وظائف مهندس مواد

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Civil Inspector is responsible for monitoring and inspecting civil and infrastructure works on site, ensuring that all activities are executed in compliance with approved documentation, quality standards, and regulatory requirements. The role supports coordination across disciplines and ensures infrastructure readiness for subsequent construction activities.</p><br>Your role<ul><li>Inspect civil works including foundations, roads, drainage, paving, trenches, and equipment bases.</li><li>Ensure compliance with approved drawings, specifications, and quality procedures.</li><li>Review and respond to WIRs, MIRs, and RFIs in a timely manner.</li><li>Monitor site progress and verify completed works against planned schedules.</li><li>Coordinate with architectural, structural, and MEP teams to manage interface issues.</li><li>Conduct material inspections and ensure approved materials are used.</li><li>Identify defects, NCRs, and ensure corrective actions are implemented.</li><li>Maintain inspection logs, documentation, and photographic records.</li><li>Assist in snagging, defect resolution, and final handover inspections.</li><li>Ensure compliance with environmental, safety, and quality standards.</li></ul>About you<ul><li>Bachelor’s degree in Civil Engineering.</li><li>Experience in civil construction inspection and infrastructure works.</li><li>Experience in industrial, infrastructure, or data centre projects preferred.</li><li>Strong knowledge of civil construction methods and materials.</li><li>Familiar with inspection procedures, QA/QC processes, and documentation.</li><li>UPDA certification preferred.</li><li>Good coordination and communication skills</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Performing quantities verification at site to ensure: -</li> </ul> <ol> <li>All parties comply with project payments established procedures and their alignment to the latest PWA Projects Payment Procedures Manual.</li> <li>Certified value of works and materials on/off site are in line with Contract provisions and latest PWA Projects Payment Procedures Manual.</li> <li>The works/quantities or materials certified by the Engineer/PMC/ Consultant do not exceed the executed works on site.</li> <li>To check the quantities executed and the materials delivered in the final accounts for all projects and compare them with the quantities in the As-Built drawings of the Projects (if required in accordance with the contract provisions)</li> <li>Technical auditing</li> </ol> <ul> <li>Recommend necessary corrective action(s) for inconsistencies, errors, and noncompliance with the Contract provisions and latest PWA Projects Payment Procedure Manual.</li> <li>Preparing report, reviewing &amp; managing reports provide by team members; related to Quantities Verification task.</li> <li>Performing follow-up quantities verification at site to verify implementation of the proposed corrective action.</li> <li>Preparing report of the follow-up quantity verification.</li> <li>Checking and processing day to day all types of payments for PWA Projects.</li> <li>Provide advice on the issues raised by the PWA Departments regarding the payment clauses in the contract documents.</li> <li>Assist in contract closeout procedures.</li> <li>Checking Final Accounts.</li> </ul><br><ul> <li>Should have a BSc degree in Quantity Surveying from recognized university with MRICS professional qualification.</li> <li>Should have minimum 15 years demonstrable postgraduate experience in all facets of the Quantity Surveying profession; all of which shall have been applicable to capacity of a professional Quantity Surveyor working in a professional Consultancy practice or Employers' organization.</li> <li>Minimum of 05 years working experience (preferably in Qatar/GCC) shall be site-based experience in Infrastructure (highway/road) Projects.</li> <li>Extensive knowledge and experience in procurement methods for consultancy and construction contracts as well as International contracting conditions and laws.</li> <li>Extensive knowledge in Civil Engineering Standard Method of Measurement (CESMM)</li> <li>Preferably, has minimum 05 years' experience in the gulf region.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Site Inspector-QA QC <p><strong>Role Objective: </strong>To ensure that all design, procurement, construction, testing, commissioning and handover activities are executed in accordance with the Contract Documents, approved drawings, project specifications, Company standards, requirements, applicable statutory regulations and the approved Quality Management System, while maintaining the highest standards of workmanship throughout the project lifecycle.</p><br> <p><strong>4.1 </strong><strong>Key Accountabilities</strong></p><br> <ul><li>Review and monitor the Contractor's Project Quality Plan (PQP), Inspection and Test Plans (ITPs), Method Statements and quality procedures to ensure compliance with project requirements.</li><li>Review material submittals, technical submittals and manufacturers' documentation to verify compliance with approved specifications before procurement and installation.</li><li>Monitor and witness inspections for architectural, structural, mechanical, electrical, ELV, fire protection and specialist systems to verify compliance with approved drawings and specifications.</li><li>Conduct regular site quality inspections, identify quality deficiencies, issue observations and Non-Conformance Reports (NCRs), and verify the implementation of corrective and preventive actions.</li><li>Review Requests for Inspection (RFIs), material delivery inspections and factory acceptance documentation to ensure only approved materials and workmanship are incorporated into the project.</li><li>Monitor compliance with approved mock-ups, sample panels and benchmark installations before commencement of full production works.</li><li>Review laboratory testing reports, third-party inspection reports, testing and commissioning procedures, Test, Adjusting and Balancing (TAB) reports and integrated system testing documentation.</li><li>Verify completion of snagging, de-snagging and punch list activities prior to Practical Completion and Final Handover.</li><li>Participate in quality audits, progress meetings, technical coordination meetings and site inspections with Company, consultants and contractors.</li><li>Maintain comprehensive quality records, inspection registers, NCR logs, quality statistics and project documentation.</li><li>Assist in the review of payment applications by confirming the quality and completion status of executed works.</li><li>Promote continual improvement initiatives and ensure full implementation of the Project Quality Management System throughout all phases of the project<ol><li><strong>General Responsibilities in Quality, Environmental &amp; Occupational Health &amp; Safety Management Systems </strong><ol><li>Aware of the QHSE Management System.</li><li>Understand the importance of conformance to the QHSE Policy and procedures and to the requirements of QHSE management system.</li><li>Aware of the Customer Requirements (where relevant).</li><li>Aware of the Significant Environmental Aspects and Occupational Hazards / risk in this area of operation.</li><li>Understand the potential consequences of deviations from approved procedures, specifications and safety requirements.</li><li>Aware of current Objectives and Targets in this area and what is the current status.</li><li>Aware of mergency Preparedness &amp; Response.</li><li>Aware of Security Requirements, sexual exploitation and abuse or gender based violence.