Embedded Systems Engineer Jobs in Qatar
9468 Jobs Found
Save and set alert for similar positionsManage alerts
<p><b>Position:</b> Control and Instrumentation Technician - (1) <b>Date Open:</b> Feb 19, 2026 <b>Closing Date:</b> May 31, 2026 <b>Principal:</b> Qatar District Cooling Company <b>Country:</b> Doha, Qatar</p><ul><li> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</li><li> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</li><li> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</li><li> Provide tuning for controls and equipment.</li><li> Test equipment and controls after maintenance has been done.</li><li> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</li><li> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</li><li> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</li><li> May provide assistance to control engineer in design/drawings of modifications.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position</p>
<p><b>Position:</b> Control and Instrumentation Technician - (1)</p><p><b>Date Open:</b> Feb 19, 2026</p><p><b>Closing Date:</b> May 31, 2026</p><p><b>Principal:</b> Qatar District Cooling Company</p><p><b>Country:</b> Doha, Qatar</p><ul><li> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</li><li> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</li><li> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</li><li> Provide tuning for controls and equipment.</li><li> Test equipment and controls after maintenance has been done.</li><li> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</li><li> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</li><li> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</li><li> May provide assistance to control engineer in design/drawings of modifications.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b></p><p>The job requires <b>Male</b> applicants.</p><p>Minimum of <b>5</b> years working experience is required for this position</p>
<p><b>Position:</b> Control and Instrumentation Technician - (1)</p><p><b>Date Open:</b> Feb 19, 2026 <b>Closing Date:</b> May 31, 2026 <b>Principal:</b> Qatar District Cooling Company <b>Country:</b> Doha, Qatar</p><ul><li> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</li><li> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</li><li> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</li><li> Provide tuning for controls and equipment.</li><li> Test equipment and controls after maintenance has been done.</li><li> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</li><li> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</li><li> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</li><li> May provide assistance to control engineer in design/drawings of modifications.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b></p><p>The job requires <b>Male</b> applicants.</p><p>Minimum of <b>5</b> years working experience is required for this position</p>
<p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p><b>Additional Qualifications:</b></p><p> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS’s and PDN’s.</p><p> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p> Provide tuning for controls and equipment.</p><p> Test equipment and controls after maintenance has been done.</p><p> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool’s standards.</p><p> May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b></p><p>The job requires <b>Male</b> applicants.</p><p>Minimum of <b>5</b> years working experience is required for this position</p>
<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>
<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>
<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>
<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>
<p>**Location:** Doha, Qatar (Full-time, On-site)
Company: Ihsan LLC
Product: Ihsan Super app
## About Ihsan
We are building **Ihsan — a super app for the global Muslim Ummah.**
Beginning with Ihsan Connect, an end-to-end encrypted messenger, and Ihsan Pay, a global payment system as well as our own gold-backed Ihsan Token.
Our long-term vision is to create a digital ecosystem that connects Muslims worldwide, frees the Ummah from Riba and leads to the start of a Digital Islamic Golden Age.
## The Role
We are looking for a **Founding Senior Cybersecurity Engineer** to take ownership of cybersecurity across the entire Ihsan ecosystem.
This is a hands-on engineering role. You will work directly with our founding team to design, implement, and maintain security systems protecting our users, their funds, and their communications.
## Key Responsibilities
- **Application Security:** Secure backend APIs, authentication systems, databases, and mobile applications.
- **Financial Security:** Protect digital wallets, stablecoin transactions, payment infrastructure, and cryptographic key management.
- **Cloud & Infrastructure Security:** Secure servers, cloud environments, networks, and production infrastructure.
- **Messaging Security:** Protect end-to-end encrypted communications, user privacy, and sensitive data.
- **Threat Detection:** Identify vulnerabilities, conduct security testing, and implement monitoring and incident response systems.
- **Secure Development:** Review code, implement security controls, and integrate automated security testing into development workflows.
## Why Join Ihsan?
- Join the founding team of an ambitious global technology platform.
- Take ownership of cybersecurity across multiple products from day one.
- Work directly with the founders and senior engineers.
- Solve challenging security problems involving FinTech, blockchain, and encrypted communications.
