وظائف مراقب كهرباء في قطر

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels. Performs inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The responsibility is to assist in Testing and Commissioning field operations support for our engineers, technician and clients.</p><br> <p>The Operations Dept. is responsible for overall Testing &amp; Commissioning management including bid tendering, contractor selection, cost tracking, field operations, field supervision, quality control, data analysis, as well as HSE management.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Provides new and innovative solutions to our clients needs by proposing advance techniques for testing and commissioning activities as per best practices available globally.</p><br> <p>Provide on the job and class room training to the team and update them for any latest change in technology and methodology.</p><br> <p>Develops and creates Dept. Plans at the onset of all field operations.</p><br> <p>Work with HSE Engineer in support of safety programme.</p><br> <p>Travels to worksites to conduct safety audits of various sub contractors.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Assist in developing, implementing and managing the Test and Commissioning Strategy to ensure that project Special Systems fulfils all related contractual obligations.</p><br> <p>Prepare and make sure timely submission of project wise time sheet as per the prescribed standard of the Company.</p><br> <p>Arranges for the preparation and submission of all testing and commissioning plans as required by the contract.&nbsp;</p><br> <p>Review all testing and commissioning plans before submission.&nbsp;</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>• Knowledge in T &amp; C Project software.PMP, FIDIC preferred.T &amp; C ManagementCrisis Management &amp; ResolutionRisk Analysis ManagementDesign &amp; Development EngineeringFinancial Management </p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>4 years of experience, out of which 2 years as an Engineer in Operation/T &amp; C Dept.</p><br> <br><br><u><b>Competencies</b></u> <br>Electrical load diagrams / schedules and calculation L3<br>ELV cabling L3<br>Electrical wiring L3<br>Electrical power design L3<br>Voltage drop calculation L3<br>Agility<br>AI Fluency<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering<br><br><br><br> </div>

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>Essential Job Functions<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels. Checks equipment for serviceability. Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment. Modifies equipment according to technical publications. Accomplishes operating and repair tasks. Checks installed equipment to ensure compliance with publications, policies and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators. Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels. Performs electrical power control and distribution functions. Maintains and repairs electrical power generating equipment, automatic transfer panels. Performs inspections. Interprets inspection findings and determines corrective action. Identifies and records engine and generator malfunctions. Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating systems to prevent potential systems failure. Advises on problems installing and repairing electrical power production equipment. Solves maintenance problems. Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics. Develops and establishes maintenance and operating procedures to ensure maximum efficiency. Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Performs other duties as required<br><br>Education & Experience<br><br>High School diploma or equivalent. A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

WHO ARE WE?<br><br>At Nexans, our global vision is to electrify the future. Within the Group, this means innovating beyond cable to bring differentiation and added value to our customers through innovative services and solutions. With nearly 28,000 employees in 42 countries, the Group is leading the charge towards a new world of electrification that is safer, more sustainable, renewable, decarbonized, and accessible to all.<br><br>Our Distribution & Uses business group provides reliable cabling systems and smart energy solutions, including electrical accessories, to make buildings and power grids more efficient, people-oriented, and sustainable.<br><br>WELCOME TO THE TEAM<br><br>Our story began in 2008 as a joint venture between Nexans and Al Mirqab Capital, fully managed by Nexans. We have been involved in many of Qatar’s most ambitious projects for well-known end users such as Kahramaa, Qatar Rail, Qatar Energy, Qatar Foundation, and many others.