وظائف محلل فني - الخور قطر

<p><strong>Company Description</strong> Mannai Energy is a regional energy services provider supporting industrial facilities and infrastructure projects with technical expertise and reliable field operations. The company offers installation, maintenance, and repair services for mechanical and electrical systems, including heating, ventilation, and air conditioning (HVAC) equipment. Mannai Energy focuses on safety, efficiency, and regulatory compliance across all service activities. Team members work in a collaborative environment with opportunities to develop specialized technical skills and advance within the organization.</p><p><strong>Role Description</strong> The Heating Air Conditioning Technician is a full-time, on-site role based in Ras Laffan. The technician installs, maintains, and repairs HVAC systems, including chillers, air handlers, split units, and package units. Daily responsibilities include diagnosing system issues, performing troubleshooting on mechanical and electrical components, and carrying out scheduled preventive maintenance to ensure optimal performance and energy efficiency. The role involves inspecting and testing equipment, replacing or repairing parts, managing refrigerants in compliance with regulations, and coordinating with supervisors and other trades on site. The technician also maintains accurate service records, follows safety procedures, and supports continuous improvement of maintenance practices.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Candidates should possess strong troubleshooting skills for HVAC systems and related mechanical components.</li><li>Candidates should possess plumbing skills relevant to HVAC installations, condensate drainage, and piping connections.</li><li>Candidates should possess preventive maintenance skills, including routine inspections, cleaning, adjustments, and scheduled servicing.</li><li>Candidates should possess EPA-related knowledge or equivalent refrigerant handling certification, with safe practices for refrigerant recovery and charging.</li><li>Candidates should possess basic to intermediate electricity skills, including reading wiring diagrams, working with control circuits, and using electrical testing tools.</li><li>Technical diploma or certificate in HVAC, Mechanical, or Electrical Technology (or equivalent practical experience) is preferred.</li><li>Experience in industrial or commercial HVAC environments, ideally within energy or petrochemical facilities, is beneficial.</li><li>Ability to read and interpret technical manuals, maintenance procedures, and safety guidelines.</li><li>Strong attention to detail, adherence to safety standards, and capability to work in a team-oriented, on-site environment.</li><li>Willingness to work shifts, overtime, or call-outs as operational needs require.</li></ul>

The <strong>FHE Technician</strong>'s primary responsibility is to perform scheduled and unscheduled maintenance on Fuels assets in accordance with USAF publications and the Performance Work Statement (PWS). Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br><strong>Principal Accountabilities<br><br></strong><ul><li>Retrieves inbound equipment from the loading/unloading freight or holding area. </li><li>Evaluates the overall condition of Fuels assets and other related components and equipment. </li><li>Performs visual inspections and functional checks. </li><li>Cleans and inspects major and minor components when removed from Fuels assets. </li><li>Troubleshoots deficiencies and takes the necessary corrective maintenance repair action. </li><li>Rebuilds engines, fuel nozzles and fuel/air valves. Removes and replaces hoses and air lines. </li><li>Performs reconstitution, replacing all missing or defective components that do not meet technical order specification. </li><li>Performs mechanical, electrical and fuel servicing system repairs. </li><li>Performs hydrostatic tests of fuel dispensing hoses. </li><li>Calibrates gauges and meters used on Fuels assets and other related equipment. </li><li>Documents time sheet/work orders and identifies parts and material being requisitioned. </li><li>Performs corrosion control, this includes cleaning surfaces, sanding defected areas to remove corrosion, cleaning and priming surface, spraying or brushing on base coats of paint. </li><li>Applies preservation materials to protect equipment in storage. </li><li>Prepares Fuels assets for deployments. </li><li>Cleans inside and outside work areas. </li><li>Performs Temporary Duty (TDY) as directed by Amentum Supervisors and Managers. </li><li>Performs other duties as assigned. </li><li>Maintains the battery charging room if applicable. </li><li>Fits and removes batteries on receipt or out-load of Fuels assets. </li><li>Reports worn or broken tools to Fuels supervision and identifies new tool requirements. </li><li>Documents time sheets and work orders. </li><li>Cleans inside and outside work areas. </li><li>Performs other duties as assigned. </li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Must have excellent organizational skills and be able to understand, speak, read and write English at a beginner level. </li><li>Ability to interpret technical publications, maintenance action sheets, safety and environmental instructions. </li><li>Capacity to work effectively with diverse workforce encompassing different cultural backgrounds. </li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license. </li><li>May be required to operate material handling and light to heavy military type vehicles/equipment. </li><li>High School diploma or equivalent required. </li><li>A minimum of two years of hands-on work experience on pumping systems, gasoline and diesel engines required. </li><li>May be exposed to extreme noise from operating equipment. </li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. </li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. </li><li>Must be able to travel domestically and internationally. <br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Formal training to a proficiency level of journeyman in a structured school of mechanical maintenance of fuel pumping systems, to include internal combustible engines and electrical systems is desired.</li></ul>

The <strong>FHE Technician</strong>'s primary responsibility is to perform scheduled and unscheduled maintenance on Fuels assets in accordance with USAF publications and the Performance Work Statement (PWS). Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br><strong>Principal Accountabilities<br><br></strong><ul><li>Retrieves inbound equipment from the loading/unloading freight or holding area. </li><li>Evaluates the overall condition of Fuels assets and other related components and equipment. </li><li>Performs visual inspections and functional checks. </li><li>Cleans and inspects major and minor components when removed from Fuels assets. </li><li>Troubleshoots deficiencies and takes the necessary corrective maintenance repair action. </li><li>Rebuilds engines, fuel nozzles and fuel/air valves. Removes and replaces hoses and air lines. </li><li>Performs reconstitution, replacing all missing or defective components that do not meet technical order specification. </li><li>Performs mechanical, electrical and fuel servicing system repairs. </li><li>Performs hydrostatic tests of fuel dispensing hoses. </li><li>Calibrates gauges and meters used on Fuels assets and other related equipment. </li><li>Documents time sheet/work orders and identifies parts and material being requisitioned. </li><li>Performs corrosion control, this includes cleaning surfaces, sanding defected areas to remove corrosion, cleaning and priming surface, spraying or brushing on base coats of paint. </li><li>Applies preservation materials to protect equipment in storage. </li><li>Prepares Fuels assets for deployments. </li><li>Cleans inside and outside work areas. </li><li>Performs Temporary Duty (TDY) as directed by Amentum Supervisors and Managers. </li><li>Performs other duties as assigned. </li><li>Maintains the battery charging room if applicable. </li><li>Fits and removes batteries on receipt or out-load of Fuels assets. </li><li>Reports worn or broken tools to Fuels supervision and identifies new tool requirements. </li><li>Documents time sheets and work orders. </li><li>Cleans inside and outside work areas. </li><li>Performs other duties as assigned. </li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Must have excellent organizational skills and be able to understand, speak, read and write English at a beginner level. </li><li>Ability to interpret technical publications, maintenance action sheets, safety and environmental instructions. </li><li>Capacity to work effectively with diverse workforce encompassing different cultural backgrounds. </li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license. </li><li>May be required to operate material handling and light to heavy military type vehicles/equipment. </li><li>High School diploma or equivalent required. </li><li>A minimum of two years of hands-on work experience on pumping systems, gasoline and diesel engines required. </li><li>May be exposed to extreme noise from operating equipment. </li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. </li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. </li><li>Must be able to travel domestically and internationally. <br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Formal training to a proficiency level of journeyman in a structured school of mechanical maintenance of fuel pumping systems, to include internal combustible engines and electrical systems is desired.</li></ul>

