Engineering Jobs in Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Advise and provide Electrical Engineering technical expertise and support consistent with Senior Engineer level competency during and Startup phase until handover to permanent Asset to ensure project deliverables meet Operations expectations in terms of Safety, Operability, Reliability and Maintainability over the facility design life cycle and are in accordance with established policies and procedures.</li> </ul><br><ul> <li>Prepare, coordinate and provide a variety of electrical engineering technical expertise and support to contribute to the division strategy and goals which includes design reviews, technical evaluations, commissioning, start-up, failure analysis and advanced troubleshooting as part of punch list and warranty claim resolutions, and Management of Change, with the aim to deliver innovative, efficient and reliable electrical systems.</li> <li>Support or lead the definition and implementation of integrity program for electrical equipment to achieve high standards of safety, reliability and availability.</li> <li>Support development and implementation of surveillance and administration programs for critical Electrical systems of new projects to achieve high standards of Reliability, Availability and Cyber Security.</li> <li>Guide less experienced engineers in implementing the company integrity and reliability systems.</li> <li>Prepare, coordinate and provide electrical engineering technical expertise and support during Commissioning and Startup, ensuring seamless integration of electrical systems and compliance.</li> <li>Provide technical expertise in troubleshooting and resolving electrical issues during the operational phase.</li> <li>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</li> <li>Supervise and ensure effective completion of activities undertaken by contractors, consultants and service providers.</li> <li>Coordinate and collaborate with vendors and contractors to source high-quality electrical equipment, where required, and ensure compliance with project specifications.</li> <li>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility, in line with electrical assurance strategies.</li> <li>Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability, Availability and Cyber Security.</li> <li>Produce and maintain detailed and comprehensive discipline handover packages for operating company following Startup for enhanced operational knowledge transfer and smooth transition to routine operations.</li> <li>Prepare and implement high risk commissioning activities for highly complex and large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance for sustained operational excellence.</li> </ul><br><ul> <li>Bachelor's degree in engineering or equivalent</li> <li>6 years' experience in an oil and gas environment</li> <li>Able to work and make decisions under highly stressing conditions.</li> <li>Fluent in written and spoken English.</li> <li>Strong leadership &amp; people skills.</li> <li>Computer literacy involves the regular use of professional office and technical applications.</li> <li>Senior Electrical Engineer-level of competence as per Electrical Engineering Technical Competencies.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide mechanical engineering technical support to ensure the safe operation and maintenance of mechanical equipment installed offshore in accordance with established policies and procedures, which contribute to the department objectives and are in alignment with the company strategy.</li> </ul><br><ul> <li>Provide mechanical engineering support to offshore operations and maintenance in day-to-day troubleshooting including Level-2 complexity Issues and PM/CM activities as per maintenance strategies.</li> <li>Initiate eMOC's which require studies, support engineering in feasibility study and Implementation of EMOC recommendations to the asset instrument team.</li> <li>Provide input to Reliability Centred Maintenance (RCM) team for improving system maintenance strategies, participate and contribute to Root Cause Failure Analysis (RCFA's), risk screening, Risk Based Work Selection (RBWS), Formal Risk Assessment (FRA), Bad Actor Analyse, Risk Assessment and Equipment Strategies Reviews/Optimization to ensure the compliance of technical requirement.</li> <li>Develop discipline specific budget and provide inputs to the department budget.</li> <li>Support close collaboration with Offshore Maintenance, Workshop, Engineering and Project Management dept. for the timely close out of outstanding maintenance activities and the process review and development of maintenance procedures.</li> <li>Support activities undertaken by contactors, consultants and service providers.</li> <li>Execute the maintenance quality verification program.</li> <li>Provide in house technical trainings to asset maintenance team as a part of technical competency program.</li> <li>Conduct technical evaluation of material initiated for procurement including routine, non-routine and shutdown activities to ensure availability of right quality and specification of the material. Collaborate closely with obsoletion management team for the effective and efficient resolution of the obsolete item for critical equipment.