وظائف هندسة كيميائية

Note: This is a long-term, stable part-time job that supports remote work. Please read the recruitment requirements carefully and fill out the application form accurately. Thank you.<br>WHAT YOU NEED to Have Doctorate PhD or equivalent advanced degree in the subject area Has published at least 5 papers in SCI / SSCI journals within/during the past Three years Thorough understanding of research methodologies and ethical principles within the relevant discipline Excellent analytical and critical thinking skills Strong written communication skills, with the ability to provide clear, concise, and constructive feedback Ability to adhere to deadlines and manage time effectively Commitment to maintaining confidentiality and objectivity Prior experience as a peer reviewer for academic journals is highly desirable Familiarity with online manuscript submission and review systems<br>WHAT YOU WILL DOAssess Novelty: Evaluate whether the manuscript is original and adds new knowledge or insights to the field of study. Evaluate Study Design and Methodology: Check whether the study design and methods are appropriate, comprehensive, and clearly described to ensure reproducibility. Literature Review: Ensure the manuscript thoroughly incorporates and cites relevant, up-to-date research in the field. Analyse Results and Conclusions: Determine whether results are presented clearly and appropriately, and whether conclusions are supported by the data and significant to the field. Provide Constructive Feedback: Suggest improvements and highlight any flaws, omissions, or ethical concerns. Recommend Publication: Based on your evaluation, the journal editor will decide whether the manuscript should be accepted, revised, or rejected.

Note: This is a long-term, stable part-time job that supports remote work. Please read the recruitment requirements carefully and fill out the application form accurately. Thank you.<br>WHAT YOU NEED to Have Doctorate PhD or equivalent advanced degree in the subject area Has published at least 5 papers in SCI / SSCI journals within/during the past Three years Thorough understanding of research methodologies and ethical principles within the relevant discipline Excellent analytical and critical thinking skills Strong written communication skills, with the ability to provide clear, concise, and constructive feedback Ability to adhere to deadlines and manage time effectively Commitment to maintaining confidentiality and objectivity Prior experience as a peer reviewer for academic journals is highly desirable Familiarity with online manuscript submission and review systems<br>WHAT YOU WILL DOAssess Novelty: Evaluate whether the manuscript is original and adds new knowledge or insights to the field of study. Evaluate Study Design and Methodology: Check whether the study design and methods are appropriate, comprehensive, and clearly described to ensure reproducibility. Literature Review: Ensure the manuscript thoroughly incorporates and cites relevant, up-to-date research in the field. Analyse Results and Conclusions: Determine whether results are presented clearly and appropriately, and whether conclusions are supported by the data and significant to the field. Provide Constructive Feedback: Suggest improvements and highlight any flaws, omissions, or ethical concerns. Recommend Publication: Based on your evaluation, the journal editor will decide whether the manuscript should be accepted, revised, or rejected.

