Heavy equipment mechanical engineer Jobs

Bachelor’s degree in Civil Engineering, Mechanical Engineering, or a related discipline. Minimum 9 years of relevant experience in water meter installation or related utility works.. Proficiency in water meter installation, operation, and maintenance. Strong knowledge of water distribution systems and smart metering technologies. Knowledge of Non-Revenue Water (NRW) management practices. Experience in testing, commissioning, and verification of utility metering systems. Ability to work in site-based environments with frequent inspections andsupervision. Written and spoken English is essential; Arabic is preferred.

Primary Purpose Of The Job<br><br>Responsible for leading VOR Disciplines Engineers, Disciplines Technicians in coordination with Qatar Energy Project Team and Contractors to ensure consistent and standardized execution of Project design, pre- commissioning, commissioning and start-up activities for Operational Area (VO) Projects in accordance with approved Qatar Energy Procedures, Guidelines, Engineering Design, Safety & Environmental Standards/Specifications and Scope of Work to ensure that:<br><br>Operational Area Asset Owners are fully ready to assume ownership of the asset at the point of delivery/handover, and that they are able to operate and maintain that asset in a safe, reliable and sustainable manner.<br><br>Operational Area (VO) Projects are delivered much faster, at much lower cost and at the highest productivity while maintaining the highest standard in quality and HSE.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ experience in design, construction, commissioning and start-up of oil & gas processing and production facilities (Onshore/Offshore), preferably with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader. Experience in operations, maintenance, and projects’ pre-commissioning, commissioning, start up and Hand-over activities. Excellent interpersonal, communication and leadership skills. Relevant technical expertise. Multi-discipline engineering exposure with trouble-shooting and problem solving skills. Good IT and analytical skills with the ability to work well under pressure.<br><br>Educational Qualifications<br><br>Bachelor’s degree in engineering Discipline preferably Chemical / Process / Mechanical Engineering. Chartered Engineer status or equivalent is preferable.

The Talent Engine of Middle East is HIRING????!<br>Engineer (Key Customer)<br>Responsibilities Manage relationships with key bulk water customers to ensure high service levels and customer satisfaction. Oversee the installation, maintenance and performance of water metering systems, ensuring metering accuracy and data reliability. Provide technical support on water metering, billing, and operational issues while coordinating timely resolution with internal teams. Monitor water consumption, service performance, and operational data, preparing reports and recommendations for continuous improvement. Coordinate with operations, metering and customer service teams to ensure uninterrupted service delivery. Ensure compliance with ISO standards, Health & Safety regulations and company operational policies. Maintain accurate technical documentation, customer records and support customer engagement initiatives.<br>Requirements Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related discipline. Minimum 9 years' experience in key account management, water distribution systems, or utility operations. Strong knowledge of water distribution networks, bulk water operations, and smart metering technologies. Proven skills in customer relationship management, technical problem-solving, data analysis, and reporting. Fluent in English (written and spoken); Arabic is preferred.<br>???? Location: Qatar⏳ Duration: Long Term<br>If you meet the above criteria, please send your Updated CV & Certificates to:???? Email: kisivuli@madre-me.com | resumes@madre-me.zohorecruitmail.com ‬‬‬‬‬???? Mobile/Whats App : +974 31171747

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Senior Technical HSE Engineer</strong><br> <strong>Qualifications</strong><ul><li>Bachelor's Degree in Chemical or Mechanical Engineering.</li><li>Chartered/Professional Engineer certification preferred.</li></ul><strong>Experience</strong><ul><li>10+ years of post-graduate experience, including 6+ years in the Oil &amp; Gas industry.</li><li>Strong knowledge of Technical HSE engineering standards, codes, and practices.</li><li>Experience in engineering project delivery, safety compliance, and multidisciplinary coordination.</li><li>Strong communication, presentation, and technical reporting skills.</li></ul><strong>Key Responsibilities</strong><ul><li>Provide Technical HSE engineering support across all project phases, from concept and FEED to detailed design and commissioning.</li><li>Ensure compliance with engineering standards, HSE requirements, and project quality objectives.</li><li>Conduct site surveys, technical reviews, risk assessments, and engineering studies.</li><li>Review and approve technical documents, method statements, bid packages, and contract variations.</li><li>Coordinate with multidisciplinary teams and contractors to resolve technical issues.</li><li>Monitor engineering schedules and support effective project execution.</li><li>Contribute to the development and implementation of engineering standards and best practices.</li><li>Mentor junior engineers and support technical competency development.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