</li> <li>Participate in establishing a demand plan for the contracts activities and establish all the contracts for mechanical maintenance activities including post contract award process support.</li> </ul><br><ul> <li>Bachelor's degree in Mechanical Engineering or Science majoring in Mechanical Engineering</li> <li>6 years' experience in mechanical maintenance in oil and gas or petrochemical sector</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance </li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> <li><strong>Duration:</strong><ul> <li>15 months to 24 months, with possible extension</li> </ul></li> <li><strong>Location:</strong><ul> <li>Qatar Onshore</li> </ul></li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Organize and coordinate the development and implementation of metering engineering plans and activities, providing advice and technical expertise in metering equipment and instrumentation integrity, and collaborating with cross-functional teams to achieve project readiness, and safe and seamless start-up of projects.</li> </ul><br><ul> <li>Develop and implement comprehensive metering plans for projects, ensuring adherence to industry standards, regulations and project specifications. Develop and implement detailed engineering specifications and standards for metering equipment and instrumentation in line with operational needs.</li> <li>Collaborate with cross-functional teams across OES projects to integrate metering systems into facility designs meeting operational and contractual requirements.</li> <li>Coordinate the installation, calibration and testing of metering devices to ensure accuracy and reliability.</li> <li>Conduct audits and inspections of metering systems to identify opportunities for improvement and ensure operational, contractual and regulatory compliance.</li> <li>Provide technical expertise in assessing metering equipment integrity, ensuring alignment with project specifications, and maintaining adherence to stringent quality standards.</li> <li>Collaborate closely with vendors and suppliers to ensure the quality and reliability of metering equipment procured for projects.</li> <li>Prepare the technical specifications for metering contracts including scope of work and contribute to the evaluation of calls for tender for metering services, and annual budget preparation and audits as required by company relevant procedures.</li> <li>Interface with regulatory authorities and certification bodies to ensure compliance with industry codes, standards, and regulations. Coordinate with vendors and external agencies for specialized metering and innovative technologies.</li> <li>Collaborate with operations, engineering and project teams to conduct thorough risk assessments, emphasizing safety, reliability, and environmental considerations to achieve project readiness.</li> <li>Stay abreast of emerging technologies and industry's best practices, recommending and implementing innovative metering methodologies to enhance reliability and contribute to efficient project start-ups.</li> </ul><br><ul> <li>Bachelor's degree in instrumentation or electronics engineering.</li> <li>Six (6) years of experience in oil and gas, petrochemical, process plant or power plant with a minimum of four (4) years in the field of flow measurement and metering.</li> <li>Competent in various engineering software tools related to flow measurement and metering like Kelton flow calculation, S600 flow computer applications etc.</li> <li>Aware of ISO standards on flow measurement.</li> <li>Fluent in English language (demonstrated verbal and written skills).</li> <li>Computer literate in MS Word and Excel and knowledgeable in relevant software tools and specifications.</li> <li>Conversant with using Meridium or similar data management software.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><u><strong>Genetec</strong></u><strong>&nbsp;- Protect the everyday</strong></p><br><p>We are a global Canadian company with a broad solutions portfolio encompassing&nbsp;<strong>security</strong>, intelligence, and operations. We serve customers within various industries including transportation,&nbsp;<strong>education</strong>, and government. At Genetec we embrace open&nbsp;<strong>communication</strong>,&nbsp;<strong>creativity</strong>, and&nbsp;<strong>continuous learning</strong>&nbsp;to allow everyone to flourish in their own unique career paths.</p><br><p>Our network, of over&nbsp;<strong>2400</strong>&nbsp;people globally, is made up of&nbsp;<strong>diverse</strong>&nbsp;individuals who are&nbsp;<strong>passionate</strong>&nbsp;about their work and open to trying new ideas. We prioritize the&nbsp;<strong>success</strong>&nbsp;and&nbsp;<strong>well-being</strong>&nbsp;of our employees, proven by our 2022 Internal Engagement Survey results of&nbsp;<strong>4.4/5</strong>.</p><br><p><strong>Job description:</strong></p><br><p>The Sales Engineer Qatar collaborates closely with various teams, particularly the Sales team, Field Project Engineers, Pre-Sales Engineers, and Sales Networks, to position Genetec's solutions and products. They are the technical point of contact for customers and Sales teams.