وظائف مهندس طاقة شمسية في قطر

Role- Power platform Administrator Experience - 5+ years Location- Qatar <br>Mandatory Skills Power Platform Administration, Governance, Security & Compliance, Microsoft 365<br>Detailed JD - Power Platform Administrator with 5 to 8 years of IT experience, including 4+ years in Microsoft 365, Share Point Online, and Power Platform governance. PL-200 or PL-900 certification preferred with strong analytical thinking, problem-solving and stakeholder management skills. Responsible for administration, security, governance, and stability of the MATAR Power Platform tenant. <br>Key Responsibilities - Manage Power Platform environments, Dataverse capacity, and tenant configuration.<br>Maintain access controls, Data Loss Prevention policies, connector governance, and access reviews. <br> Operate the CoE Starter Kit for inventory, monitoring, and governance reporting. <br>Monitor platform health, alerts, capacity, and performance trends. <br>Manage licensing, usage analysis, and cost optimization. <br>Maintain evidence, reports, and records for audit, compliance, and cybersecurity needs. <br>Coordinate with Cybersecurity, SOC, and IT Operations on risks, incidents, and remediation.

Role- Power platform Administrator Experience - 5+ years Location- Qatar <br>Mandatory Skills Power Platform Administration, Governance, Security & Compliance, Microsoft 365<br>Detailed JD - Power Platform Administrator with 5 to 8 years of IT experience, including 4+ years in Microsoft 365, Share Point Online, and Power Platform governance. PL-200 or PL-900 certification preferred with strong analytical thinking, problem-solving and stakeholder management skills. Responsible for administration, security, governance, and stability of the MATAR Power Platform tenant. <br>Key Responsibilities - Manage Power Platform environments, Dataverse capacity, and tenant configuration.<br>Maintain access controls, Data Loss Prevention policies, connector governance, and access reviews. <br> Operate the CoE Starter Kit for inventory, monitoring, and governance reporting. <br>Monitor platform health, alerts, capacity, and performance trends. <br>Manage licensing, usage analysis, and cost optimization. <br>Maintain evidence, reports, and records for audit, compliance, and cybersecurity needs. <br>Coordinate with Cybersecurity, SOC, and IT Operations on risks, incidents, and remediation.

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>ESSENTIAL JOB FUNCTIONS:<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels Checks equipment for serviceability Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment Modifies equipment according to technical publications. Accomplishes operating and repair tasks Checks installed equipment to ensure compliance with publications, policies and directives Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels Performs electrical power control and distribution functions Maintains and repairs electrical power generating equipment, automatic transfer panels Performs inspections. Interprets inspection findings and determines corrective action Identifies and records engine and generator malfunctions Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment Removes, repairs, and replaces defective power generating equipment components Performs corrosion control Inspects and replaces gauges and meters. Bench checks components and subassemblies Tests and calibrates repaired items Reviews performance data and maintenance records to determine adequacy of maintenance Interprets data related to electrical power generating systems to prevent potential systems failure Advises on problems installing and repairing electrical power production equipment Solves maintenance problems Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics Develops and establishes maintenance and operating procedures to ensure maximum efficiency Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies Performs other duties as required<br><br>Requirements<br><br>EDUCATION & EXPERIENCE:<br><br>High School diploma or equivalent A minimum of 5 years' experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>KNOWLEDGE & SKILLS:<br><br>Must possess strong organizational skills with attention to detail and follow up Must be able to multi-task in a fast-paced environment Must be customer service oriented Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems<br><br>ADDITIONAL REQUIREMENTS:<br><br>Must possess a valid U. S. Driver's License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures Must be able to endure long hours, exposure to weather and hazardous conditions<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Global Dimensions does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits. Equal Opportunity Employer/Veterans/Disabled.

