وظائف اخصائي العمليات في قطر

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Advise and support Mechanical Engineering activities during EPC and Startup phase until handover to permanent Asset whilst ensuring project deliverables meet Operations expectations in term of Safety, Operability, Reliability and Maintainability over the facility design lifecycle.</li> </ul><br><ul> <li>Provide a variety of Mechanical Engineering support to contribute to the division strategy and goals which includes design reviews, commissioning, start-up, failure analysis, advanced troubleshooting and develop work packs to maintenance executed modifications.</li> <li>Define and document best practices within the area of expertise and recommends performance improvement initiatives.</li> <li>Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs.</li> <li>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</li> <li>Control and supervise the activities undertaken by contractors, consultants and service providers.</li> <li>Guide less experienced engineers in implementing the company integrity and reliability systems.</li> <li>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</li> <li>Maintain Issue Register identifying and resolving critical issues including new technology risks(under area of responsibility) which could impact new project Reliability and Availability.</li> <li>Provide Management of Change related technical support to assigned Assets (Operations)and identifying timely solutions to ensure Asset Integrity and Reliability sustaining safe and continuous plant environment.</li> <li>Active participation in Safety Workshops, Cold Eye Reviews and Value Improvement Workshops. Steward and participate in Root Cause Failure Analysis (RCFA), scenario based risk assessments (SBRAs), risk screening and Formal Risk Assessment (FRA).</li> </ul><br><ul> <li>Bachelor degree in Engineering or equivalent</li> <li>8 years' experience in an oil and gas environment.</li> <li>Attained specialist level of competencies as per Mechanical Technical Competencies.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance </li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> <li><strong>Duration:</strong><ul> <li>15 months to 24 months, with possible extension</li> </ul></li> <li><strong>Location:</strong><ul> <li>Qatar Onshore</li> </ul></li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Hiring: Commissioning Specialist (Technical) – Oil &amp; Gas / LNG <br><strong>Location:</strong> Doha, Qatar<br> <strong>Industry:</strong> Oil &amp; Gas / LNG<br> <strong>Contract Duration:</strong> 36 Months<br> Work Schedule ✅ 100% Onshore<br> ✅ Rotation: 12 Weeks ON / 2 Weeks OFF<br> ✅ 6 Days per Week<br> ✅ 8–10 Hours per Day<br> Job Purpose We are seeking an experienced <strong>Commissioning Specialist (Technical)</strong> to provide technical, administrative, and information management support to the Central Function (CFx) team supporting Compression Projects. The successful candidate will play a key role in commissioning, systems completion, operational handover, technical governance, SharePoint administration, document control, technical library management, workforce planning, and recruitment coordination activities.<br> Key Responsibilities<ul><li>Support commissioning, systems completion, and operational handover activities.</li><li>Administer and maintain SharePoint sites, document libraries, workflows, and permissions.</li><li>Manage CFx technical libraries, procedures, standards, specifications, and lessons learned databases.</li><li>Prepare and control technical reports, presentations, governance documents, and procedures.</li><li>Coordinate recruitment, onboarding, manpower planning, and personnel assessments.</li><li>Support specialist service contracts, framework agreements, and contractor performance reporting.</li><li>Generate dashboards, recruitment trackers, resource forecasts, and technical status reports.</li><li>Coordinate technical communications between project teams, operations, and EPC contractors.</li><li>Provide first-line support for SharePoint and information management systems.</li><li>Drive continuous improvement initiatives for information governance and team efficiency.</li></ul>Requirements <br>✔ Bachelor's Degree in Engineering or Applied Sciences<br> ✔ Minimum <strong>8 years of experience</strong> in medium to large-scale Oil &amp; Gas commissioning projects<br> ✔ Strong experience with:<br><ul><li>SharePoint administration</li><li>Document control and information management systems</li><li>Recruitment and workforce planning support</li><li>Technical reporting and governance documentation</li><li>Commissioning and Systems Completion processes</li></ul>✔ Technical Knowledge:<br><ul><li>P&amp;IDs</li><li>Datasheets</li><li>General Arrangement Drawings</li><li>Commissioning &amp; Start-up Activities</li><li>Pre-commissioning &amp; Systems Completion</li><li>Operational Handover</li><li>Vendor Management (SAT, OTP, etc.)</li><li>LNG facilities and equipment</li></ul>✔ Experience with:<br><ul><li>Oil &amp; Gas Operators</li><li>EPC Contractors</li><li>Service Companies</li><li>Large-scale LNG Projects</li></ul>Skills Required<ul><li>Strong leadership and coordination skills</li><li>Excellent planning and organizational abilities</li><li>Advanced Microsoft Office proficiency</li><li>Strong analytical and problem-solving capabilities</li><li>Effective stakeholder management and communication skills</li><li>Fluent English (Written &amp; Verbal)</li><li>Ability to manage multiple priorities in a fast-paced environment</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Cold Email Specialist (Deliverability, Client Success &amp; Campaign Operations) – Remote Position Type: Full-Time, Remote Working Hours: Flexible, with overlap during U.<br>S. business hours About the Role At Pavago, one of our clients is hiring a highly execution-focused Cold Email Specialist to own client campaign performance, deliverability, retention, and operational execution within a fast-growing startup environment.<br> This is not a passive account management role.<br> You’ll be responsible for the full lifecycle of outbound cold email campaigns—from inbox placement and deliverability to campaign optimization, client communication, and long-term retention.<br> You’ll work closely with the founder, outreach team, developers, and operations to ensure campaigns perform, clients stay successful, and delivery standards continue to scale.<br> If you understand cold email beyond basic outreach—including infrastructure, warm-up, deliverability, inbox health, copy performance, and campaign optimization—this role is a strong fit.<br> What You’ll Own Client Campaign Ownership Manage a portfolio of 20–30 active client accounts.<br> Serve as the primary point of contact for campaign performance and communication.