Primary Purpose Of The Job<br><br>Responsible for leading Operation Readiness Disciplines Engineers, Disciplines Technicians in coordination with Qatar Energy Project Team and Contractors to ensure consistent and standardized execution of Project design, pre- commissioning, commissioning and start-up activities for Operational Area (Operations Directorate) Projects in accordance with approved Qatar Energy Procedures, Guidelines, Engineering Design, Safety & Environmental Standards/Specifications and Scope of Work to ensure that:<br><br> Operational Area Asset Owners are fully ready to assume ownership of the asset at the point of delivery/handover, and that they are able to operate and maintain that asset in a safe, reliable and sustainable manner. Operational Area (Operations Directorate) Projects are delivered much faster, at much lower cost and at the highest productivity while maintaining the highest standard in quality and HSE.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ experience in design, construction, commissioning and start-up of oil & gas processing and production facilities (Onshore/Offshore), preferably with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader.<br><br>Experience in operations, maintenance, and projects’ pre-commissioning, commissioning, start up and Hand-over activities.<br><br>Educational Qualifications<br><br>Bachelor’s degree in engineering Discipline preferably Chemical / Process / Mechanical Engineering. Chartered Engineer status or equivalent is preferable.

<p>We are seeking a Tendering / Proposal Engineer to support the preparation and submission of tenders and proposals for engineering projects in Qatar within the oil &amp; gas sector. The role will focus on developing technical and commercial proposals, coordinating tender requirements, and ensuring accurate and timely submissions.</p><p>Review tender documents, requirements, and specifications. Prepare technical and commercial proposals for engineering projects. Coordinate with relevant teams to collect technical and commercial information required for tender submissions. Support estimation and proposal preparation activities. Ensure tender documentation is complete and submitted within required deadlines. Follow up on tender and proposal requirements throughout the submission process. Maintain accurate tender and proposal documentation.</p><p>If you would like to know more about the Global Consulting Bootcamp Visit: https://caseinpointco.com/global-consultant-bootcamp/ If you would like to know more about the MC Club Visit: https://menaconsultant.com/mc-club/</p><p><strong>Desired Candidate Profile</strong></p><p><b>Key Requirements</b></p><p>Bachelor's degree in Mechanical Engineering or Electrical Engineering .</p><p>2 4 years of experience in tendering, proposals, or estimation.</p><p>Experience preparing technical and commercial proposals .</p><p>Candidates must be currently based in Qatar .</p><p>Preferred Qualifications</p><p>Experience within the Oil &amp; Gas sector .</p><p>Experience working on EPC or engineering projects .</p><p>Other Qualifications</p><p>Strong communication and coordination skills.</p><p>Good analytical skills.</p><p>Ability to work under pressure and meet tender submission deadlines.</p>