<p>نظرة عامة عن الشركة والوظيفة</p><p>تُعد شركتنا رائدة في تقديم حلول العناية بالشعر وتجميل البشرة في قطر، ملتزمة بتوفير خدمات عالية الجودة وتجربة عمل مميزة للمتدربين وفرق العمل. نبحث عن اخصائية شعر شاملة للانضمام إلى فريقنا في دوام كامل، بهدف تطوير المهارات في مجال العناية بالشعر، العلاج والتصفيف، وتقديم استشارات مهنية للعملاء ضمن بيئة مهنية مبتكرة وداعمة.</p><p>المسؤوليات والواجبات الأساسية</p><ul><li>تشخيص احتياجات العملاء وتقديم استشارات تخص العناية بالشعر والتصفيف المناسبة لطبيعة الشعر ونمط الحياة.</li><li>إجراء جلسات تصفيف وتلوين وعلاجات فردية مع المحافظة على معايير السلامة والجودة.</li><li>إعداد خطط علاجية وشخصية للعملاء وتوثيقها في النظام الإداري لضمان المتابعة الفعالة.</li><li>التعامل مع معدات الصالون بشكل آمن وتطبيق إجراءات التعقيم والتطهير بشكل دوري.</li><li>تنسيق مواعيد العملاء والالتزام بجداول العمل وتقديم تجربة خدمة مميزة.</li><li>المشاركة في برامج التدريب المستمرة وتطوير المهارات الفنية والبيعية الأساسية.</li><li>التواصل الفعّال مع الفريق والإدارة لتبادل الملاحظات وتحسين الأداء العام.</li></ul><p>المؤهلات والمتطلبات</p><ul><li>درجة جامعية ذات صلة أو بكالوريوس/ليسانس في تخصص مناسب (يفضل علوم الشعر/العناية بالشعر والجمال).</li><li>خبرة سابقة في مجال الشعر أو التدريب الميداني يُفضل في بيئة عناية الشعر الشاملة.</li><li>القدرة على العمل في دوام كامل مع الالتزام بمواعيد العمل وجداول العملاء.</li><li>معرفة بالأدوات والتقنيات الحديثة في التصفيف والتلوين والعلاجات الكيميائية الآمنة.</li><li>إلمام بإجراءات السلامة والصحة المهنية ومعايير النظافة المعتمدة في المرافق التجميلية.</li><li>إجادة اللغة العربية (إتقان التواصل مع العملاء) والإنجليزية ضمن مستوى بسيط إلى متوسط حسب الحاجة.</li></ul><p>المهارات المطلوبة</p><ul><li>مهارات تصفيف وتلوين الشعر مع التفصيل الدقيق والتقنيات الحديثة.</li><li>قدرة على تقديم استشارات مهنية وتثقيف العملاء حول العناية بالشعر في المنزل.</li><li>مهارات تواصل قوية وخدمة عملاء عالية الجودة</li><li>العمل بروح الفريق والقدرة على تحمل ضغوط العمل وتقديم حلول سريعة.</li><li>الاهتمام بالتفاصيل والقدرة على تنظيم الوقت وإدارة المواعيد بفعالية.</li></ul><p>الفوائد والمزايا</p><ul><li>راتب تنافسي يتناسب مع الخبرة والمؤهلات، مع حوافز الأداء.</li><li>فرص تدريب وتطوير مهني داخلي وخارجي.</li><li>بيئة عمل داعمة ومهنية مع إمكانية التقدم المهني داخل الشركة.</li><li>أيام عمل منتظمة وتذاكر المواصلات أو بدائلها حسب السياسة الداخلية.</li></ul><p>مكان العمل: قطر (المنطقة/المحافظة: اختر الموقع).</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Plant Operation &amp; Process Control</p><p>• Operate and monitor SWRO plant processes through DCS/SCADA systems.</p><p>• Control plant parameters such as:</p><p> o Intake and pretreatment systems</p><p> o DAF and ultrafiltration units</p><p> o High-pressure pumps</p><p> o RO trains</p><p> o Chemical dosing systems</p><p> o Product water and distribution systems</p><p>• Respond to alarms and process deviations.</p><p>• Take corrective actions to maintain stable operation.</p><p><br></p><p>Monitoring &amp; Reporting</p><p>• Record operational data and prepare shift reports.</p><p>• Monitor water quality parameters.</p><p>• Analyze plant performance trends.</p><p>• Maintain accurate operational logs.</p><p><br></p><p>Coordination</p><p>• Coordinate with field operators during plant start-up, shutdown, and emergency situations.</p><p>• Supervise field activities from the control room.</p><p>• Communicate operational changes to maintenance and operations teams.</p><p><br></p><p>Maintenance Support</p><p>• Assist maintenance teams during troubleshooting and equipment isolation.</p><p>• Participate in calibration of instruments and process equipment.</p><p>• Support preventive maintenance activities.</p><p><br></p><p>Safety &amp; Compliance</p><p>• Follow HSE procedures and permit-to-work requirements.</p><p>• Ensure compliance with environmental and water quality regulations.</p><p>• Report abnormal conditions immediately.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Degree in:</p><p> o Chemical Engineering</p><p> o Mechanical Engineering</p><p> o Electrical Engineering</p><p> o Process Technology</p><p> o Water Treatment Technology</p><p>• Technical or trade qualification with relevant desalination experience may also be accepted.</p><p><br></p><p>Experience Requirements</p><p>• Typically 3–5 years or more in:</p><p> o SWRO desalination plants - 50 MLD or above</p><p> o Water treatment plants</p><p> o Wastewater treatment plants</p><p> o Process industries (chemical, power, oil &amp; gas)</p><p>• Experience operating DCS, SCADA, PLC systems.