<br> Lead client check-ins and performance reviews.<br> Manage expectations and provide proactive campaign updates.<br> Build long-term client relationships.<br> Identify risks early and proactively reduce churn.<br> Cold Email Campaign Performance Diagnose and optimize underperforming campaigns.<br> Troubleshoot: Deliverability issues Inbox placement Domain reputation Spam issues List quality Low reply rates Optimize: Subject lines Messaging Sequences Personalization Quality-check campaigns before launch.<br> Continuously improve campaign performance through testing and optimization.<br> Deliverability &amp; Infrastructure Manage and optimize: Warm-up systems Inbox reputation Sending domains DNS configuration SPF DKIM DMARC Monitor inbox placement and sender health.<br> Troubleshoot technical campaign issues independently.<br> Collaborate with technical teams to improve outbound infrastructure and automation.<br> Copywriting &amp; Campaign Optimization Write and refine outbound cold email copy.<br> Improve: Open rates Reply rates Positive response rates Test messaging variations using campaign performance data.<br> Balance personalization with scalable outreach.<br> Process Improvement &amp; Operations Build and maintain campaign documentation and SOPs.<br> Improve operational workflows and delivery processes.<br> Track: SLAs Client health Campaign performance Operational metrics Help build scalable systems as the company grows.<br> Cross-Functional Collaboration Work closely with: Developers Infrastructure teams Outreach specialists Leadership Coordinate campaign execution and issue resolution.<br> Report directly to the founder on: Campaign performance Client risks Retention Operational improvements What Success Looks Like Clients remain satisfied and renew their services.<br> Campaigns maintain strong inbox placement and deliverability.<br> Reply rates and conversion rates improve consistently.<br> Campaigns launch accurately and on time.<br> Operational workflows remain organized and scalable.<br> Technical and client issues are resolved proactively.<br> What Makes You a Strong Fit You take ownership instead of waiting for direction.<br> You thrive in startup environments with evolving systems.<br> You understand that deliverability is just as important as messaging.<br> You’re equally comfortable solving technical and client-facing challenges.<br> You communicate confidently with founders and executives.<br> You focus on outcomes, execution, and continuous improvement.<br> Required Experience &amp; Skills Experience Experience working in: Cold email agencies Lead generation companies Outbound sales organizations Startup operations Strong expertise in: Cold email strategy Deliverability Inbox placement Warm-up systems Outbound infrastructure Strong outbound copywriting skills.<br> Experience troubleshooting: Spam issues Domain reputation Low-performing campaigns Technical understanding of: APIs Automations Workflows Outbound systems Daily experience using: ChatGPT Claude AI-powered automation workflows Strong client communication and relationship management skills.<br> Comfortable working independently in fast-paced environments.<br> Nice to Have Experience using: Instantly Smartlead Clay Apollo Lemlist Outreach HubSpot Familiarity with: Zapier Make Webhooks Automation platforms Experience scaling outbound systems for startups or agencies.<br> SaaS or lead generation industry experience.<br> Tech Stack Instantly Smartlead Clay Apollo Lemlist Outreach HubSpot Zapier Make ChatGPT Claude What a Typical Day Looks Like Review campaign dashboards and inbox health.<br> Troubleshoot deliverability and reply-rate issues.<br> Optimize copy, targeting, and sequencing.<br> Meet with clients to review campaign performance.<br> Coordinate with outreach and technical teams.<br> Launch and quality-check new campaigns.<br> Monitor domain reputation and warm-up systems.<br> Update SOPs and operational documentation.<br> In short: You’ll own the technical performance, operational execution, and client success of outbound cold email campaigns while helping scale reliable systems that generate consistent results.<br> Key Metrics for Success (KPIs) Client retention and churn reduction.<br> Inbox placement and deliverability rates.<br> Campaign reply and conversion rates.<br> Client satisfaction and relationship health.<br> SLA adherence and operational consistency.<br> Overall improvement in client campaign performance.<br> Why This Role Stands Out High ownership with direct impact on client success.<br> Close collaboration with founders and technical teams.<br> Blend of: Deliverability Campaign operations Client success Outbound strategy Copywriting Opportunity to build scalable outbound systems.<br> Fast-paced startup environment with long-term growth opportunities.<br> Career progression into: Client Success Manager Outbound Operations Lead Deliverability Specialist Growth Operations Manager Interview Process Application Review Spark Hire Intro Video (3–5 minutes) Founder Interview Offer &amp; Onboarding What Happens After You Apply After submitting your application, you’ll receive an email invitation from Spark Hire to record a short 3–5 minute Intro Video .<br> This is the first step in our hiring process and can be completed whenever it’s convenient for you.<br> Instead of multiple initial screening calls, you’ll have one opportunity to introduce yourself, discuss your experience managing cold email campaigns, and explain how you’ve improved deliverability, inbox placement, campaign performance, and client retention.<br> You’ll also have the chance to demonstrate your knowledge of outbound infrastructure, warm-up systems, copy optimization, and the AI tools you use to improve operational efficiency.<br> Your video will be reviewed by the hiring team before moving to the founder interview.<br> You can record your video as many times as you’d like before submitting it—only your final version will be reviewed.<br> Please keep an eye on both your inbox and spam folder for your Spark Hire invitation after applying.<br> Apply Now If you’re passionate about cold email, understand deliverability inside and out, and enjoy owning client outcomes from campaign launch through long-term success, we’d love to hear from you.<br> Apply today and help build high-performing outbound systems that drive measurable business growth.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>We are looking for a Senior IT Operations Specialist to manage and support IT infrastructure, systems, cybersecurity, and day-to-day technology operations across the organization.</p><br><br><p>The successful candidate will be responsible for maintaining reliable and secure IT systems, providing advanced technical support, managing Microsoft technologies and infrastructure, coordinating with technology vendors, and supporting the continuous improvement of IT operations.