Artificial Intelligence Engineer Jobs in Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>The Facilities Engineer will support the operation and maintenance of <strong>electromechanical building systems</strong>, ensuring maintenance activities are delivered effectively, safely, and in accordance with required technical standards.</p><br><br>Key Responsibilities<ul><li>Coordinate preventive, corrective, and reactive maintenance activities.</li><li>Monitor electrical, mechanical, ELV, HVAC, and associated electromechanical systems.</li><li>Conduct technical inspections and identify maintenance requirements.</li><li>Troubleshoot technical faults and recommend corrective solutions.</li><li>Coordinate supervisors, technicians, and specialist contractors.</li><li>Monitor system performance and reliability.</li><li>Ensure compliance with QHSE and applicable technical standards.</li><li>Prepare technical reports and maintenance recommendations.</li><li>Support planning and supervision of technical teams.</li></ul>Requirements<ul><li>Bachelor's degree in <strong>Mechanical or Electrical Engineering</strong>, or equivalent.</li><li>Minimum <strong>3 years' Facility Management experience</strong>.</li><li>Experience with similar-sized projects within the GCC.</li><li>Strong knowledge of electrical, mechanical, and ELV systems.</li><li>Good knowledge of standards applicable within Qatar.</li><li>Good understanding of Quality Management and QHSE requirements.</li><li><strong>Fluent in Arabic and English, spoken and written.</strong></li><li>QCDD certification preferred.</li><li>Grade B classification by Kahramaa / competent authority preferred.</li></ul> <br><br> </div>

Mechanical Design Engineer<br>JOB SUMMARYWe are looking for an experienced Mechanical Design Engineer with a minimum of 5 years of relevant engineering experience in STP, wastewater treatment, sewage treatment plants, pumping stations, plumbing systems, RO systems, piping systems, and mechanical equipment design. The successful candidate will be responsible for mechanical engineering design, hydraulic calculations, equipment selection, piping design, P&IDs, PFDs, General Arrangement drawings, isometric drawings, technical specifications, equipment datasheets, technical reports, material submittals, shop drawing reviews, contractor technical submissions, and multidisciplinary project coordination.<br>KEY RESPONSIBILITIES• Lead mechanical engineering design activities for STP, wastewater treatment, sewage treatment, plumbing, RO, pumping station, and industrial projects.• Prepare preliminary and detailed mechanical engineering designs and design concepts.• Perform hydraulic calculations for pumping stations, piping systems, pumps, mechanical equipment, and related systems.• Select, size, and specify pumps, valves, piping, mechanical equipment, and associated systems.• Prepare mechanical equipment datasheets, technical specifications, equipment schedules, and material schedules.• Prepare General Arrangement drawings, piping layouts, piping isometric drawings, P&IDs, PFDs, equipment layouts, and mechanical engineering drawings.• Prepare design calculations, technical reports, design reports, specifications, optioneering reports, and engineering documentation.• Review mechanical design drawings, calculations, specifications, equipment datasheets, and technical documents.• Review technical material submittals, shop drawings, equipment submissions, contractor technical submissions, and supplier proposals.• Technically evaluate contractor and supplier submissions and identify technical deviations from project requirements.• Coordinate mechanical requirements with electrical, civil, structural, process, instrumentation, architectural, and other disciplines.• Coordinate with consultants, contractors, subcontractors, suppliers, clients, and internal project teams.• Review equipment space requirements, access requirements, maintenance clearances, installation requirements, piping routes, and mechanical interfaces.• Attend technical coordination meetings and support multidisciplinary design coordination.• Support construction, installation, testing, commissioning, and project handover activities.• Ensure engineering deliverables comply with project specifications, Qatar requirements, applicable codes, international standards, and contractual requirements.• Manage assigned engineering deliverables and ensure completion within project schedule, cost, quality, and technical requirements.• Work independently with minimum supervision and provide sound engineering judgment.• Identify technical issues and develop practical and cost-effective engineering solutions.• Support design optimization, value engineering, and engineering process improvement.• Provide technical guidance and mentoring to junior engineers and project team members.• Prepare technical presentations and communicate engineering solutions clearly to clients, consultants, contractors, suppliers, and internal teams.<br>REQUIRED EXPERIENCE• Minimum 5 years of relevant professional engineering experience.• Bachelor's degree in Mechanical Engineering or a related engineering discipline.• Strong experience in STP and wastewater treatment projects.• Strong experience in sewage and wastewater pumping stations.• Experience in plumbing systems and RO systems.• Experience in mechanical design and piping engineering.• Strong experience in hydraulic calculations.• Experience in pump selection, pump sizing, and mechanical equipment selection.• Experience preparing P&IDs and PFDs.• Experience preparing General Arrangement drawings and piping isometric drawings.• Experience preparing equipment datasheets, technical specifications, and equipment schedules.• Experience reviewing shop drawings and technical material submittals.• Experience reviewing contractor technical submissions and equipment proposals.• Experience coordinating mechanical systems with electrical and other engineering disciplines.• Experience working with consultants, contractors, suppliers, and clients.<br>TECHNICAL SKILLSMechanical Engineering Mechanical Design MEPSTPWastewater Treatment Sewage Treatment Plants Pumping Stations Plumbing RO Systems Piping Design Hydraulic Calculations Pump Selection Pump Sizing Mechanical Equipment Selection P&IDPFDGeneral Arrangement Drawings Piping Isometric Drawings Equipment Datasheets Technical Specifications Shop Drawings Material Submittals Contractor Technical Submissions Design Calculations Engineering Calculations Technical Reports Engineering Coordination<br>REQUIREMENTS• MMUP/UPDA/MME engineering registration is required.• Qatar project experience is highly preferred.• Knowledge of Qatar Construction Specifications and relevant Qatar authority requirements is preferred.<br>MANDATORY REQUIREMENTS• 5+ years of relevant engineering experience.• Bachelor's degree in Mechanical Engineering.• STP or wastewater treatment experience.• Pumping station experience.• Hydraulic calculation experience.• P&ID and PFD experience.• Pump selection and mechanical equipment selection experience.• Piping design experience.• Auto CAD experience.• Microsoft Project experience.• Valid Qatar MMUP/UPDA/MME engineering registration.

