وظائف فني صيانة في قطر

<p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position:</p><p>Mechanical Technician (Rotating) - (2)</p><p>Date Open:</p><p>Feb 19, 2026</p><p>Closing Date:</p><p>May 31, 2026</p><p>Principal:</p><p>Qatar District Cooling Company</p><p>Country:</p><p>Doha, Qatar</p><p>Qualifications:</p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>· Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.&nbsp; &nbsp; &nbsp; Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2.&nbsp; &nbsp; &nbsp; Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.&nbsp; &nbsp; &nbsp; Air Compressor</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4.&nbsp; &nbsp; &nbsp; AHU fans and blower</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;5.&nbsp; &nbsp; &nbsp; Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;6.&nbsp; &nbsp; &nbsp; Mechanical forklift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;7.&nbsp; &nbsp; &nbsp; Mechanical manlift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;8.&nbsp; &nbsp; &nbsp; Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p><br></p><p>· Supervise, guide, and monitor work done by external vendors.</p><p>· Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>· Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>· Utilize, maintain and safe keep specific tools assigned by company.</p><p>· Maintain proper tools, PPE’s, Spares and provide annual requirements.</p><p>· Respond to emergency situations during or after hours as part of business continuity.</p><p>· Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>· Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>· Participate in QC provided training as deemed fit by management.</p><p>· Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</li><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li><li>Supervise, guide, and monitor work done by external vendors.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours as part of business continuity.</li><li>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</li><li>Where applicable, aid and support to other team members within and across the discipline, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Min. 2 years experience in a similar role in a five-star Hotel brand</li><li>Strong troubleshooting skills and knowledge of safety procedures.</li><li>Able to communicate in English</li><li>Ability to work well under pressure in a fast-paced environment</li></ul><p></p></section>

<p>Principal: Qatar District Cooling Company</p><p>Country: Doha, Qatar</p><p>Qualifications: Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</li><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li><li>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</li><li>Supervise, guide and monitor work done by external vendors.</li><li>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</li><li>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</li><li>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</li><li>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</li><li>Work effectively with other team members, including engineers, supervisors, and external vendors.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li><li>Where applicable, provide assistance and support to other team members, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li><li>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position:</p><p>Mechanical Technician (Static) - (2)</p><p>Date Open:</p><p>Feb 19, 2026</p><p>Closing Date:</p><p>May 31, 2026</p><p>Principal:</p><p>Qatar District Cooling Company</p><p>Country:</p><p>Doha, Qatar</p><p>Qualifications:</p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>· Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;1.&nbsp; &nbsp; &nbsp; Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;2.&nbsp; &nbsp; &nbsp; Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.&nbsp; &nbsp; &nbsp; Tank (Structures, valves and fittings, air vents)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 4.&nbsp; &nbsp; &nbsp; Air handling Units (Filter, ducting, AHU Housing)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 5.&nbsp; &nbsp; &nbsp; Filtration system (Filters, housings, pipe and fittings)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 6.&nbsp; &nbsp; &nbsp; Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 7.&nbsp; &nbsp; &nbsp; Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p><br></p><p>&nbsp;Supervise, guide and monitor work done by external vendors.</p><p>· Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>· Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>· Utilize, maintain and safe keep specific tools assigned by company.</p><p>· Maintain proper tools, PPE’s, Spares and provide annual requirements.</p><p>· Respond to emergency situations during or after hours as part of business continuity.</p><p>· Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>· Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>· Participate in QC provided training as deemed fit by management.</p><p>· Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Perform preventive, predictive, and corrective maintenance on electrical equipment and systems.</p><p>• Troubleshoot and repair:</p><p>o Motors and pumps</p><p>o Motor Control Centers (MCCs)</p><p>o Variable Frequency Drives (VFDs)</p><p>o Switchgear and transformers</p><p>o Power distribution systems (LV/MV)</p><p>o PLC and SCADA-related electrical components</p><p>• Inspect, test, and maintain electrical panels, breakers, relays, and control circuits.