</p><p>• Knowledge of water treatment chemistry and chemical dosing systems.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervises the operations of gas production and gas wellhead treatment plants. Reviews and summarises plant data for past 24-hour period/day, plans gas production activities, weekly and monthly reports. Assist Planning engineers in setting priorities and follows upon, day to day maintenance work with appropriate personnel, authorizes hot and cold work permit. Participates in planning shutdown maintenance, inspection and work over schedules with relevant parties, taking into consideration production availability. Develops schedules with subordinates for planned shifts based on rotation. Drafts, discusses and implements approved policies and procedures covering work systems, plant operations and reporting requirements. Prepares the section's budget covering forecasts of annual expenditure in the categories of new capital and extraordinary items, transport, manpower, service equipment and ordinary revenue requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>13 years of experience including 3 years at a supervisory level. Educational Qualifications Diploma in Chemical Engineering or similar engineering</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Supervises the operations of gas production and gas wellhead treatment plants.&nbsp;</p><br><p>Reviews and summarises plant data for past 24-hour period/day, plans gas production activities, weekly and monthly reports.&nbsp;</p><br><p>Assist Planning engineers in setting priorities and follows upon, day to day maintenance work with appropriate personnel, authorizes hot and cold work permit.&nbsp;</p><br><p>Participates in planning shutdown maintenance, inspection and work over schedules with relevant parties, taking into consideration production availability.&nbsp;</p><br><p>Develops schedules with subordinates for planned shifts based on rotation.&nbsp;</p><br><p>Drafts, discusses and implements approved policies and procedures covering work systems, plant operations and reporting requirements.&nbsp;</p><br><p>Prepares the section's budget covering forecasts of annual expenditure in the categories of new capital and extraordinary items, transport, manpower, service equipment and ordinary revenue requirements.&nbsp;</p><br> <br><strong>Required Experience and Skills</strong><br><p>13 years of experience including 3 years at a supervisory level.&nbsp;&nbsp;</p><br> <br><strong>Educational Qualifications</strong><br><p>Diploma in Chemical Engineering or similar engineering&nbsp;</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>About the Role</p><p>PetroWhite Alpha is a leading manufacturer and supplier of specialty petroleum products. We are looking for an experienced **Sales Manager** to drive business growth for our **Waxes and Petroleum Jelly (PJ)** product portfolio across local and international markets.</p><p>This role is ideal for a commercially driven sales professional with proven experience in developing industrial customers, managing key accounts, and expanding sales within the wax and petroleum jelly industry.</p><br><br><p>## Key Responsibilities</p><ul><li><p>Develop and execute sales strategies to achieve revenue and growth targets.</p></li><li><p>Identify and acquire new customers in regional and international markets.</p></li><li><p>Manage existing key accounts and strengthen long-term customer relationships.</p></li><li><p>Prepare quotations, negotiate commercial agreements, and close sales opportunities.</p></li><li><p>Conduct market research and competitor analysis.</p></li><li><p>Coordinate closely with production, logistics, laboratory, and technical teams to ensure customer satisfaction.</p></li><li><p>Monitor forecasts, pricing, inventory, and customer requirements.</p></li><li><p>Follow up on customer payments and overdue accounts.</p></li><li><p>Represent the company at customer meetings, industry events, and international exhibitions.</p></li><li><p>Prepare regular sales forecasts, visit reports, and management reports.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Business, Marketing, Chemical Engineering, or a related field.