وظائف محلل مالي - الدوحة قطر

<p><strong>Principal:</strong> Qatar District Cooling Company<br><strong>Country:</strong> Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).<br>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)<br>3. Tank (Structures, valves and fittings, air vents)<br>4. Air handling Units (Filter, ducting, AHU Housing)<br>5. Filtration system (Filters, housings, pipe and fittings)<br>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system<br>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

Job description:<br><br> Job Purpose Purpose of the Role: Technical role responsible for developing Data Governance controls using NOC Data Governance solutions on data repositories and Data Platform ensuring data management, quality and responsibilities are in place to improve the overall data governance maturity. Digital use cases and application solutions data governance deliverables to ensure data used and presented are accurate and trusted. Interface with all NOC business entities especially the users of production operations data to ensure data governance practices and workflows are designed and implemented on data repositories (i.e., data quality rules) to improved business decisions and increase operational efficiency. JOB DIMENSIONS Structured and unstructured data for more than 100 Data Domains, 650 Data Families and 100 Data Sources/Solutions Manage 4 solutions and work with 2 service contracts. Interface with the digital team to implement data governance on the digital use cases to ensure data used and presented is fit for decision making. Interface with the identified data roles within 16 departments, which are Data Owners (Leadership), Data Stewards (Data SMEs) and Data Custodians (Solution SMEs) to capture the data requirements and improvements on the tools. Interface with information security to ensure security controls are applied on the data used (i.e. information classification) Support maturing data knowledge and practices (i.e. end user training) Key Accountabilities Key Accountabilities Data Governance solutions management and maintenance (i.e., data quality, data cataloging, metadata management) Implement data governance practices on AI, digital use cases, data platforms and NOC solutions. Evaluate and apply data governance practices on identified key data elements and any data hosted outside of NOC premise (i.e., cloud). Review vendors’ deliverables and communicate corrective actions. Enable NOC data literacy and organization upskilling Key Accountabilities ACTIVITIES Define and implement data governance processes, practices and rules as requested by data owners and steward on data governance tools (i.e. Informatica). Work closely with the internal teams team to implement data governance on the data that will be used in AI, advanced analytics and digital use cases and map it to the enterprise data governance practices. Develop and maintain AI governance, observability, and quality assurance capabilities, including agent access controls, audit trails, compliance-driven configurations, and automated monitoring for data quality, model performance, bias, and drift, while supporting incident investigation and remediation of AI-related risks. Apply data governance requirements on Key Data Elements identified by the business. Capture and implement data governance requirements on data before migrating to cloud. Perform resource creation and extraction of core databases metadata and profiling metadata, business term association, attribute management, data domains, rules, profiling information and troubleshooting, and performance tuning in EDC. Analysis business data and propose data quality rules to the business then implement the selected/validated rules and produce data quality scorecards that are regularly updated. Work with stakeholders to identify trusted source, owner, and steward for each of the Key Data Elements (KDE) and define business definition and business rules. Manage metadata repositories through executing onboarding of technical and business metadata on data governance solutions, ensuring the population of data lineage and linkage between the technical and business metadata. Use data profiling and Informatica EDC/IDQ to discover patterns and tasks that can be automated, and identify ways to improve data reliability, performance, efficiency, and quality. Implement metadata catalog, dictionaries, business user glossaries on relative tools leverage Oil and Gas standard practices to ease the data discovery and utilization. Maintain an API and a dashboard that showcases the Data Governance maturity KPIs for every department. Implement and maintain a Data Certification tool that provides evidence of complete and accurate data migration from source to destination. Key Accountabilities Evaluate and recommend innovative solutions to mature NOC’s data operations and overall data governance. Implement enterprise metadata standards, guidelines, and processes to ensure quality metadata and support for ongoing data governance. Capture data lineage and data flow between systems, defining the transformation that data are subject to while moving between systems in accordance with App and Data IS SMEs. Build