وظائف فني زجاج في قطر

Company Description The Wellbeing Hub is a premium wellness consultancy and in-home personal training company based in Qatar, specializing in high-end residential fitness solutions. The team transforms home and tower gyms into state-of-the-art wellness spaces through bespoke gym design and carefully curated equipment sourcing. Services are tailored for real estate developers and individuals seeking convenience, exclusivity, and holistic health solutions in their own homes. The Wellbeing Hub also provides personalized training and recovery programs that integrate seamlessly into clients’ lifestyles. Applicants join a growing organization focused on elevating home-based wellness experiences in the region.<br>Job purpose Keep commercial gym equipment safe, reliable, and available. The technician inspects, maintains, diagnoses, repairs, installs, and documents cardio, strength, and functional training equipment across assigned clubs or client sites so members can train without downtime or safety risk.<br>Key responsibilities Preventive maintenance• Inspect cardio, strength, functional, and specialty equipment on a planned schedule.• Lubricate, adjust, clean, tension belts/cables, and calibrate machines to manufacturer specifications.• Keep a site-by-site PM calendar and complete checklists after every visit. Repair and diagnostics• Troubleshoot mechanical, electrical, and electronic faults (motors, drive boards, consoles, sensors, cables, pulleys, bearings, resistance systems).• Replace belts, decks, rollers, motors, consoles, cables, pins, upholstery, and other wear parts.• Decide when a machine should be locked out, repaired on site, sent for workshop repair, or recommended for replacement. Installation and moves• Uncrate, assemble, level, and commission new equipment.• Relocate or reconfigure machines during fit-outs, renovations, or club refreshes.• Test units after install and brief club staff on basic care and fault reporting. Safety and compliance• Isolate unsafe equipment immediately and tag it out of service.• Follow electrical safety, lockout/tagout, and manufacturer procedures.• Report hazards, near misses, and repeat failures to the line manager. Parts, inventory, and vendors• Maintain a practical stock of high-turnover parts and consumables.• Identify part numbers, raise purchase requests, and chase deliveries.• Coordinate warranty work and specialist support with OEMs and local suppliers. Documentation and communication• Log every inspection, repair, and parts use in the work-order / CMMS system (or paper log if no system is in place).• Update club managers on downtime, expected return-to-service, and parts lead times.• Train reception and floor staff on simple daily checks (unusual noise, error codes, loose cables). Other duties• Keep tools, the workshop, and any company vehicle clean, stocked, and roadworthy.• Support basic related tasks when needed (drink coolers, simple facility faults) if assigned.• Work occasional evenings, Fridays, or emergency call-outs to restore critical machines. <br><br>Typical equipment• Cardio: treadmills, ellipticals / cross-trainers, bikes, steppers, rowers, climbers• Strength: selectorized, plate-loaded, cable motion, functional trainers, Smith machines• Other: racks, benches, free-weight hardware, consoles and entertainment systems• Common brands in Qatar clubs and hotels: Technogym, Life Fitness, Matrix, Precor, Hammer Strength, Cybex, and similar commercial lines

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p><span><b>Job Description</b></span></p><br><br><br><br><p><b>IBDP/HSD Design Technology Technician </b></p><br><br><p><b>Job Description</b></p><br><br><p><b>Type: </b>Permanent</p><br><br><p><b>Department:</b> Academic</p><br><br><p><b>Line Manager:</b> Head of Secondary</p><br><br><p><b>Functional Reporting</b>: N/A</p><br><br><p>______________________________________________________________________________</p><br><br><p><b>Key Duties and Areas of Responsibility</b></p><br><br><ul><li>Prepares resources, tools, and equipment for Design &amp; Technology lessons, including hard materials (woods, metals, plastics), art processes, and electronic components.</li><li>Sets up, operates, and maintains workshop machinery (e.g., saws, drills, sanders) and new technologies (e.g., laser cutters, 3D printers, CNC machines).</li><li>Conducts regular checks and routine maintenance of all DT equipment and machinery, reporting any faults or safety concerns to the Head of Department.</li><li>Orders, inventories, and manages stock levels of materials, tools, and consumables, ensuring supplies are available for planned lessons and projects.</li><li>Assists teaching staff during practical sessions as required, providing technical support to students and helping to demonstrate safe and correct use of tools and equipment.</li><li>Maintains a clean, organised, and hazard-free workshop environment, including the safe storage of tools, sharp objects, and hazardous materials.</li><li>Supports the preparation of displays, models, and exemplar work to aid teaching and learning.</li><li>Provides basic IT support for DT-specific software (e.g., CAD/CAM programs, 3D printing slicers) and assists students and staff with file preparation for laser cutting and 3D printing.</li><li>Keeps accurate records of equipment usage, maintenance logs, and safety inspections.