فنى كابلات منخفض الفولت - الدوحة قطر

<p>? Experience in the design and supervision of the installation of Infrastructure dry utilities ? Experience in working with Primary & Distribution Substations 22kv (From design stage to handing over stage) ? Experience in working on MV networks conceptual design (Single Line) & Protection Schemes ? Experience in the testing & commissioning of all electrical system components/equipment ? Ability to resolve technical issues and clashes during the design development process with other stakeholders. ? Experience in dealing with authorities for cases involving departure from standards (i.e. sub-standard design). ? Review and recommend samples, Design Details, Work Procedure, Method Statements, Schedules, Programs etc. ? Experience with High voltage & extra High voltage networks ? Specialized in the design of LV & MV schemes ? Familiar with Qatar Transmission Grid Code and its requirements ? Familiar with Kahramaa rules and regulations and their internal processes with hands on experience in coordinating with Kahramaa stakeholders on technical matters for approvals. ? Experience in planning, designing and optimizing electrical requirements of plot subdivisions in line with local codes & standards ? Familiar with relevant software for design of dry utilities</p><p>Qualification, Technical Skills and Competencies required to Execute this Role ? Engineering Graduate preferably with a Master’s degree in a specific Utility. ? Chartered Professional Engineering certification or equivalent is preferred ? MME Registered Engineer – Grade A ? Knowledge of construction supervision services ? Understanding of international engineering standards and codes ? Good interpersonal and leadership skills ? Strong communication skills ? Good planning and organization skills ? Strong attention to details ? Strong time management skills ? Proficiency in spoken and written Arabic and English Experience Required to Execute this Role ? 20+ years of International experience of which 10+ in Qatar in major infrastructure planning and design works with site construction experience. ? Experience within the Middle East</p>

<p>Electrical Engineer responsible for reviewing technical specifications, schematics, and automation documents, preparing protection diagrams, validating transformer applications, and ensuring system integration. The role also involves vendor/tender evaluation, client collaboration, factory acceptance testing, and supporting sales/margin optimization through engineering efficiency.</p><p>Your role</p><ul><li>Specification Study: Conduct detailed studies of project specifications to ensure alignment with client requirements and technical standards.</li><li>Control &amp; Protection Schematic Review: Review control and protection schematic drawings from partner units to ensure accuracy and functionality.</li><li>SAS Document Review: Analyze System Automation Schematics (SAS) documents, including Functional Design Specifications, SAS Architecture, GTP, and BOQ.</li><li>Substation Equipment Review: Evaluate primary and secondary substation switchgear/equipment schematics, focusing on coordination with protection schematics.</li><li>Protection SLD Preparation: Prepare Single Line Diagrams (SLD) for protection systems, ensuring compliance with client specifications.</li><li>CT/CVT/PT Application Checks: Perform application checks and calculations for Current Transformers (CT), Capacitor Voltage Transformers (CVT), and Potential Transformers (PT) with respect to protective relays and protection functions.</li><li>Cable Philosophy &amp; Interconnection Schedules: Develop and review cable philosophies and interconnection schedules to ensure system integration.</li><li>Tender &amp; Vendor Review: Review tender/vendor offers related to Control &amp; Relay (C&amp;R) panels to ensure technical compatibility and cost-efficiency.</li><li>Client Interaction: Collaborate with clients for the approval of engineering drawings and documents.</li><li>Sales &amp; Margin Optimization: Achieve sales targets and improve gross margins through effective engineering optimization.</li><li>Factory Acceptance Testing (FAT): Conduct Factory Acceptance Testing (FAT) for electrical equipment such as transformers, current transformers, and voltage transformers to ensure product quality and performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering or related field.</p><p>5+ years of experience in electrical engineering, particularly in protection systems and substation design.</p><p>Proficient in reviewing control and protection schematics and technical documents.</p><p>Knowledge of SAS systems, CT, CVT, PT applications, and relay protection functions.</p><p>Strong attention to detail and problem-solving skills.</p><p>Experience with client discussions and document approvals.</p><p>Experience in factory acceptance testing and vendor offer evaluation.</p><p>Ability to work collaboratively in a team and manage deadlines effectively.