Heavy equipment mechanical engineer Jobs

Primary Purpose Of The Job<br><br>Responsible for leading Operation Readiness Disciplines Engineers, Disciplines Technicians in coordination with Qatar Energy Project Team and Contractors to ensure consistent and standardized execution of Project design, pre- commissioning, commissioning and start-up activities for Operational Area (Operations Directorate) Projects in accordance with approved Qatar Energy Procedures, Guidelines, Engineering Design, Safety & Environmental Standards/Specifications and Scope of Work to ensure that:<br><br> Operational Area Asset Owners are fully ready to assume ownership of the asset at the point of delivery/handover, and that they are able to operate and maintain that asset in a safe, reliable and sustainable manner. Operational Area (Operations Directorate) Projects are delivered much faster, at much lower cost and at the highest productivity while maintaining the highest standard in quality and HSE.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ experience in design, construction, commissioning and start-up of oil & gas processing and production facilities (Onshore/Offshore), preferably with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader.<br><br>Experience in operations, maintenance, and projects’ pre-commissioning, commissioning, start up and Hand-over activities.<br><br>Educational Qualifications<br><br>Bachelor’s degree in engineering Discipline preferably Chemical / Process / Mechanical Engineering. Chartered Engineer status or equivalent is preferable.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Requirements</span><ul><li><span>Bachelor’s degree in Civil Engineering, Mechanical Engineering, or a related discipline.</span><br></li><li><span>Minimum 9 years of relevant experience in water meter installation or related utility works..</span><br></li><li><span>Proficiency in water meter installation, operation, and maintenance.</span><br></li><li><span>Strong knowledge of water distribution systems and smart metering technologies.</span><br></li><li><span>Knowledge of Non-Revenue Water (NRW) management practices.</span><br></li><li><span>Experience in testing, commissioning, and verification of utility metering systems.</span><br></li><li><span>Ability to work in site-based environments with frequent inspections and</span><br></li><li><span>supervision.</span><br></li><li><span>Written and spoken English is essential; Arabic is preferred.</span><br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop piping designs based on project requirements, ensuring they meet safety, regulatory, and operational standards. Perform stress analysis and calculations to ensure piping systems can withstand operational conditions. Create and maintain piping specifications, including standards for materials, fittings, and fabrication processes. Develop and implement quality control procedures for piping fabrication and installation. Maintain records of design changes, material specifications, and inspection results.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Graduate in Mechanical or Civil Engineering. Minimum 7 years in piping for industrial/oil field projects.</p><p></p></section>

About the role:<br>We are currently recruiting for Licensed Aircraft Engineer (B1) under Light Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer, you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes:<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br>Join us as we dare to achieve what’s never been done before.<br>Qualifications About you:<br>To be successful in the role, you must have the following qualification and skills:Bachelor’s Degree or Equivalent with Minimum 4 years of job- related experience Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering. Holds a minimum 1 full Qatar Airways main fleet ICAO/QCAA, is must. For Internal applicant: minimum of 1 year job related aircraft certifying experience as EN.01Job Specific Skills:Sound knowledge of air legislation. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills – Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate’s skills. Ability to foster teamwork among team members.<br>About Qatar Airways Group:Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.<br>Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

About the role:<br>We are currently recruiting for Licensed Aircraft Engineer (B2) under Light Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer Level, you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes:<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br>Join us as we dare to achieve what’s never been done before. Qualifications About you:<br>To be successful in the role, you must have the following qualification and skills:Bachelor’s Degree or Equivalent with Minimum 4 years of job- related experience Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering. Holds a minimum 1 full Qatar Airways main fleet ICAO/QCAA, is must. For Internal applicant: minimum of 1 year job related aircraft certifying experience as EN.01Job Specific Skills:Sound knowledge of air legislation. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills – Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate’s skills. Ability to foster teamwork among team members.<br>About Qatar Airways Group:Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.<br>Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