Company Description Gharnata Consultant Engineers is an established architecture , MEP and planning firm based in Doha, Qatar, providing professional consulting services for a range of building and infrastructure projects. The company focuses on delivering well-designed, efficient, and sustainable solutions that align with local regulations and client needs. Team members work in a multidisciplinary environment, collaborating closely with architects, engineers, and planners. Gharnata Consultant Engineers offers opportunities to contribute to impactful projects shaping the built environment in Qatar and the wider region. Role Description The Senior Mechanical Designer Engineer is a full-time, on-site role based in Doha, Qatar. This role involves leading mechanical design activities for building and infrastructure projects, including HVAC, plumbing, and fire protection systems, from concept through detailed design. The engineer will prepare and review drawings, specifications, and calculations, coordinate with electrical , architectural and structural teams, and ensure designs comply with local codes, standards, and client requirements. Daily responsibilities include overseeing design reviews, guiding junior engineers and draftspeople, resolving technical issues, and supporting value engineering and design optimization. The role also requires participation in client and contractor meetings, responding to technical queries, and providing support during construction and commissioning phases. Qualifications Strong mechanical engineering background, with demonstrated experience in building services design (HVAC, plumbing, fire protection). Proficiency in relevant design and drafting software (e.g., Auto CAD, Revit, mechanical calculation tools) and familiarity with international and local building codes and standards. Experience leading projects, coordinating multidisciplinary teams, and reviewing mechanical drawings and specifications for quality and accuracy. Ability to mentor junior team members, manage multiple deadlines, and solve complex technical problems in a fast-paced consulting environment. Bachelor’s degree in Mechanical Engineering or a closely related discipline; professional registration or certification is an advantage. Previous experience in an architecture or engineering consultancy, preferably in Qatar or the Gulf region, and strong written and verbal communication skills in English. Ability to work on-site in Doha, Qatar, and collaborate effectively with clients, contractors, and internal stakeholders. Grade A , UPDA is must

Company Description Gharnata Consultant Engineers is an established architecture , MEP and planning firm based in Doha, Qatar, providing professional consulting services for a range of building and infrastructure projects. The company focuses on delivering well-designed, efficient, and sustainable solutions that align with local regulations and client needs. Team members work in a multidisciplinary environment, collaborating closely with architects, engineers, and planners. Gharnata Consultant Engineers offers opportunities to contribute to impactful projects shaping the built environment in Qatar and the wider region. Role Description The Senior Mechanical Designer Engineer is a full-time, on-site role based in Doha, Qatar. This role involves leading mechanical design activities for building and infrastructure projects, including HVAC, plumbing, and fire protection systems, from concept through detailed design. The engineer will prepare and review drawings, specifications, and calculations, coordinate with electrical , architectural and structural teams, and ensure designs comply with local codes, standards, and client requirements. Daily responsibilities include overseeing design reviews, guiding junior engineers and draftspeople, resolving technical issues, and supporting value engineering and design optimization. The role also requires participation in client and contractor meetings, responding to technical queries, and providing support during construction and commissioning phases. Qualifications Strong mechanical engineering background, with demonstrated experience in building services design (HVAC, plumbing, fire protection). Proficiency in relevant design and drafting software (e.g., Auto CAD, Revit, mechanical calculation tools) and familiarity with international and local building codes and standards. Experience leading projects, coordinating multidisciplinary teams, and reviewing mechanical drawings and specifications for quality and accuracy. Ability to mentor junior team members, manage multiple deadlines, and solve complex technical problems in a fast-paced consulting environment. Bachelor’s degree in Mechanical Engineering or a closely related discipline; professional registration or certification is an advantage. Previous experience in an architecture or engineering consultancy, preferably in Qatar or the Gulf region, and strong written and verbal communication skills in English. Ability to work on-site in Doha, Qatar, and collaborate effectively with clients, contractors, and internal stakeholders. Grade A , UPDA is must

<p>The primary responsibilities of the Security Infrastructure Engineer Sentinel:</p><p>Functional <b>Responsibilities</b>:</p><p>Data Ingestion and Normalization Pipeline Management: Architect and maintain the ingestion of telemetry from multi-cloud (GCP, AWS, Azure) and on-premises environments using Bind Plane Forwarders, Cloud-to-Cloud (C2C) connectors, and Webhooks.</p><p>Parser Development: Design, build, and troubleshoot custom parsers (CBN) to ensure non-standard log sources are correctly normalized into the Unified Data Model (UDM).</p><p>Data Health Monitoring: Build dashboards to monitor ingestion rates, latency, and data drops to ensure the SIEM is always receiving high-quality, actionable data.</p><p>SOAR &amp; Automation Engineering</p><p>Playbook Development: Design and code automated incident response playbooks in Sentinel SOAR using Python and visual builders.</p><p>Connector Engineering: Build and maintain API integrations between Sentinel SOAR and third-party tools (Firewalls, EDR, IAM, Ticketing systems).</p><p>Workflow Optimization: Automate repetitive manual tasks such as artifact enrichment, evidence gathering, and initial containment actions.</p><p>Case Management Configuration: Tailoring the SOAR environment to fit the SOC s operational needs, including custom fields, stages, and SLA tracking.</p><p>Platform Administration and Optimization</p><p>System Health Monitoring: Monitoring the ingestion health to ensure no data is dropped and that latency stays within acceptable limits.</p><p>Access Control: Managing Role-Based Access Control (RBAC) to ensure analysts have the correct level of access to sensitive data.</p><p>Threat Intel Ingestion: Managing the integration of Mandiant, Virus Total, and other third-party threat intelligence feeds to ensure detections are always up to date with the latest global threats.</p><p>Collaboration with SOC Team</p><p>Feedback Loops: Collaborating with Tier 1 and Tier 2 analysts to tune YARA-L rules based on real-world alert performance and noise levels.</p><p>Requirements Gathering: Interviewing incident responders to understand their manual workflows, then translating those into Sentinel SOAR playbooks.</p><p>Training &amp; Enablement: Conducting knowledge transfer sessions on how to use UDM Search and the MS Sentinel interface to speed up investigations.</p><p>Alignment with Infrastructure Team</p><p>Data Ingestion Strategy: Working with GCP/AWS/Azure Architects to ensure that Cloud Logging and Pub/Sub are configured correctly for seamless export to Google SecOps platform.</p><p>Agent Deployment: Coordinating with IT Infrastructure teams to deploy and maintain Bind Plane Forwarders on on-premises servers and virtual machines.</p><p>Troubleshooting: Collaborating with Network Engineers to resolve connectivity issues or firewall blocks that prevent telemetry from reaching the Google SecOps platform.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Academic &amp; Professional Qualifications:</strong></p><p>Bachelor s degree in computer science, IT, Cybersecurity, or equivalent.</p><p>SIEM Certification (Azure Sentinel).</p><p><strong>Preferred:</strong> Security certifications such as Security+, CySA+, CEH, CISSP, GCIH</p><p><strong>Sentinel Engineer Experience:</strong></p><p>3 5 years of hands-on experience in Security Engineering, SOC Automation, DevOps Engineer, Security Operations, or Infrastructure Security.</p><p><strong>Skills and Requirements:</strong></p><p>SIEM/SOAR Mastery: Proven experience architecting and managing enterprise-grade platforms (e.g., Splunk, Azure Sentinel, or QRadar), with at least 1 2 years specifically focused on Google SecOps (Chronicle).</p><p><strong>Key Requirement:</strong> Required skills: Google SecOps.</p><p>Coding &amp; Scripting: Professional experience using Python to automate security workflows or build custom API connectors.</p><p>Cloud Infrastructure: Hands-on experience managing security within Google Cloud Platform (GCP), including VPC service controls, IAM, and Cloud Logging.</p><p>Languages: Python (Advanced), SQL (BigQuery), YARA/YARA-L, and Bash.</p><p>Frameworks: MITRE ATT&amp;CK, NIST Cybersecurity Framework.</p><p>Tools: Git (Version Control), Terraform (Infrastructure as Code), Docker/Kubernetes (Containerization).</p><p>Data Standards: Deep knowledge of JSON, Protobuf, and Regex for log parsing and normalization.</p><p><strong>Soft Skills:</strong></p><p>Strong analytical thinking and problem-solving capability.