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job SW-1202-2 - Engineering Lead (Electrical – Power Supply) <p>Qualifications*</p><br><p>Bachelor Degree in Electrical Engineering</p><br> <p>Knowledge and/or Experience*</p><br><p> 8 years experience in Piping Engineering roles, including 4 years in the Oil &amp; Gas Industry, and including 1 year's experience in a supervisory or acting role, or oversight of contractor/subcontractors/service/vendor personnel.</p><br><p> Preferable experience in a major LNG Project.</p><br><p>Broad knowledge of engineering execution including design standards, specifications, codes, safety criteria, onshore LNG facilities and utility systems design, construction and operations.</p><br><p>Requires demonstrated broad Electrical equipment and systems experience (HV/MV/LV electrical systems design, transformers, switchgear, power management systems, electrical system controls for reactive and active power sharing, power distribution control, large Motors, 40MW+) and familiarity with relevant manufacturing processes and relevant industry codes.</p><br><p>High voltage and large-scale onshore power design requirements.</p><br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Job Description Inside/Outside Cable Plant Technician IITransform technology into opportunity as an Inside/Outside Cable Plant Technician II with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you ll be at the forefront of innovation and play a meaningful part in improving how agencies operate.At GDIT, people are our differentiator. As an Inside/Outside Cable Plant Technician II you will help ensure today is safe and tomorrow is smarter. Our work depends on I/O CPT II joining our team to perform installation, maintenance, and repair of telecommunications systemsHOW A Inside/Outside Cable Plant Technician II WILL MAKE AN IMPACT Performs installation, maintenance and repair of telecommunications systems. Leverage a Lead level of experience to perform inside/outside cable plant work.WHAT YOU LL NEED TO SUCCEED: Education: AA/AS Required Experience: 3+ years of related experience Required Technical Skills: Installation of ducts and conduits, pulling cables, and terminating, testing, splicing, and repairing interior and outside copper, coaxial, and fiber optic cabling Installation of fiber optic modems, fiber multiplex equipment, fiber patch panels, analog and digital copper patch panels, main and intermediate distribution frames, Installation of lightning protection and supporting ground and power connections Installation of cabinets, cable ladder and rack systems, and equipment components in the cabinets Security Clearance Level: SECRET Required Skills and Abilities: Experience with the operation of heavy equipment as specified in the task order to include: track excavator-changeable scoop/hydraulic jackhammer, standard backhoe, bobcat, cable reel truck, and 20K all- terrain forklift Location: On Customer Site US Citizenship Required GENERAL EXPERIENCE:Must have intermediate level of experience in the following inside/outside cable plant work: Installation of ducts and conduits, pulling cables, and terminating, testing, splicing, and repairing interior and outside copper, coaxial, and fiber optic cabling Installation of fiber optic modems, fiber multiplex equipment, fiber patch panels, analog and digital copper patch panels, main and intermediate distribution frames, Installation of lightning protection and supporting ground and power connections Installation of cabinets, cable ladder and rack systems, and equipment components in the cabinetsSPECIALIZED EXPERIENCE:Experience with the operation of heavy equipment as specified in the task order to include: track excavator-changeable scoop/hydraulic jackhammer, standard backhoe, bobcat, cable reel truck, and 20K all- terrain forklift.GDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from #DefenseOCONUS</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Senior Mechanical Engineer - Umbilical &amp; Power Cable</strong><br> <strong>Position Overview</strong><br> We are seeking an experienced <strong>Senior Mechanical Engineer - Umbilical &amp; Power Cable</strong> to support the design, engineering, procurement, installation, testing, and commissioning of subsea umbilical and power cable systems for offshore oil and gas projects. The successful candidate will provide technical leadership, manage contractor and vendor interfaces, and ensure compliance with applicable industry standards and project requirements.<br> <strong>Key Responsibilities</strong><ul><li>Lead the design and engineering activities for subsea umbilical and power cable systems throughout project execution.</li><li>Provide technical oversight for Engineering, Procurement, Installation, and Commissioning (EPIC) contractors and vendors.</li><li>Review and approve engineering deliverables, technical documents, specifications, calculations, reports, and drawings related to umbilicals and power cables.</li><li>Ensure compliance with relevant industry codes, standards, and project specifications, including ISO, API, and recognized industry guidelines.