Irrigation Technician Jobs - Doha Qatar
450 Jobs Found
Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Support Expansion Project Mechanical activities for pre-commissioning, commissioning, preservation and start-up tasks and conduct Mechanical field maintenance activities safely, including preventive, predictive and breakdown maintenance to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities). Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Perform preventive and corrective maintenance work on field Mechanical equipment as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of Mechanical field issues, as directed and guided by Foreman/Supervisor and issues timely reports. Review the Piping & Instrument Diagram and Drawings (P&IDs,) loop drawings, hook-up drawings, Mechanical Index, Mechanical datasheets, logic diagrams and other documents required to tackle issues related to Mechanical field. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in Regular Toolbox meeting with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe and observation cards Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas or Petrochemical industry Technical and Business Skills Extensive experience in the operation, maintenance and condition monitoring of Mechanical equipment eg: turbines, pumps, compressors, valves, exchangers, vessels and associated equipment. Good written and oral communication skills in English. Good adaptability to multinational environment, with wide exposure to various cultures and customs. Computer literate with basic knowledge in MS Office software
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>
<p>JOB PURPOSE / OBJECTIVE
Lead the fabrication team and provide necessary support to operation and maintenance team for safe and reliable plant operation. PRV/Valve overhauling and testing. Pressure testing. Hose inspection and Shop Management.
KEY ACCOUNTABILITIES
People Management
Monitor the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures.
Ensure Direct Hires /Baseload / Call-off Contractors comply with all company policies, procedures, Standard Maintenance Procedures, and Daily Instructions.
Maintain good communications between Supervisor and Production/Technical personnel.
Provide professional Leadership/direction to Technicians to complete the tasks with safety and quality.
Assist in certification process of workers assigned through training department.
Routine Duties
Perform PM of all equipment’s and tools and bring any abnormalities to the attention of Supervisor immediately and take necessary corrective actions.
Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations to repair parts that arrive in Valve shop.
Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to Valve shop.?
Ensure that all PRV maintenance/testing are performed in compliance with the ERG recommendations/policies.
Manage and maintain the workshop PRD testing and lapping device equipment.
Ensure that the technicians are qualified to perform the assigned tasks.
Ensure the right spare parts are used for any job.
Ensure that all hydro testing/pneumatic testing are performed as per the procedures and in compliance with the ERG recommendations.
Maintain proper records of pressure testing tasks.
Role model for safe behaviour and takes initiative to look for areas for improvement and implementing solutions in workshop.?
Coordinate with workshop supervisor in providing specifications, SOW etc. & assist in technical evaluations related to workshop activities.
Must use SAP functionality to acknowledge and execute scheduled jobs.
KEY ACCOUNTABILITIES
Support emergency planned SD’s and TA related to valve shop in workshop activities.
Should be able to develop, review / revise procedures related to Valve Shop activities.
Take part in Internal/External & field audits as assigned and to complete audit action items before due dates.
Support in achieving the department metrics.
Ability to make necessary adjustments with minimum of Supervision, trouble shoot equipment problems, recommend solutions, resolve root cause, record/report findings.
Provide necessary support to Workshop Supervisor for smooth functioning of tool crib and Machine shop.
Issue Permit in and around Workshop area under workshop ownership.
Maintain good housekeeping and order in the workshop.
Policies, Systems, Processes and Procedures
Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency.
Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner.
Quality, Health, Security, Safety and Environment
Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services.
Reporting
Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies and standards.
Qatarization
Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>KEY ACCOUNTABILITIES
QUALIFICATIONS & EXPERIENCE
Education
Required: Diploma in Engineering.
Preferred:?Bachelor’s Degree in Engineering.
Experience
Required: 5-7 years of experience in the Petrochemical Industry
Preferred: Experience in the Oil & Gas Industry.
Other Job Specific Requirements and/or Vocational Accreditations
Working knowledge of P&ID and Isometric Drawing Interpretation
Working knowledge of Gas Cutting / Cylinder handling / Cutting Set Preparation
Working knowledge of Grinding / drilling / hammering
Working knowledge of Piping & piping supports- fabrication.
Working knowledge of Plate bending / rolling / shearing
Working knowledge of SMAW, TIG, MIG, SPOT welding
Working knowledge of Welding electrode identification / baking / storage
Working knowledge of Pneumatic tools and hand tools / Overhead cranes / Lifting Tools and Tackles
Hold welder certificate on welding procedures in GAS, ARC, MIG and TIG welding as per relevant ASME. BS, API codes.
Languages
Required?(Language / Level4): English - working knowledge.
Preferred?(Language / Level4): Arabic- working knowledge
WORKING RELATIONSHIPS
Internal
Maintenance Department, Technical Department, HSE Departments, ERG
External
Subcontractors</p>
<p>JOB PURPOSE / OBJECTIVE
Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.??
KEY ACCOUNTABILITIES
Routine Duties
Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent
Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares.
Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs).
Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment.
Ensure that the spares parts used are maintained and available.?
Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical.
Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site.
Takes initiative to identify and implement areas for improvement in HVAC & Lighting.
Support emergency planned SD’s and TA related maintenance activities.
Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.?
