وظائف مهندسين ميكانيكا في قطر

Role Description : QA/QC MEP Engineer, is a full-time, on-site role based in Doha, Qatar. We are looking for a Technical MEP Engineer to join our team and support our MEP trading operations.<br>The ideal candidate will have strong technical knowledge of MEP products and experience in reviewing specifications, preparing material submittals, and ensuring compliance with project requirements.<br>Key Responsibilities:• Prepare and review MEP material submittals and technical documentation.• Review product datasheets, catalogues, drawings, and manufacturer documents.• Verify technical compliance of MEP materials against project specifications.• Prepare compliance statements, technical comparison sheets, and deviation reports.• Coordinate with suppliers, manufacturers, consultants, and internal teams for technical clarifications.• Support product selection and provide technical recommendations.<br>Requirements:• Bachelor’s degree in Mechanical/Electrical Engineering or related field.• Experience in MEP materials, trading, contracting, or construction industries.• Good understanding of HVAC, plumbing, electrical, and fire protection systems.• Ability to interpret technical specifications and engineering documents.*Strong attention to detail and documentation skills.

Role Description The Technical MEP Engineer – Trading Division is a full-time, on-site role based in Doha, Qatar. We are looking for a Technical MEP Engineer to join our team and support our MEP trading operations.<br>The ideal candidate will have strong technical knowledge of MEP products and experience in reviewing specifications, preparing material submittals, and ensuring compliance with project requirements.<br>Key Responsibilities:• Prepare and review MEP material submittals and technical documentation.• Review product datasheets, catalogues, drawings, and manufacturer documents.• Verify technical compliance of MEP materials against project specifications.• Prepare compliance statements, technical comparison sheets, and deviation reports.• Coordinate with suppliers, manufacturers, consultants, and internal teams for technical clarifications.• Support product selection and provide technical recommendations.<br>Requirements:• Bachelor’s degree in Mechanical/Electrical Engineering or related field.• Experience in MEP materials, trading, contracting, or construction industries.• Good understanding of HVAC, plumbing, electrical, and fire protection systems.• Ability to interpret technical specifications and engineering documents.• Strong attention to detail and documentation skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>We are seeking for a Project / Planning Engineer who will be responsible for planning, scheduling, coordinating, and monitoring engineering and maintenance projects within the oil &amp; gas and energy sectors. The role ensures projects are executed safely, efficiently, and within approved timelines while supporting project controls, resource planning, and stakeholder coordination.</span></span></p><br><p><b><span><span>Key Responsibilities</span></span></b></p><br><ul><li><span><span>Develop and maintain project schedules and execution plans.</span></span></li><li><span><span>Monitor project progress and ensure adherence to approved timelines.</span></span></li><li><span><span>Coordinate with engineering, procurement, and operations teams.</span></span></li><li><span><span>Track project milestones, risks, and resource requirements.</span></span></li><li><span><span>Prepare progress reports and management updates.</span></span></li><li><span><span>Support project budgeting, forecasting, and cost control activities.</span></span></li><li><span><span>Ensure compliance with project specifications, quality standards, and HSE requirements.</span></span><br></li></ul><br><span>Requirements</span><ul><li><span><span>Bachelor's Degree in Mechanical Engineering.</span></span></li><li><span><span>PMP, Primavera P6, MS Project, or equivalent project management certification preferred.</span></span></li><li><span><span>Minimum 10 years of overall experience in oil &amp; gas, energy, or industrial projects.</span></span></li><li><span><span>Minimum 5 years of experience as a Project Engineer or Planning Engineer.</span></span></li><li><span><span>Experience in rotating equipment, turbomachinery, compressors, pumps, or turbine projects preferred.</span></span></li><li><span><span>Strong understanding of project lifecycle management, scheduling, budgeting, and execution.</span></span></li><li><span><span>Proficient in project planning software and reporting tools.</span></span></li></ul><br> </div>

