وظائف فنى بصريات في قطر

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring for a client in Qatar. A reputable Medical Center in Qatar is looking for an experienced Oral Surgery Specialist to provide advanced surgical dental care while ensuring exceptional patient outcomes. Job Posting Date: 16/07/2026 Key Responsibilities Perform oral and maxillofacial surgical procedures. Diagnose and manage complex oral conditions. Develop treatment plans and provide post-operative care. Collaborate with multidisciplinary healthcare teams. Maintain accurate patient documentation and ensure compliance with clinical standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>DDS/DMD with specialisation in Oral Surgery.</li><li>Valid DHP License or eligibility in Qatar.</li><li>Relevant experience in oral and maxillofacial surgery.</li><li>Strong communication and patient care skills.</li></ul><p></p></section>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Diagnose, repair, and service automotive air conditioning systems (cars, vans, light/heavy vehicles)</p><p>Handle refrigerant gas charging, leak detection, and system flushing</p><p>Inspect compressors, condensers, evaporators, and electrical controls</p><p>Perform preventive maintenance to ensure optimal AC performance</p><p>Identify faults and recommend corrective actions</p><p>Maintain tools, equipment, and service records</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>ITI / Diploma in Automobile / HVAC or related field</li><li>Minimum 3–5 years of experience in automotive AC systems</li><li>Good knowledge of refrigerants, AC components, and diagnostics</li><li>Ability to troubleshoot electrical and mechanical faults</li><li>GCC experience preferred</li><li>Experience working with brands like Ashok Leyland, Mercedes Actros, Mitsubishi, Nissan, and Toyota .</li></ul><p></p></section>

<p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance of water quality monitoring equipment. Carry out calibration, troubleshooting, and repair of analyzers. Maintain and service pH, Chlorine, Conductivity, Turbidity, and other water quality analyzers.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Degree in Instrumentation, Electrical Engineering, or a related field. Minimum 5 years of experience in instrumentation maintenance and troubleshooting. Experience in water treatment plants and water quality monitoring systems Experience in maintenance and servicing of analytical instruments and online analyzers. Experience in using portable water quality testing equipment for measuring parameters such as pH, Chlorine, Conductivity, Turbidity, and other water quality parameters.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 231865 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-10</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p><strong>Principal:</strong> Qatar District Cooling Company<br><strong>Country:</strong> Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).<br>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)<br>3. Tank (Structures, valves and fittings, air vents)<br>4. Air handling Units (Filter, ducting, AHU Housing)<br>5. Filtration system (Filters, housings, pipe and fittings)<br>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system<br>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment • Troubleshoot and diagnose electrical and mechanical faults • Plan and schedule maintenance activities using SAP systems • Conduct daily toolbox meetings and ensure HSE compliance • Act as Designated Site Representative (DSR) for contractors • Implement maintenance checklists and standard procedures • Manage equipment spare parts and inventory • Support emergency shutdowns and planned maintenance • Prepare maintenance reports and documentation • Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration • 3-5 years HVAC maintenance experience • Petrochemical/oil & gas industry experience preferred • SAP or CMMS knowledge • BOSIET, H2S, Fire Watch certifications</p>

<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment • Troubleshoot and diagnose electrical and mechanical faults • Plan and schedule maintenance activities using SAP systems • Conduct daily toolbox meetings and ensure HSE compliance • Act as Designated Site Representative (DSR) for contractors • Implement maintenance checklists and standard procedures • Manage equipment spare parts and inventory • Support emergency shutdowns and planned maintenance • Prepare maintenance reports and documentation • Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration • 3-5 years HVAC maintenance experience • Petrochemical/oil & gas industry experience preferred • SAP or CMMS knowledge • BOSIET, H2S, Fire Watch certifications</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Min. 2 years experience in a similar role in a five-star Hotel brand</li><li>Strong troubleshooting skills and knowledge of safety procedures.</li><li>Able to communicate in English</li><li>Ability to work well under pressure in a fast-paced environment</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for dismounting, mounting, handling scrap (or take off tires) and balancing of all tires on customers vehicle, .performs wheel alignments and various related adjustments &amp; properly align vehicle as per company specifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Vocational Graduate or any equivalent course related to his line of work</li><li>Minimum of 3 years working experience in same field.</li><li>Experience mostly in wheel alignment/fitting/balancing of Japanese and American cars. Operate all related equipment and tools as trained. Operate independently and as a team member. Have the urge and ability to learn.</li><li>Not more than 41 years old.</li><li>Minimum of 3 years working experience in same field. Must Have experience in Wheel Alignment and background in mechanical job.</li></ul><p></p></section>

Position: Dermatologist Location: Qatar<br>Key Responsibilities:Diagnose and treat a wide range of dermatological conditions. Conduct consultations, examinations, and dermatological procedures. Develop appropriate treatment plans and provide follow-up care. Maintain accurate patient records and ensure high standards of patient care. Collaborate with other medical specialists when required. Requirements:MBBS with MD/Board Certification in Dermatology or equivalent. Minimum 5 years of relevant clinical experience. Valid Qatar DHP/MOPH License OR valid Data Flow and Prometric are mandatory. Strong clinical, communication, and patient-management skills. Previous experience in a hospital or reputed healthcare facility preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 2600009D <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-07-14</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 234415 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Corporate &amp; Commercial <br> <br> <ul><li><span>Closing Date:</span> <span>2026-07-15</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Min. 2 years experience in a similar role in a five-star Hotel brand Strong troubleshooting skills and knowledge of safety procedures. Able to communicate in English Ability to work well under pressure in a fast-paced environment</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 236326 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Corporate &amp; Commercial <br> <br> <ul><li><span>Closing Date:</span> <span>2026-09-01</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 234745 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Corporate &amp; Commercial <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-14</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings. Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required. Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System. Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs. Provide technical solutions and maintenance for all electrical system installed within QC Buildings, Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes. Generate technical layouts and technical reports. Understand and implement the basis of the Computer Maintenance Management Systems Perform thermo graphic and analysis for the electrical equipment. Provide assistance and guidance to other technical teams, whenever required Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate. The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>