- Help build technology designed to serve the global Muslim Ummah.</p><p>## Required Experience
We are looking for a highly skilled, hands-on cybersecurity engineer with proven experience in financial technology.
**Requirements:**
- Senior-level experience in cybersecurity engineering.
- **Previous cybersecurity experience in FinTech, banking, payment processing, neobanking, or cryptocurrency platforms.**
- Proven experience securing production applications and financial infrastructure.
- Strong programming and scripting skills, with the ability to implement security solutions independently.
- Experience with application security, API security, authentication, and encryption.
- Experience securing cloud infrastructure, databases, and backend systems.
- Practical experience with penetration testing, vulnerability assessment, and incident response.
- Strong understanding of modern cyber threats and defensive security architecture.
- Excellent English communication skills.
- Willingness to work full-time, on-site in Doha, Qatar.
## Technical Skills
- **Application Security:** OWASP, API security, OAuth 2.0, secure coding, SAST/DAST.
- **Infrastructure:** AWS/GCP/Azure, Linux, Docker, Kubernetes, IAM, CI/CD security.
- **Financial Security:** Payment security, digital wallets, private key management, blockchain security.
- **Programming:** Go, TypeScript, Python, SQL, or similar languages.
- **Security Operations:** Penetration testing, vulnerability management, threat detection, incident response.
## Strong Advantages
- Experience at a neobank, payment processor, crypto exchange, or digital wallet provider.
- Experience with EVM, smart contracts, HSMs, or MPC.
- Experience securing end-to-end encrypted messaging platforms.
- Certifications such as OSCP, OSWE, CISSP, or GIAC.
- Previous experience working in the GCC.
**Important:** This is a hands-on engineering position, not a compliance, auditing, or security management role. We are looking for someone who can personally build and implement security solutions.</p>
<br><br><p>Key Responsibilities</p><ul><li><p>Protection scheme engineering and review</p></li><li><p>Auxiliary relay configuration and troubleshooting</p></li><li><p>Main and backup relay testing and validation</p></li><li><p>Final protection settings preparation and implementation</p></li><li><p>Support for commissioning and maintenance activities</p></li><li><p>Compliance with approved KM and customer requirements</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>KM-approved engineer with experience in protection schemes, auxiliary relays, main and backup relays, final protection settings, testing, commissioning, and substation protection systems.</p>
<strong>Building on our past. Ready for the future<br><br></strong>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br><strong>Responsibilities<br><br></strong><ul><li>Supports the standardization of equipment specifications, drawings, and document templates. </li><li>Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. </li><li>Uses local/global standards to support technical excellence. </li><li>Supports document checking and design verification tasks for compliance to company and project specifications. </li><li>Technical supervision of project designated mechanical designers and draftsmen in the execution of their duty. </li><li>Prepare of specifications, data sheets and other information covering Rotating equipment and system packages. </li><li>Performance of bid evaluation and vendor document review and approval </li><li>Technical writing activities, in particular, production of technical reports and operating manuals. </li><li>Manage studies and mechanical-rotating-orientated projects as assigned. </li><li>Preparation of technical requisition, stipulation of inspection and testing requirement and documentation </li><li>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. </li><li>Supports Lead Engineer in monitoring quality activities and takes action where required. </li><li>Assist Project Team in project documentation such as proposals, estimates, budgets and schedules </li><li>Prepare and participate in weekly mechanical discipline meetings, prepare progress reports and follow required checking procedures. </li><li>Review and approve all related technical documents and coordinate with the Lead Engineer. </li><li>Management, technical execution and completion of engineering assigned tasks in the specific mechanical-rotating discipline area Provide rotating equipment engineering input to conceptual studies, front end engineering and detailed engineering design for petrochemical, refineries and oil & gas facilities including the associated utilities. </li><li>Quality Assurance: Accountable for working within the provisions and guidelines of Quality Assurance systems.</li><li>Safety: Accountable for personal safety safe, safe working practices. Working knowledge and follow OH & S procedures promoting health, safety and environmental awareness.