وظائف مراقب جودة في قطر

Contribute to enhancing the institutional effectiveness and quality assurance system at the Institute by supporting institutional and programmatic accreditation processes, providing necessary data, evidence, and reports, and monitoring the implementation of quality standards, thereby contributing to continuous improvement, increasing institutional performance efficiency, and achieving the Institute's strategic goals.

Implement, and maintain Quality Management System (QMS) specific to the project. Conduct inspections, testing, and audits of civil site activities. Collaborate with engineering, procurement, and construction teams to ensure quality deliverables and address non-conformances promptly. Prepare and maintain inspection test plans (ITPs), quality control plans, and checklists specific to civil activities. Coordinate with vendors and subcontractors to verify supplier quality and compliance with contractual requirements. Analyze quality data and generate reports, non-conformance reports (NCRs), and corrective action plans. Support root cause analysis and corrective/preventive action implementation for quality issues. Ensure compliance with HSE standards related to site activities. Participate in project quality meetings and interface with quality personnels and third-party inspectors. Maintain quality documentation and ensure proper records control per project and corporate standards Familiar with QCS 2014/2024, shell DEP's and QPAD requirements

Job Description<br><br>Note: This profile provides a market aligned view of this job’s typical core requirements, informed by Korn Ferry’s Success Profile methodology, and will evolve over time.<br><br>Please note, the grade and content for this Job may be subject to change. This will be reviewed and updated in system by the end of Q4. Delivers experienced quality guidance that supports effective delivery and consistent functional practice. Executes a wide range of quality activities that strengthen compliance, assurance and operational reliability. Reinforces adoption of GHD quality systems through accurate application of standards and tools. Develops capability by expanding advisory scope and strengthening professional judgement.<br><br>Responsibilities<br><br>Responsibilities describe the typical accountabilities and scope of work for this job, while recognising that individual objectives are set with the manager and may vary over time.<br><br>Audit Compliance: Manage a portfolio of audit assignments. Ensure that the team plans and delivers audits that cover identified risk areas, and that appropriate corrective actions are agreed on with auditees. Resolve issues arising from audits and refer serious or contentious issues to the audit program leader. Document Preparation: Edit document in line with organizational style guidelines and prepare information for publication. Information and Business Advice: Provide specialist advice on the interpretation and application of policies and procedures, resolving queries and issues and referring very complex or contentious issues to others. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an in-depth understanding of technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Quality Assurance Testing: Validate and interpret complex test data to evaluate and recommend the suitability of nonstandard materials or components. Quality Assurance Testing Design: Develop and validate complex new test methods and procedures for a product or operations segment, incorporating new technologies and meeting changing organizational, customer, and/or regulatory requirements. Quality Management System: Contribute to the identification and evaluation of current policies and business processes that are in the scope of the quality management system (QMS); contribute to the design of the QMS; provide specialist quality management input to the drafting of new policies and procedures and the design of business processes; contribute to the quantification of the costs and business benefits of change. Work Scheduling and Allocation: Develop short- or medium-term work schedules in order to achieve planned commitments. Approve overtime or use additional resources as needed.<br><br>Competencies<br><br>Competencies describe the observable behaviours that differentiate effective performance in this job and guide expectations, feedback, and development discussions.<br><br>Financial Acumen – Interprets and applies key financial indicators to make better business decisions. For example, swiftly assembles and fluently interprets the financial data and metrics relevant to the role. Draws rich insights from financial and quantitative data. Adheres to relevant budgetary guidelines. Instills Trust – Gains the confidence and trust of others through honesty, integrity, and authenticity. For example, demonstrates integrity, upholding professional codes of conduct. Instills trust by following through on agreements and commitments despite competing priorities and by being honest and straightforward. Manages Complexity – Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. For example, looks at complex issues from multiple angles; explores issues to uncover underlying issues and root causes; sees the main consequences and implications of different options. Optimizes Work Processes – Knows the most effective and efficient processes to get things done, with a focus on continuous improvement. For example, uses metrics and benchmarks to monitor accuracy and quality. Takes steps to make methods productive and efficient. Promptly and effectively addresses process breakdowns. Situational Adaptability – Adapts approach and demeanor in real time to match the shifting demands of different situations. For example, sees even subtle cues to adapt; deploys a wide range of behaviors to stay effective. Exemplifies flexibility and resourcefulness; responds deftly to a variety of challenges and situations. Tech Savvy – Anticipates and adopts innovations in business-building digital and technology applications. For example, investigates technologies to learn some cutting-edge best practices. Uses digital/social media to benefit the team and add value to the work being done; understands how to avoid misuse of these tools.