<br><br>Our plant is among the most advanced Nexans factories in the Middle East and North Africa region. As a worldwide leader in cabling solutions, Nexans has transferred its technology and expertise to QICC. We are extremely proud to contribute to the rapid development of Qatar’s economy in alignment with Qatar National Vision 2030.<br><br>To support the continued development and operations of the company, we are looking to fill the position of Senior Back Office Sales Coordinator within the Sales Department.<br><br>GETTING TO KNOW YOUR ROLE<br><br>The Senior Back Office Sales Coordinator provides comprehensive operational and administrative support to the Sales function.<br><br>The role manages the sales process from the receipt of customer inquiries through quotation and tender preparation, order processing, delivery coordination, payment follow-up, document control, and after-sales support.<br><br>The position works closely with Front Office Sales, customers, and internal departments to ensure that commercial activities are completed accurately, efficiently, and on time.<br><br>MAKING AN IMPACT<br><br>Review customer technical specifications and prepare Sales Inquiry Sheets for submission to the Technical Department. Coordinate with Finance on price-list updates and prepare commercial offers with all required supporting documents. Ensure that bids, estimates, quotations, and tenders are complete, accurate, properly documented, and submitted on time. Work closely with the Technical and Sales teams to maintain updated price lists. Prepare customer qualification files, vendor-registration documents, brochures, and other commercial documentation. Coordinate document-control activities for customer inquiries, tenders, contracts, sales orders, and project correspondence. Ensure proper document filing, version control, traceability, confidentiality, and timely retrieval. Collect and analyze the reasons for quotations and tenders being won or lost. Prepare relevant commercial reports and provide feedback to the Sales team. Use sales tools and systems effectively to record, monitor, and track opportunities, quotations, orders, and customer commitments. Prepare sales orders, invoices, credit-limit requests, and other related documentation. Coordinate delivery arrangements and follow up on customer payment collection. Maintain accurate and updated project and order-status records. Communicate progress, risks, assumptions, and decisions to the Sales team and customers. Establish and maintain effective relationships with customers, including customers within the Oil & Gas sector. Ensure compliance with customer-specific documentation, tendering, vendor-registration, and commercial requirements. Provide a positive customer experience throughout the quotation, order, delivery, and after-sales process. Perform any other related duties as may be assigned. <br><br><br>What You Bring To The Job<br><br>University or college degree in Engineering, Business, Marketing, Accounting, or a related discipline. Document Control certification is required. Minimum of 3–5 years of experience in Sales Back Office, Sales Coordination, Tendering, or Commercial Support. Relevant experience working in a manufacturing or industrial environment is preferred. Experience supporting and coordinating the requirements of Oil & Gas sector customers. Knowledge of tender preparation, vendor registration, sales-order processing, and document-control requirements. Fluent written and spoken English. Excellent communication, business-writing, presentation, and interpersonal skills. Proficiency in Microsoft Office applications, particularly Word, Excel, Power Point, and Outlook. Familiarity with ERP, CRM, or document-management systems is an advantage. Strong analytical, reporting, coordination, and follow-up skills. High level of accuracy, attention to detail, organization, and document-control discipline. Ability to manage multiple priorities, meet deadlines, and work effectively under pressure. High degree of confidentiality, professionalism, sound judgment, and discretion. Proactive, customer-focused, collaborative, and solutions-oriented approach. Ability to work effectively with customers and stakeholders across all levels of the organization. <br><br><br>WHY WORK WITH US?<br><br>Professional and personal development opportunities. Dynamic, multidisciplinary, and international work environment. Opportunities to work with experienced professionals across the Nexans Group. A culture that empowers employees to develop their potential. Internal mobility opportunities that support professional and personal growth. Workmen’s compensation insurance and private medical insurance. Other benefits in accordance with QICC policy and Qatar Labour Law.

