وظائف فني نحاس في قطر

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>

Company Description<br><br>Being a Pullman Heartist means embodying and conveying the brand mindset through the values of commitment, adaptability and creativity.<br><br>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.<br><br>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.<br><br>Job Description<br><br>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.<br><br>Qualifications<br><br>Min. 2 years experience in a similar role in a five-star Hotel brand Strong troubleshooting skills and knowledge of safety procedures. Able to communicate in English Ability to work well under pressure in a fast-paced environment<br><br>Additional Information<br><br>Our Commitment To Diversity & Inclusion<br><br>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<br><br>Why work for Accor?<br><br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br><br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Being a Pullman Heartist means embodying and conveying the brand mindset through the values of commitment, adaptability and creativity.</p><br><p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p><br><p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p><br><br>Job Description<br><br><ul><li>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses).</li><li>Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime.</li><li>Ensure compliance with safety standards and manufacturer guidelines during repairs.</li><li>Maintain accurate records of maintenance activities and spare parts inventory.</li><li>Coordinate with the Engineering team for scheduled servicing and emergency repairs.</li><li>Respond quickly to guest and operational requests related to kitchen and laundry equipment.</li><li>Assist in energy-saving initiatives and equipment optimization.</li></ul><br>Qualifications<br><br><ul><li>Min. 2 years&nbsp;experience in a similar role&nbsp;in a five-star Hotel brand&nbsp;&nbsp;</li><li>Strong troubleshooting skills and knowledge of safety procedures.</li><li>Able to communicate in English</li><li>Ability to work well under pressure in a fast-paced environment</li></ul><br>Additional Information<br><br><p><strong>Our commitment to Diversity &amp; Inclusion:</strong></p><br><p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p><br><p><strong>Why work for Accor?</strong></p><br><p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p><br><p>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit&nbsp;&nbsp;https://careers.accor.com/</p><br><p><strong>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</strong>&nbsp;&nbsp;&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Industrial Hygiene and Safety Support</li> <li>Inspect, test, and evaluate workplace environments, equipment, and practices to ensure safety standards and government regulations are followed.</li> <li>Perform and generate report for industrial hygiene surveys in the workplace, e.g. Heat Stress monitoring, Noise, Chemical Exposure, Local Exhaust Ventilation and Fume hoods, Lighting, Radiation and Ergonomic studies to evaluate health risks in the workplace and IH Exposure Assessment.</li> <li>Manage all IH equipment, including routine maintenance, calibration requirements, and respirator fit testing requirements, including fit testing and record keeping and manage the emergency plant wide escape packs. Participate in compliance audits, conduct formal audits on IH programs, e.g. Industrial radiography &amp; MSDS system, Safety Signs and Label Audits.</li> <li>Approve and verify the use of all new chemicals entering the facility and act as Assistant Radiation Protection Officer, including issuing radiation clearance certificates when necessary.</li> <li>Participate and Lead implementation and auditing Safety programs e.g. PPE Assessment, Contractor Safety Meeting, PTW, LT&amp;T, JSA, Risk Assessment and Confined Space Permit Audit.</li> <li>Manage the issuance and registration of Toxic lips and ensure all records are maintained as required. Manage and ensure the implementation of IH yearly sampling plan.</li> <li>Participate in Plant MOC by doing Hazard Analysis, Change Evaluation and PSSR.</li> <li>Assist IH Specialist to develop and implement Industrial Hygiene management Program/Plan to ensure implementation of the necessary IH controls to address at-risk health/hygiene condition within the workplace.</li> <li>Support necessary section support in the absence of the Specialist to provide IH coverage as required.</li> </ul><br><ul> <li>Required (Qualification / Discipline): Diploma in Science e.g. Biology, Physics, Nursing, Public Health. Preferred (Qualification / Discipline): Bachelor's Degree in Science or any discipline.</li> <li>Required (Years2 / Job Level3 / Industry): Up to 3 years of experience in the O&amp;G Industry. Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals Industry.</li> <li>OSHA (IH) Standards/Regulations</li> <li>Safety &amp; Health Instrumentation/Equipment</li> <li>MS Office Applications</li> <li>Good abilities for trouble shooting</li> <li>Good communication Skills</li> <li>Required (Language / Level): English - proficient</li> <li>Preferred (Language / Level): Arabic - working knowledge</li> </ul><br><p>Job Offer</p><br> <ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance </li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> <li><strong>Duration:</strong><ul> <li>long-term permanent</li> </ul></li> <li><strong>Location:</strong><ul> <li>Ras Laffan, Qatar</li> </ul></li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Key Responsibilities</span><br></span><ul><li><span>Diagnose and repair electrical faults in cars, trucks, and commercial vehicles.