</li><li>Manage umbilical and power cable package delivery, ensuring adherence to quality, safety, schedule, and cost objectives.</li><li>Evaluate and provide recommendations regarding technical queries, deviations, concessions, and change requests.</li><li>Support multidisciplinary coordination and resolve technical interfaces with internal and external stakeholders.</li><li>Review manufacturing, testing, inspection, and qualification activities for subsea umbilicals and power cables.</li><li>Participate in factory acceptance tests (FAT), system integration testing, and quality surveillance activities.</li><li>Provide technical support during loadout, transportation, installation, and commissioning activities.</li><li>Review and assess installation procedures, engineering analyses, and offshore execution plans.</li><li>Support risk assessments, technical workshops, and project design reviews.</li></ul><strong>Required Experience &amp; Qualifications</strong><ul><li>Bachelor's or Master's degree in Mechanical Engineering or a related engineering discipline.</li><li>Minimum <strong>12 years of relevant post-graduate experience</strong> in the Oil &amp; Gas industry.</li><li>Minimum <strong>10 years of experience</strong> in subsea umbilical and power cable design and engineering.</li><li>Demonstrated expertise in subsea umbilical system design and engineering.</li><li>Experience in at least <strong>two major offshore EPIC projects</strong> with direct responsibility for subsea umbilical and/or power cable package delivery.</li><li>Experience working within Project Management Team (PMT) and/or Project Management Consultancy (PMC) environments.</li><li>Strong knowledge of subsea engineering standards, codes, and specifications, including ISO and API requirements.</li><li>Extensive experience in umbilical manufacturing, qualification, testing, inspection, and quality assurance processes.</li><li>Proven ability to assess technical deviations and recommend appropriate solutions.</li><li>Strong stakeholder management, communication, and problem-solving capabilities.</li></ul><strong>Preferred Experience</strong><ul><li>Previous experience working for a subsea umbilical or cable manufacturer.</li><li>Experience with subsea umbilical crossing design, loadout operations, installation activities, and J-tube pulling operations.</li><li>Experience with power cable crossing design, loadout, installation, shore approach engineering, and shore pull analysis.</li><li>Experience in subsea umbilical and power cable pre-commissioning and commissioning activities.</li><li>Familiarity with offshore installation methodologies and subsea operations.</li></ul><strong>Key Competencies</strong><ul><li>Technical leadership</li><li>Contractor and vendor management</li><li>Engineering review and approval</li><li>Risk assessment and problem-solving</li><li>Quality and safety compliance</li><li>Cross-functional collaboration</li><li>Project execution and delivery focus</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Hiring: Engineering Lead (Electrical – Power Supply) | Doha, Qatar</strong><br>Join a major LNG megaproject in Qatar and play a key role in leading Electrical Engineering activities across design, procurement, installation, pre-commissioning, commissioning, and start-up phases.<br> <strong>Location:</strong> Doha - Ras Laffan, Qatar<br> <strong>Contract Type:</strong> Long-Term Contract<br> ️ <strong>Work Schedule:</strong> 100% Onshore<br> <strong>Rotation:</strong> 12 Weeks ON / 2 Weeks OFF<br> <strong>Working Days:</strong> 6 Days per Week<br> ⏰ <strong>Working Hours:</strong> 8-10 Hours per Day<br> Job Purpose The Engineering Lead (Electrical – Power Supply) will be responsible for overseeing all Electrical Engineering activities related to a major LNG project, ensuring full compliance with project specifications, industry standards, and company requirements.<br> The role will provide technical leadership to EPC contractors, vendors, subcontractors, and stakeholders while ensuring safe and efficient delivery of large-scale power generation and distribution systems throughout the project lifecycle.<br> Key Responsibilities <br>✅ Lead and oversee Electrical Engineering design, procurement, installation, testing, commissioning, and start-up activities.<br> ✅ Ensure compliance with project specifications, standards, regulations, and technical requirements.<br> ✅ Provide technical guidance and support to EPC contractors, vendors, and subcontractors.<br> ✅ Review and evaluate electrical simulations, power system studies, and optimization activities.<br> ✅ Support design and integration of:<br><ul><li>HV/MV/LV Electrical Systems</li><li>Power Generation Systems</li><li>Power Management Systems (PMS)</li><li>Electrical Integrated Control Systems (ELICS)</li><li>Transformers</li><li>Switchgear</li><li>Large Motors (40MW+)</li><li>VFD Systems</li></ul>✅ Review electrical equipment purchase orders and vendor documentation.<br> ✅ Monitor project progress and electrical engineering deliverables to ensure milestones are achieved.