Review preventive / Corrective maintenance (PM/CM) checklists as required.
Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner.
Identify spare parts requirements / material required for equipment overhauling / repairs.
Use SAP functionality to plan and execute the scheduled jobs.
Take part in Internal/External & field audits as assigned and to complete audit action items before due dates.
Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc.
Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required.
Conduct daily toolbox meetings as required.?
?
4.2 KEY ACCOUNTABILITIES
Policies, Systems, Processes and Procedures
Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.
Quality, Health, Security, Safety and Environment
Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services.
Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars.
Adhere to and follow all company safety policies, procedures, and Tenets of Operation.
Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents.
Understand the Q-Safe process and actively participates in accordance with expectations.
Actively Participate toolbox meetings and MSCM meetings as required.
Reporting
Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards.
Follow up metrics for employee safety performance and to achieve departmental KPI.
Qatarization
Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE
Education
Required: 2 years Diploma of relevant field.
Preferred: Bachelor’s degree in Engineering or relevant Technical degree.
Experience
Required: 3-5 years of experience in HVAC.
Preferred: Experience in Petrochemicals Industry
Languages
Required: English- proficient.
Preferred?:Arabic- working knowledge
WORKING RELATIONSHIPS
Internal
Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group
External
Vendors, Contractors, and Subcontractors</p>
<p>JOB PURPOSE / OBJECTIVE
Provide quality technical support in welding and fabrication / Shop Management. Ensure consistent quality of work by implementing quality control standards. Manage of materials, spare parts. Ensuring proper maintenance and calibration of workshop equipment for optimal performance and safety.
KEY ACCOUNTABILITIES
People Management
Monitor the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures.
Ensure Direct Hires /Baseload / Call-off Contractors comply with all company policies, procedures, Standard Maintenance Procedures, and Daily Instructions.
Maintain good communications between Supervisor and Production/Technical personnel.
Provide professional Leadership/direction to Technicians to complete the tasks with safety and quality.
Assist in certification process of workers assigned through training department.
Routine Duties
Perform PM of all equipment’s & tools and bring any abnormalities to the attention of Supervisor immediately and take necessary corrective actions.
Carries out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations to repair parts that arrive in Valve shop.
Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to Valve shop.?
Personally perform the cutting/welding tasks and demonstrate practical knowledge and expertise.
Ability to carry out soldering and brazing jobs.
Must have knowledge of codes and standards related to piping materials & fittings.
Carry out all assessment of job plan including JSA, review and knowledge of isometric drawings, P&IDs, understands recommendations to perform the job in workshop/ Field.
Ensure that all Welding / Fabrication activities are performed in compliance with the ERG recommendations/policies.
Ensure proper welding electrodes are used by all welders and ensure the electrodes are preserved properly.
Ensure the weld joints are properly prepared and proper procedure is followed by all fabricators/welders!
Ensure proper materials are used by all fabricators and welders.
Ensure all welders are qualified and the quality inspection requirements of all jobs are fulfilled.
Ensure the fabrication and welding jobs are performed with good workmanship.
Ensure availability of welding consumables and PPEs and coordinate with Supervisor/planner to avoid shortage.
Coordinate with workshop supervisor in providing specifications, SOW etc. & assist in technical evaluations related to workshop activities.
Must use SAP functionality to acknowledge and execute scheduled jobs.
KEY ACCOUNTABILITIES
Support emergency planned SD’s and TA related to valve shop in workshop activities.
Should be able to develop, review / revise procedures related to Valve Shop activities.
Take part in Internal/External & field audits as assigned and to complete audit action items before due dates.
Support in achieving the department metrics.
Perform equipment PM/Inspection in a timely manner.
Ability to make necessary adjustments with minimum of Supervision, trouble shoot equipment problems, recommend solutions, resolve root cause, record/report findings.
Shop Management - Provide necessary support to Workshop Supervisor for smooth functioning Fabrication Shop.
Issue Permit in and around Workshop area under workshop ownership.
Maintain good housekeeping and order in the workshop.
Policies, Systems, Processes & Procedures
Contribute to the identification of opportunities for the continuous improvement of systems, processes, and practices in order to increase productivity and operational efficiency.
Implement all relevant Section’s policies, processes, procedures, and instructions so that work is carried out in a controlled and consistent manner.
Quality, Health, Security, Safety and Environment
Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services.
Reporting
Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards.
Qatarization
Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE
Education
Required?(Qualification1 / Discipline: Diploma in Engineering.
Preferred?(Qualification1 / Discipline): -
Experience
Required?(Years2 / Job Level3 / Industry): 5-7 years of experience in the Petrochemical Industry
Preferred?(Years2 / Job Level3 / Industry): Experience in the Petrochemical Industry
Other Job Specific Requirements and/or Vocational Accreditations
Working knowledge of P&ID and Isometric Drawing Interpretation
Working knowledge of Gas Cutting / Cylinder handling / Cutting Set Preparation
Working knowledge of Grinding / drilling / hammering
Working knowledge of Piping & piping supports- fabrication.