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>The Principal Mechanical Engineer is the senior technical owner for catheter components in the portfolio.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Own system-level mechanical architecture for console and cart platforms, including structures, enclosures, mechanisms, thermal management, serviceability, and manufacturability. Lead design and development of plastic/composite parts using injection molding and RIM molding; drive DFM/DFS and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, trade studies, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems.<br><br><br>Education & Work Experience:<br><br>B. S. or M. S. in Mechanical Engineering or closely related discipline.15+ years of experience in complex capital equipment or electro-mechanical product development, including regulated products. Direct experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Demonstrated track record as a lead/principal engineer or product design owner for console or cart-based systems from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Advanced Solid Works proficiency. Experience leading cross-functional development in a regulated environment. Background in large console/cart systems that integrate fluid handling, power, and complex electronics.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>The Principal Mechanical Engineer is the senior technical owner for catheter components in the portfolio.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Own system-level mechanical architecture for console and cart platforms, including structures, enclosures, mechanisms, thermal management, serviceability, and manufacturability. Lead design and development of plastic/composite parts using injection molding and RIM molding; drive DFM/DFS and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, trade studies, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems.<br><br><br>Education & Work Experience:<br><br>B. S. or M. S. in Mechanical Engineering or closely related discipline.15+ years of experience in complex capital equipment or electro-mechanical product development, including regulated products. Direct experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Demonstrated track record as a lead/principal engineer or product design owner for console or cart-based systems from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Advanced Solid Works proficiency. Experience leading cross-functional development in a regulated environment. Background in large console/cart systems that integrate fluid handling, power, and complex electronics.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

We Are Hiring: Sales Engineer – Qatar<br><br>Sun Power Gen is looking for a motivated and experienced Sales Engineer to join our team in Qatar.<br><br>Key Responsibilities<br><br>Develop and maintain relationships with existing and potential customers Promote and sell pneumatic products, industrial spare parts, and industrial automation products Identify new business opportunities and achieve assigned sales targets Conduct regular customer visits and generate qualified sales enquiries Follow up on enquiries, prepare quotations, and negotiate orders Coordinate with internal teams to ensure timely order execution and customer satisfaction Monitor market trends, customer requirements, and competitor activities Prepare sales reports and maintain accurate records of customer interactions and opportunities<br><br>Experience Requirements<br><br>2 to 5 years of local sales experience in Qatar Experience in selling pneumatic products, industrial spare parts, or industrial automation products Good knowledge of Qatar’s industrial customers, market segments, and business environment Strong communication, negotiation, and customer relationship management skills Valid Qatar driving licence is mandatory<br><br>Education<br><br>Diploma in Mechanical Engineering, or Bachelor’s Degree in Engineering.<br><br>Preferred Candidate<br><br>The ideal candidate should be proactive, target-driven, technically sound, and capable of independently managing customers and business development activities in the Qatar market.<br><br>Interested candidates may apply through the post or you can share the updated CV at admin.spme@sunpowergen.com with the subject line: Application – Sales Engineer – Qatar