<br> ✅ Assess technical risks and provide solutions to complex electrical engineering challenges.<br> ✅ Support construction, pre-commissioning, commissioning, start-up, and performance testing activities.<br> ✅ Coordinate electrical interfaces with external stakeholders including utilities, licensors, and power suppliers.<br> ✅ Develop and update electrical engineering philosophies, specifications, standards, and procedures.<br> ✅ Participate in change management reviews and recommend recovery plans when required.<br> Qualifications <br> Bachelor's Degree in Electrical Engineering<br> Experience Required <br>✔ Minimum 8 years of Electrical Engineering experience<br> ✔ Minimum 4 years of experience within the Oil &amp; Gas industry<br> ✔ Minimum 1 year in a supervisory, acting leadership, or contractor oversight role<br> ✔ Experience supporting EPC projects<br> ✔ Preferred experience on major LNG projects<br> ✔ Experience with large-scale industrial power systems and high-voltage networks<br> Technical Requirements <br>✔ HV/MV/LV Power Distribution Systems<br> ✔ Power Generation &amp; Distribution Systems<br> ✔ Combined Cycle Power Generation<br> ✔ Power Management Systems (PMS)<br> ✔ Electrical Integrated Control Systems (ELICS)<br> ✔ Large Motors (40MW+)<br> ✔ Variable Frequency Drives (VFD)<br> ✔ Transformers &amp; High Voltage Switchgear<br> ✔ Electrical Load Flow &amp; System Studies<br> ✔ Electrical Protection &amp; Control Systems<br> ✔ Onshore LNG Facilities &amp; Utility Systems<br> ✔ Familiarity with international Electrical Codes &amp; Standards<br> Required Skills <br>✔ Excellent English communication skills<br> ✔ Strong stakeholder management capabilities<br> ✔ Strong planning and coordination skills<br> ✔ Leadership and team management abilities<br> ✔ Technical problem-solving and decision-making skills<br> ✔ Proficiency in Microsoft Office Suite<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Responsibilities<br></span><ul><li><p><span>Perform fusion and mechanical splicing of fiber optic cables.</span><br></p><br></li><li><p><span>Strip, clean, and prepare fiber/copper cables for splicing.</span><br></p><br></li><li><p><span>Use OTDR, power meters, and other tools to test and verify signal integrity.</span><br></p><br></li><li><p><span>Maintain splicing records, test results, and as-built diagrams.</span><br></p><br></li><li><p><span>Follow industry safety standards when handling cables and equipment.</span><br></p><br></li><li><p><span>Work in outdoor environments, manholes, and telecom cabinets to splice and connect cables.</span><br></p><br></li><li><p><span>Perform splicing and testing of submarine composite cable, LSZH, armored cable, loose tube cable using Fusion splicing machine, Ribbon splicing machine.</span><br></p><br></li><li><p><span>Familiar with fiber optics tools and equipment's OTDR, Source/Power meter VFL, Talk Set.</span><br></p><br></li></ul><br><span>RequirementsRequirements<br></span><ul><li><p><span>Diploma/Certificate in Telecommunications, Electronics, or related field.</span><br></p><br></li><li><p><span>Proven experience in <b>fiber optic splicing</b> and <b>copper cable splicing</b>.</span><br></p><br></li><li><p><span>Knowledge of <b>network layouts, color codes, and cable management systems</b>.</span><br></p><br></li><li><p><span>Ability to read and interpret technical drawings and splice diagrams.</span><br></p><br></li><li><p><span>Familiarity with <b>OTDR testing, light source, and power meter usage</b>.</span><br></p><br></li></ul>Interested candidates can send their CV &amp; CERTIFICATES<br><br>Contact: +974 3117 1747<br><br>Email: kisivuli@madre-me.com | resumes@madre-me.zohorecruitmail.com<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property &amp; buildings, and transportation sectors.</p><br><p><strong>About the Role</strong></p><br><p>We are looking for a HV Electrical Engineer – Primary Substations to work under the Construction Phase Services Business Group in Qatar, providing project management, design review, construction supervision, technical assessment, testing and commissioning support for high-voltage primary substations, in addition to the required building electrical services and associated power infrastructure works.</p><br><p>The HV Electrical Engineer will assist the Project Manager, Resident Engineer and/or Engineering Manager in administering the technical and operational functions of the project. The role will be responsible for the HV primary substation scope apart from building electrical services, including review of design, review of contractor and vendor submissions, coordination with service lines and stakeholders, supervision of electrical works, and ensuring compliance with approved drawings, specifications, contract requirements, utility authority requirements, and relevant international standards.</p><br><p>The HV Electrical Engineer will provide technical leadership for HV primary substation systems, including GIS/AIS switchgear, power transformers, HV cables, protection and control, SCADA/SAS, earthing, lightning protection, power system studies, and interfaces with the building electrical services. The role will also support coordination with civil, structural, mechanical, telecom, utility, vendor and commissioning teams through design, construction, testing, energization and handover.