<p>Provide technical guidance to support the Transportation Network and Airfield Pavement Activity Management Plan (TNAP) AMP as required by the contract. This position will be in support of the Air Force Contract Augmentation Program (AFCAP), and it is located at Al Udeid Air Base (AUAB), Doha, Qatar. Essential <b>Responsibilities</b>:</p><p>• Provides management service of airfield pavements and transportation infrastructure networks to enable the safe and efficient movement of people, equipment, aircraft, and material across the installation and airfield.</p><p>• Advise and assist in a portfolio-wide view of facilities and linear infrastructure at the highest level.</p><p>• Provide technical guidance to support the Heavy Pavements Sub-AMP, Pavements/Airfield Pavements Sub-AMP duties and responsibilities.</p><p>• Responsible for an asset lifecycle management portfolio containing all Air Force-owned roads, bridges, parking lots, curbs and gutters, traffic signals, signage, marking, sidewalks, walkways, rail systems, docks, final denial barriers (FDB), FDB control systems, FDB supporting safety systems and traffic management and planning.</p><p>• This AMP Manager s subject matter expertise shall lend itself to providing the Government with recommendations on how best to invest in the assets under their purview and align its efforts under four main lines of effort: Asset Visibility, Requirements, Planning, and Performance.</p><p>• Advise and assist the Government to ensure the asset inventory reflects sufficient level of detail to enable investment decisions.</p><p>• Advise and assist with the development of the Future Years Defense Program +3 (FYDP+3) for infrastructure pavements.</p><p>• Conduct regular quality assurance (QA) reviews of data and use gap analysis to identify where Sub-AMP and subject matter experts shall collect additional data.</p><p>• Implement data standards for assets within respective portfolios and provide guidance to Sub-AMPs and the Built Infrastructure Assessment Team (BIAT) on which inventory to prioritize and advise on how often and when to conduct condition assessments.</p><p>• Support condition assessments and provide guidance to ensure relevant data has visibility and analysis.</p><p>• Work with Operations Flight shops, subject matter experts, and the Engineering Flight to advise and assist the Government on the condition assessment methodology and approach to ensure the data is adequate and the data resulting from the condition assessments are properly documented.</p><p>• Advise and assist the Government in defining and prioritizing requirements within respective activities.</p><p>• Integrate requirements from Sub-AMPs within their activity and identify target years for project development, design, and execution.</p><p>• Advise and assist on creating requirements to support future opportunities deriving from asset analysis.</p><p>• Utilize appropriate systems to identify investment requirements at facility or equivalent master-asset level to repair/sustain systems throughout their life cycle.</p><p>• Advise and assist on developing requirements which may be executed through organic Operations Flight labor or through projects managed in the Engineering Flight.</p><p>• Perform work planning, including grouping of requirements into opportunities and developing a rough cost and work estimate for them.</p><p>• Lead semi-annual AMP working groups. AMP working groups should discuss the status of asset visibility, the current risk in asset portfolios, project candidates, performance assessments of key performance indicators (KPI), a review of any completed AMP objectives, and a summary of AMP objectives to accomplish in the coming year.</p><p>• When construction impacting the TNAP AMP is completed the TNAP AMP Manager will update the Pavements Condition Index in PAVER with no more than one (1) error per update.</p><p>• Advise and assist the Government in the development of metrics and KPIs to ensure activities deliver optimal service.</p><p>Work Environment, Physical Demands, and Mental Demands:</p><p>• Able to lift, carry, and push supplies and boxes up to 50 pounds.</p><p>• Personnel should be aware of moving on short notice and under adverse conditions.</p><p><b>Other Responsibilities:</b></p><p>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Position Knowledge, Skills and Abilities Required:</b></p><ul><li>Civil Engineer Bachelor s Degree from an ABET Accredited University with at least five (5) years experience in pavement, construction, and maintenance and transportation infrastructure management.</li><li>Experience with pavement management systems is preferred.</li><li>Must have an equivalent of an Air Force minimum 5 level or equal and 5 years experience in pavement maintenance and repair, asphalt paving, concrete paving, and pavement marking.</li><li>Prior R&amp;R experience preferred.</li><li>Must be familiar with PAVER, serve as the engineering expert and liaison for the Traffic Safety Council, and work with the sub-AMP managers assigned to areas of TNAP responsibilities.</li><li>Required to complete AFIT WENG 200, WENG 400, WENG 555, WMGT 241, WMGT 331, WMGT 341, WMGT 417 required and WENG 550 desired. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date.</li><li>Must be familiar with NexGen IT and BUILDER SMS.</li><li>Ability to exercise discretion and make effective decisions. Solid communications and strong interpersonal skills a must.</li><li>Strong ability to work and lead as a member of a diverse, dynamic team.</li><li>Outstanding problem-solving skills and sound judgment.</li><li>Computer literate; can use Microsoft Office and Project, etc.</li><li>Must be a USN to fill this position.</li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance.</li><li>Possess a valid state issued driver s license or international driver s license and passport.</li><li>Prior overseas government contracting experience preferred.</li></ul>

<p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role: Site Electrical/Telecom Engineer || Underground OFC Construction || Dukhan, Qatar</p><p>Experience: Minimum 3 to 5 years of site experience in underground telecom or power cabling infrastructure.</p><p> Hands-on experience in Trenching/Ducting works</p><p> Must have direct experience executing construction works inside the DCA (Dukhan Concession Area).</p><p> Strong knowledge of civil infrastructure works related to cable routing.</p><p> Fluent in English (both spoken and written) to communicate with clients and multicultural site teams.</p><p> Valid Qatar Driving License.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Fluent in English (both spoken and written) to communicate with clients and multicultural site teams.</p><p></p></section>

<p>Principal: Qatar District Cooling Company</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