The Mechanical Fitter is responsible for maintaining, troubleshooting, and repairing and overhauling machinery to company standards.<br>Responsibilities<br>Apply skills and knowledge and ability to ensure target production throughput rate or objectives are safely executed in line with Section Plan, KPIs, Qatar Shipyard Technology Solutions Values and IMS system. Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures and any legislative requirements. Adhere to health, safety, security and environmental policies, procedures, instructions and controls for the safety of self and others. Demonstrates proficiencies in pneumatics, hydraulics, engines, controls, machine component clearances / fits and an overall understanding machine operation and function. Ensure compliance to quality management procedures and controls to deliver high quality services and products. Troubleshoot and repair electrical and mechanical problems related to the production equipment. Assist Supervisor and Engineer in preparation of Root Cause Analysis Reports. Identify machine defective components and parts and communicate this to Supervisor and Engineer. Assist Supervisor and Engineer in commissioning of new machinery or re-commissioning of repaired machinery. Read technical drawings, work orders and production schedules to determine product or job instructions and specifications. Ensure that jobs are carried out as per schedule and steps stipulated in the maintenance job cards. Use and place materials in an economical manner. Performs work safely and utilizes safety equipment properly. Understands and follow all yard safety rules and regulations. Maintains quantum and quality of work set. Maintains tools and equipment. Maintains and upkeep housekeeping. Follows instructions from his superior and carry out his tasks in a safe and productive manner. Follows all safety procedures and report lapses, if any. Perform any other assigned duties and responsibilities. Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.<br>Qualifications<br>Technical Certificate in Machine Maintenance, Mechanical Maintenance or Electrical Maintenance. Or Machine Repair Apprenticeship<br>Required Skills<br>Skills and knowledge related to machinery maintenance and repair.<br>Preferred Skills<br>Mechanical Maintenance, Preventive Maintenance, Corrective Maintenance, Machinery Troubleshooting, Mechanical Repair, Hydraulic Systems, Pneumatic Systems, Industrial Equipment Maintenance, Rotating Equipment Maintenance, Fault Finding & Diagnostics, Machine Overhaul Commissioning & Recommissioning, Technical Drawing Interpretation, Equipment Inspection, Root Cause Analysis (RCA), Plant Maintenance, Workshop Maintenance, Shipyard Operations, Permit to Work (PTW), HSE Compliance

<h2 class=\"h5\">وصف الوظيفة</h2> <div class=\"t-break\" data-jb-field=\"description\"> <p>الاتصال<br>الاتصال الداخلي:<br>• مشرف أعمال<br>• زملاء العمل<br>الغرض:<br>• تحسين جودة ونطاق العمل<br>• تنسيق الأنشطة المتعلقة بتنفيذ المسؤوليات<br>الاتصال الخارجي:<br>غير مطلوب<br>الغرض:<br>غير مطلوب<br>الصحة المهنية والسلامة والبيئة<br>المساءلة:<br>مسؤولون عن أفعالهم وسهوهم.<br>المسؤولية:<br>اتباع أنظمة العمل الآمنة المتفق عليها؛ اتباع التدريبات والتعليمات؛ والإبلاغ عن الحوادث والحوادث القريبة.<br>السلطة:<br>إيقاف العمل إذا رأوا أن العمل غير آمن.</p><br><br>المسؤوليات:<br><p>الأدوار والمسؤوليات الرئيسية<br>• يقوم بأعمال الإصلاحات الميكانيكية الكبرى والمتخصصة وإصلاح المحركات البحرية الديزل (المحركات الرئيسية والمحركات المساعدة) باستخدام الأدلة التقنية<br>• فحص، إصلاح وتجديد محركات البحر، النظام الهيدروليكي، ووحدات الدفع الأمامي والخلفي.<br>• تشغيل الأدوات اليدوية والكهربائية المرتبطة بمحرك ومعدات السفينة<br>• إزالة وتثبيت وتبديل المحامل والزعانف الذيلية والدوّارات.<br>• يكتب المواصفات ويوصي بشراء قطع غيار محركات بحرية<br>• إجراء overhaul كامل لجميع أنواع المضخات والضاغطات والصمامات وغيرها من المحركات<br>• معالجة، ووسم وتثبيت أجزاء المعدات. يحافظ على نظافة منطقة العمل قبل إعادة التجميع، يضمن المواصفة الصحيحة لعزم الدوران. التأكد من طلب القطع الصحيحة عن طريق المشرف<br>• العمل بشكل مستقل بتوجيه من مشرف الميكانيكا/قائد المجموعة.<br>• إجراء overhaul لأجهزة التوربوچارجر.<br>• إزالة، وإعادة تركيب وصلات الحقن الهيدروليكي والتوربينات المحورية.<br>• ضمان أن تتم جميع الأعمال بطريقة آمنة وبامتثال لإجراءات ضمان الجودة والأدلة المعتمدة في الأقسام.<br>• التأكد من أنه لديه جميع المعلومات اللازمة لأداء الواجبات الموكلة.<br>• تشخيص، ضبط، إصلاح، أو overhaul لأي نوع من محركات الديزل.<br>• أي مهام ومسؤوليات أخرى يكلف بها الإدارة بما في ذلك جميع الأعمال الميكانيكية.</p><br><br>المؤهلات:<br><p>المؤهل/الخبرة/المهارات الدنيا<br>التعليم والمؤهل المهني:<br>المدرسة الثانوية أو المدرسة الثانوية، شهادة ITI أو ما شابه في محركات الديزل، ويفضل البحرية<br>الخبرة المهنية:&nbsp;<br>6 سنوات كمهنّي يعمل على محركات الديزل البحرية وعلب التروس<br>الخبرة الجغرافية:&nbsp;<br>غير متاح<br>مهارات الحاسب الآلي:&nbsp;<br>معرفة حاسوب أساسية ستكون ميزة إضافية<br>مهارات اللغة:&nbsp;<br>الألمانية/الهندية مفضلة<br>المعرفة السوقية/الصناعية/العملية:&nbsp;<br>غير متاح<br>&nbsp;</p><br> </div>}