</li></ul><br><p><b>Other duties and responsibilities</b></p><br><br><p>Any other duties that the Principal may from time to time ask the post-holder to perform</p><br><br><br><p><b>Position Requirements</b></p><br><br><p><b>Education:</b></p><br><br><ul><li>High school diploma or equivelant.</li><li>Minimum&nbsp;<b>3 years of similar experience.</b></li><li>Understanding modern DT, including product design, digital tools, materials, and design processes.</li><li>Excellent communication, organization, and classroom management skills.</li><li>A reflective, collaborative, and innovative educator committed to continuous improvement.</li></ul><p><b>Language</b>: English is mandatory</p><br><br><br><p><b>Required Skills and Knowledge </b></p><br><br><p><b>Knowledge</b></p><br><br><p><b>Competencies</b></p><br><br><ul><li>In-depth knowledge and understanding of School and associated assessment methods</li><li>Up to date curriculum developments</li><li>Application of effective teaching and learning theory and practice of providing effectively for the individual needs of all children (e.g. classroom organisation and learning strategies)</li><li>Proven management skills</li><li>Excellent communication skills and command of the English language, in spoken and written form</li><li>Presentation skills with the ability to present information in a concise and professional manner to a variety of audiences</li><li>Organization skills: well organized and able to prioritize, multi tasks and meet deadlines</li><li>The ability to work on a regular and punctual basis</li><li>Flexible and work well under pressure</li><li>Customer service</li><li>Critical thinking</li><li>Ability to negotiate, persuade and motivate others</li><li>Willing attitude to be a part of the school team</li><li>Strong sense of professionalism</li><li>Safeguarding and welfare of children</li><li>A collaborative team-player with excellent interpersonal skills whilst recognizing and transcending cultural differences</li><li>The ability to develop good personal relationships within a team</li><li>Behaviour management</li><li>Demonstrated competency to use computer applications related to the role, including word processing and spreadsheet applications</li><li>Accurate data collection ability</li><li>Record keeping and report preparation methods</li><li>Interpersonal skills including tact, courtesy and patience</li><li>Customer focused</li><li>Willingness to undertake appropriate Professional Development</li></ul><p><b>Attributes</b></p><br><br><ul><li>Empathetic listener</li><li>Integrity and confidentiality</li><li>Internationally minded</li><li>Emotional intelligence</li><li>Intercultural awareness, creative</li><li>Flexible and a can-do attitude</li><li>Passionate about delivering quality education</li><li>Able to command respect of pupils, colleagues and parents</li><li>Driven by wanting to improve quality and develop the school</li><li>Reliable with an attention to detail and a commitment to quality</li><li>An innovator with a willingness to embrace change</li></ul><br><p><span><b>ISP Principles</b></span></p><br><br><p><b>Begin with our children and students</b>. Our children and students are at the heart of what we do. Simply, their success is our success. Wellbeing and safety are both essential for learners and learning. Therefore, we are consistent in identifying potential safeguarding</p><br><br><p>and Health &amp; Safety issues and acting and following up on all concerns appropriately.</p><br><br><p><b>Treat everyone with care and respect</b>. We look after one another, embrace similarities and differences and promote the well-being of self and others.</p><br><br><p><b>Operate effectively.</b> We focus relentlessly on the things that are most important and will make the most difference. We apply school policies and procedures and embody the shared ideas of our community.</p><br><br><p><b>Are financially responsible.</b> We make financial choices carefully based on the needs of the children, students and our schools.</p><br><br><p><b>Learn continuously.</b> Getting better is what drives us. We positively engage with personal and professional development and school improvement.</p><br><br><br><p><span><b>ISP Commitment to Safeguarding Principles</b></span></p><br><br><br><p>ISP is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. All post holders are subject to appropriate vetting procedures, including an online due diligence search, references and satisfactory Criminal Background Checks or equivalent covering the previous 10 years’ employment history.</p><br><br><br><p><span><b>ISP Commitment to Diversity, Equity, Inclusion, and Belonging</b></span></p><br><br><br><p>ISP is committed to strengthening our inclusive culture by identifying, hiring, developing, and retaining high-performing teammates regardless of gender, ethnicity, sexual orientation and gender expression, age, disability status, neurodivergence, socio-economic background or other demographic characteristics. Candidates who share our vision and principles and are interested in contributing to the success of ISP through this role are strongly encouraged to apply.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br><p>As a Microsoft Data Center Inventory &amp; Asset Technician (DIAT), you will perform cycle audits, execute incoming/outgoing deliveries, coordinate security escorts for third-party vendors, and document inbound and outbound deliveries. This opportunity will allow you to deepen your knowledge of inventory management principles, warranty process management, data bearing device destruction and advance your career in the process.