وظائف فنى بصريات في قطر

<ul><li>Execute precise testing procedures to verify product conformity to specifications and industry standards.</li><li>Conduct detailed inspections of raw materials, in-process components, and finished goods, identifying deviations.</li><li>Document all testing results, observations, and non-conformances accurately in compliance with quality systems.</li><li>Operate and maintain calibrated testing equipment, ensuring its readiness and reliability for accurate measurements.</li><li>Collaborate with production and engineering teams to troubleshoot quality issues and implement corrective actions.</li><li>Perform root cause analysis on defects and contribute to the development of preventative measures.</li><li>Maintain a clean and organized work area, adhering to safety protocols and Good Manufacturing Practices (GMP).</li><li>Participate in internal audits and support external regulatory inspections by providing necessary documentation.</li><li>Contribute to the continuous improvement of quality control processes and methodologies.</li><li>Ensure adherence to all relevant quality standards and regulatory requirements throughout the production lifecycle.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong attention to detail and a methodical approach to problem-solving.</p></li><li><p>Excellent documentation and record-keeping skills.</p></li><li><p>Ability to interpret technical drawings and specifications.</p></li><li><p>Effective communication skills, both written and verbal, to report findings clearly.</p></li><li><p>High School Diploma or equivalent; Associate's degree in a technical field preferred.</p></li><li><p>Proven experience (1+ years) in a Quality Assurance or Quality Control role within a plastic manufacturing, HDPE pipe extrusion, or a similar industry.</p></li><li><p>Familiarity with ISO 9001 or other relevant quality management systems.</p></li><li><p>Proficiency in using measurement tools such as calipers, micrometers, and gauges.</p></li></ul>

<p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings. Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required. Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD, MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels. Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System. Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs. Provide technical solutions and maintenance for all electrical system installed within QC Buildings. Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes. Generate technical layouts and technical reports. Understand and implement the basis of the Computer Maintenance Management Systems. Perform thermo graphic and analysis for the electrical equipment. Provide assistance and guidance to other technical teams, whenever required. Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate. The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p>

<p>To inspect, clean, maintain, and repair all mechanical and plumbing installations and systems. Maintains all lighting throughout hotel/retail. To maintain all HVAC units. To maintain all motor, belts, bearings, etc. To maintain all shop tools and equipment. To assist the Security Manager to maintain the Life Safety machinery and equipment, all mechanicals such as pumps and emergency diesel. Troubleshoot and repair all equipment that is non-operational. Do all necessary welding as required. Do all work orders pertain to the hotel. Assist other trades as required/retail Answer all calls and does repairs, if unable to do repairs, must notify the supervisor of the problem. Perform chemical test for boilers, chillers, swimming pool, etc. Operate BMS computer system. Is part of the fire response team, also on standby in the event of any emergencies. Does preventative maintenance as schedule by Engineering Office. Contact vendors and order necessary replacement/repair parts. Maintain adequate stock of parts/materials in the maintenance shop. Creatively resolve electrical/mechanical issues in order to keep the machinery operational. Computer skills (Word, Excel, Power Point) Ability to troubleshoot mechanical and electrical (PLC), make adjustments, and products changer-over, in a timely manner. To observe cleanliness at the place of work and on the job after completion of work. To ensure cleanliness of appearance and uniform, particularly when working in guest areas. To maintain the reading of water supply.</p><p><strong>Desired Candidate Profile</strong></p><p>Relevant building maintenance experience is an asset Strong interpersonal and problem solving abilities Highly responsible &amp; reliable</p>