</p><br><br><br>Key Responsibilities<ul><li>Manage and support IT infrastructure, networks, servers, endpoints, and related systems.</li><li>Administer Microsoft 365, Microsoft Intune, Azure, and Active Directory environments.</li><li>Manage endpoint devices, user accounts, access, and IT assets.</li><li>Support backup, recovery, data protection, and business continuity processes.</li><li>Monitor system performance, availability, security, and overall infrastructure health.</li><li>Troubleshoot and resolve complex Tier 2 and Tier 3 technical issues.</li><li>Support cybersecurity, vulnerability management, access controls, and information security practices.</li><li>Manage employee IT onboarding and offboarding, including user accounts, devices, and access.</li><li>Maintain accurate technical documentation, procedures, asset records, and IT knowledge resources.</li><li>Manage and coordinate with IT vendors, software providers, hardware suppliers, and service providers.</li><li>Review software licenses, IT services, and infrastructure requirements to identify opportunities for cost optimization.</li><li>Support the evaluation and implementation of new IT tools, systems, and technology solutions.</li><li>Assist with internal IT projects, system upgrades, digital workplace solutions, and technology improvements.</li><li>Prioritize technical incidents and infrastructure requirements according to business needs.</li><li>Provide occasional after-hours or weekend support when required for critical incidents or planned technology activities.</li></ul><br>Requirements<ul><li>Bachelor's degree in Information Technology, Computer Science, Management Information Systems, or a related field.</li><li>7-10 years of relevant experience in IT infrastructure, systems administration, and technical support.</li><li>Minimum 3-5 years of experience in a senior, supervisory, technical lead, or similar capacity.</li><li>Strong hands-on experience with Microsoft 365, Microsoft Intune, Azure, and Endpoint Management.</li><li>Good knowledge of Active Directory and Hybrid Active Directory environments.</li><li>Experience with backup and recovery solutions such as Veeam.</li><li>Practical experience with network infrastructure, firewalls, and network security.</li><li>Experience in information security, cybersecurity controls, compliance, vulnerability management, and audit readiness.</li><li>Experience with IT vendors, software licensing, and technology cost optimization.</li><li>Strong troubleshooting and problem-solving abilities.</li><li>Good technical documentation and stakeholder communication skills.</li><li>Ability to work independently, manage priorities, and support multiple business requirements.</li><li>Willingness to provide occasional after-hours or weekend support when required.</li></ul> <br><br> </div>

<strong>Overview</strong> <br> <br> <p> <strong>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</strong> </p> <p> </p> <p>The MWR Specialist is responsible for performing the day-to-day operational tasks for any one of the following functional areas: Housekeeping/Custodial, Community Activities Centers (CAC), Linen Exchange, Fitness Center, Lounger operations, and Media Center. Services provided include but are not limited to; serving any alcoholic beverages, customer service, media support, linen exchange, custodial services, fitness front desk support, event planning and executing, basic facility &amp; equipment maintenance, games, and other supporting activities as specified in the Performance Work Statement. The MWR Specialist reports to the assigned Dept. Manager.</p> <br> <strong>Responsibilities</strong> <br> <br> <ul> <li>Provides excellent customer service and performs related tasks in functional areas of Recreational Services, Fitness Centers, Lounge Operation, Linen exchange, Housekeeping / custodial.</li> <li>Shall be courteous to customers and able to identify and verbally communicate all items in English.</li> <li>Responsible for maintaining a safe, clean, sanitary, healthy, presentable, professional atmosphere, free of dust, clutter and trash in all working facilities and areas.</li> <li>Responsible for completing all assigned Vectrus and Government required training courses.</li> <li>Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools).</li> <li>Responsible for precise execution of company time reporting procedures and accurate completion of timesheet.</li> <li>Performs other duties as assigned.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Qualifications</strong> </p> <ul> <li>High school diploma or equivalent.</li> <li>Must be a U.S. Citizen with a current, valid U. S. Passport and U. S. Driver s License.</li> <li>Must be approved by host country vetting process.</li> <li>Must be able to read, write, speak and understand English fluently</li> <li>Must be able to pass employment requirements that include medical, dental, drug testing, background checks.</li> </ul> <p> <strong>Clearance:</strong> </p> <ul> <li>Must have at the time of offer and maintain a valid U. S. SECRET or Interim Secret Security Clearance.</li> </ul> <p> <strong>Experience</strong> </p> <ul> <li>Minimum of one year of experience working in customer service with retail, hotel front desk operations and/or restaurant experience</li> </ul> <p> <strong>Skills</strong> </p> <ul> <li>Good communication, teamwork, decision making, and customer service skills.</li> <li>Capable of operating audio and visual equipment.</li> </ul> <p> <strong>Working Environment</strong> </p> <ul> <li>Work will be primarily indoors but may also be outdoors to support various events. </li> <li>Exposure to heat, cold, dust, noise, chemicals may occur. </li> <li>Overtime and shift work may be required depending on contractual needs. </li> <li>Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. </li> <li>Task specific work environment training will be provided as required. </li> <li>Must be prepared to function in a wartime environment to support U.S. interests. </li> <li>100% Overseas Assignment.</li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. #LI-RB1