</span><br></li><li><span>Inspect, repair, and replace batteries, alternators, starters, wiring, relays, fuses, sensors, and lighting systems.</span><br></li><li><span>Troubleshoot vehicle electrical and electronic systems using diagnostic scanners, multimeters, and testing equipment.</span><br></li><li><span>Install and repair vehicle accessories, including lights, horns, alarms, cameras, and electrical control units.</span><br></li><li><span>Diagnose and repair automotive air-conditioning systems.</span><br></li><li><span>Perform AC gas charging, refrigerant recovery, vacuum testing, and leak detection.</span><br></li><li><span>Repair or replace AC compressors, condensers, evaporators, expansion valves, blowers, hoses, and related components.</span><br></li><li><span>Carry out preventive maintenance and routine inspections of electrical and AC systems.</span><br></li><li><span>Read and understand vehicle electrical wiring diagrams and technical manuals.</span><br></li><li><span>Ensure all repairs are completed according to manufacturer specifications and safety standards.</span><br></li><li><span>Maintain accurate records of inspections, repairs, spare parts, and services performed.</span><br></li><li><span>Report major faults, required spare parts, and additional repair requirements to the supervisor.</span><br></li><li><span>Maintain tools, equipment, and the workshop area in a safe and organized condition.</span><br></li></ul><br><span>Requirements<span>ITI, Diploma, or technical certification in Automotive Electrical, Automobile Engineering, Refrigeration and Air Conditioning, or a related field.</span><br><span>Minimum 3–5 years of relevant experience as an Automotive Electrician and AC Mechanic.</span><br><span>Practical experience working with cars, light vehicles, buses, and heavy trucks.</span><br><span>Strong knowledge of 12V and 24V automotive electrical systems.</span><br><span>Experience in vehicle AC troubleshooting, gas charging, leak testing, and component replacement.</span><br><span>Ability to operate diagnostic scanners, multimeters, AC recovery machines, and other workshop equipment.</span><br><span>Good understanding of electrical wiring diagrams and vehicle technical manuals.</span><br><span>Ability to independently identify faults and complete repairs efficiently.</span><br><span>Basic communication skills in English.<br></span><br>Duration: 2 Months and Extendable</span><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Work as Pipe Fitter (GRE) at a project site.</p><p>Have good skills for joints fit-up, measure the size of erection work, Shifting pipe materials (including carbon steel, stainless steel and GRE etc.), preassembly pipe spool pieces and installation pipe system on site, Shifting pipe supports and hangers materials, preassembly and installation supports on site. Hold certificates and knows how to fit-up joints, know how to read drawings. Be capable of cutting, prefabrication and installation of HP/IP/LP pipes according to the design drawings. Be capable of prefabrication and installation the supports and hangers according to the design drawings. Good command of English. Gulf countries working experience is preferred.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Experience 5 years minimum, preferable RTR.</li><li>Good command of English.</li><li>Present location KSA, IQAMA transferable (Preferable)</li><li>Hold certificates and knows how to fit-up joints, know how to read drawings.</li><li>Good command of English.</li><li>Gulf countries working experience is preferred.</li></ul><p></p></section>

Overview<br><br>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. <br><br>The Supply Technicians provide centralized retail supply and maintenance support; performs aspects of supply management work (e.g., inventory management, storage management, bar coding, property utilization) related to depot, local, or other supply activities. The technicians have a knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA.<br><br>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program!<br><br> You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. <br><br>Responsibilities<br><br> Performs inventory management procedures, including ordering, receiving and storing supplies. Selects the correct stock for issue, creates and process material release orders, and keeps records on incoming and outgoing stock. Reconciles customer documentation with the PSRA and SSA on issues, receipts, storage of supplies and equipment, and financial discrepancies. Screens dues-out reconciliation listings & prepares cancellation/follow up documents. Establishes and maintains automated and manual accounting records and corrects errors and exception documents. Provides status on supply requests, shipments and job-ordered items. Operates a Cannibalization Point in accordance with AR 710-2. Reconciles open requests, repairable exchange items and