وظائف مهندس ميكانيكا معدات ثقيلة

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary The Inspector – QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements.<br> This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization’s commitment to delivering high-quality products and services.<br> Roles &amp; Responsibilities Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications.<br> Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements.<br> Verify material test certificates (MTCs) and maintain traceability.<br> Support pressure tests, NDT activities, and dimensional inspections.<br> Ensure all measuring and testing equipment are properly calibrated and used as per defined standards.<br> Prepare inspection reports, checklists, and non-conformance reports (NCRs).<br> Maintain accurate and detailed QA/QC records for traceability and audit purposes.<br> Identify and report deviations or non-conformances to the QA/QC Engineer.<br> Assist in root cause analysis and follow-up of corrective and preventive actions.<br> Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards.<br> Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented.<br> Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements.<br> Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company’s HSE standards QHSE Responsibilities Comply with all QHSE standards, policies, and procedures relevant to your work.<br> Actively participate in QHSE meetings and complete all required safety inductions and trainings.<br> Identify and report unsafe conditions; take corrective action where possible within your scope.<br> Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly.<br> Support a safe work environment by cooperating with safety practices and encouraging others to do the same.<br> Refer to the OHSMS Manual, Section 4.<br>4.1, for further clarification on individual QHSE responsibilities and accountability.<br> Education &amp; Certificates Diploma or Bachelor's Degree in Mechanical or Electrical Engineering.<br> NDT Level II (UT/RT/PT/MT) preferred.<br> Experience Minimum 8 years of working experience as inspection personnel for Oil &amp; Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNG.<br> Familiar with electrical and instrumentation specific codes and standards (i.<br>e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079.<br> etc.). Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects.<br></span> </div>

Transport & Ramp Operations Team Leader – Aviation Catering Logistics ???? Doha, Qatar<br><br> ???? Qatar Airways ✈️ Aviation & Airport Operations Full-time On-site<br><br>The Context Qatar Airways, the award-winning national carrier of Qatar, is seeking a Transport Team Leader to manage ground transport, catering delivery, and ramp dispatch operations at Hamad International Airport. Operating in a high-density hub environment, the role ensures strict adherence to on-time performance (OTP), airside safety standards, and flawless flight loading across passenger, charter, and VIP aircraft.<br><br>What The Role Covers<br><br>Airside Fleet Dispatch & Catering Delivery You lead the real-time dispatch and execution of catering transport fleets across all aircraft turnarounds, including complex ultra-long-haul and VIP flights. You ensure all loading, offloading, and hi-loader vehicle positioning strictly align with airline specifications, food safety regulations, and airport ramp safety protocols.<br><br>Operations Management & Root Cause Incident Analysis You conduct thorough Voyage Report (VR) investigations for operational delays or discrepancies within the transport department, identifying root causes and defining corrective actions. You track On-Time Performance (OTP) data, oversee vehicle maintenance logs, and ensure airside safety and PPE compliance across all operational teams.<br><br>Resource Rostering & Team Leadership You oversee shift scheduling, overtime allocation, and vacation planning for catering drivers and equipment operators under the guidance of Duty Supervisors. You evaluate team performance, manage equipment allocation (tablets, radios, temperature probes), and identify targeted training needs for new and existing operational staff.