<br><br>Skills<br><br>Skills reflect the technical, professional, and functional capabilities required to perform the job effectively at the expected level, and guide assessment and development.<br><br>Assessment – Works at an advanced level to assimilate and understand data and information from various sources in order to draw appropriate conclusions and make relevant recommendations. Typically works independently and provides guidance. Auditing – Works with full competence to conduct audits, identifying exceptions, and developing specific solution or recommendations. Typically works without supervision and may provide technical guidance. Compliance software – Works with full competence to automate compliance tasks, maintain regulatory compliance, and generate reports for auditing purposes. Typically works without supervision and may provide technical guidance. Data Collection and Analysis - Quality Assurance – Works at an advanced level to collect, process, and analyze quality assurance data to ensure product and service excellence. Typically works independently and provides guidance. Data Management Techniques - Quality Assurance – Works at an advanced level to collect, analyze, and interpret quality data from various sources to identify trends, monitor defect rates, assess process effectiveness, and ensure adherence to quality standards and procedures. Typically works independently and provides guidance. Planning and Organizing – Works at an advanced level to plan, organize, prioritize and oversee activities to efficiently meet objectives. Typically works independently and provides guidance. Policy and procedures – Works at an advanced level to monitor, interpret and understand policies and procedures and ensure their alignment with organizational strategies and work objectives. Typically works independently and provides guidance. Procurement Quality Management – Works at an advanced level to design, implement and manage procurement quality control systems. Typically works independently and provides guidance. Project Quality Management – Works at an advanced level to establish and manage the quality policies, procedures, and responsibilities for a project or program that satisfies the needs for which it was undertaken. Typically works independently and provides guidance. Project Testing – Works at an advanced level to design, create and administer the test scripts associated with the delivery of the project, ensuring that the requirements are being met from a functional, design and user experience perspective. Typically works independently and provides guidance. Quality Assurance Methodologies – Works at an advanced level to implement rigorous quality assurance processes and procedures to ensure compliance with regulatory standards and adherence to good practices. Typically works independently and provides guidance. Quality System Management – Works with full competence to manage the quality management system. Typically works without supervision and may provide technical guidance. Requirements Creation and Verification – Works at an advanced level to create the rules for requirements and design quality, perform verification activities, and maintain quality control. Typically works independently and provides guidance. Review and Reporting – Works at an advanced level to create reports, and review reports created by others, for various audiences as relevant, in a lucid and effective manner, keeping in mind the purpose of reports. Typically works independently and provides guidance. Systems and Tools - Quality Assurance – Works at an advanced level to effectively utilize quality management software, testing tools, and other relevant technologies to identify, track, and resolve defects, ensuring adherence to quality standards and procedures. Typically works independently and provides guidance.<br><br>Education<br><br>Bachelor's Degree or Equivalent Level<br><br>Experience<br><br>General Experience: Substantial general work experience together with comprehensive job related experience in own area of expertise to fully competent level. (Over 6 years to 10 years) Managerial Experience: Basic experience of coordinating the work of others (4 to 6 months)

Project Overview<br><br>Join a high-profile, large-scale oil and gas infrastructure project in Qatar.<br><br>The project is long-term and requires immediate deployment.<br><br>Key Responsibilities<br><br>Assist the QA/QC Manager with daily quality operations. Support procedure audits and resolve non-conformities. Act as a liaison between site inspectors, construction teams, and client quality representatives.<br><br>Candidate Requirements<br><br>Relevant trade, technical, or professional certificates are strictly required. Gulf region experience is highly preferred. TR and QE approvals are required for applicable supervisory and technical positions. WQT or trade skill assessment is mandatory only for applicable craft roles.<br><br>Compensation And Benefits<br><br>Pay ranges from QAR 7,595.31 to QAR 24,803.60 per month. Salary is competitive and negotiable based on experience. The company provides free food, accommodation, and transportation. The role offers long-term project stability and immediate departure processing.<br><br>Job Type<br><br>Full-time role on a long-term project.<br><br>Work Location<br><br>Work location is in person in Qatar.