The Electrical Power Production Section Supervisor installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels Perform inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 10 (ten) years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified USAF 7-Level AAS Power Pro Completion of a basic electrical power production course in the military, trade school or Union shop is desired.<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with an attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Electrical Power Production Section Supervisor installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels Perform inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 10 (ten) years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified USAF 7-Level AAS Power Pro Completion of a basic electrical power production course in the military, trade school or Union shop is desired.<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with an attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a highly experienced engineer to support the delivery of sustainable infrastructure projects. The successful candidate will oversee installation, commissioning, technical support and project coordination while ensuring compliance with engineering and environmental standards.</p><p>Key Responsibilities</p><ul><li>Support the installation and integration of sustainable engineering systems.</li><li>Review project designs and provide technical recommendations.</li><li>Coordinate installation, testing and commissioning activities.</li><li>Monitor system performance and recommend improvements.</li><li>Provide advanced technical troubleshooting and support.</li><li>Prepare engineering reports and project documentation.</li><li>Mentor junior engineering staff.</li><li>Ensure compliance with quality, environmental and safety standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Renewable Energy, Electrical Engineering or related field.</li><li>Professional certifications relevant to renewable energy or sustainable engineering.</li><li>Extensive experience delivering large-scale infrastructure projects.</li><li>Strong project coordination and technical leadership skills.</li></ul><p></p></section>

???? We're Hiring: Group Executive Chef???? Location: Doha, Qatar???? Salary: QAR 18,000 – QAR 20,000 per month???? Experience Required: 10–12+ Years About the Role We are seeking an experienced Group Executive Chef to lead culinary operations across multiple premium dining concepts and a central production kitchen in Doha, Qatar. This leadership role is responsible for driving culinary excellence, recipe standardization, food quality, cost control, operational efficiency, and team development across multiple outlets. The ideal candidate is a hands-on leader with extensive experience in fine dining, particularly Indian cuisine, and a proven track record of managing multi-outlet operations in the GCC. Key Responsibilities Lead culinary operations across multiple restaurant brands and the central kitchen. Ensure consistent food quality, presentation, and recipe standardization across all locations. Drive food cost (COGS) optimization, menu engineering, and profitability. Develop, implement, and maintain standardized recipes and kitchen SOPs. Mentor and lead Head Chefs, Sous Chefs, Pastry Chefs, and kitchen teams. Conduct regular culinary audits to ensure quality and operational compliance. Oversee menu development, costing, and product innovation. Work closely with Food Safety and Operations teams to maintain HACCP and food safety compliance. Build structured culinary training programs and support leadership development. Support business expansion and franchise readiness through standardized culinary systems and documentation. Required Experience & Qualifications10–12+ years of progressive culinary leadership experience. Minimum 4 years as an Executive Chef or Group Executive Chef managing multiple restaurants. Strong GCC/Middle East hospitality experience is highly preferred. Proven expertise in Fine Dining Indian Cuisine is mandatory. Experience with Sri Lankan cuisine will be a strong advantage. Strong background in menu costing, recipe standardization, food cost control, and kitchen operations. Experience leading multicultural kitchen teams. Knowledge of HACCP, food safety standards, and GCC regulations. Formal Culinary Qualification (City & Guilds, WACS, or equivalent) preferred. Key Skills Multi-Outlet Kitchen Operations Fine Dining Culinary Leadership Indian Cuisine Expertise Menu Engineering & Cost Control Recipe Standardization Kitchen SOP Development Team Leadership & Training Food Safety & HACCP Compliance Inventory & Waste Management Strong Communication & Leadership Skills What We're Looking For A strategic yet hands-on culinary leader. Strong commercial and financial understanding of kitchen operations. Excellent leadership skills with the ability to inspire multicultural teams. Passion for quality, innovation, consistency, and operational excellence. Ability to build scalable culinary systems to support future business growth. If you have the expertise to lead premium culinary operations and are passionate about delivering exceptional dining experiences, we'd love to hear from you.???? Apply Now Send your updated CV to neha@aistalent.com

