وظائف مهندس انظمة مدمجة في قطر

<p>Initiate and gain approval for work permits to facilitate the execution of assigned tasks in compliance with COMPANY safety requirements. Conduct toolbox meeting to discuss scheduled work activities and ensure correct tools and safety equipment are available prior to commencement of work. Carry out the assigned day-to-day routine and non-routine maintenance jobs in the Automation systems installed in COMPANY. Ensure that the work is completed on time, meeting COMPANY quality standards. Carry out ICS computer maintenance including Antivirus and Microsoft Security Patch update, operating system configurations, basic troubleshooting of hardware/software issues. Ensure Automation assets are maintained in compliance with the COMPANY cyber security requirements. Support the installation, testing and Commissioning activities of ICS projects / upgrades. Ensure good housekeeping to secure the cleanliness of the workplace. Comply with COMPANY Life Saving Rules as per "PSa-001 Life Saving Rule" Document. Participate in the call duty to provide maintenance support outside working hours. Support the team to achieve the section/department KPIs. Comply with all relevant procedures of COMPANY Integrated Management System comprising of Occupational Health and Safety, Quality, Environment, Responsible Care, IFA Product Stewardship &amp; energy Management System</p><p>Maintenance of Distributed control system, Safety Instrumented System, Compressor control system:</p><p>Maintain the Automation Systems to ensure the highest uptime and MTBF. Establish and implement various maintenance schedules for the automation systems as recommended by OEM. Supervise the work of staff for conformity, good engineering practices, international standards, functional safety, and Cyber Security compliance. Execute and support various Automation Projects, prepare cost proposal and coordinate - engineering tasks, planning, procurement, manpower hiring, erection &amp; commissioning. Work closely with all stake holders and vendor representatives, conduct necessary project meetings and acceptance tests. Follow company procedures for change management. Planning, prioritization, execution and monitoring of engineering activities to ensure compliance to sound engineering principles and practices. Develop new control strategies for enhanced controllability and energy optimization. Implement and regularly follow up the Cyber security controls and compliance requirements set by the company to protect the automation assets and to ensure business continuity. Analyze, determine root-cause, and recommend remedial solutions for problems referred from line maintenance teams. Organize the gathered information to improve the Automation System Maintenance and uptime. Maintain the existing frame contracts. Spares planning and periodic review of ROL, based on consumption, to ensure spares availability. Keep informed of technological developments in your area of responsibility to identify and recommend opportunities for increased effectiveness and/or cost reduction. Work closely with SAS suppliers and keep up to date with the latest development in control and instrumentation systems. Review inputs for development of group operating budget ensuring adequate provision has been made for the funding of all anticipated activities. Monitor performance against approved levels to ensure effective cost control. Ensure that the technical Documentation of SAS are current. Continuously monitor and optimize the work process and execution. Training of new and/or trainee Engineers to ensure that they are equipped with the necessary skills to independently perform their tasks. Exchange knowledge with colleague Engineers.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Engineering degree in in Instrumentation / Electronics discipline (12+4 years)</p><p>Minimum 10 years of maintenance experience in Industrial Control Systems in Petrochemical or Fertilizer industries.</p><p>Hands-on Maintenance and Troubleshooting experience of industrial automation system such as DCS/ESD Control systems, Turbo Machinery Control and Protection Systems, Cyber Security guidelines and networking etc.</p><p>Engineer and Supervisor shall have knowledge of and ability to communicate effectively in written English and spoken English and to write business or technical reports effectively in English language.</p><p>Technicians shall have working level proficiency of Read, Write, speak and Understand competency in English language.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Meet the Team</b></p><br><br><p><span>As a Solutions Engineer at Cisco, you will work closely with the Service Provider Sales team to identify the needs one of Cisco’s most strategic Service Provider accounts in Qatar, demonstrate Cisco solutions, and design tailored products that drive digital transformation. You will provide expert technical guidance focused on customer success and aligned outcomes, while enjoying the flexibility to handle your work in a way that delivers the best results for both the customer and your team. This role requires solution engineer who combines, Enterprise networking, Data Center architecture solutions with strong AI, automation capable of guiding customers toward fully autonomous, AI-driven networks.&nbsp;</span></p><br><br><br><p><b>Your Impact</b></p><br><br><p>As a Solution Engineer, you will play a pivotal role in accelerating Cisco's leadership by acting as a trusted technical advisor and solution architect. Your expertise will be crucial in translating service provider objectives into comprehensive, impactful architecture and solution strategies across Cisco’s diverse portfolio. Serve as the technical lead within the account team, building trusted advisor relationships with senior IT and business leaders.</p><br><br><ul><li>Own the end-to-end technology vision and architecture, spanning Service Provider networks, Data Center, Cloud, Automation, Cybersecurity and AI driven operations.&nbsp;</li><li>Lead the design of large-scale, highly scalable Data Center, Enterprise Networking architectures, aligned with future autonomous networking models.&nbsp;</li><li>Lead AI-driven network transformation initiatives, including:&nbsp;<ul><li>Applying AI/ML and LLM models to network operations, assurance, planning, and optimization&nbsp;</li><li>Positioning Agentic AI for closed-loop decision making, intent execution, and self-healing networks&nbsp;</li><li>Integrating AI capabilities across transport, Data Center, cloud and cybersecurity domains&nbsp;</li></ul></li><li>Articulate and demonstrate the business impact of AI on network efficiency, cost optimization, resilience, and customer experience.&nbsp;</li><li>Lead network automation and orchestration strategy, with deep expertise in DNA Center, Nexus Dashboard, Cisco Intersight and Cisco Crosswork Automation portfolio&nbsp;</li><li>Collaborate with account teams, product leaders, and executives to influence roadmaps, investment decisions, and long-term transformation strategy.&nbsp;</li><li>Develop and present high-impact technical proposals, architectures, and demonstrations.</li><li>Drive proof of concepts (POCs), pilots, and solution validation to accelerate decision-making and adoption.</li></ul><br><p><b>Minimum Qualifications</b></p><br><br><ul><li>5+ years of proven experience in presales, consultative, or solution architect roles, demonstrating a proven presales track record in designing and deploying solutions, particularly in routing, switching, data center and cloud.</li><li>Technical expertise in:<ul><li>Scalable, AI-ready Data Center architecture including compute, storage solutions (Cisco or 3rd party), data center networking, Cisco ACI</li><li>Enterprise network architectures using Cisco routing, switching and wireless solutions, SD-WAN, SASE, modern AI Ops/ML Ops, and programming/scripting capabilities.</li><li>Service provider network architecture spanning Access, transport, Data center, and Internet with related technologies.