Document Controller

Reports To: Lead Cost Engineer Company: Qatar Fabrication Company Location: Doha, Qatar<br>** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **<br>Primary Functions The Project Cost Controller is responsible for the establishment of project budgets, forecasts, controls and reporting. The role will work closely with the relevant project team and with minimal supervision will be responsible for independently applying cost control procedures, best practices and cost analysis on the assigned project<br>Tasks and Responsibilities Setup Cost Breakdown Structure (CBS) in line with the approved / as-awarded project scope and Work Breakdown Structure (WBS). Ensure accurate allocation of project budget and provide control budgets for equipment and material purchase orders, subcontracts, fabrication, fabrication management team and support disciplines. Assist in setting up project specific cost control system based on company internal requirements and project (PMT) requirements. Including but not limited to cost databases and reporting templates/mechanism. Evaluate and analyze cost reports, detect issues and effectively communicate the project’s cost performance, risks and opportunities, issues and concerns to project management team on a regular and agreed periodic basis. Regularly prepare, review and evaluate the project’s Estimate at Completion (EAC) cost forecast - based on remaining scope work, registered expenditures and project commitments. Set up and maintain the project’s change management system in alignment with the QFAB’s approved procedure. Preparation, routing for signature and eventual submission of monthly progress invoice to Client. Provide necessary project data to support project accounting and revenue recognition. Support Lead Cost Engineer as and when required.<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor’s degree in finance, engineering or related discipline<br>Experience & Skills: 3-6 years of relevant work experience, preferably in the Oil & Gas industry. Experience in offshore projects and fabrication

Reports To: Lead Cost Engineer Company: Qatar Fabrication Company Location: Doha, Qatar<br>** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **<br>Primary Functions The Project Cost Controller is responsible for the establishment of project budgets, forecasts, controls and reporting. The role will work closely with the relevant project team and with minimal supervision will be responsible for independently applying cost control procedures, best practices and cost analysis on the assigned project<br>Tasks and Responsibilities Setup Cost Breakdown Structure (CBS) in line with the approved / as-awarded project scope and Work Breakdown Structure (WBS). Ensure accurate allocation of project budget and provide control budgets for equipment and material purchase orders, subcontracts, fabrication, fabrication management team and support disciplines. Assist in setting up project specific cost control system based on company internal requirements and project (PMT) requirements. Including but not limited to cost databases and reporting templates/mechanism. Evaluate and analyze cost reports, detect issues and effectively communicate the project’s cost performance, risks and opportunities, issues and concerns to project management team on a regular and agreed periodic basis. Regularly prepare, review and evaluate the project’s Estimate at Completion (EAC) cost forecast - based on remaining scope work, registered expenditures and project commitments. Set up and maintain the project’s change management system in alignment with the QFAB’s approved procedure. Preparation, routing for signature and eventual submission of monthly progress invoice to Client. Provide necessary project data to support project accounting and revenue recognition. Support Lead Cost Engineer as and when required.<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor’s degree in finance, engineering or related discipline<br>Experience & Skills: 3-6 years of relevant work experience, preferably in the Oil & Gas industry. Experience in offshore projects and fabrication

Additional Information<br><br>Job Number 26103507<br><br>Job Category Rooms & Guest Services Operations<br><br>Location Al Corniche Street, Doha, Qatar, Qatar,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Assign room according to guest request and preferences whenever possible. Pre-register designated guests and prepare key packets. Organize and coordinate check-in/pre-registration procedures for arriving groups. Review/Track/Accommodate requests for room/check-out changes when possible; communicate status to appropriate staff. Confirm reservations and cancellations. Review out-of-order rooms daily. Ensure rates match market codes and document exceptions. Verify and adjust billing for guests. File guest paperwork or documentation. Set up/process all guest check-ins/check-outs. Activate room keys. Secure valid payment. Identify any over-commitments. Perform duplicate reservation checks; block rooms. Run daily reports. Follow up with guests to ensure their requests or problems have been met to their satisfaction. Receive, record, and relay messages accurately, completely, and legibly.<br><br>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Coordinate tasks and work with other departments. Serve as a departmental role model. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance standards. Stand, sit, or walk for an extended period of time. Enter and locate information using computers and/or POS systems. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D. equivalent.<br><br>Related Work Experience: Less than 1-year related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

The Senior Cybersecurity Accreditation Auditor is responsible for delivering day-to-day accreditation services and ensuring that assessments of third parties are conducted in a fair, consistent, and objective manner. The role focuses on evaluating compliance with national and international cybersecurity standards, managing accreditation applications, and maintaining the integrity of the accreditation process. It also supports continuous improvement of accreditation frameworks, tools, and methodologies aligned with national cybersecurity requirements.<br><br>Key Responsibilities<br><br>Responsible for the conduct of the day to day of accreditation services. Maintain detailed and organized records of the accreditation process, ensuring accuracy and completeness. Ensuring that the highest standards of competence and impartiality are maintained, and that consistency is achieved across accreditation activities;Undertake compliance activities against security standards. Operational role, to manage national accreditation scheme applications. Document observations/findings in such a manner that they are clearly understandable and traceable and are based on objective evidence. Develop and maintain accreditation procedures and required tools based on National Information Security Compliance framework. Maintain impartiality, confidentiality and to declare any potential conflicts of interest that might jeopardize an objective assessment as required. Perform periodic surveillance accreditation assessment on Third parties to monitor and review compliance. Develop measurement and compliance mechanisms & tools to monitor improvements. Knowledge of various international standards, regulation, and best practices, (ISO27001, OWASP, PTES, SOC CMM etc.) and implementation experience against at least one. Knowledge of Local Laws & Regulations in different sectors: Cybercrime, PDPPL, e Commerce, etc. Knowledge about national cyber security standards and frameworks (NIA, CSF…) Stay up to date with the latest developments in security, emerging threats, and evolving technology to ensure the accreditation process remains relevant. Manage the external communication during the assessment: from the application till the issue of decision. Act as escalation point of contact for accreditation issues/requests. Team player who collaborates with the team to maintain, improve the accreditation program.