Working knowledge of Plate bending / rolling / shearing
Working knowledge of SMAW, TIG, MIG, SPOT welding
Working knowledge of Welding electrode identification / baking / storage
Working knowledge of Pneumatic tools and hand tools / Overhead cranes / Lifting Tools and Tackles
Hold welder certificate on welding procedures in GAS, ARC, MIG and TIG welding as per relevant ASME.
Languages
Required?(Language / Level4): English - working knowledge.
Preferred?(Language / Level4): -
WORKING RELATIONSHIPS
Internal
Maintenance Department, Technical Department, HSE Departments, ERG
External
Subcontractors</p>
<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment
• Troubleshoot and diagnose electrical and mechanical faults
• Plan and schedule maintenance activities using SAP systems
• Conduct daily toolbox meetings and ensure HSE compliance
• Act as Designated Site Representative (DSR) for contractors
• Implement maintenance checklists and standard procedures
• Manage equipment spare parts and inventory
• Support emergency shutdowns and planned maintenance
• Prepare maintenance reports and documentation
• Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration
• 3-5 years HVAC maintenance experience
• Petrochemical/oil & gas industry experience preferred
• SAP or CMMS knowledge
• BOSIET, H2S, Fire Watch certifications</p>
Job Description <div> <p>We are currently looking Senior Technical Support Consultant for our Qatar operations with the following terms & conditions.<br>
Skills required:<br>
Should have experience in SCCM,Azure,M365,EUC along with Patch management<br>
Joining time frame: 2 weeks (maximum 1 month)<br>
<br>
</p></div>
<p><b>Qualifications:</b></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p><b>Additional Qualifications:</b></p><p> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS’s and PDN’s.</p><p> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p> Provide tuning for controls and equipment.</p><p> Test equipment and controls after maintenance has been done.</p><p> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool’s standards.</p><p> May provide assistance to control engineer in design/drawings of modifications</p><p><strong>Desired Candidate Profile</strong></p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Under general supervision, leads a crew in providing a wide range of slickline services in a geographic area. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction. Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose. Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job. Performs all aspects of the job in compliance with HMS processes. Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Performs onsite emergency unit/equipment maintenance as needed. Demonstrates knowledge of pre and post-job product and service activities (employee&aposs ongoing participation in these pre and post-job processes will vary by location). Properly maintains assigned equipment and ensures compliance with safety regulations and procedures. Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination. Trains service operators and operator assistants in areas of expertise. Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations. Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor. Promotes and takes an active part in the quality improvement process. Develops his/her knowledge and skills to be able to run the most complex, or complete range of, slickline services under the most challenging conditions. Develops mentoring and competency assessor skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>
<p>JOB PURPOSE / OBJECTIVE
Provide quality technical support in welding and fabrication / Shop Management. Ensure consistent quality of work by implementing quality control standards. Manage of materials, spare parts. Ensuring proper maintenance and calibration of workshop equipment for optimal performance and safety.
KEY ACCOUNTABILITIES
People Management
Monitor the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures.
Ensure Direct Hires /Baseload / Call-off Contractors comply with all company policies, procedures, Standard Maintenance Procedures, and Daily Instructions.
Maintain good communications between Supervisor and Production/Technical personnel.
Provide professional Leadership/direction to Technicians to complete the tasks with safety and quality.
Assist in certification process of workers assigned through training department.
Routine Duties
Perform PM of all equipment’s & tools and bring any abnormalities to the attention of Supervisor immediately and take necessary corrective actions.
Carries out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations to repair parts that arrive in Valve shop.
Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to Valve shop.?
Personally perform the cutting/welding tasks and demonstrate practical knowledge and expertise.
Ability to carry out soldering and brazing jobs.
Must have knowledge of codes and standards related to piping materials & fittings.
Carry out all assessment of job plan including JSA, review and knowledge of isometric drawings, P&IDs, understands recommendations to perform the job in workshop/ Field.
Ensure that all Welding / Fabrication activities are performed in compliance with the ERG recommendations/policies.
Ensure proper welding electrodes are used by all welders and ensure the electrodes are preserved properly.
Ensure the weld joints are properly prepared and proper procedure is followed by all fabricators/welders!
Ensure proper materials are used by all fabricators and welders.
Ensure all welders are qualified and the quality inspection requirements of all jobs are fulfilled.
Ensure the fabrication and welding jobs are performed with good workmanship.
Ensure availability of welding consumables and PPEs and coordinate with Supervisor/planner to avoid shortage.
Coordinate with workshop supervisor in providing specifications, SOW etc. & assist in technical evaluations related to workshop activities.
Must use SAP functionality to acknowledge and execute scheduled jobs.
KEY ACCOUNTABILITIES
Support emergency planned SD’s and TA related to valve shop in workshop activities.
Should be able to develop, review / revise procedures related to Valve Shop activities.
Take part in Internal/External & field audits as assigned and to complete audit action items before due dates.
Support in achieving the department metrics.
Perform equipment PM/Inspection in a timely manner.
Ability to make necessary adjustments with minimum of Supervision, trouble shoot equipment problems, recommend solutions, resolve root cause, record/report findings.
Shop Management - Provide necessary support to Workshop Supervisor for smooth functioning Fabrication Shop.