<br><br>Candidate Profile<br><br>High School Diploma with 2+ years of relevant experience, or a Bachelor's Degree with 1+ years of experience in airport ground or catering transport operations Valid Heavy Goods Vehicle (HGV) driving license Hands-on knowledge of aircraft loading procedures, hi-loader catering vehicles, and ground fleet management Experience in airside operations, shift rostering, and leading driver or equipment operator teams Fluent in professional spoken and written English, with high attention to detail and ability to work under pressure in shift environments<br><br>Why This Role Stands Out - Supply Tech Nexus Take Managing airside logistics and fleet dispatch at Hamad International Airport offers unmatched operational exposure within one of the world's premier aviation hubs. Ground handling and airline catering logistics demand minute-by-minute accuracy, making high-performing shift leaders vital to maintaining global flight schedules.<br><br>As Qatar Airways continues to expand its global flight network, operational team leaders with direct airside HGV experience, ramp safety mastery, and shift rostering capabilities remain crucial assets. This role provides an ideal step-up for ground logistics professionals seeking supervisory experience within a world-class airline environment.<br><br>Salary Benchmark - Qatar Market (2024/2025) For a Transport Team Leader / Coordinator With 2–4 Years Of Experience, Based In Doha<br><br>Base salary: QAR 12,000 - 18,000/month<br><br>Curated and published by Supply Tech Nexus - the job platform dedicated to supply chain and logistics professionals across the MENA & GCC region.<br><br>Victor L. | Supply Tech Nexus | Logistics<br><br> WMS SAP GCC Region

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Superintendent (Block Lead): For managing a distinct area or discipline within the CONTRACTOR s area. Responsible for managing a distinct area or discipline within the CONTRACTOR s area of responsibility ensuring that work is being planned and executed in a safe and efficient manner to meet the TA schedule and work standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have more than 15 years experience in maintenance work preferably mechanical in the Petrochemical or Petroleum Refining industry of which at least 10 years as Supervisor, and 5 years as Superintendent. Educational qualifications: HND in Mechanical discipline or standards-based qualification.Must be proficient in reading, writing and speaking English. (IELTS 8 Equivalent) Must be able to work with computers utilising Microsoft Windows and Office suite of packages. Must be fully aware of the safety aspects of working in a Petrochemical industry. Must be fully aware of quality systems and can perform regular audits to convince the COMPANY that he complies with it. Must be familiar with different Process Equipment, welding techniques, welding tools and equipment, testing and quality control measures. Must be aware of Industry Standards, DEPs and Relevant International Codes. Must have proven leadership qualities &amp; be able to organise up to 100 Engineers/ Supervisors of different disciplines and manage the site organisation independently. Must be able to organise the materials and equipment for his job. Must be able to plan associated activities and acquire the resources to mobilise all required personnel and equipment on time. Must be conversant with the CONTRACT and the Contracting System and must have authority to act on all aspects of the work for the CONTRACTOR. Must have good skills for managing a maintenance organisation even during emergencies. Must be experienced in using CMMS to report cost and KPI performance. CONTRACTOR Superintendent shall have sufficient authority to act independently and authoritatively on the COMPANY-related management issues without having to refer to the CONTRACTOR s off-site head office or CONTRACTOR s Site Manager for most decisions.</p>

<p>Job Description: To supervise and coordinate maintenance, troubleshooting, repair, inspection, and overhaul activities for lifting equipment, including mobile cranes, forklifts, telehandlers, scissor lifts, and manlifts, while overseeing diesel engine overhaul operations to ensure equipment reliability, safety compliance, and operational efficiency. Key Responsibilities: Maintenance & Repair Supervision: Supervise daily maintenance and repair activities for: Mobile cranes Forklifts Telehandlers Scissor lifts Boom lifts / manlifts Allocate manpower, tools, and workshop resources effectively. Ensure preventive and corrective maintenance schedules are executed on time. Diagnose complex hydraulic, mechanical, transmission, and electrical faults. Monitor equipment downtime and implement corrective actions to improve availability. Engine Overhaul Supervision: Oversee complete overhaul and rebuilding of diesel engines used in heavy equipment. Supervise dismantling, inspection, measurement, machining coordination, reassembly, and testing activities. Verify engine tolerances, clearances, and component conditions according to OEM standards. Ensure