and maintain effective working relationships with key entities and stakeholders in NOC and other parties as needed. Support NOC to define new requirements, participate in end user meetings to derive and define the business requirement, propose cost effective solutions for data governance and familiarize the team with the requirements, specifications, design targets & techniques to support task performance and delivery. Review & propose industry best tools & technology for ever changing business rules and data set from data governance point of view, Conduct Proof of Concepts (POC) with new tools & technologies to derive convincing benchmarks and deliver value-based solution in Quick time. Interface with the department Architects to ensure Data governance principles and rules are considered. Launch data quality improvement actions for Key Data Elements Competencies Delegate Appropriately and Communicate Effectively Demonstrate Adaptability in Managing Complex Situations Demonstrate Learning Agility and Drive Innovation Develop Emotional Intelligence and Cultural Competence Develop Others and Institutionalise Knowledge Develop Talent for the Future NOC Sustainability Facilitate Collaboration and Sense of Community Improve Safety, Technical Proficiency and Results Lead By Example with NOC Values Set Purpose, Strategic Direction and Company Plan Strengthen Accountability and Continuous Improvement Think and Act in Stakeholder-Centric Ways Education Bachelor’s degree from an accredited university in Information Management or Computer Science or an engineering/business related equivalent. Certification Experience 10 years of experience in Data Management/Governance preferably in Oil and Gas upstream operations. 8+ years of experience in Data Governance projects using data governance tools (i.e., informatica). Deep experience in petroleum operations data and good understanding of the related data sources Full understanding of Data Governance concepts (e.g., cataloging, profiling, ownership/stewardship, Data Quality, Data Catalog ...etc.) Certification and strong technical and analytical skills, as well as hands-on experience with Informatica data governance tools (Axon, IDQ, EDC) Deep technical experience in creating data governance workflows, implement policies, guidelines, tools, metrics, and standards for managing metadata. Deep technical experience integrating Informatica EDC/IDQ with Axon. Deep technical experience in Metadata Extraction & build lineage among assets. Deep technical experience in implementing data quality rules using Informatica DQ Strong hands-on experience designing, developing, deploying, testing, and administrating Informatica data governance tools. Experience in database technologies and techniques (e.g., SQL, NoSQL, Oracle, …etc) Experience establishing master data and reference data for domain entities using Informatica MDM. Able to make quick decisions and solve technical problems to provide an efficient environment for project implementation. Awareness of data integration patterns, data modeling and data architecture Ability to work in Agile environment, and to regularly learn and adopt new technology. Ability to communicate across all levels of the organization and work with diverse project teams. Fluent English both spoken and written

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li>Install, operate, inspect, and maintain split, package, ducted, and other air-conditioning systems.<br></li><li>Perform preventive and corrective maintenance, including cleaning filters, coils, drains, and checking refrigerant levels.<br></li><li>Diagnose and repair mechanical, electrical, refrigerant, and control-system faults.<br></li><li>Maintain service records, report equipment issues, and follow applicable HSE procedures.<br></li></ul><br><span>RequirementsITI, Technical Certificate, or Diploma in HVAC / Air Conditioning / Mechanical field.<br>Minimum 2–5 years of relevant AC maintenance and repair experience.<br>Good knowledge of refrigeration cycles, compressors, condensers, evaporators, thermostats, and electrical controls.<br>Ability to troubleshoot AC systems and use standard HVAC tools and testing equipment.<br>Experience in commercial, residential, or industrial HVAC maintenance is preferred.<br>Immediate Joining<br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><span><span>Install, configure, and calibrate online flow meters and process instruments including Electromagnetic, Ultrasonic, and Air Flow Meters, Level Transmitters, and process analyzers</span><br></span></li><li><span><span>Perform preventive and corrective maintenance of instrumentation and automation systems across the plant</span><br></span></li><li><span><span>Coordinate with FS &amp; EPC project teams for installation and maintenance works; support spare parts management and equipment inquiries</span><br></span></li><li><span><span>Troubleshoot and diagnose faults in PLC/SCADA systems, VFDs, soft starters, motorized control valves, pneumatic valves, and electric valves</span><br></span></li><li><span><span>Maintain instruments maintenance history, calibration records, and submit daily job completion reports</span><br></span><br></li></ul><br><span>Requirements</span><ul><li><span><span>Diploma in Instrumentation, Electrical, or related discipline</span><br></span></li><li><span><span>Hands-on experience in plant instrumentation maintenance and calibration</span><br></span></li><li><span><span>Knowledge of OEM manuals for calibration and troubleshooting</span><br></span></li><li><span><span>Available to join </span><b><b>immediately</b></b><br></span><br></li></ul><br> </div>

