وظائف فني نحاس في قطر

<p>JOB PURPOSE / OBJECTIVE Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.?? KEY ACCOUNTABILITIES Routine Duties Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares. Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs). Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment. Ensure that the spares parts used are maintained and available.? Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical. Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site. Takes initiative to identify and implement areas for improvement in HVAC & Lighting. Support emergency planned SD’s and TA related maintenance activities. Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.? Review preventive / Corrective maintenance (PM/CM) checklists as required. Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner. Identify spare parts requirements / material required for equipment overhauling / repairs. Use SAP functionality to plan and execute the scheduled jobs. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc. Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required. Conduct daily toolbox meetings as required.? ? 4.2 KEY ACCOUNTABILITIES Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars. Adhere to and follow all company safety policies, procedures, and Tenets of Operation. Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents. Understand the Q-Safe process and actively participates in accordance with expectations. Actively Participate toolbox meetings and MSCM meetings as required. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Follow up metrics for employee safety performance and to achieve departmental KPI. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required: 2 years Diploma of relevant field. Preferred: Bachelor’s degree in Engineering or relevant Technical degree. Experience Required: 3-5 years of experience in HVAC. Preferred: Experience in Petrochemicals Industry Languages Required: English- proficient. Preferred?:Arabic- working knowledge WORKING RELATIONSHIPS Internal Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group External Vendors, Contractors, and Subcontractors</p>

<p>POSITION SUMMARY YOUR LEGACY STARTS WITH US At The Ritz-Carlton, Doha, we invite you to experience refined luxury where timeless elegance meets true Qatari hospitality. Situated along the pristine shores of the Arabian Gulf for almost 24 years, our 5-star resort features 374 elegantly designed rooms &amp; suites, award-winning restaurants, world-class Spa facilities with a state-of-the-art Fitness Center, and impeccable service that defines our legendary brand. From serene indoor and outdoor pools to a private beach and a Club Lounge for elevated and personalized experiences, every detail perfectly reflects our commitment to excellence. The property is also ideal for events with a wide selection of meetings rooms, stunning wedding venues and a dedicated team that thoughtfully plans and tailors to each unique vision. Whether you re savoring an afternoon tea in our lobby lounge, watching the city skyline sparkle by night in one of our restaurants, or celebrating an important event, The Ritz-Carlton, Doha, presents a truly remarkable setting for life s most meaningful moments. FIND PURPOSE IN YOUR PASSION At The Ritz-Carlton, we firmly believe that our Ladies &amp; Gentlemen are the heart of everything we do and the most important resource in our service commitment to our guests. With passion, genuine care, dedication and pride, we can achieve common goals and grow together while crafting moments that will be remembered forever. Which is why at The Ritz-Carlton, Doha, we are currently seeking passionate individuals to join our esteemed team and bring their own unique expertise to our world-famous service philosophy. As an Elite hotel in the region with a deep generational legacy, we offer you in return: A rewarding career within one of the most recognized and prestigious luxury brands in the world. Personal and professional development plans with curated training materials and guidance from highly skilled and experienced colleagues in the industry. Various opportunities for internal growth both locally and internationally within the portfolio of Marriott International properties. Consistent &amp; reliable support to ensure you always have the tools and knowledge to harness your full potential and reach your goals. A competitive package, inclusive of accommodation, flight tickets, transportation, meals, and more: Exclusive training and leadership development programs Recognition and rewards for exceptional service Preferential Members Rates at Marriott Hotels Globally Dining &amp; Wellness discounts for your family and you Medical Insurance Coverage An HR team dedicated to your success and wellbeing OUR EXPECTATIONS FROM THE ROLE: Monitor property grounds to ensure a pleasant appearance. Maintain the appearance of fountains, planters, or other grounds features by cleaning, replacing or making repairs. Install new flowers, bulbs, grass, trees, and shrubs. Maintain flower beds, baskets, and boxes by watering, removing weeds, trimming, and performing other maintenance. Replace and transplant trees, flowers, and shrubs. Maintain trees and shrubs by trimming and pruning. Trim and edge grass in areas that mowers cannot reach. Maintain lawns by mowing, edging, raking leaves, and performing other lawn maintenance. Install, maintain, and operate irrigation systems. Remove and bag trash from all exterior trash cans. Operate dump trucks, tractors, trucks, or utility vehicles to transport equipment, supplies, materials, and debris. Wash, clean, and re-fuel all equipment after use. Follow all company and safety and security policies and procedures; report defective equipment, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; protect company assets. Support team to reach common goals. Ensure adherence to quality expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Removal of snow and maintenance of ice management (if applicable). Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: high school diploma or G.E.D. equivalent.</p><p>Related Work Experience: At least 1 year of related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>REQUIRED QUALIFICATIONS License or Certification: Valid Driver s License</p>

<p>Provide technical guidance to support the Transportation Network and Airfield Pavement Activity Management Plan (TNAP) AMP as required by the contract. This position will be in support of the Air Force Contract Augmentation Program (AFCAP), and it is located at Al Udeid Air Base (AUAB), Doha, Qatar. Essential <b>Responsibilities</b>:</p><p>• Provides management service of airfield pavements and transportation infrastructure networks to enable the safe and efficient movement of people, equipment, aircraft, and material across the installation and airfield.</p><p>• Advise and assist in a portfolio-wide view of facilities and linear infrastructure at the highest level.</p><p>• Provide technical guidance to support the Heavy Pavements Sub-AMP, Pavements/Airfield Pavements Sub-AMP duties and responsibilities.</p><p>• Responsible for an asset lifecycle management portfolio containing all Air Force-owned roads, bridges, parking lots, curbs and gutters, traffic signals, signage, marking, sidewalks, walkways, rail systems, docks, final denial barriers (FDB), FDB control systems, FDB supporting safety systems and traffic management and planning.</p><p>• This AMP Manager s subject matter expertise shall lend itself to providing the Government with recommendations on how best to invest in the assets under their purview and align its efforts under four main lines of effort: Asset Visibility, Requirements, Planning, and Performance.</p><p>• Advise and assist the Government to ensure the asset inventory reflects sufficient level of detail to enable investment decisions.</p><p>• Advise and assist with the development of the Future Years Defense Program +3 (FYDP+3) for infrastructure pavements.</p><p>• Conduct regular quality assurance (QA) reviews of data and use gap analysis to identify where Sub-AMP and subject matter experts shall collect additional data.</p><p>• Implement data standards for assets within respective portfolios and provide guidance to Sub-AMPs and the Built Infrastructure Assessment Team (BIAT) on which inventory to prioritize and advise on how often and when to conduct condition assessments.</p><p>• Support condition assessments and provide guidance to ensure relevant data has visibility and analysis.</p><p>• Work with Operations Flight shops, subject matter experts, and the Engineering Flight to advise and assist the Government on the condition assessment methodology and approach to ensure the data is adequate and the data resulting from the condition assessments are properly documented.</p><p>• Advise and assist the Government in defining and prioritizing requirements within respective activities.</p><p>• Integrate requirements from Sub-AMPs within their activity and identify target years for project development, design, and execution.</p><p>• Advise and assist on creating requirements to support future opportunities deriving from asset analysis.</p><p>• Utilize appropriate systems to identify investment requirements at facility or equivalent master-asset level to repair/sustain systems throughout their life cycle.</p><p>• Advise and assist on developing requirements which may be executed through organic Operations Flight labor or through projects managed in the Engineering Flight.</p><p>• Perform work planning, including grouping of requirements into opportunities and developing a rough cost and work estimate for them.</p><p>• Lead semi-annual AMP working groups. AMP working groups should discuss the status of asset visibility, the current risk in asset portfolios, project candidates, performance assessments of key performance indicators (KPI), a review of any completed AMP objectives, and a summary of AMP objectives to accomplish in the coming year.</p><p>• When construction impacting the TNAP AMP is completed the TNAP AMP Manager will update the Pavements Condition Index in PAVER with no more than one (1) error per update.</p><p>• Advise and assist the Government in the development of metrics and KPIs to ensure activities deliver optimal service.</p><p>Work Environment, Physical Demands, and Mental Demands:</p><p>• Able to lift, carry, and push supplies and boxes up to 50 pounds.</p><p>• Personnel should be aware of moving on short notice and under adverse conditions.</p><p><b>Other Responsibilities:</b></p><p>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Position Knowledge, Skills and Abilities Required:</b></p><ul><li>Civil Engineer Bachelor s Degree from an ABET Accredited University with at least five (5) years experience in pavement, construction, and maintenance and transportation infrastructure management.