The<strong> FHE Refueler Mechanic</strong> supervises the reconstitution, preservation and maintenance of all USAF Fuels Support Equipment (FSE) and vehicle assets. Ensures compliance with the applicable USAF mandatory requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br><strong>Principal Accountabilities<br><br></strong><ul><li>Ensures monthly reconstitution, preservation and inspection goals are attained. </li><li>Performs receipt Limited Technical Inspections (LTI) within prescribed guidelines. </li><li>Ensures that the most economic form of repair is performed on all USAF Fuels assets. </li><li>Prioritizes work according to goals and schedules. </li><li>Inspects and prepares USAF Fuels assets for air/land/sea movement. </li><li>Ensures safety practices and housekeeping are maintained to the highest standard. </li><li>Ensures that all tools and equipment are serviceable, accounted for and secured. </li><li>Stores and disposes of all hazardous materials in accordance with Amentum Standard Operating Procedures (SOP). </li><li>Conducts repair parts research to ensure only required repair parts are requested and determines the local availability of required repair parts. </li><li>Inspects, tests, repairs and maintains electrical systems on Fuels assets. </li><li>Uses and interprets wiring diagrams, test equipment and special tools. </li><li>Charges and repairs air conditioning systems. </li><li>Maintains and stores out-load items: wet and dry charged batteries, electrolyte, battery clamps and other required equipment. </li><li>Keeps a stock of charged batteries in accordance with the PWS and as directed by supervision. </li><li>Ensures correct and expeditious completion of work orders. </li><li>Inspects all completed vehicle repairs to ensure quality assurance is maintained. </li><li>Ensures all unserviceable and unused serviceable repair parts are returned to the supply facility. </li><li>Operates, maintains, troubleshoots and Fuels assets. </li><li>Performs Temporary Duty (TDY) within the Area of Responsibility (AOR) as required by US Air Force/Amentum tasking. </li><li>Performs other duties as assigned. </li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Must have outstanding customer service and organizational skill and be able to understand, speak, read and write English at an intermediate level. </li><li>Ability to read and comprehend all required publications required. </li><li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. </li><li>Capacity to work effectively with diverse workforce encompassing different cultural backgrounds. </li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license. </li><li>May be required to operate material handling and light to heavy military type vehicles/equipment. </li><li>High School diploma or equivalent required. </li><li>Minimum five years' experience as a Fuels Technician required. </li><li>May be exposed to extreme noise from operating equipment. </li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. </li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. </li><li>Must be able to travel domestically and internationally. <br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Four years supervisory experience preferred. </li><li>Formal training in refueling maintenance is desired. </li><li>Experience supervising a diverse international workforce is desired.</li></ul>

The<strong> FHE Refueler Mechanic</strong> supervises the reconstitution, preservation and maintenance of all USAF Fuels Support Equipment (FSE) and vehicle assets. Ensures compliance with the applicable USAF mandatory requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br><strong>Principal Accountabilities<br><br></strong><ul><li>Ensures monthly reconstitution, preservation and inspection goals are attained. </li><li>Performs receipt Limited Technical Inspections (LTI) within prescribed guidelines. </li><li>Ensures that the most economic form of repair is performed on all USAF Fuels assets. </li><li>Prioritizes work according to goals and schedules. </li><li>Inspects and prepares USAF Fuels assets for air/land/sea movement. </li><li>Ensures safety practices and housekeeping are maintained to the highest standard. </li><li>Ensures that all tools and equipment are serviceable, accounted for and secured. </li><li>Stores and disposes of all hazardous materials in accordance with Amentum Standard Operating Procedures (SOP). </li><li>Conducts repair parts research to ensure only required repair parts are requested and determines the local availability of required repair parts. </li><li>Inspects, tests, repairs and maintains electrical systems on Fuels assets. </li><li>Uses and interprets wiring diagrams, test equipment and special tools. </li><li>Charges and repairs air conditioning systems. </li><li>Maintains and stores out-load items: wet and dry charged batteries, electrolyte, battery clamps and other required equipment. </li><li>Keeps a stock of charged batteries in accordance with the PWS and as directed by supervision. </li><li>Ensures correct and expeditious completion of work orders. </li><li>Inspects all completed vehicle repairs to ensure quality assurance is maintained. </li><li>Ensures all unserviceable and unused serviceable repair parts are returned to the supply facility. </li><li>Operates, maintains, troubleshoots and Fuels assets. </li><li>Performs Temporary Duty (TDY) within the Area of Responsibility (AOR) as required by US Air Force/Amentum tasking. </li><li>Performs other duties as assigned. </li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Must have outstanding customer service and organizational skill and be able to understand, speak, read and write English at an intermediate level. </li><li>Ability to read and comprehend all required publications required. </li><li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. </li><li>Capacity to work effectively with diverse workforce encompassing different cultural backgrounds. </li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license. </li><li>May be required to operate material handling and light to heavy military type vehicles/equipment. </li><li>High School diploma or equivalent required. </li><li>Minimum five years' experience as a Fuels Technician required. </li><li>May be exposed to extreme noise from operating equipment. </li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. </li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. </li><li>Must be able to travel domestically and internationally. <br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Four years supervisory experience preferred. </li><li>Formal training in refueling maintenance is desired. </li><li>Experience supervising a diverse international workforce is desired.</li></ul>