<p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings. Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required. Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels. Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System. Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs. Provide technical solutions and maintenance for all electrical system installed within QC Buildings. Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes. Generate technical layouts and technical reports. Understand and implement the basis of the Computer Maintenance Management Systems. Perform thermo graphic and analysis for the electrical equipment. Provide assistance and guidance to other technical teams, whenever required. Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings. Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required. Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD, MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels. Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System. Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs. Provide technical solutions and maintenance for all electrical system installed within QC Buildings. Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes. Generate technical layouts and technical reports. Understand and implement the basis of the Computer Maintenance Management Systems. Perform thermo graphic and analysis for the electrical equipment. Provide assistance and guidance to other technical teams, whenever required. Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate. The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><ul><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Here's the Tube Fitter post formatted for Bayt's actual fields — just copy-paste each block in:</p><p><b>Job description</b> <i>(paste into the Job description box)</i></p><p>Elite Green is seeking an experienced Tube Fitter to join our EPC project team for instrumentation and process tubing works on oil &amp; gas projects. The successful candidate will be responsible for fabricating, installing, and terminating instrument tubing systems in accordance with P&amp;IDs, isometric drawings, and project specifications.</p><p>Key responsibilities:</p><ul><li>Fabricate, bend, and install stainless steel/carbon steel instrument tubing per isometric drawings and hook-up diagrams</li><li>Terminate tubing using compression fittings (Swagelok/Parker type) to correct torque specifications</li><li>Install tubing for pressure, flow, level, and temperature instrumentation, impulse lines, and pneumatic/hydraulic systems</li><li>Read and interpret P&amp;IDs, loop drawings, hook-up drawings, and instrument datasheets</li><li>Perform tube routing, tray/support installation, and cable/tube tray dressing as required</li><li>Conduct pressure/leak testing of completed tubing systems</li><li>Coordinate with instrument technicians and QC/QA for inspection, testing, and punch list closeout</li><li>Ensure work complies with project HSE procedures, especially for hot work, confined space, and working at height</li><li>Maintain accurate records of materials used, tubing runs completed, and test results</li></ul><p>Working hours: Sunday–Thursday, 9 AM–6 PM (site schedule may vary per project requirements)</p><p>Benefits: Accommodation, transportation, and site allowances (as applicable)</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Minimum 3–5 years' experience as a Tube Fitter in Oil &amp; Gas / EPC / Petrochemical projects</p><p>Proficient in tube bending (manual and hydraulic benders)</p><p>Skilled in compression fitting installation (Swagelok/Parker systems)</p><p>Strong knowledge of instrument hook-up drawings, P&amp;IDs, and isometrics</p><p>Experience with pressure testing and leak testing procedures</p><p>Ability to work at height, in confined spaces, and on rotational/shift schedules</p><p>Strong HSE awareness; safety passport/site induction certification preferred</p><p>Valid Qatar driving license preferred</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 234733 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Cargo &amp; Airport Operations <br> <br> <ul><li><span>Closing Date:</span> <span>2026-07-26</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Preventive &amp; Corrective Maintenance</p><p>• Perform routine preventive and predictive maintenance on field instruments.</p><p>• Troubleshoot instrumentation and control system failures.</p><p>• Repair and replace defective instruments and control components.</p><p>• Maintain calibration records and maintenance reports.</p><p><br></p><p>Instrumentation Work</p><p>• Install, calibrate, and test:</p><p>o Pressure transmitters</p><p>o Flow meters</p><p>o Level transmitters</p><p>o Temperature instruments</p><p>o Conductivity analyzers</p><p>o pH analyzers</p><p>o Chlorine analyzers</p><p>o Turbidity analyzers</p><p>• Perform loop checking and signal verification.</p><p><br></p><p>Control &amp; Automation Systems</p><p>• Maintain and troubleshoot PLC, RTU, HMI, SCADA, DCS, and control panels.</p><p>• Assist in commissioning and startup activities.</p><p>• Support control valve testing, tuning, and maintenance.</p><p>• Diagnose communication and network-related control issues.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Technical Certificate in:</p><p>o Instrumentation Engineering</p><p>o Electronics Engineering</p><p>o Electrical Engineering</p><p>o Automation Technology</p><p>• Additional certifications in PLC/SCADA or instrumentation are advantageous.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall be able to perform all the tasks of mechanical maintenance department. Following are the few listed jobs but not limited to</p><p>Perform and assist preventive maintenance, corrective maintenance and overhauling of all the mechanical equipment of power plant.</p><p>Should have knowledge of different types of valves, pumps, compressors, turbines, heat recovery steam generators, pipelines, pipe hangers, steam traps and all other mechanical equipment.</p><p>Shall be able to perform inspection/maintenance of tanks, heat recovery steam generators, MSF evaporators, condensers, etc.</p><p>Should have knowledge of special tools, hydraulic tools, pneumatic tools, power tools, lifting gears and hand tools.</p><p>Should be proactive in nature.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 08 years of experience required in the large industry out of those 04 years shall be in power plant and or desalination plant.</p><p>Able to Read, Write and Speak in English</p><p>Shall have knowledge of various mechanical equipment, overhauling/maintenance.</p><p></p></section>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p><b>Responsibilities:&nbsp;</b></p><p><br></p><p>To inspect, clean, maintain, and repair all mechanical and plumbing installations and systems. Maintains all lighting throughout hotel/retail. To maintain all HVAC units. To maintain all motor, belts, bearings, etc. To maintain all shop tools and equipment. To assist the Security Manager to maintain the Life Safety machinery and equipment, all mechanicals such as pumps and emergency diesel. Troubleshoot and repair all equipment that is non-operational. Do all necessary welding as required. Do all work orders pertain to the hotel. Assist other trades as required/retail Answer all calls and does repairs, if unable to do repairs, must notify the supervisor of the problem. Perform chemical test for boilers, chillers, swimming pool, etc. Operate BMS computer system. Is part of the fire response team, also on standby in the event of any emergencies. Does preventative maintenance as schedule by Engineering Office. Contact vendors and order necessary replacement/repair parts. Maintain adequate stock of parts/materials in the maintenance shop. Creatively resolve electrical/mechanical issues in order to keep the machinery operational. Computer skills (Word, Excel, Power Point) Ability to troubleshoot mechanical and electrical (PLC), make adjustments, and products changer-over, in a timely manner. To observe cleanliness at the place of work and on the job after completion of work. To ensure cleanliness of appearance and uniform, particularly when working in guest areas. To maintain the reading of water supply.</p><p><strong>Desired Candidate Profile</strong></p><p>Your experience and skills include: Relevant building maintenance experience is an asset Strong interpersonal and problem solving abilities Highly responsible &amp; reliable</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>Key Responsibilities</p><ul><li>Clinical Excellence: Diagnose complex oral and facial pain to determine pulp vitality and periapical status.</li><li>Root Canal Therapy: Perform advanced non-surgical primary root canal treatments and complex retreatments.</li><li>Endodontic Surgery: Execute surgical interventions including apicoectomies, root-end fillings, and perforation repairs.</li><li>Trauma Management: Treat acute dental-alveolar trauma, including tooth replantation and root fracture management.</li><li>Patient Care: Formulate comprehensive, patient-centered treatment plans using electronic health records.</li><li>Collaboration: Coordinate multidisciplinary care with general dentists and other dental specialists.</li><li>Quality Assurance: Maintain strict infection control standards and follow DHP safety protocols.</li></ul>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment: 1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints) 2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints) 3. Air Compressor 4. AHU fans and blower 5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels 6. Mechanical forklift 7. Mechanical manlift 8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers) Supervise, guide, and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>