</p><br><p><strong>Roles &amp; Responsibilities</strong></p><br><ul><li>Take lead responsibility for HV primary substation works apart from building electrical services, ensuring proper technical review, site coordination, contractor management, testing, commissioning and authority/interface closeout.</li><li>Assist the PM, RE and/or Engineering Manager in performing contractual and technical duties related to HV primary substations, building electrical services interfaces, and associated power infrastructure works.</li><li>Lead and coordinate the technical review of electrical design submissions, calculations, drawings, specifications, method statements, ITPs, shop drawings, material submittals, RFIs and technical queries.</li><li>Review and verify Single Line Diagrams, protection and control schematics, equipment layouts, cable routing, earthing layouts, lightning protection layouts, interlocking schemes and SCADA/SAS interface documents.</li><li>Review and assess contractor and vendor submissions for GIS/AIS switchgear, power transformers, shunt reactors, HV cables, control and relay panels, numerical relays, RTU/SCADA systems and substation automation systems.</li><li>Review, coordinate and provide technical comments on power system studies, including load flow, short circuit, insulation coordination, dynamic motor starting, transient/dynamic analysis, harmonic analysis, arc flash, EMC/EMI, lightning, earthing and protection coordination studies.</li><li>Monitor construction activities at site and verify that electrical works are carried out in accordance with approved drawings, specifications, contract requirements, quality requirements and safety procedures.</li><li>Coordinate electrical interfaces with civil/structural works, equipment foundations, trenches, cable ducts, building services, telecom systems, utility tie-ins, energization requirements and third-party/vendor packages.</li><li>Witness and review Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), pre-commissioning tests, commissioning procedures, test reports and energization readiness documentation.</li><li>Support protection relay testing, SCADA/SAS integration, IEC 61850 coordination, functional testing, interlocking verification and utility authority inspection requirements.</li><li>Identify, document and follow up technical non-conformances, design gaps, construction issues, interface risks and quality observations until satisfactory closeout.</li><li>Participate in technical meetings, design review workshops, progress meetings, risk reviews and coordination meetings with client, contractors, service lines, vendors and utility authorities.</li><li>Provide technical input for project planning, resource estimation, delivery support, vendor partner engagement and assessment of required expertise based on the awarded proposal and project delivery requirements.</li><li>Ensure compliance with health, safety, environmental, quality and authority requirements during design review, site supervision, testing, commissioning and energization activities.</li><li>Perform other responsibilities associated with this position as may be appropriate.</li><li>Over-Voltage and Insulation Coordination Study</li><li>Load Flow Study</li><li>Dynamic Motor Starting Study</li><li>Shunt Reactor Sizing Study</li><li>Short Circuit Study</li><li>Transient and Dynamic Analysis Study</li><li>Harmonic Analysis Study</li><li>Arc Flash Study</li><li>EMC and EMI Study</li><li>Lightning Study</li><li>Earthing System Study, including step and touch potential assessment</li><li>Protection Coordination Study, including relay setting review and selectivity assessment</li></ul><p><strong>Power System Studies / Engineering Activities</strong></p><br><p><strong>Experience &amp; Qualifications</strong></p><br><ul><li><p>Bachelor’s Degree in Electrical Engineering or equivalent; Master’s Degree in Power Systems Engineering is preferred.</p><br></li><li><p>Minimum 14+ years of overall electrical engineering experience, with significant experience in HV primary substations and transmission/distribution infrastructure projects.</p><br></li><li><p>Proven experience in 132kV, 220kV and/or 400kV substations, including GIS/AIS systems, power transformers, HV cables, protection and control, SCADA/SAS, earthing and lightning protection systems.</p><br></li><li><p>Experience working with Consultants, PMC/CM teams, EPC Contractors, utility authorities and vendor partners on design review, construction supervision, testing, commissioning and energization activities.</p><br></li><li><p>Strong understanding of IEC, IEEE, BS EN and relevant local utility requirements, including experience with Kahramaa and/or other GCC utilities such as SEC, DEWA, TRANSCO, TAQA or OETC.