</li></ol></li></ol></li></ul> <p><strong>Part 5. Working Conditions &amp; Hazards</strong></p><br> <p><strong>CHOOSE ONE:</strong></p><br> <ul><li> Normal office facilities (own office with desk, access to telephone)</li><li> Some exposure to heat, cold, dirt, noise and rainy weather conditions; some time away from duty station, exposure to</li><li> outdoor conditions</li><li> Some exposure to severe disagreeable conditions noise moisture, dust, excessive temperature, considerable dirt.</li><li><strong>CHOOSE ONE:</strong></li><li> Very slight chance of accident or health hazard, usual office situation</li><li> Exposure to security threats and/or other injury could occur in the course of work. Minor accidents possible.</li><li> Job requires working with moving equipment that could inflict injuries; health hazards due to unsanitary conditions;</li><li> There is exposure to serious injuries through some hazardous circumstances involving handling of equipment; may cause </li><li> illness, incapacity and loss of time.</li><li> There is likelihood of frequent exposure to hazards or conditions may cause total disability or death. Requires constant use of</li></ul> <p> safety equipment.</p><br> <p><strong>Part 6. Job Requirement</strong></p><br> <p><strong>Educational Qualifications</strong></p><br> <ul><li>Bachelor's Degree in Civil Engineering.</li><li>ISO 9001 Lead Auditor or Internal Auditor Certification is highly desirable.</li><li>Certified Quality Engineer (CQE) or equivalent professional certification is an advantage.</li></ul> <p><strong>Experience</strong></p><br> <ul><li>Minimum 10 years of professional experience in Quality Assurance and Quality Control for building construction projects.</li><li>Minimum 5 years of experience in commercial office fit-out or high-end interior projects.</li><li>Proven experience in Design &amp; Build contracts.</li><li>Strong knowledge of inspection procedures, material approvals, testing and commissioning processes and quality management systems.</li><li>Experience in Qatar and familiarity with Qatar Construction Specifications (QCS), Qatar Civil Defense (QCD) requirements and local authority regulations.</li></ul> <p><strong>Behavioral Competencies</strong></p><br> <p><strong>Technical Competencies</strong></p><br> <p>Integrity and Professional Ethics</p><br> <p>Communication Skills</p><br> <p>Attention to Detail</p><br> <p>Analytical Thinking</p><br> <p>Problem Solving</p><br> <p>Decision Making</p><br> <p>Planning and Organizing</p><br> <p>Teamwork</p><br> <p>Time Management</p><br> <p>Report Writing</p><br> <p>ISO 9001 Quality Management Systems</p><br> <p>Project Quality Plans (PQP)</p><br> <p>Inspection &amp; Test Plans (ITPs)</p><br> <p>Method Statement Review</p><br> <p>Material Submittal Review</p><br> <p>Shop Drawing Review</p><br> <p>Requests for Inspection (RFIs)</p><br> <p>Non-Conformance Report (NCR) Management</p><br> <p>Corrective &amp; Preventive Action (CAPA)</p><br> <p>Factory Acceptance Testing (FAT)</p><br> <p>Site Acceptance Testing (SAT)</p><br> <p>Testing &amp; Commissioning</p><br> <p>Test, Adjusting &amp; Balancing (TAB)</p><br> <p>Snagging &amp; Handover</p><br> <p>Document Control</p><br> <p>Quality Auditing</p><br> <p>Qatar Construction Specifications (QCS)</p><br> <p>Microsoft Office Suite</p><br> <br> <br> </div>

<p>Co-ordinating / attending the inspection, tests and punch listing on behalf of Company</p><p>Undertake familiarization with Project and discipline specific inspection documentation to ensure understanding of contract requirements</p><p>Implement quality inspection procedures on construction activities, suppliers, subcontractors to ensure compliance with project specification</p><p>Ensure that the documentation generated by the contractor for inspections, tests, surveillance and surveys meets the requirements of the Project Quality Plan, ITPs and project requirements</p><p>Ensure completion of relevant forms and reports on inspections and tests undertaken by the contractor and maintenance of inspection records</p><p>Communicating effectively with the contractor, third parties and end users at your level</p><p>Ensuring that all equipment used for measuring and testing is in calibration and such records are available</p><p>Perform Surveillance of project site construction activities to identify problems and potential or actual non-conformances and to assist in proposing corrective and preventive actions</p><p>Liaise with other site Supervisors and Contractor to be aware of planned and completed construction works to ensure NDE is planned and performed</p><p>Assist Sr. QA/QC Engineer in the review/approval of Contractor QA/QC documents such as QCPs, ITPs, WPS/PQRs/ Special Processes / Personnel qualifications, Material Approval Requests, Vendor Documents, MRBs, Project Dossiers etc.</p><p>Monitor / Witness Contractor's material preservation, fabrication, installation, inspection and testing activities related to the Structural Steel, Process Piping, Pipelines, tanks, Rotating and Static equipment including internals installation and associated preceding and succeeding interface activities</p><p>Witness / verify all inspection and testing activities related to the Welding, NDT, PWHT, Hardness testing, pressure testing of valves, Alloy Verification, painting etc., starting from the procedures / personnel qualification till the respective systems hydro testing and ensure compliance with the project requirements</p><p>Closely monitor the performance of special process and personnel, weld Repairs / NDT status etc., Controls exercised by the contractor and appraise Sr. QA/QC engineer in case of any concerns</p><p>Participate in the receiving inspection of project permanent materials and verification of associated documentation for traceability of Piping bulk materials, Structural steel, Static and Rotating equipment, Consumable like welding electrodes / filler wires / gases, Painting / wrapping materials etc.</p><p>Follow-up on Corrective Actions to close-out non-conformances</p><p>Monitor trends of non-compliance with requirements and feedback on the status of Contractor's performance</p><p>Initiate Surveillance / NCR's for SR. QA/QC Engineer's approval</p><p>Maintaining relevant QA/QC documents / records</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical/Metallurgical/Materials Engineering degree, technical diploma and experience with direct exposure to quality Control in multi-discipline construction environment. Preferably having formal training in QC and membership with recognized charts or other professional institutions.</p><p>CSWIP 3.2 / AWS-SCWI Sr. Welding Inspector and NDT Level-II (ASNT, ISO, etc.) certification is a must. Preferred to have BGAS grade-2 / NACE Level-2 Painting Inspector certificate. Other equivalent certifications provided by internationally recognized organizations can be accepted.</p><p>10 years' experience for Bachelor's degree engineers and 15 years' experience for technical diploma holders in similar position in Oil &amp; Gas sector.</p><p>Experience in GCC is desirable</p><p>Candidate should have hands on working experience related to storage tanks, piping, pipeline welding inspection and testing. Installation of static &amp; rotating equipment</p><p>The candidate should have sound working knowledge on QC aspects and various testing requirements related to major oil &amp; gas / petrochemical focused construction projects</p><p>Duties are normally complex and vary and require ability to work well with contractor's personnel and colleagues at all levels in multidisciplinary, multicultural environments.