<p>Candidates should hold a recognized qualification in Marine Engineering and must hold a valid Certificate of Competency (CoC) as Officer in Charge of an Engineering Watch (OICEW) in accordance with STCW Convention Regulation III/1.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates should have sailing experience as a 4th Engineer or have completed a Cadetship on oil tankers, LNG carriers, and/or LPG carriers. Candidates should hold valid STCW certificates, possess good English communication skills, and meet the medical and certification requirements in accordance with international and company standards.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>To lead and support the engineering team in maintaining hotel facilities, equipment, and systems in a safe, efficient, and guest-focused manner, ensuring all maintenance activities meet operational, safety, and brand standards.<br><br>Key Responsibilities<br><br>Lead and supervise daily engineering operations, assigning tasks and monitoring performance. Ensure preventive and corrective maintenance is carried out for all hotel equipment, rooms, and public areas. Respond promptly to maintenance requests and breakdowns to minimize guest impact. Support the Chief Engineer in planning schedules, manpower allocation, and maintenance priorities. Ensure compliance with health, safety, and fire life safety regulations at all times. Monitor energy consumption and support initiatives to improve efficiency and reduce costs. Maintain accurate maintenance records, logs, and reports. Coordinate with other departments to support smooth hotel operations. Assist with training, coaching, and performance development of engineering team members. Supervise external contractors and ensure quality and safety standards are met.<br><br>Qualifications<br><br>Qualifications & Experience<br><br>Diploma or technical certification in Engineering, Electrical, Mechanical, or related field. Minimum 3–5 years of experience in hotel engineering or facility maintenance. Prior supervisory or team-leading experience preferred. Strong technical knowledge of HVAC, electrical, plumbing, and general maintenance systems. Good understanding of safety standards, preventive maintenance, and compliance requirements.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

COMMISSIONING COORDINATOR (ELECTRICAL) - Qatar Offshore<br><br>Qualification<br><br>Diploma/Degree in relevant engineering Discipline with extensive commissioning of offshore oil and gas facilities with exposure to construction activities.<br><br>Experience<br><br>A minimum of ten (10) years’ experience in pre-commissioning and commissioning activities in projects of oil & gas industry. Exposure to commissioning database Commissioning & Operational Readiness Software and Specifications. Understanding of commissioning for various types of work. - Mechanical/Elec/Instrumentation/Telecom. Good skills in commissioning management, effective communication, conflict resolution.<br><br>Primary Duties and Responsibilities<br><br>To function as Focal Point for supervision of project related pre-commissioning and commissioning works executed by contractors/their sub-contractors at facilities/contractor marine spread at offshore locations, in accordance with e-PTW requirements. Representative on board client facilities/contractor marine spread at offshore locations responsible for the project related pre-commissioning and commissioning activities. Prepare required work permits as permit applicant and ensure all stipulated e-PTW system requirements are adhered by contractor personnel for execution of identified work. Attend daily meeting with the Asset Holder for planning of works and reporting of progress/constraints. Laisse with PO HSEQ personnel for the required surveillance of construction/installation /commissioning works to ensure works are being carried out in line with approved HSEQ procedures. Coordinate with the contractor representative for movement of personnel and material for execution of work as per agreed schedule. Review contractor’s pre-commissioning and commissioning plans / schedules / procedures / JSAs. Monitor pre-commissioning and commissioning activities to ensure works are in line with approved procedures and AFC drawings. Inspect the completed work for mechanical completion and identified punch list items to start the pre commissioning activities. Coordinate with construction supervisors for clearance of punch list items and witness required pre-commissioning and commissioning activities. Provide daily Progress report of the activities to Head Commissioning and Logistics and Project Team as per identified distribution matrix. Scheduling and coordinating with Operations Representatives to witness site acceptance tests, loop checks etc. as per commissioning plan. Develop planning of the commissioning activities and ensure its implementation as per the approved commissioning plan and project schedule. Detail the activities into required systems and subsystems to facilitate commissioning and start up. Develop and arrange for approval of all commissioning handover checklists and certificates and coordinate with Contractor/Vendors to solve system/equipment performance problems. Work closely with project Construction Team, End User and Contractor to coordinate punch listing activities from beginning to end of the commissioning process including clearance and close out. Coordinate schedule for vendors’ presence/visits at site(s), on-job training to assist in the commissioning of critical equipment and processes. Support Qatari development activities by ensuring that Qatari Nationals receive the proper job training and development in order to realize the full potential for local talents and maximize contribution to project success.