</p><br></li><li><p>Demonstrated ability to review power system studies and technical calculations prepared using ETAP, DIgSILENT PowerFactory, PSCAD, EMTP, CYME or equivalent software.</p><br></li><li><p>Good knowledge of IEC 61850, substation automation, numerical protection relays, relay coordination, RTU/SCADA interfaces and communication systems.</p><br></li><li><p>Experience in FAT/SAT witnessing, commissioning support, test report review, punch list closeout, energization readiness and handover documentation.</p><br></li><li><p>Ability to manage multiple contractors, coordinate multidisciplinary interfaces, resolve technical issues and provide clear recommendations in a PMC/CM environment.</p><br></li><li><p>Strong analytical, communication, report-writing and leadership skills, with the ability to work effectively with client, contractor, service line, delivery and technical services teams.</p><br></li><li><p>Familiarity with BIM/Revit, ACC/Forma Construction, ProjectWise or other digital delivery and document control platforms is preferred.</p><br></li><li><p>Professional certifications such as PMP, Chartered/Professional Engineer status, IEC 61850 training, HV switching authorization, NEBOSH/IOSH or commissioning certifications are preferred.</p><br></li></ul><p><strong>Why Join Us?</strong></p><br><ul><li>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions.</li><li>Join a team that values knowledge-sharing, mentorship, and professional excellence.</li></ul><p><strong>Our Pledge to You</strong></p><br><p>At GHD, we don’t just believe in the power of commitment, we live and breathe it every day.</p><br><p>That’s why we pledge to empower our people to make a positive impact. Combining our deep technical expertise with the capabilities of our clients and partners, we respond to some of the most complex challenges facing our planet today.&nbsp;</p><br><p>See where your commitment could take you.</p><br><p>That’s the&nbsp;<strong>#PowerOfCommitment</strong></p><br><br> </div>

<p>Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required. Carry out daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications. Handle all aspects of Electrical/Instrument Construction activities including site investigations, site surveys and etc. Supervise and manage installation Earthing and Lightning Protection works. Supervise installation of Lighting and Small Power works. Manage and supervise cable tray installation and Fire Alarm System cable laying and termination works. Co-ordination of finalizing Cable entries, cable routes, cable diversions etc. Manage and supervise cable tray installation and Instrument Control &amp; Power Cable laying and termination works. Supervise Fiber Optic cable installation and splicing works. Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels. Supervise installation of Control junction boxes and Panels. Good knowledge in reading and understanding Equipment Layout drawings. Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc. Cable termination and Loop checking. Co-ordinate pre-commissioning activities and assist during commissioning of facilities. Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates. Witness SAT pre commissioning activities for equipment. Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits. Participate in development of as-built drawings/documentation. Prepare Punch list for finished work prior to handing over to Company by contractor by paying special attention to all EHV equipment including Quality checks. Works closely with other Company Construction Supervisors (Mech / Elec). Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendations for improvement. Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site. Liaise and report with the QC Inspector on quality related matters. Liaise with the HSE Supervisor on safety related matters. Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs). Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer. Review contractors' construction plans and schedules including method statements and JSAs.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</p><p>Good skills in construction management, effective communication, conflict resolution. Relevant courses in HSE, QAQC and construction.</p><p>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</p><p>Extensive experience in large scale solar (Photovoltaic) Projects.</p><p>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers) &amp; SCADA (Supervisory Control and Data Acquisition).</p><p>This includes understanding safety standards, hazardous area classifications, and compliance with relevant codes and regulations.</p><p>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</p><p>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>To work as a Instrument Technicians.</p><p>Knowledge &amp; Qualification:</p><p>Install and Dismantle Equipment.</p><p>Maintain Equipment.</p><p>Role &amp; Responsibilities:</p><p>Cable tray /p-tray</p><p>Connection &amp; cable pulling</p><p>Hook up</p><p>Calibration</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Install and Dismantle Equipment. Maintain Equipment.</p><p></p></section>