</p><br><p><strong>Roles and responsibilities:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Develop and maintain an in-depth knowledge of Genetec's software and hardware products.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Define the solutions best suited to the requirements of our customers and partners</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Develop and maintain excellent relationships with all stakeholders, customers and partners</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Present high-level demonstrations of our entire product range</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Provide technical support to sales teams in response to customer specifications</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work closely with the technical support team to ensure a seamless transition between the pre-sales and post-sales teams, and the successful implementation of our solutions.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in specialized security trade shows, exhibitions and seminars.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Write white papers and become a true expert on Genetec solutions</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Provide technical feedback from the field to upstream Product Management teams.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Implement complex software solutions</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Travel 30-40% of the time</p><br>Requirements<p><u><strong>About you</strong></u></p><br><p><em>We welcome all qualified candidates, including those who may not meet every listed requirement. If you're excited about this role and believe you can make an impact, we’d love to hear from you.</em></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Engineering degree in electronics, computer science, electrical engineering or equivalent</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; At least 5 years' professional experience in roles requiring regular exchanges with customers or partners, if possible in a technological environment with links to the security field in Qatar. </p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Initial experience in a pre-sales role in an innovative IT or security company</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Excellent oral presentation skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Excellent analytical and incident resolution skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of the security market</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Comfortable working in a multicultural and international environment</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience in the security field in the local region</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience as a security system installer or commissioner and as a system integrator.</p><br><p><strong>Key skills:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Customer orientation, commercial and interpersonal skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Analytical and complex problem-solving skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work organization within project deadlines</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Positive attitude</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Sense of innovation</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Follow-through on objectives</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Oral and writing skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conviction and Influence</p><br><p><strong>Knowledge:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Genetec product range</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Video and access control systems</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IP network systems and protocols</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Windows Operating Systems</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PC configuration</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MCSE and/or CCNA certification</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Oral presentation techniques</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Problem analysis and incident resolution</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Security market</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Professional level of Arabic and English. An additional language is an asset.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span><span><span><span>Responsible for planning and directing all Engineering, Technical Support, Testing &amp; Commissioning, Inspection, and Handing over in coordination with the Commissioning Manager and as per company Quality and Customer Care standards of fire and life safety systems.</span></span></span></span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p><span><span><span>Responsible for planning and controlling testing and commissioning work of assigned projects and jobs in process as per the terms of agreement and contract.