cannibalization items. Establishes and maintains stock records and other documents such as inventory, material control, accounting and supply reports. Assists in validating property book inventories for equipment at the sites. Performs prescribed load list and shop stock list duties to assist the DSSTs. Compare packing lists, receipt documents, bills of lading, inspection reports, other documents, with purchase orders/requisitions to verify accuracy of stock data and quantities received against bills of lading, and shipping documents. Assures stock numbers/prices/sources of data are correct through use of Army Master Data File (AMDF), Supply Bulletins (SBs), supply letters, regulations, etc. Revises quantities ordered based on number of items on hand & reviews records for possible substitution of items. Unloads, unpacks, inspects, counts, segregates and stores incoming supplies. Prepare Forms 2404, 2407) to submit a work order to the maintenance department. Repair and constructs fiberboard or wooden containers. Constructs bins, shelving and other storage aids. Packs, crates, stencils, weigh and bands equipment and supplies. Loads, unloads and moves stock using equipment such as forklifts and hand trucks. Required to climb a ladder and stand for long periods of time. Performs other duties and assignments assigned. <br><br>Qualifications<br><br> Qualifications Security Clearance: The position requires an active and current Secret level security clearance. Education/Certifications: High School Diploma required. Some college preferred. OSHA 10-Hour General Industry certification. Experience: Minimum three years’ experience in Unit Level Supply Management and Property Control. Must have a working knowledge of Microsoft Office, SAMS, and ULLS-G. Knowledge of principles and methods for accountability of supplies and equipment at retail/wholesale level, warehousing and moving goods by air, rail, sea, or road. Experience with a customer service-oriented company. Skills & Technology Used: Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed. Other software / work management tools as directed. Forklift operation. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. <br><br>#clearance

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-28&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems.&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>None/Not Required&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Not Required<br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggress ion. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p>The Qatar Patriot Sustainment Program provides support to a Foreign Military Sales Program in support of QEADF.<br>We provide Patriot Air Defense Maintenance, logistical and training support.<br>Our program upholds a strong relationship with the customer driven by strong values in support of the mission.<br>&nbsp;</p><br><br><p><b>What You Will Do:</b></p><br><br><br><ul><li>The Power Generation Tech will use his in depth knowledge and field experience related to diesel powered generators to perform the refurbishment and sustainment of the Lechmotoren 150kW, 30kW and 15kW power generation equipment used with the Patriot System. This will include disassembly, cleaning, modification (as required), refurbishment and reassembly of power generator assemblies in accordance with applicable technical manuals (TMs) and refurbishment and upgrade procedures. Generator Tech must perform depot level diagnostic, fault isolation and repair capability for Lechmotoren generators. The Generator Tech will provide oversight on Organizational and Direct Support repairs in accordance with (IAW), US ARMY 10/20/30 PMCS Maintenance Standards. Generator Tech must perform maintenance inspections and repairs, to include parts ordering in accordance with applicable technical manuals and procedures. Must also complete records, maintain tools and equipment, and performs various clean-up and refurbishment activities. Additional responsibilities will include the initial setup and facilitization of the in-country work location required for the refurbishment effort. May work with, train, and advise local hire maintenance personnel on operational and technical aspects of aforementioned equipment. Must observe and follow all safety rules and procedures, including wearing required personal safety equipment. Perform other duties and activities as directed. This position is located in Qatar.</li></ul><br><p><b>Qualifications You Must Have:</b></p><br><br><ul><li>A graduate of the US Army Power Generation Equipment Repairer (MOS 52D) course or a graduate of a technical school or manufacturer's course of instruction on diesel power generation equipment, or equivalent On-the-Job Training (OJT) or work experience in troubleshooting, fault isolation, disassembly, repair, assembly and checkout of power generation equipment.</li><li></li><li>Minimum of four (4) years of experience with electro-mechanical troubleshooting, fault isolation, and repair of 15, 30, or 150kW diesel powered power generation equipment.</li><li></li><li>Demonstrated ability to test generators under changing load conditions for variations in performance to ensure all specifications are met or exceeded.</li><li></li><li>Functionally test generators after making repairs to assure compliance with design specifications and standards.