</li><li>HSE Capability:</li><ul><li>Maintain HSE focus with the team to ensure OHSE requirements.</li><li>Demonstrate business practices commensurate with a culture of world’s best health, safety and environmental performance.</li><li>Demonstrate a visible and engaged reliability to:</li><li>personal well-being;</li><li>healthy and safe workplaces and activities; and</li><li>Continuously improve Worley health, safety and environmental performance.</li><li>Identify and report work hazards and incidents. <br></li></ul></ul><strong>Education – Qualifications, Accreditation, Training<br><br></strong><ul><li>Full-Time Bachelor’s Degree in Mechanical Engineering from an accredited university. </li><li>MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. </li><li>Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br></li></ul><strong>Industry Experience<br><br></strong><ul><li>Candidate shall have vast experience in Oil & Gas sector in GCC </li><li>Candidate must have experience in Detailed Design, FEED in Mechanical Engineering </li><li>Candidate shall have Mechanical engineering knowledge and familiar with Standards/Codes, QP specs.</li><li>Past experience as a Rotating Engineer for Upstream & Midstream Gas Turbines will be an advantage </li><li>Must have good experience with compressors & Pumps <br><br></li></ul><strong>Moving forward together<br><br></strong>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
Primary Purpose Of The Job<br><br>The primary purpose of this role is to analyze well integrity–related data across onshore and offshore fields and to serve as the end‑user focal point for the implementation and ongoing maintenance of the Well Integrity Management System (WIMS).<br><br>Required Experience And Skills<br><br>Minimum of 7 years of work experience in data analyst activities. Must have experience in designing and creating relational databases (example: SQL Server, MS Access..). Some exposure to Petroleum or Reservoir Engineer activities or Well Integrity investigations is a plus.<br><br>Educational Qualifications<br><br>Bachelor’s degree (BSc) in Computer Science, Information Technology, or a related discipline, supplemented by industry-recognized courses in Engineering and Geoscience data management. Degrees in Petroleum Engineering, Mechanical Engineering, Software Engineering, Computer Science, or Information Systems will also be considered, provided they are supported by relevant industry training in computer applications.
<p><strong>Job Summary</strong></p><p>The QA/QC Engineer ensures that all project and construction activities are executed in accordance with approved project specifications, quality standards, and industry best practices. The role is responsible for implementing and monitoring the Project Quality Management System, ensuring compliance with approved Quality Plans, Inspection and Test Plans (ITPs), method statements, and quality procedures to deliver projects within the required timeframe and to the client's quality expectations.</p><p><br></p><p><strong>Job Responsibilities</strong></p><ol><li>Assist the Project QA/QC Manager or Senior QA/QC Engineer in implementing the Project Quality Management System in accordance with the approved Project Quality Plan and IMS procedures.</li><li>Prepare and submit Work Inspection Requests (WIRs) for all construction activities and coordinate with consultants to obtain required inspections and approvals.</li><li>Ensure all construction activities are performed in compliance with approved project specifications, quality standards, method statements, and Inspection and Test Plans (ITPs).</li><li>Inspect and verify incoming materials against project specifications, approved material submittals, and applicable quality requirements.</li><li>Monitor the status of WIRs, test reports, inspections, and quality records, and provide regular updates to the QA/QC Manager and project team.</li><li>Establish and maintain QA/QC Plans, Method Statements, Inspection and Test Plans, and related quality documentation prior to project commencement and throughout project execution.</li><li>Ensure effective implementation of document control procedures and proper distribution of approved documents through the document control system.</li><li>Review and verify that all method statements, test plans, and quality-related submissions are approved and available before commencement of relevant construction activities.</li><li>Coordinate with site teams, consultants, and subcontractors to ensure quality requirements are understood and consistently implemented throughout the project lifecycle.</li><li>Maintain accurate quality records, inspection reports, and testing documentation to demonstrate compliance with project and contractual requirements.</li><li>Identify quality non-conformities, support corrective and preventive actions, and follow up on their effective closure.</li><li>Ensure all completed works meet project quality standards, regulatory requirements, and client expectations before handover.