</li><li>Experience with pavement management systems is preferred.</li><li>Must have an equivalent of an Air Force minimum 5 level or equal and 5 years experience in pavement maintenance and repair, asphalt paving, concrete paving, and pavement marking.</li><li>Prior R&amp;R experience preferred.</li><li>Must be familiar with PAVER, serve as the engineering expert and liaison for the Traffic Safety Council, and work with the sub-AMP managers assigned to areas of TNAP responsibilities.</li><li>Required to complete AFIT WENG 200, WENG 400, WENG 555, WMGT 241, WMGT 331, WMGT 341, WMGT 417 required and WENG 550 desired. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date.</li><li>Must be familiar with NexGen IT and BUILDER SMS.</li><li>Ability to exercise discretion and make effective decisions. Solid communications and strong interpersonal skills a must.</li><li>Strong ability to work and lead as a member of a diverse, dynamic team.</li><li>Outstanding problem-solving skills and sound judgment.</li><li>Computer literate; can use Microsoft Office and Project, etc.</li><li>Must be a USN to fill this position.</li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance.</li><li>Possess a valid state issued driver s license or international driver s license and passport.</li><li>Prior overseas government contracting experience preferred.</li></ul>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As an General Mechanic, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>To respond as quickly as possible to maintenance requests from both clients and colleagues. To maintain a shift log book as a record for all occurrence during the assigned shift. To carry out preventive maintenance tasks whenever they are assigned making sure to fully complete the required documentation. To respond immediately to all emergency calls for leakage, fire, power, etc. To ensure the implementation of all instructions given by the Assistant Director of Engineering / or Duty Foreman. To help with the installation of new equipment when required. To be responsible for cleanliness and protection of surroundings whilst performing work. To carry out any other reasonable duties and responsibilities as assigned and should be multi-tasking. To respond to changes in the (enter function) function as dictated by the industry, company or the Hotel.<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

Job Description <div> <p>Executes all electric and associated work to the highest professional standard for the whole property</p> <p>Performs the tasks assigned to him and ensures their implementation while working independently.</p> <p>Acts on issues and concerns in his activity field immediately.</p> <p>Must be able to control the stocks and other items in his workshop and order more as required</p> <p>Abides to the daily task and ensures timely implementation</p> <p>Ensures oneself is thoroughly familiar with the hotel s emergency procedures and in a state of preparedness for any emergency which may occur.</p> <p>Is familiar with all related company documentation and especially with the relevant Operational Standards Manual for his/her field of responsibility.</p> <p>Assist in Task Force Teams for new openings</p> <p> </p></div><p><strong>Desired Candidate Profile</strong></p>Qualifications <div> <p> <strong>Education:</strong> Diploma or Certificate in Electrical Engineering/Installation</p> <p> <strong>Experience:</strong> Minimum 3 years in a similar electrical maintenance or installation role within a hospitality or facilities management environment</p> <p> <strong>Required Skills &amp; Competencies:</strong> </p> <p> </p> <ul> <li>Proven expertise in electrical systems maintenance, troubleshooting, and repair</li> <li>Proficiency in reading electrical schematics and technical documentation</li> <li>Strong inventory and stock management capabilities</li> <li>Ability to work independently and manage multiple tasks efficiently</li> <li>Knowledge of health and safety regulations and emergency procedures</li> <li>Excellent problem-solving and communication skills</li> </ul> <p> </p></div>

<p>Position Summary: Maintain launch/recover UC-35 Cessna Citation aircraft. Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Principal Accountabilities: Operationally checks repaired or modified systems for proper operation. Performs quality maintenance on assigned aircraft in accordance with federal aviation regulations, original equipment manufacturers, or military technical orders as specified in the statement of work instructions. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers' and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks, and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. May specialize in engine repair. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</li><li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li><li>Ability to read, write, and interpret technical duties is required.</li><li>Ability to communicate effectively with all levels of employees throughout the organization.</li><li>Proven track record demonstrating adaptability to change and the ability to respond to challenges in a changing environment.</li><li>Valid FAA A&amp;P Certificate Required.</li><li>All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements.</li><li>Recent full-time experience in aviation maintenance with the assigned aircraft during the past 12 months.