The ELV Design Engineer will be responsible for end-to-end design and engineering of Extra Low Voltage (ELV) systems for building and infrastructure projects. The role involves collaborating with clients, architects, and project teams to understand requirements, developing detailed ELV designs and drawings, ensuring compliance with international and local standards, and providing technical support during installation and commissioning.<br>Duties and Responsibilities: ELV Design Engineer <br>1) Collaborate with clients, architects, and project managers to understand project requirements and objectives.2) Design Extra Low Voltage (ELV) systems, including but not limited to:a. Structured Cabling Systems (SCS)b. Data Networksc. Voice Networksd. Security Systems (CCTV, Access Control, Intrusion Detection)e. Audio-Visual Systemsf. Public Address (PA) Systemsg. Building Automation Systems (BAS)h. Fire Alarm Systems3) Develop detailed design drawings, schematics, and specifications using CAD software (e.g., Auto CAD).4) Perform site surveys and assessments to gather necessary information for design and implementation.5) Conduct technical feasibility studies and risk assessments to ensure the viability and effectiveness of proposed solutions.6) Ensure compliance with relevant industry standards, codes, and regulations (e.g., ANSI/TIA/EIA, BICSI, NFPA).7) Work closely with internal teams and external vendors to select appropriate equipment, materials, and technologies for ELV systems.8) Provide technical support and guidance to installation and commissioning teams during the implementation phase.9) Review and evaluate system performance, troubleshoot issues, and propose corrective actions as needed.10) Stay updated on emerging technologies, industry trends, and best practices in ELV system design and integration.<br>Experience: 7–9 years in ELV / Low Current systems design and engineering, preferably in a system integrator / contracting environment.<br>Qualifications Bachelor’s degree in Engineering (B. E./B. Tech) in one of the following:Electronics & Communication / Telecommunications Electrical & Electronics Professional certifications (preferred/added advantage):BICSI (e.g., RCDDVendor certifications in CCTV/Access Control, Fire Alarm, or Building Management Systems Auto CAD / BIM-related certifications

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Supervise the EPIC Contractors during the execution of construction activities at construction sites.</li> <li>Participate in reviewing detailed design drawings, method statements, material requisitions, and etc.</li> <li>Co-ordinate mobilization and de-mobilization of contractors on site.</li> </ul><br><p>* Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required.* Carry out daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.<br>* Handle all aspects of Electrical/Instrument Construction activities including site investigations, site surveys and etc.* Supervise and manage installation Earthing and Lightning Protection works.<br>* Supervise installation of Lighting and Small Power works. Manage and supervise cable tray installation and Fire Alarm System cable laying and termination works.* Co-ordination of finalizing Cable entries, cable routes, cable diversions etc.<br>* Manage and supervise cable tray installation and Instrument Control &amp; Power Cable laying and termination works.* Supervise Fiber Optic cable installation and splicing works.<br>* Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels.* Supervise installation of Control junction boxes and Panels.<br>* Good knowledge in reading and understanding Equipment Layout drawings.* Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc.<br>* Cable termination and Loop checking.* Co-ordinate pre-commissioning activities and assist during commissioning of facilities.<br>* Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates.* Witness SAT pre commissioning activities for equipment.<br>* Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.* Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits.<br>* Participate in development of as-built drawings/documentation.* Prepare Punch list for finished work prior to handing over to Company by contractor by paying special attention to all EHV equipment including Quality checks.<br>* Works closely with other Company Construction Supervisors (Mech / Elec).* Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendations for improvement.<br>* Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site.* Liaise and report with the QC Inspector on quality related matters.<br>* Liaise with the HSE Supervisor on safety related matters.* Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs).<br>* Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer.* Review contractors' construction plans and schedules including method statements and JSAs.</p><br><br><ul> <li>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</li> <li>Good skills in construction management, effective communication, conflict resolution. Relevant courses in HSE, QAQC and construction.