</li><li>Individuals must possess mechanical skills including experience with the use of common hand and powered tools, fixtures, templates, and associated refurbishment and modification equipment.</li><li></li><li>Demonstrated basic computer skills for record keeping and parts requisition.</li></ul><br><p><b>Qualifications We Prefer:</b></p><br><br><br><ul><li>Middle East customer experience.</li><li>Graduate of applicable Lechmotoren power generation equipment repair course.</li><li>Graduate of diesel powered power generation equipment repair course.</li><li>Demonstrated experience with Lechmotoren diesel powered 15, 30, or 150kW generators.</li><li>Demonstrated basic knowledge of the Patriot refurbishment, modification, and system integration process.</li><li>Demonstrated knowledge of Patriot peculiar Technical Manuals and associated drawings, schematics, and publications.</li><li>Demonstrated ability to interact with leadership effectively – including customer, Raytheon, teammates, and suppliers.</li><li>Previous experience in International Patriot FMS Programs.</li><li>Experience living and working in an overseas location.</li></ul><br><p><b>Required Education:</b></p><br><br><br><p>Bachelor’s degree <b>in a relevant field </b><i>OR</i> Equivalent experience (typically <b>2–4 years</b> of related professional experience)</p><br><br><br><p><b>What We Offer:</b></p><br><br><br><p>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.</p><br><br><br><p><b>Additional Information:</b></p><br><br><br><p>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products</p><br><br><br><p>#Patriot</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<p>Job Purpose Gather relevant information about plant equipment, piping, and platforms and prepare accurate drawings/diagrams using computer aided 3D design and 2D drafting software (preferably, but no limited to, PDS/SP3D, Microstation E3D, AutoCAD, and SPPID) in order to assist in visual communication about plant functions/design, bills of materials (BOM), and management of change (MOC). Key Accountabilities Data Gathering Make site visits and coordinate with concerned individuals/departments in order to collect as-built information about piping and instrumentation, equipment details, and structural pipe supports Preparation & Updating of Drawings Prepare Plot plan, Key plan, general arrangement drawings, isometrics, piping and instrumentation diagrams (P&IDs), pipe support drawings or any other drawings, Prepare equipmen/piping structural supports/platforms drawings including MTO and BOM, and MOC drawings, in line with Company's drafting standards. Perform site surveys and prepare As-built drawings according to site measurements. Update plant drawings as part of Management of Change (MOC) process. Performing quality checks on drawings prepared internally or externally Validate consistency between engineering drawings and plant databases (tag numbers, equipment IDs, line references) and escalate discrepancies. Control integration of vendor drawings into plant documentation ensuring alignment with existing plant design and standards . Ensure drawing readiness prior to Turnaround (TA) execution by identifying outdated or missing drawings. Support alignment between engineering drawings and asset management systems. Ensure proper capture, tracking, and incorporation of field redlines into final drawings with full traceability. Maintain tracking of drawing status (draft, under review, approved, as-built) and report overdue updates. Information Dissemination Control native files and upload, with assistance frorn RIM personnel, relevant information to the Company's electronic data management system (ECM) in order to ensure that the right information is available to the right personnel at all times. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency. Implement all relevant policies, processes, procedures and instructions of Projects Section so that worl<. is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Projects Section to guarantee employee safety and delivery of high quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies and standards. Capture and communicate lessons learned related to drawing errors, revisions, and field issues. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only</p><p>Qualifications & Experience Education Required: Diploma in Engineering Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Preferred : Bachelor's Degree in Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Experience Required : 3-5 years of experience in the O&G Industry. Preferred : Experience in Petrochemicals Industry.</p>