</p><br><p>Microsoft’s Cloud Operations &amp; Innovation (CO+I) is the engine that powers our cloud services. As a CO+I DIAT, you will perform a key role in delivering the core infrastructure and foundational technologies for Microsoft's online services including Bing, Office 365, Xbox, OneDrive, and the Microsoft Azure platform. As a group, CO+I is focused on the personal and professional development of all employees and offers training and opportunities including Career Rotation Programs, Diversity &amp; Inclusion training and events, and professional certifications.</p><br><p>Our infrastructure is comprised of a large global portfolio of more than 200 Data Centers in 32 countries and millions of servers. Our foundation is built upon and managed by a team of subject matter experts working to support services for more than 1 billion customers and 20 million businesses in over 90 countries worldwide.</p><br><p>With environmental sustainability and optimization at the forefront of our data center design and operations, we continue to grow and evolve as we meet the ever-changing business demands that hold Microsoft as a world-class cloud provider.</p><br><p>Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond.</p><br><br><b>Responsibilities</b><br><p><strong>Responsibilities</strong></p><br><ul><li>Perform assigned tasks and escalate issues during high-volume work activity or escalation-based situations.</li><li>Coordinate with suppliers to initiate warranty claim and process failed vendor hardware devices.&nbsp; This includes information processing, packaging, shipment, and receipt of return for Return Merchandise Authorization (RMA) devices following all Service Level Agreements (SLAs) related to RMA warranty process.</li></ul><ul><li>Leverage process knowledge and best judgment to complete tasks with minimal direct supervision.</li></ul><ul><li>Maintains a strong focus to understand the impact of their work when completing tickets and assigned Inventory and Asset Management (IAM) tasks.</li></ul><ul><li>Maintains and steward up-to-date and accurate logical information within various inventory management systems (e.g., configuration management databases, asset management repositories).</li><li>Ensures detailed physical inventory tracking and staging.</li></ul><ul><li>Help to reconcile and report inventory discrepancies.</li></ul><ul><li>Performs destruction of data bearing devices (DBD) following all Service Level Agreements (SLAs) and Microsoft policies as necessary.</li></ul><ul><li>Notifies management about ordering stock shortages. Escalates any issues to management.</li></ul><ul><li>Comply with security and data management policies.</li><li>Embody our culture and values.</li></ul><br><b>Qualifications</b><br><p><strong><span>Required Qualifications</span></strong></p><br><ul><li>High School Diploma AND experience warehouse/supply chain in an information technology (IT) environment, inventory management, retail, warehouse management, or a related field.<ul><li>OR equivalent experience.</li></ul></li></ul><ul><li>Ability to work shifts, including shift assignments during non-standard business hours that may include evening, nighttime, weekends, and/or holidays</li></ul><p><strong>Background Check Requirements:&nbsp;</strong></p><br><p>Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings:&nbsp;</p><br><ul><li>Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.</li></ul><p>While not required, we also look for the following<strong> <em><span>Preferred</span></em><span> Qualifications</span>: </strong></p><br><ul><li>2+ year(s) experience in warehouse/supply chain in an information technology (IT) environment, IT, and/or logistics, operating heavy-load movement equipment (e.g., forklift, pallet jacks, chassis lifts) for a large corporation<ul><li>OR equivalent experience.</li></ul></li></ul> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We're looking for a detail-oriented and analytical BIM Technician specializing in Wet Utilities to join our team in Doha, Qatar. In this role, you will be responsible for creating, managing, and coordinating Building Information Models focused on wet utilities systems including water supply, drainage, and sewage infrastructure. You will work collaboratively with multidisciplinary teams to ensure accurate modeling, clash detection, and seamless project coordination on complex infrastructure projects in the region.