The<strong> FHE Refueler Mechanic</strong> supervises the reconstitution, preservation and maintenance of all USAF Fuels Support Equipment (FSE) and vehicle assets. Ensures compliance with the applicable USAF mandatory requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br><strong>Principal Accountabilities<br><br></strong><ul><li>Ensures monthly reconstitution, preservation and inspection goals are attained. </li><li>Performs receipt Limited Technical Inspections (LTI) within prescribed guidelines. </li><li>Ensures that the most economic form of repair is performed on all USAF Fuels assets. </li><li>Prioritizes work according to goals and schedules. </li><li>Inspects and prepares USAF Fuels assets for air/land/sea movement. </li><li>Ensures safety practices and housekeeping are maintained to the highest standard. </li><li>Ensures that all tools and equipment are serviceable, accounted for and secured. </li><li>Stores and disposes of all hazardous materials in accordance with Amentum Standard Operating Procedures (SOP). </li><li>Conducts repair parts research to ensure only required repair parts are requested and determines the local availability of required repair parts. </li><li>Inspects, tests, repairs and maintains electrical systems on Fuels assets. </li><li>Uses and interprets wiring diagrams, test equipment and special tools. </li><li>Charges and repairs air conditioning systems. </li><li>Maintains and stores out-load items: wet and dry charged batteries, electrolyte, battery clamps and other required equipment. </li><li>Keeps a stock of charged batteries in accordance with the PWS and as directed by supervision. </li><li>Ensures correct and expeditious completion of work orders. </li><li>Inspects all completed vehicle repairs to ensure quality assurance is maintained. </li><li>Ensures all unserviceable and unused serviceable repair parts are returned to the supply facility. </li><li>Operates, maintains, troubleshoots and Fuels assets. </li><li>Performs Temporary Duty (TDY) within the Area of Responsibility (AOR) as required by US Air Force/Amentum tasking. </li><li>Performs other duties as assigned. </li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Must have outstanding customer service and organizational skill and be able to understand, speak, read and write English at an intermediate level. </li><li>Ability to read and comprehend all required publications required. </li><li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. </li><li>Capacity to work effectively with diverse workforce encompassing different cultural backgrounds. </li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license. </li><li>May be required to operate material handling and light to heavy military type vehicles/equipment. </li><li>High School diploma or equivalent required. </li><li>Minimum five years' experience as a Fuels Technician required. </li><li>May be exposed to extreme noise from operating equipment. </li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. </li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. </li><li>Must be able to travel domestically and internationally. <br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Four years supervisory experience preferred. </li><li>Formal training in refueling maintenance is desired. </li><li>Experience supervising a diverse international workforce is desired.</li></ul>

<strong>Purpose and Scope: <br><br></strong>Structures Technician Sub-Amp acts as a subject matter expert to advising AMP Managers and other operations and engineering staff with the development of overall operation, maintenance, repair, compliance, sustainment, and recapitalization of facility-related mechanical and HVAC assets and associated FYDP+3 requirements identification. Responsible for the asset lifecycle management portfolio encompassing the building's structure, envelope, and interior finishes. This position will be in support of the Air Force Contract Augmentation Program (AFCAP) and it is located at Al Udeid Air Base (AUAB), Doha, Qatar.<br><br><strong>Essential Responsibilities:<br><br></strong><ul><li>Subject matter expertise lends itself to advising the AMP Managers, the Operations Flight, and Engineering Flight with recommendations on how best to invest in the systems under their purview. </li><li>Provide technical guidance to support the Facilities Structure &amp; Finishes Sub-AMP functions. </li><li>Responsible for the asset lifecycle management portfolio encompassing the building's structure, envelope, and interior finishes. This includes foundations, structural framing, roofing, exterior walls, windows, doors, interior walls, flooring, ceilings, and paint. </li><li>Will advise and assist with the development of the overall inspection, maintenance, repair, sustainment, and recapitalization plan for these assets, ensuring structural integrity, weather tightness, and aesthetic quality while also supporting the identification of FYDP+3 requirements. </li><li>Works closely with the Facilities AMP and Sub-AMP, if required. </li><li>Assists with the pre-design work for new construction, renovations and improvement projects for real property facilities. </li><li>Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards. </li><li>Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers. </li><li>Assists with the development of cost estimates and time schedules. </li><li>Prepares necessary correspondence, technical reports, contract documents, fact sheets and status report and prepares final construction drawings suitable for obtaining qualified bids from Contractors. </li><li>Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. </li><li>Acts as Alternate BUILDER Point of Contact (POC). </li><li>Manage and administer functions of the BUILDER database to ensure optimum access and usage of the database, and to ensure the accuracy, integrity, and currency of the data. </li><li>Input and provide quality assurance of all necessary database entries in conjunction with other squadron flights. </li><li>Inventory and enter RPIE into the BUILDER database. </li><li>Maintain the BUILDER facility inventory 100% in synchronization with the Air Force Accountable Property System of Record (APSR), NexGen IT. </li><li>Ensure the BUILDER contains only one facility record per Real Property Unique Identifier (RPUID). </li><li>Ensure all facilities with RPA Type equal to B, S, or LS have all required systems inventoried in BUILDER. </li><li>Identify, track, and inventory all facilities with no RPUID assigned until such time as the AFCEC assigns a unique RPUID. </li><li>Maintain, in a current status, the list of facilities awaiting RPUID assignment while waiting for the AFCEC to provide unique RPUIDs for those facilities. </li><li>Maintain the existing detailed inventory of all facilities in the BUILDER and shall update the detailed inventory as needed due to completion of work or identification of inventory errors. </li><li>Update component-section assessments (including barcodes if applicable). </li><li>Provide condition assessment capability for all facility systems. <br><br></li></ul><strong>Minimum Position Knowledge, Skills and Abilities Required:<br><br></strong><ul><li>Technicians shall have an equivalent of an Air Force minimum 5 level or equal and 5 years’ experience in their respective trades. </li><li>Required to complete AFIT WENG 200 – Scoping &amp; Estimating, AFIT WENG 440, AFIT WMGT 231 – SMS Builder Level 2 (Assessor Rights), &amp; AFIT WMGT 417 – Activity Management. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date. </li><li>Prior R&amp;O experience and NexGen experience preferred. </li><li>High school diploma or equivalent training &amp; experience. </li><li>Experience in the use of documents relating to the development of projects, contracting, and construction is necessary. </li><li>Computer literate; can use Microsoft Office and Project, etc. </li><li>Ability to communicate, read, and write English is required. </li><li>Strong ability to work as a member of a diverse, dynamic team. </li><li>Outstanding problem-solving skills and sound judgment. </li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance. Must be a USN to fill this position. </li><li>Possess a valid driver’s license or international driver’s license and US passport. </li><li>Prior overseas government contracting experience preferred. <br><br></li></ul><strong>Work Environment, Physical Demands, and Mental Demands:<br><br></strong><ul><li>Able to lift, carry, and push supplies and boxes up to 50 pounds. </li><li>Living and working conditions at the assignment location could be remote and uncomfortable. </li><li>Long hours, exposure to weather and hazardous conditions possible. <br><br></li></ul><strong>Other Responsibilities<br><br></strong><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.<br><br><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.<br><br><strong>Procedure Compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.