Job Summary The QA/QC Engineer ensures that work / projects are delivered based on good work practices and project specifications to guarantee completion of work within the given time limits with quality of work that meets or even exceeds the client’s expectations by implementing international quality standards plans and quality procedures in all the construction activities. Assists in developing the Project Quality Management System by establishing procedures, plans and work instruction as needed.<br><br>Job Responsibilities 1Assist Project QA/QC Manager or Sr. QA/QC Engineer on implementing quality management system at site as per approved Project Quality Plan and IMS Procedures. Prepare work inspection requests (WIR) for each construction activity and submit to consultant to ensure it covers all the construction activities done on site. Check all incoming materials as per project specifications and approved material submittals. Monitor WIRs and test reports and update the Quality Manager and site team on the status. Establish and monitor control of QA/QC Plans, Method of Statements and Test Plans before commencement of the project and implementing it during the project in order to meet the project quality requirements and client’s expectations. Ensure that control of document procedures is implemented and all approved documents from consultant are distributed through the document control system. Check Inspection and Test Plan if available and all method statements and test plan are submitted for the consultant as per the approved ITP plan. Prepare work inspection request (WIR) for each construction activity and submitted to consultant to ensure it covers all the construction activities done on site.<br>Job Responsibilities 2Verify if work inspections are carried out as per the plan and advice the construction team for the corrective action to avoid the rejection of work and emphasizes that work inspection shall passed during the first submission with 90% rate. Ensure all incoming materials are checked as per the project specifications and approved material submittals. Inspect all materials internally before offering inspection to the consultant, raising the NCR to the supplier in case the substandard material is delivered, the record of inspection shall be included in the month Quality report. Monitor WIR and test reports and update Management, Construction Team, Planning, Quantity Surveyors and Cost Control Departments about the current job status. Maintain the records of all work and material inspection and provide the data in the weekly progress meetings. Record all test results and ensure it's availability for steel along with the mill certificates. Make sure that logs are available along with the test reports for all types of test as per the approved testing matrix. Checks concrete pour cards are maintained on daily basis and copy is provided to the storekeeper to raise the SRV and to the cost controller/QSSupport the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies.<br>Job Knowledge & Skills Knowledge of work related standards, specifications, and quality systems such as: ISO 9001, QCS, SMACNA,ASHRAE, NFPA, etc.). With enough technical experience on dealing with various QC issues. Knowledge of localemployment laws/regulations sufficient to analyze proposed policies. In-depth knowledge on the Quality Management System (QMS) or Integrated Management System (IMS) ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.<br>Education Profesional degree in MMUP Engineer Registration (UPDA) or Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE). Bachelor's Degree in any related field or Civil Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced <strong>QA/QC Engineer</strong> to support quality assurance and quality control activities for a major infrastructure programme in Qatar.</p><br><br><p>The successful candidate will be responsible for monitoring project quality requirements and ensuring that engineering and construction activities comply with approved specifications, procedures, standards and contractual requirements.</p><br><br><p><strong>Key Responsibilities</strong></p><br><br><ul><li>Implement and monitor project QA/QC requirements.</li><li>Review Project Quality Plans, ITPs, method statements and quality procedures.</li><li>Conduct and coordinate site inspections.</li><li>Review material approvals, test results and inspection documentation.</li><li>Raise, monitor and close <strong>NCRs</strong> and corrective/preventive actions.</li><li>Maintain quality records, registers and supporting documentation.</li><li>Conduct quality audits and monitor contractor compliance.</li><li>Coordinate with contractors, consultants, laboratories and client representatives.</li><li>Monitor workmanship and ensure compliance with approved drawings/specifications.</li><li>Support testing, commissioning and project handover documentation.</li></ul><p><strong>Candidate Requirements</strong></p><br><br><ul><li>Bachelor's degree in Civil Engineering or relevant engineering discipline.</li><li>Significant QA/QC experience within <strong>civil engineering and infrastructure projects</strong>.</li><li>Strong understanding of <strong>ISO 9001 Quality Management Systems</strong>.</li><li>Experience with ITPs, NCRs, inspections, audits, method statements and material approvals.</li><li>Roads, drainage, utilities or major public infrastructure experience preferred.</li><li>Qatar/GCC experience highly advantageous.</li><li>Relevant QA/QC certifications advantageous.</li><li>Strong reporting, documentation and stakeholder coordination skills.</li></ul> <br><br> </div>