</p><br><ul><li>Develop and maintain detailed 3D BIM models for wet utilities systems using industry-standard software such as Revit, Navisworks, or equivalent platforms</li><li>Coordinate MEP (Mechanical, Electrical, Plumbing) systems with architectural and structural models to identify and resolve clashes and conflicts</li><li>Perform clash detection analysis and generate comprehensive reports with recommended solutions</li><li>Prepare technical drawings, specifications, and documentation from BIM models for construction and coordination purposes</li><li>Collaborate with engineers, architects, contractors, and other stakeholders to ensure model accuracy and project alignment</li><li>Manage and organize BIM data, ensuring consistency, accuracy, and compliance with project standards and protocols</li><li>Analyze and interpret technical drawings and specifications to accurately represent wet utilities infrastructure in the model</li><li>Support project teams with BIM coordination meetings and provide technical guidance on modeling standards</li><li>Ensure compliance with local building codes, standards, and best practices relevant to Qatar and the GCC region</li><li>Maintain organized project files and documentation for efficient data retrieval and project continuity</li></ul><br>Qualifications<br><p>**Required Skills and Experience:**</p><br><ul><li>Proficiency in BIM software, particularly Revit, Navisworks, or similar modeling platforms</li><li>Demonstrated expertise in MEP (Mechanical, Electrical, Plumbing) systems and wet utilities infrastructure</li><li>Strong understanding of water supply, drainage, sewage, and related utility systems</li><li>Proven experience with 3D modeling, coordination, and clash detection</li><li>Ability to interpret and work from technical drawings and specifications</li><li>Proficiency in CAD software and technical documentation</li><li>Minimum 5 years of professional experience in BIM coordination, MEP modeling, or wet utilities projects</li><li>Experience working on infrastructure or construction projects with multidisciplinary teams</li><li>Strong organizational and data management skills with attention to detail</li></ul><p>**Preferred Skills and Experience:**</p><br><ul><li>Familiarity with local building codes, standards, and regulations in Qatar or the GCC region</li><li>Experience with project management software and collaboration tools</li><li>Knowledge of clash detection methodologies and resolution strategies</li><li>Excellent communication and interpersonal skills with the ability to work effectively in team environments</li><li>Experience coordinating with contractors, engineers, and other stakeholders on complex projects</li><li>Analytical mindset with the ability to problem-solve technical challenges efficiently</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels. Performs inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels. Performs inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

About Us<br><br>As the world’s largest family of luxury hotels, we all take great pride in being genuine ambassadors of the Inter Continental® brand. Shaped by decades of international know-how and local insights, our passion for luxury travel spans cultures and customs. Inspiring us to create warm and sophisticated experiences for those seeking a richer perspective on the world. Towering over the city center, our luxury Doha hotel is one of the tallest in Qatar.<br><br>You’ll find us in the exclusive West Bay area, close to the city’s Doha Exhibition and Convention Centre, government offices, and corporate headquarters. Our spacious rooms and suites have panoramic city and sea views, while award-winning restaurants, state-of-the-art meeting venues, easy access to local highlights, a health, and fitness club, and a rooftop pool, ensure a memorable stay<br><br>At Inter Continental Doha The City, we are looking for a passionate Kitchen & Laundry Technician.<br><br>A little taste of your day-to-day:<br><br>Every day is different, but you’ll mostly be:<br><br>Inspecting, maintaining, and repairing Kitchen & Laundry equipment to ensure smooth daily operations. Carrying out preventive maintenance on kitchen equipment, washing machines, dryers, and other laundry equipment. Responding promptly to maintenance requests and completing work orders to minimise equipment downtime. Keeping tools, equipment, and work areas clean, organised, and in good working condition. Supporting energy conservation initiatives by identifying maintenance improvements and efficient operating practices. Following all health, safety, and hotel engineering standards while carrying out repairs. Working closely with the Kitchen & Laundry teams to resolve technical issues and maintain uninterrupted operations. Taking on other maintenance duties as assigned while contributing as a reliable team player.<br><br>What We need from you:<br><br>A Vocational Certificate or Diploma in Engineering, Mechanical, Electrical, or a related field, with at least 2 years of relevant experience. Hands-on experience maintaining and repairing commercial laundry equipment. Knowledge of preventive maintenance practices and troubleshooting mechanical and electrical faults. The ability to lift, push, and pull items up to 50 lbs (23 kg), with frequent bending, walking, and standing throughout the shift. A good understanding of reading, writing, and basic maths. Flexibility to work shifts, including nights, weekends, and public holidays. A strong commitment to workplace health and safety standards. Great communication skills, a proactive attitude, and the ability to work effectively with colleagues across departments. Strong understanding of electrical and mechanical systems and basic plumbing Proficiency in operating and maintenance of commercial kitchen and laundry equipment Knowledge in Refrigeration system with basic welding and brazing. Knowledge on Occupational Safety Hazard regulation is a must<br><br>What We Offer<br><br>In return, we offer competitive pay and benefits, and a chance to work with a great team of talented people. Most importantly, we'll give you the room to be yourself. So what's your passion? Please get in touch if this position matches your skills and interests and tell us how you could bring your individual competencies by clicking “Apply Online”<br><br>Our mission is to welcome everyone and create inclusive teams where we celebrate difference and encourage colleagues to bring their whole selves to work. IHG Hotels & Resorts provides equal employment opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. We promote a culture of trust, support, and acceptance. Always welcoming different backgrounds, experiences, and perspectives.