HSE Engineer Jobs in Qatar

We are looking for an experienced Senior Corrosion Engineer to provide technical expertise in corrosion engineering, ensuring effective corrosion monitoring, control and mitigation across oil and gas facilities. The role will support the integrity, safety, reliability and environmental performance of facilities while reviewing corrosion-related requirements for new projects and modifications.<br> <br>Contract duration: 24months to 36 months initial contract duration.<br> Onshore Base.<br> NFPS Compression project prefers candidates with Offshore experience.<br> <br>Minimum Requirements<br>Review material and design requirements for new projects and modifications, including corrosion monitoring and control programs.<br>Develop and implement corrosion control and monitoring programs covering:<br>Cathodic protection<br>Protective coatings and linings<br>Chemical inhibition<br>Corrosion monitoring systems<br>Conduct corrosion monitoring, prevention activities and corrosion investigations.<br>Monitor Integrity Operating Windows affecting corrosion and equipment life and provide recommendations to Operations.<br>Develop Statements of Work (SOWs) for corrosion-related studies, investigations and contracts.<br>Review technical reports and test results related to corrosion control, chemical selection and failure analysis.<br>Develop coating and painting requirements for pipelines, structures, equipment and tanks.<br>Provide recommendations on coating systems, application procedures and quality control requirements.<br>Inspect coating conditions and coordinate with inspectors to ensure appropriate quality control.<br>Provide technical advice on corrosion engineering to internal teams, vendors, consultants and other external stakeholders.<br>Develop and maintain corrosion and integrity-related procedures, standards, processes and best practices.<br>Develop and implement corrosion engineering programs for offshore and onshore facilities, pipelines, process plants, storage facilities and export/loading facilities.<br>Review corrosion engineering reports, test results and failure investigations and recommend corrective actions.<br>Perform risk assessments related to corrosion and equipment integrity.<br>Provide technical expertise in corrosion control and mitigation methods, including chemical treatment, cathodic protection, material selection, protective coatings, linings and corrosive process conditions.<br>Raise and manage technical change requests related to corrosion studies, cathodic protection, coatings and linings.<br>Liaise with operations, maintenance, engineering, HSE, inspection, procurement and other relevant departments on corrosion-related matters.<br>Support the evaluation of corrosion service providers, laboratories, consultants and specialist contractors.<br> <br>Qualifications<br>Bachelor's Degree in Engineering, preferably in Chemical, Metallurgical or Materials Engineering.<br><br>Experience & Technical Knowledge<br>Minimum 6 years of experience in corrosion control and mitigation within the Oil & Gas industry.<br>Strong knowledge and practical experience in:<br>Chemical inhibition<br>Corrosion monitoring<br>Material selection<br>Corrosion and material degradation mechanisms<br>Failure analysis<br>Sour service<br>Protective coatings and linings<br>Cathodic protection<br>Experience with corrosion systems and plant facilities involving sour feed gas and exposure to marine environments, including utilities facilities.<br>Good knowledge of national and local regulations, international codes and standards, statutory requirements, NDT and inspection techniques.<br>Experience in corrosion management within both onshore and offshore oil and gas facilities is preferred.<br><br>Skills & Competencies<br>Good written and spoken English.<br>Strong analytical, problem-solving and decision-making skills.<br>Ability to interpret technical data, reports and investigation findings.<br>Good interpersonal and communication skills.<br>Ability to communicate effectively with personnel at all organizational levels.<br>Computer literate.<br>Ability to work independently and provide sound technical recommendations.<br>Strong leadership and stakeholder management skills.<br><br>People are our business worldwide<br> <br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

Job Description<br><br>Senior Mechanical Engineer (Buildings & Infrastructure) <br><br>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property & buildings, and transportation sectors.<br><br>As part of our continued growth in the Middle East, we are expanding our Engineering team to support a strong pipeline of multidisciplinary projects. We are seeking a highly experienced Senior Mechanical Engineer to lead the design and delivery of complex mechanical systems across buildings, infrastructure, and industrial developments.<br><br>This is a leadership role combining technical excellence, project delivery, and client engagement.<br><br>Key Responsibilities<br><br>Lead the design and delivery of mechanical engineering systems across all project stages (concept, detailed design, construction, and commissioning). Ensure compliance with relevant regulations and international standards (e.g., ASHRAE, IPC, NFPA, CIBSE, and relevant authority requirements). Drive design quality through technical reviews, calculations, simulations, value engineering, design optimization, and multidisciplinary coordination. Utilize advanced modelling and digital tools (Revit, BIM workflows, energy modelling platforms). Provide technical leadership, mentoring, and guidance to junior and mid-level engineers. Coordinate with architects, structural, electrical, and specialist teams to ensure integrated design delivery. Conduct site inspections, audits, and performance assessments to ensure alignment with design intent. Lead mechanical design reviews, identify technical risks and design gaps, and implement practical engineering solutions in line with project requirements and commercial objectives. Support project managers in tracking progress, managing risks, and maintaining delivery timelines. Engage directly with clients—presenting solutions, resolving challenges, and building long-term relationships. Contribute to innovation initiatives, sustainability strategies, and digital engineering improvements.<br><br>Required Qualifications & Experience<br><br>Bachelor’s or master’s degree in mechanical engineering. Minimum 8–12 years’ experience in mechanical engineering, specifically within building services in the UAE. Proven experience delivering complex projects with minimal supervision. Strong expertise in:HVAC design and energy-efficient systems Mechanical plant design and equipment selection Piping systems and system integration Proficiency in industry-standard tools:Auto CAD, Revit (BIM), IES, HAP, and mechanical calculation software Strong knowledge of:UAE authority regulations and approval processes International codes (ASHRAE, IPC, NFPA where applicable) Experience in preparing:Technical reports and specifications Feasibility studies Familiarity with Building Management Systems (BMS) and smart building integration. Strong commercial awareness and understanding of project delivery frameworks in the UAE.<br><br>Preferred Attributes<br><br>Chartered Engineer status or working toward professional accreditation. Experience on large-scale or high-profile developments in the UAE or GCC. Exposure to sustainability frameworks (LEED, Estidama, Net Zero strategies). Experience working in multidisciplinary consultancy environments.<br><br>Why Join Us?<br><br>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions. Join a team that values knowledge-sharing, mentorship, and professional excellence. Be part of a workplace that combines collaboration, flexibility, and connection. Join us in the office three days per week to contribute, connect and excel in our vibrant environment.