</p><p>Excellent communication skills, able to explain technical findings to non-technical stakeholders.</p><p>Ability to work independently, manage multiple priorities, and meet deadlines.</p><p>Attention to detail and a structured, documentation-driven mindset.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>The Senior Commissioning Engineer - Telecommunications role involves leading and managing all pre-commissioning, commissioning, and start-up activities for telecom systems in oil and gas projects, particularly offshore environments.</li> <li>The position requires active participation across the full project lifecycle-from engineering and construction through to final handover-ensuring quality, safety, cost efficiency, and timely delivery.</li> </ul><br><ul> <li>Plan, coordinate, and execute commissioning activities.</li> <li>Ensure systems meet design, safety, and operational requirements.</li> <li>Oversee pre-commissioning, mechanical completion, commissioning &amp; handover.</li> <li>Lead engineers, technicians, and contractors.</li> <li>Act as interface between project team, contractors, and operations.</li> <li>Manage multicultural teams and offshore workforce.</li> <li>Review engineering designs, drawings, and procedures.</li> <li>Approve commissioning documents and certifications.</li> <li>Troubleshoot technical issues during commissioning.</li> </ul><br><ul> <li>Bachelor's degree in Electronics &amp; Communication (or similar).</li> <li>15+ years in Oil &amp; Gas industry.</li> <li>At least 10 years in telecom commissioning, including offshore projects.</li> <li>Strong experience in: FEED &amp; EPIC projects, Contractor deliverables review/approval.</li> <li>Preferably: Chartered Engineer status, Offshore certifications (BOSIET/FOET), Experience in Instrumentation &amp; Control would be advantageous.</li> <li>Extensive knowledge of telecom systems such as: CCTV, PA/GA systems, Radio systems (VHF/UHF/microwave), Structured cabling, Telephony (IP phones, hotlines), AIS, e-Mustering, telemetry, Network management systems</li> <li>Also requires: FAT/SAT testing experience, Strong knowledge of engineering standards, HSE, and QA/QC.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>9 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>1 year with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior MEP (Mechanical, Electrical, Plumbing) Project Manager supports the organization in providing leadership and technical expertise in the key areas of Mechanical, Electrical and Plumbing engineering. This position is responsible for a portfolio of construction projects as are assigned and must ensure quality in keeping with international best practices and national construction standards.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Develop comprehensive project plans, including scope, budget, schedule, and resource allocation, to ensure successful project execution.</p><br> <p>Lead multidisciplinary teams of engineers, technicians, and subcontractors, providing direction, guidance, and support throughout the project lifecycle.</p><br> <p>Liaise with clients, architects, consultants, and regulatory authorities to ensure alignment of project objectives, specifications, and compliance requirements.</p><br> <p>Oversee quality control processes, conducting inspections, audits, and tests to verify that MEP systems meet design standards, codes, and client expectations.</p><br> <p>Monitor project budgets, track expenses, and implement cost-control measures to minimize deviations and ensure profitability.</p><br> <p>Identify, assess, and mitigate project risks, developing contingency plans and proactive strategies to prevent delays, disputes, and cost overruns.</p><br> <p>Manage project schedules, monitor progress against milestones, and implement strategies to optimize productivity and meet deadlines.</p><br> <p>Facilitate clear and effective communication among project stakeholders, providing regular updates, resolving issues, and addressing concerns in a timely manner.</p><br> <p>Manage changes to project scope, specifications, and requirements, assessing impacts and negotiating adjustments with clients and stakeholders.</p><br> <p>Ensure accurate and thorough documentation of project activities, including reports, drawings, specifications, and correspondence, to support accountability and compliance throughout the project lifecycle.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Comprehensive knowledge of mechanical, electrical, and plumbing systems, including design standards and installation practices.</p><br> <p>Strong abilities in project planning, scheduling, budgeting, and resource management to oversee complex projects effectively.</p><br> <p>Proven leadership skills to manage teams and coordinate subcontractors, ensuring project milestones are met.</p><br> <p>In-depth understanding of industry regulations, codes, and standards to ensure compliance and quality control.</p><br> <p>Excellent communication skills for client and stakeholder interactions, along with strong problem-solving abilities to address project challenges efficiently.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Electrical power design L4<br>Electrical lighting design L4<br>Electrical ELV design L4<br>Voltage drop calculation L4<br>Electrical load diagrams / schedules and calculation L4<br>Build High-Performing Teams<br>Speed of Execution<br>Build Process and Systems<br>Provide Direction<br>Drive Cost Optimization<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Mechanical Engineering or Engineering<br>Profesional degree in PMP or MMUP Engineer Registration (UPDA)<br><br><br><br> </div>

<p>The primary responsibilities of the Security Infrastructure Engineer Google SecOps:</p><p>Functional Responsibilities:</p><ul><li><strong>Data Ingestion and Normalization Pipeline Management:</strong> Architect and maintain the ingestion of telemetry from multi-cloud (GCP, AWS, Azure) and on-premises environments using Bind Plane Forwarders, Cloud-to-Cloud (C2C) connectors, and Webhooks.</li><li><strong>Parser Development:</strong> Design, build, and troubleshoot custom parsers (CBN) to ensure non-standard log sources are correctly normalized into the Unified Data Model (UDM).</li><li><strong>Data Health Monitoring:</strong> Build dashboards to monitor ingestion rates, latency, and data drops to ensure the SIEM is always receiving high-quality, actionable data.</li><li><strong>SOAR &amp; Automation Engineering</strong></li><li><strong>Playbook Development:</strong> Design and code automated incident response playbooks in Google SOAR using Python and visual builders.</li><li><strong>Connector Engineering:</strong> Build and maintain API integrations between Google SOAR and third-party tools (Firewalls, EDR, IAM, Ticketing systems).</li><li><strong>Workflow Optimization:</strong> Automate repetitive manual tasks such as artifact enrichment, evidence gathering, and initial containment actions.</li><li><strong>Case Management Configuration:</strong> Tailoring the SOAR environment to fit the SOC s operational needs, including custom fields, stages, and SLA tracking.</li><li><strong>Platform Administration and Optimization</strong></li><li><strong>System Health Monitoring:</strong> Monitoring the ingestion health to ensure no data is dropped and that latency stays within acceptable limits.</li><li><strong>Access Control:</strong> Managing Role-Based Access Control (RBAC) to ensure analysts have the correct level of access to sensitive data.</li><li><strong>Threat Intel Ingestion:</strong> Managing the integration of Mandiant, Virus Total, and other third-party threat intelligence feeds to ensure detections are always up to date with the latest global threats.</li><li><strong>Collaboration with SOC Team</strong></li><li><strong>Feedback Loops:</strong> Collaborating with Tier 1 and Tier 2 analysts to tune YARA-L rules based on real-world alert performance and noise levels.</li><li><strong>Requirements Gathering:</strong> Interviewing incident responders to understand their manual workflows, then translating those into Google SOAR playbooks.</li><li><strong>Training &amp; Enablement:</strong> Conducting knowledge transfer sessions on how to use UDM Search and the Google SecOps interface to speed up investigations.</li><li><strong>Alignment with Infrastructure Team</strong></li><li><strong>Data Ingestion Strategy:</strong> Working with GCP/AWS/Azure Architects to ensure that Cloud Logging and Pub/Sub are configured correctly for seamless export to Google SecOps platform.</li><li><strong>Agent Deployment:</strong> Coordinating with IT Infrastructure teams to deploy and maintain Bind Plane Forwarders on on-premises servers and virtual machines.</li><li><strong>Troubleshooting:</strong> Collaborating with Network Engineers to resolve connectivity issues or firewall blocks that prevent telemetry from reaching the Google SecOps platform.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Knowledge, Skills &amp; Experience</h2><h3>Academic &amp; Professional Qualifications:</h3><ul><li>Bachelor s degree in computer science, IT, Cybersecurity, or equivalent.</li><li>SIEM Certification ( Google SecOps, Splunk, Azure Sentinel).</li><li>Preferred: Security certifications such as Security+, CySA+, CEH, CISSP, GCIH</li></ul><h3>Google SecOps Engineer Experience:</h3><ul><li>3 5 years of hands-on experience in Security Engineering, SOC Automation, DevOps Engineer, Security Operations, or Infrastructure Security.