<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment • Troubleshoot and diagnose electrical and mechanical faults • Plan and schedule maintenance activities using SAP systems • Conduct daily toolbox meetings and ensure HSE compliance • Act as Designated Site Representative (DSR) for contractors • Implement maintenance checklists and standard procedures • Manage equipment spare parts and inventory • Support emergency shutdowns and planned maintenance • Prepare maintenance reports and documentation • Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration • 3-5 years HVAC maintenance experience • Petrochemical/oil & gas industry experience preferred • SAP or CMMS knowledge • BOSIET, H2S, Fire Watch certifications</p>

<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment • Troubleshoot and diagnose electrical and mechanical faults • Plan and schedule maintenance activities using SAP systems • Conduct daily toolbox meetings and ensure HSE compliance • Act as Designated Site Representative (DSR) for contractors • Implement maintenance checklists and standard procedures • Manage equipment spare parts and inventory • Support emergency shutdowns and planned maintenance • Prepare maintenance reports and documentation • Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration • 3-5 years HVAC maintenance experience • Petrochemical/oil & gas industry experience preferred • SAP or CMMS knowledge • BOSIET, H2S, Fire Watch certifications</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 222857 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-09-03</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>Monitor the activities of the outsourced Operation and Maintenance (O&amp;M) Contractor at site by reviewing daily reports, calibration reports, maintenance activities/reports, and Quality Control (QC) activities performed to ensure proper operation of the stations. Ensure property and equipment are secure. Verify that the spare parts interchanged by the contractor are original and as per approved specifications. Control all operational and maintenance activities at the ambient air quality stations and ensure all control systems related to the ambient air quality networks. Review and evaluate data to detect possible abnormalities related to the functioning of the stations and report to the section for further action. Keep records of all station inventories, data, reports, logs, and certificates to ensure traceability of results generated. Maintain systems to track schedules for maintenance, calibrations, and re-certifications on a timely basis and verify compliance by the Contractor. Report HSE statistics of the Contractors on a monthly basis. During emergencies, be available 24x7 and participate in incident investigations and provide ambient air quality and meteorological data to the investigating team. In case of incidents, ensure movement of the mobile monitoring AAQM station to the incident location by obtaining proper permits and securing power supply, etc. Accompany and assist the Technical Systems and Performance Audit Contractor during scheduled audits. Conduct independent first-party internal audits to verify AAQM station performance. Make regular station visits to oversee overall station functions (e.g., AC maintenance, generator tests, pest control, and general maintenance of the stations). Raise SAP requests and coordinate with the maintenance division for overall station maintenance. Maintain and raise SAP requests for troubleshooting Air Quality Modelling Servers.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electronics / Instrumentation / Meteorology / Environmental / Science (Chemistry, Physics) or equivalent qualification. Minimum of 5 years Ambient Air Quality Monitoring-related experience, preferably directly related to the O&amp;M activities of Ambient Air Quality Stations. Possess a valid Qatar driving license. Professional certification or license from a credible meteorological, environmental, or related association/society is an advantage. Technical understanding of air quality monitoring and environmental/meteorology requirements is essential. Upper Intermediate English (QP Level 6). Proven ability to organize and perform responsibilities with minimum supervision.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 231924 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-20</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 231865 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-10</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.<br>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.<br>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels<br>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.<br>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.