Job Description<br><br>Inspector - QA/QC (Mechanical)<br><br>Responsibilities<br><br>Inspector - QA/QC (Mechanical)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Perform inspection and surveillance activities for painting, coating, corrosion protection</li> <li>Verify surface preparation activities, including abrasive blasting, cleanliness, surface profile measurements, soluble salt testing, and environmental condition monitoring prior to coating application</li> </ul><br><ul> <li>Conduct inspections of external and internal coating systems for pipelines, piping, structural steel, tanks, vessels, and process equipment throughout all stages of construction and installation</li> <li>Witness and monitor coating application activities, ensuring proper application of primer, intermediate, and finish coats in accordance with approved coating procedures and manufacturer recommendations</li> <li>Perform and witness coating quality control tests, including Wet Film Thickness (WFT), Dry Film Thickness (DFT), adhesion testing, holiday detection testing, hardness testing, and visual inspections to verify coating integrity and compliance</li> <li>Carry out holiday testing of coated surfaces, internal linings, and pipeline coating systems using approved methods and calibrated equipment to ensure coating continuity and defect free application</li> <li>Inspect hot and cold insulation systems for piping, equipment, and vessels, including verification of insulation materials, vapor barriers, cladding installation, weatherproofing, and insulation-coating interfaces</li> <li>Perform inspections of Passive Fire Protection (PFP) and fireproofing systems, including material verification, surface preparation, thickness measurements, reinforcement installation, curing requirements, and final acceptance inspections</li> <li>Witness and evaluate Procedure Qualification Testing (PQT) and coating qualification trials to validate coating system performance and compliance with project and client requirements</li> <li>Review and verify coating procedures, insulation procedures, fireproofing procedures, method statements, inspection and test plans (ITPs), and quality control documents for compliance with contractual and technical specifications</li> <li>Conduct material receiving inspections and verify that coating, insulation, and fireproofing materials are approved, properly stored, within shelf-life limitations, and supported by valid certificates and manufacturer documentation</li> <li>Participate in painting, coating, insulation, and fireproofing subcontractor pre-qualification audits, assessing technical capabilities, personnel qualifications, quality management systems, equipment availability, and past project performance</li> <li>Coordinate inspection activities with contractors, subcontractors, third-party inspectors, and client representatives to ensure timely execution of inspection and testing requirements</li> <li>Review and validate inspection reports, test records, calibration certificates, material certificates, and quality dossiers to ensure completeness and compliance with project requirements</li> <li>Identify, document, and report non-conformities, monitor corrective actions, and verify satisfactory close-out of quality issues</li> <li>Ensure all inspection, testing, and monitoring equipment are calibrated, maintained, and suitable for intended use</li> <li>Maintain accurate inspection records and support implementation of the Project Quality Management System, applicable industry standards, and HSE requirements throughout project execution</li> </ul><br><ul> <li>Mechanical/Metallurgical/Materials or equivalent Engineering degree, technical diploma and/or 15+ years' experience in quality Control in multi-disciplined construction environment. Preferably having formal training in QC and membership with internationally recognized chartered or other professional institution</li> <li>BGAS Grade 2 / NACE Level 2 Painting Inspector certification or other equivalent is a must</li> <li>Preferably CSWIP 3.2 / AWS-SCWI Sr. Welding Inspector and ASNT NDT Level II Certification</li> <li>Other equivalent certifications from internationally recognized organizations can be reviewed and maybe accepted</li> <li>Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in QA/QC inspection experience in painting, coating, corrosion protection, and preservation activities within Oil &amp; Gas, Petrochemical, or Industrial construction projects.</li> <li>GCC experience is preferred</li> <li>Hands-on experience in inspection of protective coating systems for piping, tanks, structural steel, static equipment, and rotating equipment</li> <li>Familiarity with international coating standards and inspection requirements, including NACE/AMPP, SSPC, ISO, ASTM, and project specifications (i.e. Shell DEPs)</li> <li>Ability to work effectively with contractors, inspectors, and project stakeholders in a multidisciplinary and multicultural environment</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

Primary Purpose Of The Job<br><br>This position is responsible for providing expert quality management leadership and technical guidance across offshore projects, with full accountability for the effective implementation and continual improvement of the Quality Management System (QMS) within the Offshore Projects Department.<br><br>The role ensures compliance with Qatar Energy standards, Shell DEP requirements, project specifications, and applicable international codes and standards throughout all project phases. The successful candidate will oversee the development, implementation, and monitoring of Project Quality Plans (PQPs) to ensure quality objectives are achieved and regulatory and contractual requirements are consistently met.<br><br>Required Experience And Skills<br><br>Minimum 15 years of QA/QC experience in the oil and gas industry, including significant offshore project experience. At least 5 years' experience in a similar Senior QA/QC Engineer or equivalent position. Qualified ISO 9001 Lead Auditor; additional quality-related certifications are preferred. Strong knowledge of quality management systems, international codes, standards, and QA/QC best practices. Experience across the full project lifecycle, including engineering, procurement, construction, and commissioning. Working knowledge of equipment and material inspection, certification processes, and associated QA/QC requirements. Sound understanding of offshore construction, welding, and non-destructive examination (NDE) techniques. Excellent English communication skills, both written and spoken.