The ELV Design Engineer will be responsible for end-to-end design and engineering of Extra Low Voltage (ELV) systems for building and infrastructure projects. The role involves collaborating with clients, architects, and project teams to understand requirements, developing detailed ELV designs and drawings, ensuring compliance with international and local standards, and providing technical support during installation and commissioning.<br>Duties and Responsibilities: ELV Design Engineer <br>1) Collaborate with clients, architects, and project managers to understand project requirements and objectives.2) Design Extra Low Voltage (ELV) systems, including but not limited to:a. Structured Cabling Systems (SCS)b. Data Networksc. Voice Networksd. Security Systems (CCTV, Access Control, Intrusion Detection)e. Audio-Visual Systemsf. Public Address (PA) Systemsg. Building Automation Systems (BAS)h. Fire Alarm Systems3) Develop detailed design drawings, schematics, and specifications using CAD software (e.g., Auto CAD).4) Perform site surveys and assessments to gather necessary information for design and implementation.5) Conduct technical feasibility studies and risk assessments to ensure the viability and effectiveness of proposed solutions.6) Ensure compliance with relevant industry standards, codes, and regulations (e.g., ANSI/TIA/EIA, BICSI, NFPA).7) Work closely with internal teams and external vendors to select appropriate equipment, materials, and technologies for ELV systems.8) Provide technical support and guidance to installation and commissioning teams during the implementation phase.9) Review and evaluate system performance, troubleshoot issues, and propose corrective actions as needed.10) Stay updated on emerging technologies, industry trends, and best practices in ELV system design and integration.<br>Experience: 7–9 years in ELV / Low Current systems design and engineering, preferably in a system integrator / contracting environment.<br>Qualifications Bachelor’s degree in Engineering (B. E./B. Tech) in one of the following:Electronics & Communication / Telecommunications Electrical & Electronics Professional certifications (preferred/added advantage):BICSI (e.g., RCDDVendor certifications in CCTV/Access Control, Fire Alarm, or Building Management Systems Auto CAD / BIM-related certifications

Airswift are a Global Manpower Provider specialising in the Energy, Infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.<br><br>Role<br><br>We are working with a Major Oil & Gas operator to source for Sr. Mechanical Engineer (Umbilical & Power Cable) to work for Multi-Billion Offshore Redevelopment Project consist of Greenfield & Brownfield scope). This is a long-term contract role working on a residential basis 5-days per week / 8-9 hours per day. Please see details below:<br><br>Title: Sr. Mechanical Engineer (Umbilical & Power Cable)<br><br>Start Date: Negotiable (typically within 1 month notice)<br><br>Duration: 36 months (potential for extension)<br><br>Location: Doha HQ with site visits<br><br>Working Schedule: 5-days per week / 8-9 hours per day<br><br>Qualification<br><br>Bachelor's degree in Mechanical Engineering Chartered Engineer/ Professional Engineer status or equivalent is preferable <br><br>Experience<br><br>Have minimum 12 years relevant post graduate experience in Oil & Gas Industry, of which 10 years should be related to subsea umbilical and cable design and engineering. Must be an Expert in design & engineering of subsea umbilicals. Have worked in at least 2 major offshore EPIC (Engineering, Procurement, Installation & Commissioning) Oil & Gas projects with direct responsibility for umbilical and Power cables package delivery. Have PMT / PMC experience and able to manage EPIC Contractors / Vendors in discipline related activities for large-scale Projects. Have extensive experience in working with relevant umbilical design codes and standards (ISO, API, Shell DEPs). Have extensive experience in umbilical manufacturing and testing with proven ability in reviewing documents with respect to quality and safety and compliance to project design basis and standards. Able to make recommendations for approval or rejection of technical deviations/Change Requests. Able to resolve technical challenges and liaison with other relevant disciplines and external stakeholders. Previous work experience for an umbilical manufacturer is preferable. Have experience in subsea umbilical crossing design, loadout, installation, and J-tube pulling operations. Have experience in power cable crossing design, loadout, installation, shore approach, and shore pulling analysis. Experience in and understanding of subsea umbilical pre-commissioning / commissioning operations<br><br>Primary Duties And Responsibilities<br><br>Provide technical design and engineering services in subsea umbilical and power cable Engineering (Offshore) for all assigned engineering projects. Achieving the technical quality of work in accordance with Company procedures, whilst considering quality, schedule, cost and HSE. Conduct Umbilical and Power Cable Engineering (Offshore) activities of in-house site surveys for projects, from initial concept definition phase through to; engineering studies, FEED, detailed design and commissioning. Ensure the required Company technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in workscopes and whilst conducting Pipeline Engineering (Offshore) activities. Review technical deviations and variations to approved guidelines, codes, standards and practices. Support Engineering Department to review, update and apply Company standards and amendments to external standards. Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements. Co-ordinate engineering designs, develop and review multi-disciplinary work- scopes for projects and other engineering activities. Ensure that the work-scope is comprehensive and clear. Develop offshore subsea facilities engineering scope of works and deliverables list for FEED and detail engineering stage. Review and approve method statements developed by contracted organisations for scope compliance. Liaise with contracted organisations to resolve technical issues. Develop, update and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery. Conduct evaluation of technical bid packages for scope compliance. To review and comment on Package Vendor documents. Review and evaluate the Contract Changes/Variation to approved guidelines and practices. Act as the focal point for technical matters and take a lead role on behalf of Company on matters associated with subsea facilities. Work seamlessly with Company’s project team, to support the execution of subsea facilities, tie ins and systems integrations. Ensure the testing program, plans and procedures for all Subsea facilities deliver technical integrity assurance of all system interfaces prior to shipment for installation. Ensure interfaces between project Contractors and other stake holders are effectively managed. These include Operations & Maintenance department, Topsides and Drilling Contractors. Provide onshore and offshore technical support during onshore and offshore project construction, commissioning and startup activities. Provide coaching, mentoring and training to less experienced Subsea Engineers in the wider organisation.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Key Responsibilities<br><br>Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment. A thorough knowledge of the regulations, codes and standards and a good understanding of onshore and offshore engineering practices applicable to topsides/plant layout and piping design for oil and gas facilities. Extensive current design experience is required in piping engineering, piping stress, pipe supports, topsides & onshore plant equipment layouts and detailed piping design, all gained with notable design contractors and/or oil/gas companies within the industry. Extensive knowledge of piping materials to guide staff in the preparation of piping, valve and SP Item specifications and subsequently ensure purchase to required standards. Experience in brown fields & asset services type project / contracts. Excellent technical and practical engineering skills and able to consistently deliver quality, accurate and timely work to Worley and its clients. An excellent knowledge of the fundamental requirements of the piping discipline, and the basic requirements of other disciplines. An excellent knowledge of applicable local and international standards and statutory and regulatory requirements. Competent in the use of relevant piping discipline specific software.<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being.healthy and safe workplaces and activities.<br>Industry Specific Experience<br><br>Extensive work experience at a senior level within the Oil & Gas industry in both Onshore and Offshore projects. Design & Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers. Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams.<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br>Full-Time bachelor’s degree in mechanical engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<p><strong>Principal:</strong> Qatar District Cooling Company<br><strong>Country:</strong> Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).<br>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)<br>3. Tank (Structures, valves and fittings, air vents)<br>4. Air handling Units (Filter, ducting, AHU Housing)<br>5. Filtration system (Filters, housings, pipe and fittings)<br>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system<br>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Key Responsibilities<br><br>Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Identifies software necessary to enable piping group to function effectively. Provide specialist technical support, supervision and advice to the discipline and project teams; participate in peer reviews; Ensures recognised onshore & offshore engineering practices applicable to piping design and topside/plant layout are adopted within the discipline. Knows the project and discipline scope/cost/time requirements, ensures the team to meets the expectations, and liaises with other disciplines to ensure project success. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, drives squad checking, recommends improvements, and takes action where required. Collaborates with project team in review of project documentation such as proposals, estimates, budgets and schedules. Leads weekly piping meetings, reviews progress reports and required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Establish a list of discipline deliverables. Controls, monitors and progresses these deliverables to an agreed schedule. Lead the production of detailed designs and drawings, specifications, data, calculations and reports .