</li></ul></li><li>Strong AI and automation expertise, including:<ul><li>Applied understanding of AI/ML models for networking use cases such as assurance, optimization, planning, and predictive operations</li><li>Architectural or hands-on knowledge of LLM-based systems for operational insights, automation, and decision support</li><li>Experience designing or positioning Agentic AI frameworks to enable closed-loop, intent-based, and autonomous network operations</li></ul></li><li>Strong understanding of Cisco technologies and architecture, with&nbsp;proven cross-architecture experience&nbsp;to translate client objectives into comprehensive solutions across Cisco’s full portfolio.</li><li>Ability to simplify complex technical concepts for both technical and non-technical audiences, coupled with&nbsp;strong executive-level communication skills.</li><li>Solid experience engaging directly with customers, applying&nbsp;consultative selling&nbsp;techniques, understanding&nbsp;financial pain points, and aligning solutions with&nbsp;customer business models&nbsp;to drive&nbsp;value realization and adoption.</li></ul><br><p><b>Preferred Qualifications</b></p><br><br><ul><li>Bachelor’s degree in electrical engineering, Computer Science, or a related field.</li><li>Cisco certifications (e.g., CCNA, CCNP, CCIE) or equivalent vendor credentials.</li><li>Experience in Enterprise networking solutions: campus and branch, secure network architecture, access, wireless, wide area network, visibility and monitoring solutions</li><li>Understanding of data center technologies: hyperconverged infrastructure, cloud computing and networking, Data center fabric, servers, unified edge, SDN controller, </li><li>High level understanding of Service Provider Routing and Transport, including SR-MPLS and SRv6, Mobility, 5G Core network design and evolution</li><li>Ability to work effectively, add value as a team member, and assume a proactive approach to your career, demonstrating a&nbsp;growth mindset&nbsp;and&nbsp;adaptability.</li><li>Excellent written and verbal communication, listening, and strong presentation skills.</li><li>Experience in Qatar market is highly desirable, with Arabic language proficiency considered a significant plus.</li></ul><br>Why Cisco?&nbsp;<p>At Cisco, we’re revolutionizing how data and infrastructure connect and protect organizations in the AI era – and beyond. We’ve been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint.</p><br><br><p>Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you’ll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere.&nbsp;</p><br><br><p>We are Cisco, and our power starts with you.&nbsp;</p><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Job Description: Associate Planning Engineer Doha, Qatar Parsons is looking for an amazingly talented Associate Planning Engineer to join our team! In this role you will get to developing, implementing, and maintaining scheduling and project controls functions on a portfolio of projects (Design and construction projects).</p><p>What You'll Be Doing:</p><ul><li>knowledge of project planning, budgeting, cost phasing and control from the project initiation to close out phases, utilizing computer based systems.</li><li>Verifying actual progress and comparing actual performances to original plans.</li><li>Monitoring, adjusting, and updating the cost plan and cash flows accordingly and the consolidating of these results in monthly reports.</li><li>Implements and maintains an Earned Value Management System on the project.</li></ul><p>What Required Skills You'll Bring:</p><ul><li>Bachelor's Degree in Engineering or Construction Management or related field (or equivalent experience).</li><li>Typically 0+ years of related work experience.</li></ul><p>What Desired Skills You'll Bring:</p><ul><li>Requires basic engineering knowledge in electrical, mechanical, civil, or a related field.</li><li>PC skills including a working knowledge of Microsoft Office and Primavera Project Management /P6 and Primavera Contract Management / Expedition, and Power BI.</li><li>Must have good command of English both written and spoken, good communication and presentation skills.</li></ul><p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information. We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p><p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/ .</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Engineering or Construction Management or related field (or equivalent experience).</p><p>Typically 0+ years of related work experience.</p><p>Requires basic engineering knowledge in electrical, mechanical, civil, or a related field.</p><p>PC skills including a working knowledge of Microsoft Office and Primavera Project Management /P6 and Primavera Contract Management / Expedition, and Power BI.</p><p>Must have good command of English both written and spoken, good communication and presentation skills.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Oversee the operation, maintenance, testing, calibration, replacement, and performance monitoring of all types of water metering systems to ensure reliable and accurate measurement.</li><li>Diagnose, troubleshoot, and resolve technical issues related to water meters, metering accessories, communication devices, and associated systems to maintain operational reliability.</li><li>Monitor water meter installation, replacement, upgrade, commissioning, and maintenance activities to ensure compliance with quality standards, project schedules, and technical requirements.</li><li>Review and analyze water meter performance data, identify trends and operational issues, and prepare technical reports with findings, recommendations, and corrective actions.</li><li>Support continuous improvement initiatives to enhance water metering technologies, measurement accuracy, asset reliability, and operational efficiency.</li><li>Develop, implement, and monitor preventive, predictive, and corrective maintenance programs to maximize the performance and lifecycle of water metering systems.</li><li>Conduct technical inspections, site assessments, testing, and verification of water metering installations to ensure compliance with approved specifications and contractual requirements.</li><li>Provide technical expertise on water metering systems, equipment selection, technology evaluation, and industry best practices to support engineering and operational activities.</li><li>Perform any other duties and responsibilities assigned by the immediate supervisor or management to support departmental and organizational objectives.</li></ul> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities:</p><p>•<span > </span>Technical Pre-Sales Support: Work closely with the sales team to understand client requirements for fire alarm and firefighting systems. Conduct site visits, assess existing infrastructure, and gather all necessary technical data.</p><p>•<span > </span>Solution Design &amp; Proposal Development: Design conceptual and detailed fire protection system layouts (e.g., sprinkler systems, fire suppression systems, fire alarm systems) based on project specifications, relevant codes (NFPA, QCDD), and client needs. Prepare comprehensive technical proposals, including system architecture, scope of work, and compliance statements.</p><p>•<span > </span>Cost Estimation: Prepare accurate and detailed cost estimates for materials, labor, equipment, and other associated expenses for proposed fire alarm and fire fighting projects. This involves analyzing tender documents, drawings, specifications, and obtaining competitive pricing from suppliers.</p><p>•<span > </span>Bill of Quantities (BOQ) Preparation: Develop precise BOQs that itemize all necessary components and services for the proposed fire safety solutions.</p><p>•<span > </span>Client Presentations &amp; Technical Clarifications: Present technical solutions and proposals to clients, addressing their queries and concerns. Provide technical clarifications during the bidding process and negotiations.</p><p>•<span > </span>Value Engineering &amp; Optimization: Identify opportunities for value engineering and cost optimization without compromising system performance or compliance.</p><p>•<span > </span>Supplier &amp; Vendor Coordination: Liaise with suppliers and manufacturers to gather product information, specifications, and pricing for estimation purposes.