<br><br>Requirements<br><br>Education & Experience:<br><br>Bachelor’s degree in Computer Science, Information Technology, Information Systems, Cybersecurity, or equivalent. Minimum 12 years of experience in Information Security, Cybersecurity, Risk Assessment, or Assurance. Hands-on experience in information security auditing, accreditation, or cybersecurity management. Experience in cybersecurity consulting or implementation aligned with national/international standards is an advantage.<br><br>Certifications (Preferred)<br><br>NIA Certified Auditor, CISSP, CISA, CISM, ISO 27001 Lead Auditor or equivalent.<br><br>Technical Skills<br><br>Strong knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, NIA, OWASP, PTES, SOC-CMM, etc.). Understanding of accreditation standards (ISO/IEC 17011, ISO/IEC 17025) and certification processes. Experience in risk assessment and audit methodologies. Knowledge of national cybersecurity laws and regulations (e.g., Cybercrime laws, data protection, e Commerce regulations). Strong awareness of third-party audit and certification practices. Ability to assess security controls and compliance against formal schemes objectively.<br><br>Core Skills<br><br>Strong analytical thinking and problem-solving abilities. Excellent technical report writing and documentation skills. Ability to communicate clearly with technical and senior executive stakeholders. Experience in delivering workshops, training, or knowledge-sharing sessions. Strong attention to detail and ability to work under pressure and tight deadlines.<br><br>Behavioral Competencies<br><br>Strong teamwork and collaboration skills. High level of integrity, impartiality, and professionalism. Ability to manage multiple stakeholders and competing priorities. Strong interpersonal and communication skills. Proactive, self-driven, and able to work independently with minimal supervision.<br><br>Language: English (required)<br><br>Availability: As soon as possible<br><br>The contract duration is 12 months, with the possibility of extension based on departmental requirements.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring for the position of <b>Quality Controller – Piping Department</b> in <b>Qatar</b>. The role requires a qualified <b>CSWIP 3.1 Welding Inspector</b> with practical experience in quality control and NDT inspection of pipes and pipe welds. Candidates with relevant experience in shipyard, oil &amp; gas, or petrochemical environments are encouraged to apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform quality control inspections on piping fabrication and welding activities.<br></li><li>Inspect pipe and pipe welds to verify compliance with applicable quality requirements and approved procedures.<br></li><li>Conduct visual welding inspections and identify welding defects or non-conformities.<br></li><li>Coordinate and review NDT inspection activities associated with piping and welded joints.<br></li><li>Verify piping fabrication work against drawings, specifications, and approved welding procedures.<br></li><li>Monitor welding activities and ensure required quality standards are maintained throughout fabrication.<br></li><li>Maintain inspection records, quality documentation, and reports for completed piping activities.<br></li><li>Coordinate with fabrication, welding, and quality teams to resolve identified quality issues.<br></li></ul>Required Skills<br><ol><li><b>CSWIP 3.1 Welding Inspection</b> — Must be a qualified CSWIP 3.1 inspector with knowledge of welding inspection practices.<br></li><li><b>Pipe &amp; Pipe Weld Inspection</b> — Practical capability in inspecting piping fabrication and welded joints.<br></li><li><b>NDT Inspection</b> — Experience with NDT inspection activities relating to pipes and welds.<br></li><li><b>Quality Control</b> — Ability to monitor piping work and identify quality deviations and non-conformities.<br></li><li><b>Pipe Fabrication</b> — Technical understanding of pipe fabrication processes and associated inspection requirements.<br></li></ol>Preferred Skills<br><ul><li>Experience in shipyard piping projects.<br></li><li>Exposure to oil &amp; gas or petrochemical projects.<br></li><li>Strong knowledge of welding defects and inspection documentation.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>2 years of relevant working experience</b>. Experience should include Quality Control and/or NDT inspections of pipes and pipe welds within the <b>shipyard, oil &amp; gas, or petrochemical industry</b>.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma or NCTV / ITC in Pipe Fabrication<br></li><li><b>Preferred:</b> CSWIP 3.1 qualification<br></li><li><b>Additional:</b> Qualified CSWIP 3.1 Inspector<br></li></ul>Contact Number - 9786888866 <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> &nbsp;The <strong>Cost Controller</strong> is responsible for managing, monitoring, and reducing operational expenses within the hotel, with a primary focus on Food &amp; Beverage (F&amp;B) and retail operations. Working closely with the culinary, purchasing, and finance teams, this role ensures that all goods received, stored, and issued align with the hotel’s budget and profitability goals. The Cost Controller implements strict inventory controls, analyzes variances, and identifies areas of waste to optimize the hotel's bottom line.&nbsp;<br><br><strong><br>1. Cost Control &amp; Menu Engineering<br></strong><br><br><ul><li>Calculate and monitor daily, weekly, and monthly food and beverage cost percentages.<br></li><li>Establish standard recipes, yields, and portion sizes in collaboration with the Executive Chef and F&amp;B Director.<br></li><li>Calculate the potential cost of menus vs. actual costs to identify pricing opportunities or cost leaks.<br></li><li>Conduct regular spot-checks on portion sizes, preparation methods, and waste management in the kitchens and bars.<br></li></ul><strong>2. Inventory Management &amp; Auditing<br></strong><br><br><ul><li>Oversee and coordinate the monthly and perpetual physical inventory counts for all food, beverage, operating supplies, and retail stock.<br></li><li>Investigate and explain significant variances between theoretical stock (system records) and actual physical counts.<br></li><li>Conduct random spot-checks on receiving docks to ensure items match purchase orders regarding quality, quantity, and price.<br></li><li>Monitor store room cleanliness, rotation (FIFO - First In, First Out), and security to prevent spoilage and theft.<br></li></ul><strong>3. Purchasing &amp; System Administration<br></strong><br><br><ul><li>Maintain and update the inventory management system with accurate pricing, recipes, and supplier data.<br></li><li>Review purchasing requisitions and orders to ensure they align with forecasted occupancy and banquet events.<br></li><li>Analyze market trends and supplier prices to negotiate better rates or suggest alternative vendors to the Purchasing Manager.<br></li></ul><strong>4. Financial Reporting &amp; Analysis<br></strong><br><br><ul><li>Prepare monthly cost control reports, variance analyses, and reconciliation reports for the Director of Finance.<br></li><li>Highlight high-cost items, slow-moving stock, and near-expiry items to management with actionable recommendations.<br></li><li>Participate in monthly financial review meetings to discuss budget deviations and cost-saving initiatives.<br></li></ul> </div>