<br><br>Educational Qualifications<br><br>Bachelor's degree in Engineering from a recognized university, preferably Mechanical Engineering. Master's degree in a relevant discipline is preferred. Membership of a recognized professional engineering institution is advantageous. Chartered Engineer status or equivalent professional accreditation is desirable.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Lead and manage multi-discipline QA/QC Team (QC Engineers and Inspectors) within the Department and ensure that the Inspection Test Plans and procedures are in place and adhered to throughout the project life cycle.</li> <li>Guide departmental staff and Project Team on various activities related to latest version of ISO 9001 Standard, QMS system documentation and certification requirements.</li> </ul><br><ul> <li>Promote a culture of continual improvement in quality practices and conduct quality training sessions for site personnel and subcontractors.</li> <li>Support incident investigation and root cause analysis related to quality failures impacting safety or performance.</li> <li>Prepare the Departmental &amp; Project QMS (Quality Management System) documentation in accordance with Company requirements.</li> <li>And further Manage and follow-up on implementation of QMS compliance requirements in Contracts.</li> <li>Prepare Project Quality Plan (PQP), KPIs and ensure the alignment of Contractor's PQP / KPIs with that of Company's. Coordinate and ensure implementation of QMS compliance requirements during all phases of the projects by Project teams and Contractors and submit necessary reports /data on monthly / quarterly basis.</li> <li>Participate in pre-qualification of Contractors/Sub-Contractors and Vendors, as required, monitor, and enforce compliance with ISO 9001/Company Quality standards.</li> <li>Participate in technical bid evaluation of the Bidders to ensure that Company quality requirements are included, addressed, and understood.</li> <li>Review the Scope of Services (SOS) and Scope of Work (SOW) and ensure that Company quality and technical requirements are incorporated which include Contractor/Supplier's QA/QC and relevant engineering and construction deliverables and any other Technical / Company System documents.</li> <li>Review and Approve Contractors'/Vendors' QA/QC documentation/deliverables for engineering, procurement, and construction phases, including welding and testing procedures.</li> <li>Review and respond to technical queries and technical deviations regarding welding and non-destructive testing.</li> <li>Review Contractor/Supplier's engineering and construction deliverables with specific emphasis to QA/QC and coordinate with relevant engineering discipline specialists on issues related to materials/corrosion/special processes etc; to enforce compliance to contract requirements.</li> <li>Ensure Deviation and non-conformance control systems are implemented to meet the departmental compliance requirements.</li> <li>Verify the resolution of deviations related to corrective and preventive actions and proper closure of NCRs and CARs.</li> <li>Surveillance and oversee the quality of project Construction works by visiting all project sites, attending weekly/monthly meetings with contractor, monitor the site QC inspector's functioning etc.</li> </ul><br><ul> <li>Bachelor's Degree in Engineering (preferably Electrical, Instrumentation, Controls Engineering or related field) or higher educational qualification in engineering from internationally recognized Universities.</li> <li>IRCA Certified QMS Lead Auditor Certification or similar.</li> <li>ASNT Level-II Certifications in RT/MT/PT/UT is a plus.</li> <li>Professional certification / affiliation with internationally recognized Quality organizations like CQI or ASQ or similar is desirable.</li> <li>Minimum 15 years of relevant experience (Minimum of five (5) years lead experience) in Oil &amp; Gas Industry as part of an internationally recognized EPIC contractor or end user/owner organization, covering large-scale solar projects or similar nature projects.</li> <li>Extensive experience in large scale solar (Photovoltaic) construction projects and strong background in quality management systems.</li> <li>Brownfield experience is a plus.</li> <li>Hands on working experience in major EPIC projects with involvement in all phases of EP-I-C from working level to independently managing / Heading QA/QC function, with technical expertise in a core discipline.</li> <li>Working knowledge of using and interpreting Shell DEPs, International Codes / Standards (IEC, NEC, ASME, ASTM, NACE, AWS, API, BS, ISO and Local Regulations) related to the job and industry.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior QA/QC Manager leads in the development of strategies and processes of QA/QC department by implementing policies, procedures, regulations of quality control work and supervisory techniques to ensure that work is executed within specific methods, project quality plan guidelines and procedures that can assure high quality of services and products, customer satisfaction, continuous improvement of processes and services.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Prepare and maintain project QA/QC plan to meet the project quality requirements.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives; monitors submittal status of QA/QC reports and reviews all technical submittals.</p><br> <p>Build and implement a control system for suppliers and subcontractors and conducts site audits.</p><br> <p>Attend all required/related meetings and arranges all project Quality requirements with the project owner, consultant, and project management team.</p><br> <p>Oversee the review material submittals and method statements submitted by the contractor to ensure the quality requirements set on the project is met.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Ensure that review is undertaken on a quarterly or on a need basis.</p><br> <p>Ensure to supervise all amendments and track and record revisions to the QA/ QC plan after any amendment and issue to all concerned parties.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives and ensure to monitor submittals of QA/QC reports.</p><br> <p>Ensure to prepare, review and amend quality objectives as per client requirements within 30 days of the start of the project and ensures its alignment with corporate QMS objectives.