<p><strong><em>Important: Please apply only if you are currently Qatar MMUP/UPDA GRADE A certified Engineer with the residency.</em></strong></p><p><br></p><p><strong><em>Applications that do not meet this mandatory requirement will not be considered.</em></strong></p><p><br></p><p><strong><em>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA GRADE A registration.</em></strong></p><p><br></p><p><strong>Who We Are:</strong></p><p><br></p><p>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.</p><p><br></p><p><strong>Global Projects and the Energy of the Future</strong>:</p><p><br></p><p>At TR, we develop projects in Oil &amp; Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.</p><p><br></p><p><strong>Specific functions:</strong></p><p><br></p><ul><li>Ensuring compliance with objectives established in the development and execution, at the expected time and with the required quality, of the works related to the Requisitions of which it is Originator:</li></ul><p><br></p><p>Technical level required.</p><p>Scope of work defined.</p><p>Budget of hours assigned.</p><p>Corporate and Project procedures.</p><p>Schedule</p><p><br></p><ul><li>Responsible of the complete development of the cycle of “Technical Purchase” of the assigned equipment.</li><li>Full cooperation with the Client (response of comments at the expected time and with the required quality), other Departments (Technical Office, Process, Procurement, Inspection, Projects ...), making every effort to provide the technical information needed to develop their own work.</li><li>As Requisitions Originator, sufficient capacity and hierarchy to request and demand the necessary collaboration at the appropriate level of technical quality and schedule to the other Departments with influence into the equipment which it is ultimately responsible.</li><li>Attendance at Project meetings when required.</li><li>Review assigned activities and Include information about activities completed in TAES application in weekly basis.</li><li>Identify technical and economical improvements opportunities in their work area and propose them.</li><li>Propose Lessons Learned and Value Engineering actions.</li><li>Take responsibility of the own professional growth, taking advantage of any learning opportunity.</li><li>Proper use of the different computer tools:</li></ul><p><br></p><p>Smart Materials (Marian).</p><p>Document Management System (Documentum).</p><p>eVDDR &amp; eGesDoc.</p><p>IAP.</p><p>TAFS.</p><p>Lessons Learned System.</p><p><br></p><p><strong>Requirements:</strong></p><p><br></p><p>Valid <strong>MMUP/UPDA First Category Engineer certification/registration.</strong></p><p><br></p><ul><li>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;</li><li>Bachelor’s or Master's Degree in Engineering in the relevant discipline;</li><li>Strong relevant Engineering and Project experience;</li><li>Previous experience working on major projects in Qatar is highly preferred;</li><li>Good knowledge of Qatar Engineering standards, regulations, and Project requirements;</li><li>Strong communication, coordination, and technical skills.</li></ul><p><br></p>

<p><strong><em>Important: Please apply only if you are currently Qatar MMUP/UPDA GRADE A certified with the residency.</em></strong></p><p><br></p><p><strong><em>Applications that do not meet this mandatory requirement will not be considered.</em></strong></p><p><br></p><p><strong><em>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA Grade A registration.</em></strong></p><p><br></p><p><strong>Who We Are:</strong></p><p><br></p><p>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.</p><p><br></p><p><strong>Global Projects and the Energy of the Future</strong>:</p><p><br></p><p>At TR, we develop projects in Oil &amp; Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.</p><p><br></p><p><strong>Specific functions:</strong></p><p><br></p><p><strong><em>Technical:</em></strong></p><p><br></p><ul><li>Calculating, specifying, designing, selecting the different pieces of equipment under his/her responsibility.</li><li>Prepare C&amp;E diagrams, Control Narratives, Vessels sketches.</li><li>P&amp;IDs revision and comments.</li><li>Participation in HAZOP and SIL studies: implement and close the Actions Items corresponding to Instrumentation Discipline.</li><li>Preparation of Requisitions for Inquiries.</li><li>Carry out Technical Tabulations.</li><li>Interact with vendors (meetings and correspondence) intending to resolve all technical clarifications.</li><li>Preparation of Vendor Selection Reports for the awarding of the Technical Bid.</li><li>Preparation of Requisitions for Purchase.</li><li>Approve and follow up on information supplied by vendors, be it supplied by Instrumentation Discipline or by other disciplines.</li><li>If needed, and base on Department Manager criterion, Specialist can support with Construction and Commisioning phases, moving at Site.</li><li>For all PO’s under his responsibility, ensure that corresponding targets are achieved, regarding to:</li></ul><p>Technical Level.</p><p>Men Hours Budget.</p><p>Quality Levels and Procedural Compliance (PDTs, ITGs).</p><p>Planning.</p><p>3D model review and isometric checking.</p><p><br></p><p><strong><em>Management:</em></strong></p><p><br></p><ul><li>Coordinating exchange of required information with other disciplines (Piping, Electricity, Mechanical, Vessels; Civil; Construction; Process, Purchasing and Inspection)</li><li>Supervise Purchase Orders and Design activities under his/her responsibility, in order to comply with established milestones regarding the submittal of information and equipment delivery.</li><li>Lessons Learned.</li><li>Notification of Design Changes, having a log of Changes for requisitions under his/her responsibility.</li><li>Coordinating, taking into account the Project Schedule, the data sheets issue, technical tabulations and activities related with requisition under his/her responsibility, having the log weekly updated.</li><li>Detecting situations that interfere with the team work, reporting back to the Discipline Leader, for the prompt implementation of corrective actions.</li><li>Using work tools properly and correctly</li><li>Maintain updated the electronic filing system “Documentum” according with the Project procedures.</li><li>Maintain updated the List of holds.</li></ul><p><br></p><p><strong>Requirements:</strong></p><p><br></p><p>Valid <strong>MMUP/UPDA First Category Engineer certification/registration.</strong></p><p><br></p><ul><li>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;</li><li>Bachelor’s or Master's Degree in Engineering in the relevant discipline;</li><li>Strong relevant Engineering and Project experience;</li><li>Previous experience working on major projects in Qatar is highly preferred;</li><li>Good knowledge of Qatar Engineering standards, regulations, and Project requirements;</li><li>Strong communication, coordination, and technical skills.</li></ul><p><br></p>