وظائف<br><br>1️⃣ مهندس ميكانيكي – خريج جديد | Nakilat | الدوحة، قطر<br><br>Mr.mstfa<br><br>اخر تحديث : منذ بضع شهور<br><br>1 دقائق للقراءة<br><br>_*]:min-w-0 gap-3"><br><br>1️⃣ مهندس ميكانيكي – خريج جديد | Nakilat | الدوحة، قطر<br><br>_*]:min-w-0 gap-3"><br><br>_*]:min-w-0 gap-3"><br><br>???? فرصة للخريجين | مهندس ميكانيكي – Nakilat | الدوحة<br><br>_*]:min-w-0 gap-3"><br><br>انضم لأكبر أسطول LNG في العالم!<br><br>_*]:min-w-0 gap-3"><br><br>Nakilat — شركة قطرية رائدة في نقل الطاقة وتشغيل أكبر أسطول ناقلات LNG عالمياً بـ 69 ناقلة — تفتح أبوابها لحديثي التخرج ضمن برنامج تطوير متكامل يمنحك خطة تطوير فردية (IDP) واضحة.<br><br>_*]:min-w-0 gap-3"><br><br>_*]:min-w-0 gap-3"><br><br>تفاصيل الوظيفة<br><br>_*]:min-w-0 gap-3"><br><br>المسمى الوظيفي Fresh Graduate Developee – Mechanical Engineering الشركة Nakilat – Qatar Gas Transport Company الموقع الدوحة، قطر طبيعة العمل دوام كامل – برنامج تطوير<br><br>_*]:min-w-0 gap-3"><br><br>_*]:min-w-0 gap-3"><br><br>المهام والمميزات<br><br>برنامج تطوير مهني منظم مع خطة IDP شخصيةتدريب عملي على رأس العمل في صناعة بحرية عالميةمسار واضح للتقدم الوظيفي في قطاع الطاقة والشحن البحريالعمل في بيئة متوافقة مع رؤية قطر الوطنية 2030<br><br>_*]:min-w-0 gap-3"><br><br>_*]:min-w-0 gap-3"><br><br>شروط التقديم<br><br>_*]:min-w-0 gap-3"><br><br>✅ بكالوريوس هندسة ميكانيكية معتمدة من وزارة التعليم القطرية ✅ حديث التخرج ✅ إجادة Microsoft Office ✅ مهارات تواصل وعمل جماعي<br><br>_*]:min-w-0 gap-3"><br><br>_*]:min-w-0 gap-3"><br><br>???? للتقديم المباشر<br><br>???? اضغط هنا للتقديم<br><br>_*]:min-w-0 gap-3"><br><br>تعديل المقال<br><br>الأقسام وظائف وظائف شاغره وظائف شاغره ، وظائف قطر<br><br>مقالات قد تهمك<br><br>تعليقات<br><br>إرسال تعليق

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Supervise the EPIC Contractors during the execution of construction activities at construction sites.</li> <li>Participate in reviewing detailed design drawings, method statements, material requisitions, and etc.</li> <li>Co-ordinate mobilization and de-mobilization of contractors on site.</li> </ul><br><p>* Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required.* Carry out daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.<br>* Handle all aspects of Electrical/Instrument Construction activities including site investigations, site surveys and etc.* Supervise and manage installation Earthing and Lightning Protection works.<br>* Supervise installation of Lighting and Small Power works. Manage and supervise cable tray installation and Fire Alarm System cable laying and termination works.* Co-ordination of finalizing Cable entries, cable routes, cable diversions etc.<br>* Manage and supervise cable tray installation and Instrument Control &amp; Power Cable laying and termination works.* Supervise Fiber Optic cable installation and splicing works.<br>* Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels.* Supervise installation of Control junction boxes and Panels.<br>* Good knowledge in reading and understanding Equipment Layout drawings.* Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc.<br>* Cable termination and Loop checking.* Co-ordinate pre-commissioning activities and assist during commissioning of facilities.<br>* Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates.* Witness SAT pre commissioning activities for equipment.<br>* Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.* Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits.<br>* Participate in development of as-built drawings/documentation.* Prepare Punch list for finished work prior to handing over to Company by contractor by paying special attention to all EHV equipment including Quality checks.<br>* Works closely with other Company Construction Supervisors (Mech / Elec).* Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendations for improvement.<br>* Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site.* Liaise and report with the QC Inspector on quality related matters.<br>* Liaise with the HSE Supervisor on safety related matters.* Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs).<br>* Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer.* Review contractors' construction plans and schedules including method statements and JSAs.</p><br><br><ul> <li>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</li> <li>Good skills in construction management, effective communication, conflict resolution. Relevant courses in HSE, QAQC and construction.</li> <li>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) Projects.</li> <li>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers) &amp; SCADA (Supervisory Control and Data Acquisition).</li> <li>This includes understanding safety standards, hazardous area classifications, and compliance with relevant codes and regulations.</li> <li>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</li> <li>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>* Supervise the EPIC Contractors during the execution of construction activities at construction site.* Participate in reviewing detailed design drawings, method statements, material requisitions, and etc.<br>* Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required.</p><br><br><p>* Supervise Fiber Optic cable installation and splicing works.* Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels.<br>* Supervise installation of Control junction boxes and Panels.