</li></ol><p><br></p><p><strong>Job Knowledge & Skills</strong></p><ul><li>Knowledge of international and local quality standards, codes, and specifications such as <strong>ISO 9001, QCS, SMACNA, ASHRAE, NFPA</strong>, and other applicable industry standards.</li><li>Strong technical expertise in identifying, analyzing, and resolving QA/QC issues across construction and engineering activities.</li><li>Sound understanding of <strong>Quality Management Systems (QMS)</strong> and <strong>Integrated Management Systems (IMS)</strong>, including quality assurance processes, audits, inspections, and corrective actions.</li><li>Ability to review and interpret project specifications, drawings, method statements, Inspection and Test Plans (ITPs), and quality procedures.</li><li>Knowledge of local regulations, construction standards, and statutory compliance requirements.</li><li>Strong analytical, problem-solving, documentation, and reporting skills.</li><li>Effective coordination and communication skills with clients, consultants, contractors, and project teams.</li><li>Proficiency in quality documentation, inspection processes, and control of records.</li><li>ERP knowledge, preferably <strong>SAP</strong>, with strong functional and reporting capabilities.</li><li>Proficient in Microsoft Office applications and quality management tools.</li></ul><p><br></p><p><strong>Job Experience</strong></p><ul><li>Minimum <strong>5 years</strong> of total professional experience.</li><li>Minimum <strong>3 years</strong> of relevant experience in QA/QC within construction, engineering, or building services projects.</li><li><strong>GCC experience of at least 2 years is preferred.</strong></li><li>Experience in implementing and maintaining Quality Management Systems, conducting inspections, preparing quality documentation, and coordinating with consultants and clients.</li><li>Proven experience in managing Work Inspection Requests (WIRs), material inspections, testing activities, and quality compliance throughout project execution.</li></ul><p><br></p><p><br></p>
<p>The main role of the Technician is to perform preventive and corrective maintenance, to assist his team, and to support the improvement efforts in the department in order to increase the performance. Furthermore, to report any fault on the equipment to the Engineer, TO, STO.</p><p>Do the PPM assigned correctly and on time. Perform corrective tasks and complete them on time. Ensure high quality of their work. Assist subcontractors to perform the work assigned to them. Report defects, issues, breakdowns, damages, etc., to the Fault Reporting Center or Engineer, TO, STO. Follow the duty roster. Report any spare part requirements and availability. Follow all instructions as given by the TO,STO, Engineers. Take care of the tools, test tools and equipment. Perform other related duties as assigned.</p><p>Comply with the Company standards specifically related to personal hygiene, dress code and behaviour. Comply with health procedures, quality and in general all the relatives of HSEQ. Follow the rules and regulations from the client and from FMM s HSEQ Management System, which includes attending all training sessions you are invited to and by reading the documents provided to them. Escalate to their line manager any lack of proper equipment or tools for doing the work. Report any accident, incident, near miss or health event at work to their line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>ITI Certificate/Diploma or equivalent Knowledge of regulations (e.g., OSHA, MSDS, NFPA, BS). Problem solving skills. Ability to work with tight deadlines and within constraints. Teamwork.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job Title: Senior Safety Engineer</strong>
<p><strong>Location:</strong> Doha, Qatar<br>
<strong>Industry:</strong> Roads & Infrastructure<br>
<strong>Employment Type:</strong> 1-Year Contract (Extendable)<br>
<strong>Working Hours:</strong> 8 hours/day, 6 days/week</p><br><br>
<strong>Job Overview</strong>
<p>We are seeking a highly experienced <strong>Senior Safety Engineer</strong> to oversee and enforce health, safety, and environmental (HSE) compliance on major roads and infrastructure projects. The candidate will play a key role in ensuring that all site activities are executed safely and in accordance with project specifications, local regulations, and international safety standards.</p><br><br>
<strong>Key Responsibilities</strong>
<ul>
<li>Lead and implement <strong>HSE policies and procedures</strong> across road and infrastructure project sites</li>
<li>Monitor and ensure compliance with <strong>project safety plans, method statements, and risk assessments</strong></li>
<li>Conduct regular <strong>site safety inspections, audits, and risk assessments</strong> for: <ul>
<li>Road works and highways</li>
<li>Earthworks and excavation</li>
<li>Utilities and drainage works</li>
<li>Traffic diversions and temporary works</li>
</ul>
</li>
<li>Identify hazards, unsafe practices, and potential risks; ensure timely corrective actions</li>