<p><strong>Job Summary</strong></p><p>The IT Systems Engineer is responsible for the administration, maintenance, and support of the company's IT infrastructure, enterprise applications, SAP environment, and network systems. The role also provides basic technical support for IP-based CCTV and security systems, working closely with specialized vendors when required. The successful candidate will ensure the reliability, security, and availability of all IT systems while supporting business operations and digital transformation initiatives.</p><br><p>A valid <strong>UPDA Certificate</strong> is mandatory.</p><br><p><strong>Key Responsibilities</strong></p><p><strong>SAP & Business Applications</strong></p><ul><li><p>Provide first-line technical support for SAP systems (SAP Business One, SAP ERP, or SAP S/4HANA).</p></li><li><p>Coordinate with SAP consultants and vendors to troubleshoot issues, perform upgrades, and implement enhancements.</p></li><li><p>Assist users with SAP-related technical issues and system access.</p></li><li><p>Monitor SAP system performance and recommend improvements.</p></li></ul><br><p><strong>Technical Support</strong></p><ul><li><p>Provide Level 2/Level 3 technical support for hardware, software, printers, and enterprise applications.</p></li><li><p>Diagnose and resolve network, server, and desktop issues.</p></li><li><p>Support end users with software installations and troubleshooting.</p></li></ul><br><p><strong>CCTV & Security Systems</strong></p><ul><li><p>Possess basic knowledge of IP-based CCTV systems and related network infrastructure.</p></li><li><p>Assist in the installation, configuration, monitoring, and troubleshooting of CCTV systems.</p></li><li><p>Coordinate with external vendors for CCTV maintenance, upgrades, and preventive maintenance.</p></li><li><p>Support basic operation of Network Video Recorders (NVRs), IP cameras, and Video Management Systems (VMS).</p></li><li><p>Ensure CCTV connectivity across the company's network infrastructure.</p></li></ul><br><p><strong>Cybersecurity</strong></p><ul><li><p>Implement cybersecurity best practices to protect company systems.</p></li><li><p>Monitor antivirus, endpoint security, and firewall performance.</p></li><li><p>Manage user access rights and system permissions.</p></li></ul><br><p><strong>Projects & Documentation</strong></p><ul><li><p>Participate in IT infrastructure, SAP, and digital transformation projects.</p></li><li><p>Coordinate with vendors and internal stakeholders during project implementation.</p></li><li><p>Maintain accurate documentation for systems, configurations, licenses, and procedures.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications</strong></p><ul><li><p>Bachelor’s degree in computer engineering, Information Technology, Computer Science, Electronics Engineering, or a related engineering discipline.</p></li><li><p>Valid <strong>UPDA Certificate</strong> is mandatory.</p></li><li><p>Minimum <strong>5 years</strong> of relevant experience in IT infrastructure and systems administration.</p></li><li><p>Hands-on experience supporting SAP Business One, SAP ERP, or SAP S/4HANA.</p></li><li><p>Basic knowledge of IP CCTV systems and security technologies.</p></li><li><p>Experience with Microsoft Windows Server and Microsoft 365 administration.</p></li><li><p>Strong understanding of TCP/IP networking and enterprise IT infrastructure.</p></li><li><p>Excellent troubleshooting and analytical skills.</p></li><li><p>Good communication and interpersonal skills.</p></li><li><p>Valid Qatar Driving License is an advantage.</p></li></ul><br><p><strong>Technical Skills</strong></p><ul><li><p>SAP Business One / SAP ERP / SAP S/4HANA</p></li><li><p>Microsoft Windows Server</p></li><li><p>Microsoft 365 Administration</p></li><li><p>Active Directory</p></li><li><p>Azure (preferred)</p></li><li><p>VMware or Hyper-V</p></li><li><p>TCP/IP Networking</p></li><li><p>Routing & Switching</p></li><li><p>VLAN Configuration</p></li><li><p>Firewall Administration</p></li><li><p>Power BI (preferred)</p></li><li><p>SharePoint (preferred)</p></li><li><p>Basic IP CCTV Systems</p></li></ul><br><p><strong>Key Competencies</strong></p><ul><li><p>Strong analytical and troubleshooting skills</p></li><li><p>Knowledge of enterprise IT infrastructure</p></li><li><p>SAP system support</p></li><li><p>Basic understanding of CCTV and security systems</p></li><li><p>Problem-solving and critical thinking</p></li><li><p>Communication and customer service skills</p></li><li><p>Time management and organization</p></li><li><p>Ability to work independently and collaboratively</p></li><li><p>Commitment to continuous learning and professional development</p></li></ul>

<p>Technical Knowledge :</p><p>-Electrical LV systems: MDB, SMDB, DB, cabling, containment, earthing, lighting and power..</p><p>-ELV systems: Fire Alarm, CCTV, Access Control, Data/Telephone, BMS etc.</p><p>-Plumbing: Water supply, drainage, sewage and stormwater.</p><p>-HVAC systems: DX, VRF/VRV, chilled water, AHUs, FCUs, ventilation and exhaust.</p><p>-Fire Fighting: Sprinkler, hose reel, fire pump and associated systems.</p><p>-Testing & Commissioning.</p><p>-MEP coordination with architectural, structural and civil works.</p><p>-Builders' works associated with MEP.</p><p>-Reading IFC drawings, specifications and BOQ.</p><p>-Shop drawings and coordinated MEP drawings.</p><p>-Material submittals and technical datasheets.</p><p>-Method Statements and ITPs.</p><p>-RFIs and technical queries.</p><p>-As-built drawings and O&M manuals.</p><br><p>Software :</p><p>-AutoCAD – essential</p><p>-MS Office – essential</p><p>-Revit MEP – preferred</p><br><p>Qatar Authority Coordination :</p><p>Should understand and coordinate requirements involving, as applicable:</p><p>-KAHRAMAA — electricity and water</p><p>-Qatar Civil Defence / MOI — Fire & Life Safety</p><p>-Ashghal — where infrastructure/public works interfaces are involved</p><p>-Municipality/building permit requirements</p><p>-Telecom/service providers where applicable</p><p><strong>Desired Candidate Profile</strong></p><p>Education :</p><p>-Bachelor’s Degree in Mechanical Engineering or Electrical Engineering from a recognized university.</p><p>-Engineering degree/certificates should be attested where required in Qatar.</p><p>-Registration with the relevant Qatar engineering/professional registration authority may be required depending on the project, consultant, position and contractual requirements. Ashghal project documentation, for example, has required project engineers to be professionally registered in Qatar.</p><br><p>Experience :</p><p>-Minimum 5–8 years total experience in building/construction MEP works.</p><p>Previous experience in villas, residential/commercial buildings, hotels or similar projects depending on your company scope.</p>