Issue Permit in and around Workshop area under workshop ownership.
Maintain good housekeeping and order in the workshop.
Policies, Systems, Processes & Procedures
Contribute to the identification of opportunities for the continuous improvement of systems, processes, and practices in order to increase productivity and operational efficiency.
Implement all relevant Section’s policies, processes, procedures, and instructions so that work is carried out in a controlled and consistent manner.
Quality, Health, Security, Safety and Environment
Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services.
Reporting
Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards.
Qatarization
Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE
Education
Required?(Qualification1 / Discipline: Diploma in Engineering.
Preferred?(Qualification1 / Discipline): -
Experience
Required?(Years2 / Job Level3 / Industry): 5-7 years of experience in the Petrochemical Industry
Preferred?(Years2 / Job Level3 / Industry): Experience in the Petrochemical Industry
Other Job Specific Requirements and/or Vocational Accreditations
Working knowledge of P&ID and Isometric Drawing Interpretation
Working knowledge of Gas Cutting / Cylinder handling / Cutting Set Preparation
Working knowledge of Grinding / drilling / hammering
Working knowledge of Piping & piping supports- fabrication.
Working knowledge of Plate bending / rolling / shearing
Working knowledge of SMAW, TIG, MIG, SPOT welding
Working knowledge of Welding electrode identification / baking / storage
Working knowledge of Pneumatic tools and hand tools / Overhead cranes / Lifting Tools and Tackles
Hold welder certificate on welding procedures in GAS, ARC, MIG and TIG welding as per relevant ASME.
Languages
Required?(Language / Level4): English - working knowledge.
Preferred?(Language / Level4): -
WORKING RELATIONSHIPS
Internal
Maintenance Department, Technical Department, HSE Departments, ERG
External
Subcontractors</p>
Company Description INNOVIZ SYSTEMS is a leading ELV (Extra Low Voltage) system integrator and total solution provider in Qatar, specializing in the design, supply, installation, testing, commissioning, and maintenance of ELV systems. Based in Qatar, the company has successfully delivered numerous projects and continues to expand operations across the region to meet growing market demands. INNOVIZ SYSTEMS offers end-to-end ELV services, including after-sales support, to ensure reliable and efficient system performance for clients. The organization is staffed by qualified employees with solid experience in all ELV system solutions, providing a professional environment for technical growth. Team members benefit from exposure to diverse projects and advanced technologies in the ELV sector. Role Description The ELV Technicians role is a full-time, on-site position based in Doha. The technician will be responsible for installing, configuring, testing, and commissioning ELV systems such as CCTV, access control, fire alarm, public address, and structured cabling. Daily tasks include reading and interpreting technical drawings, performing cable termination, conducting system troubleshooting, and ensuring compliance with project specifications and safety standards. The role involves coordinating with engineers and project supervisors, preparing basic installation reports, and supporting preventive and corrective maintenance activities. ELV Technicians are expected to maintain tools and equipment, follow company procedures, and contribute to timely project completion. Qualifications Technical skills in ELV systems, including installation, configuration, testing, and commissioning of CCTV, access control, fire alarm, and related systems. Ability to read and interpret technical drawings, wiring diagrams, and project documentation, with strong attention to detail. Experience in troubleshooting, fault diagnosis, and repairs for ELV equipment and cabling infrastructure. Candidate should have valid Qatar Driving License. Knowledge of basic electrical and low-voltage safety practices, standards, and regulatory requirements. Proficiency in using hand tools, test instruments, and measurement devices relevant to ELV installation and maintenance. Good communication and teamwork skills, with the ability to coordinate effectively with engineers, supervisors, and site teams. Minimum diploma or technical certificate in Electrical, Electronics, Telecommunications, or a related field; relevant ELV certifications are an advantage. Previous experience in ELV projects in Qatar or the GCC region is preferred, with familiarity in local codes and client requirements. Ability to work on-site in Doha, adapt to project schedules, and perform tasks in both indoor and outdoor environments. Preferred Indian Candidates with Local Transfer ( valid Qatar ID Candidate with NOC)
<p>JOB PURPOSE / OBJECTIVE
Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.??
KEY ACCOUNTABILITIES
Routine Duties
Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent
Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares.
Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs).
Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment.
Ensure that the spares parts used are maintained and available.?
Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical.
Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site.
Takes initiative to identify and implement areas for improvement in HVAC & Lighting.
Support emergency planned SD’s and TA related maintenance activities.
Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.?
Review preventive / Corrective maintenance (PM/CM) checklists as required.
Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner.
Identify spare parts requirements / material required for equipment overhauling / repairs.
Use SAP functionality to plan and execute the scheduled jobs.
Take part in Internal/External & field audits as assigned and to complete audit action items before due dates.
Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc.
Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required.
Conduct daily toolbox meetings as required.?
?
4.2 KEY ACCOUNTABILITIES
Policies, Systems, Processes and Procedures
Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.
Quality, Health, Security, Safety and Environment
Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services.
Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars.
Adhere to and follow all company safety policies, procedures, and Tenets of Operation.
Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents.
Understand the Q-Safe process and actively participates in accordance with expectations.