<p>Job Purpose Gather relevant information about plant equipment, piping, and platforms and prepare accurate drawings/diagrams using computer aided 3D design and 2D drafting software (preferably, but no limited to, PDS/SP3D, Microstation E3D, AutoCAD, and SPPID) in order to assist in visual communication about plant functions/design, bills of materials (BOM), and management of change (MOC). Key Accountabilities Data Gathering Make site visits and coordinate with concerned individuals/departments in order to collect as-built information about piping and instrumentation, equipment details, and structural pipe supports Preparation & Updating of Drawings Prepare Plot plan, Key plan, general arrangement drawings, isometrics, piping and instrumentation diagrams (P&IDs), pipe support drawings or any other drawings, Prepare equipmen/piping structural supports/platforms drawings including MTO and BOM, and MOC drawings, in line with Company's drafting standards. Perform site surveys and prepare As-built drawings according to site measurements. Update plant drawings as part of Management of Change (MOC) process. Performing quality checks on drawings prepared internally or externally Validate consistency between engineering drawings and plant databases (tag numbers, equipment IDs, line references) and escalate discrepancies. Control integration of vendor drawings into plant documentation ensuring alignment with existing plant design and standards . Ensure drawing readiness prior to Turnaround (TA) execution by identifying outdated or missing drawings. Support alignment between engineering drawings and asset management systems. Ensure proper capture, tracking, and incorporation of field redlines into final drawings with full traceability. Maintain tracking of drawing status (draft, under review, approved, as-built) and report overdue updates. Information Dissemination Control native files and upload, with assistance frorn RIM personnel, relevant information to the Company's electronic data management system (ECM) in order to ensure that the right information is available to the right personnel at all times. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency. Implement all relevant policies, processes, procedures and instructions of Projects Section so that worl<. is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Projects Section to guarantee employee safety and delivery of high quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies and standards. Capture and communicate lessons learned related to drawing errors, revisions, and field issues. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only</p><p>Qualifications & Experience Education Required: Diploma in Engineering Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Preferred : Bachelor's Degree in Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Experience Required : 3-5 years of experience in the O&G Industry. Preferred : Experience in Petrochemicals Industry.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><p>Chillers</p><p>Process Area of FCU, AHU, and Ventilation System</p><p>Refrigerant recovery, recycling and purifying System</p><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p><span>To provide </span><span>Level 1</span><span>and Level 2 </span><span>technical support </span><span>as part of the Data Center team </span><span>for</span><span>QatarEnergy’s</span><span>infrastructure </span><span>and end-user technology </span><span>services</span><span>. The role includes handling incidents and service requests, performing routine operational tasks, troubleshooting and resolving common technical issues, monitoring data center and server infrastructure, supporting approved changes, and escalating complex issues in accordance with established procedures. The position contributes to reliable day-to-day IT operations across QatarEnergy sites</span><span>, including </span><span>support for</span><span> Active Directory,</span><span>Microsoft 365</span><span>, SCCM, printers, mobile devices, server monitoring, documentation, and IT inventory activities.</span></p><br><p><strong><span>Key Responsibilities</span></strong></p><br><ul><li><span>Provide </span><span>Level 1</span><span>and Level 2 </span><span>support for infrastructure </span><span>and end-user technology </span><span>services </span><span>as part of the Data Center team, ensuring timely response to incidents and service requests across QatarEnergy sites.</span></li></ul><ul><li><span>Perform routine user administration and support tasks related to Active Directory, Microsoft 365, SCCM, printers, mobile devices, and other approved IT services.</span></li></ul><ul><li><span>Troubleshoot and resolve Level 1 and Level 2 technical issues where within the role scope; document actions taken and escalate complex, recurring, or specialist issues to Engineers or relevant support teams.</span></li></ul><ul><li><span>Carry out standard service request fulfilment activities, including account support, access requests, software deployment support, device configuration, operational checks, and approved first- and second-level support tasks.</span></li></ul><ul><li><span>Monitor data center infrastructure, servers, services, and health dashboards; investigate initial alerts, take approved corrective actions where applicable, and escalate anomalies or service degradation in line with procedures.</span></li></ul><ul><li><span>Support patching, vulnerability remediation, cybersecurity controls, and emergency procedures under approved guidance, including execution of assigned Level 1 and Level 2 operational activities.</span></li></ul><ul><li><span>Assist Engineers during infrastructure upgrades, project activities, testing, and deployment tasks as required.</span></li></ul><ul><li><span>Maintain accurate operational records, technical documentation, standard checklists, and IT inventory information.