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Electrical Engineer Technical Office (8 10 Years Experience)<br>Key Responsibilities:<br>Review and check IFC drawings, specifications, and all electrical system design documents.<br>Conduct technical reviews of IFC documentation and identify design issues, discrepancies, and conflicts.<br>Prepare, submit, and follow up on RFIs (Requests for Information).<br>Prepare material take-offs and quantity estimations for all electrical systems.<br>Develop technical documentation, reports, method statements, operation and maintenance (O&amp;M) manuals, and related project documents.<br>Coordinate with and support draftsmen in the preparation and submission of shop drawings.<br>Manage procurement activities and follow up with suppliers for various electrical systems and materials.<br>Review supplier quotations and technical offers to ensure compliance with project specifications and requirements.<br>Prepare and submit technical material submittals and supporting documentation.<br>Provide technical support to site teams and assist in resolving engineering and construction issues.<br>Coordinate with project stakeholders to ensure timely approval of technical submissions and material procurements. Bachelor's Degree in Electrical Engineering.<br>8 10 years of experience in MEP projects, with a strong background in Technical Office activities.<br>Proficiency in reviewing electrical design drawings, specifications, and technical documents.<br>Experience in material take-offs, shop drawing coordination, and technical submittals.<br>Strong knowledge of electrical systems, international standards, and construction practices.<br>Excellent communication, coordination, and problem-solving skills.<br>Proficiency in AutoCAD, Microsoft Office, and other relevant engineering software.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Project Engineer ensures that projects are completed in a safely manner and meets the project objectives through planning and scheduling, resource allocation and management, cost control, technical direction, compliance with quality standards and procedures. Assists the Project Manager in overseeing the Operational Management areas: Human Resource Management, Project Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, Subcontract management, Material Procurement and Management of all Projects System Assembly</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage and oversee projects from conception to completion, ensuring adherence to schedules, budgets, and quality standards.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to develop project plans, specifications, and timelines.</p><br> <p>Supervise activities on-site, including scheduling labor, materials, and equipment to ensure efficient project execution.</p><br> <p>Monitor project progress, identifying potential delays, risks, and issues, and implementing corrective actions as necessary.</p><br> <p>Conduct regular inspections and quality control checks to ensure compliance with design specifications and regulatory requirements.</p><br> <p>Prepare and review project documentation, including contracts, change orders, and progress reports, to maintain accurate records.</p><br> <p>Communicate regularly with clients, stakeholders, and project teams to provide updates on project status, milestones, and deliverables.</p><br> <p>Manage project budgets and expenditures, tracking costs and forecasting expenses to ensure financial objectives are met.</p><br> <p>Identify opportunities for process improvements and efficiencies to enhance project delivery and outcomes.</p><br> <p>Ensure compliance with safety regulations and promote a culture of safety awareness among project teams and subcontractors.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>n-depth understanding of construction principles, methods, and materials.</p><br> <p>Proficiency in project management software and tools for scheduling, budgeting, and documentation.</p><br> <p>Strong communication skills to effectively liaise with stakeholders, subcontractors, and project teams.</p><br> <p>Problem-solving abilities to address challenges and obstacles encountered during project execution.</p><br> <p>Leadership skills to effectively manage teams and coordinate construction activities on-site.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Contingency Workforce Management L3<br>Commercial &amp; Residential Construction L3<br>Project Planning L3<br>Construction Budgeting L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or any related field<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome.</p><p>To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection.</p><p>Report item wise visual, dimensional, quantities with UOM in the Inspection report with clear status (Accepted / Rejected) identified. Shall be able to justify the reasons for rejections to raise complaint Notifications to suppliers.</p><p>Shall be responsible for segregation of accepted / rejected / Quarantine Materials after physical Inspection of materials</p><p>Ensure proper tracking systems are followed to keep the records of Inspection documents and retrieval when required.</p><p>Ensure resolution of Certification CNR in co-ordination with stake holders and release of accepted materials from SAP Quality Blocks as applicable.</p><p>Independently responsible for Materials Inspected. Shall be able to justify queries / rejections from warehouses or end users and resolve the issues.</p><p>Carry out Preservation Inspection and old stock material Inspection as required from time to time and submit Inspection reports.</p><p>Shall be able to Drive the Car and make inspection visits to the Warehouse locations as directed.</p><p>Responsible for housekeeping of Inspection area in compliance to HSE regulations.</p><p>Adhere to section work instructions / guidelines to perform the inspection activities.</p><p>Prepare section weekly / monthly reports and submit to Sr. Material Engineer (Insp)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or higher in an Engineering under respective discipline (Mechanical / Electrical / Instrumentation).</p><p>A minimum of 10 years' experience in Plant Maintenance (Oil &amp; Gas, Chemical or Petro-chemical) or technical evaluation of materials out of which minimum of 6 years' experience in oil and gas / Allied Process Industry.</p><p>Exposure to supply chain environment is preferable.</p><p>Experience in Technical evaluation of Mechanical / Electrical Spares, Pipeline Components, Consumables is required.</p><p>General knowledge of process system, Equipment &amp; Materials used in Refineries and the Oil &amp; gas Industry. Shall have good practical skills, and hands-on experience in Procurement, engineering, construction, maintenance.</p><p>Knowledge and Experience in reviewing Engineering drawings, process data sheets, parts list, Certificates, Spare Parts Interchangeability Record (SPIR) and Manufacture Catalogues.</p><p>Knowledge of Engineering and International Standards.</p><p>Shall be Computer literate with specific knowledge of Material Equipment/Spare Parts cataloguing systems (Shell or SAP) and Microsoft Office applications.</p><p>Capability to understand and follow international safety standard followed in Oil &amp; Gas industry.</p><p>IOSH certificate Managing Safely or equivalent is mandatorily required prior to start working.</p><p></p></section>