</p></li><li><p>**Minimum 5 years of sales experience in Waxes and Petroleum Jelly (PJ).**</p></li><li><p>**Hands-on experience selling paraffin wax, microcrystalline wax, petroleum jelly, or related specialty petroleum products is mandatory.**</p></li><li><p>Strong B2B sales and business development experience.</p></li><li><p>Experience handling industrial customers and distributors.</p></li><li><p>Excellent negotiation and communication skills.</p></li><li><p>Ability to travel internationally when required.</p></li><li><p>Valid driving licence is an advantage.</p></li></ul><br><br><p>## Preferred Experience</p><p>Experience in one or more of the following industries:</p><ul><li><p>Cosmetics &amp; Personal Care</p></li><li><p>Candle Manufacturing</p></li><li><p>PVC &amp; Plastic Processing</p></li><li><p>Hot Melt Adhesives</p></li><li><p>Rubber Industry</p></li><li><p>Emulsion Wax</p></li><li><p>Packaging</p></li><li><p>Industrial Chemicals</p></li></ul><br><p>## What We Offer</p><ul><li><p>Competitive salary package</p></li><li><p>Performance-based incentives</p></li><li><p>Career growth opportunities</p></li><li><p>International business exposure</p></li><li><p>Supportive and professional working environment</p></li></ul><br><br><p>**Please note:** Applications without direct experience in **Waxes and Petroleum Jelly** will not be considered.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>MTBE Process Controller </strong><br> <strong>Location:</strong> Petrochemical Production Facility<br> <strong>Department:</strong> Production – MTBE<br> <strong>Reports To:</strong> MTBE Shift Engineer<br> <strong>Job Summary</strong><br> Responsible for monitoring and controlling MTBE plant operations through the Distributed Control System (DCS) to ensure safe, stable, and efficient production. Supports troubleshooting, emergency response, startups/shutdowns, and process optimization while maintaining compliance with operational and safety standards.<br> <strong>Key Responsibilities</strong><ul><li>Monitor and control plant operations via DCS.</li><li>Maintain process parameters within operating limits.</li><li>Adjust plant load as directed by the Shift Engineer.</li><li>Identify and resolve process abnormalities and deviations.</li><li>Respond to plant emergencies according to SOPs.</li><li>Participate in startups, shutdowns, catalyst loading/unloading, and special operations.</li><li>Review shift logs and conduct effective shift handovers.</li><li>Support troubleshooting and prepare technical inputs/reports.</li><li>Ensure compliance with safety, quality, and environmental requirements.</li><li>Mentor and support junior operators and trainees.</li></ul><strong>Qualifications</strong><ul><li>Diploma in Process Technology, Chemical Engineering, or equivalent.</li></ul><strong>Experience</strong><ul><li>4–6 years of DCS operation experience in MTBE or petrochemical plants.</li><li>Minimum 4 years of independent panel operation experience.</li><li>Experience with MTBE, Oleflex, Butamer, or Ethermax processes preferred.</li></ul><strong>Key Skills</strong><ul><li>DCS Operations</li><li>MTBE Process Knowledge</li><li>Process Troubleshooting</li><li>Emergency Response</li><li>Problem Solving</li><li>Communication</li><li>Attention to Detail</li><li>Safety Awareness</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> <p> We are looking for a highly motivated Process Optimization Engineer to join a leading organization in Qatar. </p> <p><br></p><p> <b> Key Requirements:&nbsp;</b></p><p><br></p><p>&nbsp;Bachelor s Degree in Chemical Engineering </p> <p> Minimum 5 years of experience in the Oil &amp; Gas or Petrochemical industry </p> <p> Experience in Polyethylene plants or Utilities operations </p> <p> Strong background in Process Engineering and Process Optimization </p> <p> Experience in plant performance analysis, troubleshooting, and continuous improvement initiatives </p> <p> Knowledge of process simulation, predictive modeling, and benchmarking studies </p> <p> Master s Degree in Chemical Engineering is an added advantage</p></div></section>