</li><li>Three (3) or more years aircraft mechanic experience as an aircraft mechanic on assigned aircraft required, five (5) years preferred.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience</li><li>Completion of formal maintenance training on assigned aircraft is desired.</li><li>Qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training.</li><li>High school diploma or equivalent.</li><li>Tools are provided by Amentum.</li><li>Must be able to obtain and maintain a US Govt DoW Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to see imperfections, micrometer readings and other small scales.</li><li>Must be able to read and interpret newspaper and typewritten print.</li><li>Must be able to communicate by voice and detect sounds by ear over telephone.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li><li>May be exposed to extreme noise from turbine and jet engine aircraft.</li><li>May be exposed to fumes or airborne particles.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li><li>Must be able to travel internationally to and between remote locations in austere and/or hostile environments.</li></ul>

<p>JOB PURPOSE / OBJECTIVE Provide quality technical support in welding and fabrication / Shop Management. Ensure consistent quality of work by implementing quality control standards. Manage of materials, spare parts. Ensuring proper maintenance and calibration of workshop equipment for optimal performance and safety. KEY ACCOUNTABILITIES People Management Monitor the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures. Ensure Direct Hires /Baseload / Call-off Contractors comply with all company policies, procedures, Standard Maintenance Procedures, and Daily Instructions. Maintain good communications between Supervisor and Production/Technical personnel. Provide professional Leadership/direction to Technicians to complete the tasks with safety and quality. Assist in certification process of workers assigned through training department. Routine Duties Perform PM of all equipment’s & tools and bring any abnormalities to the attention of Supervisor immediately and take necessary corrective actions. Carries out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations to repair parts that arrive in Valve shop. Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to Valve shop.? Personally perform the cutting/welding tasks and demonstrate practical knowledge and expertise. Ability to carry out soldering and brazing jobs. Must have knowledge of codes and standards related to piping materials & fittings. Carry out all assessment of job plan including JSA, review and knowledge of isometric drawings, P&IDs, understands recommendations to perform the job in workshop/ Field. Ensure that all Welding / Fabrication activities are performed in compliance with the ERG recommendations/policies. Ensure proper welding electrodes are used by all welders and ensure the electrodes are preserved properly. Ensure the weld joints are properly prepared and proper procedure is followed by all fabricators/welders! Ensure proper materials are used by all fabricators and welders. Ensure all welders are qualified and the quality inspection requirements of all jobs are fulfilled. Ensure the fabrication and welding jobs are performed with good workmanship. Ensure availability of welding consumables and PPEs and coordinate with Supervisor/planner to avoid shortage. Coordinate with workshop supervisor in providing specifications, SOW etc. & assist in technical evaluations related to workshop activities. Must use SAP functionality to acknowledge and execute scheduled jobs. KEY ACCOUNTABILITIES Support emergency planned SD’s and TA related to valve shop in workshop activities. Should be able to develop, review / revise procedures related to Valve Shop activities. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Support in achieving the department metrics. Perform equipment PM/Inspection in a timely manner. Ability to make necessary adjustments with minimum of Supervision, trouble shoot equipment problems, recommend solutions, resolve root cause, record/report findings. Shop Management - Provide necessary support to Workshop Supervisor for smooth functioning Fabrication Shop. Issue Permit in and around Workshop area under workshop ownership. Maintain good housekeeping and order in the workshop. Policies, Systems, Processes & Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes, and practices in order to increase productivity and operational efficiency. Implement all relevant Section’s policies, processes, procedures, and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required?(Qualification1 / Discipline: Diploma in Engineering. Preferred?(Qualification1 / Discipline): - Experience Required?(Years2 / Job Level3 / Industry): 5-7 years of experience in the Petrochemical Industry Preferred?(Years2 / Job Level3 / Industry): Experience in the Petrochemical Industry Other Job Specific Requirements and/or Vocational Accreditations Working knowledge of P&ID and Isometric Drawing Interpretation Working knowledge of Gas Cutting / Cylinder handling / Cutting Set Preparation Working knowledge of Grinding / drilling / hammering Working knowledge of Piping & piping supports- fabrication. Working knowledge of Plate bending / rolling / shearing Working knowledge of SMAW, TIG, MIG, SPOT welding Working knowledge of Welding electrode identification / baking / storage Working knowledge of Pneumatic tools and hand tools / Overhead cranes / Lifting Tools and Tackles Hold welder certificate on welding procedures in GAS, ARC, MIG and TIG welding as per relevant ASME. Languages Required?