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><b>Property Management Specialist</b></span><br><br><b><span>Industry:</span></b><span> Real Estate</span><br><br><b><span>Location:</span></b><span> Qatar</span><br><br><span><b>Job Summary</b></span><br><br><span>The Property Management Specialist will be responsible for the efficient day-to-day management of assigned residential, commercial, and/or mixed-use properties. The role involves coordinating with tenants, property owners, contractors, and internal departments to ensure properties are well maintained, occupancy and rental income are optimised, and tenant services are delivered to a high standard. The ideal candidate should have strong knowledge of property management operations, leasing coordination, tenant relations, maintenance management, documentation, and the Qatar real estate market.</span><br><br><span><b>Key Responsibilities</b></span><br></span><ul><li><span>Manage the day-to-day operations of assigned residential and commercial properties.</span><br></li><li><span>Handle tenant inquiries, complaints, renewals, move-ins, and move-outs.</span><br></li><li><span>Coordinate with maintenance, facility management, contractors, and service providers.</span><br></li><li><span>Conduct regular property inspections and ensure properties are maintained to required standards.</span><br></li><li><span>Monitor lease agreements, occupancy, rental collections, and tenant documentation.</span><br></li><li><span>Coordinate maintenance requests and ensure timely resolution of issues.</span><br></li><li><span>Maintain accurate property, tenant, contract, and maintenance records.</span><br></li><li><span>Prepare regular reports on occupancy, rentals, maintenance, and property performance.</span><br></li><li><span>Ensure compliance with company policies and applicable Qatar real estate regulations.</span><br></li><li><span>Maintain strong relationships with tenants, owners, and service providers.</span><br></li></ul><br><span>Requirements<span>Bachelor’s degree/diploma in Real Estate, Property Management, Business Administration, or related field.</span><br><b><span>3–5 years of experience in property management, preferably in Qatar.</span></b><br><span>Previous experience in the </span><b><span>real estate industry is required</span></b><span>.</span><br><span>Good knowledge of property leasing, tenant relations, and maintenance coordination.</span><br><span>Strong communication, negotiation, and problem-solving skills.</span><br><span>Good command of English; Arabic is an advantage.</span><br><span>Proficiency in Microsoft Office and property management systems is preferred.</span><br><span>Qatar driving license is an advantage.</span><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4392-3-Q - Commissioning Specialsit (Technical) <p>Qualifications*</p><br><p>Bachelors Degree in Applied Sciences or Engineering</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years experience with medium to large project commissioning in the Oil &amp; Gas Industry.<br> Experience administering SharePoint sites, document libraries, permissions structures, workflows and information management systems.<br> Experience supporting technical teams through management of procedures, specifications, reports, lessons learned databases and controlled documentation.<br> Experience supporting recruitment, onboarding, manpower reporting and resource planning activities within project or operational environments.<br> Knowledge of commissioning, systems completion, project execution, operational handover and associated project lifecycle phases.<br> Experience coordinating technical documentation, management reports, presentations, governance documentation and project communications<br> Experience with Oil &amp; Gas companies, Contractors, or Service Companies.<br> Expert in reading P&amp;IDs, Datasheets, General Arrangement drawings and procedures.<br> Knowledge in projects execution, engineering, operations, pre-commissioning, commissioning and systems completion.<br> Knowledge in compliance with contract requirements including codes and standards, and contract technical specification compliance.<br> Experience with vendors operating in the LNG industry, such as compressors, power generation, control systems, topsides, etc.<br> Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.<br> Experience in start-up support to Operation.<br> Supervision of vendor activities (SAT, OTP, etc.).</p><br> <p><strong>Technical and Business Skills:-</strong></p><br><p> Strong organizational, leadership, coordination, planning, interface and technical judgment skills.<br> Ability to adapt to tight deadlines, heavy workloads and frequent changes in priorities.<br> Able to identify and analyse complex issues and provide recommendations. Prepare contingency plans for unexpected scope changes (pro-active, forward-looking)<br> Excellent communication skills and ability to read, write and speak fluent English, with strong teamwork facilitation, with the ability to communicate and interact at all levels of the organization.<br> Strongly Client focused with strong problem-solving skills.<br> Proficient in Microsoft Office suite of software programs, advanced computer literacy.<br> Knowledge of worldwide vendors and contractors.<br> Good communication and influencing skills.<br> Willing and able to travel as required.</p><br> <br> <br> </div>

Company Description<br><br>Join Saipem and engineer a sustainable future.<br><br>We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.<br><br>Purpose Of The Position<br><br>As Lifting Specialist, you will be part of the Operations Department and will be responsible for the identification, preparation, management, review, approval, coordination, and control of offshore lifting and rigging activities throughout the project lifecycle. The role shall ensure that lifting configurations, crane systems, rigging arrangements, lifting objects, hydrodynamic considerations, and offshore vessel motions are carefully evaluated and managed to support safe and efficient offshore operations.<br><br>The Lifting Specialist will act as the dedicated offshore lifting/rigging focal point at site for the coordination, management, and control of all heavy and critical lifting activities, ensuring compliance with Company requirements, Industrial Codes and Standards, project specifications, and applicable industry guidelines. The position will be subject to Client approval as required by the Contract.<br><br>How can you support us? Here are below main job responsibilities:<br><br>Support the successful execution of offshore lifting and rigging activities by providing technical leadership and ensuring all lifting operations are properly planned, assessed, approved, and executed in accordance with project requirements and applicable standards.