We are currently hiring for a Senior Mechanical Engineer position based onshore, Qatar.<br>For further information about this position please apply.<br> <br> <br>Key Job Accountabilities <br>Provide all aspects of Mechanical Engineering support (in the general areas of piping, pressure vessels, heat exchangers and packaged equipment) to contribute to the division strategy and goals which includes design reviews, commissioning, start-up, failure analysis, advanced troubleshooting and develop work packs to maintenance executed modifications. <br>Define and document best practices within the area of expertise and recommends performance improvement initiatives. <br>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives. Identify plant problems concerning static equipment and piping, and shall cover degradation/ failure and equipment malfunction. <br>Control and supervise the activities undertaken by contractors, consultants and service providers. <br>Guide less experienced engineers in implementing the company integrity and reliability systems. <br>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility. <br>Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability and Availability. <br>Provide Management of Change related technical support to assigned Assets (Operations) and identifying timely solutions to ensure Asset Integrity and Reliability sustaining safe and continuous plant environment. <br>Active participation in Safety Workshops, Cold Eye Reviews and Value Improvement Workshops. Steward and participate in Root Cause Failure Analysis (RCFA), scenario based risk assessments (SBRAs), risk screening and Formal Risk Assessment (FRA). <br> <br>Qualifications <br>Bachelor’s Degree in Engineering. <br><br> Knowledge and/or Experience <br>6 years' experience in an oil and gas environment. <br>Attained Senior Engineer level of competencies as per Mechanical Technical Competencies. <br>Knowledge in performing design calculation / verifications with software such as PV Elite, CAESAR II, Nozzle Pro. <br> <br>Technical and Business Skills <br>Behavioural Competencies <br>Ability to use good engineering sense combined with understanding of pressure vessel repair /alterations in compliance with NBIC. <br>Able to work and make decisions under highly stressing conditions. <br>Fluent in written and spoken English. <br>Computer literacy involving the regular use of professional office and technical applications. <br><br>People are our business worldwide<br> <br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