</span></span></span></p><br> <p><span><span><span>Ensure that all the requirements concerning testing and commissioning aspects of fire and life safety systems of the projects are fully covered and implemented as per the project requirements.</span></span></span></p><br> <p><span><span><span>Work closely with the FA management team to set and/or implement policies, procedures, and systems and to follow through with implementation.</span></span></span></p><br> <p><span><span><span>Developing and implementing comprehensive work plans and procedures.</span></span></span></p><br> <p><span><span><span>Ensure strict compliance with quality, health and safety, and environmental management systems.</span></span></span></p><br> <p><span><span><span>Keep logs and report on daily activities to comply with local authorities. </span></span></span></p><br> <p><span><span><span>Develop and follow testing and commissioning procedures and ensure implementation of those procedures through the Commissioning team to comply with local QCDD regulations and international codes and standards.</span></span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p><span><span><span>Ensure work complies with codes, NFPA standards, Regulations &amp; permits.</span></span></span></p><br> <p><span><span><span>Ensure strict compliance with quality, health and safety and environmental management system</span></span></span></p><br> <p><span><span><span>Review the shop drawings and confirm that nothing is missing as per specifications mentioned in the agreement/contracts and other project documents.</span></span></span></p><br> <p><span><span><span><span><span>Engineering at the main office and co-ordinate with technical/engineering team at the main office.</span></span></span></span></span></p><br> <p><span><span><span>Maintain local authority specifications/standards and requirements.</span></span></span></p><br> <p><span><span><span><span><span>Project coordination as necessary, especially the mimic panels, smoke panels, any kind of calculations, schematic diagram, shop drawing, C &amp;E Matrix etc.</span></span></span></span></span></p><br> <p><span><span><span><span><span>Provide complete solution, System Design, and Configuration to the Customer/ Client</span></span></span></span></span></p><br> <p><span><span><span>Coordinate continuously with the commissioning manager and wherever necessary take required measures to complete maintenance and other required services.</span></span></span></p><br> <p><span><span><span>Active involvement in data gathering for engineering/automation reports and root cause analysis</span></span></span></p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p><span><span><span>UPDA (engineering registration certificate).</span></span></span></p><br> <p><span><span><span>QCDD (certified fire engineer).</span></span></span></p><br> <p><span><span><span>NFPA 72 , NFPA 101 .</span></span></span></p><br> <p><span><span><span>Fire systems manufacture certification (Carrier Fire System, EST3, EST4, Xtralis, AP sensing).</span></span></span></p><br> <p><span><span><span>Project software like Auto-cad, and Primavera and advanced level of computer office skills.</span></span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><p><span><span><span>7+ years’ experience in fire and life safety systems in a commissioning environment.</span></span></span></p><br> <p><span><span><span>5+ years’ GCC experience (preferred)</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Electrical ELV design L3<br>Electrical lighting design L3<br>Electrical load diagrams / schedules and calculation L3<br>Electrical power design L3<br>Leadership<br>Quality<br>Resilience<br>Voltage drop calculation L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Electrical Engineering or Mechanical Engineering<br><br><br><br> </div>

<p>Technical Knowledge :</p><p>-Electrical LV systems: MDB, SMDB, DB, cabling, containment, earthing, lighting and power..</p><p>-ELV systems: Fire Alarm, CCTV, Access Control, Data/Telephone, BMS etc.</p><p>-Plumbing: Water supply, drainage, sewage and stormwater.</p><p>-HVAC systems: DX, VRF/VRV, chilled water, AHUs, FCUs, ventilation and exhaust.</p><p>-Fire Fighting: Sprinkler, hose reel, fire pump and associated systems.</p><p>-Testing & Commissioning.</p><p>-MEP coordination with architectural, structural and civil works.</p><p>-Builders' works associated with MEP.</p><p>-Reading IFC drawings, specifications and BOQ.</p><p>-Shop drawings and coordinated MEP drawings.</p><p>-Material submittals and technical datasheets.</p><p>-Method Statements and ITPs.</p><p>-RFIs and technical queries.</p><p>-As-built drawings and O&M manuals.</p><br><p>Software :</p><p>-AutoCAD – essential</p><p>-MS Office – essential</p><p>-Revit MEP – preferred</p><br><p>Qatar Authority Coordination :</p><p>Should understand and coordinate requirements involving, as applicable:</p><p>-KAHRAMAA — electricity and water</p><p>-Qatar Civil Defence / MOI — Fire & Life Safety</p><p>-Ashghal — where infrastructure/public works interfaces are involved</p><p>-Municipality/building permit requirements</p><p>-Telecom/service providers where applicable</p><p><strong>Desired Candidate Profile</strong></p><p>Education :</p><p>-Bachelor’s Degree in Mechanical Engineering or Electrical Engineering from a recognized university.