<br><br>Serve as the dedicated offshore Lifting/Rigging Specialist at Site for the coordination, management, and control of all heavy and critical lifts. Identify, prepare, review, and approve offshore lifting plans, rigging arrangements, lift studies, calculations, and lifting procedures. Ensure lifting configurations, crane systems, rigging details, lifting objects, hydrodynamic effects, and offshore vessel motions are adequately assessed prior to execution. Develop detailed lift plans for critical lifting activities, including:Vessel deck to own vessel back deck lifts with item static weight greater than 20 Te. Vessel-to-vessel transfers with item static weight greater than 20 Te. Lowering of subsea structures and equipment exceeding 5 Te to seabed and recovery from seabed to deck. Critical lifts involving clamps, sleepers, lifting frames, and similar subsea assets. Review and validate lifting calculations including Dynamic Amplification Factor (DAF), crane utilization, rigging capacity, center of gravity, lift radius, and load distribution analyses. Verify lifting arrangements involving wire ropes, shackles, hooks, slings, spreader beams, lifting frames, and other lifting accessories. Coordinate lifting interfaces between engineering, marine, vessel operations, offshore construction, subsea installation, and subcontractor teams. Provide technical support during offshore transportation, installation, recovery, and subsea construction campaigns. Participate in lift risk assessments, HAZIDs, toolbox talks, SIMOPS reviews, and operational readiness assessments. Monitor offshore lifting operations and provide technical guidance to ensure safe and efficient execution. Ensure all lifting activities are performed in accordance with Company procedures, Industrial Codes and Standards, IMCA, IOGP, and project-specific requirements. Prepare technical reports, lifting dossiers, lifting registers, lessons learned reports, and close-out documentation. Promote HSE excellence and continuous improvement across all lifting and rigging activities.<br>What are we looking for? <br><br>Education<br><br>Bachelor’s Degree in Engineering or related discipline Certified Lifting Equipment Engineers Association (LEEA) or an approved equivalent certification<br><br>Background/Experience<br><br>Minimum 8 years of Oil & Gas industry experience. Minimum 5 years of experience in a Lifting Specialist, Rigging Specialist, Offshore Lifting Engineer, Critical Lift Specialist, or similar role. Proven experience in the design, review, approval, and execution of offshore lifting operations. Demonstrated experience in vessel-to-vessel lifting, vessel deck lifting, subsea lowering operations, recovery operations, and heavy lift activities. Experience in offshore construction, marine operations, subsea installation, and offshore project execution. Experience reviewing and approving critical lift plans and rigging studies for offshore operations. Familiarity with lift rigging arrangements including wire ropes, shackles, hooks, crane capacities, lift radius calculations, center of gravity assessments, and subsea asset lifting excursion zones. Experience supporting offshore installation methodologies and subsea intervention activities. Experience working with international teams and clients within offshore and Middle East project environments is an advantage.<br><br>Languages<br><br>Proficient in English (mandatory)<br><br>Technical Knowledge / Skills<br><br>Strong knowledge of offshore lifting engineering, rigging design, and critical lift management. Familiarity with Dynamic Amplification Factor (DAF) calculations, safe working load verification, rigging calculations, and crane utilization assessments. Thorough understanding of offshore lifting equipment including wire ropes, shackles, hooks, slings, lifting beams, spreader beams, lifting frames, and crane systems. Familiarity with IMCA, IOGP, Company Standards, and offshore Oil & Gas lifting requirements. Knowledge of crane load charts, crane capacities, lift radius calculations, load-out operations, and center of gravity determination. Experience with subsea installation methodologies, subsea handling, and offshore diving support operations. Understanding of offshore environmental conditions, vessel motions, hydrodynamic effects, and associated lifting risks. Ability to interpret engineering drawings, lifting arrangements, technical specifications, procedures, and project documentation. Proficiency in MS Office and engineering/document management systems. Strong coordination, communication, stakeholder management, and problem-solving skills.<br><br>What else should you know? <br><br>Some travelling may be required within the Middle East and offshore/onshore project locations, depending on project needs.<br><br>What We Can Offer To You<br><br>Permanent Contract – Project-based position Corporate Benefits: We offer a comprehensive benefits package Working Hours: 45 hours (9 hours x 5 days) Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals. Location: Doha, Qatar<br><br>Your opinion helps us grow every day! We would greatly appreciate it if you could share your opinion by completing this short, anonymous survey. https://forms.office.com/e/3s Ce293xsf<br><br>Additional Information<br><br>We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form!<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our career page here and our Instagram profile here. <br><br>One vision, many paths, limitless possibilities.<br><br>PRIVACY POLICY<br><br>In accordance with the Qatar's Personal Data Privacy Protection Law (PDPPL) enacted as Law No. 13 of 2016 (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D. Lgs 196/03 and art 13 GDPR 679/16)

<p>1. Process transactions including account opening and management, remittances and inquiries, loan issuance and repayment, treasury back-office operations, and trade finance transactions (L/G, L/C, Funded Risk Participation), etc. Input the transactions into the system and submit them to the Head/Deputy Head of the Banking Department for checking and authorization. 2. Strictly follow the requirements of the AML/CFT Manual and Compliance Manual. Carry out AML checks during transaction processing and implement the Bank's AML policy. Report any suspicious transactions to the Head of the Banking Department. 3. Assist in updating the regulations and internal protocols related to the Bank's commercial banking services. 4. Complete the reconciliation of customers' bank accounts on a monthly basis and the Bank's Nostro accounts on a daily basis. Record transactions daily and file the processed transaction vouchers on a regular basis. 5. Communicate with counterparts at correspondent/respondent banks using effective communication skills, and process payments in all currencies. 6. Prepare transaction reports for Senior Management, Head Office, regulatory authorities, and external auditors. Analyze operational data and submit it to the Head of the Banking Department for review. 7. Assist in updating and optimizing the Bank's related products and procedures.</p><p>• Bachelor's degree in Banking, Finance, Business Administration, Economics, or a related discipline. • Professional certifications such as CDCS (Certified Documentary Credit Specialist), CSDG (Certificate in Specialist Documentary Guarantees), or CAMS (Certified Anti-Money Laundering Specialist) will be considered an advantage. • Strong analytical and statistical analysis skills with the ability to interpret operational and financial data. • Age preferably below 35 years. • Excellent command of English, both written and spoken, is mandatory. • Proficiency in Mandarin Chinese and/or Arabic will be considered a strong advantage.</p>