Company Description The Wellbeing Hub is a premium wellness consultancy and in-home personal training company based in Qatar, specializing in high-end residential fitness solutions. The team transforms home and tower gyms into state-of-the-art wellness spaces through bespoke gym design and carefully curated equipment sourcing. Services are tailored for real estate developers and individuals seeking convenience, exclusivity, and holistic health solutions in their own homes. The Wellbeing Hub also provides personalized training and recovery programs that integrate seamlessly into clients’ lifestyles. Applicants join a growing organization focused on elevating home-based wellness experiences in the region.<br>Job purpose Keep commercial gym equipment safe, reliable, and available. The technician inspects, maintains, diagnoses, repairs, installs, and documents cardio, strength, and functional training equipment across assigned clubs or client sites so members can train without downtime or safety risk.<br>Key responsibilities Preventive maintenance• Inspect cardio, strength, functional, and specialty equipment on a planned schedule.• Lubricate, adjust, clean, tension belts/cables, and calibrate machines to manufacturer specifications.• Keep a site-by-site PM calendar and complete checklists after every visit. Repair and diagnostics• Troubleshoot mechanical, electrical, and electronic faults (motors, drive boards, consoles, sensors, cables, pulleys, bearings, resistance systems).• Replace belts, decks, rollers, motors, consoles, cables, pins, upholstery, and other wear parts.• Decide when a machine should be locked out, repaired on site, sent for workshop repair, or recommended for replacement. Installation and moves• Uncrate, assemble, level, and commission new equipment.• Relocate or reconfigure machines during fit-outs, renovations, or club refreshes.• Test units after install and brief club staff on basic care and fault reporting. Safety and compliance• Isolate unsafe equipment immediately and tag it out of service.• Follow electrical safety, lockout/tagout, and manufacturer procedures.• Report hazards, near misses, and repeat failures to the line manager. Parts, inventory, and vendors• Maintain a practical stock of high-turnover parts and consumables.• Identify part numbers, raise purchase requests, and chase deliveries.• Coordinate warranty work and specialist support with OEMs and local suppliers. Documentation and communication• Log every inspection, repair, and parts use in the work-order / CMMS system (or paper log if no system is in place).• Update club managers on downtime, expected return-to-service, and parts lead times.• Train reception and floor staff on simple daily checks (unusual noise, error codes, loose cables). Other duties• Keep tools, the workshop, and any company vehicle clean, stocked, and roadworthy.• Support basic related tasks when needed (drink coolers, simple facility faults) if assigned.• Work occasional evenings, Fridays, or emergency call-outs to restore critical machines. <br><br>Typical equipment• Cardio: treadmills, ellipticals / cross-trainers, bikes, steppers, rowers, climbers• Strength: selectorized, plate-loaded, cable motion, functional trainers, Smith machines• Other: racks, benches, free-weight hardware, consoles and entertainment systems• Common brands in Qatar clubs and hotels: Technogym, Life Fitness, Matrix, Precor, Hammer Strength, Cybex, and similar commercial lines

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities:</p><p>•<span > </span>Technical Pre-Sales Support: Work closely with the sales team to understand client requirements for fire alarm and firefighting systems. Conduct site visits, assess existing infrastructure, and gather all necessary technical data.</p><p>•<span > </span>Solution Design &amp; Proposal Development: Design conceptual and detailed fire protection system layouts (e.g., sprinkler systems, fire suppression systems, fire alarm systems) based on project specifications, relevant codes (NFPA, QCDD), and client needs. Prepare comprehensive technical proposals, including system architecture, scope of work, and compliance statements.</p><p>•<span > </span>Cost Estimation: Prepare accurate and detailed cost estimates for materials, labor, equipment, and other associated expenses for proposed fire alarm and fire fighting projects. This involves analyzing tender documents, drawings, specifications, and obtaining competitive pricing from suppliers.</p><p>•<span > </span>Bill of Quantities (BOQ) Preparation: Develop precise BOQs that itemize all necessary components and services for the proposed fire safety solutions.</p><p>•<span > </span>Client Presentations &amp; Technical Clarifications: Present technical solutions and proposals to clients, addressing their queries and concerns. Provide technical clarifications during the bidding process and negotiations.</p><p>•<span > </span>Value Engineering &amp; Optimization: Identify opportunities for value engineering and cost optimization without compromising system performance or compliance.</p><p>•<span > </span>Supplier &amp; Vendor Coordination: Liaise with suppliers and manufacturers to gather product information, specifications, and pricing for estimation purposes.</p><p>•<span > </span>Market &amp; Regulatory Knowledge: Stay updated on the latest fire safety technologies, industry trends, and changes in local (QCDD) and international (NFPA) fire codes and regulations.</p><p>•<span > </span>Collaboration: Work effectively with design, procurement, and project execution teams to ensure a smooth transition from pre-sales to project delivery.</p><p>Key Skills:</p><p>•<span > </span>Technical Expertise: Strong theoretical and practical knowledge of various fire alarm systems (conventional, addressable, voice evacuation), fire fighting systems (sprinklers, deluge, foam, clean agent, hydrants, pumps), and emergency lighting.</p><p>•<span > </span>Estimation Proficiency: Proven experience in accurate cost estimation for fire safety projects, including material take-offs and labor cost calculations.</p><p>•<span > </span>Code &amp; Standard Compliance: In-depth understanding and practical application of NFPA codes (e.g., NFPA 13, 20, 72) and local regulations, particularly QCDD requirements.</p><p>•<span > </span>Design Software: Proficiency in CAD software (e.g., AutoCAD, Revit) for system design and layout.</p><p>•<span > </span>Analytical &amp; Problem-Solving: Excellent analytical skills to interpret complex project documents and identify optimal solutions.</p><p>•<span > </span>Communication &amp; Presentation: Strong verbal and written communication skills to articulate technical concepts clearly to diverse audiences (clients, sales team, technical staff). Ability to create and deliver compelling presentations.</p><p>•<span > </span>Commercial Acumen: Understanding of business development processes, sales strategies, and the ability to contribute to revenue generation.</p><p>•<span > </span>Attention to Detail: Meticulous approach to ensure accuracy in estimations, proposals, and compliance.</p><p>•<span > </span>Negotiation Skills: Ability to support sales in commercial discussions and negotiations.</p><p>•<span > </span>Bachelor's Degree: Bachelor’s degree in mechanical, Electrical, or Fire Engineering (or a related field) is required.</p><p><br></p><p>Qualifications</p><p>1.<span > </span>Bachelor of Civil Engineering or equivalent&nbsp;</p><p>2.<span > </span>Minimum 3+ Years experience in the relevant field</p><p>3.<span > </span>Candidates should be locally available in Qatar.</p><p>4.<span > </span>NOC must be available</p><p>5.<span > </span>Preferably Arabic speaking</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Download Requirements</p><p></p></section>