</p><p>• Assist in plant start-up, shutdown, and commissioning activities.</p><p>• Monitor plant electrical performance and identify potential failures.</p><p>• Read and interpret electrical drawings, single-line diagrams, and wiring schematics.</p><p>• Ensure compliance with safety procedures, lockout/tagout (LOTO), and permit-to-work systems.</p><p>• Coordinate with operations, mechanical, and instrumentation teams to minimize downtime.</p><p>• Maintain maintenance records, reports, and spare-parts inventory.</p><p>• Support emergency breakdown maintenance on a shift basis.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma / ITI / Technical Certificate in Electrical Engineering or Electrical Technology.</p><p>• 3–5 years (or as specified) of industrial electrical maintenance experience.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><p>• Knowledge of:</p><p>o PLC systems</p><p>o SCADA systems</p><p>o VFDs</p><p>o MCCs</p><p>o LV/MV electrical systems</p><p>o Electrical safety standards and procedures.</p><p><br></p><p>Typical Equipment Maintained</p><p>• High-pressure RO pumps</p><p>• Feed water pumps</p><p>• MCC panels</p><p>• Transformers</p><p>• Generators and UPS systems</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Min. 2 years experience in a similar role in a five-star Hotel brand Strong troubleshooting skills and knowledge of safety procedures. Able to communicate in English Ability to work well under pressure in a fast-paced environment</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</p><p>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</p><p>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</p><p>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</p><p>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</p><p>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</p><p>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</p><p>Generate technical layouts and technical reports.</p><p>Understand and implement the basis of the Computer Maintenance Management Systems</p><p>Perform thermo graphic and analysis for the electrical equipment.</p><p>Provide assistance and guidance to other technical teams, whenever required</p><p>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Install, inspect, test, troubleshoot, repair, and maintain fire alarm systems. Ensure compliance with safety standards, perform preventive maintenance, and respond to system faults while maintaining accurate service records.</p><br><p><strong>Requirements:</strong></p><ul><li><p>Experience in fire alarm system installation and maintenance.</p></li><li><p>Basic knowledge of fire safety standards and electrical systems.</p></li><li><p>Ability to read technical drawings and troubleshoot faults.</p></li><li><p>Good communication skills and willingness to work on-site.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>.</p><p></p></section>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment: 1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints) 2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints) 3. Air Compressor 4. AHU fans and blower 5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels 6. Mechanical forklift 7. Mechanical manlift 8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers) Supervise, guide, and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li></ul><p></p></section>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled HVAC Technician to join our dynamic team in Qatar. This role is pivotal in ensuring the optimal performance of heating, ventilation, and air conditioning systems within our facilities. As an HVAC Technician, you will be responsible for installing, maintaining, and repairing HVAC systems, providing you with the opportunity to enhance your technical skills while contributing to a collaborative work environment. Our company values innovation and excellence, making it an exciting time to join our team.</p><p>In this position, you will not only apply your technical expertise but also engage in continuous learning and professional development. We prioritize the growth of our employees, offering training programs that keep you updated on the latest HVAC technologies and practices. This commitment to your career progression ensures that you will have the opportunity to advance within our organization, taking on more complex projects and leadership roles as you gain experience.</p><p>Our team culture fosters collaboration and support, where every member's contribution is valued. You will work alongside experienced professionals who are eager to share their knowledge and insights, creating an environment where you can thrive. If you're passionate about HVAC systems and looking for a role that offers both personal and professional growth, we invite you to apply and become a part of our innovative team.</p><p><b>Responsibilities:</b></p><ol><li>Install and configure HVAC systems according to specifications and safety standards, ensuring optimal performance and energy efficiency for residential and commercial clients.</li><li>Conduct routine maintenance checks and troubleshooting on HVAC systems, utilizing diagnostic tools to identify issues and implement solutions promptly.</li><li>Repair and replace faulty components in HVAC systems, ensuring minimal downtime and restoring comfort for clients in a timely manner.