QC INSPECTOR (ELECTRICAL) – QATAR <br><br>Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.<br><br>Airswift is seeking for a QC Inspector (Electrical) to work in Qatar with a major Oil & Gas Company.<br><br>Qualification<br><br>Degree and/or Diploma in Electrical, Electronic, or Instrumentation Engineering. Experience in Quality Control within multi-discipline construction and commissioning environments. Formal training in Quality Control and membership in a recognized chartered or professional institution is preferred.<br><br>Experience<br><br>Minimum 10 years of experience in a similar position; GCC experience is desirable. Sound working knowledge of QC requirements and testing activities related to the installation, testing, and commissioning of Electrical and Instrumentation equipment in Oil & Gas and Petrochemical plants. Ability to work effectively with contractor personnel and colleagues at all levels within multidisciplinary and multicultural environments.<br><br>Primary Duties And Responsibilities<br><br>Implement the elements of the Company's Management System applicable to the function. Ensure personal safety and the safety of others who may be affected by project activities and proactively participate in all safety matters related to project execution. Promote environmental protection and pollution prevention throughout project activities. Coordinate inspection and testing requirements on behalf of the Client/Project. Review and familiarize with project and discipline-specific inspection documentation to ensure understanding and compliance with contract requirements. Maintain familiarity with international codes, standards, and regulations such as QCS, NEC, IEC, IEEE, NFPA 70, and other applicable standards. Implement quality inspection procedures for construction activities, suppliers, and subcontractors to ensure compliance with project specifications. Ensure all documentation generated from inspections, tests, surveillance activities, and surveys meets the requirements of the Project Quality Plan, Inspection and Test Plans (ITPs), and project specifications. Complete relevant inspection forms and prepare reports for inclusion in project quality records. Communicate effectively with contractors, third parties, and end users. Ensure all measuring and testing equipment is calibrated and calibration records are maintained. Assist construction personnel in developing quality documentation, including method statements, work procedures, ITPs, and inspection/test records. Assist in identifying actual or potential non-conformances and support the development of corrective and preventive actions. Perform and monitor technical inspections during Site Acceptance Tests (SAT) and Factory Acceptance Tests (FAT) for major electrical components including:Power, Distribution, and Measurement Transformers MV and LV Switchgear Power, Telecommunication, and Instrumentation Cables MCCBsPLC Systems MCC and LCC Panels Liaise with Field Supervisors and Contractors to ensure electrical and instrumentation testing activities are properly planned and executed. Implement Quality Control activities for Electrical and Instrumentation works on site. Review Inspection and Test Plans (ITPs), checklists, and Requests for Inspection (RFI). Conduct material receiving inspections. Verify that Electrical and Instrumentation equipment installations comply with approved drawings and specifications, including review of red-line markups. Possess experience in:HV/LV cable installation standards Punch list preparation Commissioning of electrical equipment Loop checking activities Assist the Quality Engineer in reviewing routine test reports, quality documentation, and inspection records for compliance. Monitor contractor activities related to Electrical and Instrumentation works, including:Substation grounding system installations Ground resistance measurements Soil resistivity testing Step voltage measurements Material receiving inspections Ensure all Electrical and Instrumentation activities are performed in accordance with project requirements and that all testing records and reports are properly prepared, approved, and included in project documentation packages. Witness site and laboratory tests related to Electrical and Instrumentation activities. Verify that materials and equipment are used in accordance with approved specifications. Conduct random checks on receiving inspections of Electrical and Instrumentation equipment. Verify delivery documents against purchase orders, specifications, and material certificates. Reject materials that do not meet specifications or are not supported by authentic material certification. Follow up corrective actions and monitor the closure of non-conformance reports (NCRs). Monitor trends related to contractor non-compliance and provide feedback regarding contractor performance. Initiate surveillance reports and NCRs for Quality Engineer review and approval.

<p>We are seeking a Junior Sales & Procurement Engineer to support the sales and procurement of oil and gas materials and equipment, particularly piping materials, valves, fittings, flanges, and related products. The candidate will assist in developing business opportunities, preparing quotations, sourcing materials, coordinating with suppliers and clients, and ensuring timely delivery of quality products at competitive prices. </p><ul><li><p>Support sales activities for oil and gas piping materials, valves, fittings, flanges, and related equipment.</p></li><li><p>Identify potential clients and business opportunities in Qatar and the GCC market.</p></li><li><p>Assist in preparing technical and commercial quotations, proposals, and tender documents.</p></li><li><p>Follow up with clients regarding enquiries, quotations, orders, and ongoing requirements.</p></li><li><p>Attend client meetings and participate in marketing and business-development activities.</p></li><li><p>Build and maintain professional relationships with existing and potential clients.</p></li><li><p>Review client enquiries, material requisitions, specifications, and datasheets.</p></li><li><p>Source suitable materials and equipment from approved local and international suppliers.</p></li><li><p>Prepare and issue RFQs to suppliers and obtain competitive quotations.</p></li><li><p>Compare suppliers’ technical and commercial offers and prepare bid comparison sheets.</p></li><li><p>Negotiate prices, delivery schedules, payment terms, and other commercial conditions under management guidance.</p></li><li><p>Coordinate with suppliers, logistics teams, and clients to ensure timely order processing and delivery.</p></li><li><p>Maintain accurate records of enquiries, quotations, purchase orders, supplier information, and client communications.</p></li><li><p>Monitor market trends, competitor activities, pricing, and product availability.</p></li><li><p>Ensure that supplied materials meet client specifications, applicable industry standards, and quality requirements.</p></li><li><p>Provide regular sales and procurement updates to management.</p></li><li><p>Perform other sales, procurement, and coordination duties assigned by management.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree or diploma in Mechanical Engineering, Petroleum Engineering, Industrial Engineering, Business Administration, Supply Chain Management, or a related field.</p></li><li><p>Minimum 2–3 years of relevant experience in sales and/or procurement within the oil and gas industry.</p></li><li><p>Practical knowledge of piping materials, valves, fittings, flanges, and related oil and gas products.</p></li><li><p>Previous experience in the Qatar or GCC oil and gas market is strongly preferred.</p></li><li><p>Basic understanding of technical specifications, material grades, and applicable oil and gas industry standards.</p></li><li><p>Experience in preparing quotations, RFQs, purchase orders, and commercial comparison sheets.