<br>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,<br>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.<br>Generate technical layouts and technical reports.<br>Understand and implement the basis of the Computer Maintenance Management Systems<br>Perform thermo graphic and analysis for the electrical equipment.<br>Provide assistance and guidance to other technical teams, whenever required<br>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>WE ARE HIRING – MULTIPLE POSITIONS</span><br></p><br><span><b>URGENT HIRING – Pipe Fitter / Pipe Fabricator / Structural Fabricator</b></span><br><p><b>Responsibilities:</b><br></p><br><ul><li>Perform installation, fabrication, assembly, and maintenance activities for piping systems and structural steel works as per project specifications.<br></li><li>Carry out pipe cutting, beveling, grinding, fit-up, alignment, and installation of pipes, valves, fittings, and supports.<br></li><li>Fabricate pipe spools, structural supports, platforms, beams, columns, and other steel structures as per approved drawings.<br></li><li>Read and interpret P&amp;IDs, isometric drawings, fabrication drawings, and structural drawings.<br></li><li>Perform marking, cutting, drilling, grinding, assembly, and dimensional checking activities.<br></li><li>Ensure proper alignment, leveling, fit-up, and quality of fabricated components.<br></li><li>Coordinate with welders, supervisors, QC inspectors, riggers, and other site teams.<br></li><li>Follow PTW, LOTO, PPE, and all site safety requirements during work execution.<br></li><li>Maintain good housekeeping and comply with project quality and HSE standard<br></li></ul><br><span>Requirements</span><p><b>Requirements:</b><br></p><br><ul><li>ITI / Diploma / Technical qualification in Mechanical, Fabrication, or related trade.<br></li><li>Minimum 3–5 years of relevant experience in Oil &amp; Gas, Petrochemical, Refinery, or Industrial projects.<br></li><li>Hands-on experience in pipe fitting, pipe spool fabrication, and structural steel fabrication works.<br></li><li>Ability to read and understand piping isometric drawings, P&amp;IDs, and fabrication drawings.<br></li><li>Knowledge of pipe materials, fittings, valves, supports, and structural steel components.<br></li><li>Experience in carbon steel, stainless steel, and alloy piping systems is preferred.<br></li><li>Good knowledge of site safety practices and industrial work procedures.<br></li><li>Immediate joiners preferred.<br></li></ul><br> </div>

Financial Systems & Accounting Expert<br><br>Role Type: Contractor<br><br>Location: Remote, Worldwide<br><br>Schedule: Flexible<br><br>Role Overview<br><br>micro1 is engaging Financial Systems & Accounting Experts to support a customer project focused on accounting operations, financial reporting, and ERP systems. You'll apply your accounting judgment and financial systems expertise to evaluate and improve AI-generated outputs and training data.<br><br>Prior experience in AI training or human-data work is required. Simply using AI features within accounting software does not qualify.<br><br>Scope of Work<br><br>Evaluate AI-generated accounting outputs for accuracy, calculations, journal entries, and accounting treatments. Review and annotate financial statements, reconciliations, journal entries, and month-end close workpapers. Identify accounting errors, misstatements, and inconsistencies and provide appropriate corrections with clear rationale. Assess accounting workflows and financial systems logic across platforms such as Net Suite, SAP, Oracle, Quick Books, Xero, and Dynamics 365. Apply written rubrics to evaluate, rank, and grade AI-generated responses. Create realistic accounting scenarios, examples, and reference answers for AI training. Provide clear, actionable feedback to improve model performance and accounting accuracy. Support financial processes from transaction recording through month-end close and financial reporting.<br><br><br>Required Skills<br><br>Accounting Financial Reporting Financial Systems Net Suite GSAPQuick Books Microsoft Excel Account Reconciliations Journal Entries & Month-End Close AI Training / Human Data Evaluation<br><br><br>Preferred Qualifications<br><br>3+ years of hands-on experience in financial accounting, corporate accounting, audit, bookkeeping, financial reporting, management accounting, cost accounting, or FP&A with substantial accounting responsibilities. Proven experience preparing or reviewing journal entries, reconciliations, and financial statements. Hands-on experience with Net Suite, SAP, Oracle, Quick Books, Xero, Sage Intacct, Dynamics 365, Workday, or comparable financial systems. Strong proficiency in Microsoft Excel. Familiarity with tools such as BlackLine, Bill.com, Ramp, Brex, Stripe, Avalara, Anaplan, Tableau, or Power BI is a plus. Prior paid experience in AI training, data annotation, labeling, RLHF, AI response evaluation, model evaluation, or rubric-based grading is required. Strong written and verbal English communication skills (B2 level or above). Ability to work independently and meet project quality standards and deadlines. Reliable internet connection and immediate availability.