</li><li>Maintain accurate records of service calls, repairs, and maintenance activities, contributing to the overall efficiency of the service department.</li><li>Collaborate with team members to develop effective strategies for system upgrades and improvements, enhancing the overall service delivery.</li><li>Provide exceptional customer service by communicating effectively with clients regarding system performance, maintenance needs, and energy-saving tips.</li><li>Stay updated on industry trends and advancements in HVAC technology, participating in training sessions to enhance technical skills and service offerings.</li><li>Adhere to all safety regulations and guidelines while working in various environments, ensuring the well-being of yourself and others.</li><li>Assist in the training and mentoring of junior technicians, sharing knowledge and best practices to foster a culture of continuous learning.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in HVAC system installation and maintenance, ensuring systems operate efficiently and effectively.</li><li>Strong troubleshooting skills, enabling quick identification and resolution of HVAC system issues.</li><li>Excellent customer service skills, fostering positive relationships with clients and ensuring their satisfaction.</li><li>Knowledge of safety protocols and regulations, ensuring compliance during HVAC operations.</li><li>Ability to work collaboratively within a team, contributing to a supportive and productive work environment.</li><li>Strong communication skills, effectively conveying technical information to clients and team members.</li><li>Commitment to ongoing professional development, staying current with industry advancements and technologies.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><ul><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled HVAC Technician to join our dynamic team in Qatar. This role is pivotal in ensuring the optimal performance of heating, ventilation, and air conditioning systems within our facilities. As an HVAC Technician, you will be responsible for installing, maintaining, and repairing HVAC systems, providing you with the opportunity to enhance your technical skills while contributing to a collaborative work environment. Our company values innovation and excellence, making it an exciting time to join our team.</p><p>In this position, you will not only apply your technical expertise but also engage in continuous learning and professional development. We prioritize the growth of our employees, offering training programs that keep you updated on the latest HVAC technologies and practices. This commitment to your career progression ensures that you will have the opportunity to advance within our organization, taking on more complex projects and leadership roles as you gain experience.</p><p>Our team culture fosters collaboration and support, where every member's contribution is valued. You will work alongside experienced professionals who are eager to share their knowledge and insights, creating an environment where you can thrive. If you're passionate about HVAC systems and looking for a role that offers both personal and professional growth, we invite you to apply and become a part of our innovative team.</p><p><b>Responsibilities:</b></p><ol><li>Install and configure HVAC systems according to specifications and safety standards, ensuring optimal performance and energy efficiency for residential and commercial clients.</li><li>Conduct routine maintenance checks and troubleshooting on HVAC systems, utilizing diagnostic tools to identify issues and implement solutions promptly.</li><li>Repair and replace faulty components in HVAC systems, ensuring minimal downtime and restoring comfort for clients in a timely manner.</li><li>Maintain accurate records of service calls, repairs, and maintenance activities, contributing to the overall efficiency of the service department.</li><li>Collaborate with team members to develop effective strategies for system upgrades and improvements, enhancing the overall service delivery.</li><li>Provide exceptional customer service by communicating effectively with clients regarding system performance, maintenance needs, and energy-saving tips.</li><li>Stay updated on industry trends and advancements in HVAC technology, participating in training sessions to enhance technical skills and service offerings.</li><li>Adhere to all safety regulations and guidelines while working in various environments, ensuring the well-being of yourself and others.</li><li>Assist in the training and mentoring of junior technicians, sharing knowledge and best practices to foster a culture of continuous learning.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in HVAC system installation and maintenance, ensuring systems operate efficiently and effectively.</li><li>Strong troubleshooting skills, enabling quick identification and resolution of HVAC system issues.</li><li>Excellent customer service skills, fostering positive relationships with clients and ensuring their satisfaction.</li><li>Knowledge of safety protocols and regulations, ensuring compliance during HVAC operations.</li><li>Ability to work collaboratively within a team, contributing to a supportive and productive work environment.</li><li>Strong communication skills, effectively conveying technical information to clients and team members.</li><li>Commitment to ongoing professional development, staying current with industry advancements and technologies.</li></ul></div>