Job description:<br><br> Part A: Job Specification Job Purpose Advise and support Process Engineering related activities during EPC and Startup phase until handover to permanent Asset whilst ensuring project deliverables meet Operations expectations in term of Safety, Operability, Reliability and Maintainability over the facility design life cycle. Job Context & Major Challenge(s) - I Able to effectively influence project decisions based not only on CAPEX but considering OPEX for the project life cycle. Ensures compliance with QG specifications, processes and procedures for the assigned projects. Participate in reviews and provide technical inputs to designs and procedures for the implementation of approved field operations whilst mitigating new technology risks introduced by the project. Key Job Accountabilities - I Actively participate and provide process engineering support to RCFA, Hazop, FRA, Hazid, SIL verification and process safety and reliability issues. Support development of Standard Operating Procedures required for the new projects. Develop and implement process surveillance tools for Operations assets in compliance with surveillance plan to ensure safe, reliable and optimum production, including troubleshooting, engineering recommendations and timely escalation of threats and deviations from surveillance monitoring. Active participation in System Completions processes for Walk-down prior to commissioning and startup (eg, witness of chemical/catalysts loading). Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability, Availability and Cyber Security. Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives. Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility. Support high risk commissioning activities for high complexities & large scale projects by (a) undertaking stringent system surveillance, (b) tuning and optimizing systems, and (c) providing advisory supports to Operations and Maintenance. Qualifications Bachelor’s degree in chemical engineering. Knowledge and/or Experience - I 8 years' experience in an oil and gas environment.

Job Purpose<br><br>Advise and support electrical engineering activities during the EPC and start-up phases until handover to the permanent asset, whilst ensuring project deliverables meet Operations expectations in terms of safety, operability, reliability, and maintainability throughout the facility design lifecycle.<br><br>Internal Interfaces<br><br>Regular contact with Project Management Team (PMT) and Operations departments. Periodic contact with Engineering & Projects and HSEQ Group.<br><br>External Interfaces<br><br>Frequent contact with shareholders’ Subject Matter Experts (SMEs), EPC contractors, vendors, suppliers, and engineering consultants.<br><br>Job Context & Major Challenges<br><br>Effectively influence project decisions by considering not only CAPEX but also OPEX throughout the project lifecycle. Ensure compliance with QG specifications, processes, and procedures for assigned projects. Participate in reviews and provide technical inputs to designs and procedures for the implementation of approved field operations while mitigating risks associated with new technologies introduced by the project.<br><br>Financial Dimension<br><br>As defined for this job level in the Delegation of Authority and/or approved budget.<br><br>Generic Accountabilities<br><br>Safety, Health, Environment & Quality<br><br>Ensure all activities are undertaken in compliance with Company Safety, Health, Environment and Quality policies, regulations, and standards.<br><br>Qatarization Program<br><br>Contribute to the development of Qatari employees. This accountability is a condition of employment for expatriate employees.<br><br>Firewall Compliance<br><br>Ensure all activities undertaken comply with anti-trust and competition laws, as well as Company firewall policies and procedures.<br><br>Key Accountabilities<br><br>Provide a variety of Electrical Engineering support to contribute to division strategy and goals, including design reviews, commissioning, start-up, failure analysis, and advanced troubleshooting. Develop and implement surveillance and administration programs for critical Electrical Systems of new projects to achieve high standards of reliability, availability, and cyber security. Define and document best practices within the area of expertise and recommend performance improvement initiatives. Develop plans and work schedules to ensure effective completion of tasks and activities while meeting section and division KPIs. Provide technical input related to area of expertise to other disciplines and functions as required to support overall business objectives. Control and supervise electrical engineering activities undertaken by contractors, consultants, and service providers. Guide less experienced engineers in implementing company integrity and reliability systems. Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility. Maintain an Issue Register identifying and resolving critical issues, including new technology risks, that could impact project reliability, availability, and cyber security. Support high-risk commissioning activities for high-complexity and large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance.<br><br>Qualifications<br><br>Bachelor's Degree in Engineering.<br><br>Knowledge and/or Experience<br><br>Minimum 8 years of experience in an Oil & Gas environment. Attained specialist-level competencies as per Electrical Technical Competencies requirements.<br><br>Technical & Business Skills<br><br>Ability to work and make decisions under highly stressful conditions. Fluent in written and spoken English. Strong leadership and people management skills. Computer literacy with regular use of professional office and technical applications.<br><br>Interested? Please send your CV to norniqmah.abkarim@airswift.com.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Advise and support electrical engineering activities during and start-up phase until handover to permanent asset whilst ensuring project deliverables meet operations expectations in term of safety, operability, reliability, and maintainability over the facility design life cycle.</li> </ul><br><ul> <li>Provide a variety of Electrical Engineering support to contribute to the division strategy and goals which include design reviews, commissioning, start-up, failure analysis and advanced troubleshooting.</li> <li>Develop and implement surveillance and administration programs for critical Electrical Systems of new projects to achieve high standards of reliability, availability and cyber security.