<p>Responsible for the safe loading operation of crude oil, NGL condensate and naphtha at Offshore berth- Single Point mooring and Multi Product Berth. Responsibility for all terminal metering and loading operations on a 24 hour cycle basis and assumes responsibility of the oil transportation pipelines, oil metering stations, utilities, pumps etc. of the Terminal. Supervision and control of all aspects of crude oil, naphtha and condensate tanker loading operations DCS (Distributed Control System) Panel from multi- product berth and single point mooring and checks, finalises the Bill of Lading quantity.</p><p><strong>Desired Candidate Profile</strong></p><p>8 years in Oil &amp; Gas Industry in Terminal Loading Operations. Educational Qualifications Higher National Diploma in Mechanical or Chemical Engineering is mandatory. Bachelor of Science or Engineering in Mechanical/Chemical Engineering is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><ul><li>Responsible for the safe loading operation of crude oil, NGL condensate and naphtha at Offshore berth- Single Point mooring and Multi Product Berth. Responsibility for all terminal metering and loading operations on a 24 hour cycle basis and assumes responsibility of the oil transportation pipelines, oil metering stations, utilities, pumps etc. of the Terminal.</li><li>Supervision and control of all aspects of crude oil, naphtha and condensate tanker loading operations DCS (Distributed Control System) Panel from multi- product berth and single point mooring and checks, finalises the Bill of Lading quantity.</li></ul> <br><strong>Required Experience and Skills</strong><br><p>8 years in Oil &amp; Gas Industry in Terminal Loading Operations.</p><br> <br><strong>Educational Qualifications</strong><br><p>Higher National Diploma in Mechanical or Chemical Engineering is mandatory. Bachelor of Science or Engineering in Mechanical/Chemical Engineering is preferred.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for an&nbsp;<strong>Fluid and Cement Supervisor</strong>for one of our clients with the following details:</p><br> <p><strong>Start Date: August 2026 </strong></p><br> <p><strong>Duration: 12 months</strong></p><br> <p><strong>Location: Offshore Al Khalij, Qatar&nbsp;</strong></p><br> <p><strong>Work status: Rotational (28 days ON – 28 days OFF), Single</strong></p><br> <p>QUALIFICATIONS &amp; EXPERIENCE&nbsp;</p><br> <ul> <li>Education: B.Sc. in Petroleum or Chemical Engineering, or equivalent.</li> <li>Professional experience: Minimum 8 years of relevant experience.</li> <li>Technical competencies: Chemistry, cementing and drilling mud competencies.</li> <li>Behavioural competencies: Ability to work under pressure and stressing conditions, team leader player, proactive, bold, creative and able to work in a multicultural environment, cross functional capabilities.</li> <li>Other competencies: Fluent in English, knowledge of French language is an asset.</li> </ul> <p>&nbsp;ACTIVITIES&nbsp;</p><br> <ul> <li>Knowledge of Company HSE policy, rules and procedures (HSE MS) and in particular ISO14001 standard.</li> <li>Observance of the company HSE policy, rules and procedures.</li> <li>Participation to HSE activities and global improvement (e.g. referential, reporting, REX, audits, Maestro, trainings, HSE action plans</li> <li>Full attention to be given to the daily operational activities at the rig, responsible for, and to ensure availability of all products, equipment, and personnel in a timely manner for fluids &amp; Cement support of the drilling operations.</li> <li>Optimize Drilling Fluids &amp; cement job / Manage consumption &amp; operations.</li> <li>Minimize F&amp;C NPT: operations anticipations, logistic, supervision.</li> <li>Ensure all Company rules and Guidelines for fluids and cement are followed (safety stock)</li> <li>Conduct and review Fluids and cement related programs.</li> <li>Ensure no shortage of chemicals Vs prognosed – Managed inventory.</li> <li>Be involved in planning and all logistics relative to the operations.</li> <li>Ensure Safety and Security of Personnel and Installation are applied.</li> <li>Supervise execution of plans, programs, and operations. Perform Technical and Operational feed backs and analysis.</li> <li>Follow up, analyze, and validate data and reporting of well operations</li> <li>Follow up mud and cement operations on site.</li> <li>Analyse risks, anticipate potential issues, propose alternatives</li> <li>Control service ‘providers’ performance for safety and efficiency.