(Language / Level4): English - working knowledge. Preferred?(Language / Level4): - WORKING RELATIONSHIPS Internal Maintenance Department, Technical Department, HSE Departments, ERG External Subcontractors</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: EPA Universal Certification<br>Driver's License<br>HVAC Certification<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Key Responsibilities:Technical Documentation: Write, check, and validate digital documentation and Standard Operating Procedures in accordance with project and company policies using professional editing tools. Administer the Content Management System to ensure a single source of accurate information is available digitally to all maintenance staff. System Integration: Utilize systems such as SAP, Cormap, Share Point, and others to source information and configure the documentation system for optimum creation, approval, distribution, and publication. Health, Safety & Environment (HSE): Assist the Program Manager in implementing safe systems and controls within your area of responsibility. Understand, implement, and comply with company HSQE policies, and fully participate in the behavioral safety agenda. Compliance: Ensure all data and information within the local documentation system is updated and approved in compliance with local procedures and the company's compliance policies and reporting ethos. Engineering Liaison: Work closely with Maintenance Engineers, Technical Managers, and Engineering Services to facilitate successful and timely approvals. Continuous Improvement & Quality: Continuously develop departmental processes and manage relationships with internal and external suppliers to position the company as an industry leader in train maintenance integrity. Requirements Experience with Digital Maintenance Management Systems. Proven experience delivering technical documentation in a heavy industry environment (Rolling Stock maintenance highly preferred). Proficiency in Microsoft software (Word, Excel, and Power Point). Effective organizational and time management skills. Excellent communication and interpersonal skills

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an Electrician you are responsible to install, maintain and repair electrical wiring, equipment and fixtures to ensure that work is in accordance with relevant codes and your role will include key responsibilities such as:<br><br>• Maintenance of all M&amp;E and HVAC equipment within the hotel complex with special emphasis on health safety<br><br>• Maintenance and repair works of all mechanical and electrical heating and ventilation equipment, ensuring the on-going safe and efficient running of the hotel<br><br>• Fix mains / domestic single and 3 phase supplied distribution systems and all lighting and in-house power installations / appliances<br><br>• Assist with all emergency services, e.g. fire alarms, lighting, batteries and standby power requirements, inclusive of generators<br><br>• Control systems to M&amp;E related processes e.g. general equipment, televisions, hair dryers, shavers sockets, etc. and all guest and service lifts<br><br>• Prepare sketches or follow blueprints to determine the location of wiring and equipment and ensure conformance to building and safety codes<br><br>• Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools and testing equipment including oscilloscopes, ammeters and test lamps.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>The <b>Helpdesk Agent (Call Center Agent)</b> will serve as the first point of contact for users requiring IT support through phone, email, live chat, and ticketing channels. The role involves diagnosing and resolving technical issues, logging incidents and service requests accurately, providing remote troubleshooting support, and escalating unresolved problems to the appropriate technical teams.<br></p><br><p>The Helpdesk Agent will also maintain complete ticket documentation, follow ITIL-aligned processes, deliver professional customer service, and support users with common applications, systems, and workplace technology.<br></p><br><br><span>RequirementsBachelor’s Degree in Information Technology, Computer Science, or a related field.<br>Minimum <b>5 years</b> of experience in IT Helpdesk, Service Desk, Call Center IT Support, or User Support.<br>Strong knowledge of Windows operating systems, Microsoft Office 365, Microsoft Teams, Microsoft Edge, and desktop troubleshooting.<br>Experience using ITSM or ticketing systems; <b>SMAX experience is preferred</b>.<br>Ability to diagnose and resolve common hardware, software, access, connectivity, and application-related issues remotely.<br>Strong incident logging, ticket prioritization, escalation, and follow-up skills.<br>Excellent telephone etiquette, customer-service orientation, and communication skills.<br>Ability to remain professional and composed while handling urgent issues or difficult users.<br><b>ITIL certification is mandatory</b>.<br>Fluent in <b>Arabic and English</b>, both written and spoken.<br>Willingness to work rotational shifts, including nights, weekends, and public holidays.<br></span><br> </div>