<li>Review and approve <strong>Method Statements (MS), Job Safety Analysis (JSA), and Risk Assessments (RA)</strong></li>
<li>Lead and coordinate <strong>incident/accident investigations</strong>, root cause analysis, and reporting</li>
<li>Ensure proper implementation of <strong>Permit-to-Work (PTW) systems</strong></li>
<li>Conduct <strong>safety inductions, toolbox talks, and training sessions</strong> for site personnel</li>
<li>Monitor contractor compliance with <strong>HSE requirements and safety KPIs</strong></li>
<li>Liaise with consultants, contractors, and client representatives on safety matters</li>
<li>Ensure compliance with <strong>local authority regulations and international HSE standards</strong></li>
<li>Maintain accurate <strong>safety records, reports, and documentation</strong></li>
<li>Support emergency response planning and execution on site</li>
</ul>
<strong>Requirements</strong>
<ul>
<li>Bachelor’s Degree in Engineering or relevant field</li>
<li>Minimum <strong>12+ years of HSE experience</strong>, with strong focus on <strong>roads and infrastructure projects</strong></li>
<li>Proven experience working on: <ul>
<li>Roads / highways</li>
<li>Infrastructure / utilities / drainage projects</li>
</ul>
</li>
<li><strong>GCC experience is mandatory</strong> (Qatar preferred)</li>
<li>Strong knowledge of: <ul>
<li>HSE regulations and best practices</li>
<li>Risk assessment and hazard identification</li>
<li>Incident investigation techniques</li>
</ul>
</li>
<li>Experience with <strong>permit-to-work systems, safety audits, and compliance monitoring</strong></li>
<li>Professional certifications such as: <ul>
<li>NEBOSH IGC (mandatory)</li>
<li>IOSH / OSHA certifications (preferred)</li>
</ul>
</li>
<li>Familiarity with <strong>Ashghal / local Qatar HSE standards</strong> is an advantage</li>
<li>Strong leadership, communication, and reporting skills</li>
</ul>
<strong>Preferred Qualifications</strong>
<ul>
<li>Previous experience on <strong>Ashghal or large-scale infrastructure projects</strong></li>
<li>Ability to manage multiple contractors and large site teams</li>
<li>Strong documentation and reporting capabilities</li>
</ul><br> </div>
<strong>Job Description<br><br></strong>Deep technical expertise in data engineering, machine learning, and cloud AI services with strong governance and policy awareness, ensuring scalable, secure, and ethical use of AI in alignment with organizational goals.<br><br><strong>Responsibilities<br><br></strong><ul><li>Design, build, and manage data pipelines and analytics platforms using Azure Data Factory, Synapse Analytics, and Data Lake.</li><li>Develop, train, and deploy machine learning and AI models on Azure Machine Learning and integrate with other cloud platforms where needed. </li><li>Implement data governance, security, and compliance controls across multi-cloud environments. </li><li>Contribute to and support the organization’s AI and data strategy, ensuring alignment with digital transformation initiatives. </li><li>Ensure multi-cloud interoperability, including the ability to migrate and optimize AI workloads across Azure, Google Cloud, and AWS. </li><li>Conduct data analysis, reporting, and visualization using Power BI, Tableau, or equivalent tools. </li><li>Evaluate and adopt emerging AI/ML services from multiple cloud providers to maximize value. </li><li>Document and enforce AI governance frameworks, policies, and ethical guidelines. </li><li>Collaborate with IT, governance bodies, and business stakeholders to identify AI use cases that deliver tangible business outcomes. </li><li>Provide technical mentorship, training, and awareness sessions on AI and data tools to internal teams. <br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Bachelor’s degree in computer science, Data Science, AI, or related field (required). </li><li>Master’s degree in AI, Business Analytics, or Information Systems (preferred). <br><br></li></ul><strong>Certifications <br><br></strong><ul><li>Azure certifications (Azure AI Engineer Associate, Azure Data Scientist, or Azure Solutions Architect) are highly desirable. </li><li>Multi-cloud or vendor certifications (e.g. Google Cloud Professional ML Engineer, etc.) are a plus. <br><br></li></ul><strong>Technical Expertise <br><br></strong><ul><li>Strong hands-on experience with Microsoft Azure AI and Data Services (Azure ML, Synapse, Cognitive Services, Data Factory, Data Lake). </li><li>Familiarity with multi-cloud integration and migration strategies. </li><li>Proficiency in Python, R, SQL, and AI/ML frameworks (TensorFlow, PyTorch, Scikit-learn). </li><li>Knowledge of data governance, MLOps, and ethical AI frameworks. </li><li>Experience in data visualization with Power BI, Tableau, or equivalent. </li><li>Strong problem-solving and system integration skills. </li><li>Fluency in English (required); proficiency in Arabic is highly desirable. <br><br></li></ul><strong>Personal Competencies <br><br></strong><ul><li>Strategic mindset with the ability to bridge AI innovation and business needs. </li><li>Strong communication skills to engage both technical and non-technical audiences. </li><li>Agile, adaptable, and experienced in multi-cloud and hybrid environments. </li><li>High integrity in managing data, privacy, and ethical considerations. </li><li>Collaborative and proactive in cross-functional teams.</li></ul>