<br><br>IHG gives every member of the team the room they need to belong, grow and make a difference in a collaborative environment. We know that to work well, we need to feel well – both inside and outside of work – and through our my Wellbeing framework, we are committed to supporting wellbeing in your health, lifestyle, and workplace.<br><br>So, join us and you’ll become part of our ever-growing global family.<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>We are seeking a detail-oriented Civil Drafting Technician/Designer to support the planning, design, and delivery of airport infrastructure projects. The role involves the preparation, coordination, and management of civil engineering drawings and design documentation for a wide range of airside and landside airport developments, including runways, taxiways, aprons, roads, utility corridors, drainage systems, grading works, and associated infrastructure. The Civil Drafting Support will work closely with civil engineers, airport planners, airfield specialists, utility engineers, and multidisciplinary design teams to produce high-quality engineering drawings and models throughout all project phases, from concept development to detailed design and construction support. The individual will be responsible for ensuring that drawings are accurate, coordinated, compliant with project standards, and aligned with applicable aviation regulations, engineering standards, and client requirements.The role requires proficiency in CAD and BIM platforms, strong attention to detail, and the ability to manage drawing production in a complex, multidisciplinary airport environment. The candidate will contribute to the successful delivery of airport expansion, modernization, rehabilitation, and greenfield development projects by supporting efficient design coordination, documentation control, and project execution.</p><br>Your role<ul><li>Prepare and maintain civil engineering drawings and design documentation for airport infrastructure projects, including runways, taxiways, aprons, airside service roads, landside road networks, utility corridors, drainage systems, and associated facilities.</li><li>Produce drawings in accordance with project requirements, company standards, and applicable industry practices.</li><li>Support the development of airfield layout drawings, geometric plans, marking layouts, grading plans, and airside infrastructure drawings. Assist engineers in accurately translating design concepts into detailed technical drawings while ensuring compliance with applicable aviation and airport design standards.</li><li>Develop grading plans, contour drawings, earthworks layouts, stormwater drainage plans, profiles, cross-sections, and associated civil engineering documentation. Ensure consistency between grading, drainage, and pavement design requirements while maintaining accurate drawing coordination.</li><li>Prepare detailed drawings for underground and above-ground utility networks, including water supply, sewerage, stormwater, electrical duct banks, communications corridors, and fuel infrastructure. Coordinate utility layouts with other disciplines to avoid clashes and maintain constructability.</li><li>Support the preparation of civil drawings related to airfield and landside pavements, including pavement layouts, section details, construction details, pavement rehabilitation plans, and associated infrastructure works. Incorporate engineering input into accurate and constructible design documentation.</li><li>Develop, update, and maintain CAD drawings and BIM models in accordance with project execution plans and digital delivery standards. Support model coordination activities and ensure alignment between design models and drawing deliverables throughout the project lifecycle.</li><li>Work closely with civil engineers, airport planners, airfield specialists, structural, mechanical, electrical, ICT, and utility teams to coordinate design interfaces and ensure consistency across all project documentation. Resolve drawing conflicts and support integrated project delivery.</li><li>Conduct drawing reviews and self-checks to ensure accuracy, completeness, consistency, and compliance with project standards. Implement quality control procedures to minimize drafting errors and maintain high-quality deliverables.</li><li>Manage drawing updates and revisions throughout project development. Maintain document control procedures, drawing registers, and revision histories to ensure that project teams are working with the latest approved documentation.</li><li>Support the preparation of construction drawings, as-built records, and project documentation packages. Respond to drafting-related queries during project execution and assist engineers in resolving design and documentation issues arising during construction.