<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being.healthy and safe workplaces and activities.<br>Industry Specific Experience<br><br>Extensive Piping Engineering experience at a senior level within the Oil & Gas industry in both Onshore and Offshore projects. Design & Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers. Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams. Expertise on stress (unbalanced / transient conditions), complicated hot-tapping plugging of C3/C4 services, Inconel 625 materials specs and datasheets<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br>Full-Time bachelor’s degree in mechanical engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Senior Corrosion Engineer - QATAR<br><br>Part A: Job Specification<br><br>Job Purpose<br><br>Provides broad technical expertise in corrosion engineering ensuring facilities are efficiently monitored and controlled to meet the Company’s production objectives in a cost-effective manner while maintaining the highest level of integrity, safety, and environmental compliance. Reviews design specification requirements for new projects and modifications.<br><br>f<br><br>Reporting and Relationships<br><br>Reports to Lead of Corrosion or Corrosion Engineering Specialist.<br><br>Internal<br><br>Frequent Contact with Operations, Maintenance, Engineering, Safety, Subsurface and Supply departments.<br><br>External<br><br>Frequent contact with Shareholders, Corrosion Consultants and external Laboratories and Research Institutes. Occasional contact with Shareholders. Frequent contact with Corrosion Service Providers and with specialized laboratories for development of SOW for specific investigations, like failure analysis, corrosion simulations, chemicals qualifications, materials sour service qualifications.<br><br>Job Context & Major Challenge(s)<br><br>Exercises judgment when planning corrosion control and monitoring programs, interpreting survey results, and recommending corrosion mitigation measures. Work requires analytical, interpretative, and constructive thinking, with a significant degree of evaluative judgment. Work is subject to review and direction by direct supervisor, Head of Corrosion and QA/QC & Corrosion Division Manager. Works within established structures, procedures, engineering standards and methodologies developed and implemented by the Head of Corrosion and QA/QC & Corrosion Division Manager. Addresses complex discipline specific related problems and issues. Works within established Safety umbrella, structures, procedures, engineering standards and methodologies.<br><br>Financial Dimension<br><br>As defined for this job level in the Delegation of Authority and/or approved budget.<br><br>Generic Accountabilities – All Employees<br><br>Safety Health & Environment<br><br>Ensure all activities are undertaken in compliance with Company Safety, Health and Environment and Quality policies, regulations and standards.<br><br>Qatarization Program<br><br>Contribute to the development of Qatari employees. This accountability is a condition of employment for expatriate employees.<br><br>Firewall Compliance<br><br>Ensure all activities undertaken comply with anti-trust and competition laws and the Company firewall policies and procedures.<br><br>Key Job Accountabilities<br><br> Reviews material and design requirements of new projects and modifications including the design requirement and monitoring criteria for all the Corrosion Programs like Cathodic Protection, protective Coating & Lining, Chemical Inhibition and Corrosion Monitoring Systems and submits recommendations to supervisor. Conducts corrosion monitoring and prevention activities and corrosion investigation. Includes monitoring Integrity Operating Windows affecting corrosion and equipment life and advising Operational suitability. Develop SOW and Participate in review of the test reports for technical evaluation of Corrosion related Contracts like Chemical selection for corrosion prevention in pipelines and process plants. Develops painting/coating requirements for pipelines, structures, equipment and tanks and gives recommendations to supervisor about selection of systems and procedures for proper quality control. Inspects paint condition and works with inspectors to conduct quality control checks for painting jobs. Provide direct and indirect advice in the field of corrosion engineering to multiple parties or interfacing with or acting as the technical representative with outside organizations (i.e., shareholders, vendors, other corrosion consultants). Develop new and maintain existing corrosion and integrity related procedures, processes, standards, and best practices as needed in order to maintain compliance with regulatory standards or improve the effectiveness and efficiency of corrosion mitigation. Assess regional corrosion control programs to determine company wide consistency to policies, practices and procedures. Develop, implement, and steward corrosion engineering programs for company facilities including offshore platforms, pipelines, onshore process facilities, condensate refinery, storage facilities, export and loading facilities and ensure that company utilizes cost effective corrosion control and monitoring equipment. Review/analyse corrosion engineering reports, test results, failure investigations etc. and provide recommendations for corrective measures or actions to restore equipment functionality, improve equipment performance, or to extend its operating life. Perform the Risk analysis for Corrosion related assessments. Drive strategic technical innovation and provide expertise and guidance in area of corrosion control and mitigation methods including chemical treatment, cathodic protection, metallic and non-metallic material selection, protective coatings and linings, corrosive process conditions, etc. Raise PMCRs for Corrosion Studies, or Cathodic Protection and Coatings & Lining changes.