Actively Participate toolbox meetings and MSCM meetings as required.
Reporting
Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards.
Follow up metrics for employee safety performance and to achieve departmental KPI.
Qatarization
Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE
Education
Required: 2 years Diploma of relevant field.
Preferred: Bachelor’s degree in Engineering or relevant Technical degree.
Experience
Required: 3-5 years of experience in HVAC.
Preferred: Experience in Petrochemicals Industry
Languages
Required: English- proficient.
Preferred?:Arabic- working knowledge
WORKING RELATIONSHIPS
Internal
Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group
External
Vendors, Contractors, and Subcontractors</p>
Job Description - Sr. Network Engineer Requirements:Bachelor’s degree/Diploma in IT, Computer Science, Networking, BE Electrical/Electronics or related field. Strong experience in Huawei e Sight network management and monitoring. Huawei HCIE certification required. Hands-on experience with Cisco NMS and network monitoring tools. Minimum CCNP certification. Strong knowledge of enterprise network infrastructure, routing, switching and network troubleshooting. Experience in network performance monitoring, fault diagnosis and technical support. Ability to manage and resolve complex network issues independently. Good communication and coordination skills. Experience: Minimum 8-10 years of relevant experience in network engineering, preferably with Huawei and Cisco enterprise networks.<br>Candidates who are currently available in Qatar are preferred. Candidates with relevant experience may send their CVs to the Techno Q Recruitment Team at recruitment@technoq.com
<div> <div> <br> </div> <div> <strong>Role Objective</strong> </div> <div> <br> </div> <div>The incumbent is responsible for operating and implementing IT security measures for the Bank s security appliances and solutions to control access and prevent unauthorized modification, destruction, or disclosure of confidential information, and maintain integrity and availability of systems and data.</div> <div> <br> </div> <div> <strong>Detailed Roles and Responsibilities:</strong> </div> <div> <br> </div> <ul> <li>Guide the team in Installing, setting, configuring, and maintaining security appliances according to the overall objectives and policies of the Bank.</li> <li>Develop plans to safeguard the Bank s security appliances and components against accidental and/or unauthorized modification to data, disclosure of confidential information, and/or data corruption/loss.</li> <li>Develop security standards, baselines and procedures for security appliances, security devices and ensure that these standards and baselines are installed on the appliances</li> <li>Ensure that security violations are monitored and reviewed by the team which includes SOC alerts, logs and reports on a regular basis. Ensure that these are investigated, escalated to appropriate levels of management as necessary, and correctives actions are taken in a timely manner.</li> <li>Continuously assess security threats and vulnerabilities and provide recommendations to mitigate the same by ensuring security policies and procedures and control measures are implemented.</li> <li>Execute and implement the Bank s Information Technology policies and procedures, standards, and guidelines related to security of the network and communication software, hardware, and components, as well as monitor adherence to such policies and procedures, standards, and guidelines.</li> <li>Ensure that critical data transmissions are encrypted and protected from unauthorized access and/or disruptions.</li> <li>Ensure the enforcement of security controls.</li> <li>Lead the team during DR exercise and would be responsible for security appliances availability in DR site</li> <li>Ensure endpoint protection systems are Implemented, updated, maintained.</li> <li>Develop, implement, monitor and maintain network security monitoring tools to help detect security threats and vulnerabilities in a timely manner.</li> <li>Ensure high standards of confidentiality to safeguard commercially sensitive information.</li> <li>Provide timely and accurate information to the external and internal auditors and the Compliance function as and when required.</li> </ul> <div> <br> </div> <div> <strong>COMPETENCIES, KNOWLEDGE AND EXPERIENCE</strong> </div> <div>(Competencies, knowledge, and experience needed for the satisfactory performance of the job)</div> <div> <br> </div> <div> <strong>a. Educational Qualifications:</strong> </div> <ul> <li>Bachelor Degree.</li> <li>Degree/Diploma in Information Technology/Security.</li> <li>At least one Professional Certification such as CISSP, CCNP etc.</li> <li>Security product specialization would be preferable</li> </ul> <div> <strong>b. Experience:</strong> </div> <ul> <li>More than 10 years experience in IT Security/Information Security</li> <li>Working experience with Financial sector would be an advantage</li> </ul> <div> <strong>c. Behavioral Competencies: </strong> </div> <ul> <li>Active listening skills.</li> <li>Must be a team leader and a player and should able to work under pressure.</li> <li>Ability to influence others and move the team toward a common vision or goal.</li> <li>Should be process oriented and customer focus</li> <li>Should have good verbal and written communication skills</li> </ul> <div> <strong>d. Technical Competencies:</strong> </div> <ul> <li>Network and Security troubleshooting Knowledge</li> <li>Security Products Implementation and Administration experience</li> <li>Should be able to provide End user support</li> <li>Data Analysis</li> <li>Knowledge of Disaster Recovery and Business continuity</li> <li>Project Management</li> </ul></div>
Do you enjoy being part of a successful team?<br><br>Would you like to take ownership of a team delivering service to our customers?<br><br>Partner with the best<br><br>The Thermal Spray operator will work with respective cell leader of the Qatar Service Center to make sure all BH standards and Organizational need are met. He / She will also be responsible to perform Thermal Spray on Gas Turbine’s Combustion and Hot Gas path components by Using ABB Robotic manipulator in the organization.<br><br>Essential Functions (Responsibilities):<br><br>As Thermal operator. He/She will be performing below but not limited to.