</p></li><li><p>Good communication, negotiation, presentation, and customer-service skills.</p></li><li><p>Strong follow-up, coordination, and organizational abilities.</p></li><li><p>Proficiency in Microsoft Office applications.</p></li><li><p>Ability to work independently and as part of a team.</p></li><li><p>Valid Qatar driving licence is an advantage.</p></li><li><p>Local hire only. Candidates must currently be available in Qatar.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conduct the inspection outcome.</p><p>To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the inspection.</p><p>Report item wise visual, dimensional, quantitative with UOM in the Inspection report with clear status (Accepted / Rejected) identified.</p><p>Shall be able to justify the reasons for rejections or take complaint notifications to suppliers.</p><p>Shall be responsible for segregation of accepted/rejected / Quarantine Materials after Physical Inspection of materials.</p><p>Ensure proper tracking systems are followed to keep the records of Inspection documents and retrieval when required.</p><p>Ensure resolution of Certification CNR in co-ordination with stakeholders and release of accepted materials for SAP Quality Blocks as applicable.</p><p>Independently responsible for Materials inspected. Shall be able to justify queries / rejections from warehouses or end users and resolve the issues.</p><p>Carry out Preservation Inspection and of stock material Inspection as required from time to time and submit inspection reports.</p><p>Shall be able to Drive the Car and make inspection visits to the Warehouse locations as directed.</p><p>Responsible for housekeeping of Inspection area in compliance to HSE regulations.</p><p>Adhere to section work / guidelines to perform the inspection activities.</p><p>Prepare section weekly / monthly reports and submit to Sr. Material Engineer (Insp)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or higher in Engineering under respective discipline (Mechanical / Metallurgy / Electrical &amp; Instrumentation).</p><p>A minimum of 10 years' experience in QA/QC &amp; Inspection environment with a minimum of 6 years' experience with Oil &amp; Gas / Allied process industry out of which at least 5 years should be relevant to Materials Inspection.</p><p>Knowledge of General Engineering Practices / International Codes &amp; Standards.</p><p>Well-versed and thorough knowledge in relevant International Standards API, ASME, ISO, NEMA, IEEE, IEC, NFPA, BASEEFA, ATEX, ANSI, ASTM, TEMA, BS and related codes / standards / specifications &amp; statutory regulations.</p><p>Able to understand and interpret Company specifications &amp; regulations required to deliver the job function effectively.</p><p>Good command of certification requirements for various materials and plant equipment.</p><p>Capable of interpreting technical drawings, data sheets and specifications.</p><p>Good written and spoken English, problem-solving skills, technical communication and interpersonal skills.</p><p>Should have a valid driving license.</p><p>Capability to understand and follow international safety standards in the Oil &amp; Gas industry. IOSH certificate Managing Safely or equivalent is mandatorily required prior to starting work with Company.</p><p></p></section>

<p><strong>We Are Hiring for MEP Procurement Engineer - Doha Qatar!</strong></p><br><p><strong>Job Summary</strong></p><p>Manage the procurement of MEP materials, equipment, and subcontractor services, ensuring cost-effective sourcing, quality compliance, and timely delivery to support project execution.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Plan and execute procurement activities for MEP projects.</p></li><li><p>Source, evaluate, and negotiate with suppliers and subcontractors.</p></li><li><p>Review technical specifications, BOQs, and material submittals.</p></li><li><p>Issue purchase orders and monitor delivery schedules.</p></li><li><p>Coordinate with engineering and project teams to meet project milestones.</p></li><li><p>Ensure compliance with project specifications, company policies, and Qatar standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.</p></li><li><p>Minimum <strong>5 - 8 years</strong> of MEP procurement experience in construction projects.</p></li><li><p>Experience in the Qatar/GCC construction market is highly preferred.</p></li><li><p>Strong knowledge of HVAC, Electrical, Plumbing, Fire Fighting, and ELV systems.</p></li><li><p>Excellent negotiation, analytical, and communication skills.</p></li><li><p>Experience with ERP systems (SAP, Oracle, Microsoft Dynamics, or similar).</p></li></ul><p><strong>What We Offer</strong></p><p>✔ Competitive Salary Package<br>✔ Career Growth Opportunities<br>✔ Professional & Supportive Work Environment</p><br><p>Only shortlisted candidates will be contacted. Thank you!</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Directs co-ordinates and monitor the work of his insulation crew on all insulation activities. To ensure all hot and cold Insulation works required for the LNG Trains and associated facilities are performed safely, to prescribed standards of quality and at the most economic cost.</p><p>Reports to Insulation Site Superintendent/Maintenance Support Services Supervisor Works according to established procedures, policies and approved programs. Within these parameters, exercises latitude in planning and completed work according to required standards. Work is subject to follow-up and review by Insulation Site Superintendent /Maintenance Services Engineer/ Supervisor depending upon the circumstances. Co-ordinates and monitors the activities of his Insulation Foremen/Charge hand. Performs Quality Assurance/Control to a standard established by COMPANY. Co-ordinates the daily running of hot and cold insulation works of his insulation crew . Includes planning and scheduling routine work, responding to emergency work, obtains permits for vehicle entry, cold work, man entry, obtaining materials, approves Material Requisitions, etc. Ensures that the standard and quality of work executed by his team (Insulation) including cladding, foam injection, sheet metal work, housekeeping etc., are carried out at minimum cost and that substandard/ rejected workmanship is not costed to COMPANY Account. See (d) below. Submits written reports (daily, monthly and at end of contract) on quality of contractor's services to ensure correct allocation of labor/materials costs (whether to COMPANY account or backcharged to CONTRACTOR in the case of substandard work). End of contract report will be used when contract renewal is being considered. Quality of workmanship, Safety performance and productivity will all feature in these reports. Submits a daily report on his Insulation jobs in progress and the category and number of worker allocated to each job, so that compliance with Term Maintenance Contract can be verified. Participates in the development of job safety analysis ,tool box talks related to insulation jobs Organizes and directs the safe and efficient maintenance of plant and mobile equipment (used for hot and cold insulation work) in accordance with the agreed maintenance and safety procedures. Prepares written reports on the condition of the plant. Performs other related of similar duties, such as preparing his crew time sheets, store s stock requisition, incident reports, special technical reports etc. In line with COMPANY requirements and Management directives, undertakes planned general Inspection and conducts Tool Box meetings. Initiates and monitors follow-up actions arising from both. Provides work direction to Insulation Foremen/Charge hand. Also constantly supervises his insulation crew on all kinds of insulation jobs Moderate, involving walking, standing and lifting 50% of the working time.