</li></ul><h3>Skills and Requirements:</h3><ul><li><strong>SIEM/SOAR Mastery:</strong> Proven experience architecting and managing enterprise-grade platforms (e.g., Splunk, Azure Sentinel, or QRadar), with at least 1 2 years specifically focused on Google SecOps (Chronicle). Key Requirement: Required skills: Google SecOps.</li><li><strong>Coding &amp; Scripting:</strong> Professional experience using Python to automate security workflows or build custom API connectors.</li><li><strong>Cloud Infrastructure:</strong> Hands-on experience managing security within Google Cloud Platform (GCP), including VPC service controls, IAM, and Cloud Logging.</li><li><strong>Languages:</strong> Python (Advanced), SQL (BigQuery), YARA/YARA-L, and Bash.</li><li><strong>Frameworks:</strong> MITRE ATT&amp;CK, NIST Cybersecurity Framework.</li><li><strong>Tools:</strong> Git (Version Control), Terraform (Infrastructure as Code), Docker/Kubernetes (Containerization).</li><li><strong>Data Standards:</strong> Deep knowledge of JSON, Protobuf, and Regex for log parsing and normalization.</li></ul><h3>Soft Skills</h3><ul><li>Strong analytical thinking and problem-solving capability.</li><li>Excellent communication skills, able to explain technical findings to non-technical stakeholders.</li><li>Ability to work independently, manage multiple priorities, and meet deadlines.</li><li>Attention to detail and a structured, documentation-driven mindset.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Mechanical Inspector is responsible for inspecting and monitoring mechanical systems installation including HVAC, chilled water systems, and associated equipment. The role ensures compliance with project requirements, supports system integration, and contributes to achieving successful testing, commissioning, and handover.</p><br>Your role<ul><li>Inspect HVAC systems, chilled water piping, ductwork, pumps, valves, and ventilation systems.</li><li>Verify installation against approved drawings, specifications, and method statements.</li><li>Review WIRs, MIRs, and RFIs and ensure inspection readiness before approvals.</li><li>Monitor mechanical equipment installation and ensure alignment with project requirements.</li><li>Coordinate with OEM vendors and contractors for system interfaces and installation accuracy.</li><li>Support commissioning, IST (Integrated Systems Testing), and startup readiness.</li><li>Identify and report quality issues, NCRs, and non-compliance items.</li><li>Maintain inspection logs, documentation, and photographic records.</li><li>Assist in snagging, punch list closure, and final mechanical handover.</li><li>Ensure compliance with safety and quality standards and escalate issues as needed.</li></ul>About you<ul><li>Bachelor’s degree in Mechanical Engineering.</li><li>Experience in mechanical inspection for construction or industrial projects.</li><li>Preferably experienced in data centres, HVAC-intensive, or mission-critical environments.</li><li>Strong understanding of HVAC systems and mechanical installations.</li><li>Familiar with inspection processes, QA/QC documentation, and commissioning procedures.</li><li>UPDA certification preferred.</li><li>Good coordination and problem-solving skills.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

SR. COMMISSIONING ENGINEER (INSTRUMENTATION)<br><br>Mandatory Qualification<br><br>B. Sc. in an Engineering Discipline with extensive experience in commissioning of oil and gas projects.<br><br>Experience<br><br>Minimum of twelve (12) years’ experience in design, construction, commissioning, and start-up of oil & gas processing plants and preferably offshore with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader.<br><br>Primary Duties And Responsibilities<br><br>Responsible for pre-commissioning, commissioning, and start-up of facilities in projects in accordance with company procedures and guidelines in place. To define, mobilize and manage an organization which will cover the preparation and the execution of commissioning. To manage the preparation of project specific pre-commissioning/commissioning procedures and reporting tools (including technical database when applicable, planning, punch list control). To manage the execution of commissioning to achieve maximum productivity, minimize cost and achieve smooth hand over. To supervise the reporting of commissioning execution to ensure that all technical, and contractual information is properly recorded, collected and available for inspection/reference as required by regulations and company procedures/policies. To supervise the schedule of commissioning in order to reach the planned end date. To co-ordinate with other project entities/existing facilities. To ensure the project commissioning and handover process is implemented in compliance with company procedures and guidelines. To promote HSE behaviour within the commissioning activities and verify that HSE procedures are implemented by commissioning team. Improve company commissioning procedures, initiate and contribute to the commissioning deliverables standardization, develop strategy to minimize offshore commissioning and minimize lost time due to interfaces. Develop commissioning strategy and provide input to the project execution plan and early stages of engineering. Responsible for the review and the approval of the various commissioning preparation tasks to be performed by the Contractor: work breakdown structure, priorities, resources, schedule, etc. Review and approve the commissioning management procedures (hand over, checklists, interfaces, punch list, internal organisation, and sign-off certificates). Review and approve the commissioning dossiers prepared by the Contractor (including database populating and operational test procedures writing). Coordinate activities of the company commissioning team (system engineers, discipline supervisors, planning/punch list controller, Asset Holder). Identify and address all interface issues with other project packages with respect to commissioning. Prepare overall commissioning plan and obtain approval for the same in consultation with Asset Holder. Responsible to check and endorse mechanical completion. Responsible for witnessing and monitoring the pre-commissioning activities performed by the Contractor. Countersign all pre-commissioning dossiers at Ready For Commissioning (RFC) status. Control all commissioning activities performed by the Contractor and its reporting. Check progress against planning and recommend any necessary corrective actions, close follow up on punch list with Contractor and Asset Holder. Coordinate with Contractor/Vendors to solve system/equipment performance problems. Review and approve the commissioning dossiers after completion of commissioning activities and sign the Ready for Start Up and hand over certificates. Participate and contribute to all safety design review and studies.<br><br>Interested candidates are encouraged to send their CV to mahirah.marisa@airswift.com<br><br>Referrals are welcome too—feel free to share this opportunity with qualified professionals in your network.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Planning Engineer -Mechanical PLANNING ENGINEER – MECHANICAL&nbsp; JOB PURPOSE <p>Supervise and lead the planning, scheduling, resource management, <strong>mechanical maintenance contract management, contractor supervision, and site execution</strong> of routine, preventive, corrective, turnaround, and major mechanical maintenance activities.</p><br> <p>The position shall provide strong coordination between Maintenance, Operations, Reliability, Engineering, Inspection, Procurement, Contracts, HSE, and mechanical maintenance contractors to ensure work is completed safely, efficiently, within approved <strong>schedule, budget, quality, and contractual requirements</strong>.</p><br> KEY TASKS AND RESPONSIBILITIES 1. Mechanical Maintenance Planning &amp; Scheduling <ul><li>Supervise the activities assigned to Senior Planners and cross-functional maintenance planning teams.</li><li>Lead preparation and planning of <strong>mechanical maintenance activities</strong> for rotating equipment, static equipment, piping, valves, pumps, compressors, turbines, heat exchangers, pressure vessels, tanks, mechanical packages, and associated plant equipment.</li><li>Develop detailed maintenance plans, job plans, work packs, schedules, manpower requirements, material requirements, tools, equipment, and contractor resource requirements.</li><li>Participate in planning and coordination of preventive, predictive, corrective, breakdown, routine, and major mechanical maintenance programs.</li><li>Ensure all required manpower, mechanical spare parts, materials, tools, equipment, lifting facilities, scaffolding, specialist services, and contractors are available before work execution.</li><li>Review maintenance backlog and prioritize mechanical maintenance activities based on equipment criticality, production requirements, safety, reliability, and plant operating conditions.</li><li>Coordinate with Operations, Mechanical Maintenance, Reliability, Inspection, Engineering, Procurement, Contracts, HSE, and other disciplines to ensure timely execution.</li><li>Ensure proper budget allocation and resource planning for critical mechanical equipment to support reliable and trouble-free plant operation.</li><li>Prepare technical documentation in accordance with applicable standards, codes, specifications, and CLIENT requirements.