</span></li></ul><ul><li><span>Provide courteous and clear communication to users, ensuring incidents and requests are handled professionally and in line with service expectations.</span></li></ul><ul><li><span>Support QatarEnergy applications on smartphones and tablets, including basic configuration, troubleshooting, and user assistance.</span></li></ul><ul><li><span>Participate in shift, standby, or on-call support arrangements when required to maintain continuity of IT services.</span></li></ul> <br><strong>Required Experience and Skills</strong><br><p><span>Minimum of 5 years of hands-on technical support experience in IT infrastructure, service desk, data center operations, server support, or a related environment, with exposure to both first- and second-level support activities.</span></p><br><p><strong><span>Professional Certifications</span></strong></p><br><ul><li><span>ITIL Foundation, Microsoft, CompTIA, or equivalent technical certifications will be an advantage.</span></li></ul><p><strong><span>Technical Skills</span></strong></p><br><ul><li><span>Working knowledge of Microsoft Active Directory, SCCM, Azure Active Directory, and standard user/device administration activities, with the ability to perform approved Level 1 and Level 2 support tasks.</span></li></ul><ul><li><span>Good understanding of Microsoft 365 services, including Teams, SharePoint Online, OneDrive, Exchange Online, and Intune support activities.</span></li></ul><ul><li><span>Good knowledge of Windows Server environments, Group Policy concepts, user access support, and common infrastructure services relevant to Data Center operations.</span></li></ul><ul><li><span>Ability to perform routine checks, follow technical procedures, complete standard operational tasks accurately, and carry out approved corrective actions within defined support boundaries.</span></li></ul><ul><li><span>Familiarity with Windows desktop support, basic Linux concepts, and standard troubleshooting methods.</span></li></ul><ul><li><span>Competent in printer setup, configuration, and troubleshooting across networked environments.</span></li></ul><ul><li><span>Familiarity with data center operations, monitoring tools, server health checks, basic infrastructure management, and escalation procedures.</span></li></ul><ul><li><span>Ability to use diagnostic utilities and support tools to identify, record, troubleshoot, and resolve common Level 1 and Level 2 technical issues, or escalate appropriately when specialist support is required.</span></li></ul><ul><li><span>Experience with E-Fax, enterprise SMS platforms, mobile device support, or similar end-user technology services will be an advantage.</span></li></ul><p><strong><span>Soft Skills</span></strong></p><br><ul><li><span>Strong communication</span><span>skills with the ability to explain technical issues clearly </span><span>and professionally to </span><span>users.</span></li></ul><ul><li><span>Customer-focused mindset with a disciplined approach to incident handling, service request fulfilment, and follow-up.</span></li></ul><ul><li><span>Ability to work independently, follow instructions, and collaborate effectively with Engineers, Service Desk teams, Data Center colleagues, and other ICT support groups.</span></li></ul><ul><li><span>Organized</span><span>, reliable,</span><span> and detail-oriented</span><span>,</span><span> with good documentation practice</span><span> and commitment to operational procedures.</span><ul><li><span>Willingness to work in shifts, standby, or on-call arrangements when required.</span></li></ul></li></ul> <br><strong>Educational Qualifications</strong><br><p><span>Technical Diploma in Computer Science, Information Technology, Electronics, or&nbsp;a related field.</span></p><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>JOB PURPOSE / OBJECTIVE Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.?? KEY ACCOUNTABILITIES Routine Duties Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares. Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs). Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment. Ensure that the spares parts used are maintained and available.? Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical. Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site. Takes initiative to identify and implement areas for improvement in HVAC & Lighting. Support emergency planned SD’s and TA related maintenance activities. Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.? Review preventive / Corrective maintenance (PM/CM) checklists as required. Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner. Identify spare parts requirements / material required for equipment overhauling / repairs. Use SAP functionality to plan and execute the scheduled jobs. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc. Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required. Conduct daily toolbox meetings as required.? ? 4.2 KEY ACCOUNTABILITIES Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars. Adhere to and follow all company safety policies, procedures, and Tenets of Operation. Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents. Understand the Q-Safe process and actively participates in accordance with expectations. Actively Participate toolbox meetings and MSCM meetings as required. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Follow up metrics for employee safety performance and to achieve departmental KPI. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required: 2 years Diploma of relevant field. Preferred: Bachelor’s degree in Engineering or relevant Technical degree. Experience Required: 3-5 years of experience in HVAC. Preferred: Experience in Petrochemicals Industry Languages Required: English- proficient. Preferred?:Arabic- working knowledge WORKING RELATIONSHIPS Internal Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group External Vendors, Contractors, and Subcontractors</p>