We are seeking an experienced Ticket Controller. The role requires hands-on experience in managing controlled ticket inventory, allocations, distribution records and reconciliation, with a high level of accuracy, confidentiality and accountability.<br>Key Responsibilities<br>Maintain accurate control of ticket inventory throughout the ticketing lifecycle. Verify ticket quantities, categories, references and allocation records. Administer controlled allocations, releases, changes and distribution requirements. Maintain complete and accurate ticket movement and reconciliation records. Identify and resolve inventory, allocation and distribution discrepancies. Maintain ticketing trackers and provide accurate status and reconciliation reporting. Support time-sensitive ticketing requirements while maintaining strict control and accuracy.<br>Job Specs<br>Candidates should have:<br>3–5 years of direct experience in ticket control, ticket inventory, ticket fulfilment, hospitality ticketing or a closely comparable function. Hands-on responsibility for physical and/or digital ticket inventory, allocation, distribution and reconciliation. Experience supporting major sporting events, international events, premium hospitality or high-volume controlled ticketing environments. Experience with VIP, corporate, sponsor, hospitality or other controlled ticket allocations is highly desirable. Strong Excel and ticketing/reporting tracker skills. Demonstrated ability to work with high-volume, detail-sensitive records where allocation errors may have operational or commercial consequences. Strong attention to detail and the ability to work accurately under significant time pressure. Fluency in Arabic is an added advantage.<br>Experience limited to general event operations, ticket sales, box office/customer service, ushering, accreditation, hospitality operations or event staffing will not be considered directly relevant unless the candidate has also held responsibility for ticket inventory control and reconciliation.<br>Education Bachelor’s degree in Business Administration, Finance, Accounting, or a related discipline. Candidates with highly relevant specialist ticketing experience may also be considered.<br>Additional Requirements Currently based in Qatar with a valid Residence Permit (QID). Able to provide a No Objection Certificate (NOC), where required, for the duration of the assignment.<br>Important Note This opportunity is being advertised as part of our talent planning for upcoming requirements. Only shortlisted candidates will be contacted. Submitting an application does not constitute an offer of employment or confirmation of an assignment.

Job Purpose<br><br> JOB DESCRIPTION <br><br>The Financial Controller & Reporting Manager is responsible for delivering accurate and timely consolidated financial information and analysis enabling effective decision making and supporting the company’s strategic objectives. Overseas the development, implementation and monitoring of effective, accurate and integrated accounting systems for relevant financial reporting and auditing accountability. Responsible for overseeing and direction of the corporate accounting and cost controllers (financial reporting) team in conjunction with the CFO. Ensures full applicability and periodic reviews of the finance policies and procedures.<br><br>Key Responsibilities<br><br>Strategic Financial Reporting<br><br> Consolidate all business units’ financial information into the overall corporate reporting to build a composite view of the company including profit and loss, cash flow and balance sheet impacts Participate in the development of the business units’ plans and programs; provide strategic financial input and leadership on decision-making Gather, manage and manipulate data from multiple sources for analysis; identify trends, extract insights and deliver actionable presentations of findings Apply financial expertise with a firm understanding of finance and accounting concepts, superb analytical abilities and strong attention to detail <br><br>Reporting and Communication<br><br> Manage the monthly, quarterly and annual closing processes Develop management reports in collaboration with business and finance teams Ensure timely and accurate business/financial reports and plans; share with all business units to increase financial transparency in management reporting and business-line performance Develop error-free, relevant reporting that includes financial and operating information such as data preparation, report creation and quality control; strive to deliver insight, consistent data and effective visualizations; reports may also include variance analysis to compare actual spending to the forecast, plan and historical levels, with explanations of trends and root causes Monitor operational statistics, reports trends, variances and issues; take appropriate action including proactively notifying business or financial partners/superiors Monitor and report on market changes including macroeconomics and peers/competitors <br><br>Cross-functional Collaboration<br><br> Partner with department leaders to provide financial insights and understand execution variances. Finance partner to company’s business units, leveraging interpersonal skills and building partnerships based on communication, collaboration and value-based relationships <br><br>Process Improvement and Automation<br><br> Leverage ERP and BI systems to enhance data accuracy and accessibility Drive continuous improvement in financial processes, reporting accuracy and timeliness Oversee the automation of reporting and analysis to streamline decision-making processes <br><br>Leadership and Team Development<br><br> Continuously re-assess the department’s skills, competencies and abilities to meet the business needs of the company and drive results through standardization Attract talent by making Financial Reporting a desired career position, drawing talent in and sending it out to the business; establish Finance’s brand for excellence Actively upgrade the organization through professional development, coaching, feedback, mentoring and creating career paths for team members Lead and develop financial managers and analysts <br><br>Qualifications And Experience<br><br> Bachelor’s degree in Accounting, Finance, or related field Professional accounting certification (CPA, ACCA, CMA, or CA) is essential 10+ years of progressive financial experience, including 3–5 years in a leadership or financial control role In-depth knowledge of IFRS and local tax laws and regulations Strong ERP experience (e.g., Oracle Fusion is a must) Data Management expertise <br><br>Key Competencies<br><br> Excellent analytical and strategic thinking skills High integrity and attention to detail Strong business acumen and decision-making capability Effective communication and presentation skills Ability to work under pressure and manage multiple priorities Ability to work in a team environment – and lead it Managerial, leadership and negotiation skills Organizational and analytical skills