* Good knowledge in reading and understanding Equipment Layout drawings.<br>* Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc.* Cable termination and Loop checking.<br>* Co-ordinate pre-commissioning activities and assist during commissioning of facilities.* Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates.<br>* Witness SAT pre commissioning activities for equipment.* Maintain a daily record of progress (daily diary) noting special comments.<br>* Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.* Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits.<br>* Participate in development of as-built drawings/documentation.* Prepare Punch list for finished work prior to hand over to Company by contractor by paying special attention to all ELV equipment including Quality checks.<br>* Works closely with other Company Construction Supervisors (Mech / Elect).* Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement.<br>* Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site.* Liaise and report with the QC Inspector on quality related matters.<br>* Liaise with the HSE Supervisor on safety related matters.* Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs).<br>* Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer.* Review contractors' construction plans and schedules including method statements and JSAs.</p><br><br><ul> <li>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</li> <li>Good skills in construction management, effective communication, conflict resolution. Relevant courses in HSE, QAQC and construction.</li> <li>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) Projects.</li> <li>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition), and other relevant instrumentation equipment used in oil and gas industries.</li> <li>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</li> <li>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Lead and manage multi-discipline QA/QC Team (QC Engineers and Inspectors) within the Department and ensure that the Inspection Test Plans and procedures are in place and adhered to throughout the project life cycle.</li> <li>Guide departmental staff and Project Team on various activities related to latest version of ISO 9001 Standard, QMS system documentation and certification requirements.</li> </ul><br><ul> <li>Promote a culture of continual improvement in quality practices and conduct quality training sessions for site personnel and subcontractors.</li> <li>Support incident investigation and root cause analysis related to quality failures impacting safety or performance.</li> <li>Prepare the Departmental &amp; Project QMS (Quality Management System) documentation in accordance with Company requirements.</li> <li>And further Manage and follow-up on implementation of QMS compliance requirements in Contracts.</li> <li>Prepare Project Quality Plan (PQP), KPIs and ensure the alignment of Contractor's PQP / KPIs with that of Company's. Coordinate and ensure implementation of QMS compliance requirements during all phases of the projects by Project teams and Contractors and submit necessary reports /data on monthly / quarterly basis.</li> <li>Participate in pre-qualification of Contractors/Sub-Contractors and Vendors, as required, monitor, and enforce compliance with ISO 9001/Company Quality standards.</li> <li>Participate in technical bid evaluation of the Bidders to ensure that Company quality requirements are included, addressed, and understood.</li> <li>Review the Scope of Services (SOS) and Scope of Work (SOW) and ensure that Company quality and technical requirements are incorporated which include Contractor/Supplier's QA/QC and relevant engineering and construction deliverables and any other Technical / Company System documents.</li> <li>Review and Approve Contractors'/Vendors' QA/QC documentation/deliverables for engineering, procurement, and construction phases, including welding and testing procedures.</li> <li>Review and respond to technical queries and technical deviations regarding welding and non-destructive testing.</li> <li>Review Contractor/Supplier's engineering and construction deliverables with specific emphasis to QA/QC and coordinate with relevant engineering discipline specialists on issues related to materials/corrosion/special processes etc; to enforce compliance to contract requirements.</li> <li>Ensure Deviation and non-conformance control systems are implemented to meet the departmental compliance requirements.</li> <li>Verify the resolution of deviations related to corrective and preventive actions and proper closure of NCRs and CARs.</li> <li>Surveillance and oversee the quality of project Construction works by visiting all project sites, attending weekly/monthly meetings with contractor, monitor the site QC inspector's functioning etc.</li> </ul><br><ul> <li>Bachelor's Degree in Engineering (preferably Electrical, Instrumentation, Controls Engineering or related field) or higher educational qualification in engineering from internationally recognized Universities.</li> <li>IRCA Certified QMS Lead Auditor Certification or similar.</li> <li>ASNT Level-II Certifications in RT/MT/PT/UT is a plus.</li> <li>Professional certification / affiliation with internationally recognized Quality organizations like CQI or ASQ or similar is desirable.