</p><p>•<span > </span>Market &amp; Regulatory Knowledge: Stay updated on the latest fire safety technologies, industry trends, and changes in local (QCDD) and international (NFPA) fire codes and regulations.</p><p>•<span > </span>Collaboration: Work effectively with design, procurement, and project execution teams to ensure a smooth transition from pre-sales to project delivery.</p><p>Key Skills:</p><p>•<span > </span>Technical Expertise: Strong theoretical and practical knowledge of various fire alarm systems (conventional, addressable, voice evacuation), fire fighting systems (sprinklers, deluge, foam, clean agent, hydrants, pumps), and emergency lighting.</p><p>•<span > </span>Estimation Proficiency: Proven experience in accurate cost estimation for fire safety projects, including material take-offs and labor cost calculations.</p><p>•<span > </span>Code &amp; Standard Compliance: In-depth understanding and practical application of NFPA codes (e.g., NFPA 13, 20, 72) and local regulations, particularly QCDD requirements.</p><p>•<span > </span>Design Software: Proficiency in CAD software (e.g., AutoCAD, Revit) for system design and layout.</p><p>•<span > </span>Analytical &amp; Problem-Solving: Excellent analytical skills to interpret complex project documents and identify optimal solutions.</p><p>•<span > </span>Communication &amp; Presentation: Strong verbal and written communication skills to articulate technical concepts clearly to diverse audiences (clients, sales team, technical staff). Ability to create and deliver compelling presentations.</p><p>•<span > </span>Commercial Acumen: Understanding of business development processes, sales strategies, and the ability to contribute to revenue generation.</p><p>•<span > </span>Attention to Detail: Meticulous approach to ensure accuracy in estimations, proposals, and compliance.</p><p>•<span > </span>Negotiation Skills: Ability to support sales in commercial discussions and negotiations.</p><p>•<span > </span>Bachelor's Degree: Bachelor’s degree in mechanical, Electrical, or Fire Engineering (or a related field) is required.</p><p><br></p><p>Qualifications</p><p>1.<span > </span>Bachelor of Civil Engineering or equivalent&nbsp;</p><p>2.<span > </span>Minimum 3+ Years experience in the relevant field</p><p>3.<span > </span>Candidates should be locally available in Qatar.</p><p>4.<span > </span>NOC must be available</p><p>5.<span > </span>Preferably Arabic speaking</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Download Requirements</p><p></p></section>

<p>Guildhall is currently supporting a leading engineering company in Doha, Qatar on major road infrastructure and pavement asset management projects. We are currently recruiting for an experienced Pavement Data Collection / Processing Engineer to join their growing team. This is a key role responsible for processing, validating, and quality checking pavement condition data while ensuring the highest standards of accuracy, compliance, and technical excellence across pavement survey projects. Key Responsibilities: - Process, validate, and analyze pavement condition data collected from automated survey systems, ensuring accuracy, consistency, and compliance with project specifications. - Perform QA/QC reviews of pavement data, identify discrepancies, implement corrective actions, and maintain high-quality documentation throughout project delivery. - Conduct pavement condition assessments, evaluate pavement distresses, and support pavement asset management in accordance with ASTM D6433, LTPP, and PCI standards. - Utilize LCMS-2, ROMDAS, Data View, PMS, and GIS platforms (ArcGIS/QGIS) to process, manage, and visualize pavement survey data. - Collaborate with project teams to prepare technical reports, provide project updates, and support the successful delivery of pavement engineering projects.</p><p>-Bachelor's Degree in Civil Engineering, Pavement Engineering, Transportation Engineering, or a related discipline -5–10 years of experience in pavement engineering, pavement condition assessment, or pavement asset management -Strong experience in QA/QC of processed pavement condition data and pavement distress rating -Hands-on experience with LCMS-2 is essential -Experience reviewing and validating pavement distress data, including cracking, rutting, ravelling, bleeding, texture, and roughness -Good understanding of ASTM D6433, LTPP, and pavement condition rating systems (PCI preferred) -Familiarity with ROMDAS, Data View, or similar pavement data processing software -Experience with Pavement Management Systems (PMS) is highly desirable -GCC or international pavement survey project experience is preferred -Experience with ARAN, Hawkeye, or other pavement data collection systems is an advantage -Knowledge of ArcGIS or QGIS is beneficial -Basic Python or R scripting skills for data validation or automation are a plus</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Key Responsibilities<br></span><ul><li>Oversee installation, maintenance (preventive, predictive, and emergency), testing, calibration, and upgrading of all types of electrical meters, including smart meters<br></li><li>Ensure all electrical meter installations comply with company standards, approved specifications, and safety regulations<br></li><li>Troubleshoot electrical metering systems to ensure accurate, reliable, and uninterrupted meter readings<br></li><li>Coordinate with internal engineering teams, contractors, and service providers to enhance meter performance and data accuracy<br></li><li>Review meter communication systems and support integration with MDMS and related platforms<br></li><li>Monitor installation progress and operational performance, identifying defects, non-conformities, and improvement actions<br></li><li>Prepare technical reports and dashboards on installation status, system performance, and operational feedback<br></li><li>Facilitate root cause analysis and corrective action implementation for recurring issues, escalations, or repeated customer complaints, and report findings to leadership<br></li><li>Support preventive maintenance programs and continuous improvement initiatives for electrical metering systems<br></li><li>Ensure compliance with ISO requirements, Risk Management, ISMS, BCMS, and corporate governance frameworks<br></li><li>Ensure compliance with corporate Health &amp; Safety regulations<br></li><li>Remain available to respond promptly during emergencies or blackouts, including additional work hours when required<br></li><li>Perform any other duties assigned by the supervisor or management<br></li></ul><br><span>RequirementsRequirements<br></span><ul><li>Bachelor's degree in Electrical Engineering or a related engineering discipline<br></li><li>Minimum 9 years of relevant experience in electrical metering systems or a related field, preferably within a utility or large infrastructure environment<br></li><li>Strong understanding of electrical and smart metering systems<br></li><li>Working knowledge of MDMS, meter communication protocols, and electrical standards<br></li><li>Proven fault-finding and troubleshooting capabilities<br></li><li>Experience in meter installation, calibration, testing, and maintenance activities<br></li><li>Strong analytical, reporting, and coordination skills<br></li><li>Good communication and teamwork abilities<br></li><li>Ability to manage operational issues in field and system environments<br></li><li>Written and spoken English is essential; Arabic is preferred<br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Reviews Project Scheduling, Progress Measurement and Reporting requirements for execution of the project.</p><p>Software Proficiency: Advanced proficiency in Primavera P6 and Microsoft Project.<br>Core Scheduling: Strong knowledge of Work Breakdown Structure (WBS), Critical Path Method (CPM), resource loading, and schedule optimization.</p><p>Project Controls: Experience in project controls, progress measurement systems, earned value management, cash flow forecasting, and S-curve analysis. Schedule Management: Ability to develop, monitor, and control integrated project schedules covering engineering, procurement, fabrication, offshore installation, and commissioning activities. Offshore Operations: Knowledge of offshore construction methodologies, marine operations, heavy lifting, hook-up, commissioning, and shutdown planning. Safety &amp; Risk Systems: Familiarity with offshore platform operations, SIMOPS, HSE requirements, permit-to-work systems, and risk management. Work Environment: Experience in offshore fabrication yards, installation campaigns, and project execution environments. Preferred Advantage: Understanding of QatarEnergy project requirements is an advantage.