Understand and operate advance electrical, plumbing, refrigeration and boiler system; and ensure that the following are<br><br>maintained:<br><br>Guest Rooms and Public Areas- plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical<br><br>equipment including lamps, air conditioners and cosmetic items.<br><br>Tools – To clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. To see that all tools used are<br><br>returned to the shop and secured in proper storage area. To protect and otherwise maintain assigned tool pouch and its tools<br><br>at the discretion of the engineering management.<br><br>Fire Alarm/Life Safety System - to monitor systems as necessary, to be fully informed of the system operation and to handle<br><br>emergencies involving the systems.<br><br>To have a working knowledge of fire sprinkler and emergency power systems. Act quickly to pre-warning or fire alarm;<br><br>proceed to the exact location and check the situation; report at once to immediate supervisor.<br><br>Energy Conservation - to observe and analyze energy and utilities usage in the hotel and on the grounds. To look for ways to<br><br>conserve energy and report any ideas to the engineering department.<br><br>Emergencies – to be available for any emergencies. Act in an engineering capacity to protect our guests and associates and<br><br>preserve the building and its systems during the emergency.<br><br>To act as quickly and responsibly as possible to return the building to its normal operating status, and inform any such<br><br>emergencies.<br><br>Accident Prevention and Safety - to be aware of all existing departmental Job Safety Analysis and to strive to work in an<br><br>accident-free manner and to create a safe work environment for others. To continuously look for conditions which may<br><br>endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found.<br><br>Records - to read, log, track, and interpret readings from meters, gauges, and other measuring units. To maintain a thorough<br><br>log of each day's activities and problems that occur and to ensure this information is passed on to other shifts. Take reading of<br><br>electric, water, and LPG meter for night shift duty. Take swimming pool reading three (3) times a day.<br><br>Attend to the Maintenance Request issued by concerned department.<br><br>Carry out Preventive Maintenance Program as per schedule.<br><br>Follow the proper shift taking over and handing over procedures.<br><br>Maintain the hotel facilities and related equipment in a safe and efficient manner.<br><br>Reads, learns, understands, and refers to the Standard Operating Procedures.<br><br>Performs other duties as assigned by immediate supervisor and/or Assistant Chief Engineer.<br><br>What We Need From You<br><br>PEOPLE<br><br>Liaison between Front Office, Housekeeping, Security, Health Club, Kitchen and the other departments within the hotel. Attend daily assignment sheet given by immediate supervisor Keep accurate completion and task records in the project files. Keep working areas clean and well organized. Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel. Complete all work assigned in a safe and professional manner. Maintain communication and give feedback with immediate supervisor to ensure that all needed materials, tools, and supplies are available or on order. Follow up on any items that may be on back order. Help train new hires on-the-job-trainees (On the Job Training) and cross-trainees. Provide training and technical advice to other engineers as needed or requested. Set an example of continuous self-development.<br><br>GENERAL<br><br>Communicate effectively with all other departments Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality. Attend meetings, training sessions and any other required meeting or training session. Identify opportunities to innovate service delivery and product offering to meet and exceed client expectations. Ensure safe work practices are adopted at all time and report any OHS concerns immediately to your direct manager or HR Manager. Maintains a working knowledge of all federal, state, and local laws, codes, and regulations.<br><br>RESPONSIBLE BUSINESS<br><br>Carry out repairs & maintenance works as required. Conduct preventative maintenance inspections and overhauling as stipulated Keep M&E Plant and Equipment in excellent working condition. Assigned projects are completed within designated timeframes Achieve Zero injury/accident by implementing safety procedures without compromise. Guest Satisfaction Feedback Efficient communication platform is consistently maintained Maintains a professional and organised work environment.<br><br>What We Need From You<br><br>PERSONAL CHARACTERISTICS<br><br>Education<br><br>High School graduate or any equivalent vocational training certificate.<br><br>Experience<br><br>2 years previous experience in a similar role Technical/Skills Understand and operate advanced electrical, plumbing, refrigeration, and boiler systems. Ability to read and understand test equipment, measuring devices and safety manuals Read and understand blueprints, schematic drawings, and technical parts breakdown. Competent Oral and Written English Communication Skills Communicate with different types of people to comprehend what they want and to provide them with information. Knowledge of all emergency procedures, including but not limited to, fire response, emergency medical procedures, bomb threat plan, water leak emergency procedure, gas leak procedures, electrical failure procedures and elevator procedures.<br><br>Personal Attributes<br><br>‘Can do’ attitude and have a drive for results Professionally groomed Able to multi task and work under time constraints Ability to prioritize and organize work assignments. Ability to be a clear thinker in pressure situations and exercise good judgments. Ability to focus attention on detail, speed and accuracy. Adaptable to change<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