</p><br> <p>Build and implement a control system for suppliers and subcontractors</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Identifies staff development and training needs and ensures that trainings are obtained.</p><br> <p>Ensures to prepare during the beginning of the project the project training matrix and ensure that all trainings are carried out as planned.</p><br> <p>Ensures to monitor the effectiveness of the trainings on a need basis or minimum bi- annual basis.</p><br> <p>Manages to attend all required/related meetings and arrange all project Quality requirements with the project owner, consultant, project management.</p><br> <p>Ensures 100% coordination with project owner/ consultant/project management at all times and ensure that weekly scheduled meetings are carried out, and all records are documented; attendance sheets, minutes …etc.</p><br> <p>Ensures that all actions recorded in the minutes of meetings are followed up.</p><br> <p>Implements IMS procedures at project sites.</p><br> <p>Ensures that all QMS processes are followed, all approved forms are filled and all documents are generated as per the company procedures.</p><br> <p>Ensures that QMS trainings are carried out for all concerned staff of the project and all site staff and new joiners are complying 100% with the QMS requirements.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Comprehensive understanding of quality assurance and quality control principles, methodologies, and regulatory requirements.</p><br> <p>Strong leadership and managerial skills to oversee QA/QC teams, develop processes, and ensure compliance with standards.</p><br> <p>Excellent analytical abilities to identify quality issues, analyze root causes, and implement corrective actions.</p><br> <p>Proficiency in quality management systems and tools to monitor and improve product quality and processes.</p><br> <p>Effective communication and collaboration skills to liaise with internal teams, suppliers, and regulatory agencies to maintain quality standards.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Quality Assurance L4<br>Statistical Quality Control L4<br>Sub-contractor Quality Management L4<br>Total Quality Management L4<br>QA Audits L4<br>Build High-Performing Teams<br>Provide Direction<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or in any Engineering related discipline (e.g. Mechanical, Electrical)<br>Professional Qualification in Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Coating Quality Controller in Qatar</b>. Our client is seeking skilled, motivated professionals with hands-on experience in coating inspection, production supervision, and related coating activities. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Conduct coating inspections at various stages to verify compliance with applicable specifications and quality requirements.<br></li><li>Inspect surface preparation activities before coating application.<br></li><li>Monitor coating application processes and identify quality deviations.<br></li><li>Supervise coating-related production activities to maintain required quality standards.<br></li><li>Verify coating conditions, application procedures, and inspection results.<br></li><li>Maintain inspection records, quality reports, and coating documentation.<br></li><li>Coordinate with production and quality teams to resolve coating-related non-conformities.<br></li><li>Ensure coating activities comply with applicable inspection procedures, specifications, and safety requirements.<br></li></ul>Required Skills<br><ol><li><b>Coating Inspection:</b> Practical knowledge of inspecting surface preparation and coating application activities.<br></li><li><b>Quality Control:</b> Ability to identify coating defects and verify work against specifications.<br></li><li><b>Production Supervision:</b> Experience monitoring and supervising coating-related production activities.<br></li><li><b>NACE/FROSIO Knowledge:</b> Understanding of coating inspection practices supported by NACE Level 1 or FROSIO certification.<br></li><li><b>Inspection Documentation:</b> Ability to maintain inspection reports and coating quality records.<br></li></ol>Preferred Skills<br><ul><li>Shipyard or marine coating exposure.<br></li><li>Familiarity with coating inspection instruments and testing methods.<br></li><li>Knowledge of surface preparation and protective coating standards.<br></li></ul>Work Experience Requirements<br><p>Minimum <b>3 years of experience</b> in coating inspection, production supervision, and related coating activities is required. Candidates should have practical exposure to coating quality-control activities and inspection processes.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Mechanical Engineering or equivalent<br></li><li><b>Preferred:</b><br></li><li><b>Additional:</b> NACE Level 1 / FROSIO certification<br>Contact No-9786888866<br></li></ul><br> </div>

<p>Strong technical background in welding, painting/coating, static & rotating equipment and mechanical systems.</p><p>Excellent communication, reporting, and leadership skills.</p><p> Proven leadership in developing, implementing, and managing project-specific QA/QC plans and systems.</p><p><strong>Desired Candidate Profile</strong></p><p>Must hold CSWIP 3.1 / 3.2.2 and BGAS certifications (Expired Certificate is acceptable) along with lead audit certification.</p><p> QA/QC experience in the Oil & Gas EPC industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li> Conduct quality testing and assurance for all repairs to ensure work is completed in line with job orders.</li><li> Monitor and ensure that quality standards are implemented in all areas of activity and report any deviation upon occurrence.</li><li> Conduct detailed final overall inspection for all vehicles prior to delivery.</li><li> Whilst testing and inspecting vehicles note any additional work required and report to Service Reception accordingly</li><li> Maintain records of quality inspections and tabulate workshop quality levels monthly making recommendations for actions required to improve quality levels</li><li> Ensure Health, Safety and Environmental standards are maintained throughout the site within legal requirements and in line with Company policy. Report any out-of-line conditions to the Branch Service Manager. This also applies to personnel performing company business off site. Maintain records of any out of line conditions showing corrective action taken, with dates.