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Engineering (PMP, PMI-SP certification) Years of Experience: 15+ years of experience in EPC/Oil &amp; Gas projects including 3-5 years in Offshore </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Location:</strong> Qatar<br><strong>Contract Duration:</strong> <strong>Initial 2-Month Contract (Extendable)</strong><br><strong>Employment Type:</strong> Contract</p><br><br>About the Opportunity<p>An established engineering consultancy in Qatar is seeking an experienced <strong>Senior Electrical Engineer - BIM</strong> to support the delivery of high-profile building and infrastructure projects. This is an <strong>initial 2-month contract with strong potential for extension</strong>, making it ideal for professionals who are immediately available or can mobilise at short notice.</p><br><br><p>The successful candidate will be responsible for producing high-quality electrical designs, developing BIM models, coordinating with multidisciplinary teams, and ensuring all engineering deliverables meet project specifications, international standards, and client requirements.</p><br><br>Key Responsibilities<ul><li>Design and develop LV/MV electrical power distribution systems for commercial, residential, healthcare, hospitality, and mixed-use developments.</li><li>Prepare electrical calculations including load calculations, cable sizing, voltage drop, short-circuit analysis, protection coordination, and fault level calculations.</li><li>Produce single-line diagrams, power layouts, lighting layouts, containment drawings, panel schedules, and detailed engineering documentation.</li><li>Design indoor, outdoor, and emergency lighting systems using Dialux or Relux.</li><li>Design fire alarm, emergency communication, public address, voice evacuation, and life safety systems in accordance with international standards.</li><li>Develop designs for ELV systems including CCTV, access control, structured cabling, BMS, IPTV, nurse call, and building automation systems.</li><li>Perform generator sizing, UPS calculations, power factor correction, harmonic analysis, and energy efficiency studies.</li><li>Develop accurate 3D electrical BIM models using Autodesk Revit MEP.</li><li>Participate in BIM coordination meetings and resolve multidisciplinary clashes using Navisworks.</li><li>Create, modify, and maintain Revit families for electrical equipment, lighting fixtures, panels, and containment systems.</li><li>Coordinate closely with architectural, structural, mechanical, and public health engineering teams throughout all project stages.</li><li>Prepare design documentation suitable for concept, detailed design, tender, and construction phases.</li><li>Ensure compliance with project BIM Execution Plans (BEP), Common Data Environment (CDE) procedures, and international engineering standards.</li><li>Support project managers and lead engineers in delivering projects on schedule while maintaining high-quality technical standards.</li></ul>Required Skills &amp; Technical ExpertiseElectrical Engineering<ul><li>LV &amp; MV power distribution</li><li>Load calculations and cable sizing</li><li>Protection coordination</li><li>Short-circuit analysis</li><li>Lighting and emergency lighting design</li><li>Fire alarm and life safety systems</li><li>ELV and ICT systems</li><li>Generator and UPS sizing</li><li>Power quality and energy efficiency studies</li></ul>BIM &amp; Design Coordination<ul><li>Autodesk Revit MEP</li><li>Navisworks Manage</li><li>Clash detection and multidisciplinary coordination</li><li>BIM Execution Plans (BEP)</li><li>ISO 19650 and BIM workflows</li><li>LOD 100-400 modelling</li><li>Common Data Environment (ACC/BIM 360 or equivalent)</li><li>Revit family creation and model management</li></ul>Software<ul><li>Autodesk Revit MEP</li><li>Navisworks</li><li>AutoCAD</li><li>Dialux / Relux</li><li>ETAP or SKM</li><li>Bluebeam Revu</li><li>Microsoft Office Suite</li></ul>Qualifications &amp; Experience<ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum <strong>8-10 years</strong> of electrical engineering design experience within building services or MEP consultancy environments.</li><li>At least <strong>3-5 years</strong> of hands-on BIM/Revit MEP experience.</li><li>Demonstrated experience delivering multidisciplinary building or infrastructure projects.</li><li>Strong understanding of IEC, NFPA, BS, and other relevant international electrical standards.</li><li>Experience working within BIM environments and coordinating across multiple engineering disciplines.</li><li>Previous experience on GCC projects is highly desirable.</li><li>Chartered Engineer status or Autodesk Revit Professional Certification is advantageous.</li></ul>Candidate Profile<p>We are looking for a proactive and technically strong professional who can work independently while collaborating effectively within multidisciplinary project teams. The ideal candidate will possess excellent communication skills, strong attention to detail, and the ability to manage multiple design deliverables within fast-paced project environments.</p><br><br><p>Candidates who are <strong>currently based in Qatar or the GCC</strong>, or who are <strong>available to mobilise immediately</strong>, will be highly regarded.</p><br><br>What We Offer<ul><li>Initial <strong>2-month contract with the possibility of extension</strong>.</li><li>Opportunity to work on prestigious engineering and infrastructure projects.</li><li>Collaborative and technically driven project environment.</li><li>Competitive contract package based on qualifications and experience.</li></ul> <br><br> </div>

Primary Purpose Of The Job<br><br>Function as a Senior Civil/Structural Engineer for a Power and Desalination Plant project, providing technical assurance over the Contractor’s civil and structural design from commencement through completion. The role requires independent technical capability to manage, review, verify and approve all civil and structural engineering deliverables associated with a power generation and desalination facility, including complex onshore and marine infrastructure.<br><br>The Senior Civil/Structural Engineer shall ensure suitability of civil and structural designs for site development, dynamic equipment foundations, very large prestressed potable water retaining structures, large‑scale drainage and earthworks, switching stations and electrical yards. Detailed design knowledge of the abovementioned facilities is required, including the ability to develop scopes of work and provide technical assurance for engineered elements.<br><br>Required Experience And Skills<br><br>Minimum 15 years of relevant post‑graduate experience, of which at least 10 years shall be related to power plant, oil & gas, or other heavy industrial projects. Experience in plant site development, including roads, earthworks, complex drainage systems, utility‑scale power plants, including heavy turbines and generator foundations associated with major industrial facilities. Design experience in large prestressed potable water retaining structures, and large seawater tanks and settlement basins. Design experience in nearshore and marine civil infrastructure, including seawater intake and brine discharge systems, nearshore civil works, and coastal protection infrastructure. Experience developing scope of work for geotechnical and Topographical investigation and interpreting outcome reports. Experience providing technical support during construction phase of mega‑projects, including resolution of complex civil and structural engineering issues during execution. Experience across Concept / Feasibility, FEED, and EPIC phases. Familiarity with US and European civil/structural codes and standards. Strong technical capability, with the ability to resolve complex engineering issues independently and without reliance on third‑party intervention. Proven ability to manage time, cost and quality in engineering projects within a multiple project environment. Excellent communications and presentation skills with fluency in English. Proven experience working in multicultural teams.