</li><li>Incorporate survey data, GIS information, utility records, and existing airport infrastructure information into project drawings and models. Ensure that design documentation accurately reflects site conditions and project constraints.</li><li>Contribute to the continuous improvement of drafting practices, CAD standards, BIM workflows, and digital delivery processes. Support the adoption of innovative tools and technologies to enhance efficiency, consistency, and quality in airport project delivery.</li></ul>About you<ul><li>Bachelor’s degree in civil engineering. ITI / Diploma in Drafting trade or Civil Engineering.</li><li>5+ years of experience in drafting relevant deliverable. Experience in airport projects.</li><li>Strong hands-on experience with Autodesk AutoCAD and Civil 3D.</li><li>Good understanding of OpenRoads Designer, Infraworks, ArcGIS, QGIS is a plus.</li><li>Experience working with survey data formats, point clouds, LiDAR datasets, and GIS databases.</li><li>Familiarity with ICAO airport infrastructure requirements.</li><li>Utility coordination and underground services.</li><li>BIM workflows and data management.</li><li>Experience working on UK / Middle East / International aviation projects is preferred.</li><li>Ability to work independently and as part of a collaborative BIM team.</li><li>Knowledge of ACC / ProjectWise, Navisworks, and clash detection workflows.</li><li>Exposure to scripting or automation (Dynamo, Lisp, etc.) is a plus.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, familycare, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Craft Labor / RPSS<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<p>Overview</p><p>We are seeking a skilled Home Service Salon Nail Technician to join our dynamic beauty team in Doha, Qatar. The ideal candidate will provide high-quality nail care services to clients in a comfortable, in-home salon setting, ensuring safety, cleanliness, and exceptional customer satisfaction. This role offers the opportunity to work closely with clients, build a loyal clientele, and advance within a growing home-based beauty service provider.</p><p>About the Company</p><p>Our company specializes in delivering premium at-home beauty services, with a focus on nail care, manicure and pedicure treatments, and strategic client relationship management. We prioritize professionalism, hygiene, and guest experience, while maintaining flexible scheduling to accommodate clients in the Doha area.</p><p>Key Responsibilities and Duties</p><ul><li>Perform professional manicure and pedicure services, including shaping, cuticle care, exfoliation, massages, and polish application, in a clean, sanitized home studio.</li><li>Consult with clients to determine preferred nail shapes, finishes, and treatments; recommend appropriate services and aftercare routines.</li><li>Prepare and maintain an organized workstation, ensuring all tools and surfaces meet health and safety standards.</li><li>Apply nail enhancements (gel, acrylic, or dip) as trained and approved by salon protocols; monitor product usage and ensure compatibility with client needs.</li><li>Provide nail art services and specialty finishes as requested, including maintenance tips for longevity.</li><li>Adhere to all safety, sanitation, and sanitation-standards, including proper sterilization of tools and safe handling of chemicals.</li><li>Educate clients on nail health, aftercare, and home maintenance to extend service results.</li><li>Manage appointment scheduling, track client preferences, and maintain accurate service records.</li><li>Deliver courteous, professional customer service and handle client inquiries or concerns promptly.</li><li>Collaborate with team members to ensure a seamless and premium client experience at every visit.</li></ul><p>Qualifications and Requirements</p><ul><li>High school diploma or equivalent; relevant beauty certification or diploma preferred.</li><li>1–5 years of hands-on experience in nail care, with a strong portfolio of manicure, pedicure, and nail art work.</li><li>Proficiency in manicure, pedicure, nail enhancements, shaping, cuticle care, and nail art techniques.</li><li>Knowledge of sanitation practices and ability to maintain a hygienic home studio environment.</li><li>Excellent communication and interpersonal skills; ability to build rapport with clients and manage expectations.</li><li>Strong time-management skills and reliability, with the ability to work independently in a home-based setting.</li><li>Flexibility to accommodate client schedules, including weekends or evenings as needed.</li><li>Optional: Basic knowledge of nail product chemistry and safety data sheets is a plus.</li></ul><p>Required Skills</p><ul><li>Attention to detail and precision in nail shaping and polish application</li><li>Creativity and artistic capability for nail art and design</li><li>Excellent sanitation and hygiene practices</li><li>Customer service excellence and active listening</li><li>Time management and multi-tasking under client-driven schedules</li></ul><p>Benefits and Perks</p><ul><li>Competitive compensation based on client bookings and services rendered</li><li>Flexible schedule aligned with client demand</li><li>Opportunities for growth within the home service network</li><li>Professional development and access to quality nail products and tools</li><li>Supportive, client-focused work environment with ongoing training</li></ul>