We are currently hiring for a Senior Mechanical Engineer position based onshore, Qatar.<br>For further information about this position please apply.<br> <br> <br>Key Job Accountabilities <br>Provide all aspects of Mechanical Engineering support (in the general areas of piping, pressure vessels, heat exchangers and packaged equipment) to contribute to the division strategy and goals which includes design reviews, commissioning, start-up, failure analysis, advanced troubleshooting and develop work packs to maintenance executed modifications. <br>Define and document best practices within the area of expertise and recommends performance improvement initiatives. <br>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives. Identify plant problems concerning static equipment and piping, and shall cover degradation/ failure and equipment malfunction. <br>Control and supervise the activities undertaken by contractors, consultants and service providers. <br>Guide less experienced engineers in implementing the company integrity and reliability systems. <br>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility. <br>Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability and Availability. <br>Provide Management of Change related technical support to assigned Assets (Operations) and identifying timely solutions to ensure Asset Integrity and Reliability sustaining safe and continuous plant environment. <br>Active participation in Safety Workshops, Cold Eye Reviews and Value Improvement Workshops. Steward and participate in Root Cause Failure Analysis (RCFA), scenario based risk assessments (SBRAs), risk screening and Formal Risk Assessment (FRA). <br> <br>Qualifications <br>Bachelor’s Degree in Engineering. <br><br> Knowledge and/or Experience <br>6 years' experience in an oil and gas environment. <br>Attained Senior Engineer level of competencies as per Mechanical Technical Competencies. <br>Knowledge in performing design calculation / verifications with software such as PV Elite, CAESAR II, Nozzle Pro. <br> <br>Technical and Business Skills <br>Behavioural Competencies <br>Ability to use good engineering sense combined with understanding of pressure vessel repair /alterations in compliance with NBIC. <br>Able to work and make decisions under highly stressing conditions. <br>Fluent in written and spoken English. <br>Computer literacy involving the regular use of professional office and technical applications. <br><br>People are our business worldwide<br> <br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Be fully aware of the Project HSE requirements</p><p>Supports the Lead Electrical Engineer, assists and ensure the liaison with the other Project Team members as applicable</p><p>Ensure that all activities and works in the area of responsibility are done in full compliance with the HSE requirements of Company and the relevant Authorities</p><p>Ensure implementation of the Company Contract requirements in area of responsibility and report any deviation to the Project Manager through the line responsible</p><p>Actively contribute to safety walks, reporting of accidents and investigation of accidents</p><p>Ensure that the works are being done in accordance with the Quality requirements of the Project</p><p>Follow up EPCC Contractor and Subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work</p><p>Follow up EPCC Contractor/Subcontractors with regard to interpretation and proper implementation of the technical content of the EPCC Contract documents</p><p>Follow up and report on the progress including detection of deviation from the schedule</p><p>Verify status of Mechanical Completion activities and EPCC Contractor's achievement of milestones</p><p>Assist Lead Engineer in coordination of the discipline scope and activity towards Company</p><p>Ensure that EPCC Contractor schedule is commissioning driven and follow up schedule and progress including detection of deviation from the EPCC Contract schedule,</p><p>Follow up and monitor all relevant critical path activities throughout the Project execution,</p><p>Verify status of Mechanical Completion activities,</p><p>Verify EPCC Contractor's achievement of milestones in accordance with the requirements of EPCC Contract,</p><p>Assists the Commissioning team in Punch items categorization, tracking and resolution for systems mechanical completion,</p><p>Verify and close punch items in area of responsibility</p><p>Coordinate identification, compilation and implementation of all lessons learned,</p><p>Support Lead Electrical Engineer in coordinating the training of the Company team to enable them to undertake the commissioning, start up and installation, of the plant within discipline scope,</p><p>Ensure that all implemented Project process technologies and its operation aspects are proven,</p><p>Participate and support in verifying the Performance Test of the Project when performed under the responsibility and supervision of EPCC Contractor and confirm full compliance with the requirements set forth in EPCC Contract,</p><p>Ensure all tie-ins within discipline scope required from the company are completed and ready for Hook-up/installation in accordance with schedule/quality</p><p>Identify, report and follow up risks within own area of responsibility</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in relevant discipline from a recognized University</p><p>7+ years direct and relevant discipline experience in large EPCC Projects related to oil/gas or petrochemical or fertilizer industry. Experience in Ammonia and Urea Fertilizer Projects/Plants is an advantage.</p><p></p></section>

Primary Purpose Of The Job<br><br>Manage independent Cost estimation and Cost advice for developing and implementing various Capital, Production, Maintenance, HSE and Refinery Shutdown Projects. Execute cost estimate for in-house Plant modification for optimizing and improving Refinery processes, production and HSE requirements.<br><br>Required Experience And Skills<br><br>Minimum 12 years oil and gas experience in cost estimation, contractor interface, planning and costing. Excellent oral and written English, communication combined with good presentation skills. Experience in MS Office applications and leadership and motivation ability and Problem-solving skills.<br><br>Educational Qualifications<br><br>Civil/Mechanical/process Degree holder from internationally recognized university. Certified Project Management Professional (PMP) and / or Certified Cost Professional (CCP) certified cost engineer (AACE) will assets.