<br><br>Educational Qualifications<br><br>Bachelor's degree in Civil or Structural Engineering Chartered Engineer / Professional Engineer status or equivalent is preferable.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Support Contractor to identify and submit the QA/QC documents (ITPs, QCPs, Welding / NDT / HT / Painting and other test procedures, MARs etc.,) in line with Construction program, their timely review and approval.</li> <li>Assist functional supervisor in review / approval of relevant QMS, Engg., &amp; Procurement documents, implementation of Quality Programs, and resolution of discipline matters escalated to the Project Management.</li> </ul><br><ul> <li>Ensure Implementation of Project QA/QC requirements at project site and suppliers / subcontractor's works complying to project specification and other technical requirements.</li> <li>Organize Pre-Activity Review meetings, attend Quality Walk through and QA/QC Weekly meetings.</li> <li>Undertake surveillance of on-site and off-site Structural / Piping / Pipeline shop and Field fabrication / Equipment Erection and associated inspection &amp; testing activities, Surface Preparation &amp; Painting activities, identify potential or actual non-conformances and direct contractor in taking necessary Correction, corrective and preventive actions.</li> <li>Initiate or ensure initiation of NCRs for the recurrent surveillance observations and non-conformities and coordinate / follow-up for RCA / Correction / Corrective /Preventive action proposals and timely close out.</li> <li>Monitor the progressive compilation of Material Test Certificates and Construction Records and their traceability.</li> <li>Monitor and verify the implementation of Preservation Management System.</li> <li>Ensure the Contractors maintain, update, and publish the IMTE Registers on regular basis and calibration records maintained.</li> <li>Ensure appropriate Systems / Processes / Procedures / Computer data base established by Contractor to maintain the Inspection and Test status during pre-fabrication, field erection, testing and statistical analysis of the data.</li> <li>Monitor the KPIs, Special processes and personnel performance.</li> <li>Participate in Project QHSE audits and Pre-Qualification Audits of Vend.rs / Suppliers / Sub-Contractors. Conduct ITP / QCP / MS / Process / Activity level compliance audits / Checks.</li> <li>Monitor Contactor/Sub-Contractor/Third party inspectors &amp; Engineers and Subordinates, performance, provides necessary support / guidance and reports to functional supervisor.</li> <li>Implement and enforce the elements of Company Quality Management System requirements applicable to your function.</li> <li>Exposed to Construction Site and Prevailing Climatic Conditions at least 50% of time.</li> <li>Ensure own safety and the safety of others who may be affected by Company business, whether the activity is under direct control or not.</li> </ul><br><ul> <li>Bachelor's degree in mechanical engineering (or Equivalent) from a recognized university.</li> <li>IRCA Certified QMS Lead Auditor.</li> <li>Welding Inspector Certification (CSWIP 3.1 / AWS-CWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP) is a must. Equivalent International Certifications acceptable.</li> <li>Having IIW-Welding Engineer / NDT level-3 and Certification in advanced NDT (PAUT, TOFD, Auto UT etc.,) will be an advantage.</li> <li>Professional membership / affiliations with recognized chartered or other professional institutions like ASNT / AWS / TWI / NACE / ASQ-CMQ&amp;OE, MCQI-CQP or similar is desirable.</li> <li>15 years' experience in the construction of major Green field or Brown-field Process Plants in Oil &amp; Gas industry including large scale solar (Photovoltaic) projects.</li> <li>Worked with major EPIC Contractors / End User in similar position in major projects with overall responsibility for the Quality of Piping / Mechanical discipline Construction and Commissioning activities. Sound working knowledge on QA/QC aspects, testing requirements and acceptance criteria related various Piping systems and Rotating / Stating Equipment and managing overall discipline's QA/QC aspects in major Oil and Gas Projects.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>* Manage relationships with key bulk water customers to ensure high service levels and customer satisfaction.<br><br>* Oversee the installation, maintenance and performance of water metering systems, ensuring metering accuracy and data reliability.<br><br>* Provide technical support on water metering, billing, and operational issues while coordinating timely resolution with internal teams.<br><br>* Monitor water consumption, service performance, and operational data, preparing reports and recommendations for continuous improvement.<br><br>* Coordinate with operations, metering and customer service teams to ensure uninterrupted service delivery.<br><br>* Ensure compliance with ISO standards, Health &amp; Safety regulations and company operational policies.<br><br>* Maintain accurate technical documentation, customer records and support customer engagement initiatives.<br><br></span><br><span>Requirements* Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related discipline.<br><br>* Minimum 9 years' experience in key account management, water distribution systems, or utility operations.<br><br>* Strong knowledge of water distribution networks, bulk water operations, and smart metering technologies.<br><br>* Proven skills in customer relationship management, technical problem-solving, data analysis, and reporting.<br><br>* Fluent in English (written and spoken); Arabic is preferred.<br><br></span><br> </div>

<p>We are looking for an experienced AI Engineer to join our team and help design, build, and scale intelligent systems that power real business solutions. You will work across LLMs, Computer Vision, Speech AI, and AI Infrastructure, embedding advanced AI into core business processes and client-facing products.</p><ul><li><strong>LLM Development:</strong> build chatbots, RAG systems, and automated document processing pipelines</li><li><strong>Computer Vision:</strong> Implement OCR for insurance documents, damage assessment from photos, and identity verification</li><li><strong>Speech AI:</strong> Develop transcription, voice analytics, and multilingual support solutions</li><li><strong>AI Infrastructure:</strong> Deploy and monitor AI models, integrate with cloud AI services</li><li><strong>Product Integration:</strong> Embed AI into business workflows, create AI APIs, and design user-friendly AI-powered experiences</li></ul><p><strong>Requirements</strong></p><ul><li>5+ years of experience in AI/ML engineering with a focus on production systems</li><li>Strong Python skills (advanced) + experience with FastAPI/Flask for API development</li><li>Hands-on experience with LLM tools: OpenAI API, LangChain, Hugging Face Transformers</li><li>Computer Vision expertise: OpenCV, PIL, YOLO, Detectron2 (or similar)</li><li>Deep learning frameworks: PyTorch or TensorFlow for fine-tuning models</li><li>Cloud experience: AWS / Azure / GCP AI services</li><li>Docker &amp; Kubernetes for AI application containerization and orchestration</li></ul><p><strong>Core AI/ML Competencies</strong></p><ul><li>Prompt Engineering designing effective prompts for LLMs</li><li>Fine-tuning and training custom LLMs adapting pre-trained models to business tasks</li><li>Experience RAG (Retrieval-Augmented Generation) working with vector DBs and embeddings</li><li>Computer Vision Pipelines from preprocessing to inference</li><li>Model Optimization quantization, pruning, ONNX for faster inference</li><li>Multimodal AI building solutions that combine text + images</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>5+ years of experience in AI/ML engineering with a focus on production systems</p><p>Strong Python skills (advanced) + experience with FastAPI/Flask for API development</p><p>Hands-on experience with LLM tools: OpenAI API, LangChain, Hugging Face Transformers</p><p>Computer Vision expertise: OpenCV, PIL, YOLO, Detectron2 (or similar)</p><p>Deep learning frameworks: PyTorch or TensorFlow for fine-tuning models</p><p>Cloud experience: AWS / Azure / GCP AI services</p><p>Docker &amp; Kubernetes for AI application containerization and orchestration</p><p><strong>Core AI/ML Competencies</strong></p><ul><li>Prompt Engineering designing effective prompts for LLMs</li><li>Fine-tuning and training custom LLMs adapting pre-trained models to business tasks</li><li>Experience RAG (Retrieval-Augmented Generation) working with vector DBs and embeddings</li><li>Computer Vision Pipelines from preprocessing to inference</li><li>Model Optimization quantization, pruning, ONNX for faster inference</li><li>Multimodal AI building solutions that combine text + images</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Lead and manage multi-discipline QA/QC Team (QC Engineers and Inspectors) within the Department and ensure that the Inspection Test Plans and procedures are in place and adhered to throughout the project life cycle.