proper use of precision measuring instruments. Inspection & Troubleshooting: Conduct technical inspections and root cause analysis for recurring failures. Review condition reports and maintenance records. Ensure proper troubleshooting procedures are followed by technicians. Safety & Compliance: Ensure all maintenance activities comply with company HSE procedures and lifting equipment safety standards. Conduct toolbox talks and enforce safe workshop practices. Ensure equipment inspections and certifications are maintained as required. Team Leadership: Supervise mechanics, hydraulic technicians, welders, and electricians. Provide technical guidance and on-the-job training. Evaluate technician performance and recommend training needs. Documentation & Reporting: Prepare maintenance reports, breakdown reports, and job completion records. Maintain spare parts usage records and coordinate material requirements with stores/procurement. Assist in preparing maintenance KPIs and monthly reports. Coordination: Coordinate with operations, planning, procurement, and third-party inspectors/vendors. Liaise with OEM representatives when required. Qualifications Education: Diploma or Degree in Mechanical Engineering, Heavy Equipment Engineering, or related technical field. Technical certification in heavy equipment maintenance is an advantage.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience: Minimum 7–10 years of experience in maintenance and repair of heavy lifting equipment. Minimum 3–5 years in a supervisory role. Hands-on experience with: Mobile cranes Forklifts Telehandlers Aerial work platforms (scissor lifts/manlifts) Diesel engine overhaul Experience in construction, oil & gas, industrial services, or equipment rental companies preferred. Technical Skills: Strong knowledge of: Hydraulic systems Diesel engines Transmission systems Brake systems Electrical/electronic control systems Load handling systems Ability to read hydraulic and electrical schematics. Familiarity with OEM maintenance procedures and manuals. Proficient in troubleshooting mechanical and hydraulic failures. Knowledge of preventive maintenance systems and workshop operations.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Implementing the elements of management system applicable to your function</li> <li>Your own safety and the safety of others who may be affected by business, whether or not the activity is under your direct control and proactively participate in all safety matters affecting the construction of the project</li> <li>Preventing pollution to the environment, either by you or by others in project</li> </ul><br><p>* Co-ordinating / attending the inspection, tests and punch listing on behalf of Company* Undertake familiarization with Project and discipline specific inspection documentation to ensure understanding of contract requirements<br>* Implement quality inspection procedures on construction activities, suppliers, subcontractors to ensure compliance with project specification* Ensure that the documentation generated by the contractor for inspections, tests, surveillance and surveys meets the requirements of the Project Quality Plan, ITPs and project requirements<br>* Ensure completion of relevant forms and reports on inspections and tests undertaken by the contractor and maintenance of inspection records* Communicating effectively with the contractor, third parties and end users at your level<br>* Ensuring that all equipment used for measuring and testing is in calibration and such records are available* Perform Surveillance of project site construction activities to identify problems and potential or actual non-conformances and to assist in proposing corrective and preventive actions<br>* Liaise with other site Supervisors and Contractor to be aware of planned and completed construction works to ensure NDE is planned and performed* Assist Sr. QA/QC Engineer in the review/approval of Contractor QA/QC documents such as QCPs, ITPs, WPS/PQRs/ Special Processes / Personnel qualifications, Material Approval Requests, Vendor Documents, MRBs, Project Dossiers etc.