Primary Purpose Of The Job<br><br>Manage independent Cost estimation and Cost advice for developing and implementing various Capital, Production, Maintenance, HSE and Refinery Shutdown Projects. Execute cost estimate for in-house Plant modification for optimizing and improving Refinery processes, production and HSE requirements.<br><br>Required Experience And Skills<br><br>Minimum 12 years oil and gas experience in cost estimation, contractor interface, planning and costing. Excellent oral and written English, communication combined with good presentation skills. Experience in MS Office applications and leadership and motivation ability and Problem-solving skills.<br><br>Educational Qualifications<br><br>Civil/Mechanical/process Degree holder from internationally recognized university. Certified Project Management Professional (PMP) and / or Certified Cost Professional (CCP) certified cost engineer (AACE) will assets.

Primary Purpose Of The Job<br><br>Manage independent Cost estimation and Cost advice for developing and implementing various Capital, Production, Maintenance, HSE and Refinery Shutdown Projects. Execute cost estimate for in-house Plant modification for optimizing and improving Refinery processes, production and HSE requirements.<br><br>Required Experience And Skills<br><br>Minimum 12 years oil and gas experience in cost estimation, contractor interface, planning and costing. Excellent oral and written English, communication combined with good presentation skills. Experience in MS Office applications and leadership and motivation ability and Problem-solving skills.<br><br>Educational Qualifications<br><br>Civil/Mechanical/process Degree holder from internationally recognized university. Certified Project Management Professional (PMP) and / or Certified Cost Professional (CCP) certified cost engineer (AACE) will assets.

Job Title: Senior Mechanical Engineer (HVAC – Design) - UPDA certified Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design and development of HVAC (air conditioning and ventilation) systems for construction projects, ensuring efficient, compliant, and high-quality mechanical design solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. HVAC Design & Engineering<br> Lead HVAC system design including cooling load calculations, duct sizing, equipment selection, and system layouts.<br> Develop design concepts and detailed mechanical drawings for air conditioning and ventilation systems.<br> Ensure energy-efficient and cost-effective design solutions.<br> B. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of HVAC systems within overall building design.<br> Resolve design clashes and technical issues.<br> C. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), ASHRAE standards, and local authority regulations.<br> Prepare and review design submissions for approvals.<br> D. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Conduct design reviews and value engineering exercises.<br> E. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure proper installation and compliance with design.<br> Assist in testing & commissioning of HVAC systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification mandatory<br> 10–12 years of experience in HVAC design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in HVAC design (chilled water systems, VRF, ventilation systems, etc.)<br> Proficiency in software: HAP, Auto CAD, Revit, BIM tools<br> Strong knowledge of ASHRAE standards and local codes

Job Title: Senior Mechanical Engineer (HVAC – Design) - UPDA certified Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design and development of HVAC (air conditioning and ventilation) systems for construction projects, ensuring efficient, compliant, and high-quality mechanical design solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. HVAC Design & Engineering<br> Lead HVAC system design including cooling load calculations, duct sizing, equipment selection, and system layouts.<br> Develop design concepts and detailed mechanical drawings for air conditioning and ventilation systems.<br> Ensure energy-efficient and cost-effective design solutions.<br> B. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of HVAC systems within overall building design.<br> Resolve design clashes and technical issues.<br> C. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), ASHRAE standards, and local authority regulations.<br> Prepare and review design submissions for approvals.<br> D. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Conduct design reviews and value engineering exercises.<br> E. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure proper installation and compliance with design.<br> Assist in testing & commissioning of HVAC systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification mandatory<br> 10–12 years of experience in HVAC design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in HVAC design (chilled water systems, VRF, ventilation systems, etc.)<br> Proficiency in software: HAP, Auto CAD, Revit, BIM tools<br> Strong knowledge of ASHRAE standards and local codes