</li> <li>Guide departmental staff and Project Team on various activities related to latest version of ISO 9001 Standard, QMS system documentation and certification requirements.</li> </ul><br><ul> <li>Promote a culture of continual improvement in quality practices and conduct quality training sessions for site personnel and subcontractors.</li> <li>Support incident investigation and root cause analysis related to quality failures impacting safety or performance.</li> <li>Prepare the Departmental &amp; Project QMS (Quality Management System) documentation in accordance with Company requirements.</li> <li>And further Manage and follow-up on implementation of QMS compliance requirements in Contracts.</li> <li>Prepare Project Quality Plan (PQP), KPIs and ensure the alignment of Contractor's PQP / KPIs with that of Company's. Coordinate and ensure implementation of QMS compliance requirements during all phases of the projects by Project teams and Contractors and submit necessary reports /data on monthly / quarterly basis.</li> <li>Participate in pre-qualification of Contractors/Sub-Contractors and Vendors, as required, monitor, and enforce compliance with ISO 9001/Company Quality standards.</li> <li>Participate in technical bid evaluation of the Bidders to ensure that Company quality requirements are included, addressed, and understood.</li> <li>Review the Scope of Services (SOS) and Scope of Work (SOW) and ensure that Company quality and technical requirements are incorporated which include Contractor/Supplier's QA/QC and relevant engineering and construction deliverables and any other Technical / Company System documents.</li> <li>Review and Approve Contractors'/Vendors' QA/QC documentation/deliverables for engineering, procurement, and construction phases, including welding and testing procedures.</li> <li>Review and respond to technical queries and technical deviations regarding welding and non-destructive testing.</li> <li>Review Contractor/Supplier's engineering and construction deliverables with specific emphasis to QA/QC and coordinate with relevant engineering discipline specialists on issues related to materials/corrosion/special processes etc; to enforce compliance to contract requirements.</li> <li>Ensure Deviation and non-conformance control systems are implemented to meet the departmental compliance requirements.</li> <li>Verify the resolution of deviations related to corrective and preventive actions and proper closure of NCRs and CARs.</li> <li>Surveillance and oversee the quality of project Construction works by visiting all project sites, attending weekly/monthly meetings with contractor, monitor the site QC inspector's functioning etc.</li> </ul><br><ul> <li>Bachelor's Degree in Engineering (preferably Electrical, Instrumentation, Controls Engineering or related field) or higher educational qualification in engineering from internationally recognized Universities.</li> <li>IRCA Certified QMS Lead Auditor Certification or similar.</li> <li>ASNT Level-II Certifications in RT/MT/PT/UT is a plus.</li> <li>Professional certification / affiliation with internationally recognized Quality organizations like CQI or ASQ or similar is desirable.</li> <li>Minimum 15 years of relevant experience (Minimum of five (5) years lead experience) in Oil &amp; Gas Industry as part of an internationally recognized EPIC contractor or end user/owner organization, covering large-scale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) construction projects and strong background in quality management systems.</li> <li>Brownfield experience is a plus.</li> <li>Hands on working experience in major EPIC projects with involvement in all phases of EP-I-C from working level to independently managing / Heading QA/QC function, with technical expertise in a core discipline.</li> <li>Working knowledge of using and interpreting Shell DEPs, International Codes / Standards (IEC, NEC, ASME, ASTM, NACE, AWS, API, BS, ISO and Local Regulations) related to the job and industry.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Project Engineer to support engineering, design, construction, and startup activities across capital projects within the Oil &amp; Gas/Petrochemical industry, ensuring safe, efficient, and successful project execution. This is a full-time position based in Qatar.</p><br><p><strong>QUALIFICATIONS &amp; EXPERIENCE</strong></p><ul><li><p>Bachelor's degree in Chemical, Electrical, Mechanical, or Civil Engineering (Master's degree is an advantage)</p></li><li><p>5–7 years of project engineering experience within the Oil &amp; Gas industry</p></li><li><p>Experience supporting FEED, Detailed Design, Construction, and Startup phases of capital projects</p></li><li><p>Familiarity with process engineering, plant design, and project execution methodologies</p></li><li><p>Exposure to petrochemical projects is highly preferred</p></li><li><p>Proficient in English; working knowledge of Arabic is an advantage</p><br></li></ul><p><strong> SKILLS &amp; COMPETENCIES</strong></p><ul><li><p>Expertise in reviewing process engineering deliverables, including PFDs, P&amp;IDs, plot plans, and process design documentation</p></li><li><p>Experience participating in HAZOP, MOC, PSSR, and process safety evaluations</p></li><li><p>Capable of supporting process control systems, interlocks, shutdown logic, and DCS design reviews</p></li><li><p>Adept at coordinating multidisciplinary engineering teams, contractors, and technical consultants</p></li><li><p>Knowledge of OSHA, NFPA, and industrial safety standards throughout project execution</p></li><li><p>Effective planning, technical problem-solving, and project coordination capabilities</p></li><li><p>Ability to prepare engineering reports, technical documentation, and project recommendations accurately</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>.</p><p></p></section>

<p>To provide professional technical guidance, with full responsibility and accountability, to ensure that the Quality Management System is well implemented within the offshore EPIC Projects.</p><p>To ensure and monitor full compliance with Standards, Shell Dep's, and applicable International Codes throughout the projects performed, which shall be addressed in the relevant Project Quality Plans (PQP).</p><p>Prepare the Project QMS documentation in accordance with requirements.</p><p>Manage and follow-up on implementation of QMS compliance requirements in Contracts.</p><p>Act as a PMT Focal Point for Corporate/external audits. Coordinate with Project Team and EBS for planning and conducting second party audits on Contractors and participate in assigned audits during contracts execution.</p><p>Guide subordinates (call-off) and Project Team on various activities related to latest version of ISO 9001 Standard, QMS system documentation and certification requirements.</p><p>Prepare Project Quality Plan (PQP) in coordination with the Project Team.</p><p>Ensure that EPIC Contractors required Project Quality Plan (PQP) is established and adhered to throughout the Project Life Cycle.