Commissioning Lead (Offshore Electrical) <br><br>Assignment Details<br><br>Location: Offshore in Qatar Work schedule: 12-hour shifts, 7 days per week Rotation: 28 days on / 28 days off (28:28), paid only for the days you work. Project duration: 36 months<br><br>Key Job Accountabilities<br><br>Witness contractors’ scope of work and validate test and check sheets in accordance with project requirements. Follow-up construction activities and progress during Pre-shutdown and shutdown of Brownfield facilities. Oversee Brownfield offshore Pre-Commissioning & Commissioning execution activities and ensure their safety and compliant. Follow-up punch list creation, categorisation and clearance via weekly meeting with Contractor. Verify the completness of EPC CONTRACTOR’s completion dossiers for mechanical completion, pre-commissioning, and commissioning through to handover to permanent asset. Monitor and verify EPC Contractor’s preservation activities and ensure it meet project requirements. Coordinate, capture, and share SC Lessons Learned (LL) for inclusion in the project lessons learned register. Monitor progress and status of subsystems using the completion management system and ensure timely handovers. Oversee and control all mechanical completion (MC), pre-commissioning (CSA), and commissioning documentation (RFSU).<br><br>Qualifications<br><br> Bachelor’s Degree in Applied Sciences or Engineering. 8 years experience with large-project commissioning in the Oil & Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Strong knowledge and understanding of Completion certificate types. Strong knowledge and understanding of punch list categorization. Experience using Completion Management Systems (CMS) database such as PIMS, Win PCS, ICAPS, Hexagon or similar. Familiarity with construction, QA/QC, and Operations interfaces.. Have pre-commissioning, commissioning and start-up experience as a commissioning performer on major Oil & Gas projects.<br><br>To Apply<br><br>Interested candidates are encouraged to apply directly or send your CV to mahirah.marisa@airswift.com<br><br>Referrals are welcome too—feel free to share this opportunity with qualified professionals in your network.

Job Purpose<br><br>Advise and support electrical engineering activities during the EPC and start-up phases until handover to the permanent asset, whilst ensuring project deliverables meet Operations expectations in terms of safety, operability, reliability, and maintainability throughout the facility design lifecycle.<br><br>Internal Interfaces<br><br>Regular contact with Project Management Team (PMT) and Operations departments. Periodic contact with Engineering & Projects and HSEQ Group.<br><br>External Interfaces<br><br>Frequent contact with shareholders’ Subject Matter Experts (SMEs), EPC contractors, vendors, suppliers, and engineering consultants.<br><br>Job Context & Major Challenges<br><br>Effectively influence project decisions by considering not only CAPEX but also OPEX throughout the project lifecycle. Ensure compliance with QG specifications, processes, and procedures for assigned projects. Participate in reviews and provide technical inputs to designs and procedures for the implementation of approved field operations while mitigating risks associated with new technologies introduced by the project.<br><br>Financial Dimension<br><br>As defined for this job level in the Delegation of Authority and/or approved budget.<br><br>Generic Accountabilities<br><br>Safety, Health, Environment & Quality<br><br>Ensure all activities are undertaken in compliance with Company Safety, Health, Environment and Quality policies, regulations, and standards.<br><br>Qatarization Program<br><br>Contribute to the development of Qatari employees. This accountability is a condition of employment for expatriate employees.<br><br>Firewall Compliance<br><br>Ensure all activities undertaken comply with anti-trust and competition laws, as well as Company firewall policies and procedures.<br><br>Key Accountabilities<br><br>Provide a variety of Electrical Engineering support to contribute to division strategy and goals, including design reviews, commissioning, start-up, failure analysis, and advanced troubleshooting. Develop and implement surveillance and administration programs for critical Electrical Systems of new projects to achieve high standards of reliability, availability, and cyber security. Define and document best practices within the area of expertise and recommend performance improvement initiatives. Develop plans and work schedules to ensure effective completion of tasks and activities while meeting section and division KPIs. Provide technical input related to area of expertise to other disciplines and functions as required to support overall business objectives. Control and supervise electrical engineering activities undertaken by contractors, consultants, and service providers. Guide less experienced engineers in implementing company integrity and reliability systems. Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility. Maintain an Issue Register identifying and resolving critical issues, including new technology risks, that could impact project reliability, availability, and cyber security. Support high-risk commissioning activities for high-complexity and large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance.<br><br>Qualifications<br><br>Bachelor's Degree in Engineering.<br><br>Knowledge and/or Experience<br><br>Minimum 8 years of experience in an Oil & Gas environment. Attained specialist-level competencies as per Electrical Technical Competencies requirements.<br><br>Technical & Business Skills<br><br>Ability to work and make decisions under highly stressful conditions. Fluent in written and spoken English. Strong leadership and people management skills. Computer literacy with regular use of professional office and technical applications.<br><br>Interested? Please send your CV to norniqmah.abkarim@airswift.com.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance of water quality monitoring equipment. Carry out calibration, troubleshooting, and repair of analyzers. Maintain and service pH, Chlorine, Conductivity, Turbidity, and other water quality analyzers.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Degree in Instrumentation, Electrical Engineering, or a related field. Minimum 5 years of experience in instrumentation maintenance and troubleshooting. Experience in water treatment plants and water quality monitoring systems Experience in maintenance and servicing of analytical instruments and online analyzers. Experience in using portable water quality testing equipment for measuring parameters such as pH, Chlorine, Conductivity, Turbidity, and other water quality parameters.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A Telemetry Technician is responsible for continuously monitoring and interpreting in-patients' electrocardiogram (ECG or EKG) readings, which measures the heart's electrical activity. This professional ensures accurate and timely transmission of cardiac data to the medical team, providing crucial information for diagnosing and treating cardiac conditions. The role involves working in collaboration with nurses, physicians, and other healthcare professionals to maintain patients' overall well-being.</p><br><br> Sidra Medicine a healthy population is essential to a strong, prosperous society, and throughout 2020, Sidra continued to provide uninterrupted comprehensive specialist healthcare services for children and young people; and exceptional maternity, gynecology, and reproductive medical services for women, previously unavailable in Qatar and the region.” – H.H Sheikha Moza bint Nasser, Chairperson of Qatar Foundation&nbsp; <br> Sidra Medicine represents the vision of Her Highness Sheikha Moza bint Nasser who serves as its Chairperson. This high-tech facility is home to world-class patient care, scientific expertise, and educational resources. <br> </div>

<p>Implement company HSE policies, procedures and safe working practices. Conduct regular workplace/kitchen/site inspections. Identify hazards and carry out Risk Assessments / JSA. Monitor PPE and safe working practices. Ensure fire safety, emergency preparedness and evacuation procedures. Monitor chemical handling, electrical safety, LPG/gas safety, machinery and equipment safety. Investigate accidents, incidents and near misses and recommend corrective actions. Maintain HSE statistics, KPIs and monthly reports. Food Safety &amp; HACCP Implement and monitor HACCP-based food safety procedures. Monitor food receiving, storage, preparation, cooking, cooling and serving. Check temperature control and cold-chain procedures. Ensure proper food hygiene, personal hygiene and sanitation. Monitor cleaning and disinfection programs. Control cross-contamination risks. Maintain food safety records, checklists and inspection reports. Support food safety audits and corrective/preventive actions.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Advise and support electrical engineering activities during and start-up phase until handover to permanent asset whilst ensuring project deliverables meet operations expectations in term of safety, operability, reliability, and maintainability over the facility design life cycle.</li> </ul><br><ul> <li>Provide a variety of Electrical Engineering support to contribute to the division strategy and goals which include design reviews, commissioning, start-up, failure analysis and advanced troubleshooting.</li> <li>Develop and implement surveillance and administration programs for critical Electrical Systems of new projects to achieve high standards of reliability, availability and cyber security.</li> <li>Define and document best practices within the area of expertise and recommend performance improvement initiatives.