IT Support Engineer – Dispatch / Part Time Locations:Nestlé Qatar Trading LLC, PO BOX 24603, Doha, Qatar GWC Building, Sulba Warehousing Park, Street 15, Logistics Village Quarter, Doha, Qatar<br>Pay Rate: $15/hour as ICContract: Long-Term, Part-Time / On-Demand<br>Job Summary Sky Sys is looking for a Field IT Support Engineer to provide onsite dispatch support at client locations in Doha. Visits will be scheduled on an as-needed basis, typically 1–2 visits per month, with at least 24 hours' advance notice.<br>Required Skills1+ years of Field IT / Desktop Support experience. Strong hardware/software troubleshooting and PC break/fix experience. Knowledge of Windows OS, networking, VPN, DNS, DHCP, and RDP. Experience with printers, laptops, desktops, and other peripherals. Smart Hands / onsite infrastructure support experience. Strong communication and customer service skills. Ability to lift/move IT equipment up to 50 lbs. Personal laptop required for onsite support and remote connectivity. NOC required confirming sponsor authorization to work with Sky Systems. Comp TIA A+ or relevant technical certification is preferred.<br>Working Model Part-time / On-demand Dispatch Support Approximately 1–2 onsite visits per month to start.$15/hour as Independent Contractor (IC). Support generally required during Monday–Friday business hours. At least 24 hours' notice will be provided for onsite visits whenever possible.

At ABB, we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world.<br><br>This position reports to:<br><br>Project Manager, AUEN<br><br>__<br><br><br>Your Role And Responsibilities<br><br>In this role, you will have the opportunity to execute service work of medium to high complexity as per work instructions and ABB guidelines. Each day, you will deliver excellent customer service to satisfy customers. You will also showcase your expertise by working with customer to identify opportunities in the installed base, to improve system performance and operational performance.<br><br>The work model for the role is Onsite.<br><br>This role is contributing to the PAEN division in Qatar.. Main stakeholders are Project Team, Project Lead and Project Manager.<br><br>You will be mainly accountable for:<br><br>Contributing to customer satisfaction by planning and executing service work as per customer order and expectations. Ensuring customer retention by delivering superior customer experience and effectively communicating service work timeline and expectations. Taking actions to identify new service business opportunities for ABB, in close cooperation with customer and other ABB teams. Capability to transfer high complexity project requirements into ABB technical solutions Coaching technicians and engineers and supervising complex site activities. Multidiscipline support Effective utilization of service contracts Working in service projects and major projects for Infi90 / symphony based system 800x A system Rendering technical validation of design solutions in medium and complex projects<br>Our team dynamics <br><br>You will join a dynamic and high performing team, where you will be able to thrive.<br><br><br>Qualifications For The Role<br><br>Graduate Engineer in Electrical/ Electronic/ instrumentation Engineering Must have minimum 8 years of experience of which at least 5 years as customer support / project / service engineer of System 800x A based Infi90 / Symphony systems preferably in Oil & Gas / Power & Water industry Good hands-on experience as Senior Engineer for system 800x A based control system (both hardware and software) with Infi90 / symphony Plus / system 800x A -based application development – project & commissioning Hands own experience in system installation and maintenance Hands on Experience in Industrial networking, network switch configuration Hands on experience in Cyber security solutions for 800x A systems. Able to do cybersecurity audits and assessments, Cyber security implementation experience Be an analytical thinker, self-starter, resilient and highly adaptable- in line with ABB’s latest advance service & digital portfolio Hands on Experience in industrial communication protocols like Modbus- RTU & TCP, OPC etc Be able to work under pressure, handle stress and have the ability to use own initiative. Highly adaptive, analytic and quick learner – inline with ABB’s latest advance service & digital portfolio Giving trainings to customers Working in offshore installed bases<br><br>What's in it for you? <br><br>We want you to bring your full self to work—your ideas, your energy, your ambition. You’ll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day.<br><br>Join us. Be part of the team where progress happens, industries transform, and your work shapes the world.<br><br>Run What Runs the World.<br><br>#ABBCareers<br><br>#Runwith ABB<br><br>#Runwhatrunstheworld<br><br><br>More About Us<br>ABB’s Energy Industries division is enabling safe, smart, and sustainable projects and operations for businesses across the oil, gas, chemicals, power generation, life sciences and water sectors. Driving integrated solutions that automate, digitalize, and electrify industry we connect our people and technology to help our customers adapt and succeed. With over 50 years domain expertise, we continue to innovate and reshape traditional approaches across the energy sector. Our technologies and solutions are designed to create value, improving operational efficiency and productivity, enhancing safety and minimizing risk. We support the development of new and renewable energy models - enabling energy efficient and low carbon operations across traditional industries.<br><br>Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences.<br><br>Ready to make an impact?<br><br>Apply today or visit https://www.abb.com to learn more about the impact of our solutions across the globe.