The Maintenance Engineer is responsible for proper functioning of all heating, ventilation, and air conditioning (HVAC) equipment in the yard and all structures, services in the main people buildings. The Maintenance Engineer leverages deep understanding of maintenance strategies in-order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of Maintenance in monitoring and implementing the strategies for managing the shipyards assets throughout their lifecycle. All works is executed to a high quality & auditable standard that is consistent with the companies integrated management systems and policies. As an officer, a high level of trade skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.<br>Key Accountabilities:1) Develop a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking down the strategy into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy.2) Operate and maintain HVAC equipment, including but not limited to dehumidifiers, chillers, AHUs, pumps, fan coil units, Variable Refrigerant Volume (VRV) units, Air Cooled Condensing Unit (ACCU) units, window air-conditioning units, split air-conditioning units and ventilation systems and all its components.3) Operate and maintain Low Voltage (LV) Power & Lighting system, Elevator, sliding door, Dock leveler, Building Maintenance Unit (BMU), Electrical Low Voltage (ELV) systems consisting of Access Control System, Barrier gate, Intercom and all its components.4) Operate and maintain other building systems and Plumbing equipment’s consist of potable water booster pumps, circulation pumps, water heaters and all its components.5) Prepare and manage all spare parts required for the maintenance of the Equipment and related assets.6) Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.7) Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.8) Prepare Scope Of Work (SOW), Scope Of Service (SOS) and Tender documentation for sub-contractors works.9) Supervise sub-contractors and ensure compliance with scope of work.10) Lead and supervise maintenance technicians.11) Prepare fit for purpose Work Permits and Risk Assessment for the identification, control and/or mitigation of workplace risk.12) Maintain maintenance records.13) Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.14) Communicate upwards – training needs, process improvement suggestions and follow up on implementation. Qualifications:• Engineering Degree in Mechanical or HVAC. Experience:• 5 years of relevant experience as a Mechanical Maintenance Engineer, HVAC Maintenance Engineer or equivalent. Job Specific Competencies:Technical Competencies• O&M Skill of HVAC, LV, Plumbing, and ELV Systems.• Read and comprehend HVAC drawings and schematics, including control diagrams.• Understand HVAC systems and components.• Capable of reviewing HVAC calculations and other technical data from contractors.• Capable of examining existing HVAC system to determine condition of systems and identify areas for improvement.• Knowledge of all Building structures and services.• Perform shipyard maintenance operations.• Carry out facility management.• Perform Mechanical and Electrical design and modification job.