</li> <li>Define and document best practices within the area of expertise and recommend performance improvement initiatives.</li> <li>Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs.</li> <li>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</li> <li>Control and supervise the electrical engineering activities undertaken by contractors, consultants and service providers.</li> <li>Guide less experienced engineers in implementing the company integrity and reliability systems.</li> <li>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</li> <li>Maintain Issue Register identifying and resolving critical issues including new technology risks under area of responsibility which could impact new project reliability, availability and cyber security.</li> <li>Support high risk commissioning activities for high complexities &amp; large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance.</li> </ul><br><ul> <li>Bachelor's degree in Engineering.</li> <li>8 years' experience in an oil and gas environment.</li> <li>Attained specialist level of competencies as per electrical technical competencies.</li> <li>Able to work and make decisions under highly stressing conditions.</li> <li>Fluent in written and spoken English.</li> <li>Strong leadership &amp; people skills.</li> <li>Computer literacy involving the regular use of professional office and technical applications.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Reporting to Head of Construction, the Construction Specialist is responsible for managing the material &amp; preservation activities, including protection of all project materials from preparation stage to ensure objectives are safely met within the approved scope, budget and schedule.</li> </ul><br><ul> <li>Ensuring adherence to all safety protocols and regulations during fabrication process.</li> <li>Manages and ensures successful execution of Topsides structures fabrication project components to meet prioritized objectives (Safety, Quality, Schedule, and others, as appropriate).</li> <li>To supervise and control the activities of the Contractor/Subcontractors related to the material &amp; preservation to ensure that it complies with contractual requirements, project documentation and applicable International Standards.</li> <li>To assess the constructability aspects, as well as the compliance with all technical requirements, of the deliverables provided by the Engineering Team Contractor.</li> <li>To review deviations to LNG construction standards for comments with Contractors / Subcontractors input, to deliver a consistent dossier (documents, materials, procured and fabricated items, precom/com dossiers, as built …) for the construction activities.</li> <li>Identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.</li> <li>Review Contractor's progress reports and reports for all the activities, highlighting critical problems, drifts and dysfunctions if any.</li> <li>To Liaise with Contractors/Subcontractors for all structure subjects, MC, Pre-commissioning and Commissioning to ensure the Contractors/Subcontractors progress follow up and reporting.</li> <li>To Participate in Risk Assessments, kick off meetings and Pre-Job Meetings, technical meeting etc. as required in accordance with Company's referential.</li> <li>To participate in REX and Lessons Learned for the Company.</li> </ul><br><ul> <li>Bachelors Degree in Sciences or Engineering</li> <li>8 years specific involvement in project execution with previous leading roles in material &amp; preservation works within a contract execution environment in Oil &amp; Gas, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.</li> <li>Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.</li> <li>Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation, brownfield execution, and hook-up, as applicable to the project scope.</li> <li>Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.</li> <li>Knowledge of execution methods and risks associated with sour gas and LNG production facilities.</li> <li>Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>India</li> </ul> </li> </ul> </div>

<p> <strong>Key Result Areas:</strong> </p> <ul> <li>Verify that all the requirements imposed by the Operational and Infrastructure Safety Certificates and the Ministry of Transport (MOT) are being adhered to</li> <li>Ensure compliance of service providers to EN 50126, EN 50128, EN50129, IEC 61508 or equivalent standards.</li> <li>Act as the custodian of the Education City Hazard Management, Hazard Log administration IT system, regulating access, managing functions and making improvements. Analyze Hazard Log data and develop cost efficient solutions to improve the inherent (as designed) operational safety performance across the QF ECT Operations.</li> <li>Undertake &amp; update the HAZID (Hazard Identification) / HAZOP (Hazard and Operability Study) regularly to support the Safety Review Board meeting</li> <li>Verify that the safety cases outline the safety risks associated with tram operations and describe the measures in place to mitigate those risks, ensuring the safety and reliability of tram services.</li> <li>Carry out safety inspections and audits on Service Providers to identify potential hazards, assess risks, verify the effectiveness of risk management strategies and compliance with standards / rule book etc.</li> <li>Review regularly and update policies and procedures to align with changing regulatory requirements.</li> <li>Collaborate with tram operations and maintenance teams to ensure that safety and compliance considerations are integrated into daily operations and risk mitigation measures are effectively implemented.</li> <li>Support and collaborate with Maintenance Section in FRACAS, FRB and RCA to identify equipment reliability issues, recommend corrective actions, and enhance performance and operational availability.</li> <li>Review and ensure the accuracy of system architecture models, including Reliability, Availability, Maintainability and Safety (RAMS) analyses.</li> <li>Coordinating and ensuring the implementation of system reliability requirements during operational phases.</li> <li>Serving as the technical lead for Systems Assurance teams, covering RAM, EMC, Fire &amp; Life Safety (FLS), and Human Factors.</li> <li>Other reasonable tasks as assigned by supervisor</li> </ul> <p> </p> <p> <strong>Minimum Knowledge, Skills &amp; Experience:</strong> </p> <ul> <li>Bachelor s degree in engineering or in a relevant field &amp; 6-8 years of relevant full-time work experience, 2 of which at a supervisory level, in System Assurance in an Operational Railway industry</li> <li>ISO 45001 and ISO 9001 internal or lead auditor certification is desirable</li> <li>Incident investigation skills is desirable</li> <li>Good knowledge of the MOT Railway Safety Regulation Authority s requirements</li> <li>Ability to work effectively, efficiently, and professionally with personnel from QF and other Organizations.</li> <li>Gathering and analyzing audit evidence, assessing compliance with standards and regulations.</li> <li>Excellent writing skills with the ability to draft and edit a variety of written reports and communications and to articulate ideas clearly and concisely; Arabic proficiency is an advantage</li> <li>Proficiency in MS Office applications and other Hazard log software -Comply Pro</li> </ul>