<br><br><br> Operates, programs and maintains specialized thermal spray equipment in accordance with work instructions and customer specifications. Preparation of laboratory samples / approval of new sprays and processes. Works with cell leader in the development of required fixtures for new product lines. Performs part changeovers and execution of work according to product specifications, drawings, and work instructions. Performs all work in accordance with plant safety rules and maintains highest quality standards in the execution of all assigned work. Performs routine preventative maintenance on all machines and other routine labor work as required in accordance with production flow. Preparation of components (masking and surface preparation) Blending/Polishing to remove overspray by using pneumatic grinders Vacuum furnace operations as requires He/ she shall be utilized on Welding, Grinding, Assembling, Shot peening, Bucket Moment weight etc… as requires Maintain a clean work area and contribute towards overall housekeeping efforts and other duties as needed Updates digital shop systems related to assigned work (Digital Work Order, Time Vouchering, Operation completion) Ensure the work area is compliance with HSE requirement Full compliance with BH Policies / Procedures<br><br><br>Fuel your passion<br><br>To be successful in this role you will:<br><br><br> Must have HS Diploma or GED. Strong shop mathematics, including addition, subtraction, multiplication, division, decimals and fractions required. On the job experience of 5 years in coatings of gas turbine components. Must be able to read and interpret drawings and coating specifications. Operation and programming of CNC equipment or production robots. Required Minimum knowledge on ABB Robots&IRC5 Controllers operations<br><br><br>Desired Characteristics:<br><br><br> Basic understanding of industrial safety; Basic technical understanding of manufacturing equipment and coatings; Basic understanding of tool and gauge handling Kawasaki Robots programing is an added value Proficiency on Robot Studio & Metco Coating Consoles is an added value. Self-starter, able to work with limited supervision Good learner& Problem solving Strong teamwork skills Flexible working hours Fluent written and spoken English Overhead crane operations<br><br><br>Work in a way that works for you<br><br>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.<br><br>Working with us<br><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br><br>Working for you<br><br>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br><br><br>Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options Safety net of life insurance and disability programs Tailored financial programs Additional elected or voluntary benefits.<br><br><br>The Baker Hughes internal title for this role is: ARMO Tech - Equip II<br><br>About Us:<br><br>We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet.<br><br>Join Us:<br><br>Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you! Let’s come together and take energy forward.<br><br>Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.<br><br>R167598
<p>Position Summary: Maintain launch/recover UC-35 Cessna Citation aircraft. Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Principal Accountabilities: Operationally checks repaired or modified systems for proper operation. Performs quality maintenance on assigned aircraft in accordance with federal aviation regulations, original equipment manufacturers, or military technical orders as specified in the statement of work instructions. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers' and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks, and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. May specialize in engine repair. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</li><li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li><li>Ability to read, write, and interpret technical duties is required.</li><li>Ability to communicate effectively with all levels of employees throughout the organization.</li><li>Proven track record demonstrating adaptability to change and the ability to respond to challenges in a changing environment.</li><li>Valid FAA A&P Certificate Required.</li><li>All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements.</li><li>Recent full-time experience in aviation maintenance with the assigned aircraft during the past 12 months.</li><li>Three (3) or more years aircraft mechanic experience as an aircraft mechanic on assigned aircraft required, five (5) years preferred.</li><li>Six (6) months of flight line and overhaul & inspection experience</li><li>Completion of formal maintenance training on assigned aircraft is desired.</li><li>Qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training.</li><li>High school diploma or equivalent.</li><li>Tools are provided by Amentum.</li><li>Must be able to obtain and maintain a US Govt DoW Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to see imperfections, micrometer readings and other small scales.</li><li>Must be able to read and interpret newspaper and typewritten print.</li><li>Must be able to communicate by voice and detect sounds by ear over telephone.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li><li>May be exposed to extreme noise from turbine and jet engine aircraft.</li><li>May be exposed to fumes or airborne particles.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li><li>Must be able to travel internationally to and between remote locations in austere and/or hostile environments.</li></ul>
Company Description Spectra Auto Motors is a growing automotive service provider in Qatar, specializing in comprehensive vehicle maintenance, repairs, and refinishing. The company focuses on delivering reliable mechanical, electrical, and bodywork services for a wide range of vehicles. Spectra Auto Motors values quality workmanship, safety, and customer satisfaction, and invests in modern tools and equipment to support these standards. Team members are encouraged to develop their technical skills and contribute to a collaborative, professional workshop environment.<br>Role Description This full-time, on-site role in Qatar combines responsibilities as an Auto Electrician and Automotive Painter. The team member will diagnose and repair vehicle electrical systems, including wiring, lighting, ignition, charging, and electronic components. Daily tasks include performing routine electrical maintenance, troubleshooting faults, and ensuring repairs meet safety and quality standards. The role also involves preparing vehicle surfaces, mixing and matching paint, applying primer and topcoat, and performing finishing work such as polishing and touch-ups. The Auto Electrician and Automotive Painter will work closely with other technicians, follow workshop procedures, maintain tools and equipment, and complete job documentation accurately.<br>Qualifications<br> <br>Candidates should possess strong Electrical Maintenance and Electricity skills for vehicle systems and components. Candidates should possess Fault Finding and Electrical Repairs skills to diagnose and resolve complex electrical issues. Candidates should possess Maintenance & Repair skills to perform scheduled services and corrective work on vehicles. Experience in automotive painting, including surface preparation, color matching, spraying, and finishing, is required. Ability to read and interpret technical manuals, wiring diagrams, and repair instructions. Relevant technical certification or diploma in auto electrical, automotive technology, or bodywork is preferred. Previous workshop experience in auto electrical repair and automotive painting, ideally in a professional garage or dealership. Attention to detail, commitment to safety, and ability to work efficiently in a team-oriented environment. Basic communication skills in English; knowledge of additional languages used in Qatar is an advantage.