</p><p>-Engineering degree/certificates should be attested where required in Qatar.</p><p>-Registration with the relevant Qatar engineering/professional registration authority may be required depending on the project, consultant, position and contractual requirements. Ashghal project documentation, for example, has required project engineers to be professionally registered in Qatar.</p><br><p>Experience :</p><p>-Minimum 5–8 years total experience in building/construction MEP works.</p><p>Previous experience in villas, residential/commercial buildings, hotels or similar projects depending on your company scope.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Planning Engineer is responsible to oversee and manage the planning and scheduling activities for engineering projects within an organization. This role involves developing detailed project schedules, coordinating with various departments, and monitoring progress to ensure projects are completed on time and within budget. Additionally, Senior Planning Engineers analyze project requirements, allocate resources, and identify potential risks to mitigate delays and optimize project outcomes. They play a critical role in facilitating communication among project stakeholders, providing regular updates on project status, and implementing adjustments to schedules as needed to meet project objectives. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Develop and maintain comprehensive project schedules, incorporating all tasks, milestones, and deliverables to ensure project timelines are accurately represented.</p><br> <p>Coordinate with project managers, engineers, and other stakeholders to gather project requirements, establish priorities, and define project scope.</p><br> <p>Monitor project progress against established schedules, identifying deviations, delays, and potential risks, and implementing corrective actions as necessary.</p><br> <p>Conduct regular project status meetings, providing updates on schedule performance, resource utilization, and potential impacts on project outcomes.</p><br> <p>Analyze project data and performance metrics to identify trends, opportunities for improvement, and areas of concern, and recommend appropriate adjustments to schedules and resource allocation.</p><br> <p>Collaborate with procurement, logistics, and supply chain teams to ensure timely delivery of materials and resources needed for project execution.</p><br> <p>Prepare and distribute reports, dashboards, and presentations summarizing project schedules, progress, and performance indicators for internal and external stakeholders.</p><br> <p>Provide guidance, support, and mentorship to junior planning engineers and project teams, fostering a culture of accountability and excellence in project scheduling and management.</p><br> <p>Stay updated on industry trends, best practices, and emerging technologies in project management and scheduling to inform continuous improvement initiatives.</p><br> <p>Ensure compliance with organizational policies, procedures, and quality standards in all aspects of project scheduling and management.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge in Engineering fundamentals</p><br> <p>Knowledge in Principles of planning and knowledge in Principles and practices of research and date collection.</p><br> <p>Familiarity with planning practices and the associated software such as Advance Primavera 6</p><br> <p>Knowledge in Principles and practices of research and data collection</p><br> <p>Familiar with local and international standards in construction</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Cash Flow Analysis L3<br>Project Resource Management L3<br>Project Tracking and Reporting L3<br>Revenue Forecasting L3<br>Agility<br>Primavera Project Planner L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or Engineering<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Project Engineer – Civil</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Project Engineer – Civil</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>·</span></span>Provide advanced diagnostics at system, application and infrastructure level for the system.<br></p><br><p><span><span>·</span></span>Carry out root-cause analysis for major and recurring incidents and own the permanent fix.<br></p><br><p><span><span>·</span></span>Open and manage OEM back-to-back support cases under the same ticket and SLA clock.<br></p><br><p><span><span>·</span></span>Own configuration, firmware and software maintenance and coordinate manufacturer releases and upgrades.<br></p><br><p><span><span>·</span></span>Own the preventive-maintenance procedures and predictive monitoring for the system.<br></p><br><p><span><span>·</span></span>Maintain the design documents, SOPs and knowledge base; mentor and sign off Level-2 competence.<br></p><br><p><span><span>·</span></span>Provide technical assessment to the Change Advisory Board for changes to the system.