</li> <li>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) Projects.</li> <li>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers) &amp; SCADA (Supervisory Control and Data Acquisition).</li> <li>This includes understanding safety standards, hazardous area classifications, and compliance with relevant codes and regulations.</li> <li>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</li> <li>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>NETWORK TECHNICIAN</span><br><span>Responsibilities</span><br></span><ul><li><span>Install, configure, maintain, and troubleshoot LAN, WAN, Wi-Fi, and related network infrastructure.</span><br></li><li><span>Install and support switches, routers, firewalls, access points, servers, and network-connected devices.</span><br></li><li><span>Perform structured cabling, patch-panel termination, rack installation, labelling, and cable testing.</span><br></li><li><span>Monitor network availability and performance and resolve connectivity issues.</span><br></li><li><span>Configure IP addresses, VLANs, VPNs, routing, switching, DNS, and DHCP services.</span><br></li><li><span>Diagnose hardware, software, cabling, and network-performance problems.</span><br></li><li><span>Perform preventive maintenance and replace defective network components.</span><br></li><li><span>Maintain network diagrams, device inventories, configuration records, and service reports.</span><br></li><li><span>Support users with network access, internet connectivity, IP phones, printers, and related IT equipment.</span><br></li><li><span>Follow cybersecurity controls, change-management procedures, and site safety requirements</span><br></li></ul><br><span>Requirements<span>Requirements</span><br></span><ul><li><span>Diploma or bachelor’s degree in Information Technology, Computer Science, Electronics, or a related field.</span><br></li><li><span>Minimum 5–10 years of relevant experience in network installation, maintenance, and troubleshooting.</span><br></li><li><span>Strong knowledge of LAN, WAN, TCP/IP, DNS, DHCP, VLAN, VPN, routing, switching, and wireless networks.</span><br></li><li><span>Hands-on experience with routers, switches, firewalls, access points, and structured cabling systems.</span><br></li><li><span>Experience in fibre-optic and copper-cable installation, termination, and testing is preferred.</span><br></li><li><span>Familiarity with Cisco or equivalent networking equipment.</span><br></li><li><span>CCNA, CCNP, CompTIA Network+, or equivalent certification is preferred.</span><br></li><li><span>Ability to use network diagnostic, monitoring, and cable-testing tools.</span><br></li><li><span>Strong troubleshooting, documentation, communication, and teamwork skills.</span><br></li><li><span>.</span><br></li><li><span>.</span><br></li></ul>Interested candidates can send cv to 31313903/ bency@madre-me.com<br><br><br> </div>

<p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings. Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required. Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD, MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels. Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System. Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs. Provide technical solutions and maintenance for all electrical system installed within QC Buildings, Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes. Generate technical layouts and technical reports. Understand and implement the basis of the Computer Maintenance Management Systems. Perform thermo graphic and analysis for the electrical equipment. Provide assistance and guidance to other technical teams, whenever required. Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.<br>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.<br>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels<br>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.<br>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.<br>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,<br>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.<br>Generate technical layouts and technical reports.<br>Understand and implement the basis of the Computer Maintenance Management Systems<br>Perform thermo graphic and analysis for the electrical equipment.<br>Provide assistance and guidance to other technical teams, whenever required<br>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.<br>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.<br>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels<br>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.<br>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.<br>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,<br>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.<br>Generate technical layouts and technical reports.<br>Understand and implement the basis of the Computer Maintenance Management Systems<br>Perform thermo graphic and analysis for the electrical equipment.<br>Provide assistance and guidance to other technical teams, whenever required<br>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>