</li></ul> 2. Mechanical Maintenance Contracts &amp; Contractor Management <ul><li>Lead the planning and coordination of <strong>mechanical maintenance contracts</strong>, including long-term mechanical maintenance service contracts, manpower contracts, specialist mechanical services, equipment hire, and shutdown/turnaround maintenance contracts.</li><li>Prepare detailed <strong>Scope of Work (SOW), technical specifications, BOQ/MTO, manpower requirements, equipment requirements, work schedules, cost estimates, execution methodologies, and contractor deliverables</strong> for mechanical maintenance contracts.</li><li>Develop mechanical maintenance contracting strategies based on workload, equipment criticality, manpower requirements, maintenance history, and in-house versus outsourced execution.</li><li>Review annual requirements for mechanical manpower, specialist services, lifting equipment, machining services, scaffolding, inspection support, and other special equipment/services.</li><li>Prepare detailed tender documents and technical specifications for major and long-term mechanical maintenance contracts.</li><li>Participate in contractor prequalification, technical clarification meetings, site visits, tender meetings, and contractor selection processes.</li><li>Perform technical evaluation of contractor bids, including:<ul><li>Contractor experience in mechanical maintenance.</li><li>Manpower and supervision structure.</li><li>Mechanical maintenance methodology.</li><li>Equipment, tools, lifting facilities, and workshop capabilities.</li><li>Proposed execution schedule and resource loading.</li><li>HSE and quality arrangements.</li><li>Technical compliance with CLIENT requirements.</li><li>Productivity and performance commitments.</li></ul></li><li>Support Contracts and Procurement departments during tendering, clarification, negotiation, award, renewal, and closeout of mechanical maintenance contracts.</li><li>Review contractor mobilization plans and verify availability of manpower, supervisors, tools, equipment, materials, lifting resources, permits, documentation, and site facilities.</li><li>Coordinate daily and weekly mechanical maintenance activities with contractors and ensure alignment with approved maintenance priorities.</li><li>Monitor contractor performance against <strong>scope, schedule, manpower, productivity, quality, HSE, KPIs, SLAs, and contractual deliverables</strong>.</li><li>Monitor contractor manpower utilization, productivity, equipment utilization, work-front availability, and progress at site.</li><li>Conduct regular contractor progress and performance meetings and ensure corrective actions are implemented.</li><li>Review contractor work orders, timesheets, progress reports, completed quantities, manpower records, and supporting documents.</li><li>Provide technical and planning input for contractor progress measurement and payment certification.</li><li>Identify contractor delays, manpower shortages, productivity issues, material constraints, equipment shortages, and schedule risks.</li><li>Develop and monitor contractor recovery plans for delayed or critical mechanical maintenance activities.</li><li>Participate in technical assessment of contractor <strong>variations, additional works, claims, and extension-of-time requests</strong>, including cost and schedule impact.</li><li>Maintain contractor performance records, productivity data, lessons learned, and historical information for future mechanical maintenance contract tendering.</li><li>Participate in contractor performance evaluations and recommend corrective or improvement actions.</li><li>Support contract closeout, including outstanding works, punch-list clearance, final quantities, documentation, lessons learned, and demobilization.</li></ul> 3. Site-Based Mechanical Maintenance Experience <ul><li>Maintain regular and frequent <strong>site presence</strong> to monitor mechanical maintenance execution, contractor performance, manpower deployment, work progress, and resource availability.</li><li>Provide direct site coordination and supervision of mechanical contractors, subcontractors, technicians, and maintenance personnel.</li><li>Conduct site walkdowns before commencement of mechanical maintenance activities to verify actual site conditions and work requirements.</li><li>Verify work scopes against equipment condition, drawings, specifications, job plans, inspection findings, and site requirements.</li><li>Ensure work-front readiness, including availability of materials, mechanical spares, tools, lifting equipment, scaffolding, access, isolation, permits, manpower, and specialist services.</li><li>Monitor field execution against approved mechanical maintenance schedules and identify constraints affecting completion.</li><li>Coordinate with mechanical supervisors and contractors to resolve daily site execution issues.</li><li>Monitor contractor compliance with approved Method Statements, JSA, Risk Assessments, Permit-to-Work requirements, quality procedures, and HSE requirements.</li><li>Verify actual site progress against contractor-reported progress and ensure accurate progress measurement.</li><li>Participate in inspections and verification of mechanical maintenance activities such as:<ul><li>Pumps and compressors maintenance.</li><li>Valve overhaul and replacement.</li><li>Heat exchanger maintenance.</li><li>Static equipment maintenance.</li><li>Piping repairs and modifications.</li><li>Rotating equipment alignment.</li><li>Mechanical seal replacement.</li><li>Bearing replacement.</li><li>Coupling and shaft-related maintenance.</li><li>Equipment installation and removal.</li><li>Pressure testing and reinstatement.</li><li>Mechanical completion and punch-list activities.</li></ul></li><li>Coordinate lifting, rigging, scaffolding, equipment access, and other mechanical work-front requirements with relevant site teams.</li><li>Verify completed work and ensure maintenance activities meet technical, quality, safety, and CLIENT requirements.</li><li>Participate in mechanical equipment testing, commissioning support, reinstatement, and handover activities where applicable.</li><li>Provide site feedback to update maintenance plans, schedules, manpower requirements, and recovery plans.</li><li>Coordinate multiple mechanical contractors and subcontractors working simultaneously within the plant.</li><li>Support troubleshooting of mechanical equipment problems with Maintenance, Reliability, Engineering, OEMs, and contractors.</li></ul> 4. Shutdown &amp; Turnaround Mechanical Planning <ul><li>Lead and oversee planning of <strong>mechanical shutdown and turnaround activities</strong>.</li><li>Develop detailed mechanical shutdown work lists, job packages, resource-loaded schedules, and critical paths.</li><li>Review estimates for mechanical labour, materials, spare parts, tools, lifting equipment, scaffolding, specialist services, and contractors.</li><li>Coordinate shutdown preparations with Supply Chain, Contracts, Procurement, Inspection, HSE, Operations, Production, Reliability, and Mechanical Maintenance.</li><li>Develop contractor manpower and equipment mobilization plans for shutdown and turnaround activities.</li><li>Lead activities during turnarounds, including <strong>site supervision, contractor coordination, manpower follow-up, work-front management, progress monitoring, and schedule control</strong>.</li><li>Monitor mechanical contractor progress against the approved shutdown critical path.</li><li>Identify delays and constraints and coordinate recovery actions.</li><li>Participate in daily shutdown meetings and provide accurate progress, manpower, productivity, and schedule information.</li><li>Support shutdown closeout, punch-list clearance, mechanical completion, documentation, lessons learned, and contractor demobilization.</li></ul> 5. Mechanical Maintenance Budget &amp; Cost Control <ul><li>Review annual manpower and special equipment requirements for mechanical maintenance.</li><li>Analyze manpower utilization, contractor productivity, material consumption, equipment utilization, and maintenance cost data.</li><li>Prepare cost estimates for mechanical maintenance activities, shutdowns, turnarounds, manpower contracts, equipment hire, and specialist services.</li><li>Support preparation and monitoring of the annual mechanical maintenance budget.</li><li>Monitor planned versus actual maintenance expenditure and contractor costs.</li><li>Identify cost-saving opportunities while maintaining equipment reliability, safety, quality, and integrity.</li><li>Raise necessary documentation to initiate contract negotiations for ongoing mechanical manpower, equipment hire, and specialist maintenance services.</li></ul> 6. Mechanical Equipment &amp; Spare Parts Planning <ul><li>Prepare proper plans for critical mechanical spare parts to ensure availability when required.</li><li>Review equipment criticality and maintenance history to identify critical mechanical spares.</li><li>Coordinate with Supply Chain and Procurement for timely procurement of mechanical spare parts.</li><li>Perform technical evaluations of material and spare-parts quotations for stock and special items.</li><li>Coordinate with OEMs and vendors regarding technical specifications, spare parts, equipment problems, and maintenance requirements.</li></ul> 7. Reliability &amp; Mechanical Maintenance Improvement <ul><li>Participate in the development and improvement of preventive and predictive mechanical maintenance programs.</li><li>Ensure implementation of Inspection and Reliability recommendations to improve mechanical equipment integrity and reliability.</li><li>Participate in Root Cause Analysis as a member of the Reliability/RCA team.