<p>Liaise within RLIC, Port and LNG groups (e.g. Operations, various RLTO) to facilitate and coordinate all project Interface related activities. Provide overall guidance and leadership with respect to the physical interfaces between dredging projects and all interfacing parties. Resolve issues that may arise by making sure that the contractor can perform the scope of work flawlessly without claims for delay or change. Organize and participate in weekly Interface management meetings with Contractor and monitor Project overall interface management register for completion and close out. Support and implement Interface Management Plans, including registers, matrices, and reporting systems. Coordinate multi discipline interface reviews (MEP, civil, instrumentation, etc.) through regular meetings and workshops. Maintain interface-tracking database. Coordinate and ensure that Contractors' Interface Plans are developed, effectively implemented and monitored.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Sciences or Engineering.</li><li>8 years of interface management experience in oil and gas projects.</li><li>Experience with Oil &amp; Gas companies, Contractors, or Service Companies.</li><li>Experience working in large scale operating organizations in Operations, Engineering, Projects, Subsurface, etc.</li><li>Experience in developing Interface Management Plans, developing interface management processes, and creating Project interface registers and interface reporting systems.</li><li>Proficiency in interface management software.</li><li>Exceptional organizational and multitasking skills to manage multiple interface activities simultaneously.</li><li>Some experience in project interface coordination during project FEED and EPCI contract phases.</li><li>Fluent in written and oral English.</li><li>Strong leadership skills, personal integrity, experience guiding and assisting contractor teams.</li><li>Strong analytical, organizational, coordination and planning skills.</li><li>Good written and verbal communications skills and ability to interact / interface at all levels.</li><li>Good mediation skills include conflict resolution, problem-solving, creative thinking, influencing and empathy.</li><li>Proficient in Microsoft Office suite software programs, etc.</li><li>Deep knowledge of industry codes, standards and practices for civil discipline</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li><ul> <li>Support commissioning and systems completion activities.</li> <li>Manage technical documents, reports, and SharePoint sites.</li> <li>Maintain technical records, procedures, and repositories.</li> <li>Ensure information is accurate, controlled, and accessible.</li> </ul></li> </ul> <br><ul> <li>Provide technical and administrative support to the Department Manager, Head of System Completions (Technical) and CFx discipline lead in support of commissioning, systems completion and operational handover activities.</li> <li>Develop, maintain and administer CFx SharePoint sites, document libraries, workflows, permissions structures and information repositories to support effective information management and team collaboration.</li> <li>Maintain the CFx technical library including commissioning procedures, technical specifications, templates, lessons learned, guidance documents and other technical reference materials.</li> <li>Support preparation, revision, formatting, publication and control of job descriptions, procedures, presentations, technical reports, management papers and governance documentation.</li> <li>Coordinate recruitment, onboarding, resource planning, personnel assessment and workforce reporting activities including vacancy tracking, mobilization status, six-month assessments and personnel performance management support requirements.</li> <li>Support administration and coordination of specialist service contracts, framework agreements, change orders, resource call-off requirements and associated contractor performance reporting supporting CFx and Compression project activities.</li> <li>Generate and maintain management reports, dashboards, action trackers, recruitment trackers, resource forecasts, contractor utilization reports and technical status reports supporting CFx and project activities.</li> <li>Coordinate document reviews, approvals, distribution activities and technical communications between CFx teams, project teams, operations personnel and contractors.</li> <li>Provide first-line support and user guidance for CFx SharePoint systems, document repositories, workflows and information management tools.</li> <li>Apply continuous improvement principles to enhance information management processes, SharePoint functionality, technical library governance and team efficiency across Compression project activities.</li> </ul><br><ul> <li>Bachelors Degree in Applied Sciences or Engineering</li> <li>8 years' experience with medium-to-large project commissioning in the Oil &amp; Gas Industry.</li> <li>Experience administering SharePoint sites, document libraries, permissions structures, workflows and information management systems.</li> <li>Experience supporting technical teams through management of procedures, specifications, reports, lessons learned databases and controlled documentation.</li> <li>Experience supporting recruitment, onboarding, manpower reporting and resource planning activities within project or operational environments.</li> <li>Knowledge of commissioning, systems completion, project execution, operational handover and associated project lifecycle phases.</li> <li>Experience coordinating technical documentation, management reports, presentations, governance documentation and project communications</li> <li>Experience with Oil &amp; Gas companies, Contractors, or Service Companies.</li> <li>Expert in reading P&amp;IDs, Datasheets, General Arrangement drawings and procedures.</li> <li>Knowledge in projects execution, engineering, operations, pre-commissioning, commissioning and systems completion.</li> <li>Knowledge in compliance with contract requirements including codes and standards, and contract technical specification compliance.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>