<p>The Service Provider shall provide a cabin seat expertise service that shall include, but not limited to, the below described activities:</p><p>1. CABIN SURVEY</p><ul><li>Conduct cabin survey to identify operational defects related to the Aircraft Seats.</li><li>Support meet & greet.</li><li>Analyze the spare parts listed in the aircraft logbooks and linked to the Aircraft Seats, this list shall be part of the daily activity report.</li><li>Implement an Action Item Log to follow-up in-service technical issues linked to the Aircraft Seats.</li><li>Take any action to prevent seat lockout (day to day activity).</li></ul><p>2. TECHNICAL ASSISTANCE</p><ul><li>Assist Customer with detailed troubleshooting of the seats.</li><li>Guide and oversee the workshops with repair and refurbishment procedures.</li><li>Support working party by advising the Customer s Technicians or any third party appointed by Customer.</li><li>Meet with any Customer department involved in seats maintenance (including but not limited to line maintenance, engineering, purchasing, repair) in order to identify and follow-up any open issues.</li><li>Offer recommendation for seat routine maintenance, refurbishment and overhaul work packages.</li></ul><p>3. TRAINING</p><ul><li>Organize cabin crew training courses.</li><li>Deliver On-Job Trainings (OJT) to Customer s technicians.</li><li>These trainings shall focus on troubleshooting instructions, equipment maintainability recommendations, line & workshop maintenance, answering to any question Customer technicians shall have.</li></ul><p>4. TECHNICAL EVENTS MONITORING</p><ul><li>Fill and submit an Equipment Event Follow-up Form for each operational defect related to the Aircraft Seats.</li><li>Follow-up Reliability of Customer products in service, including providing feedback reports.</li><li>Provide regular activity reports to the defined stakeholders.</li><li>Collect feedback from Customer on delivered Support such as, but not limited to, Seat reliability, Support performance delivery, etc.</li></ul><p>5. SERVICE ASSISTANCE</p><ul><li>Monitor and analyze spare parts consumed by Customer from the consignment stock.</li><li>This activity includes physical inventory once a month with delivery of inventory report.</li></ul><p>6. COMMERCIAL ASSISTANCE</p><ul><li>Contribute to Customer satisfaction</li><li>Promote Customer Support Services, Spares and Repairs capabilities to Customer</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Aeronautical or Aerospace Engineering or Systems or Design Engineer</p><p>Aeronautical or Aerospace Engineering or Systems or Design Engineer</p><p>Experience in Aviation Seats.</p><p>Desirable knowledge of A321 business class seats.</p><p>Desirable knowledge of Arabic</p><p>Proficiency in English.</p><p>Computer skills - desirable.</p><p>Good communication skills.</p><p>Customer and problem solving oriented.</p>
<p>A Facilities Engineer plays a crucial role in the maintenance and management of building systems and infrastructure. They are responsible for ensuring that all facilities operate efficiently and safely.</p><br><ul><li><p>Design, implement, and manage facility upgrades and renovations</p></li><li><p>Supervise routine maintenance and repairs of building systems</p></li><li><p>Ensure compliance with health and safety regulations</p></li><li><p>Develop and manage budgets for maintenance and operational expenses</p></li><li><p>Coordinate with contractors and service providers for specialized tasks</p></li><li><p>Monitor and evaluate building systems for performance and efficiency</p></li><li><p>Prepare reports on facility operations and maintenance activities</p></li><li><p>Conduct facility inspections to identify issues and implement corrective actions</p></li><li><p>Implement energy-saving initiatives and sustainability programs</p></li><li><p>Ensure proper functioning of HVAC, electrical, and plumbing systems</p></li><li><p>Plan and oversee facility layout alterations and modifications</p></li><li><p>Respond to emergency situations involving facility infrastructure</p></li><li><p>Maintain accurate records of maintenance work and facility modifications</p></li><li><p>Collaborate with other departments to support operational needs</p></li><li><p>Develop and implement preventive maintenance programs</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering</p></li><li><p>Minimum of 4-8 years of experience in facilities management & Maintenance</p></li><li><p>Good knowledge and experience in HVAC, electrical, and plumbing systems</p></li><li><p>Excellent verbal and written communication skills</p></li><li><p>Ability to read and interpret blueprints and technical drawings</p></li></ul>