Job Purpose<br><br> JOB DESCRIPTION <br><br>The Financial Controller & Reporting Manager is responsible for delivering accurate and timely consolidated financial information and analysis enabling effective decision making and supporting the company’s strategic objectives. Overseas the development, implementation and monitoring of effective, accurate and integrated accounting systems for relevant financial reporting and auditing accountability. Responsible for overseeing and direction of the corporate accounting and cost controllers (financial reporting) team in conjunction with the CFO. Ensures full applicability and periodic reviews of the finance policies and procedures.<br><br>Key Responsibilities<br><br>Strategic Financial Reporting<br><br> Consolidate all business units’ financial information into the overall corporate reporting to build a composite view of the company including profit and loss, cash flow and balance sheet impacts Participate in the development of the business units’ plans and programs; provide strategic financial input and leadership on decision-making Gather, manage and manipulate data from multiple sources for analysis; identify trends, extract insights and deliver actionable presentations of findings Apply financial expertise with a firm understanding of finance and accounting concepts, superb analytical abilities and strong attention to detail <br><br>Reporting and Communication<br><br> Manage the monthly, quarterly and annual closing processes Develop management reports in collaboration with business and finance teams Ensure timely and accurate business/financial reports and plans; share with all business units to increase financial transparency in management reporting and business-line performance Develop error-free, relevant reporting that includes financial and operating information such as data preparation, report creation and quality control; strive to deliver insight, consistent data and effective visualizations; reports may also include variance analysis to compare actual spending to the forecast, plan and historical levels, with explanations of trends and root causes Monitor operational statistics, reports trends, variances and issues; take appropriate action including proactively notifying business or financial partners/superiors Monitor and report on market changes including macroeconomics and peers/competitors <br><br>Cross-functional Collaboration<br><br> Partner with department leaders to provide financial insights and understand execution variances. Finance partner to company’s business units, leveraging interpersonal skills and building partnerships based on communication, collaboration and value-based relationships <br><br>Process Improvement and Automation<br><br> Leverage ERP and BI systems to enhance data accuracy and accessibility Drive continuous improvement in financial processes, reporting accuracy and timeliness Oversee the automation of reporting and analysis to streamline decision-making processes <br><br>Leadership and Team Development<br><br> Continuously re-assess the department’s skills, competencies and abilities to meet the business needs of the company and drive results through standardization Attract talent by making Financial Reporting a desired career position, drawing talent in and sending it out to the business; establish Finance’s brand for excellence Actively upgrade the organization through professional development, coaching, feedback, mentoring and creating career paths for team members Lead and develop financial managers and analysts <br><br>Qualifications And Experience<br><br> Bachelor’s degree in Accounting, Finance, or related field Professional accounting certification (CPA, ACCA, CMA, or CA) is essential 10+ years of progressive financial experience, including 3–5 years in a leadership or financial control role In-depth knowledge of IFRS and local tax laws and regulations Strong ERP experience (e.g., Oracle Fusion is a must) Data Management expertise <br><br>Key Competencies<br><br> Excellent analytical and strategic thinking skills High integrity and attention to detail Strong business acumen and decision-making capability Effective communication and presentation skills Ability to work under pressure and manage multiple priorities Ability to work in a team environment – and lead it Managerial, leadership and negotiation skills Organizational and analytical skills

<p>The Rectification Controller reports to the Forward Maintenance Manager and is a skilled maintenance technician undertaking a range reporting tasks prioritizing and allocating manpower. At this level, the post holder requires an excellent understanding of the Typhoon aircraft systems and reporting processes. The post holder will be responsible for accurate maintenance and updating of ESS State Board progressing estimates and forecasts of aircraft recovery times. Briefing the Part M organization on the state of the Typhoon fleet and the recovery actions.</p><p>Core Activity:</p><ul><li>Provide effective leadership and supervision to team members under your direct supervision</li><li>Ensuring that all maintenance activities are appropriately recorded and airworthiness records are maintained on relevant systems</li><li>Perform Rectifications Control tasking: Accurate maintenance and updating of ESS State Board progressing estimates and forecasts of aircraft recovery times</li><li>Briefing squadron authorised pilot regarding aircraft limitations</li><li>Undertake and complete tasked maintenance &amp; diagnostic activities on an aircraft or components which may include, as appropriate, aircraft ground handling, flight servicing, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test</li><li>Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required.</li><li>Report on any impact to the wider programme</li><li>Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately</li><li>Ensure staff are sufficiently competent and approved for the maintenance tasks allocated to them</li><li>Maintain personal &amp; teams task authorisation for working on aircraft or components in accordance with regulatory requirements</li><li>Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others</li><li>Undertake support tasks within the aircraft or component maintenance facility which are required to maintain compliance with the MOE</li><li>Provide guidance and leadership to the team.</li><li>Develop team members using formal assessment processes.</li><li>Demonstrate sound and comprehensive communication and people management skills in order to exchange complicated information</li><li>Undertake fault evaluation and raise ad hoc work cards for found faults during maintenance</li><li>Ability to scope and carry out independent and vital inspections</li><li>Meet agreed delivery targets at a tactical level through the effective supervision of personnel</li></ul><p>Key Accountabilities:</p><p>Performance indicators</p><ul><li>Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes.</li><li>Prioritises activities within/across teams to maximise efficiency.</li><li>Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate</li></ul><p>Procedure/standards</p><ul><li>Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable.</li><li>Identify and propose changes, as required</li></ul><p>Completion of activities</p><ul><li>Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT / paper based).</li><li>Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel.</li><li>Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process.</li><li>Provide support and guidance to the team</li></ul><p>Safety Management System</p><ul><li>Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team, together with the proactive analysis, mitigation and management of Hazards</li></ul><p>Management Assurance</p><ul><li>Ensure Part 145 team activities are compliant with the Regulatory Governance and Assurance framework.</li><li>Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams.</li><li>Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews.</li><li>Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness</li></ul><p>Statutory/Regulatory &amp; Legislative requirements</p><ul><li>Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework.</li><li>Support the implementation of any regulatory driven changes into the maintenance activities.</li><li>Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO</li></ul><p>Contractual Requirements</p><ul><li>Comply with all applicable contractual requirements</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an Engineering Apprenticeship (including a City &amp; Guilds 2675 or 2661 or equivalent), ideally in Aeronautical Engineering and / or a recognised Engineering Degree from either aeronautical, mechanical, electrical, electronic, avionic or other studies relevant to the maintenance and continuing airworthiness of aircraft</li><li>Requires a minimum of 2 years working at Supervisor level prior to undertaking this role</li><li>On the Job Training Instructional Techniques</li><li>5 years practical experience applying aviation safety standards and operating practices.</li><li>2 years relevant work experience as an operator within the aircraft maintenance component environment.</li><li>Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft or in bays.</li><li>6 months experience on type (in the last two years).</li><li>A comprehensive knowledge of Acceptable Means of Compliance.</li><li>Management training</li><li>Typhoon Avionic or Mechanical Trade Q Course or equivalent</li><li>Human Factors- Standard Course Specification.</li><li>E&amp;PW Awareness- Standard Course Specification.</li><li>ITAR Awareness- Standard Course Specification.</li><li>IT Literate.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>MTBE Process Controller </strong><br> <strong>Location:</strong> Petrochemical Production Facility<br> <strong>Department:</strong> Production – MTBE<br> <strong>Reports To:</strong> MTBE Shift Engineer<br> <strong>Job Summary</strong><br> Responsible for monitoring and controlling MTBE plant operations through the Distributed Control System (DCS) to ensure safe, stable, and efficient production. Supports troubleshooting, emergency response, startups/shutdowns, and process optimization while maintaining compliance with operational and safety standards.<br> <strong>Key Responsibilities</strong><ul><li>Monitor and control plant operations via DCS.</li><li>Maintain process parameters within operating limits.</li><li>Adjust plant load as directed by the Shift Engineer.</li><li>Identify and resolve process abnormalities and deviations.</li><li>Respond to plant emergencies according to SOPs.</li><li>Participate in startups, shutdowns, catalyst loading/unloading, and special operations.</li><li>Review shift logs and conduct effective shift handovers.</li><li>Support troubleshooting and prepare technical inputs/reports.</li><li>Ensure compliance with safety, quality, and environmental requirements.</li><li>Mentor and support junior operators and trainees.</li></ul><strong>Qualifications</strong><ul><li>Diploma in Process Technology, Chemical Engineering, or equivalent.</li></ul><strong>Experience</strong><ul><li>4–6 years of DCS operation experience in MTBE or petrochemical plants.</li><li>Minimum 4 years of independent panel operation experience.</li><li>Experience with MTBE, Oleflex, Butamer, or Ethermax processes preferred.</li></ul><strong>Key Skills</strong><ul><li>DCS Operations</li><li>MTBE Process Knowledge</li><li>Process Troubleshooting</li><li>Emergency Response</li><li>Problem Solving</li><li>Communication</li><li>Attention to Detail</li><li>Safety Awareness</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

Job Description<br><br>Wood is actively seeking to hire Senior Cost Controller role to support future growth in our expanding business. The projects team focusing on delivering across FEED, Pre-FEED, Brownfield, Greenfield scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets. This is a long-term assignment based in Qatar.<br><br>Responsibilities<br><br>Designing the future. Transforming the world<br><br>Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In<br><br>Onshore Oil and Gas<br><br>Offshore Oil and Gas<br><br>What We Can Offer<br><br>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Life Insurance; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death End of Service Gratuity; In line with Qatar Labor Law, upon completion of 1 years’ service employees are eligible for an End of Service benefit of three weeks for every year of service. Medical Insurance: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being. Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence. Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession<br><br>Typical Responsibilities<br><br>The Senior Cost Controller will be responsible for:<br><br>Assist in the development and maintenance of Project Work Breakdown Structure (WBS) and Cost Breakdown Structure (CBS) for specific scopes Assist in the development of project budgets in accordance with the Basis of Estimate including statements of work scope, assumptions, man-hour estimates, narratives and review & comment of client documents Liaise with procurement, finance and time-capture functions, and third parties as required, to support accurate and timely capture of procurement, materials, subcontract and labour manhour costs, allocating costs in accordance with approved project WBSLiaise with engineering, procurement and construction functions, and others as required, to maintain awareness of project activities and their impact on the project budget, schedule and cost forecast. Support the project work approval process in terms of accurate cost code allocation and initial budget set-up and approvals Assist in the development and maintenance of project cost budgets using appropriate software applications Monitor cost commitments and expenditures through all phases of project lifecycle Provide input to project cost performance reports in accordance with project reporting requirements Support the preparation of updates to project cost forecasts Assist in the monitoring and reporting on cost impact of project manpower forecasts Assist in development of project change orders / variations in accordance with engineering and construction change notifications May facilitate and communicate cost and schedule impact of change notifications. Monitor overall project cost performance and contingency drawdown. Attend project meetings as required. Participate in the project cost close-out process. Attend cost & estimate risk analysis sessions as required