</li><li>Participate in failure analysis reviews and maintenance strategy development for bad-actor mechanical assets.</li><li>Participate in troubleshooting with Mechanical Maintenance and Reliability teams to resolve recurring equipment reliability problems.</li><li>Analyze mechanical equipment failure history and recommend corrective and preventive actions.</li><li>Support development of maintenance strategies based on equipment criticality, failure modes, operating conditions, and maintenance history.</li></ul> 8. Vendor &amp; OEM Coordination <ul><li>Participate in vendor selection processes, including technical evaluations, site visits, vendor meetings, and technology reviews.</li><li>Coordinate with OEMs and vendors for resolving specific mechanical equipment problems.</li><li>Review OEM recommendations and assess their applicability to plant mechanical maintenance requirements.</li><li>Evaluate new mechanical maintenance technologies, tools, equipment, and techniques for potential implementation.</li><li>Coordinate vendor technical support during major mechanical maintenance, shutdown, and turnaround activities.</li></ul> 9. HSE, Quality &amp; Compliance <ul><li>Ensure Quality, Safety, Health, and Environmental procedures are complied with by employees, contractors, subcontractors, and vendors.</li><li>Ensure mechanical contractors comply with CLIENT HSE procedures, Permit-to-Work requirements, Method Statements, JSAs, Risk Assessments, and site safety requirements.</li><li>Prepare Method Statements and Job Safety Analysis for critical mechanical maintenance activities.</li><li>Participate in incident investigations and Root Cause Analysis and recommend corrective actions.</li><li>Conduct audits of mechanical work orders, maintenance activities, contractor documentation, and workshop repairs.</li><li>Ensure mechanical maintenance documentation is properly completed, controlled, updated, and maintained in accordance with quality standards.</li><li>Identify unsafe conditions or non-compliant contractor activities and ensure immediate corrective actions are taken.</li></ul> 10. Reporting &amp; Team Leadership <ul><li>Supervise the activities of assigned Senior Planners and planning personnel.</li><li>Prepare daily, weekly, monthly, annual, shutdown, turnaround, contractor performance, and management reports.</li><li>Monitor and report contractor performance, manpower utilization, productivity, schedule compliance, quality, HSE, and cost performance.</li><li>Prepare management reports highlighting progress, delays, risks, resource requirements, contractor issues, and recovery actions.</li><li>Conduct frequent site visits to verify actual work progress and contractor performance.</li><li>Coordinate with other disciplines to complete mechanical maintenance jobs within schedule and budget without compromising safety.</li><li>Keep abreast of developments in mechanical maintenance planning, contract management, reliability, technology, and industry best practices.</li><li>Perform other similar and related duties as assigned by management.</li></ul> MINIMUM REQUIREMENTS FOR THE JOB <ul><li>Bachelor's Degree in Mechanical Engineering and/or recognized certification as a Planning Engineer or equivalent experience.</li><li>Minimum <strong>10 years of relevant industry experience</strong> in maintenance planning within the <strong>Oil &amp; Gas industry</strong>, preferably in mechanical maintenance.</li><li>Proven experience in <strong>Mechanical Maintenance Contract Management and Contractor Management</strong>.</li><li>Strong <strong>site-based mechanical maintenance experience</strong>, including contractor supervision, field execution, shutdowns, turnarounds, and major maintenance activities.</li><li>Proven experience in preparing mechanical maintenance contract <strong>SOWs, technical specifications, BOQs/MTOs, cost estimates, tender documents, and technical bid evaluations</strong>.</li><li>Experience in contractor mobilization, manpower planning, productivity monitoring, progress measurement, KPI/SLA monitoring, variation assessment, and contract closeout.</li><li>Strong experience with mechanical maintenance of rotating and static equipment, piping, valves, pumps, compressors, heat exchangers, tanks, pressure equipment, and associated mechanical systems.</li><li>Strong knowledge of maintenance planning, scheduling, work-pack preparation, resource loading, critical-path analysis, shutdown, and turnaround planning.</li><li>Good knowledge of contractor performance management, tendering, procurement processes, and contract administration interfaces.</li><li>Proven ability to work directly with mechanical contractors and subcontractors in operating Oil &amp; Gas facilities.</li><li>Good knowledge of HSE requirements, Permit-to-Work systems, Method Statements, JSA, Risk Assessments, and field execution practices.</li><li>Good understanding of mechanical equipment reliability, preventive maintenance, critical spares, RCA, failure analysis, and maintenance strategies.</li><li>Good written and oral communication skills. Arabic language skills are an advantage.</li><li>Proven interpersonal, leadership, coordination, negotiation, and relationship-management skills.</li><li>Ability to work effectively in both <strong>office-based planning and site-based mechanical maintenance execution environments</strong>.</li><li>Fully versed with maintenance planning principles and techniques.</li><li>Excellent computer skills, including MS Office and relevant SAP, CMMS/ERP, planning, scheduling, and reporting systems.</li></ul> KEY COMPETENCIES <ul><li>Mechanical Maintenance Planning &amp; Scheduling</li><li>Mechanical Maintenance Contract Management</li><li>Contractor &amp; Subcontractor Management</li><li>Site-Based Mechanical Maintenance Execution</li><li>Shutdown &amp; Turnaround Planning</li><li>Contractor Mobilization &amp; Supervision</li><li>Rotating &amp; Static Equipment Maintenance</li><li>Pumps, Compressors, Valves &amp; Heat Exchangers</li><li>Piping &amp; Mechanical Equipment Maintenance</li><li>Tendering &amp; Technical Bid Evaluation</li><li>SOW &amp; Technical Specification Preparation</li><li>BOQ/MTO &amp; Cost Estimation</li><li>Contractor KPI/SLA Management</li><li>Progress Measurement &amp; Schedule Control</li><li>Variation &amp; Additional Work Assessment</li><li>Manpower &amp; Resource Planning</li><li>HSE &amp; Quality Compliance</li><li>Preventive &amp; Predictive Maintenance</li><li>Reliability &amp; RCA</li><li>Critical Mechanical Spares Planning</li><li>Vendor &amp; OEM Coordination</li><li>Shutdown/Turnaround Execution</li><li>Cross-Functional Team Leadership</li></ul> <br> <br> </div>

<p>Conduct Materials &amp; Corrosion Engineering activities and in-house site surveys for projects, from initial concept definition phase through to; engineering studies, FEED, detailed design and commissioning. Ensure the required Company technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in work-scopes and whilst conducting Materials &amp; Corrosion Engineering activities. Review technical deviations and variations to approved guidelines, codes, standards and practices. Support Engineering Department to review, update and apply Company standards and Company's amendments to external standards. Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements. Co-ordinate engineering designs, develop and review multi-disciplinary workscopes for projects and other engineering activities. Ensure that the work-scope is comprehensive and clear. Review and approve method statements developed by contracted organizations for scope compliance. Liaise with contracted organizations to resolve technical issues. Develop, update and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery. Conduct evaluation of technical bid packages for scope compliance. Review and evaluate the Contract Changes/Variation to approved guidelines and practices. Support the development of personal technical competency and skills and those of Coworkers. Participate in structured training for Associate Qatari Engineers Contribute towards updating HSE Codes, Standards, Specifications, and Philosophies.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Mechanical or Metallurgical Engineering<br>Chartered Engineer/ Professional Engineer status or equivalent is preferable.<br>10 years relevant post graduate experience, of which 6 years should be related to the Oil &amp; Gas industry.<br>Ability to identify and utilize relevant engineering standards and Codes related to Materials &amp; Corrosion Engineering.<br>Proven ability to manage time, cost and quality in engineering projects within a multiple project environment.<br>Good communications and presentation skills with fluency in English.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st largest global architecture firm and the #1 Firm in the Middle East Region in their 2024 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span>Our newest opportunity is for a talented <strong>Civil Engineer </strong>to join our award-winning team in <strong>Doha, Qatar</strong>.</span></p><br><p><span>This critical role will support in infrastructure and building construction projects, preferably including Kahramaa or similar utility projects.</span></p><br><p><span>We envisage success in this role to include:</span></p><br><ul><li><span>Supervising civil works to ensure compliance with approved drawings, specifications, contract requirements, and quality plans.</span></li><li><span>Monitoring contractor and subcontractor performance, including HSE, QA/QC, and progress.