<br>* Monitor / Witness Contractor's material preservation, fabrication, installation, inspection and testing activities related to the Structural Steel, Process Piping, Pipelines, tanks, Rotating and Static equipment including internals installation and associated preceding and succeeding interface activities* Witness / verify all inspection and testing activities related to the Welding, NDT, PWHT, Hardness testing, pressure testing of valves, Alloy Verification, painting etc., starting from the procedures / personnel qualification till the respective systems hydro testing and ensure compliance with the project requirements<br>* Closely monitor the performance of special process and personnel, weld Repairs / NDT status etc., Controls exercised by the contractor and appraise Sr. QA/QC engineer in case of any concerns* Participate in the receiving inspection of project permanent materials and verification of associated documentation for traceability of Piping bulk materials, Structural steel, Static and Rotating equipment, Consumable like welding electrodes / filler wires / gases, Painting / wrapping materials etc.<br>* Follow-up on Corrective Actions to close-out non-conformances* Monitor trends of non-compliance with requirements and feedback on the status of Contractor's performance<br>* Initiate Surveillance / NCR's for SR. QA/QC Engineer's approval* Maintaining relevant QA/QC documents / records</p><br><br><ul> <li>Mechanical/Metallurgical/Materials Engineering degree, technical diploma and experience with direct exposure to quality Control in multi-discipline construction environment. Preferably having formal training in QC and membership with recognized charts or other professional institutions.</li> <li>CSWIP 3.2 / AWS-SCWI Sr. Welding Inspector and NDT Level-II (ASNT, ISO, etc.) certification is a must. Preferred to have BGAS grade-2 / NACE Level-2 Painting Inspector certificate. Other equivalent certifications provided by internationally recognized organizations can be accepted.</li> <li>10 years' experience for Bachelor's degree engineers and 15 years' experience for technical diploma holders in similar position in Oil &amp; Gas sector.</li> <li>Experience in GCC is desirable</li> <li>Candidate should have hands on working experience related to storage tanks, piping, pipeline welding inspection and testing. Installation of static &amp; rotating equipment</li> <li>The candidate should have sound working knowledge on QC aspects and various testing requirements related to major oil &amp; gas / petrochemical focused construction projects</li> <li>Duties are normally complex and vary and require ability to work well with contractor's personnel and colleagues at all levels in multidisciplinary, multicultural environments.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p></section>

<p><b>Qualifications:</b></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p><b>Additional Qualifications:</b></p><p>&nbsp; Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS’s and PDN’s.</p><p>&nbsp; Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>&nbsp; Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>&nbsp; Provide tuning for controls and equipment.</p><p>&nbsp; Test equipment and controls after maintenance has been done.</p><p>&nbsp; Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>&nbsp; Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>&nbsp; Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool’s standards.</p><p>&nbsp; May provide assistance to control engineer in design/drawings of modifications</p><p><strong>Desired Candidate Profile</strong></p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><p><span><b><span>Lathe operation</span></b>: Set up and operate universal lathes and variable spindle speed lathes.</span><br></p><br></li><li><p><span><b><span>Machine handling</span></b>: Work specifically with C 350 TM, C 11MS, CU 630, and CU 1250 models.</span><br></p><br></li><li><p><span><b><span>Precision machining</span></b>: Produce components to exact tolerances using appropriate tooling and fixtures.</span><br></p><br></li><li><p><span><b><span>Blueprint reading</span></b>: Interpret technical drawings and specifications to plan machining operations.</span><br></p><br></li><li><p><span><b><span>Quality inspection</span></b>: Use micrometers, calipers, and gauges to verify dimensions.</span><br></p><br></li><li><p><span><b><span>Maintenance</span></b>: Perform routine checks and basic maintenance on lathe machines.</span><br></p><br></li></ul><br><span>Requirements<b>Qualifications</b><br></span><ul><li><p><span>Diploma/Certificate in Mechanical/Precision Machining.</span><br></p><br></li><li><p><span>3+ years of experience operating universal lathes.</span><br></p><br></li><li><p><span>Strong knowledge of machining safety standards.</span><br></p><br></li></ul><br> </div>