</li> <li>Minimum 15 years of relevant experience (Minimum of five (5) years lead experience) in Oil &amp; Gas Industry as part of an internationally recognized EPIC contractor or end user/owner organization, covering large-scale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) construction projects and strong background in quality management systems.</li> <li>Brownfield experience is a plus.</li> <li>Hands on working experience in major EPIC projects with involvement in all phases of EP-I-C from working level to independently managing / Heading QA/QC function, with technical expertise in a core discipline.</li> <li>Working knowledge of using and interpreting Shell DEPs, International Codes / Standards (IEC, NEC, ASME, ASTM, NACE, AWS, API, BS, ISO and Local Regulations) related to the job and industry.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Responsible for supervision of construction works executed by contractors to ensure Department's assigned projects are constructed in accordance with the approved Scope of Work, engineering design, QHSE standards &amp; specifications.</li> <li>Review and provide comments on construction method statements, material submittals, commissioning procedures from start of construction of projects till completion and handover to end users.</li> </ul><br><ul> <li>Responsible as performing authority for Permit to Work by the Contractors.</li> <li>Supervise the site construction/installation of work of relevant engineering disciplines of assigned Construction/EPIC contracts and ensure that the work is carried out in safe manner and in compliance with Scope of Work, approved Engineering Standards and Specifications.</li> <li>Participate in constructability reviews as and when required.</li> <li>Review contractors' construction plans and schedules including method statements and JSAs.</li> <li>Coordinate and control the mobilization of contractors to sites including site lay down areas.</li> <li>Facilitate issuance of necessary permits and Gate passes when requested by Contractors.</li> <li>Check, inspect and test completed project work and/or arrange appropriate pre-commissioning inspections and tests. Initiate Mechanical Completion Certificates.</li> <li>Ensure and follow up completion and clearance of all Punch List items.</li> <li>Review and endorse red marked up and "as built" drawings.</li> <li>Participate in hand-over and acceptance, review commissioning procedures and participate in the commissioning of facilities.</li> <li>Review and endorse Construction Dossier for the assigned projects.</li> <li>Support Qatari development activities by ensuring that Qatari Nationals receive the proper job training and development.</li> </ul><br><ul> <li>Sc. in Mechanical Engineering discipline from a recognized University or Diploma in relevant engineering Discipline with extensive construction related experience.</li> <li>Minimum 10 to 15 years' experience in relevant construction and installation activities/works in oil &amp; gas projects including extensive experience in large scale solar (Photovoltaic) projects onshore.</li> <li>Experienced in conducting and managing protection of live oil and gas plants as per approved design requirements.</li> <li>Experienced in the implementation of construction industry best practices, systems, processes and standards.</li> <li>Good skills in construction management, effective communication, conflict resolution.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<br><ul><li><p>Lead and manage Electrical Engineering projects from concept through detailed engineering and project execution.</p></li><li><p>Manage multidisciplinary engineering teams and coordinate with clients, vendors, and project stakeholders.</p></li><li><p>Plan, monitor, and control engineering deliverables, schedules, budgets, and quality.</p></li><li><p>Review and approve engineering documents, design calculations, specifications, and drawings.</p></li><li><p>Ensure compliance with client standards, IEC, IEEE, NFPA, QatarEnergy, Saudi Aramco, and international engineering standards.</p></li><li><p>Interface with procurement, construction, commissioning, and operations teams.</p></li><li><p>Lead technical discussions, design reviews, HAZOP, constructability reviews, and client meetings.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Technical Expertise</strong></p><p>Hands-on experience in:</p><ul><li><p>HV & LV Power Distribution Systems</p></li><li><p>Power System Studies (ETAP)</p></li><li><p>Load Flow, Short Circuit & Protection Coordination</p></li><li><p>Electrical System Design</p></li><li><p>Electrical Equipment Sizing & Selection</p></li><li><p>Substations & Switchgear</p></li><li><p>UPS, Battery Charger & DC Systems</p></li><li><p>Earthing & Lightning Protection</p></li><li><p>Hazardous Area Classification</p></li><li><p>Cable Engineering</p></li><li><p>Lighting & Small Power</p></li><li><p>Electrical Heat Tracing</p></li><li><p>Motor Control Centres (MCC)</p></li><li><p>Variable Frequency Drives (VFD)</p></li><li><p>Power Management Systems (PMS)</p></li><li><p>Emergency Power Systems</p></li><li><p>Electrical Design Calculations</p></li><li><p>Electrical Material Specifications</p></li><li><p>Vendor Document Reviews</p></li></ul><p><strong>Preferred Skills</strong></p><ul><li><p>Excellent leadership and communication skills.