</li> <li>Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs.</li> <li>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</li> <li>Control and supervise the electrical engineering activities undertaken by contractors, consultants and service providers.</li> <li>Guide less experienced engineers in implementing the company integrity and reliability systems.</li> <li>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</li> <li>Maintain Issue Register identifying and resolving critical issues including new technology risks under area of responsibility which could impact new project reliability, availability and cyber security.</li> <li>Support high risk commissioning activities for high complexities &amp; large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance.</li> </ul><br><ul> <li>Bachelor's degree in Engineering.</li> <li>8 years' experience in an oil and gas environment.</li> <li>Attained specialist level of competencies as per electrical technical competencies.</li> <li>Able to work and make decisions under highly stressing conditions.</li> <li>Fluent in written and spoken English.</li> <li>Strong leadership &amp; people skills.</li> <li>Computer literacy involving the regular use of professional office and technical applications.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

Job Description - Sr. Network Engineer Requirements:Bachelor’s degree/Diploma in IT, Computer Science, Networking, BE Electrical/Electronics or related field. Strong experience in Huawei e Sight network management and monitoring. Huawei HCIE certification required. Hands-on experience with Cisco NMS and network monitoring tools. Minimum CCNP certification. Strong knowledge of enterprise network infrastructure, routing, switching and network troubleshooting. Experience in network performance monitoring, fault diagnosis and technical support. Ability to manage and resolve complex network issues independently. Good communication and coordination skills. Experience: Minimum 8-10 years of relevant experience in network engineering, preferably with Huawei and Cisco enterprise networks.<br>Candidates who are currently available in Qatar are preferred. Candidates with relevant experience may send their CVs to the Techno Q Recruitment Team at recruitment@technoq.com

The Facilities Plant Operator will operate and monitor electromechanical plant and building systems, ensuring safe, efficient, and reliable operation across assigned facilities.<br><br>Key Responsibilities<br><br>Operate and monitor mechanical and electromechanical plant. Monitor HVAC, air-conditioning, and cooling systems. Monitor and operate BMS systems. Conduct routine plant inspections and operational checks. Identify equipment abnormalities and technical faults. Escalate maintenance requirements to technical teams. Maintain accurate operational logs and records. Coordinate with engineers, supervisors, and technicians.<br><br>Requirements<br><br>Technical qualification in Air Conditioning, Mechanical, or Electromechanical disciplines. Minimum 5 years' relevant experience.3 years' experience as a Plant Operator within schools and kindergartens. Strong knowledge of electrical, mechanical, HVAC, and cooling systems. Good knowledge of electromechanical operational requirements and BMS systems. Relevant technical certifications preferred. Strong attention to detail. Good communication skills. English required; Arabic preferred.

Job Purpose Responsible for monitoring and controlling project costs, budgets, commitments, actual expenditure, forecasts, and cost performance throughout the EPC project lifecycle. The role provides accurate cost information and early warning of potential cost overruns.<br>Key Responsibilities Monitor project budget, actual cost, commitments, accruals, and forecast against the approved cost baseline. Prepare weekly and monthly cost reports and cost variance analysis. Prepare and maintain ETC (Estimate to Complete) and EAC (Estimate at Completion). Monitor project cost performance using EVM, CPI, SPI, CV and SV. Coordinate with Planning to ensure cost and progress data are properly aligned. Maintain Cost Breakdown Structure (CBS) and cost coding. Monitor Purchase Orders, subcontracts, commitments, and invoices. Prepare and monitor monthly accruals and reconcile costs with Finance. Track variations, change orders, and their cost impact on the project. Monitor cost trends, risks, and potential budget overruns and provide early warnings. Support project cash-flow forecasting and management reporting. Coordinate with Engineering, Procurement, Construction, Contracts, Commercial, Planning, and Finance teams. Support project close-out and final cost reporting.<br>Requirements Bachelor’s degree in engineering, Quantity Surveying, Finance, Accounting, or related discipline.4–6 years of experience in Cost Control / Project Controls. EPC experience in Oil & Gas, Petrochemical, Power Plant, Industrial, Power, Digital & Infrastructure projects preferred. Good knowledge of EPC cost control, EVM, CPI/SPI, ETC/EAC, commitments, accruals, and forecasting. Strong MS Excel skills. Experience with Primavera P6, SAP, Oracle, Eco Sys, Power BI, or similar systems is an advantage. Good analytical, reporting, communication, and coordination skills.