</li> <li>Follow up and control costs of operations within budget and procedures.</li> <li>Support DRW offshore team effort to have no FAT, no LTI, no blowout, no major spill.</li> <li>Conduct &amp; drive the development of QHSE performance plan for DRW.</li> <li>Relay and promote Offshore DRW Safety campaigns and initiatives (Stop cards, Perfect days, awareness campaign)</li> <li>F&amp;C contractor services to embrace our safety culture (Our Life First program/Golden Rule).</li> <li>Lead Co-site &amp; safety meeting preparation.</li> <li>Get involved in SIMOPS visit &amp; follow up.</li> <li>Mandatory safety training and medicals: HSE (CR EP FP 250) / EP Ethics &amp; compliance @ 100%</li> </ul> <br> </div>

Key Responsibilities:✔ Lead CAPEX projects from concept to commissioning✔ Drive process improvements to enhance OEE, yield, and operational efficiency✔ Manage new product industrialization (NPI) from pilot to commercial production✔ Lead automation and digitalization initiatives (PLC, SCADA, MES, IoT)✔ Coordinate cross-functional teams, vendors, and stakeholders✔ Ensure compliance with HACCP, FSSC 22000/ISO 22000, and hygienic design standards<br>Qualifications:✅ Bachelor's Degree in Food Engineering, Chemical Engineering, Mechanical Engineering, Dairy Technology, or a related field✅ 5–8 years of experience in dairy or food & beverage manufacturing✅ Experience in CAPEX, process engineering, automation, and continuous improvement✅ Knowledge of dairy processing technologies, CIP/SIP, HACCP, and food safety standards✅ PMP/PRINCE2 and Lean Six Sigma certifications are an advantage<br>???? Location: Qatar

<p>We are seeking a Technical Sales Engineer to join our Flow Products Division and support the sales of industrial flow products. The role will focus on identifying new business opportunities, managing customer relationships, providing technical solutions, and driving sales growth. The ideal candidate will have proven sales experience with flow products, particularly pumps and valves, and a strong understanding of industrial applications.</p><p>Key Requirements</p><ul><li>Proven experience in the sales of flow products , like pumps and valves .</li></ul><p>Other Qualifications</p><ul><li>Bachelor's degree in Mechanical Engineering, Chemical Engineering, Industrial Engineering, or a related engineering discipline.</li><li>Strong communication, presentation, and negotiation skills.</li><li>Excellent customer relationship management skills.</li><li>Strong analytical and problem-solving capabilities.</li><li>Ability to work independently and manage multiple sales opportunities.</li></ul><p>Key Responsibilities</p><ul><li>Develop and grow sales opportunities for pumps, valves, and other flow products.</li><li>Identify new customers and maintain strong relationships with existing accounts.</li><li>Understand customer requirements and recommend appropriate technical solutions.</li><li>Prepare technical proposals, commercial quotations, and tender submissions.</li><li>Conduct customer visits, product presentations, and technical discussions.</li><li>Coordinate with engineering, procurement, and operations teams to ensure successful project execution.</li><li>Negotiate commercial terms and support contract finalization.</li><li>Monitor market trends, competitor activities, and customer requirements to identify business opportunities.</li><li>Achieve assigned sales targets and contribute to the overall growth of the Flow Products Division.</li><li>Maintain accurate sales forecasts, customer records, and commercial reports.</li></ul><p>If you would like to know more about the Global Consulting Bootcamp Visit: https://caseinpointco.com/global-consultant-bootcamp/</p><p>If you would like to know more about the MC Club Visit: https://menaconsultant.com/mc-club/</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Proven experience in the sales of flow products , like pumps and valves .</li><li>Bachelor's degree in Mechanical Engineering, Chemical Engineering, Industrial Engineering, or a related engineering discipline.</li><li>Strong communication, presentation, and negotiation skills.</li><li>Excellent customer relationship management skills.</li><li>Strong analytical and problem-solving capabilities.</li><li>Ability to work independently and manage multiple sales opportunities.</li></ul>