</span></li><li><span>Reviewing and approving, material submittals, method statements, shop drawings, IRs, and as-built drawings.</span></li><li><span>Ensuring proper inspection, testing, approval, and documentation, with clear records of conformance/non-conformance.</span></li><li><span>Identifying, reporting, and resolving technical issues and non-conformities, including implementation of corrective and preventive actions.</span></li><li><span>Ensuring all materials, works, and testing equipment meet required standards and calibration requirements.</span></li><li><span>Coordinating with multidisciplinary teams (civil, mechanical, electrical, process) to ensure design compatibility and interface alignment.</span></li><li><span>Supporting subcontractor evaluation, audits, and quality system verification.</span></li><li><span><span>Maintaining complete and traceable records of inspections, tests, approvals, and non-conformities.</span></span></li></ul> <br><strong>Qualifications</strong><br><p><span>To be successful in this dynamic opportunity, we envisage that you will have a minimum of a <strong>Bachelor’s degree in Civil Engineering </strong>or a related discipline, with ove<strong>r 10 years of experience</strong> in water infrastructure, pumping stations, and road construction works.</span></p><br><p><span>Furthermore, you should demonstrate:</span></p><br><ul><li><span>Hands-on experience in dewatering systems and temporary works.</span></li><li><span>Experience in design review and coordination, including identification of discrepancies and constructability issues.</span></li><li><span>Familiarity with QCS, Kahramaa specifications, and international standards.</span></li><li><span>Strong communication, coordination, and presentation skills, with ability to clearly present technical issues and solutions.</span></li><li><span>Proactive in problem-solving and decision-making under site conditions.</span></li><li><span>Skilled in preparing draft progress and contractual letters.</span></li></ul><p><span>KEO’s performance is founded upon integrity, results, innovation, safety, and our people. We embrace diversity and recognise its’ contribution to client success wherever we work.</span></p><br><p><span>We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</span></p><br> </div>

Job Description<br><br>Work closely with Project Manager, managing complex Automation projects with Control and Safety Systems.<br><br>Responsibilities<br><br> Be the main technical interface with Clients and Suppliers Build project team and manage internal resources (local and remote project people) Design, issue project documents, procure Honeywell material and 3 rd party goods and services, test supplied hardware and configuration, ship all goods with relevant certificates and final documentation Expedite activities and grant deliveries and quality Support site activities, finding the right resources Build and maintain long term relationships with existing customers and suppliers Be informed on last technical issues and workaround Knowledge of Honeywell hardware solutions (Experion, C300 and Safety Manager as minimum) and typical 3 rd party items (marshalling cabinets, power distribution panels, interposing relay panels, auxiliary consoles, cables, etc) <br><br>Qualifications<br><br> Bachelor's or Master’s Degree (Electronics/Automation engineering) 10-12 years working experience as Lead Engineer of Automation projects Proven track record in executing Automation projects for Oil&Gas or other markets Working experience with main EPC companies (Engineering Procurement and Construction – Saipem, Tecnimont, Technip, etc) and O&G End Users. <br><br>We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.<br><br>We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.<br><br>About Us<br><br>Honeywell Technologies is a global, pure-play automation company with a legacy of innovating to help solve the world’s most mission-critical challenges, enhancing the quality of life for people and communities around the world. We serve the building, industrial and process sectors with a broad portfolio of services, solutions and products, underpinned by our Honeywell Technologies Accelerator operating system and Honeywell Technologies Forge intelligence layer. By combining the deep domain expertise of our more than 50,000 employees with decades of data from our global installed base, we are uniquely positioned to lead the industrial sector’s transition from automation to autonomy.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Reporting structure <br></span><p><u><strong>Reports To&nbsp;</strong></u>&nbsp; &nbsp;Head of Maintenance<br><u><strong>Direct Reports&nbsp;&nbsp;</strong></u> &nbsp;Supervisor, Technicians</p><br> <p><strong>Work Location:</strong><br>Ras Laffan - State of Qatar<br>&nbsp;</p><br> <p><span><strong>** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **</strong></span></p><br> <br><br>Job Summary and Purpose <br><p>The Maintenance Engineer is responsible for proper functioning of all heating, ventilation, and air conditioning (HVAC) equipment in the yard and all structures, services in the main people buildings. The Maintenance Engineer leverages deep understanding of maintenance strategies in-order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of Maintenance in monitoring and implementing the strategies for managing the shipyards assets throughout their lifecycle. All works is executed to a high quality &amp; auditable standard that is consistent with the companies integrated management systems and policies. As an officer, a high level of trade skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.</p><br> <br><br>Accountabilities <br><p><u><b>Key Accountabilities:</b></u><br> 1)&nbsp;&nbsp; &nbsp;Develop a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking down the strategy into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy.<br> 2)&nbsp;&nbsp; &nbsp;Operate and maintain HVAC equipment, including but not limited to dehumidifiers, chillers, AHUs, pumps, fan coil units, Variable Refrigerant Volume (VRV) units, Air Cooled Condensing Unit (ACCU) units, window air-conditioning units, split air-conditioning units and ventilation systems and all its components.<br> 3)&nbsp;&nbsp; &nbsp;Operate and maintain Low Voltage (LV) Power &amp; Lighting system, Elevator, sliding door, Dock leveler, Building Maintenance Unit (BMU), Electrical Low Voltage (ELV) systems consisting of Access Control System, Barrier gate, Intercom and all its components.<br> 4)&nbsp;&nbsp; &nbsp;Operate and maintain other building systems and Plumbing equipment’s consist of potable water booster pumps, circulation pumps, water heaters and all its components. &nbsp;&nbsp;<br> 5)&nbsp;&nbsp; &nbsp;Prepare and manage all spare parts required for the maintenance of the Equipment and related assets.&nbsp;<br> 6)&nbsp;&nbsp; &nbsp;Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.<br> 7)&nbsp;&nbsp; &nbsp;Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.<br> 8)&nbsp;&nbsp; &nbsp;Prepare Scope Of Work (SOW), Scope Of Service (SOS) and Tender documentation for sub-contractors works.<br> 9)&nbsp;&nbsp; &nbsp;Supervise sub-contractors and ensure compliance with scope of work.<br> 10)&nbsp;&nbsp; &nbsp;Lead and supervise maintenance technicians.<br> 11)&nbsp;&nbsp; &nbsp;Prepare fit for purpose Work Permits and &nbsp;Risk Assessment for the identification, control and/or mitigation of workplace risk.<br> 12)&nbsp;&nbsp; &nbsp;Maintain maintenance records.<br> 13)&nbsp;&nbsp; &nbsp;Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.<br> 14)&nbsp;&nbsp; &nbsp;Communicate upwards – training needs, process improvement suggestions and follow up on implementation.<br> 15)&nbsp;&nbsp; &nbsp;Schedule and prioritize work considering all available resources.</p><br> <br><br>Accountabilities - 2 <br><p><u><b>Accountabilities-2:</b></u><br> 16)&nbsp;&nbsp; &nbsp;Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures, and any legislative requirements.<br> 17)&nbsp;&nbsp; &nbsp;Ensure compliance to quality management procedures and controls to deliver high quality services and products.<br> 18)&nbsp;&nbsp; &nbsp;Follow all safety procedures and report lapses, if any. Monitors yard facilities and reports to the Head of Maintenance, where necessary. &nbsp;<br> 19)&nbsp;&nbsp; &nbsp;Take corrective action on errors as defined in the IMS, as necessary.<br> 20)&nbsp;&nbsp; &nbsp;Ensure that the SAP Module is maintained according to the schedule.<br> 21)&nbsp;&nbsp; &nbsp;Implement and monitor compliance to department budgets and raises any deviation requirement.<br> 22)&nbsp;&nbsp; &nbsp;Monitor approved sub-contractors.<br> 23)&nbsp;&nbsp; &nbsp;Demonstrate leadership at monthly section review meeting.<br> 24)&nbsp;&nbsp; &nbsp;Support execution of daily operations, making sure maintenance plans are met.&nbsp;<br> 25)&nbsp;&nbsp; &nbsp;Contribute with timely updates and inputs such as lead and lag indication data to inform stakeholders to support internal decision making and performance review processes.&nbsp;<br> 26)&nbsp;&nbsp; &nbsp;Model a collaborative and cross-organizational relationship within and between maintenance and operations and support functions to ensure alignment to desired high performance culture.&nbsp;<br> 27)&nbsp;&nbsp; &nbsp;Foster an engaging culture of safe and productive work through role modelling N-KOM’s values. Ensure compliance with health, safety, security and environment standards.<br> 28)&nbsp;&nbsp; &nbsp;Ensure achievement of key performance indicators &amp; address performance issues.