<ol><li><p>Install, commission, and configure pipeline inspection equipment.</p></li><li><p>Operate CCTV pipeline inspection robots and sonar inspection systems during demonstrations and customer projects.</p></li><li><p>Conduct Proof of Concept (POC) and live product demonstrations.</p></li><li><p>Perform preventive maintenance and troubleshooting of robotic inspection systems.</p></li><li><p>Diagnose and resolve mechanical, electrical, software, and communication issues.</p></li><li><p>Train customers on system operation, inspection procedures, and routine maintenance.</p></li><li><p>Generate inspection reports and maintain service documentation.</p></li><li><p>Support the sales team with technical presentations and customer meetings.</p></li><li><p>Coordinate with the manufacturer for technical support, warranty claims, and software updates.</p></li><li><p>Maintain service records, spare parts inventory, and maintenance schedules.</p></li><li><p>Ensure all work complies with company safety procedures and customer site requirements.</p></li><li><p>Travel within Qatar and occasionally overseas for product training or technical support.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>We are looking for a highly motivated Pipeline Inspection Service Engineer to join our team in Qatar. The candidate will be responsible for installation, commissioning, operation, maintenance, troubleshooting, and technical support of Pipeline CCTV Inspection Systems and Sonar Inspection Systems. The role also includes conducting customer demonstrations, Proof of Concept (POC), operator training, and providing after-sales technical support for municipal, utility, infrastructure, and industrial clients.</p>
<strong>Job Description<br><br></strong><strong>Job Overview:<br><br></strong>The Principal Installation Analysis Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Installation Analysis-related problems and will work independently with minimal guidance. The Principal Installation Analysis Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Installation Analysis. As such, they must have in-depth expertise in Installation Analysis as well as broad knowledge of the Installation Analysis discipline within the Engineering function.<br><br><strong>Responsibilities<br><br></strong><strong>Key Tasks and Responsibilities: <br><br></strong><ul><li>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards</li><li>Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations</li><li>Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures</li><li>Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements</li><li>Communicate and explain difficult concepts and persuade others to adopt a point of view</li><li>When acting as Lead Engineer, in addition:</li><ul><li>Direct an Engineering team as a Lead Engineer</li><li>Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard</li><li>Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager</li><li>Ensure interfaces and deliverables are clearly identified</li><li>Maintain responsibility for progress and productivity, identifying any required corrective action</li><li>Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.</li></ul><li>Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address issues, interpreting contractual requirements as they relate to engineering execution</li><li>Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for variation orders</li><li>Interface with all disciplines to develop clash-free designs</li><li>Interface with other departments to obtain input for discipline designs and drawings</li><li>Maintain close coordination with other engineering disciplines, Planning, fabrication, Marine, and Project Management Teams, as required</li><li>Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager</li><li>Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements</li><li>Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements</li><li>Prepare, review, and (as Lead Engineer) approve engineering design basis, philosophies, and technical specifications</li><li>Participate in finalizing deliverable lists and deliverables, ensuring compliance with specifications and functional integrity</li><li>Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope</li><li>Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required</li><li>Provide technical direction and review of Designers producing products related to Installation Support Engineering</li><li>Prepare, review, and (as Lead Engineer) approve design reports and procedures</li><li>Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables</li><li>Assist procurement personnel in procuring discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer</li><li>Assist in updating weight report based on receipt of vendor information</li><li>Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary</li><li>Review and (as Lead Engineer) approve design verification through single-discipline check /inter-discipline check (IDC)</li><li>Provide technical