Experience: 3–4 Years Role Overview We are looking for a Crowd Strike Professional Services Engineer with 3–4 years of cybersecurityexperience and hands-on exposure to the Crowd Strike Falcon platform. The candidate will supportcustomer implementations, endpoint onboarding, Falcon configuration, security policy tuning,troubleshooting, and integration with existing security environments. Key Responsibilities• Deploy and configure Crowd Strike Falcon across customer environments.• Perform endpoint/sensor onboarding for Windows and Linux systems.• Configure Falcon security policies, prevention controls, exclusions, and detection settings.• Monitor and investigate endpoint security alerts and assist with incident response activities.• Support implementation and optimization of EDR/XDR capabilities.• Troubleshoot Crowd Strike sensor installation, connectivity, policy, and operational issues.• Assist with integration of Crowd Strike with SIEM, SOAR, and other security platforms.• Support customer implementation, migration, upgrade, and optimization projects.• Develop technical documentation and implementation procedures.• Work with SOC, security, infrastructure, and customer teams to resolve technical issues.• Provide knowledge transfer and technical guidance to customers. Required Skills• 3–4 years of experience in Cybersecurity / Information Security.• Hands-on experience with Crowd Strike Falcon.• Practical knowledge of EDR/XDR and endpoint security.• Experience with endpoint agent/sensor deployment and management.• Knowledge of Windows and Linux environments.• Experience with security policies, exclusions, detections, and alert investigation.• Understanding of SIEM integration and security operations.• Basic scripting knowledge in Power Shell, Python, or similar is an advantage.• Good troubleshooting and analytical skills.• Strong communication and customer-facing

Vacancy Overview<br><br>Civil Structure Engineer<br><br>Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.<br><br>Airswift is seeking for Civil Structure Engineer to work in Qatar with a major Oil & Gas Company. <br><br>Job Purpose<br><br>Provide specialized technical expertise in the design and analysis of onshore/offshore structures and infrastructures, ensuring alignment with department goals and Company strategy. Achieve high-quality, and efficient structural solutions for greenfield and brownfield structures to maintain reliable and safe operation.<br><br>Qualifications Requirement<br><br>Bachelor’s degree in civil/structural engineering.8 years’ experience in an oil and gas environment. Experience in greenfield and brownfield Civil/Structural for both onshore and offshore facilities. Knowledge of relevant International Codes & Standards such as BS, ASCE, ACI, AISC, UBC, API RP, etc.<br><br>Key Responsibilities<br><br>Provide a variety of civil/structural/marine engineering support to contribute to OES’ goals including design reviews, specifications review/update, studies, failure analysis and advanced troubleshooting. Perform economic and financial evaluation of all conceptual studies and prepare design basis, and civil/structural/marine design packages as per Company specifications and international codes such as BS, API, OCIMF, PIANC, ISGOTT, ASCE, ACI, AISC, AASHTO, USACE, UBC and Qatar National Construction Standards. Provide technical expertise support to Project Team throughout Project Life Cycle (Pre-FEED/FEED/Detail design stages/construction/installation) ensuring quality and flawless execution. Coordinate all aspects of civil/structural/marine engineering and provide technical support to operation and maintenance for across Company onshore/offshore facilities. Lead the definition and implementation of integrity program for steel/concrete structures to achieve high standards of safety, reliability, and integrity/availability. Act as Subject Matter Expert and develop civil/structural detailed drawings and procedures for the department. Support the organization for high-level technical tasks. Perform all the necessary complex/high level analysis as per the applicable specification or codes along with computer analysis software e.g. STAAD for onshore and SACS for offshore. Provide technical support in all sessions of Root Cause Failure Analysis (RCFA), RHAZOP, risk assessment, lifting, excavation certificate, inspection program, etc. Liaise with consultants or shareholders, represent Company to external agencies, conduct technical presentations and support less experienced engineers to develop their capabilities. Develop training programs to keep abreast of new technologies and mentor less experienced engineers to develop their capabilities. Provide support to department Operations Readiness Plan (ORP) process, following up on deliverables, meeting milestone target dates and ensuring proper handover/completion as per Company policy and procedure.