<p>POSITION SUMMARY YOUR LEGACY STARTS WITH US At The Ritz-Carlton, Doha, we invite you to experience refined luxury where timeless elegance meets true Qatari hospitality. Situated along the pristine shores of the Arabian Gulf for almost 24 years, our 5-star resort features 374 elegantly designed rooms &amp; suites, award-winning restaurants, world-class Spa facilities with a state-of-the-art Fitness Center, and impeccable service that defines our legendary brand. From serene indoor and outdoor pools to a private beach and a Club Lounge for elevated and personalized experiences, every detail perfectly reflects our commitment to excellence. The property is also ideal for events with a wide selection of meetings rooms, stunning wedding venues and a dedicated team that thoughtfully plans and tailors to each unique vision. Whether you re savoring an afternoon tea in our lobby lounge, watching the city skyline sparkle by night in one of our restaurants, or celebrating an important event, The Ritz-Carlton, Doha, presents a truly remarkable setting for life s most meaningful moments. FIND PURPOSE IN YOUR PASSION At The Ritz-Carlton, we firmly believe that our Ladies &amp; Gentlemen are the heart of everything we do and the most important resource in our service commitment to our guests. With passion, genuine care, dedication and pride, we can achieve common goals and grow together while crafting moments that will be remembered forever. Which is why at The Ritz-Carlton, Doha, we are currently seeking passionate individuals to join our esteemed team and bring their own unique expertise to our world-famous service philosophy. As an Elite hotel in the region with a deep generational legacy, we offer you in return: A rewarding career within one of the most recognized and prestigious luxury brands in the world. Personal and professional development plans with curated training materials and guidance from highly skilled and experienced colleagues in the industry. Various opportunities for internal growth both locally and internationally within the portfolio of Marriott International properties. Consistent &amp; reliable support to ensure you always have the tools and knowledge to harness your full potential and reach your goals. A competitive package, inclusive of accommodation, flight tickets, transportation, meals, and more: Exclusive training and leadership development programs Recognition and rewards for exceptional service Preferential Members Rates at Marriott Hotels Globally Dining &amp; Wellness discounts for your family and you Medical Insurance Coverage An HR team dedicated to your success and wellbeing OUR EXPECTATIONS FROM THE ROLE: Monitor property grounds to ensure a pleasant appearance. Maintain the appearance of fountains, planters, or other grounds features by cleaning, replacing or making repairs. Install new flowers, bulbs, grass, trees, and shrubs. Maintain flower beds, baskets, and boxes by watering, removing weeds, trimming, and performing other maintenance. Replace and transplant trees, flowers, and shrubs. Maintain trees and shrubs by trimming and pruning. Trim and edge grass in areas that mowers cannot reach. Maintain lawns by mowing, edging, raking leaves, and performing other lawn maintenance. Install, maintain, and operate irrigation systems. Remove and bag trash from all exterior trash cans. Operate dump trucks, tractors, trucks, or utility vehicles to transport equipment, supplies, materials, and debris. Wash, clean, and re-fuel all equipment after use. Follow all company and safety and security policies and procedures; report defective equipment, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; protect company assets. Support team to reach common goals. Ensure adherence to quality expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Removal of snow and maintenance of ice management (if applicable). Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: high school diploma or G.E.D. equivalent.</p><p>Related Work Experience: At least 1 year of related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>REQUIRED QUALIFICATIONS License or Certification: Valid Driver s License</p>