</li><li> Perform other duties as assigned by immediate Manager.</li></ul><p> </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Dealership Experience </p><p>Must have Qatar Driving License</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>QC Coordinator</strong><br><strong>Location:</strong>&nbsp;Mesaieed, Qatar<br><strong>Start Date:</strong>&nbsp;First Half of September 2026<br><strong>Contract Duration</strong>: 6 months only<br> <strong>Position Summary</strong><br> We are seeking an experienced <strong>Quality Control (QC) Coordinator</strong> to oversee and coordinate quality control activities for industrial construction, installation, and commissioning works. The successful candidate will be responsible for ensuring that all subcontracted works are performed in accordance with approved quality standards, project specifications, inspection requirements, and applicable codes.<br> The role requires close coordination with site teams, subcontractors, inspectors, and stakeholders to ensure that quality objectives are achieved throughout the project lifecycle. <strong>Key Responsibilities</strong><br> <strong>Quality Management &amp; Coordination</strong><ul><li>Assist subcontractors in establishing and maintaining an effective quality management system on site.</li><li>Promote quality awareness and compliance across all project disciplines.</li><li>Ensure that all quality requirements, specifications, procedures, and standards are understood and implemented.</li><li>Coordinate quality-related activities between site teams and subcontractors.</li></ul><strong>Inspection &amp; Test Plan (ITP) Management</strong><ul><li>Review, comment on, and validate Quality Control Plans (QCP) and Inspection and Test Plans (ITP) submitted by subcontractors.</li><li>Ensure all required inspection and test activities are clearly defined and adequately documented.</li><li>Verify that approved ITPs and QCPs are implemented and followed throughout project execution.</li><li>Monitor inspection hold points, witness points, and verification activities.</li></ul><strong>Quality Assurance &amp; Compliance</strong><ul><li>Conduct regular site inspections and quality audits to verify compliance with project requirements.</li><li>Monitor workmanship standards and ensure installations conform to approved drawings, procedures, and specifications.</li><li>Ensure that inspection records and quality documentation are properly maintained.</li><li>Identify quality risks and recommend corrective actions.</li></ul><strong>Non-Conformance Management</strong><ul><li>Identify, document, and track Non-Conformance Reports (NCRs) and deficiencies.</li><li>Coordinate with subcontractors and site management to investigate quality issues.</li><li>Assist subcontractors in developing corrective and preventive actions.</li><li>Monitor closure of NCRs and verify effectiveness of corrective measures.</li><li>Escalate significant quality concerns to project management when required.</li></ul><strong>Documentation &amp; Quality Records</strong><ul><li>Compile and maintain project quality records and documentation.</li><li>Expedite the collection of required quality documents from subcontractors.</li><li>Prepare and compile Quality Data Books and turnover dossiers.</li><li>Ensure all inspection reports, certificates, test results, and quality records are complete, accurate, and properly filed.</li><li>Support project handover activities through effective documentation management.</li></ul><strong>Audits &amp; Continuous Improvement</strong><ul><li>Perform internal quality audits and participate in external audits when required.</li><li>Monitor quality performance indicators and identify opportunities for improvement.</li><li>Support implementation of lessons learned and best practices.</li><li>Promote continuous improvement initiatives throughout the project.</li></ul><strong>Scope of Work</strong><br> The QC Coordinator will support quality control activities related to:<ul><li>Structural Steel Fabrication, Modification, and Erection</li><li>Utility Piping Systems (Compressed Air)</li><li>Hydraulic Piping Installation</li><li>Mechanical Equipment Installation<ul><li>Fans</li><li>Filtration Systems</li><li>Rotating and Moving Equipment</li></ul></li><li>Platework and Ducting Installation</li><li>Electrical Installation Works</li></ul><strong>Qualifications &amp; Experience</strong><ul><li>Degree or Diploma in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related technical discipline.</li><li>Minimum 5 years of experience in Quality Control or Quality Assurance within industrial construction, manufacturing, maintenance, or heavy engineering projects.</li><li>Experience managing multi-discipline quality activities is preferred.</li><li>Familiarity with international quality standards, inspection procedures, and documentation requirements.</li><li>Experience with inspection and testing of mechanical, piping, structural steel, platework, and electrical installations.</li><li>Knowledge of quality management systems and audit processes.</li><li>Ability to interpret engineering drawings, specifications, and technical documentation.