Job Summary We are looking for an experienced Cybersecurity Engineer & Consultant with strong hands-on expertise in Open Text Fortify and application security. The role will be responsible for implementing, configuring, integrating, and supporting Fortify solutions across enterprise environments while providing cybersecurity consulting and professional-services expertise. The ideal candidate will have strong experience in Fortify SAST, SCA, SSC, DAST/Web Inspect, application security testing, vulnerability management, and Dev Sec Ops, along with the ability to work directly with customers and cross-functional technical teams. Key Responsibilities Implement, configure, and support Open Text Fortify application security solutions. Conduct application security assessments using Fortify SAST, SCA, DAST/Web Inspect, and related technologies. Configure and administer Fortify Software Security Center (SSC). Integrate Fortify with enterprise development environments and CI/CD pipelines. Support Dev Sec Ops initiatives by embedding security testing throughout the SDLC. Configure Fortify scanning policies, security rules, application profiles, and security controls. Analyze scan results and perform vulnerability triage, validation, and false-positive analysis. Work with development teams to identify root causes and provide vulnerability remediation guidance. Monitor application security risks and prepare security reports and dashboards. Support Fortify upgrades, migrations, integrations, configuration changes, and troubleshooting. Design and implement application security solutions based on customer requirements. Conduct security assessments, technical workshops, demonstrations, and knowledge-transfer sessions. Develop HLD/LLD, implementation plans, configuration guides, and operational documentation. Collaborate with application development, Dev Ops, infrastructure, SOC, cybersecurity, and project teams. Provide technical consulting throughout implementation, testing, deployment, and post-production support. Identify opportunities to improve application security processes, automation, and Dev Sec Ops maturity. Ensure implemented solutions comply with organizational security standards and application-security best practices. Required Technical Skills Open Text Fortify Fortify SASTFortify SCAFortify Software Security Center (SSC) Fortify DAST / Web Inspect Application Security Vulnerability Assessment & Management SAST / DAST / SCADev Sec Ops Secure SDLCApplication Security Testing Vulnerability Triage & Remediation Security Risk Assessment Security Reporting Security Controls & Policies Cybersecurity Consulting Integration & Dev Ops Skills Jenkins Git Lab CI/CDAzure Dev Ops Git Hub Actions Git CI/CD pipeline security integration REST APIsAutomation and scripting SDLC integration Dev Sec Ops toolchain integration Cybersecurity Skills Application security architecture Vulnerability management Secure coding principles OWASP Top 10Web application security API security Risk assessment and vulnerability prioritization Security remediation and mitigation Threat and security analysis Security testing methodologies Cybersecurity best practices Security governance and compliance awareness Required Experience5+ years of experience in cybersecurity, application security, security engineering, or security consulting. Strong hands-on experience implementing and supporting Open Text Fortify solutions. Experience with Fortify SAST, SCA, SSC, and DAST/Web Inspect. Strong understanding of application security testing and vulnerability management. Experience integrating security tools into CI/CD and Dev Ops environments. Experience working with development and Dev Ops teams to remediate security vulnerabilities. Experience in enterprise application-security environments. Professional Services / Consulting experience is strongly preferred. Strong customer-facing, communication, presentation, and stakeholder-management skills. Ability to independently troubleshoot technical issues and provide security recommendations. Preferred Certifications Open Text Fortify Certification Certified Ethical Hacker (CEH) OSCPCISSPCSSLPGIAC certifications Relevant Dev Sec Ops / Application Security certifications

Job Description<br><br> Build and support event-driven messaging services using Solace across integrated platforms. Perform Solace administration including configuration, maintenance, patching, upgrades, and queue/topic design. Troubleshoot message delivery failures, integration issues, and messaging bottlenecks. Collaborate with application teams to define messaging SLAs for critical payment and entity-onboarding flows. Support messaging design reviews, operational readiness, deployment validation, and production support activities. Maintain clear documentation for queue/topic configuration, support procedures, known issues, and operational handover.<br><br>Responsibilities<br><br>Experience: 6+ Years<br><br>Good To Have<br><br> Experience in payment / transaction processing systems. Exposure to Mulesoft ESB and Anypoint Platform. Experience supporting integration services in Kubernetes / OKE environments.<br><br>Qualifications<br><br> Bachelor's or Master's degree in Computer Science, Information Technology, or related field. Strong analytical and troubleshooting skills. Excellent communication and documentation abilities. Ability to work independently and in cross-functional teams. Willingness to learn and adapt to new technologies.

Primary Purpose Of The Job<br><br>Perform comprehensive Project Planning, Scheduling, Progress monitoring, Progress Verification and reporting activities necessary to achieve the successful execution of the assigned Project(s) from initiation to close-out.<br><br>Required Experience And Skills<br><br>Minimum 15 years’ experience in planning of projects in Oil & Gas including large capital and/or portfolio projects with onshore brownfield and greenfield projects including gas processing plants, refineries, onshore pipelines, etc. Preferably minimum 5 years’ experience in National Oil Companies and/or International Oil Companies. Experience in EPC project lifecycle, encompassing engineering, procurement, construction & commissioning Experience in pre-commissioning and commissioning planning, including system-wise handover strategies Experience in developing and managing shutdown schedules covering the full cycle: pre-shutdown preparation, shutdown execution and post-shutdown activities. Experience includes project planning, scheduling & phasing, project control & monitoring, forecasting, trending, risk assessment, variations/claims analysis, progress verification. High level of computer literacy with MS Office and relevant Project Control software including Primavera. Skills in Primavera Risk Analysis and Power BI are preferable. Work experience in the GCC is desirable Well-developed analytical and reporting skills.<br><br>Educational Qualifications<br><br>B. Sc. or equivalent in an Engineering Discipline. Preferably Certified PMP or equivalent certifications/memberships.