Participate in Project Controls Compliance and Continuous Improvement Reviews<br><br>Qualifications<br><br>What makes you remarkable? <br><br>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br>Bachelors Degree in a relevant technical or business discipline (or equivalent gained through relevant vocational training and/or industry experience)<br><br>Knowledge, Skills And Experience<br><br>Must have at least 15 years' experience Good computer skills Understanding of project management principles and techniques Be a self-motivated, proactive individual with high achievement drive and initiative, excellent verbal and written communication skills and good organizational awareness. Confidently deliver assigned scopes of work independently / remotely from technical leadership personnel, with minimal guidance and direction<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Additional Information<br><br>Job Number 26114183<br><br>Job Category Rooms & Guest Services Operations<br><br>Location Conference Centre Street, West Bay, Doha, Qatar, Qatar,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Assign room according to guest request and preferences whenever possible. Pre-register designated guests and prepare key packets. Organize and coordinate check-in/pre-registration procedures for arriving groups. Review/Track/Accommodate requests for room/check-out changes when possible; communicate status to appropriate staff. Confirm reservations and cancellations. Review out-of-order rooms daily. Ensure rates match market codes and document exceptions. Verify and adjust billing for guests. File guest paperwork or documentation. Set up/process all guest check-ins/check-outs. Activate room keys. Secure valid payment. Identify any over-commitments. Perform duplicate reservation checks; block rooms. Run daily reports. Follow up with guests to ensure their requests or problems have been met to their satisfaction. Receive, record, and relay messages accurately, completely, and legibly.<br><br>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Coordinate tasks and work with other departments. Serve as a departmental role model. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance standards. Stand, sit, or walk for an extended period of time. Enter and locate information using computers and/or POS systems. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D. equivalent.<br><br>Related Work Experience: Less than 1-year related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.<br><br>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>The Rectification Controller reports to the Forward Maintenance Manager and is a skilled maintenance technician undertaking a range reporting tasks prioritizing and allocating manpower. At this level, the post holder requires an excellent understanding of the Typhoon aircraft systems and reporting processes.</span></span><br></p><br><br><p><span><span>The post holder will be responsible for accurate maintenance and updating of ESS State Board progressing estimates and forecasts of aircraft recovery times.</span></span><span><span>Briefing the Part M organization on the state of the Typhoon fleet and the recovery actions.</span></span><br></p><br><br><b>Core Activity:</b><br><br><ul><li><span><span><span>Provide effective leadership and supervision to team members under your direct supervision&nbsp;</span></span></span><br></li><li><span><span><span>Ensuring that all maintenance activities are appropriately recorded and airworthiness records are maintained on relevant systems</span></span><br></span></li><li><span><span><span>Perform Rectifications Control tasking:</span></span><br><span><span>-&nbsp; Accurate maintenance and updating of ESS State Board progressing estimates and forecasts of aircraft recovery times</span></span><br><span><span>-&nbsp; Briefing squadron authorised pilot regarding aircraft limitations</span></span><br></span></li><li><span><span><span>Undertake and complete tasked maintenance &amp; diagnostic activities on </span><span>an aircraft</span><span> or components which may include, as </span><span>appropriate</span><span>, </span><span>aircraft</span><span> ground handling, flight servicing, </span><span>aircraft</span><span> role changes, </span><span>component</span><span> removals, inspections, repairs, modifications, fault rectifications, </span><span>replacements</span><span> and/or functional/system test</span></span><br></span></li><li><span><span><span>Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme</span></span></span><br></li><li><span><span><span>Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately</span></span><br></span></li><li><span><span><span>Ensure staff are sufficiently competent and approved for the maintenance tasks allocated to them</span></span></span><br></li><li><span><span><span>Maintain personal &amp; teams task authorisation for working on aircraft or components in accordance with regulatory requirements</span></span><br></span></li><li><span><span><span>Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others</span></span></span><br></li><li><span><span><span>Undertake support tasks within the aircraft or component maintenance facility which are required to maintain compliance with the MOE&nbsp;</span></span><br></span></li><li><span><span><span>Provide guidance and leadership to the team. Develop team members using formal assessment processes. Demonstrate sound and comprehensive communication and people management skills </span><span>in order to</span><span> exchange complicated information</span></span></span><br></li><li><span><span><span>Undertake fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance</span></span><br></span></li><li><span><span><span>Ability to scope and carry out independent and vital inspections</span></span></span><br></li><li><span><span><span>Meet agreed delivery targets at a tactical level through the effective supervision of personnel</span></span></span><br></li></ul><span><span><b>Key Accountabilities:</b> </span></span><br><br><br><ul><li><span><span><span><b>Performance indicators</b> – Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate</span></span></span><br></li><li><span><span><span><b>Procedure/standards </b>– Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required</span></span><br></span></li><li><span><span><span><b>Completion of activities</b> – Ensure all Part 145 activities are appropriately </span><span>documented</span><span> and airworthiness records are maintained on relevant systems (IT / paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145   activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team</span></span></span><br></li><li><span><span><span><b>Safety Management System</b> - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team, together with the proactive analysis, mitigation and management of Hazards</span></span></span><br></li><li><span><span><span><b>Management System Assurance</b> – </span></span><span><span>Ensure Part 145 team activities are compliant with the Regulatory Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness</span></span></span><br></li><li><span><span><span><b>Statutory/Regulatory &amp; Legislative requirements</b> – Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, </span><span>EaPW</span><span>, ISO</span></span></span><br></li><li><span><span><span><b>Contractual Requirements</b> – Comply with all applicable contractual requirements</span></span><br></span></li></ul><br><br><span>Requirements<span><span><b>Qualifications/Functional Knowledge:</b></span></span><br><br></span><ul><li><span><span><span><span>Completion of an Engineering Apprenticeship (including a City &amp; Guilds 2675 or 2661 or </span><span>equivalent</span><span>), ideally in Aeronautical Engineering and / or a recognised Engineering Degree from either aeronautical, mechanical, electrical, electronic, </span><span>avionic</span><span> or other studies relevant to the maintenance and continuing airworthiness of aircraft</span></span><span><span> Requires a minimum of 2 years working at Supervisor level prior to undertaking this role</span></span><br></span></span></li><li><span><span><span><span>On the Job Training Instructional Techniques</span></span><br></span></span></li><li><span><span><span><span>5 years practical experience applying aviation safety standards and operating practices. 