<br> 29)&nbsp;&nbsp; &nbsp;Performs any other assigned duties and responsibilities.&nbsp;</p><br> <br><br>Key Result Areas <br><p>•&nbsp;&nbsp; &nbsp;Safe and efficient maintenance activities execute - preventative &amp; corrective maintenance according to vessel stemming schedule.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Availability rates of equipment for operational effectiveness.<br> •&nbsp;&nbsp; &nbsp;Availability of HVAC, Dehumidifier, LV and ELV systems.<br> •&nbsp;&nbsp; &nbsp;Improvement of Maintenance KPIs<br> •&nbsp;&nbsp; &nbsp;Safety-zero harm</p><br> <br><br>Interactions and Working Relations <br><p><b><u>Internal:</u></b> All P&amp;M Staff, Operations sections in N-KOM, HSE Sections.<br> <u><b>Purpose: </b></u>To complete assigned jobs for departments as dispatched per operational need.&nbsp;&nbsp; &nbsp;</p><br> <p><u><b>External:</b></u> Sub-contractors, Ship/Vessel crew, clients, and OEM.<br> <u><b>Purpose:</b></u> To cultivate safe work behaviors by identifying hazard at the workplace, risk assessment and control measures.</p><br> <br><br>Financial Authorities <br><p><span><span><span>As per TOFA.</span></span></span></p><br> <br><br>Qualifications, Experience and Job Skills <br><p><u><strong>Qualifications:</strong></u><br>•&nbsp;&nbsp; &nbsp;Engineering Degree in Mechanical or HVAC.<br><u><strong>Experience:</strong></u><br>•&nbsp;&nbsp; &nbsp;5 years of relevant experience as a Mechanical Maintenance Engineer, HVAC Maintenance Engineer or equivalent.&nbsp;<br>Job Specific Competencies:</p><br> <p><u><strong>i. Behavioral Competencies</strong></u><br>•&nbsp;&nbsp; &nbsp;Drive Vision<br>•&nbsp;&nbsp; &nbsp;Interactive Communication<br>•&nbsp;&nbsp; &nbsp;Customer Centricity<br>•&nbsp;&nbsp; &nbsp;Solution Oriented<br>•&nbsp;&nbsp; &nbsp;Empower &amp; Nurture Talents<br>•&nbsp;&nbsp; &nbsp;Collaboration &amp; Teamwork<br>•&nbsp;&nbsp; &nbsp;Achievement Oriented</p><br> <p><u><strong>ii. Technical Competencies</strong></u><br>•&nbsp;&nbsp; &nbsp;O&amp;M Skill of HVAC, LV, Plumbing, and ELV Systems.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Read and comprehend HVAC drawings and schematics, including control diagrams.<br>•&nbsp;&nbsp; &nbsp;Understand HVAC systems and components.<br>•&nbsp;&nbsp; &nbsp;Capable of reviewing HVAC calculations and other technical data from contractors.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Capable of examining existing HVAC system to determine condition of systems and identify areas for improvement.<br>•&nbsp;&nbsp; &nbsp;Knowledge of all Building structures and services.<br>•&nbsp;&nbsp; &nbsp;Ability to learn requirements and needs of new systems.<br>•&nbsp;&nbsp; &nbsp;Perform shipyard maintenance operations.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Carry out facility management.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Planning and Organizing Skills.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Perform Mechanical and Electrical design and modification job.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Innovative and creative.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Leadership Skills.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Project Management Skills.<br>•&nbsp;&nbsp; &nbsp;Analytical Thinking and Problem-Solving Skills.<br>•&nbsp;&nbsp; &nbsp;Budgeting/Business Planning Skills.<br>•&nbsp;&nbsp; &nbsp;Presentation Skills.<br>•&nbsp;&nbsp; &nbsp;Change Management Skills.</p><br><br><br><br> </div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Senior Mechanical Engineer (Theme Park and Entertainment) to join our team in Qatar! In this role, you will be part of the Construction Supervision Consultant team supporting the delivery of a landmark luxury hospitality and entertainment development featuring immersive entertainment experiences, world-class hospitality, premium retail, and diverse leisure attractions. You will supervise the installation, testing, commissioning, and handover of conventional and specialist mechanical systems, including HVAC, chilled water, plumbing, utility networks, ride-support infrastructure, show HVAC, water attractions, filtration and water-treatment systems, life-support systems, and other themed entertainment installations.</p><h2>What You ll Be Doing:</h2><ul><li>Supervise the construction, installation, testing, and commissioning of all mechanical systems in accordance with the Contract Documents, approved IFC drawings, specifications, and applicable codes and standards.</li><li>Monitor the Contractor s mechanical works to ensure compliance with approved quality standards, construction methodologies, project schedules, and HSE requirements.</li><li>Review and provide technical comments on shop drawings, material submittents, method statements, RFIs, inspection requests, and other technical submissions related to mechanical works.</li><li>Supervise the installation and integration of HVAC, chilled water, plumbing, drainage, fire-protection interfaces, utility networks, and other building mechanical services.</li><li>Provide technical oversight for specialist themed entertainment mechanical systems, including ride-support infrastructure, show HVAC, water attractions, water-treatment and filtration systems, life-support systems, compressed-air systems, and other specialist installations.</li><li>Coordinate mechanical interfaces with structural, architectural, electrical, fire and life safety, ride systems, show systems, utility infrastructure, and specialist attraction vendors.</li><li>Witness inspections, Factory Acceptance Tests, Site Acceptance Tests, functional testing, and mechanical commissioning activities to verify compliance with project requirements.</li><li>Monitor construction quality through regular inspections, identify non-conforming works, and coordinate corrective actions with the Contractor and QA/QC team.</li><li>Support the Resident Engineer in evaluating variations, technical issues, engineering clarifications, and site instructions related to mechanical works.</li><li>Coordinate with operators, specialist suppliers, manufacturers, and commissioning teams to support the successful integration and operational readiness of all mechanical systems.</li><li>Participate in snagging, de-snagging, substantial completion inspections, handover activities, and Defects Liability Period inspections related to mechanical systems.</li><li>Review as-built drawings, operation and maintenance manuals, commissioning documentation, warranties, and handover records for completeness and compliance.</li><li>Prepare technical reports, inspection records, progress updates, and recommendations for submission to the Resident Engineer and Project Management team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>Professional Engineer, Chartered Engineer, or equivalent professional registration is preferred.</li><li>Minimum 12 years of experience supervising mechanical works on major hospitality, entertainment, mixed-use, or destination developments.</li><li>Demonstrated experience in Construction Supervision or Resident Engineering roles on large multidisciplinary projects.</li><li>Proven experience supervising mechanical systems associated with themed entertainment developments, water parks, attraction facilities, integrated resorts, or other complex leisure destinations.</li><li>Strong experience with HVAC systems, chilled water systems, plumbing, water-treatment and filtration systems, life-support systems, utility infrastructure, and mechanical building services.</li><li>Experience supervising testing and commissioning, integrated systems testing, operational readiness, and project handover.</li><li>GCC experience is highly desirable.</li><li>Comprehensive knowledge of mechanical engineering systems, construction-supervision practices, and contract compliance for major hospitality, entertainment, and mixed-use developments.</li><li>Strong understanding of HVAC systems, chilled water systems, plumbing, drainage, utility infrastructure, water-treatment and filtration systems, life-support systems, and specialist mechanical installations.</li><li>Extensive knowledge of mechanical systems supporting themed attractions, water rides, entertainment venues, and other specialized guest-experience facilities.</li><li>Strong understanding of construction inspections, material approvals, shop-drawing reviews, testing and commissioning, integrated systems testing, and handover processes.</li><li>Proven ability to coordinate multidisciplinary stakeholders, including Contractors, specialist attraction vendors, manufacturers, operators, consultants, commissioning teams, and statutory authorities.</li><li>Strong analytical and problem-solving capabilities, with the ability to identify construction issues, engineering conflicts, and practical site solutions.</li><li>Excellent communication, coordination, reporting, and stakeholder-management skills.</li><li>Ability to review and interpret IFC drawings, technical specifications, shop drawings, engineering calculations, commissioning documentation, and operation and maintenance manuals.</li><li>Strong organizational skills, with the ability to manage multiple work fronts while maintaining focus on quality, safety, schedule, and contractual compliance.</li><li>Ability to function effectively within large multidisciplinary construction environments while maintaining focus on engineering excellence, operational readiness, successful commissioning, and project handover.</li></ul>

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.