Primary Purpose Of The Job<br><br>Perform comprehensive Project Planning, Scheduling, Progress monitoring, Progress Verification and reporting activities necessary to achieve the successful execution of the assigned Project(s) from initiation to close-out.<br><br>Required Experience And Skills<br><br>Minimum 15 years’ experience in planning of projects in Oil & Gas including large capital and/or portfolio projects with onshore brownfield and greenfield projects including gas processing plants, refineries, onshore pipelines, etc. Preferably minimum 5 years’ experience in National Oil Companies and/or International Oil Companies. Experience in EPC project lifecycle, encompassing engineering, procurement, construction & commissioning Experience in pre-commissioning and commissioning planning, including system-wise handover strategies Experience in developing and managing shutdown schedules covering the full cycle: pre-shutdown preparation, shutdown execution and post-shutdown activities. Experience includes project planning, scheduling & phasing, project control & monitoring, forecasting, trending, risk assessment, variations/claims analysis, progress verification. High level of computer literacy with MS Office and relevant Project Control software including Primavera. Skills in Primavera Risk Analysis and Power BI are preferable. Work experience in the GCC is desirable Well-developed analytical and reporting skills.<br><br>Educational Qualifications<br><br>B. Sc. or equivalent in an Engineering Discipline. Preferably Certified PMP or equivalent certifications/memberships.

About Us<br><br>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.<br><br>Key Responsibilities<br><br>Builds positive working relationships with external parties such as the customer, suppliers, and contractors. Proactively resolve performance, scope, cost and schedule issues with the Client as they arise. Ability to identify and achieve the optimal technical and commercial position within the job context Monitor design activities, interdisciplinary data flow and communications. Responsible for design basis, design scopes and subsequent performance Manage, technical evaluations, risks identification, mitigation & control, project deliverables review, scope control & managing project variations, recovery planning, construction, commissioning, & project handover. Prepare Project Scope Statement. Design reviews and technical review meetings are scheduled, well documented and actions closed out. Client approvals are achieved without delay or rework. Consistently achieve above average client satisfaction rating for technical delivery. Management of disciplines to achieve scope completion at or below budget. Prompt claims identification, quantification and justification provided to project manager.<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. <br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Engineering from an accredited university MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage<br><br>Industry Specific Experience<br><br>Extensive work experience in onshore projects at a senior level within the Oil & Gas industry. Must have experience of working with multidisciplinary teams Must have well developed engineering planning skills Preferably Middle East experience Experience working with an international engineering consultancy Experience in interface management with Statutory authorities and external stakeholders Strong experience in brownfield environment Mandatory experience in Pre-FEED and FEED phase <br><br>Moving forward together<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br><br>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Primary Purpose Of The Job<br><br>Perform studies, plan, initiate, evaluate and develop infrastructure projects to ensure<br><br>that all common facilities in the industrial cities are in place to accommodate the<br><br>anticipated growth of existing and future Qatar Energy, Joint Ventures and Asset<br><br>Operators’ industries.<br><br>Collaborate with concerned Qatar Energy Departments, Joint Ventures and asset<br><br>operators, to identify synergy opportunities, formulate the necessary conceptual<br><br>studies, development plans, project concepts, engineering plans, project execution<br><br>plans and related activities.<br><br>Required Experience And Skills<br><br>Minimum 10 years broad design experience within the Oil & Gas and/or Petrochemical industry (preferably with 5 - 8 years with consulting / engineering firm). Exposure and experience in project lifecycle and project management with high supervisory skills. Exposure to international experience and an appreciation of cultural sensitivities.<br><br>Educational Qualifications<br><br>Internationally recognized Bachelor’s Degree in Process/Chemical Engineering