2 years relevant work experience as an operator within the </span><span>aircraft</span><span> maintenance </span><span>component</span><span> environment. Demonstrating breadth of experience, currency &amp; recency via a </span><span>Log Book</span><span> capturing skills, </span><span>knowledge</span><span> and authorities for working on Aircraft or in bays. 6 months experience on type (in the last two years). A comprehensive knowledge of Acceptable Means of Compliance. Management training</span></span><span><span> Typhoon Avionic or Mechanical Trade ‘Q’ Course or equivalent</span></span><br></span></span></li><li><span><span><span><span>Human Factors- Standard Course Specification.</span></span><br></span></span></li><li><span><span><span><span>E&amp;PW Awareness- Standard Course Specification.</span></span><br></span></span></li><li><span><span><span><span>ITAR Awareness- Standard Course Specification.</span></span><br></span></span></li><li><span><span><span><span>IT Literate.</span></span><br></span></span></li></ul><span><span><b>​</b></span></span><br><br><br> </div>

Job Description<br><br>Lead the management of information and document control, along with digital systems delivery developed during the execution of business through its entire lifecycle.<br><br>Provide leadership and direction to information management, document control, data management and engineering systems administration as well as the digitalization for the projects being implemented.<br><br>Provide thought leadership to the information management function, ensuring progressive and modern practices that embrace the digitisation transformation, use technology effectively and support the business strategy.<br><br>Responsibilities<br><br>Designing the future. Transforming the world<br><br>Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In<br><br>Onshore Oil and Gas<br><br>Offshore Oil and Gas<br><br>What We Can Offer<br><br>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Life Insurance; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death End of Service Gratuity; In line with Qatar Labor Law, upon completion of 1 years’ service employees are eligible for an End of Service benefit of three weeks for every year of service. Medical Insurance: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being. Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence. Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession<br><br>Responsibilities<br><br>Responsible for participating in the creation, maintenance and enforcement of IM strategy, standards and procedures and assures compliance. Responsible for ensuring technical competence standards and for monitoring competence levels, and for overall management and development of Information Management, Document Control,Data Management & Record Management. Responsible for establishing the functional requirements for Information Management Systems and Tools and working with IT and software vendors to ensure they are met. Work within the Project Delivery organization to ensure IM & DM procedures are consistent with the overall execution strategies. Lead the implementation of Information Management & Document Management Systems and Tools Responsible for the development and implementation of workshare strategies within Information Management & Document Management Advise on the technical direction, processes and supporting technologies that will enable the successful delivery of IM, DM and related digital services. Responsible for engaging with the project management to coordinate and ensure all day-to-day management and operational decisions are met and that solutions meet the customer expectations, leading to successful project delivery Identify and assess principal execution risks for projects in IM, DM and digital systems and ensure that these are being monitored and managed Ensure that the digital transition maintains high ethical standards and social responsibility wherever it does business<br><br>Qualifications<br><br>What makes you remarkable? <br><br>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br>Degree qualified or equivalent<br><br>Job Specific Experience<br><br>Significant experience and competence in operationally focused senior management roles within a complex international organisation Deep understanding and knowledge of relevant markets Ability to provide leadership to multination team members and close coordination with multiple disciplines across a complex organisation Proven ability to establish strong and appropriate relationships with the leadership team, customers, staff and all stakeholders Proven record of implementing and embedding a safety culture Demonstrated experience in integrating and coordinating diverse areas of management. Ability to influence, enable, and drive company performance and culture through excellent communication<br><br>Knowledge of<br><br>Cutting edge information and document management, digital transformation trends, new to market and in development, and to be released possibilities Recent Knowledge of the growth and advancement of Digital Transition within industry. Current and nascent technologies related to the IM, DM and digital sectors General familiarity with related industry standards & initiatives e.g., CFIHOS, BIM ISO19650 etc. Strategic commercial and business models Corporate governance and decision making Ability to manage relationships effectively, across different cultures Detailed awareness of external factors, competitors and their impact on the strategy & success Changing regulatory and economic environment<br><br>Personal Attributes<br><br>Connect and establish effective, cross-cultural working relationships with all levels of the organisation and externally Deal effectively with a wide range of stakeholder groups Create an environment that encourages open discussion and feedback with customers and stakeholders Effective in verbal, visual and written communication at a strategic level Forward thinking and able to see the bigger picture Publicly supports regional decisions and ensures the desired culture is embedded Creative in the achievement of stretching objectives; does not accept failure easily Customer focused and goal-driven Work effectively across various regions, driving a global and one Wood mind-set<br><br>Leadership<br><br>Is a champion and role model for ethical behaviour and compliance with applicable laws and policies Maintains a continued alignment with overall corporate policy, strategy and direction Responsive to