<p><strong><em>Important: Please apply only if you are currently Qatar MMUP/UPDA GRADE A certified with the residency.</em></strong></p><p><br></p><p><strong><em>Applications that do not meet this mandatory requirement will not be considered.</em></strong></p><p><br></p><p><strong><em>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA GRADE A registration.</em></strong></p><p><br></p><p><strong>Who We Are:</strong></p><p><br></p><p>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.</p><p><br></p><p><strong>Global Projects and the Energy of the Future</strong>:</p><p><br></p><p>At TR, we develop projects in Oil &amp; Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.</p><p><br></p><p><strong>Specific functions:</strong></p><p><br></p><p><strong><em>Technical:</em></strong></p><p><br></p><ul><li>Collaborate with the team member integration.</li><li>Analyze and implement contractual documentation and normative</li><li>To develop following activities for Equipment and Electrical material under its responsibility:</li></ul><p>Sizing Study</p><p>Technical Specifications</p><p>Requisitions</p><p>MTO</p><p>Technical Bid Evaluation</p><p>Follow-up to the purchase orders to comply with the milestones related to information and equipment delivery.</p><p>Coordinate information and requirements with disciplines directly related to Electrical Department (Purchasing, Inspection, Projects).</p><ul><li>To supervise and participate in the team work performance as guideline by Electrical team Leader.</li><li>To assure properly use of the management tools:</li></ul><p>SmartPlant Materials (Marian).</p><p>Document Management System (Documentum).</p><p>VDDR &amp; IAP</p><p><br></p><p><strong><em>Additional to above activities, to support during proposal development:</em></strong></p><p><br></p><ul><li>Collaborate with Cost estimation for proposals.</li><li>Development of MTO for Equipment and material Installations</li><li>To prepare deviations and clarifications lists</li><li>Design Management:</li><li>Collaborate with Team leader with team members integration</li><li>To identify difficulties during the work performance and report to Team leader in order to be solved.</li><li>To share information for proper project performance.</li></ul><p><br></p><p><strong>Requirements:</strong></p><p><br></p><p>Valid <strong>MMUP/UPDA First Category Engineer certification/registration.</strong></p><p><br></p><ul><li>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;</li><li>Bachelor’s or Master's Degree in Engineering in the relevant discipline;</li><li>Strong relevant Engineering and Project experience;</li><li>Previous experience working on major projects in Qatar is highly preferred;</li><li>Good knowledge of Qatar Engineering standards, regulations, and Project requirements;</li><li>Strong communication, coordination, and technical skills.</li></ul><p><br></p>

<ul><li><p><strong><u>Operations Management</u></strong></p><ul><li><p>Supervise and coordinate industrial cleaning projects including tank cleaning, sludge removal, heat exchanger cleaning, pipeline flushing, and confined space entry operations.</p></li><li><p>Ensure compliance with HSE standards, ISO, and local regulatory requirements.</p></li><li><p>Monitor daily operations, allocate manpower, and manage equipment utilization (Hydro Jetting, Super Sucker, vacuum trucks, etc.).</p></li></ul></li><li><p><strong><u>Technical Expertise</u></strong></p><ul><li><p>Provide technical guidance on cleaning methodologies for storage tanks, separators, reactors, boilers, and heat exchangers.</p></li><li><p>Evaluate sludge characterization and recommend safe disposal/recycling methods.</p></li><li><p>Support troubleshooting of cleaning challenges in oil & gas and petrochemical facilities.</p></li></ul></li><li><p><strong><u>Client & Stakeholder Management</u></strong></p><ul><li><p>Liaise with clients, contractors, and regulatory authorities to ensure smooth project execution.</p></li><li><p>Prepare technical proposals, work scopes, and cost estimates for tenders and ongoing projects.</p></li><li><p>Maintain strong client relationships to secure repeat business.</p></li></ul></li><li><p><strong><u>Team Leadership</u></strong></p><ul><li><p>Train and mentor supervisors, technicians, and operators in safe and efficient cleaning practices.</p></li><li><p>Conduct toolbox talks, safety drills, and performance evaluations.</p></li><li><p>Promote a culture of continuous improvement and operational excellence.</p></li></ul></li><li><p><strong><u>Reporting & Documentation</u></strong></p><ul><li><p>Prepare daily progress reports, incident reports, and project closure documentation.</p></li><li><p>Track KPIs such as turnaround time, resource efficiency, and safety compliance.</p></li><li><p>Support management in CAPEX/OPEX planning and budgeting.</p></li></ul></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Chemical Engineering, Environmental Engineering, or related discipline.</p></li><li><p>Minimum 6–8 years of experience in industrial cleaning/waste management, with at least 2-3 years in supervisory or assistant managerial role.</p></li><li><p>Strong knowledge of:</p><ul><li><p>Tank cleaning, sludge removal, heat exchanger cleaning, pipeline descaling</p></li><li><p>Hydro Jetting, Super Sucker, vacuum trucks, chemical cleaning methods</p></li><li><p>Oil & Gas and Petrochemical plant operations in GCC</p></li></ul></li><li><p>Familiarity with HSE regulations, confined space entry, and hazardous waste handling.</p></li><li><p>Strong knowledge of rotating equipment, pumps, compressors, and waste management systems.</p></li><li><p>Excellent communication, leadership, and client management skills.</p></li></ul><br><p><strong><u>Preferred Certifications</u></strong></p><ul><li><p>NEBOSH / IOSH (Health & Safety)</p></li><li><p>Confined Space Entry & Rescue</p></li><li><p>ISO 14001 / ISO 45001 awareness</p></li></ul><p><strong><u>Competencies</u></strong></p><ul><li><p>Strong analytical and problem-solving skills</p></li><li><p>Ability to manage multiple projects under tight deadlines</p></li><li><p>Risk awareness and proactive safety mindset</p></li><li><p>Team leadership and cross-functional collaboration</p></li><li><p>Client-focused with commercial acumen</p></li></ul>