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules Manage process design and any design changes within budget and schedule. Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Reviews documentation to assist others and reviews/authorizes work done by direct reports. Evaluate new technology advancements against existing design standards and revise where applicable. Identify and review new technology development which could be applicable in providing more cost-effective facilities. Perform discipline specific engineering services such as: Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. Quality Assurance: Responsible for working within the provisions and guidelines of the Quality Assurance systems. Safety: responsible for personal safety safe working practices. Understand and follow OH&S procedures Promoting health, safety and environmental awareness. <br><br>Industry Specific Experience<br><br> Must have process design in onshore/offshore oil & gas industry in a brownfield environment with focus on rotating equipments. FEED and detailed engineering experience essential. Decent experience in an engineering consultancy in a multidiscipline environment is essential.<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br> Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage<br><br>IT Skills<br><br>Simulations <br><br> Aspen suite, Hysys, Pipesys, Flare Net PRO-II<br><br>Flow Assurance<br><br> Pipe Net Pipesim PVTSim/OLGA Pipe Phase TLNET Fathom<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>The Facilities Engineer will support the operation and maintenance of <strong>electromechanical building systems</strong>, ensuring maintenance activities are delivered effectively, safely, and in accordance with required technical standards.</p><br><br>Key Responsibilities<ul><li>Coordinate preventive, corrective, and reactive maintenance activities.</li><li>Monitor electrical, mechanical, ELV, HVAC, and associated electromechanical systems.</li><li>Conduct technical inspections and identify maintenance requirements.</li><li>Troubleshoot technical faults and recommend corrective solutions.</li><li>Coordinate supervisors, technicians, and specialist contractors.</li><li>Monitor system performance and reliability.</li><li>Ensure compliance with QHSE and applicable technical standards.</li><li>Prepare technical reports and maintenance recommendations.</li><li>Support planning and supervision of technical teams.</li></ul>Requirements<ul><li>Bachelor's degree in <strong>Mechanical or Electrical Engineering</strong>, or equivalent.</li><li>Minimum <strong>3 years' Facility Management experience</strong>.</li><li>Experience with similar-sized projects within the GCC.</li><li>Strong knowledge of electrical, mechanical, and ELV systems.</li><li>Good knowledge of standards applicable within Qatar.</li><li>Good understanding of Quality Management and QHSE requirements.</li><li><strong>Fluent in Arabic and English, spoken and written.</strong></li><li>QCDD certification preferred.</li><li>Grade B classification by Kahramaa / competent authority preferred.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provides broad technical expertise in corrosion engineering ensuring facilities are efficiently monitored and controlled to meet the Company's production objectives in a cost-effective manner while maintaining the highest level of integrity, safety, and environmental compliance.</li> <li>Reviews design specification requirements for new projects and modifications.</li> </ul><br><ul> <li>Reviews material and design requirements of new projects and modifications including the design requirement and monitoring criteria for all the Corrosion Programs like Cathodic Protection, protective Coating&amp; lining, Chemical Inhibition and Corrosion Monitoring Systems and submits recommendations to supervisor.</li> <li>Conducts corrosion monitoring and prevention activities and corrosion investigation. Includes monitoring Integrity Operating Windows affecting corrosion and equipment life and advising Operational suitability.</li> <li>Develop SOW and Participate in review of the test reports for technical evaluation of Corrosion related Contracts like Chemical selection for corrosion prevention in pipelines and process plants.</li> <li>Develops painting/coating requirements for pipelines, structures, equipment and tanks and gives recommendations to supervisor about selection of systems and procedures for proper quality control.</li> <li>Inspect painting conditions and work with inspectors to conduct quality control checks for painting jobs.</li> <li>Provide direct and indirect advice in the field of corrosion engineering to multiple parties within or interfacing with or acting as the technical representative for Opco with outside organizations (i.e., shareholders, vendors, other corrosion consultants).</li> <li>Develop new and maintain existing corrosion and integrity related procedures, processes, standards, and best practices as needed in order to maintain compliance with regulatory standards or improve the effectiveness and efficiency of corrosion mitigation.</li> <li>Assess regional corrosion control programs to determine companywide consistency to policies, practices and procedures.</li> <li>Develop, implement, and steward corrosion engineering programs for company facilities including offshore platforms, pipelines, onshore process facilities, condensate refinery, storage facilities, export and loading facilities and ensure that company utilizes cost effective corrosion control and monitoring equipment.</li> <li>Review/analyze corrosion engineering reports, test results, failure investigations etc. and provide recommendations for corrective measures or actions to restore equipment functionality, improve equipment performance, or to extend its operating life. Perform the Risk analysis for Corrosion related assessments.</li> <li>Drive strategic technical innovation and provide expertise and guidance in area of corrosion control and mitigation methods including chemical treatment, cathodic protection, metallic and non-metallic material selection, protective coatings and linings, corrosive process conditions, etc.</li> <li>Raise PMCRs for Corrosion Studies, or Cathodic Protection and Coatings &amp; Lining changes.</li> </ul><br><ul> <li>Bachelor's degree in Engineering, (Chemical, Metallurgical, Materials).</li> <li>6 years' experience in corrosion control and mitigation within the oil/gas production industry.</li> <li>Skilled and Competent in chemical inhibition, corrosion monitoring, material selection, degradation mechanisms, and failure analysis for sour service and utilities facilities, protective coatings, corrosion monitoring, chemical inhibition and cathodic protection.</li> <li>Experience in corrosion systems and in plant facilities with sour feed gas and plant exposure to a marine climate, including Utilities.</li> <li>Working knowledge of national and local codes, International Codes and Standards, statutory regulations, NDT and inspection techniques.</li> <li>Proficient written and spoken English.</li> <li>Computer literate.</li> <li>Well-developed interpersonal skills and ability to communicate at all levels with the Organization.</li> <li>Work requires analytical, interpretative and constructive thinking, with a significant degree of evaluative judgment, as well as influential leadership behaviours.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