</p></li><li><p>Client-facing experience with major Oil & Gas operators.</p></li><li><p>Experience managing multidisciplinary engineering teams.</p></li><li><p>GCC experience preferred.</p></li><li><p>PMP certification is an added advantage.</p><br></li></ul><p><strong>Preferred Client Experience</strong></p><p>Candidates with experience executing FEED/detailed engineering projects for major Oil & Gas operators such as:</p><ul><li><p><strong>QatarEnergy (Former Qatar Petroleum)</strong></p></li><li><p>Saudi Aramco</p></li><li><p>ADNOC</p></li><li><p>PDO</p></li><li><p>Kuwait Oil Company (KOC)</p></li><li><p>Oman LNG</p></li><li><p>Qatargas / RasGas</p></li><li><p>Shell</p></li><li><p>ExxonMobil</p></li><li><p>TotalEnergies</p></li><li><p>Chevron</p></li><li><p>BP</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Support Contractor to identify and submit the QA/QC documents (ITPs, QCPs, Welding / NDT / HT / Painting and other test procedures, MARs etc.,) in line with Construction program, their timely review and approval.</li> <li>Assist functional supervisor in review / approval of relevant QMS, Engg., &amp; Procurement documents, implementation of Quality Programs, and resolution of discipline matters escalated to the Project Management.</li> </ul><br><ul> <li>Ensure Implementation of Project QA/QC requirements at project site and suppliers / subcontractor's works complying to project specification and other technical requirements.</li> <li>Organize Pre-Activity Review meetings, attend Quality Walk through and QA/QC Weekly meetings.</li> <li>Undertake surveillance of on-site and off-site Structural / Piping / Pipeline shop and Field fabrication / Equipment Erection and associated inspection &amp; testing activities, Surface Preparation &amp; Painting activities, identify potential or actual non-conformances and direct contractor in taking necessary Correction, corrective and preventive actions.</li> <li>Initiate or ensure initiation of NCRs for the recurrent surveillance observations and non-conformities and coordinate / follow-up for RCA / Correction / Corrective /Preventive action proposals and timely close out.</li> <li>Monitor the progressive compilation of Material Test Certificates and Construction Records and their traceability.</li> <li>Monitor and verify the implementation of Preservation Management System.</li> <li>Ensure the Contractors maintain, update, and publish the IMTE Registers on regular basis and calibration records maintained.</li> <li>Ensure appropriate Systems / Processes / Procedures / Computer data base established by Contractor to maintain the Inspection and Test status during pre-fabrication, field erection, testing and statistical analysis of the data.</li> <li>Monitor the KPIs, Special processes and personnel performance.</li> <li>Participate in Project QHSE audits and Pre-Qualification Audits of Vend.rs / Suppliers / Sub-Contractors. Conduct ITP / QCP / MS / Process / Activity level compliance audits / Checks.</li> <li>Monitor Contactor/Sub-Contractor/Third party inspectors &amp; Engineers and Subordinates, performance, provides necessary support / guidance and reports to functional supervisor.</li> <li>Implement and enforce the elements of Company Quality Management System requirements applicable to your function.</li> <li>Exposed to Construction Site and Prevailing Climatic Conditions at least 50% of time.</li> <li>Ensure own safety and the safety of others who may be affected by Company business, whether the activity is under direct control or not.</li> </ul><br><ul> <li>Bachelor's degree in mechanical engineering (or Equivalent) from a recognized university.</li> <li>IRCA Certified QMS Lead Auditor.</li> <li>Welding Inspector Certification (CSWIP 3.1 / AWS-CWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP) is a must. Equivalent International Certifications acceptable.</li> <li>Having IIW-Welding Engineer / NDT level-3 and Certification in advanced NDT (PAUT, TOFD, Auto UT etc.,) will be an advantage.</li> <li>Professional membership / affiliations with recognized chartered or other professional institutions like ASNT / AWS / TWI / NACE / ASQ-CMQ&amp;OE, MCQI-CQP or similar is desirable.</li> <li>15 years' experience in the construction of major Green field or Brown-field Process Plants in Oil &amp; Gas industry including large scale solar (Photovoltaic) projects.</li> <li>Worked with major EPIC Contractors / End User in similar position in major projects with overall responsibility for the Quality of Piping / Mechanical discipline Construction and Commissioning activities. Sound working knowledge on QA/QC aspects, testing requirements and acceptance criteria related various Piping systems and Rotating / Stating Equipment and managing overall discipline's QA/QC aspects in major Oil and Gas Projects.