An international consultancy engineering company is seeking a Oil / Petroleum and Gas storage facility Expert for its Oil and Gas project in East-Africa, Rwanda. Qualifications:The expert shall hold a bachelor/ master’s degree in a field of oil/ Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or Civil Engineering (with specialization in oil/petroleum and gas infrastructure). Possession of professional certificate in occupational Health Safety administration is a must.<br>Experience:The oil/petroleum and gas storage facility expert with a bachelor's degree shall have 15 years of extensive experience in construction supervision, particularly in industrial facilities, storage tanks, Compressed Natural Gas (CNG) or liquified petroleum gas (LPG) infrastructure. Direct experience with the construction and supervision of CNG/LPG facility or similar hazardous material storage facilities is highly desirable. Knowledge of local, and international regulations and standards related to LPG storage and handling is recommended and 10 years of experience for a master’s degree holder.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Performs a variety of process engineering duties in the plant. Incudes monitoring performance of plants and facilities, preparing daily performance summary, and recommending corrective actions to deal with abnormalities. Prepares studies to develop, test and implement changes in plant operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 6 years hands-on experience in process/operations in Refinery or Linear Alkyl Benzene plant.</li><li>Fluent in spoken and written English language.</li><li>Good personal &amp; oral communication skills.</li><li>Proficient in Process simulation tools in Refinery or in Linear Alkyl Benzene plant.</li><li>Professional usage of Refinery Information System (RIS), Process Historian Data (PHD), Laboratory information system, SAP, off-site Automation software's applications and PC software, such as, Microsoft Project, Excel, Graphics/Presentation packages, Workflow charting ... etc.</li><li>Good knowledge of ISO 9001:2015, ISO17025 and ISO 14000 requirements to be able to implement the Refinery's IMS procedures.</li><li>Good comprehension of applicable International Standards in Refinery.</li><li>Analytical skills in Refinery or LAB plant economics business.</li><li>Presentation and communication skills, ability to draft effective written Technical documents.</li><li>BSc in Chemical Engineering or in Petroleum Processing Engineering.</li></ul><p></p></section>

We are looking for an experienced and results-oriented Export Sales Officer for our Client<br>Key Responsibilities:<br>Develop and expand international markets for Base Oil, Lubricants and Chemical products. Identify and develop new customers, distributors, traders and business partners. Manage existing international customer accounts and ensure strong customer relationships. Prepare quotations, negotiate prices and commercial terms, and close sales. Handle export orders and coordinate with logistics, shipping, finance and production teams. Monitor international market trends, competitor activities and product pricing. Develop new territories and achieve agreed export sales targets. Participate in international exhibitions, customer visits and business-development activities.<br>Requirements:<br>Bachelor's degree in Business, Marketing, Chemical Engineering, Petroleum Engineering or related field. Minimum 3–5 years of experience in Export Sales / International Sales. Experience in Base Oil, Lubricants, Chemicals, Petrochemicals, Petroleum Products or Oil & Gas is highly preferred. Strong knowledge of international B2B sales and business development. Experience dealing with international distributors, traders and industrial customers. Knowledge of export documentation, Incoterms, LC/TT and international shipping. Excellent communication, negotiation and presentation skills. Strong English communication skills. Willingness to travel internationally. Hindi language mandatory