</p><p>Review the EPIC Scope of Services (SOS) and Scope of Work (SOW) and ensure that quality and technical requirements are incorporated which include Contractor/Supplier's QA/QC and relevant engineering and construction deliverables and any other Technical / System documents.</p><p>Participate in pre-qualification of EPIC Contractors/Sub-Contractors and Vendors, as required, monitor and enforce compliance with ISO 9001, QP-QAL-STD-004, PML/SML, etc.</p><p>Participate in EPIC technical bid evaluation of the Bidders to ensure that quality requirements as per QP-QAL-STD-004 are included, addressed, and understood.</p><p>Review Contractor/Supplier's engineering and construction deliverables with specific emphasis to QA/QC and coordinate with relevant engineering discipline specialists on issues related to materials/corrosion/special processes etc.; to enforce compliance to contract requirements.</p><p>Ensure deviation &amp; non-conformance control system is implemented to meet the departmental compliance requirements.</p><p>Verify the resolution of deviations related to corrective and preventive actions and proper closure of NCRs and CARs.</p><p>Lead multi-discipline QA/QC Team (call-off) within the Project Teams and ensure that the Inspection Test Plans and procedures are in place and adhered to throughout the project life cycle.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in an Engineering discipline from an internationally recognized University, preferably a Mechanical degree. Master's degree is also preferable.</li><li>Membership of a recognized Professional Institution of Relevance is preferable.</li><li>Minimum fifteen (15) years of relevant QA/QC experience in Oil &amp; Gas projects, including solid offshore experience, minimum 5 years in similar senior positions.</li><li>Qualified as Lead ISO 9001 Auditor. Professional qualifications relevant to quality are desirable. Working knowledge and experience with international codes and standards relevant to quality.</li><li>Familiar with development of quality management systems, quality assurance &amp; control relevant to Oil and Gas or Infrastructure and Civil projects during engineering development, procurement, construction &amp; commissioning.</li><li>Working knowledge in the manufacturing inspection and certification processes for equipment/ materials in projects and the associated Quality Assurance and Quality Control practices.</li><li>Working knowledge in offshore construction, welding &amp; NDE (conventional and nonconventional techniques) is essential.</li><li>Proficient in the English language (both written &amp; spoken).</li><li>Leadership skills to motivate and organize Project and Contractors quality &amp; Inspection Teams to achieve a high-performance level.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking a detail-oriented and innovative Senior Engineer - Drainage to join our team in Doha, Qatar. You will be responsible for executing complex drainage system designs. This position offers the opportunity to work on meaningful infrastructure projects while contributing to the growth and success of our organization.</p><br><ul><li>Design, develop, and independently complete primary drainage system elements for engineering works, ensuring compliance with Qatar building codes and MME standards</li><li>Gather, analyze, and correlate engineering data using established procedures and industry best practices to support project development</li><li>Perform detailed hydraulic calculations, modeling, and testing to validate drainage system performance and efficiency</li><li>Identify discrepancies in engineering results and propose analytical solutions using both standard procedures and innovative modifications</li><li>Manage project timelines and budgets with minimal supervision, demonstrating efficient organization and decisive decision-making</li><li>Mentor and provide technical guidance to entry-level engineers, fostering a collaborative and supportive work environment</li><li>Conduct site assessments and surveys to evaluate drainage requirements and develop comprehensive solutions</li><li>Prepare technical documentation, design drawings, and reports using CAD software and industry-standard tools</li><li>Collaborate with cross-functional teams including architects, contractors, and stakeholders to ensure project success</li><li>Stay current with evolving drainage technologies and best practices to drive continuous improvement</li></ul><br>Qualifications<br><ul><li><strong>Valid MME (Ministry of Municipality and Environment) professional engineering registration/license</strong></li><li><strong>Qatar experience&nbsp;</strong></li><li><strong>Fluent in Arabic and English</strong></li><li>Bachelor's degree in Civil Engineering, Environmental Engineering, or related discipline</li><li>Minimum 12+ years of professional experience in drainage engineering or related infrastructure projects</li><li>Proven expertise in drainage system design, hydraulic modeling, and analysis</li><li>Proficiency with CAD software and engineering design tools</li><li>Strong knowledge of Qatar building codes, regulations, and local environmental standards</li><li>Demonstrated experience managing engineering projects within budget and schedule constraints</li><li>Excellent analytical and problem-solving skills with attention to detail</li><li>Experience mentoring and supervising junior engineering staff</li><li>Strong written and verbal communication skills in English</li><li>Project management capabilities and ability to work independently with minimal supervision</li><li>Familiarity with site assessment methodologies and survey procedures</li><li>Professional commitment to quality, transparency, and ethical engineering practices</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p><strong>What You ll Be Doing</strong></p><ul><li>Independently carry out design of stormwater drainage systems for various projects.</li><li>Manage design of non-conventional/smart drainage systems and Sustainable Urban Drainage systems.</li><li>Investigating and developing stormwater drainage designs with minimum supervision, based on principles of urban drainage design, SuDS, and Water sensitive design.</li><li>Hydraulic and System design of the complex environment to meet site-specific requirements.</li><li>Understanding the biological and physical process of stormwater management.</li><li>Applying innovative ideas, technology, and value engineering solutions.</li><li>Supervision and support to junior engineers.</li><li>Undertake hydrologic modeling, calculations, drawings, and report writing.</li><li>Work across all stages of a project, taking a high level of responsibility but under the coaching and support of our senior engineers.</li><li>Coordinating with the CAD / BIM / 3-D modeling teams on projects.</li><li>Performs other responsibilities associated with this position as may be appropriate.</li></ul><p><strong>What Required Skills You ll Bring</strong></p><ul><li>Degree in Civil/Environmental/Hydrology and or Water Engineering from a reputable university</li><li>Minimum 5+ years experience related to infrastructure and civil engineering projects, water engineering, including stormwater drainage design, catchment analysis, stormwater management, and planning.</li><li>Sound knowledge of principles of hydrology and hydraulics.</li><li>Experience of designing culverts, urban drainage systems and highway drainage is required.</li><li>Demonstrated understanding of hydrologic and hydraulic modeling/design software packages used in the design of surface drainage, piped networks, cross drainage, and flood analysis, i.e., CAD skills, SWMM, HEC RAS, and HEC-HMS knowledge.</li><li>Excellent command with GIS and CAD tools such as ArcMap, AutoCAD, Civil 3D, and Microstation.</li><li>The capability of mathematics to create calculation sheets and perform further calculations where required to ensure the design is appropriate.</li><li>Knowledge of Water Sensitive Design and Sustainable Drainage Design (SuDS).</li></ul><p><strong>What Desired Skills You'll Bring</strong></p><ul><li>Master's Degree in Water Engineering/Hydrology would be an advantage.</li><li>Chartered Engineer (CEng) qualified (or equivalent) or well-progressed towards qualification.</li><li>Candidates working towards professional qualifications (PE, ICE, CIWEM, etc.) will be preferred.