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>Civil Engineer – Doha CLIENT Linum Consult’s client is a major international company working within the energy sector. They are currently seeking a Civil Engineer to be based in their Doha office. RESPONSIBILITIES • Overseeing construction projects, ensuring they are completed on time, within budget, and to the highest quality standards • Developing detailed project plans, including scope, schedule and budget • Reviewing engineering designs, drawings, and specifications using CAD software • Conducting site investigations and risk assessments • Ensuring designs comply with building codes, regulations, and local and international industry standards • Ensuring executed work complies with approved designs, local, national, and international building codes and regulations • Monitoring project progress, identifying potential delays, and implementing corrective actions</p><p>PROFILE • Degree qualification in Civil Engineering • At least 12 years’ experience in a Civil Engineer role within the heavy industry construction sector • Good understanding of the power and/or energy sectors, with a history of executing the civil engineering works on power plant construction projects • Fluent in spoken and written English • Currently working in Doha, with a good understanding of Qatar and GCC culture & working environment</p>

<p>Civil Engineer – Doha CLIENT Linum Consult’s client is a major international company working within the energy sector. They are currently seeking a Civil Engineer to be based in their Doha office. RESPONSIBILITIES • Overseeing construction projects, ensuring they are completed on time, within budget, and to the highest quality standards • Developing detailed project plans, including scope, schedule and budget • Reviewing engineering designs, drawings, and specifications using CAD software • Conducting site investigations and risk assessments • Ensuring designs comply with building codes, regulations, and local and international industry standards • Ensuring executed work complies with approved designs, local, national, and international building codes and regulations • Monitoring project progress, identifying potential delays, and implementing corrective actions</p><p>PROFILE • Degree qualification in Civil Engineering • At least 12 years’ experience in a Civil Engineer role within the heavy industry construction sector • Good understanding of the power and/or energy sectors, with a history of executing the civil engineering works on power plant construction projects • Fluent in spoken and written English • Currently working in Doha, with a good understanding of Qatar and GCC culture & working environment</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Commissioning Engineer with expertise in EHV Substations and Transmission Lines. The candidate will be responsible for commissioning, troubleshooting, and energization activities of electrical equipment, ensuring compliance with project specifications, safety standards, and client requirements.</p><p>Key Responsibilities</p><ul><li>Testing &amp; Commissioning Activities</li><li>Execute pre-commissioning and commissioning activities for 410kV, 765kV AIS/GIS Substations and EHV Transmission Lines.</li><li>Conduct testing of Power Transformers, Reactors, CTs, PTs/CVTs, Circuit Breakers, Isolators, Surge Arresters, and other switchyard equipment.</li><li>Perform relay testing, protection scheme checking, interlocking verification, and SCADA integration.</li><li>Carry out primary and secondary injection tests for protection systems.</li><li>Conduct transformer testing such as: IR &amp; PI Test TTR Test Winding Resistance Test Magnetic Balance Test Vector Group Verification OLTC Functional Testing</li><li>Execute GIS testing activities including SF6 gas handling, gas leakage checks, partial discharge testing, and functional testing.</li><li>Perform transmission line testing such as continuity checks, tower earthing resistance, OPGW testing, and line charging activities.</li><li>System Integration &amp; Energization</li><li>Coordinate with clients, consultants, OEMs, and SLDC/Power Utilities during commissioning and charging activities.</li><li>Prepare commissioning procedures, checklists, and test reports.</li><li>Ensure successful synchronisation, charging, and energization of substations and transmission lines.</li><li>Attend punch points and close commissioning observations.</li><li>Safety &amp; Quality</li><li>Ensure compliance with electrical safety standards and project HSE requirements.</li><li>Conduct risk assessments and toolbox talks before testing activities.</li><li>Follow quality procedures, inspection plans, and client specifications.</li><li>Maintain proper documentation and records of testing and commissioning activities.</li><li>Troubleshooting &amp; Maintenance</li><li>Identify and resolve commissioning issues related to protection systems, control circuits, and power equipment.</li><li>Analyse faults and recommend corrective actions.</li><li>Support defect liability and post-commissioning troubleshooting activities.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>NA</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>Seeking an experienced Senior Electrical Engineer with 12+ years of experience in the supervision, coordination, testing, and commissioning of electrical systems for mission-critical data center projects. The role will be responsible for ensuring the successful delivery of HV/LV power infrastructure, backup power systems, and electrical distribution networks while maintaining compliance with project specifications, industry standards, and operational reliability requirements.</p><br>Your role<ul><li>Supervise electrical construction activities for data center projects to ensure compliance with approved drawings, specifications, codes, and project requirements.