Primary Purpose Of The Job<br><br>Performs a variety of process engineering duties in the plant. Incudes monitoring performance of plants and facilities, preparing daily performance summary, and recommending corrective actions to deal with abnormalities. Prepares studies to develop, test and implement changes in plant operations.<br><br>Required Experience And Skills<br><br>Minimum 6 years hands-on experience in process/operations in Refinery or Linear Alkyl Benzene plant. Fluent in spoken and written English language. Good personal & oral communication skills. Proficient in Process simulation tools in Refinery or in Linear Alkyl Benzene plant. Professional usage of Refinery Information System (RIS), Process Historian Data (PHD), Laboratory information system, SAP, off-site Automation software’s applications and PC software, such as, Microsoft Project, Excel, Graphics/Presentation packages, Workflow charting … etc. Good knowledge of ISO 9001:2015, ISO17025 and ISO 14000 requirements to be able to implement the Refinery's IMS procedures. Good comprehension of applicable International Standards in Refinery. Analytical skills in Refinery or LAB plant economics business. Presentation and communication skills, ability to draft effective written Technical documents.<br><br>Educational Qualifications<br><br>BSc in Chemical Engineering or in Petroleum Processing Engineering.

Primary Purpose Of The Job<br><br>Performs a variety of process engineering duties in the plant. Incudes monitoring performance of plants and facilities, preparing daily performance summary, and recommending corrective actions to deal with abnormalities. Prepares studies to develop, test and implement changes in plant operations.<br><br>Required Experience And Skills<br><br>Minimum 6 years hands-on experience in process/operations in Refinery or Linear Alkyl Benzene plant. Fluent in spoken and written English language. Good personal & oral communication skills. Proficient in Process simulation tools in Refinery or in Linear Alkyl Benzene plant. Professional usage of Refinery Information System (RIS), Process Historian Data (PHD), Laboratory information system, SAP, off-site Automation software’s applications and PC software, such as, Microsoft Project, Excel, Graphics/Presentation packages, Workflow charting … etc. Good knowledge of ISO 9001:2015, ISO17025 and ISO 14000 requirements to be able to implement the Refinery's IMS procedures. Good comprehension of applicable International Standards in Refinery. Analytical skills in Refinery or LAB plant economics business. Presentation and communication skills, ability to draft effective written Technical documents.<br><br>Educational Qualifications<br><br>BSc in Chemical Engineering or in Petroleum Processing Engineering.

Overview<br><br>A technical service and application engineer role providing on-site support to customers and partnering with sales staff to deliver solution-driven water treatment services in downstream (petrochemical) facilities.<br><br>Key Responsibilities<br><br>Petrochemical experience is mentioned in the requirements<br><br>Collaborate with District Sales Representatives to launch and support new chemical treatment applications.<br><br>Perform routine and technical service tasks: system audits, sample testing, data logging, reporting, and inventory management.<br><br>Install, calibrate, and maintain feed and monitoring equipment.<br><br>Troubleshoot operational issues, recommend corrective actions, and escalate complex challenges.<br><br>Build strong working relationships with customer personnel and support best practices implementation.<br><br>Capture service reports, assist with chemical ordering, and support technical proposals.<br><br>Qualifications<br><br>Bachelor’s degree in chemical engineering.<br><br>1–3 years’ experience in water treatment.<br><br>Valid driver’s license and acceptable driving record.<br><br>Familiarity with chemical feed systems, monitoring equipment, and basic process instrumentation.<br><br>Knowledge in Microsoft Office, and strong communication and relationship skills.<br><br>Our Commitment to a Culture of Inclusion & Belonging<br><br>Ecolab is committed to fair and equal treatment of associates and applicants and furthering the principles of Equal Opportunity to Employment. We will recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance in all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement. Ecolab will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin,citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, or disability.