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Reports to Insulation Site Superintendent/Maintenance Support Services Supervisor Works according to established procedures, policies and approved programs. Within these parameters, exercises latitude in planning and completed work according to required standards. Work is subject to follow-up and review by Insulation Site Superintendent /Maintenance Services Engineer/ Supervisor depending upon the circumstances. Co-ordinates and monitors the activities of his Insulation Foremen/Charge hand. Performs Quality Assurance/Control to a standard established by COMPANY. Co-ordinates the daily running of hot and cold insulation works of his insulation crew . Includes planning and scheduling routine work, responding to emergency work, obtains permits for vehicle entry, cold work, man entry, obtaining materials, approves Material Requisitions, etc. Ensures that the standard and quality of work executed by his team (Insulation) including cladding, foam injection, sheet metal work, housekeeping etc., are carried out at minimum cost and that substandard/ rejected workmanship is not costed to COMPANY Account. See (d) below. Submits written reports (daily, monthly and at end of contract) on quality of contractor's services to ensure correct allocation of labor/materials costs (whether to COMPANY account or backcharged to CONTRACTOR in the case of substandard work). End of contract report will be used when contract renewal is being considered. Quality of workmanship, Safety performance and productivity will all feature in these reports. Submits a daily report on his Insulation jobs in progress and the category and number of worker allocated to each job, so that compliance with Term Maintenance Contract can be verified. Participates in the development of job safety analysis ,tool box talks related to insulation jobs Organizes and directs the safe and efficient maintenance of plant and mobile equipment (used for hot and cold insulation work) in accordance with the agreed maintenance and safety procedures. Prepares written reports on the condition of the plant. Performs other related of similar duties, such as preparing his crew time sheets, store s stock requisition, incident reports, special technical reports etc. In line with COMPANY requirements and Management directives, undertakes planned general Inspection and conducts Tool Box meetings. Initiates and monitors follow-up actions arising from both. Provides work direction to Insulation Foremen/Charge hand. Also constantly supervises his insulation crew on all kinds of insulation jobs Moderate, involving walking, standing and lifting 50% of the working time.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Drafting Trainer is responsible for planning, delivering, and evaluating technical training programs in drafting for trainees and employees.<br> The role involves classroom instruction, practical demonstrations, assessment of trainee performance, and the development of training materials.<br> The trainer ensures that trainees acquire the knowledge and skills required to perform drafting work in accordance with industry standards and organizational requirements, particularly within the Oil &amp; Gas sector.<br> Plan, prepare, and deliver classroom and practical drafting training programs covering basic, intermediate, and advanced drafting techniques and standards.<br> Develop and maintain training materials, including lesson plans, presentations, training manuals, quizzes, examinations, and instructional resources.<br> Assess trainee performance through written and practical evaluations, provide constructive feedback, and recommend improvement plans.<br> Monitor trainee attendance, progress, and classroom discipline to maintain an effective and productive learning environment.<br> Maintain accurate training records, assessment results, and documentation in accordance with company procedures.<br> Ensure training activities comply with company policies, engineering standards, and Health, Safety, and Environment (HSE) requirements while supporting continuous improvement of training programs.<br> Requirements.<br> Bachelor's Degree in Engineering, Associate Degree/Two-year Diploma in Drafting Technology, or High School/Vocational Diploma in Engineering Drawing or Drafting Minimum 4 years of relevant Oil &amp; Gas industry experience (with a degree) or 11 years (without a degree).<br> Fluent in spoken and written English with a minimum of IELTS 6.<br>0 or equivalent TOEFL score (Arabic proficiency is an advantage).<br> Proficiency in MicroStation and/or AutoCAD , with experience in mechanical, civil, structural, or architectural drafting.<br> Experience in training, mentoring, coaching, or delivering classroom and practical technical instruction.<br></span> </div>

Job Description<br><br> Inspect structural works on-site including concrete, steel, formwork, rebar, precast elements, and associated civil infrastructure. Monitor contractors’ activities to ensure compliance with approved shop drawings, method statements, materials, and relevant specifications. Report any non-conformances, delays, or deviations from the contract documents to the Site Engineer or Resident Engineer. Witness material testing and ensure the correct implementation of quality control procedures. Maintain comprehensive site records including daily inspections, progress updates, and photographic evidence. Review and verify contractor’s daily reports and check the adequacy of manpower and equipment on-site. Coordinate with other discipline inspectors to resolve interface issues and ensure proper integration of works. Participate in technical and progress meetings as required. Assist in reviewing method statements and ITPs from a site implementation perspective. Ensure that all health, safety, and environmental regulations are adhered to on-site. <br><br><br>Responsibilities<br><br> Diploma or Bachelor's Degree in Civil Engineering or a related discipline. Minimum 7 years of relevant experience in structural inspection, preferably on infrastructure or roads & highways projects. Prior experience working on Ashghal projects or with a GEC in Qatar is highly preferred. Good understanding of structural construction methods and quality control. Familiar with international codes and standards (e.g., ACI, BS, ASTM). Strong communication skills and ability to write clear technical reports. Proficient in Microsoft Office and construction management software (preferred). <br><br><br>Imagine a better future for you and a better future for us all.<br><br>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself?<br><br>With us, you can. Apply today.<br><br>Qualifications<br><br>What if you could do the kind of work the world needs?<br><br>At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you.<br><br>Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.<br><br>With us, you can. Apply today