<p>Has significant experience, technical knowledge and valid license to operate a fire-fighting vehicle, (e.g. single cab or double cab fire tender)</p><p>Capable of performing minor vehicle maintenance.</p><p>Has significant knowledge in Heavy vehicle and Pump Operations.</p><p>Has ability to carry out vehicle inspection.</p><p>Has knowledge on fire safety inspection and maintenance of fire extinguishers, indoor/outdoor hydrants and fire hoses.</p><p>Has relevant knowledge in industrial firefighting system such water-based system, foam deluge system.</p><p><strong>Desired Candidate Profile</strong></p><p>Has background experience as a fire fighter in an oil/gas, petrochemical, power and water utilities or equivalent industry for a minimum of 5 years.</p><p>License to operate/ drive a heavy vehicle (specifically fire fighting vehicle) with previous valid license from authorized issuing party (e.g. Traffic Directorate)</p><p>(MUST) NFPA 1001Certification as Firefighter 1and 2</p><p>Attended relevant training on handling hazardous events or incidents such as HAZMAT Awareness and HAZMAT Operations</p><p>Physically and Medically Fit</p><p>Age limit: 45 years old</p><p>Must have excellent communication skills (Verbal and Written)</p><p>Advance First Aider and knowledge on AED.</p>

Additional Information<br><br>Job Number 26109938<br><br>Job Category Engineering & Facilities<br><br>Location Building No. 3, Street No. 353, Lusail, Qatar, Qatar, 4010VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>Autograph Collection, her biri benzersiz ve unutulmaz deneyimler sunan, dört ve beş yıldızlı bağımsız otellerden oluşan, büyüyen bir koleksiyondur. Kalitesi, orijinalliği, cesur karakteri ve seyahat edenlerin kişisel tarzı ve macera duygularına hitap eden bir dizi benzersiz deneyimler sunması bakımından her otel özenle seçilmiştir. Tüm Autograph Collection otelleri, markanın hedef tüketicisi olan Bireyselciyi çekmeye çalışır. Bireyselci, seyahati kendi kişisel hikayelerine bir şeyler katmak için bir fırsat olarak kullanan kişidir. Özünde, burada sadece bir dinlenme yerinden çok daha fazlasını sunduğumuzdan, ister kişisel ister kurumsal seyahat için olsun, otellerimizi kendileri bizzat seçerler. Autograph Collection'a katılarak, Marriott International çatısı altındaki bir markalar portföyünün parçası olursunuz. İşinizi en iyi şekilde yapabileceğiniz yeri tercih edin , amacınızı gerçekleştirmeye başlayın , mükemmel bir küresel ekibin üyesi olun ve hayallerinize ulaşmayı başarın .

<p>Shall have minimum qualification required for the position Diploma or equivalent; Shall have a minimum experience of 10 years in planning or similar experience in a Pellet plant / Cement plant / Steel plant or any other Heavy Process industry; Shall supervise and manage the workforce, plan and coordinate jobs execution and resource allocation; Shall generate the required daily, weekly and monthly reports which is to be sent to client Contract Controller; Shall carry out on site supervision. Shall handle the Occupational Health and Safety tasks; Shall be able to monitor/follow up the activities. Shall be capable to work with logistics and material planning.</p><p><strong>Desired Candidate Profile</strong></p><p>Shall have minimum qualification required for the position Diploma or equivalent; Shall have a minimum experience of 10 years in planning or similar experience in a Pellet plant / Cement plant / Steel plant or any other Heavy Process industry; Shall supervise and manage the workforce, plan and coordinate jobs execution and resource allocation; Shall generate the required daily, weekly and monthly reports which is to be sent to client Contract Controller; Shall carry out on site supervision. Shall handle the Occupational Health and Safety tasks; Shall be able to monitor/follow up the activities. Shall be capable to work with logistics and material planning</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>• 5+ years of experience as a </span><b><span>Millwright / Mechanical Maintenance Technician</span></b><br><br><span>• Experience in </span><b><span>industrial / Oil &amp; Gas / heavy equipment maintenance</span></b><span> preferred</span><br><br><span>• Skilled in </span><b><span>installation, alignment, maintenance &amp; repair of rotating equipment</span></b><br><br><span>• Experience with </span><b><span>pumps, gearboxes, compressors, motors, conveyors &amp; mechanical equipment</span></b><br><br><span>• Knowledge of </span><b><span>bearing replacement, shaft alignment, lubrication &amp; mechanical troubleshooting</span></b><br><br><span>• Ability to read </span><b><span>mechanical drawings and equipment manuals</span></b><br><br><span>• Experience in </span><b><span>preventive and corrective maintenance</span></b><span> activities</span><br><br><span>• Strong knowledge of </span><b><span>hand tools, power tools &amp; mechanical maintenance practices</span></b><br><br></span><br> </div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>