<ul><li>Accurately measure and interpret architectural drawings, blueprints, and specifications to provide detailed joinery estimates.</li><li>Collaborate closely with clients, architects, and project managers to understand project requirements and design aspirations.</li><li>Develop detailed 3D models and technical drawings of joinery elements using CAD software, ensuring precision and functionality.</li><li>Source and analyze material costs, labor, and overheads to produce competitive and profitable quotations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possession of a relevant qualification in Joinery, Woodworking, Design, or a related technical field.</li><li>A minimum of 5 years of proven experience in joinery estimating and/or design within the construction or furniture industry.</li><li>Proficiency in industry-standard CAD software (e.g., AutoCAD, SketchUp, SolidWorks) for design and modeling.</li><li>Strong understanding of joinery techniques, materials, and construction methods.</li></ul>

<br><ul><li><p>As a Subject Matter Expert (SME), the Rigging Foreman [Workshop & Project Rigging & Movement Logistics] provides the technical & technological problem-solving ability of production engineering process and planning abilities in order to lead work teams and control production process for material handling, movement and coordination of piping systems and their components between workshops. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing safe material lifts and movements of piping systems between workshops and projects.</p></li><li><p>Specialize for critical lifting and rigging activities including arranging of crane and forklift service.</p></li><li><p>Responsible for all pipe shop & onboard piping logistics such as pipe and material movements.</p></li><li><p>Leads a rigging group, that ensure loads are secure, lifted according to yard safety standards</p></li><li><p>Coordinates with crane operator to ensure work schedules are not interrupted. All crane lifts need to ensure materials are on location before work starts.</p></li><li><p>Coordinate for forklift operation to shift pipes.</p></li><li><p>Coordinate with Production Engineer (in charge) for sending pipe for coating (blast/paint/galvanize)</p></li><li><p>Coordinate with transport section to arrange transport for outside yard operations i.e., galvanizing and afloat service.</p></li><li><p>Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way.</p></li><li><p>Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate</p></li><li><p>Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt & Project Postmortem) after completion of vessel</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical, or equivalent working experience and Qualified as Rigging Supervisor in Shipyard and Offshore & Onshore Projects. Experience: At least 8 years’ relevant working experience Lead in Shipyard Rigging & Lifting. &nbsp;(at least 3 years of experience as Assistant Rigging Foreman role).</p>

<ul><li>Conduct detailed site assessments and risk analyses prior to lifting operations to ensure safety and compliance with regulations.</li><li>Design and specify lifting plans, including equipment selection and load calculations, tailored to project requirements.</li><li>Oversee the assembly and disassembly of lifting equipment, ensuring all components are installed correctly and safely.</li><li>Collaborate with project managers and site supervisors to coordinate lifting operations and minimize downtime.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related field is preferred for a strong technical foundation.</p></li><li><p>���� 03 ������ �������������, ��������� ��������� ������ (��) �� ���������.</p></li><li><p>Professional certification such as a Lifting Engineer or Rigging Certification is highly desirable to validate expertise.</p></li><li><p>Minimum of 10 years of relevant work experience in lifting operations or engineering, demonstrating a solid understanding of the field.</p></li><li><p>Experience in the construction, oil and gas, or heavy industry sectors is essential for familiarity with specific lifting challenges.</p></li></ul>

<strong>Purpose and Scope: <br><br></strong>Perform drafting work compiling and organizing engineering and drafting data, designing structures and recommending design changes, and preparing specifications and estimates. Additional duties include surveying, GIS/GeoBase updates and maintenance. This position is in support of the Air Force Contract Augmentation Program (AFCAP) and is located at Al Udeid Air Base, Doha, Qatar.<br><br><strong>Essential Responsibilities:<br><br></strong><ul><li>Create and print custom maps via Defense Area Printing Service (DAPS) or other Government-directed system upon the request of the Customer. Save the maps to the Government IDMS or other media as requested. </li><li>Provide engineering surveys for facility projects, construction layout, utility location, and disaster response (e.g., topography, boundary, construction, and route). </li><li>Conduct in-the-field land surveys to collect geospatial data portraying the installation’s built and natural infrastructure to update utility, infrastructure, and facility MDSs. </li><li>Create and maintain technical drawings, geospatial data, and maps. </li><li>Provide engineering assistance and drafting support to customers, engineers, craftsmen, in-house projects and work tasks, and as requested by the Customer. </li><li>Establish and maintain a repository of technical reference material, plans, and specifications for facilities that is easily accessible to the work force engaged in engineering, operations, and maintenance. </li><li>Compile and organize project documentation, including cost estimates, plans, specifications, statements of work, bills of materials, time schedules, submittal registers, and A&amp;E statements of work (SOW), as provided by the Government. </li><li>Utilize GeoBase as the Air Force program for installation GIS, utilizing an enterprise GIS geared toward meeting Air Force civil engineering and mission requirements for facilities management. Perform GIS and GeoBase activities IAW DoDI 8130.01, Installation Geospatial Information and Services (IGI&amp;S), DAFI 32-10112, IGI&amp;S, DAF GeoBase Program Guidance and Policies, AFCENT GeoBase Program Guidance, and AFCEC Geospatial Integration Office program management. </li><li>Comply with GeoBase Common Installation Picture (CIP), Mission Data Set (MDS), Mission Data Layers (MDL) control documents, and the Spatial Data Standards for Facilities, Infrastructure, and Environment (SDSFIE) Air Force Adaptation specifications, data quality requirements, and reporting standards. </li><li>Provide updated CIP maps to the COR annually or when there’s changes to infrastructure on the installation (i.e., new buildings/roads, demolished buildings/roads, or airfield changes), in both printed and electronic formats, with quantities and dimensions as requested by the Government. </li><li>Document and maintain spatially accurate and georeferenced digital facility floor plans, as required by the COR, consistent with the Drawing of Record (DoR) and/or Space Use Data Set (SUDS) guidance IAW the AFCEC Facility Space Planning &amp; Optimization Management Playbook or local procedures (as determined by the COR). Employ industry-standard methods, including 360-degree digital scans and photographs, to achieve comprehensive, accurate, and up-to-date documentation of facility interiors and exteriors. </li><li>Perform surveys for airfield waivers, line-of-sight issues, topographic mapping, parcel boundaries, locations of existing construction and layouts of new facilities, to meet engineering requirements and related services (e.g., topographic surveys, static Global Positioning System (GPS), Real-Time Kinematic (RTK), control surveys, and boundary surveys) using Government-provided equipment utilizing survey and resource grade GPS, Range Finders, and Total Stations to perform surveys, and save the survey data within the GIS database. </li><li>Update and maintain installation CIP, IDP, District Plans, Component plans and other MDSs and MDLs spatial data to accurately represent “ground truth” while also capturing installation spatial data requirements as directed by the Customer. </li><li>Edit, maintain and add new GIS data within the Air Force System of Record (GEOMAP), utilizing the ESRI ArcGIS Pro software platform or AutoCAD software as directed by the Customer. </li><li>Meet with installation subject matter experts for each MDS/MDL to verify accurate spatial and attribute data and provide timely updates when presented with discrepancies. </li><li>Maintain, within a government database as designated by the Government, as-built drawings for downrange facilities and infrastructure. </li><li>Perform other surveying, drafting and GIS/GeoBase duties as assigned. <br><br></li></ul><strong>Minimum Position Knowledge, Skills and Abilities Required:<br><br></strong><ul><li>Must have at least three (3) years of experience in surveying and drafting and at least one (1) year of experience (within three years) with current versions of AutoCAD and GIS software. </li><li>Must be proficient in creating and maintaining technical drawings, geospatial data, and maps. </li><li>Must have familiarity with all tools and techniques of survey to include: differential leveling, Engineering Data Management/Data Collectors, and GPS equipment usage (preferably Trimble equipment) and associated download software. </li><li>Must be capable of creating or updating space usage information contained in SUDS. </li><li>Preference will be given to individuals who have worked on US Government and Military domestic and international projects. </li><li>Experience in the use of documents relating to the development of projects, contracting, and construction is necessary. </li><li>Must have knowledge of principles of project design reviews, GIS/GeoBase Updates &amp; Maintenance, surveying services and other administrative functions. </li><li>Proficient in AutoCAD 2025 or newer and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution. </li><li>Excellent communications, effective leadership and interpersonal skills. </li><li>Computer literate; can use Microsoft Office and Project, etc. </li><li>Strong ability to work and lead as a member of a diverse, dynamic team. </li><li>Outstanding problem-solving skills and sound judgment. </li><li>Must be a USN to fill this position. </li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance. </li><li>Possess a valid state issued driver’s license or international driver’s license and passport. </li><li>Prior overseas government contracting experience preferred. <br><br></li></ul><strong>Work Environment, Physical Demands, and Mental Demands:<br><br></strong><ul><li>Must possess planning/organizing skills and must be able to work under deadlines. </li><li>Involves work typical of office environment with no unusual hazards, occasional lifting to 20 pounds. </li><li>Constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, constant mental alertness. </li><li>Must possess planning/organizing skills and must be able to work under deadlines. <br><br></li></ul><strong>Other Responsibilities<br><br></strong><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.<br><br><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.<br><br><strong>Procedure Compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.