About SPIE Global Services Energy<br><br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions.<br><br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br><br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million. We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC Doha, Qatar for a :<br>Piping Engineer - Valve Specialist<br>Drive an Incident Free environment through establishing and maintaining a strong safety culture<br>Responsible for ensuring positive HSE performance by personnel, contractors and others working under the<br>guidance of the Lead Static .<br>Ensuring compliance with HSE legislation, company standards and procedures under the area of responsibility<br>to ensure employee safety, legislative compliance and responsible environmental attitude.<br>Provides safe and efficient mechanical 'first line' support on defined issues and contributes through<br>application of expertise and knowledge as part of the Static team (Piping, valves & vessels), in line with<br>organizational strategic objectives, targets and plans<br>Review Vendor offer for Piping components, specialties & valves. Provide Scope of work<br>Preparation of requisitions for quotations, TQs, technical bid evaluation, purchase specifications, and<br>review/approve vendor drawings / documents for valves.<br>Assist inspection department to approve various vendor documents / procedures like pressure test, painting,<br>welding, and packing & preservation etc.<br>Valve selections, analyze materials, trim options and operators, devise solutions to diverse actuator and valve<br>applications based on process, costs, environment & integrity issues.<br>Review/approve datasheet, vendor offer and documentation for valves, piping specialties.<br>Provide timely piping engineering support and troubleshooting assistance to other departments, including<br>giving input to project concepts and engineering review of piping designs.<br>Develop and maintain procedures and guidelines to ensure safe and consistent piping design in compliance<br>with internal guidelines, current international standards and industry practices.<br>Piping component selection work, appraise piping systems and their application to abnormal situations,<br>devise solutions to diverse design, material, environment, cost and integrity issues.<br>Assure pipe supports philosophies and standards understand applicable industry safety and integrity codes,<br>approve and confirm design audits, company operational, safety and reliability practices.<br>Provide technical and administrative support, relating to Valves and PSV's, to the site base operations;<br><br><br>Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent).<br>Relevant Work Experience: Minimum of 10 years of experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants.<br>You are fluent in English with both written and verbal communication<br>You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.- High School Diploma / Technical certificate in Discipline.<br>- Minimum 10 years recent experience in the petrochemical, refining, oil /gas exploration and/or production industries in a similar role.

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

About the role:<br>We are currently recruiting for Licensed Aircraft Engineers (B2) under Line Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer (B2), you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes:<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br>Join us as we dare to achieve what’s never been done before.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>Together, everything is possible<br>How to apply :If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

About the role:<br>We are currently recruiting for Licensed Aircraft Engineers (B1) under Line Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer (B1), you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes:<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br>Join us as we dare to achieve what’s never been done before.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>Together, everything is possible<br>How to apply :If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants.</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>