</li></ul><strong>Key Competencies</strong><ul><li>Strong attention to detail and commitment to quality</li><li>Excellent inspection and auditing skills</li><li>Strong analytical and problem-solving abilities</li><li>Effective communication and coordination skills</li><li>Ability to manage multiple quality activities simultaneously</li><li>Proficiency in quality documentation and reporting</li><li>Strong organizational and follow-up capabilities</li><li>Ability to work effectively in a multicultural project environment</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li>Inspect mechanical and piping works including fabrication, installation, and welding activities to ensure compliance with project specifications and quality standards<br></li><li>Review and witness ITPs, conduct visual and dimensional inspections, and raise NCRs for non-conforming works<br></li><li>Maintain QC documentation, inspection records, and reports throughout the project<br></li></ul><br><span>Requirements</span><ul><li>Minimum<b>5 years</b>experience as a QC Inspector in the<b>Oil &amp; Gas</b>industry<br></li><li>Hands-on experience in mechanical and piping inspection; relevant QC certifications are an advantage<br></li><li>Available to join<b>immediately</b>upon selection<br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary We are seeking an experienced Quality Assurance Engineer to ensure engineering projects are delivered in accordance with quality management systems, industry standards and regulatory requirements. This role plays a key part in maintaining project quality throughout all stages of delivery. Key Responsibilities Conduct quality inspections and technical audits. Review engineering procedures and identify opportunities for improvement. Monitor project quality throughout installation and commissioning. Prepare quality reports and non-conformance documentation. Support corrective and preventive action programmes. Promote continuous improvement across engineering processes. Ensure compliance with ISO standards and HSE requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Engineering, Quality Management or related discipline. ISO Lead Auditor or equivalent certification preferred. Extensive experience within engineering quality assurance. Excellent documentation, reporting and analytical skills</p><p></p></section>

<ul><li>Perform microbiological analysis of raw materials, in-process samples, and finished products to ensure they meet quality standards and safety regulations.</li><li>Conduct regular inspections and tests to ensure products are free from harmful microorganisms (e.g., bacteria, molds, yeasts, pathogens).</li><li>Perform sterility tests on production equipment, packaging materials, and the environment (including air, surfaces, and water) to prevent contamination.</li><li>Monitor and evaluate the effectiveness of current quality control processes, making recommendations for improvement where necessary.</li><li>Ensure compliance with local and international food safety regulations (e.g., FDA, USDA, ISO, HACCP, AOAC, CCFRA, BAM) and implement proper corrective actions when deviations occur.</li><li>Maintain accurate records of test results, findings, and actions taken.</li><li>Prepare reports on microbiological findings for management and regulatory bodies.</li><li>Investigate the root causes of microbiological contamination issues and assist in developing corrective actions to mitigate recurrence.</li><li>Work closely with production, R&D, and other departments to maintain food safety standards and improve production processes.</li><li>Provide guidance and training to production staff and new team members on microbiological testing procedures, sanitation practices, and food safety protocols.</li><li>Ensure team adherence to food safety and quality standards.</li><li>Conduct regular food safety briefings and reinforce a strong food safety culture.</li><li>Monitor compliance with hygiene and operational procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Advanced degrees or certifications (e.g., HACCP, ISO 22000) are a plus.</li><li>Proficiency in laboratory techniques, microbiological analysis, and familiarity with laboratory equipment.</li><li>Knowledge of food safety regulations, including HACCP, GMP, and FDA/USDA guidelines.</li><li>Strong attention to detail with the ability to maintain accuracy in testing and data recording.</li><li>Excellent analytical and problem-solving skills, with the ability to troubleshoot microbiological issues effectively.</li><li>Strong written and verbal communication skills, with the ability to present findings clearly to both technical and non-technical stakeholders.</li><li>Ability to work collaboratively within a multidisciplinary team, contributing to the achievement of company goals.</li><li>Ability to work in a laboratory and manufacturing environment, which may involve standing, walking, and the use of protective equipment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>JOB PURPOSE: Perform / Assist inspections and testing of raw materials, in-process production, and finished goods to ensure compliance with FPIG’s standards and specifications. Works under the close supervision of senior QC inspectors &amp; QC Supervisors, with limited authority.</p> <p>KEY ACCOUNTABILITIES</p> <p>• Policies and Procedures: Follow all operational procedures and QC work instructions.<br>• Ensure compliance with safety and quality requirements.<br>• In-Process Inspection and Product Inspection: Conduct basic in-process checks on raw materials, resin mix ratios, and production parameters.<br>• Perform online/offline inspections of products as per ITP/project requirements.<br>• Perform non-destructive and destructive testing under guidance.<br>• Reporting &amp; Documentation: Prepare daily QC reports and maintain inspection records.<br>•&nbsp; Assist in preparing documentation for TPI/client inspections.<br>• Stock Checks: Participate in periodic stock counts.<br>• Assist with calibration of tools and measuring equipment.<br>• Preparation of reports, TPI inspection and release &nbsp; &nbsp;<br>• Prepare the daily QC internal reports.<br>• Carry out the final inspection.<br>• Perform additional tests as per the ITP for the witness point of Customer/Client.<br>• Mold &amp; Socket Sleeve inspection: Carry out steel mold and socket sleeve inspection either at the factory or at the supplier’s premises as per the relevant engineering drawings to ensure that those molds are manufactured as per the given approved drawings with assistance from senior inspectors.</p> <p>HSE Compliance &nbsp; &nbsp;<br>• Use PPE and maintain work areas clean and safe.<br>• Report unsafe acts, incidents, and near-misses.</p> <p>SPAN OF COMMUNICATION<br>Internal: Quality Engineer, Production, Projects and Delivery Departments.</p> <p>External: Third Party Inspectors.</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div>