<strong>Key Responsibilities</strong> <p></p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> </p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p> <p> </p> <p> <strong>Commissioning Experience</strong> </p> <p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> <strong>Inspection:</strong> <strong> </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p> <p> <strong>Commissioning:</strong> <strong> </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p> <p> <strong>Troubleshooting:</strong> <strong> </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p> <p> <strong>Repair &amp; Maintenance:</strong> <strong> </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p> <p> <strong>Overhauling:</strong> <strong> </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p> <p> <strong>Piping Systems:</strong> <strong> </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 260000AH <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Customer Service <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-18</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>Electrical Engineer responsible for reviewing technical specifications, schematics, and automation documents, preparing protection diagrams, validating transformer applications, and ensuring system integration. The role also involves vendor/tender evaluation, client collaboration, factory acceptance testing, and supporting sales/margin optimization through engineering efficiency.</p><p>Your role</p><ul><li>Specification Study: Conduct detailed studies of project specifications to ensure alignment with client requirements and technical standards.</li><li>Control &amp; Protection Schematic Review: Review control and protection schematic drawings from partner units to ensure accuracy and functionality.</li><li>SAS Document Review: Analyze System Automation Schematics (SAS) documents, including Functional Design Specifications, SAS Architecture, GTP, and BOQ.</li><li>Substation Equipment Review: Evaluate primary and secondary substation switchgear/equipment schematics, focusing on coordination with protection schematics.</li><li>Protection SLD Preparation: Prepare Single Line Diagrams (SLD) for protection systems, ensuring compliance with client specifications.</li><li>CT/CVT/PT Application Checks: Perform application checks and calculations for Current Transformers (CT), Capacitor Voltage Transformers (CVT), and Potential Transformers (PT) with respect to protective relays and protection functions.</li><li>Cable Philosophy &amp; Interconnection Schedules: Develop and review cable philosophies and interconnection schedules to ensure system integration.</li><li>Tender &amp; Vendor Review: Review tender/vendor offers related to Control &amp; Relay (C&amp;R) panels to ensure technical compatibility and cost-efficiency.</li><li>Client Interaction: Collaborate with clients for the approval of engineering drawings and documents.</li><li>Sales &amp; Margin Optimization: Achieve sales targets and improve gross margins through effective engineering optimization.</li><li>Factory Acceptance Testing (FAT): Conduct Factory Acceptance Testing (FAT) for electrical equipment such as transformers, current transformers, and voltage transformers to ensure product quality and performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering or related field.</p><p>5+ years of experience in electrical engineering, particularly in protection systems and substation design.</p><p>Proficient in reviewing control and protection schematics and technical documents.</p><p>Knowledge of SAS systems, CT, CVT, PT applications, and relay protection functions.</p><p>Strong attention to detail and problem-solving skills.</p><p>Experience with client discussions and document approvals.</p><p>Experience in factory acceptance testing and vendor offer evaluation.</p><p>Ability to work collaboratively in a team and manage deadlines effectively.</p>

<ul><li>Operate and maintain work-class ROV systems during offshore operations.</li><li>Assist in pipeline inspection, subsea structure surveys, and asset integrity checks.</li><li>Support mobilization and demobilization of ROV equipment.</li><li>Perform routine maintenance, troubleshooting, and minor repairs on ROV systems.</li><li>Follow HSE guidelines and IMCA standards during all operations.</li><li>Prepare basic daily logs, inspection notes, and operational reports.</li><li>Coordinate with the ROV Supervisor and offshore team for daily tasks.</li><li>Monitor ROV performance and report any technical issues promptly.</li><li>Assist in spare parts inventory and equipment checks.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Familiarity with work-class ROV systems and subsea tooling.</li><li>Basic understanding of IMCA guidelines and offshore safety standards.</li><li>Good communication and teamwork skills.</li><li>Willingness to work offshore on rotational basis.</li></ul>