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><ul><li><span><span>Prepare, format, review, and maintain technical and administrative documents, reports, correspondence, and records.</span><br></span></li></ul><p><span>•</span><span> Coordinate meetings, schedules, project activities, agendas, minutes, and follow-up actions.</span><br></p><br><p><span>•</span><span> Maintain organized physical and electronic filing systems, including confidential records.</span><br></p><br><p><span>•</span><span> Support IT hardware, PC, peripheral equipment upgrades, repairs, installations, and contract-related activities.</span><br></p><br><p><span>•</span><span> Respond to user queries and support the preparation of IT knowledge-base articles, guides, and training materials.</span><br></p><br><br><span>Requirements</span><p><b><b>Minimum 12 years</b></b><span>*</span><span> of relevant experience working within an<b> IT environment</b> is preferred.</span><br></p><br><p><span>•</span><span> Strong proficiency in Microsoft Office Suite and general computer applications.</span><br></p><br><p><span>•</span><span> Good knowledge of office administration, documentation, and record-management procedures.</span><br></p><br><p><span>•</span><span> Strong organizational, written communication, numerical, and basic statistical skills.</span><br></p><br><p><span>•</span><span> Fluency in written and spoken </span><span>*</span><b><b>English; Arabic</b></b><span>*</span><span> language skills are preferred.</span><br></p><br><br><span>BenefitsLongterm Project<br><br></span><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><span><u><b>Communication</b></u><br></span><span><b>Internal Communication:</b><br></span><span>Ship Officers<br>Senior Manager, Asset Management<br>Safety & Quality Department</span><span><br><b>Purpose:</b><br></span><span>To participate in methods of operation to prevent recurrence of casualty or mal-operation<br>To advise the Senior Manager Asset Management on the progress of all work under his/her control<br>To ensure that best in class Safety, Health & Environment (SHE)</span><span><br><b>External Communication:</b><br></span><span>Key Clients<br>Government & Regulatory Bodies</span><span><br><b>Purpose:</b><br></span><span>To ensure that Q-Ship's clients receive competitive and effective best-in-class services and products<br>To ensure Q-Ship's compliance with local and international laws, regulations and standards</span><span><br><u><b>Occupational Health & Safety and Environment</b></u><br></span><span><b>Accountability:</b><br></span><span>Accountable to their line manager and direct reports so far as is reasonably practical to ensure:<br>• a safe place or work;<br>• safe systems of work;<br>• safe plant & equipment;<br>• provision of information and training.</span><span><br><b>Responsibility:</b><br></span><span>Responsible for:<br>His/her personal safety and that of all personnel under his/her authority, including others who may be affected by the company's activities. In particular to:<br>• Conduct risk assessments on activities within their department ensuring that the methods and safe systems of work are safe and implemented;<br>• Ensure all employees and contractors under their control are competent to undertake their duties;<br>• Ensure all accidents, incidents and near misses are reported and investigated;<br>• Promote good behaviours and set a personal example with regard to occupational health and safety matters.</span><span><br><b>Authority:</b><br></span><span>Managers/Supervisors have the authority to stop work when health and safety is unsafe or being compromised.</span></span><br><p>Responsibilities:<br></p><span><span><b><u>Key Roles & Responsibilities</u></b><br></span><span>• Assist in managing new newbuilds construction projects and participate in testing procedures to ensure construction is compliant with set specifications and quality parameters;<br>• Maintain detailed awareness of vessel and machinery performance by means of planning regular repairs and follow up on defects;<br>• Provide guidance to technical assistants in terms of receiving and processing purchase requisitions according to Q-Ship procurement guidelines and ensuring appropriate documentation, compliance to procedure and timely placements of purchase orders;<br>• Investigate machinery failures and perform tests to diagnose technical issues in order to carry out corrective actions and report to Senior Manager Technical Management in this regard;<br>• Prepare vessels for dry-docking by coordinating with dry-docks personnel and perform regular inspections and repairs;<br>• Prepare contract specifications for overhauls, evaluate and oversee operation of equipment during acceptance testing;<br>• Ensure that all vessel certifications and surveys for class and flag are in order for vessel inspection and audits and ensure all relevant documentation is properly kept, maintained and updated;<br>• Prepare financial budgets reports including activities such as maintenance repairs, stores and dry-docking of vessels;<br>• Assist in ensuring Q-Ship's vessels operate in compliance with best-in-class Safety, Health & Environment (SHE) Management practices and international regulations;<br>• Maintain cost controls on technical operations with respect to budgets and prepare cost-benefit analysis and report on vessel engineering and modifications;<br>• Analyze risks associated with vessel and machinery performance with respect to Safety, Health & Environment (SHE) issues, and coordinate the development and deployment of Contingency Plans;<br>• Perform other job-related duties as assigned by Senior Manager Technical Management.