</li><li>Oversee the installation, testing, and commissioning of HV and LV electrical systems, transformers, switchgear, and power distribution equipment.</li><li>Monitor the installation and operation of emergency power systems including generators, fuel systems, UPS systems, batteries, and associated controls.</li><li>Review electrical shop drawings, material submittals, method statements, and technical submissions for compliance with project requirements.</li><li>Coordinate electrical works with mechanical, civil, structural, architectural, ICT, and specialist vendor installations.</li><li>Conduct site inspections and quality audits to verify workmanship, installation standards, and material compliance.</li><li>Supervise installation and testing of earthing, bonding, and lightning protection systems.</li><li>Monitor cable routing, cable containment systems, power distribution networks, and equipment terminations.</li><li>Witness factory acceptance tests (FAT), site acceptance tests (SAT), pre-commissioning activities, and performance testing.</li><li>Review energization procedures and ensure safe execution of electrical system energization activities.</li><li>Support integrated systems testing (IST), commissioning, and operational readiness activities for mission-critical facilities.</li><li>Identify and resolve electrical design, construction, and interface issues in coordination with project stakeholders.</li><li>Ensure contractor compliance with project quality requirements, safety standards, and construction schedules.</li><li>Review inspection requests, testing records, commissioning reports, and QA/QC documentation.</li><li>Monitor contractor progress, resource allocation, and productivity, reporting risks and recommending corrective actions when required.</li><li>Participate in multidisciplinary coordination meetings and provide technical input on electrical engineering matters.</li><li>Support authority inspections, client witnessing activities, snagging inspections, and final project handover processes.</li><li>Prepare technical reports, progress updates, non-conformance reports (NCRs), and project status reports for client and consultant management teams.</li></ul>About you<ul><li>Bachelor's degree in Electrical Engineering. UPDA/MMUP Grade A</li><li>Data Center Experience [ at least 1 project is delivered in the last 5 years] Mandatory.</li><li><span>12+ years of experience.</span></li><li><span>HV/LV systems, transformers, switchgear, generators, UPS, earthing, lightning protection, power distribution, testing, energisation and commissioning. Data centre or mission-critical power systems experience preferred.</span></li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<p>Electrical Engineer – Qatar CLIENT Linum Consult’s client is a major organisation in the Middle East. They are currently seeking an Electrical Engineer from an industrial construction background to join their team in Qatar. RESPONSIBILITIES • Overseeing the electrical engineering design works for large-scale industrial buildings and power plant construction • Reviewing and advising on technical specifications of the electrical equipment, and ensuring the constructability of design packages • Coordinating with the construction teams • Ensuring compliance with deadlines and budgets • Ensuring compliance with health and safety requirements and regulations</p><p>PROFILE • Degree qualification in Electrical Engineering • At least 12 years of experience in similar roles on industrial or power construction projects • Experienced in the design of electrical equipment for large-scale building complexes • Strong familiarity with electrical safety codes and regulations in the GCC region • Good IT skills, particularly in MS Office • Excellent communication skills in English • First preference will be given to candidates currently in Qatar</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To assemble, dismantle, inspect, and maintain pumps and related mechanical components while ensuring quality, safety, and production standards are met.</p><p>Assemble and dismantle pumps and related mechanical components. Perform assembly and disassembly as per engineering instructions and quality standards. Use power tools, wrenches, and mechanical tools safely and effectively. Inspect pump components before assembly for quality and suitability. Measure components and record inspection and assembly reports. Prepare components and workstations for assembly operations. Conduct final quality checks to ensure proper pump functionality. Maintain cleanliness, organization, and safety in the work area. Report defects, abnormalities, or quality issues. Complete assigned work within production schedules while following HSE and safety standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 3 5 years of experience in mechanical assembly, maintenance, or pump manufacturing. Hands-on experience using power tools, wrenches, and assembly equipment. Knowledge of mechanical assembly and disassembly procedures. Technical Diploma or equivalent qualification in Mechanical Engineering or a related field (preferred). Ability to inspect, measure, and maintain quality standards during assembly.</p><p></p></section>