support to all fabrication queries, including identifying defect/rectification requirements</li><li>Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary and manpower related</li><li>Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity</li><li>Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved</li><li>Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements</li><li>Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures</li><li>Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval</li><li>Capture lessons learned and enter into MDR’s Lessons Learned system</li><li>Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, auditors, third parties, etc.) on their review and approval</li><li>Supervise and guide assigned engineers and coordinate with Lead Designers for Discipline engineering and design deliverables</li><li>Responsible for the engineering integrity of the assigned work area</li><li>Monitor costs of own work processes</li><li>Assist in the maintenance of departmental technical guidelines and standard calculation notes</li><li>Participate in development and maintenance of Global Procedures, Software, and Standards</li><li>May participate in standards development committees or task groups such as API</li><li>Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at ‘lunch and learn’; etc.)</li><li>Identify and provide training to staff in specific techniques and proprietary software</li><li>Provide information on employee performance to the Discipline Manager</li><li>Assist the Discipline manager in interviewing job applicants</li><li>Perform, review, and (as Lead Engineer) approve Pipeline Installation engineering designs, analyses, evaluations, calculations, and procedures for loadout, transportation, and installation (including installation aids):</li><ul><li>Submarine pipelines</li><li>Risers</li><li>Spools</li><li>PLETS and manifolds</li><li>Cables</li></ul><li>Perform, review, and (as Lead Engineer) approve Structural Installation engineering designs, analyses, evaluations, calculations, and procedures for loadout, transportation, and installation (including installation aids) of offshore structures, including barge upgrades/modifications</li><li>When acting as Lead engineer, in addition:</li><ul><li>Act as project-based discipline point of contact in communications and meetings with customer counterparts</li><li>Ensure substantive communications are documented</li><li>Prepare bids and projects discipline engineering budget and execution plans</li><li>Identify project staff needs based on knowledge of individual engineer’s skill sets and provide requests to the discipline manager</li><li>Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets</li><li>Plan discipline deliverable schedule/register compliant with the overall execution plan</li><li>Prepare work forecasts identifying change management plans, corrective action, and real-time schedule</li><li>Provide discipline inputs for actual, planning, and forecasting progress reports including associated productivity</li><li>Alert the project team of any deviation from the scope or a need for a change order</li><li>Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others</li><li>Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs</li><li>Review and approve requisitions, technical quotation evaluations and queries, compiled bid tabulations and recommendations, and purchase requisitions: and coordinate with Procurement to expedite vendor documents as required</li><li>Lead the Discipline team during project audits (internal, Customer and third-party technical audits) and Design reviews</li><li>Review comments from customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation</li><li>Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning</li><li>Anticipate project engineering needs and plan accordingly</li><li>Coordinate with vendor for discipline-managed/produced items</li><li>Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members <br></li></ul></ul>Reports to: Manager (Construction Support Eng)<br><br>Liaise With: All Engineering disciplines, Fabrication Dept, Marine Dept, Safety Dept, Project Management Team, Document<br><br>Control, Project Planner, Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors and<br><br>Vendors, and Customers<br><br>Supervises: Senior Engineers and Engineers<br><br><strong>Qualifications<br><br></strong><strong>Essential Qualifications and Education: <br><br></strong><ul><li>Bachelor’s Degree in Naval Architecture, Civil/Structural/Mechanical Engineering (Master’s is a preference)</li><li>15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design</li><li>Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills</li><li>Preferably Registered Professional Engineer or member of a professional engineering society <br><br></li></ul><strong>About Us<br><br></strong>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.<br><br>
Receive email alerts for Embedded Systems Engineer Jobs in Qatar jobs
You can cancel your email alert at anytime