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Join Saipem and engineer a sustainable future. We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as "One Company", our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.</p><p>Project: QMS Gladiator COMP 2</p><p>Job Title: Instrumentation Engineer</p><p>Location: Offshore Qatar</p><p>Job Description:</p><p>Mission</p><p>Perform Project technical tasks assigned by the Instrumentation Discipline Lead consisting in design, checking, layout definition, installation drawings and material definition, validation, testing and engineering of process measuring sensors, process actuators, installation elements and process safety elements</p><p>Interface and coordinate with the other Project Team Specialists and Designers</p><p>Coordinate technical activities performed either by insourcing either by outsourcing</p><p>Tasks</p><p>The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.</p><p>Tasks include:</p><p>A - Development Technology know how and Commercial support</p><p>B - Feasibility</p><p>C - Bidding phase/Commercial proposal development</p><p>Prepare Instrumentation elements (tagged items and bulk material), quantities for cost and erection works estimates</p><p>Support Discipline Lead to define man hours and cost estimates</p><p>D - Project Execution</p><p>Review Client technical documentation and requirements</p><p>Coordinate subcontracted engineering activities and control subcontracted engineering documents</p><p>Define engineering design basis and guidelines</p><p>Prepare the technical documentation for Instrumentation elements material and services requisitions and prepare, according to internal procedures, the technical evaluations</p><p>Provide technical support to Project Team</p><p>Optimise Instrumentation design ensuring minimal cost and complexity in compliance with the contractual and safety requirements</p><p>Prepare Instrumentation technical specifications</p><p>Prepare Instrumentation data sheets</p><p>Prepare Instrumentation installation specifications and drawings</p><p>Prepare Instrumentation BOQs and MTOs</p><p>Participate to P and ID mechanization</p><p>Validate Vendor control valves and safety valves sizing calculations</p><p>Validate Vendor measurements elements sizing calculations</p><p>Coordinate engineering activities</p><p>Ensure Instrumentation 3D modeling design activities</p><p>Participate to F.A.T. activities ad Vendor workshop</p><p>E - Construction and start up</p><p>Provide technical and engineering support to construction Team</p><p>Perform site engineering activities during construction and commissioning phases</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: Master's Degree/bachelor's degree in: Engineering</li><li>Experience: 5 + Years</li><li>Languages: English Language skills required (and any other specified by Project)</li><li>Technical Skills: Instrument &amp; Controls Engineer</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome. To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection. Report item wise visual, dimensional, quantities with UOM in the Inspection report with clear status (Accepted / Rejected) identified. Shall be able to justify the reasons for rejections to raise complaint Notifications to suppliers. Shall be responsible for segregation of accepted / rejected / Quarantine Materials after physical Inspection of materials Ensure proper tracking systems are followed to keep the records of Inspection documents and retrieval when required. Ensure resolution of Certification CNR in co-ordination with stake holders and release of accepted materials from SAP Quality Blocks as applicable. Independently responsible for Materials Inspected. Shall be able to justify queries / rejections from warehouses or end users and resolve the issues. Carry out Preservation Inspection and old stock material Inspection as required from time to time and submit Inspection reports. Shall be able to Drive the Car and make inspection visits to the Warehouse locations as directed. Responsible for housekeeping of Inspection area in compliance to HSE regulations. Adhere to section work instructions / guidelines to perform the inspection activities. Prepare section weekly / monthly reports and submit to Sr. Material Engineer (Insp)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or higher in Engineering under respective discipline (Mechanical / Metallurgy / Electrical &amp; Instrumentation). A minimum of 10 years' experience in QA/ QC &amp; Inspection environment with a minimum of 6 years' experience with Oil &amp; Gas / Allied process industry out of which at least 5 years should be relevant to Materials Inspection. Knowledge of General Engineering Practices / International Standards Well-versed and thorough knowledge in relevant international standards API, ASME, ISO, NEMA, IEEE, IEC, NFPA, BASEEFA, ATEX, ANSI, ASTM, TEMA, BS and related codes / standards / specifications &amp; statutory regulations Able to understand and interpret specifications &amp; regulations required to deliver the job function effectively. Good command of certification requirements for various materials and plant equipment. Capable of interpreting technical drawings, data sheets and specifications. Shall be Computer literate with knowledge of ERP software (SAP) and MS office Good written and spoken English, problem solving skills, technical communication and interpersonal skills Should have valid Qatar driving license. Capability to understand and follow international safety standard followed in Oil &amp; Gas industry. IOSH certificate Managing Safely or equivalent is mandatorily required prior to start working.</p><p></p></section>

Diamond Professional Trading and Contracting ( Dia PRO) is looking to hire Sales Executive for Qatar Branch <br>Dia PRO products range is :Cutting Blades for concrete , marble , granite , ceramic , hollow core slabs , wood & steel Coring Machine Concrete cutting machines Drill Bits Concrete grinding machine<br>Candidate should have the following :1- English Speaking 2- Qatar Driving Licence 3- Minimum 2 years experience in sales for building material items 4- Preferred Civil Engineer . <br> Plz send CV to career1234@yahoo.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Estimation and Tendering Manager develops the Estimation and Tendering strategic objectives and plans. This role is responsible in developing high quality winning proposals for existing customers and potential clients and provides support to management during the pre-tender process starting from evaluating/ assessing tenders, assessing risk factors to arrive at bid decisions, and estimating all the required material, equipment, and manpower needs to be able to arrive at reliable cost estimates for bidding projects.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Oversee the organization’s estimating processes and activities to provide financial support for tenders, and projects reviews.</p><br> <p>Effective Tendering Management that will result to winning bids and contracts of projects.</p><br> <p>Effective budget preparation that will result to high profit and business continuity.</p><br> <p>Provide leadership in processes of construction cost estimates, valuation of engineering work, and budgets.</p><br> <p>Establish and maintain the estimating and tendering evaluation procedures.</p><br> <p>Study, analyze and evaluate tender documents in order to identify risk factors, ensuring that technical terms comply with the relevant standards and communicates with all concerned department for the overall risk assessment and bid decision.</p><br> <p>Review and finalize project cost estimates as prepared by the Estimation Engineer in terms of the required material as per bill of quantities (BOQ), amount of work, material/ equipment/ and manpower requirements during the tendering phase including all systems, products and services to client specifications/ requirements.</p><br> <p>Lead in providing all the necessary project clarifications/ information upon project award to the Project Manager as per the project budget; advises the Project Manager on contractual rights, remedies which has been taken into consideration during tendering.