The Maintenance Engineer is responsible for proper functioning of all heating, ventilation, and air conditioning (HVAC) equipment in the yard and all structures, services in the main people buildings. The Maintenance Engineer leverages deep understanding of maintenance strategies in-order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of Maintenance in monitoring and implementing the strategies for managing the shipyards assets throughout their lifecycle. All works is executed to a high quality & auditable standard that is consistent with the companies integrated management systems and policies. As an officer, a high level of trade skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.<br>Key Accountabilities:1) Develop a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking down the strategy into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy.2) Operate and maintain HVAC equipment, including but not limited to dehumidifiers, chillers, AHUs, pumps, fan coil units, Variable Refrigerant Volume (VRV) units, Air Cooled Condensing Unit (ACCU) units, window air-conditioning units, split air-conditioning units and ventilation systems and all its components.3) Operate and maintain Low Voltage (LV) Power & Lighting system, Elevator, sliding door, Dock leveler, Building Maintenance Unit (BMU), Electrical Low Voltage (ELV) systems consisting of Access Control System, Barrier gate, Intercom and all its components.4) Operate and maintain other building systems and Plumbing equipment’s consist of potable water booster pumps, circulation pumps, water heaters and all its components.5) Prepare and manage all spare parts required for the maintenance of the Equipment and related assets.6) Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.7) Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.8) Prepare Scope Of Work (SOW), Scope Of Service (SOS) and Tender documentation for sub-contractors works.9) Supervise sub-contractors and ensure compliance with scope of work.10) Lead and supervise maintenance technicians.11) Prepare fit for purpose Work Permits and Risk Assessment for the identification, control and/or mitigation of workplace risk.12) Maintain maintenance records.13) Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.14) Communicate upwards – training needs, process improvement suggestions and follow up on implementation. Qualifications:• Engineering Degree in Mechanical or HVAC. Experience:• 5 years of relevant experience as a Mechanical Maintenance Engineer, HVAC Maintenance Engineer or equivalent. Job Specific Competencies:Technical Competencies• O&M Skill of HVAC, LV, Plumbing, and ELV Systems.• Read and comprehend HVAC drawings and schematics, including control diagrams.• Understand HVAC systems and components.• Capable of reviewing HVAC calculations and other technical data from contractors.• Capable of examining existing HVAC system to determine condition of systems and identify areas for improvement.• Knowledge of all Building structures and services.• Perform shipyard maintenance operations.• Carry out facility management.• Perform Mechanical and Electrical design and modification job.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>Mechanical Technician</p><p><b>Knowledge &amp; Qualification:</b></p><p>Mechanical Technician</p><p><b>Role &amp; Responsibilities:</b></p><p><br></p><p>*Assisting the mechanical engineer with mechanical design and maintenance tasks&nbsp;</p><p>*Installing and performing diagnostic tests on mechanical systems&nbsp;</p><p>*Developing and implementing mechanical maintenance plans to prevent costly equipment breakdowns *Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs&nbsp;</p><p>*Documenting processes and maintaining mechanical service records&nbsp;</p><p>*Monitoring the availability of parts and replenishing supplies&nbsp;</p><p>*Optimizing mechanical efficiency by adjusting machinery and equipment settings&nbsp;</p><p>*Training co-workers on the safe and efficient use of mechanical machinery and equipment&nbsp;</p><p>*Maintaining a tidy work environment and adhering to industry regulations</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Mechanical Technician</p><p>KnowledgeAndQualifiction:Mechanical Technician</p><p></p></section>

<section><p class="heading jdMain">وصف الوظيفة</p><p class="heading">الأدوار والمسؤوليات</p><div class="paragraph"><p>ملخص الوظيفة نحن نسعى لتوظيف مهندس ماهر لدعم تقديم أداء أنظمة البنية التحتية الكبرى. يتضمن الدور تقديم الدعم الفني، ومراقبة الأداء التشغيلي، وتنسيق الأنشطة الهندسية وضمان تقديم الخدمة بكفاءة عبر مشاريع معقدة.</p><p>المسؤوليات الرئيسية</p><ul><li>مراقبة الأداء التشغيلي وتحديد فرص التحسين.</li><li>تقديم الدعم الفني للفرق الداخلية وأصحاب المصلحة في المشروع.</li><li>تحليل بيانات الهندسة وإعداد تقارير الأداء.</li><li>التنسيق مع فرق العمليات والصيانة والهندسة.</li><li>حل المشكلات الفنية ودعم مبادرات التحسين المستمر.</li><li>الحفاظ على سجلات فنية دقيقة ووثائق المشروع.</li><li>ضمان الامتثال لمعايير الهندسة وسياسات الصحة والسلامة والبيئة.</li></ul></div></section><section><p class="heading">الملف المرشح المطلوب</p><p class="paragraph"></p><ul><li>درجة البكالوريوس في الهندسة الميكانيكية أو المدنية أو تخصص هندسي ذي صلة.</li><li>خبرة لا تقل عن 8-10 سنوات في البنية التحتية أو عمليات الهندسة.</li><li>مهارات تحليلية قوية وإعداد تقارير وحل مشكلات تقنية.</li><li>قدرات تواصل وتنسيق ممتازة.</li></ul><p></p></section>