<br>• Ensure operations/work processes occur in accordance with all relevant legal, regulatory, and any other standards and requirements to which compliance is required<br>• Ensure the health and safety of all employees and the protection of the environment for all sites/work premises under their control.</span></span><br><p>Qualifications:<br></p><span><span><b>Education & Professional Qualification:</b><br></span><span> Bachelor Degree in Marine Engineering, Mechanical Engineering, Electrical Engineering or any related field</span><br><span><b>Professional Experience: </b><br></span><span>3 - 5 years of experience in Vessel dry docking or any related field</span><br><span><b>Geographic Experience: </b><br></span><span>A plus</span><br><span><b>Computer Skills: </b><br></span><span>Good knowledge of Office and web applications</span><br><span><b>Language Skills: </b><br></span><span>Business fluent English</span><br><span><b>Market/Industry/Functional Knowledge: </b><br></span><span>- Good knowledge vessel operations, administration and inspection activities<br>- Good knowledge of vessel new-building and construction projects<br>- Good knowledge of Quality Management Systems, such as ISO 9001</span></span> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><u><b>Job Summary</b></u>
<br></span><p>The role of a Technical Director in the typically involves overseeing and managing technical aspects of various projects and operations within the industry. This role is responsible for providing leadership, expertise, and strategic direction to ensure the successful implementation and maintenance of energy and utility systems.</p><br><br><br><u><b>Job Responsibilities 1</b></u>
<br><p>Provide all technical support for all engineering disciplines to the potential investments, and determine the different phases, scope, budget, quality, and time.</p><br>
<p>Support the Investment Implementation Department for all procurement, investment control functions and commercial aspects of the investment.</p><br>
<p>Provide technical inputs to all HQ and site organization in accordance with the terms of the contract and advise taking of all measures necessary for the performance of the works.</p><br>
<p>Be authorized to represent in dealing of all technical matters with the client and third parties, making statements and representations in connection with negotiations with the client.</p><br>
<p>Provides technical, operational, and managerial leadership for successful development and implementation of the investment.</p><br>
<p>Oversee all implementation of investments that are in line with the original plans and forecasts.</p><br>
<p>Develop, implement, and monitor operational systems and processes that provide visibility into goals, progress, and obstacles for our key initiatives.</p><br>
<p>Plan, monitor, and analyze key metrics for the performance of the operations to ensure efficient and timely completion of tasks.</p><br>
<p>Manage the key stakeholder’s communication and requirements mainly the client, Joint Venture members (if any) and leading entities for all technical matters.</p><br>
<p>Support that investment technical activities operate within the policies and procedures and comply with all relevant legislation and professional standards.</p><br>
<p>Accountable on investment budget and baseline development for technical inputs.</p><br>
<p>Contribute in decision making cycle through preparing consolidated reports and address any specific challenges, risks, and mitigations about technical matters.</p><br>
<p>Work with functional managers in the development, implementation and operation phase in HQ and site organizations.</p><br>
<p>Review and approve all design activities of the investments.</p><br>
<p>Manage risks of all investments related to technical matters to avoid delays or reputational damage.</p><br>
<p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u>
<br><br><b>Additional Responsibilities 3</b>
<br><br><u><b>Job Knowledge & Skills</b></u>
<br><p>Extensive experience with a proven track record of managing technical projects.</p><br>
<p>Strong knowledge of related technologies.</p><br>
<p>Proficiency in project management methodologies and tools.</p><br>
<p>Familiarity with regulatory compliance and safety standards in the industry.</p><br>
<p>Excellent leadership, communication, and interpersonal skills.</p><br>
<p>Commitment to sustainability and environmental responsibility.</p><br>
<p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u>
<br><p>Minimum 15 year(s) working experience, 10 year(s) in a relevant management/leadership position, 5 year (s) GCC and Central Asia is a plus</p><br><br><br><u><b>Competencies</b></u>
<br>Build High-Performing Teams<br>AI Fluency<br>Speed of Execution<br>Build Process and Systems<br>Provide Direction<br>Agility<br>Drive Cost Optimization<br>Cost Management L5<br>Leadership<br>Project Management L5<br>Proposal Management L5<br>QA/QC L5<br>Quality<br>Resilience<br>Stakeholder Engagement & Communication L5<br><br><br><u><b>Education</b></u>
<br>Master's degree<br>Bachelor's Degree in Engineering or any related field<br><br><br><br>
</div>