customer needs whilst ensuring the Company operates with the utmost integrity, in line with Code of Conduct, Company values and all applicable laws and policies Facilitate open and effective communication to optimise delivery of objectives, maximise team performance and achieve continuous performance improvement, working closely with other areas of operation out with assigned country/region to promote and enhance collaboration Generate team spirit, enthusiasm and passion and pursue the eradication of unproductive practices and negative mind-sets to create a vibrant culture of positive thinking and attitudes Overall accountability for effective recruitment, selection and retention of talent within assigned area Identify and support development of talent, effective performance and capability management of teams and direct reports, dealing with underperformance in a prompt, professional manner Responsible for ensuring employees within remit are competent to carry out assigned duties Assume directorship appointments of legal entities within remit, executing Directorship accountabilities and responsibilities<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><span><span>Prepare, format, review, and maintain technical and administrative documents, reports, correspondence, and records.</span><br></span></li></ul><p><span>•</span><span> Coordinate meetings, schedules, project activities, agendas, minutes, and follow-up actions.</span><br></p><br><p><span>•</span><span> Maintain organized physical and electronic filing systems, including confidential records.</span><br></p><br><p><span>•</span><span> Support IT hardware, PC, peripheral equipment upgrades, repairs, installations, and contract-related activities.</span><br></p><br><p><span>•</span><span> Respond to user queries and support the preparation of IT knowledge-base articles, guides, and training materials.</span><br></p><br><br><span>Requirements</span><p><b><b>Minimum 12 years</b></b><span>*</span><span> of relevant experience working within an<b> IT environment</b> is preferred.</span><br></p><br><p><span>•</span><span> Strong proficiency in Microsoft Office Suite and general computer applications.</span><br></p><br><p><span>•</span><span> Good knowledge of office administration, documentation, and record-management procedures.</span><br></p><br><p><span>•</span><span> Strong organizational, written communication, numerical, and basic statistical skills.</span><br></p><br><p><span>•</span><span> Fluency in written and spoken </span><span>*</span><b><b>English; Arabic</b></b><span>*</span><span> language skills are preferred.</span><br></p><br><br><span>BenefitsLongterm Project<br><br></span><br> </div>

Primary Purpose Of The Job<br><br>The role focuses on preparing and managing departmental budgets, monitoring spending, providing financial reports, and ensuring effective cost control throughout the year.<br><br>Required Experience And Skills<br><br>4 years in an advanced preferably in budgeting, costing, planning related activities in the oil and gas industry, including at least 3 years in a commercial position related to cost & planning.<br><br>SAP knowledge is preferred.<br><br>Skilled in the use of PC with hands on knowledge of various software like MS Word, MS Excel & BI analytics.<br><br>Educational Qualifications<br><br>Bachelor of Business or Finance or Accounting.<br><br>CIMA, CPA or equivalent certification or Advanced Professional Accounting, Cost Engineering and Systems Analysis are recommended.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li> Conduct quality testing and assurance for all repairs to ensure work is completed in line with job orders.</li><li> Monitor and ensure that quality standards are implemented in all areas of activity and report any deviation upon occurrence.</li><li> Conduct detailed final overall inspection for all vehicles prior to delivery.</li><li> Whilst testing and inspecting vehicles note any additional work required and report to Service Reception accordingly</li><li> Maintain records of quality inspections and tabulate workshop quality levels monthly making recommendations for actions required to improve quality levels</li><li> Ensure Health, Safety and Environmental standards are maintained throughout the site within legal requirements and in line with Company policy. Report any out-of-line conditions to the Branch Service Manager. This also applies to personnel performing company business off site. Maintain records of any out of line conditions showing corrective action taken, with dates.</li><li> Perform other duties as assigned by immediate Manager.</li></ul><p> </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Dealership Experience </p><p>Must have Qatar Driving License</p></div>

Number of Vacancies: 7<br><br>Minimum Requirements<br><br>The supplied instructions do not specify whether this position should follow the Foreman, Supervisor or Engineer education requirement.<br><br>Experience: Minimum five years of GCC experience in Oil & Gas projects.<br><br>Employment Details<br><br>Airfare: Yearly Food, accommodation and transportation will be provided by the company.

Company Description Fourth Dimensions Construction is a growing construction company with projects focused on industrial and commercial facilities in Doha, Qatar. The organization emphasizes safety, quality workmanship, and timely project delivery across its operations. Team members work in a collaborative environment alongside experienced tradespeople and supervisors. The company supports professional development and encourages adherence to international safety and construction standards.<br>Role Description This is a full-time, on-site role based in Doha, Qatar for a Fire Watcher and Pipe Fitter. The Fire Watcher and Pipe Fitter will monitor hot work areas to ensure compliance with fire safety procedures, maintain fire watch during welding and cutting activities, and respond promptly to potential hazards. Day-to-day tasks include installing, assembling, and maintaining piping systems, assisting welders, and preparing pipes and fittings using appropriate tools and techniques. The role involves reading and interpreting drawings and specifications, inspecting work for quality and leaks, and coordinating with site supervisors and other trades to meet project timelines. The individual will follow all safety protocols, participate in toolbox talks, and ensure a clean and organized work area.<br>Qualifications<br> <br>Candidates should possess skills in pipe handling and Pipefitting for installation, assembly, and maintenance of piping systems. Candidates should possess skills in Welding and TIG Welding to support hot work and join pipes and fittings as required. Candidates should possess knowledge of Steam systems and related piping to work safely with pressurized lines and industrial applications. Experience in fire watch duties, hot work safety procedures, and hazard identification on construction or industrial sites. Ability to read and understand technical drawings, isometric sketches, and piping layouts. Strong awareness of occupational health and safety standards, including use of PPE and compliance with site rules. Physical ability to work in outdoor and industrial environments, including confined spaces and elevated areas, as required by the role. Previous experience as a pipe fitter or fire watcher in construction, industrial, or oil and gas projects is preferred.