Job Description<br><br> Taking up full ownership of assigned technical and development activities for change requests, minor enhancements, major enhancements, and project tasks for mobile app development requests. Perform mobile app development and configuration. Managing IOS certifications, licensing and XCODE Development using languages / tools such as SQL, Java Script, C# and Integrations using REST APl's, JSON etc. Host and deploywebservices as required. Document code consistently throughout the development and/or enhancement process Generate and maintain required design and other documentation for the development tasks. Design solutions based upon business requirements and user specifications. Review technical solutions when needed. Participate in peer code/design reviews to ensure the delivery of quality solutions. Liaise with functional consultants primarily and with Business IS teams when needed during the design, development, and testing processes. Review, fix, enhance and develop code. Perform quality assurance for all deliverables. Follow HMC Service Management guideline, adhering strictly to the processes and use the HMC ticket management system to follow Change and Release management processes for technical deployments.<br><br>Responsibilities<br><br> Certified Volt MX Developer having Volt MX IDE development experience. Kony cross-platform development experience on Android, i OS (both Mobile and Tablet) and Desktop web platforms. Excellent Core Java/J2EE knowledge. Mandatory experience working with UI/UX using Eclipse IDE preferably Temenos/lris Nolt MX Mandatory experience incorporating technologies such as geo tracking, maps etc. in mobile apps. Mandatory experience in fulllife cycle development (including signing and release) of Android/l OS native applications. Mandatory experience in managing IOS certifications, licensing and XCODE. Mandatory experience using Android studio. Strong knowledge in SQL, Java Script, C#. Knowledge of Integrations using REST APl's, JSON etc. Experience with Oracle E-Business suite/ Oracle fusion shall be considered as an asset. Working knowledge with Oracle and SQL Server Understanding of hosting and deploying webservices.<br><br>Qualifications<br><br> Bachelor's degree in computer science or engineering. 8+ years of experience in mobility development technologies<br><br>About Malomatia<br><br> ABOUT US <br><br>malomatia is a leading Qatar-based IT services and solutions provider, bringing together top Qatari and international talent to deliver innovative, end-to-end technology solutions that empower clients to achieve their strategic goals.<br><br>Our mission<br><br>Empowering Qatar’s businesses and governments to leap into the digital future with agile, knowledge-driven solutions.<br><br>Our vision<br><br>To become Qatar’s trusted knowledge partner in digital transformation, disrupting industries, shaping the future, and building a world-class tech ecosystem.<br><br>Driving change that makes a real impact<br><br>Since 2008, malomatia has been driving Qatar’s digital transformation through innovative, ISO-certified IT solutions. With expertise across key public and private sectors, we empower the nation’s vision with advanced services in cloud, cybersecurity, AI, and contact center excellence, elevating the role of technology in shaping Qatar’s sustainable future.<br><br>About The Team<br><br>Established in 2008, malomatia is a Qatari leader in IT services and digital transformation. We serve key sectors including Government, Healthcare, Education, Customs, and Transportation, delivering impactful solutions that support national development goals. Powered by a diverse team of skilled Qatari and international IT professionals, we deliver innovative, high-value digital solutions tailored to the unique needs of our clients.<br><br>Our mission is to inspire customers to thrive through digital excellence, and we envision becoming the trusted partner of choice in building a smarter society through technology and talent. We are driven by core values that define our culture and approach: ownership, integrity, empathy, teamwork, transparency, agility, excellence, trust, and innovation.<br><br>Join us in shaping the future of technology in Qatar

Project: Major Offshore Redevelopment Project<br><br>Location: Middle East / Offshore Qatar<br><br>Position Summary<br><br>The Senior Project Engineer is responsible for the planning, preparation, coordination, and execution of offshore installation engineering activities for the Bul Hanine Redevelopment Project and other Middle East offshore projects. The role provides technical leadership and operational oversight to ensure offshore construction and installation activities are executed safely, efficiently, and in accordance with project requirements, company standards, and client expectations.<br><br>Key Responsibilities<br><br>Offshore Installation Engineering & Project Execution<br><br>Lead the preparation, planning, and management of offshore installation activities throughout all project phases. Develop and implement offshore installation methodologies, procedures, work packs, and execution plans. Manage the overall offshore installation engineering scope for Middle East projects, ensuring compliance with project schedules, quality requirements, and HSE standards. Support project execution by providing technical guidance and solutions to offshore installation challenges.<br><br>Project Coordination & Stakeholder Management<br><br>Liaise with clients, subcontractors, marine contractors, and other relevant stakeholders during offshore construction and installation activities. Coordinate and supervise offshore construction activities to ensure safe and efficient project execution. Facilitate communication between engineering, construction, marine operations, procurement, and project management teams.<br><br>Offshore Operations Management<br><br>Monitor offshore construction progress and performance, ensuring activities are completed according to approved plans and schedules. Coordinate the allocation and utilization of offshore resources, including vessels, equipment, materials, and personnel. Support marine spread planning, vessel mobilization and demobilization, and offshore logistics management. Ensure effective resource planning and coordination to achieve project objectives and minimize operational risks.<br><br>Process Improvement & Knowledge Management<br><br>Continuously enhance organizational process assets relating to offshore engineering and construction management. Capture, document, and disseminate lessons learned and best practices from offshore installation projects. Contribute to the improvement of engineering procedures, work processes, and operational standards.<br><br>Project Support<br><br>Prepare technical reports, progress updates, installation execution documents, and project deliverables as required. Perform duties and special assignments delegated by the Project Manager. Support initiatives and activities assigned by the Offshore Operations Center.<br><br>Qualifications & Professional Requirements<br><br>Education<br><br>Bachelor's Degree in Offshore Engineering, Marine Engineering, Naval Architecture, Mechanical Engineering, Civil Engineering, or a related engineering discipline.<br><br>Experience<br><br>Minimum of 10 years of experience in the offshore engineering and construction industry. Proven experience in offshore installation engineering and project execution for major offshore oil and gas developments. Strong expertise in:Offshore construction and installation operations Vessel survey and inspection Marine and maritime management Offshore operations management procedures Offshore project planning and execution Technical Competencies<br><br>Strong understanding of offshore installation methods, heavy lifting operations, marine spread management, and subsea/offshore construction activities. Ability to act as a lead specialist and provide technical leadership on offshore engineering matters. Proficient in project planning, risk assessment, resource management, and construction coordination. Familiarity with international offshore engineering and marine industry standards.<br><br>Language Requirements<br><br>Fluent in English, with strong verbal and written communication skills in an offshore engineering environment. Mandarin Chinese language skills are preferred and considered an advantage.<br><br>Professional Qualifications<br><br>Professional qualification or recognized designation as a Senior Engineer. Relevant certifications related to offshore engineering, marine operations, or project management are advantageous.<br><br>Key Attributes<br><br>Strong leadership and team coordination skills. Excellent problem-solving and decision-making capabilities. Ability to work in a multidisciplinary and multicultural project environment. Strong organizational, planning, and stakeholder management skills. Commitment to safety, quality, and operational excellence.<br><br>Reporting To: Project Manager / Offshore Operations Center<br><br>Employment Type: Full-Time<br><br>Industry: Offshore Oil & Gas Engineering and Construction