<p>Provide technical guidance to support the Transportation Network and Airfield Pavement Activity Management Plan (TNAP) AMP as required by the contract. This position will be in support of the Air Force Contract Augmentation Program (AFCAP), and it is located at Al Udeid Air Base (AUAB), Doha, Qatar. Essential Responsibilities: Provides management service of airfield pavements and transportation infrastructure networks to enable the safe and efficient movement of people, equipment, aircraft, and material across the installation and airfield. Advise and assist in a portfolio-wide view of facilities and linear infrastructure at the highest level. Provide technical guidance to support the Heavy Pavements Sub-AMP, Pavements/Airfield Pavements Sub-AMP duties and responsibilities. Responsible for an asset lifecycle management portfolio containing all Air Force-owned roads, bridges, parking lots, curbs and gutters, traffic signals, signage, marking, sidewalks, walkways, rail systems, docks, final denial barriers (FDB), FDB control systems, FDB supporting safety systems and traffic management and planning. This AMP Manager s subject matter expertise shall lend itself to providing the Government with recommendations on how best to invest in the assets under their purview and align its efforts under four main lines of effort: Asset Visibility, Requirements, Planning, and Performance. Advise and assist the Government to ensure the asset inventory reflects sufficient level of detail to enable investment decisions. Advise and assist with the development of the Future Years Defense Program +3 (FYDP+3) for infrastructure pavements. Conduct regular quality assurance (QA) reviews of data and use gap analysis to identify where Sub-AMP and subject matter experts shall collect additional data. Implement data standards for assets within respective portfolios and provide guidance to Sub-AMPs and the Built Infrastructure Assessment Team (BIAT) on which inventory to prioritize and advise on how often and when to conduct condition assessments. Support condition assessments and provide guidance to ensure relevant data has visibility and analysis. Work with Operations Flight shops, subject matter experts, and the Engineering Flight to advise and assist the Government on the condition assessment methodology and approach to ensure the data is adequate and the data resulting from the condition assessments are properly documented. Advise and assist the Government in defining and prioritizing requirements within respective activities. Integrate requirements from Sub-AMPs within their activity and identify target years for project development, design, and execution. Advise and assist on creating requirements to support future opportunities deriving from asset analysis. Utilize appropriate systems to identify investment requirements at facility or equivalent master-asset level to repair/sustain systems throughout their life cycle. Advise and assist on developing requirements which may be executed through organic Operations Flight labor or through projects managed in the Engineering Flight. Perform work planning, including grouping of requirements into opportunities and developing a rough cost and work estimate for them. Lead semi-annual AMP working groups. AMP working groups should discuss the status of asset visibility, the current risk in asset portfolios, project candidates, performance assessments of key performance indicators (KPI), a review of any completed AMP objectives, and a summary of AMP objectives to accomplish in the coming year. When construction impacting the TNAP AMP is completed the TNAP AMP Manager will update the Pavements Condition Index in PAVER with no more than one (1) error per update. Advise and assist the Government in the development of metrics and KPIs to ensure activities deliver optimal service.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Position Knowledge, Skills and Abilities Required:</b> Civil Engineer Bachelor s Degree from an ABET Accredited University with at least five (5) years experience in pavement, construction, and maintenance and transportation infrastructure management. Experience with pavement management systems is preferred. Must have an equivalent of an Air Force minimum 5 level or equal and 5 years experience in pavement maintenance and repair, asphalt paving, concrete paving, and pavement marking. Prior R&amp;R experience preferred. Must be familiar with PAVER, serve as the engineering expert and liaison for the Traffic Safety Council, and work with the sub-AMP managers assigned to areas of TNAP responsibilities. Required to complete AFIT WENG 200, WENG 400, WENG 555, WMGT 241, WMGT 331, WMGT 341, WMGT 417 required and WENG 550 desired. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date. Must be familiar with NexGen IT and BUILDER SMS. Ability to exercise discretion and make effective decisions. Solid communications and strong interpersonal skills a must. Strong ability to work and lead as a member of a diverse, dynamic team. Outstanding problem-solving skills and sound judgment. Computer literate; can use Microsoft Office and Project, etc. Must be a USN to fill this position. Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance. Possess a valid state issued driver s license or international driver s license and passport. Prior overseas government contracting experience preferred.</p><p>Work Environment, Physical Demands, and Mental Demands: Able to lift, carry, and push supplies and boxes up to 50 pounds. Personnel should be aware of moving on short notice and under adverse conditions.</p><p>Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p>