<br><br>Part B: Person Specification – Minimum Requirements<br><br>Qualifications<br><br>Bachelor’s degree in Engineering (Chemical, Metallurgical, Materials).<br><br>Knowledge and/or Experience<br><br>6 years’ experience in corrosion control and mitigation within the oil/gas production industry. Skilled and Competent in chemical inhibition, corrosion monitoring, material selection, degradation mechanisms, and failure analysis for sour service and utilities facilities, protective coatings, corrosion monitoring, chemical inhibition and cathodic protection. Experience in corrosion systems and in plant facilities with sour feed gas and plant exposure to a marine climate, including Utilities. Working knowledge of national and local codes, International Codes and Standards, statutory regulations, NDT and inspection techniques.<br><br>Technical and Business Skills<br><br>Proficient written and spoken English. Computer literate. Well-developed interpersonal skills and ability to communicate at all levels with the Organisation. Work requires analytical, interpretative and constructive thinking, with a significant degree of evaluative judgment, as well as influential leadership behaviours.

Company Description Isteel Engineering Trading serves both the Qatari and international markets, specializing in high-quality steel structures and pre-engineered buildings. The company’s headquarters and primary manufacturing facility are located in Doha’s New Industrial Area, providing convenient access to key industrial and commercial hubs. The plant is equipped with advanced machinery and is designed to support efficient, large-scale fabrication operations. Isteel Engineering Trading can produce up to 1,500 metric tons of structural steel and pre-engineered components each month, including painted steel frames, galvanized members, and panels with accessories. This robust capacity enables the company to support complex projects and offer reliable, timely delivery to clients. Role Description The Fabrication Engineer role is a full-time, on-site position based at the Doha, Qatar manufacturing facility. The Fabrication Engineer will oversee the fabrication of structural steel and pre-engineered components, including frames, galvanized members, and panels, ensuring adherence to technical drawings, quality standards, and safety regulations. Day-to-day responsibilities include reviewing engineering designs, preparing fabrication plans, coordinating with production teams, monitoring workflow, and resolving technical issues on the shop floor. The role involves conducting inspections, verifying measurements and tolerances, optimizing fabrication processes, and supporting continuous improvement initiatives to increase efficiency and reduce waste. The Fabrication Engineer will collaborate with project managers, quality control staff, and maintenance teams to meet project schedules and maintain reliable operation of fabrication machinery. Qualifications Strong knowledge of structural steel and pre-engineered building fabrication, including frames, galvanized members, and panel systems. Proficiency in reading and interpreting engineering drawings, fabrication detailing, and workshop documentation. Experience with fabrication processes such as cutting, welding, forming, and assembly, and familiarity with related machinery and tools. Understanding of quality control standards, inspection methods, and industry codes relevant to steel fabrication. Knowledge of workplace safety practices and regulations in industrial and fabrication environments. Ability to plan and coordinate production activities, prioritize tasks, and meet fabrication timelines. Strong analytical and problem-solving skills for resolving technical and process-related issues on the shop floor. Effective communication and collaboration skills for working with engineering, production, quality, and management teams. Bachelor’s degree in Mechanical Engineering, Civil Engineering, Industrial Engineering, or a related field; relevant technical diploma with strong experience may be considered. Previous experience in steel fabrication or pre-engineered building manufacturing, preferably in a high-capacity plant environment. Comfort working on-site in a manufacturing setting and ability to adapt to fast-paced production requirements.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Primary Objectives<br><br>Ensures team member adherence to generally accepted engineering and design practices, regulatory requirements, and customer specifications. Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Supports checking, peer reviews, and incorporation of comments and findings. Knows the project and discipline scope/cost/time requirements, assists the team to meet expectations, and coordinates with other disciplines to ensure project success. Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Job Specific Knowledge<br><br>Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment. Specialized expertise of the regulations, codes and standards and a good understanding of onshore and offshore engineering practices applicable to topsides/plant layout and piping design for oil and gas facilities. Extensive current design experience is required in piping engineering, piping stress, pipe supports, topsides & onshore plant equipment layouts and detailed piping design, all gained with notable design contractors and/or oil/gas companies within the industry. Specialized expertise of piping materials to guide staff in the preparation of piping, valve and SP Item specifications and subsequently ensure purchase to required standards. Ensure recognised onshore & offshore engineering practices applicable to piping design and topside/plant layout are adopted.<br><br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe working practices. Understand and follow OH&S procedures. Promoting health, safety and environmental awareness.<br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Mechanical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be advantage.<br><br>IT Skills<br><br>Microsoft Office – Word, Excel, Power point.3D Review Software: Navisworks, SPR.<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being;healthy and safe workplaces and activities; and Continuously improve Worley health, safety and environmental performance. Identify and report work hazards and incidents.<br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Site Manager<br>Manage and supervise subcontracted site construction activities for a Desalination/RO Plant Project, including mechanical, piping, equipment installation, and GRE/GRP works, ensuring compliance with project specifications, quality, HSE, and schedule requirements while coordinating with the main contractor and client.<br>1) Bachelor's Degree in Mechanical Engineering2) Minimum 10 years of GCC construction experience3) Must have strong experience in oil & gas, desalination/RO plant construction, mechanical and piping works, with proven experience managing site manpower and subcontracted construction activities

Bachelor’s degree in Civil Engineering, Mechanical Engineering, or a related discipline. Minimum 9 years of relevant experience in water meter installation or related utility works.. Proficiency in water meter installation, operation, and maintenance. Strong knowledge of water distribution systems and smart metering technologies. Knowledge of Non-Revenue Water (NRW) management practices. Experience in testing, commissioning, and verification of utility metering systems. Ability to work in site-based environments with frequent inspections andsupervision. Written and spoken English is essential; Arabic is preferred.

Bachelor’s degree in Civil Engineering, Mechanical Engineering, or a related discipline. Minimum 9 years of relevant experience in water meter installation or related utility works.. Proficiency in water meter installation, operation, and maintenance. Strong knowledge of water distribution systems and smart metering technologies. Knowledge of Non-Revenue Water (NRW) management practices. Experience in testing, commissioning, and verification of utility metering systems. Ability to work in site-based environments with frequent inspections andsupervision. Written and spoken English is essential; Arabic is preferred.

Primary Purpose Of The Job<br><br>Responsible for leading VOR Disciplines Engineers, Disciplines Technicians in coordination with Qatar Energy Project Team and Contractors to ensure consistent and standardized execution of Project design, pre- commissioning, commissioning and start-up activities for Operational Area (VO) Projects in accordance with approved Qatar Energy Procedures, Guidelines, Engineering Design, Safety & Environmental Standards/Specifications and Scope of Work to ensure that:<br><br>Operational Area Asset Owners are fully ready to assume ownership of the asset at the point of delivery/handover, and that they are able to operate and maintain that asset in a safe, reliable and sustainable manner.<br><br>Operational Area (VO) Projects are delivered much faster, at much lower cost and at the highest productivity while maintaining the highest standard in quality and HSE.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ experience in design, construction, commissioning and start-up of oil & gas processing and production facilities (Onshore/Offshore), preferably with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader. Experience in operations, maintenance, and projects’ pre-commissioning, commissioning, start up and Hand-over activities. Excellent interpersonal, communication and leadership skills. Relevant technical expertise. Multi-discipline engineering exposure with trouble-shooting and problem solving skills. Good IT and analytical skills with the ability to work well under pressure.<br><br>Educational Qualifications<br><br>Bachelor’s degree in engineering Discipline preferably Chemical / Process / Mechanical Engineering. Chartered Engineer status or equivalent is preferable.