</p><br> <p>Lead, manage and direct the Estimation Managers and Managing QS team that will result in winning bids and contracts of the projects.</p><br> <p>Review CCS (Candy) for estimates of work based on take-offs and productivity information prepared by Estimation Manager.</p><br> <p>Review all Tender and Estimating documents including Instruction to Tenderer’s, Contract Conditions, BOQ, Specifications and Tender Drawings.</p><br> <p>Advise the Tender team for further procedure and deploy a particular team for individual tenders.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Direct and manage the review and update of the scoping and estimating system within the organization to ensure the delivery of an estimating process that meets the requirements set by the organization for the estimating system by producing estimates that are accurate to the degree of accuracy specified and within the time required as well as verifying the data in the estimating system to ensure its validity, accuracy and currency.</p><br> <p>Review of Tender Appraisal with Brief description of Scope of work, Key dates, project details, Commercial and Contract conditions, Insurance requirements, Competition list, etc.</p><br> <p>Guide the Estimation Managers and Managing QS in the preparation and distribution of Subcontractor's "RFQ" letters and update with tender bulletin and addenda.</p><br> <p>Finalize estimation of all direct and indirect costs and consolidates tender documents for management review and approval.</p><br><br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>In-depth understanding of estimation techniques, including cost analysis, quantity take-offs, and risk assessment, to produce accurate project estimates.</p><br> <p>Proficiency in tendering processes, including bid evaluation, proposal preparation, and contract negotiation, to secure new business opportunities.</p><br> <p>Strong project management skills, including the ability to lead multidisciplinary teams and prioritize tasks to meet tight deadlines.</p><br> <p>Excellent communication and interpersonal skills to liaise effectively with clients, subcontractors, and internal stakeholders.</p><br> <p>Advanced proficiency in relevant software tools such as estimating software, project management systems, and Microsoft Office suite.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>Quality<br>Leadership<br>Cost Management L4<br>Stakeholder Engagement &amp; Communication L4<br>Build High-Performing Teams<br>Contract/Bid Documents L4<br>Speed of Execution<br>Project Estimating L4<br>Build Process and Systems<br>Document &amp; Record Control L4<br>Agility<br>Provide Direction<br>AI Fluency<br>Drive Cost Optimization<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or any related field<br><br><br><br> </div>

The Mechanical Fitter is responsible for maintaining, troubleshooting, and repairing and overhauling machinery to company standards.<br>Responsibilities<br>Apply skills and knowledge and ability to ensure target production throughput rate or objectives are safely executed in line with Section Plan, KPIs, Qatar Shipyard Technology Solutions Values and IMS system. Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures and any legislative requirements. Adhere to health, safety, security and environmental policies, procedures, instructions and controls for the safety of self and others. Demonstrates proficiencies in pneumatics, hydraulics, engines, controls, machine component clearances / fits and an overall understanding machine operation and function. Ensure compliance to quality management procedures and controls to deliver high quality services and products. Troubleshoot and repair electrical and mechanical problems related to the production equipment. Assist Supervisor and Engineer in preparation of Root Cause Analysis Reports. Identify machine defective components and parts and communicate this to Supervisor and Engineer. Assist Supervisor and Engineer in commissioning of new machinery or re-commissioning of repaired machinery. Read technical drawings, work orders and production schedules to determine product or job instructions and specifications. Ensure that jobs are carried out as per schedule and steps stipulated in the maintenance job cards. Use and place materials in an economical manner. Performs work safely and utilizes safety equipment properly. Understands and follow all yard safety rules and regulations. Maintains quantum and quality of work set. Maintains tools and equipment. Maintains and upkeep housekeeping. Follows instructions from his superior and carry out his tasks in a safe and productive manner. Follows all safety procedures and report lapses, if any. Perform any other assigned duties and responsibilities. Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.<br>Qualifications<br>Technical Certificate in Machine Maintenance, Mechanical Maintenance or Electrical Maintenance. Or Machine Repair Apprenticeship<br>Required Skills<br>Skills and knowledge related to machinery maintenance and repair.<br>Preferred Skills<br>Mechanical Maintenance, Preventive Maintenance, Corrective Maintenance, Machinery Troubleshooting, Mechanical Repair, Hydraulic Systems, Pneumatic Systems, Industrial Equipment Maintenance, Rotating Equipment Maintenance, Fault Finding & Diagnostics, Machine Overhaul Commissioning & Recommissioning, Technical Drawing Interpretation, Equipment Inspection, Root Cause Analysis (RCA), Plant Maintenance, Workshop Maintenance, Shipyard Operations, Permit to Work (PTW), HSE Compliance

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Technical and Engineering Manager is responsible for all engineering/technical aspects of the Company's operations, inclusive of value engineering opportunities, construction and overall methodology, method statements, engineering design drawings, shop drawings and material submittals and follow up approval.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Lead the design team in creating innovative, high-quality engineering solutions.</p><br> <p>Manage design projects from concept to completion, ensuring adherence to timelines and budgets.</p><br> <p>Provide expert technical guidance and support to design and engineering teams.</p><br> <p>Develop and enforce design standards, procedures, and best practices.</p><br> <p>Oversee quality assurance processes to ensure all designs meet industry standards and client requirements.</p><br> <p>Allocate resources effectively to support design and technical projects.</p><br> <p>Work closely with cross-functional teams, including product development, marketing, and manufacturing, to ensure cohesive project execution.</p><br> <p>Drive innovation in design methodologies and technologies to maintain competitive advantage.</p><br> <p>Identify and mitigate risks associated with design and technical projects.</p><br> <p>Promote continuous improvement initiatives within the design and technical teams to enhance efficiency and effectiveness.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Advanced Knowledge in engineering principles, techniques, policies, and procedures.</p><br> <p>Excellent knowledge of material engineering properties and local/global availability of materials with excellent technical skills and ability to organize and oversee preparation of technical drawings.</p><br> <p>Knowledge of Project Management.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Cost Management L4<br>QA/QC L4<br>Geotechnical Engineering L4<br>Drawings/Specifications L4<br>HSE L4<br>Build High-Performing Teams<br>Provide Direction<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering<br>Profesional degree in MMUP Engineer Registration (UPDA)<br><br><br><br> </div>