We’re Hiring | Senior Security Engineer – F5 & Network Security ???????? Location: Qatar???? Experience: 10+ Years???? Education: Bachelor’s Degree in Computer Science, IT, or related field???? Joining: Immediate Joiners Preferred<br>We are looking for an experienced Security Engineer with strong expertise in F5 technologies, enterprise networking, load balancing, PKI, and high-availability environments.<br>???? Key Requirements:✅ 10+ years of relevant experience✅ 5+ years of Cisco enterprise networking experience✅ Strong knowledge of RIP, OSPF, BGP, MPLS & QoS✅ Hands-on experience with routers, switches, firewalls & load balancers✅ Strong expertise in F5 TMOS, CLI, LTM, GTM, ASM & APM✅ Experience with F5 or Kemp load-balancing solutions✅ Knowledge of Route Domains and complex gateway architectures✅ Strong PKI certificate management skills – CRL, OCSP & CA trust bundles✅ Experience in 24x7, high-availability & high-transaction environments✅ Strong technical documentation and implementation planning skills<br>???? Preferred Certifications:F5-CAF5-CTS – LTMF5-CTS – GTMF5-CTS – APM

<ul><li>Prepare detailed structural designs and calculations</li><li>Review and approve shop drawings</li><li>Coordinate with stakeholders, clients and contractors</li><li>Ensure project compliance with international and local standards</li><li>Provide technical support during project execution</li><li>Responsible for preparing structural designs, reviewing drawings, coordinating with project teams, and ensuring compliance with relevant codes and standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s Degree in Civil/Structural Engineering</li><li>Minimum 10+ years of experience in structural design </li><li>Engineering License (MME/UPDA Grade-A - Preferred)</li><li>Proven experience in PWA Drainage and infrastructure Projects.</li><li>Proficiency in design software (STAAD, Etabs, SAP, AutoCAD)</li><li>Strong analytical and problem-solving skills</li><li>Must be locally available in Qatar with transferable visa/NOC</li><li>Able to join immediately (preferred)</li></ul>

<p><br></p><p>About the Role We are looking for a Civil / Structural Engineer to work under the Programme Management Business Group, providing project management and construction supervision services. The Civil / Structural Engineer will assist the Package Manager and/or Resident Engineer in administering the day-to-day technical and construction supervision activities of the project. He/She will undertake the review of contractor submittals, including shop drawings, method statements, inspection requests, and related engineering documentation. The role includes site inspections, monitoring of construction activities, and verification of works to ensure compliance with approved drawings, project specifications, applicable codes and standards, and quality requirements. The Civil / Structural Engineer will assist in identifying non-conformances and support the implementation of appropriate corrective actions. Based on the format and duties outlined in the civil / Structural Engineer role.</p><h2>Responsibilities</h2><ul><li>Assist the Project Manager and/or Resident Engineer in carrying out contractual responsibilities associated with the project.</li><li>Review civil and structural shop drawings, material submissions, method statements, RFIs, Technical Queries (TQs), and other project-related submissions.</li><li>Assist in the review of civil and structural shop drawings, method statements and corrective actions for compliance with project requirements and applicable codes and standards.</li><li>Monitor construction activities to verify compliance with approved drawings, specifications, quality requirements.</li><li>Perform site inspections, witness testing activities, and attend and carry out the inspection requests submitted by contractors.</li><li>Identify and report construction defects, non-conformances, and deviations from approved documents.</li><li>Coordinate with interface manager and other engineering disciplines to resolve design and construction interface issues.</li><li>Assist in review of contractor progress, quality performance, and compliance with approved methodologies.</li><li>Liaise with contractors, consultants, utility authorities, and project stakeholders as required.</li><li>Provide technical support in resolving civil and structural engineering issues arising during construction.</li><li>Maintain records of inspections, technical comments, observations.</li><li>Support the preparation of technical reports, site instructions, and engineering recommendations.</li><li>Ensure that health, safety, environmental, and quality requirements are implemented within assigned areas of responsibility.</li><li>Perform other responsibilities associated with this position as may be appropriate.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Experience &amp; Qualifications</h2><ul><li>Bachelor s degree in civil or Structural Engineering.</li><li>MME registration is preferred.</li><li>12+ years of experience in civil and structural engineering design review and/or construction supervision of infrastructure, buildings, industrial, commercial, or utility projects.</li><li>Good understanding of reinforced concrete, structural steel, foundations, and associated civil infra works.</li><li>Familiarity with applicable international codes and standards, including ACI, BS EN, ASTM, and QCS requirements.</li><li>Understanding of local authority, utility, QatarEnergy, Kahramaa, and RLIC requirements applicable to civil and structural works.</li><li>Experience in reviewing contractor submissions, shop drawings, method statements, and material approvals.</li><li>Ability to work effectively within multidisciplinary project teams.</li></ul>