<br><ul><li><p>Assist in preparing concept designs, space planning, and interior layout proposals.</p></li><li><p>Develop detailed joinery and fit-out shop drawings using AutoCAD or similar CAD software.</p></li><li><p>Prepare 3D models and renderings using SketchUp, 3ds Max, or other visualization software.</p></li><li><p>Review architectural and interior design drawings to ensure compatibility with joinery requirements.</p></li><li><p>Produce detailed drawings for custom furniture, cabinetry, wardrobes, kitchens, doors, wall paneling, ceilings, counters, and other joinery items.</p></li><li><p>Coordinate with the Estimation, Procurement, Production, and Project teams regarding design requirements.</p></li><li><p>Assist in preparing material specifications and finish schedules.</p></li><li><p>Revise drawings based on client comments, consultant feedback, and site conditions.</p></li><li><p>Conduct site visits and take measurements when required.</p></li><li><p>Ensure all drawings comply with project specifications, company standards, and local regulations.</p></li><li><p>Maintain organized records of drawings, revisions, and project documentation.</p></li><li><p>Support the senior design team in project coordination and design development.</p></li><li><p>Stay updated on industry trends, materials, and design software.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Technical Skills:</p><ul><li><p>Proficiency in AutoCAD (mandatory).</p></li><li><p>Working knowledge of SketchUp, 3ds Max, or similar 3D modeling software.</p></li><li><p>Familiarity with Adobe Photoshop, Illustrator, or other presentation software.</p></li><li><p>Basic understanding of joinery manufacturing processes and fit-out construction.</p></li><li><p>Ability to interpret architectural and engineering drawings.</p></li><li><p>Knowledge of materials, finishes, hardware, and furniture detailing.</p></li><li><p>Proficiency in Microsoft Office applications.</p><br></li></ul><p>Qualifications:</p><ul><li><p>Bachelor's Degree or Diploma in Interior Design, Architecture, Industrial Design, or a related field.</p><br></li></ul><p>Experience:</p><ul><li><p>1–3 years of experience in joinery, interior fit-out, furniture manufacturing, or architectural design.</p></li><li><p>GCC/Qatar experience is an advantage but not mandatory.</p></li></ul>

Job description:<br><br><p><strong>Job Purpose</strong></p><ul> <li>Provide post award contracts support and analysis to the Onshore &amp; Operations Support Group aligned with QatarEnergy LNG policies and procedures.</li> </ul><p><strong>Key Job Accountabilities</strong></p><ul> <li>Assist in providing effective post award management of Onshore &amp; Operations Support contracts in accordance with QatarEnergy LNG systems and procedures and aligned with the highest ethical standards.</li> <li>Maintain updated contracts list and track the validity and cap value utilization of the contracts on a continuous basis.</li> <li>Assist and ensure Contractor Performance Evaluations are carried out periodically as per requirements.</li> <li>Assist and ensure contractor development is carried out on a continuous basis and that it is evaluated and monitored with emphasis on local content.</li> <li>Review ITPs for compliance to contracted rates before issuing to the contractors and create purchase orders in SAP based on the approved ITPs.&nbsp;</li> <li>Develop and execute Contract Work Orders (CWO) including managing the final payments and close-out.</li> <li>Support the development and finalization of the yearly Contracts Demand Plan.</li> <li>Provide the month-end and year-end accruals numbers in a timely and accurate manner.</li> <li>Ensure that all invoices are cleared on time and as per the terms and conditions in the contract.</li> </ul><p><strong>Qualifications</strong></p><ul> <li>Bachelor’s degree in Engineering, Science or Business Administration.</li> </ul><p><strong>Knowledge and/or Experience</strong></p><ul> <li>6 years’ experience in a cost and contracts management environment within the oil and gas industry.</li> </ul><p><strong>Technical and Business Skills</strong></p><ul> <li>Proficient in written and spoken English.</li> <li>Proficient in the use of MS Office Suite.</li> <li>Working knowledge of SAP or similar resource planning system software.&nbsp;</li> <li>Good knowledge of contract law and industry practice.</li> <li>Proficiency in Power BI/Advanced Power BI</li> </ul><p>&nbsp;</p>