Job Summary The Procurement Engineer is responsible for sourcing and purchasing materials, equipment, and services required for Power, Infrastructure, and Construction projects. The role works closely with Engineering, Projects, and Site teams to ensure materials are procured with the required quality, competitive cost, and on-time delivery.<br>Key Responsibilities Manage procurement of electrical, mechanical, civil, construction, and infrastructure materials and equipment. Review technical specifications, drawings, BOQs, and purchase requisitions. Source and develop qualified suppliers and manufacturers. Obtain, evaluate, and compare supplier quotations. Coordinate with Engineering and Project teams for technical approvals. Negotiate prices, payment terms, delivery schedules, and other commercial conditions. Prepare and process purchase orders in line with company procedures. Follow up with suppliers to ensure timely delivery as per project requirements. Monitor critical and long-lead materials and equipment. Coordinate with Site, Quality, Logistics, and Warehouse teams for inspection and delivery. Monitor supplier performance and resolve quality, delivery, and commercial issues. Maintain supplier and procurement records in SAP/ERP systems. Support cost-saving and value-engineering initiatives. Conduct market research for suppliers, pricing, availability, and alternative materials. Ensure procurement activities comply with company policies, project requirements, quality standards, and HSE requirements.<br>Key Skills Good knowledge of procurement for Power, Infrastructure, and Construction projects. Knowledge of electrical, mechanical, civil, and construction materials and equipment. Ability to understand technical specifications, drawings, BOQs, and project requirements. Good quotation evaluation and negotiation skills. Strong supplier management and follow-up skills. Good communication and coordination skills. Good knowledge of MS Office and Excel. SAP/ERP procurement experience is preferred.<br>Experience Minimum 8 years of total experience. Minimum 5 years of relevant procurement experience in Power, Infrastructure, Construction, EPC, Utilities, or related industries. Experience in procurement of project materials and equipment is essential. GCC experience is an advantage.<br>Education Bachelor's degree in engineering, Procurement, Supply Chain, or a related field. Professional certification in Procurement or Supply Chain is an advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><span>Monitor and manage AMI systems including Head End System (HES), Meter Data Management (MDM), and communication networks.<br></span></li><li><span>Ensure continuous and seamless communication between smart meters and central systems.<br></span></li><li><span>Identify, troubleshoot, and resolve AMI system issues related to connectivity, data flow, and performance.<br></span></li><li><span>Perform first-level diagnosis of communication failures and network performance issues.<br></span></li><li><span>Escalate complex or unresolved technical issues to higher support levels or vendors as per procedures.<br></span></li><li><span>Analyze AMI operational data and generate system performance insights and reports.<br></span></li><li><span>Coordinate with IT, metering, telecom, and field teams to ensure system reliability.<br></span></li><li><span>Support system configuration, updates, and minor enhancements under supervision.<br></span></li><li><span>Maintain system logs, incident records, and operational documentation.<br></span></li><li><span>Ensure compliance with ISO, ISMS, BCMS, and cybersecurity policies.<br></span></li><li><span>Adhere to corporate Health &amp; Safety and operational procedures.<br></span></li><li><span>Perform any other tasks assigned by the supervisor.<br></span></li></ul><br><span>Requirements</span><ul><li><span>Bachelor’s degree in Electrical Engineering, IT, or related discipline.<br></span></li><li><span>Minimum 4 years of relevant experience in AMI system monitoring, MDM/HES operations, or similar environments.<br></span></li><li><span>Proficiency in AMI systems and operational software tools.<br></span></li><li><span>Knowledge of smart metering technologies and communication protocols.<br></span></li><li><span>Strong analytical, reporting, and coordination skills.<br></span></li><li><span>Good communication and teamwork abilities.<br></span></li><li><span>Written and spoken English is essential; Arabic is preferred.<br></span></li></ul><br> </div>