<p>Provide technical guidance to support the Transportation Network and Airfield Pavement Activity Management Plan (TNAP) AMP as required by the contract. This position will be in support of the Air Force Contract Augmentation Program (AFCAP), and it is located at Al Udeid Air Base (AUAB), Doha, Qatar. Essential <b>Responsibilities</b>:</p><p>• Provides management service of airfield pavements and transportation infrastructure networks to enable the safe and efficient movement of people, equipment, aircraft, and material across the installation and airfield.</p><p>• Advise and assist in a portfolio-wide view of facilities and linear infrastructure at the highest level.</p><p>• Provide technical guidance to support the Heavy Pavements Sub-AMP, Pavements/Airfield Pavements Sub-AMP duties and responsibilities.</p><p>• Responsible for an asset lifecycle management portfolio containing all Air Force-owned roads, bridges, parking lots, curbs and gutters, traffic signals, signage, marking, sidewalks, walkways, rail systems, docks, final denial barriers (FDB), FDB control systems, FDB supporting safety systems and traffic management and planning.</p><p>• This AMP Manager s subject matter expertise shall lend itself to providing the Government with recommendations on how best to invest in the assets under their purview and align its efforts under four main lines of effort: Asset Visibility, Requirements, Planning, and Performance.</p><p>• Advise and assist the Government to ensure the asset inventory reflects sufficient level of detail to enable investment decisions.</p><p>• Advise and assist with the development of the Future Years Defense Program +3 (FYDP+3) for infrastructure pavements.</p><p>• Conduct regular quality assurance (QA) reviews of data and use gap analysis to identify where Sub-AMP and subject matter experts shall collect additional data.</p><p>• Implement data standards for assets within respective portfolios and provide guidance to Sub-AMPs and the Built Infrastructure Assessment Team (BIAT) on which inventory to prioritize and advise on how often and when to conduct condition assessments.</p><p>• Support condition assessments and provide guidance to ensure relevant data has visibility and analysis.</p><p>• Work with Operations Flight shops, subject matter experts, and the Engineering Flight to advise and assist the Government on the condition assessment methodology and approach to ensure the data is adequate and the data resulting from the condition assessments are properly documented.</p><p>• Advise and assist the Government in defining and prioritizing requirements within respective activities.</p><p>• Integrate requirements from Sub-AMPs within their activity and identify target years for project development, design, and execution.</p><p>• Advise and assist on creating requirements to support future opportunities deriving from asset analysis.</p><p>• Utilize appropriate systems to identify investment requirements at facility or equivalent master-asset level to repair/sustain systems throughout their life cycle.</p><p>• Advise and assist on developing requirements which may be executed through organic Operations Flight labor or through projects managed in the Engineering Flight.</p><p>• Perform work planning, including grouping of requirements into opportunities and developing a rough cost and work estimate for them.</p><p>• Lead semi-annual AMP working groups. AMP working groups should discuss the status of asset visibility, the current risk in asset portfolios, project candidates, performance assessments of key performance indicators (KPI), a review of any completed AMP objectives, and a summary of AMP objectives to accomplish in the coming year.</p><p>• When construction impacting the TNAP AMP is completed the TNAP AMP Manager will update the Pavements Condition Index in PAVER with no more than one (1) error per update.</p><p>• Advise and assist the Government in the development of metrics and KPIs to ensure activities deliver optimal service.</p><p>Work Environment, Physical Demands, and Mental Demands:</p><p>• Able to lift, carry, and push supplies and boxes up to 50 pounds.</p><p>• Personnel should be aware of moving on short notice and under adverse conditions.</p><p><b>Other Responsibilities:</b></p><p>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Position Knowledge, Skills and Abilities Required:</b></p><ul><li>Civil Engineer Bachelor s Degree from an ABET Accredited University with at least five (5) years experience in pavement, construction, and maintenance and transportation infrastructure management.</li><li>Experience with pavement management systems is preferred.</li><li>Must have an equivalent of an Air Force minimum 5 level or equal and 5 years experience in pavement maintenance and repair, asphalt paving, concrete paving, and pavement marking.</li><li>Prior R&amp;R experience preferred.</li><li>Must be familiar with PAVER, serve as the engineering expert and liaison for the Traffic Safety Council, and work with the sub-AMP managers assigned to areas of TNAP responsibilities.</li><li>Required to complete AFIT WENG 200, WENG 400, WENG 555, WMGT 241, WMGT 331, WMGT 341, WMGT 417 required and WENG 550 desired. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date.</li><li>Must be familiar with NexGen IT and BUILDER SMS.</li><li>Ability to exercise discretion and make effective decisions. Solid communications and strong interpersonal skills a must.</li><li>Strong ability to work and lead as a member of a diverse, dynamic team.</li><li>Outstanding problem-solving skills and sound judgment.</li><li>Computer literate; can use Microsoft Office and Project, etc.</li><li>Must be a USN to fill this position.</li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance.</li><li>Possess a valid state issued driver s license or international driver s license and passport.</li><li>Prior overseas government contracting experience preferred.</li></ul>