</li><li>Experience with Infoworks ICM would be an added advantage.</li><li>Strong verbal and written communication skills.</li><li>Excellent organizational skills.</li><li>A collegiate, team-player attitude</li><li>Prior experience in GCC market/projects.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Degree in Civil/Environmental/Hydrology and or Water Engineering from a reputable university Minimum 5+ years experience related to infrastructure and civil engineering projects, water engineering, including stormwater drainage design, catchment analysis, stormwater management, and planning. Sound knowledge of principles of hydrology and hydraulics. Experience of designing culverts, urban drainage systems and highway drainage is required. Demonstrated understanding of hydrologic and hydraulic modeling/design software packages used in the design of surface drainage, piped networks, cross drainage, and flood analysis, i.e., CAD skills, SWMM, HEC RAS, and HEC-HMS knowledge. Excellent command with GIS and CAD tools such as ArcMap, AutoCAD, Civil 3D, and Microstation. The capability of mathematics to create calculation sheets and perform further calculations where required to ensure the design is appropriate. Knowledge of Water Sensitive Design and Sustainable Drainage Design (SuDS).</p><p>Master's Degree in Water Engineering/Hydrology would be an advantage. Chartered Engineer (CEng) qualified (or equivalent) or well-progressed towards qualification. Candidates working towards professional qualifications (PE, ICE, CIWEM, etc.) will be preferred. Experience with Infoworks ICM would be an added advantage. Strong verbal and written communication skills. Excellent organizational skills. A collegiate, team-player attitude Prior experience in GCC market/projects.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>An established engineering consultancy in Qatar is seeking an experienced Senior Electrical Engineer BIM to support the delivery of high-profile building and infrastructure projects. This is an initial 2-month contract with strong potential for extension , making it ideal for professionals who are immediately available or can mobilise at short notice. The successful candidate will be responsible for producing high-quality electrical designs, developing BIM models, coordinating with multidisciplinary teams, and ensuring all engineering deliverables meet project specifications, international standards, and client requirements.</p><p>Key Responsibilities</p><ul><li>Design and develop LV/MV electrical power distribution systems for commercial, residential, healthcare, hospitality, and mixed-use developments.</li><li>Prepare electrical calculations including load calculations, cable sizing, voltage drop, short-circuit analysis, protection coordination, and fault level calculations.</li><li>Produce single-line diagrams, power layouts, lighting layouts, containment drawings, panel schedules, and detailed engineering documentation.</li><li>Design indoor, outdoor, and emergency lighting systems using Dialux or Relux.</li><li>Design fire alarm, emergency communication, public address, voice evacuation, and life safety systems in accordance with international standards.</li><li>Develop designs for ELV systems including CCTV, access control, structured cabling, BMS, IPTV, nurse call, and building automation systems.</li><li>Perform generator sizing, UPS calculations, power factor correction, harmonic analysis, and energy efficiency studies.</li><li>Develop accurate 3D electrical BIM models using Autodesk Revit MEP.</li><li>Participate in BIM coordination meetings and resolve multidisciplinary clashes using Navisworks.</li><li>Create, modify, and maintain Revit families for electrical equipment, lighting fixtures, panels, and containment systems.</li><li>Coordinate closely with architectural, structural, mechanical, and public health engineering teams throughout all project stages.</li><li>Prepare design documentation suitable for concept, detailed design, tender, and construction phases.</li><li>Ensure compliance with project BIM Execution Plans (BEP), Common Data Environment (CDE) procedures, and international engineering standards.</li><li>Support project managers and lead engineers in delivering projects on schedule while maintaining high-quality technical standards.</li></ul><p>Required Skills &amp; Technical Expertise</p><ul><li>Electrical Engineering</li><ul><li>LV &amp; MV power distribution</li><li>Load calculations and cable sizing</li><li>Protection coordination</li><li>Short-circuit analysis</li><li>Lighting and emergency lighting design</li><li>Fire alarm and life safety systems</li><li>ELV and ICT systems</li><li>Generator and UPS sizing</li><li>Power quality and energy efficiency studies</li></ul><li>BIM &amp; Design Coordination</li><ul><li>Autodesk Revit MEP</li><li>Navisworks</li><li>Manage Clash detection and multidisciplinary coordination</li><li>BIM Execution Plans (BEP)</li><li>ISO 19650 and BIM workflows</li><li>LOD modelling</li><li>Common Data Environment (ACC/BIM 360 or equivalent)</li><li>Revit family creation and model management</li></ul><li>Software</li><ul><li>Autodesk Revit MEP</li><li>Navisworks</li><li>AutoCAD</li><li>Dialux / Relux</li><li>ETAP or SKM</li><li>Bluebeam Revu</li><li>Microsoft Office Suite</li></ul></ul><p>Qualifications &amp; Experience</p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 8 10 years of electrical engineering design experience within building services or MEP consultancy environments.</li><li>At least 3 5 years of hands-on BIM/Revit MEP experience.</li><li>Demonstrated experience delivering multidisciplinary building or infrastructure projects.</li><li>Strong understanding of IEC, NFPA, BS, and other relevant international electrical standards.</li><li>Experience working within BIM environments and coordinating across multiple engineering disciplines.</li><li>Previous experience on GCC projects is highly desirable.</li><li>Chartered Engineer status or Autodesk Revit Professional Certification is advantageous.</li></ul><p>What We Offer</p><ul><li>Initial 2-month contract with the possibility of extension .</li><li>Opportunity to work on prestigious engineering and infrastructure projects.</li><li>Collaborative and technically driven project environment.</li><li>Competitive contract package based on qualifications and experience.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">We are looking for a proactive and technically strong professional who can work independently while collaborating effectively within multidisciplinary project teams. The ideal candidate will possess excellent communication skills, strong attention to detail, and the ability to manage multiple design deliverables within fast-paced project environments. Candidates who are currently based in Qatar or the GCC , or who are available to mobilise immediately , will be highly regarded.</p></section>

<p>Civil Engineer – Doha CLIENT Linum Consult’s client is a major international company working within the energy sector. They are currently seeking a Civil Engineer to be based in their Doha office. RESPONSIBILITIES • Overseeing construction projects, ensuring they are completed on time, within budget, and to the highest quality standards • Developing detailed project plans, including scope, schedule and budget • Reviewing engineering designs, drawings, and specifications using CAD software • Conducting site investigations and risk assessments • Ensuring designs comply with building codes, regulations, and local and international industry standards • Ensuring executed work complies with approved designs, local, national, and international building codes and regulations • Monitoring project progress, identifying potential delays, and implementing corrective actions</p><p>PROFILE • Degree qualification in Civil Engineering • At least 12 years’ experience in a Civil Engineer role within the heavy industry construction sector • Good understanding of the power and/or energy sectors, with a history of executing the civil engineering works on power plant construction projects • Fluent in spoken and written English • Currently working in Doha, with a good understanding of Qatar and GCC culture & working environment</p>