<br></p><br><p><span><span>·</span></span>Maintain readers, antennas and controllers; verify read rates and connectivity; tune performance with the OEM.<br></p><br><br><span>Requirements</span><p><span><span>·</span></span>FEIG / Oculus RFID product training; RFID/RF experience.<br></p><br><p><span><span>·</span></span>ITIL Foundation.<br></p><br><p><b><span>Experience.</span></b>3 or more years hands-on with the specific system in a comparable environment.<br></p><br><p><b>Competencies</b><br></p><br><p><span><span>·</span></span>Deep product knowledge.<br></p><br><p><span><span>·</span></span>Diagnostic and root-cause skill.<br></p><br><p><span><span>·</span></span>OEM liaison.<br></p><br><p><span><span>·</span></span>Documentation and mentoring.<br></p><br><p><b>Key performance indicators</b><br></p><br><p><span><span>·</span></span>Advanced-incident resolution within SLA.<br></p><br><p><span><span>·</span></span>RCA delivered within timeline.<br></p><br><p><span><span>·</span></span>Repeat-incident reduction.<br></p><br><p><span><span>·</span></span>Certification currency.<br></p><br><br> </div>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations. Process Control and Instrumentation skills Troubleshooting abilities Calibration expertise Experience in the manufacturing industry</p><p><strong>Desired Candidate Profile</strong></p><p>Education : BE Instrument</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Planning Engineer -Mechanical PLANNING ENGINEER – MECHANICAL&nbsp; JOB PURPOSE <p>Supervise and lead the planning, scheduling, resource management, <strong>mechanical maintenance contract management, contractor supervision, and site execution</strong> of routine, preventive, corrective, turnaround, and major mechanical maintenance activities.</p><br> <p>The position shall provide strong coordination between Maintenance, Operations, Reliability, Engineering, Inspection, Procurement, Contracts, HSE, and mechanical maintenance contractors to ensure work is completed safely, efficiently, within approved <strong>schedule, budget, quality, and contractual requirements</strong>.</p><br> KEY TASKS AND RESPONSIBILITIES 1. Mechanical Maintenance Planning &amp; Scheduling <ul><li>Supervise the activities assigned to Senior Planners and cross-functional maintenance planning teams.</li><li>Lead preparation and planning of <strong>mechanical maintenance activities</strong> for rotating equipment, static equipment, piping, valves, pumps, compressors, turbines, heat exchangers, pressure vessels, tanks, mechanical packages, and associated plant equipment.</li><li>Develop detailed maintenance plans, job plans, work packs, schedules, manpower requirements, material requirements, tools, equipment, and contractor resource requirements.</li><li>Participate in planning and coordination of preventive, predictive, corrective, breakdown, routine, and major mechanical maintenance programs.</li><li>Ensure all required manpower, mechanical spare parts, materials, tools, equipment, lifting facilities, scaffolding, specialist services, and contractors are available before work execution.</li><li>Review maintenance backlog and prioritize mechanical maintenance activities based on equipment criticality, production requirements, safety, reliability, and plant operating conditions.</li><li>Coordinate with Operations, Mechanical Maintenance, Reliability, Inspection, Engineering, Procurement, Contracts, HSE, and other disciplines to ensure timely execution.</li><li>Ensure proper budget allocation and resource planning for critical mechanical equipment to support reliable and trouble-free plant operation.</li><li>Prepare technical documentation in accordance with applicable standards, codes, specifications, and CLIENT requirements.</li></ul> 2. Mechanical Maintenance Contracts &amp; Contractor Management <ul><li>Lead the planning and coordination of <strong>mechanical maintenance contracts</strong>, including long-term mechanical maintenance service contracts, manpower contracts, specialist mechanical services, equipment hire, and shutdown/turnaround maintenance contracts.</li><li>Prepare detailed <strong>Scope of Work (SOW), technical specifications, BOQ/MTO, manpower requirements, equipment requirements, work schedules, cost estimates, execution methodologies, and contractor deliverables</strong> for mechanical maintenance contracts.</li><li>Develop mechanical maintenance contracting strategies based on workload, equipment criticality, manpower requirements, maintenance history, and in-house versus outsourced execution.</li><li>Review annual requirements for mechanical manpower, specialist services, lifting equipment, machining services, scaffolding, inspection support, and other special equipment/services.</li><li>Prepare detailed tender documents and technical specifications for major and long-term mechanical maintenance contracts.</li><li>Participate in contractor prequalification, technical clarification meetings, site visits, tender meetings, and contractor selection processes.</li><li>Perform technical evaluation of contractor bids, including:<ul><li>Contractor experience in mechanical maintenance.</li><li>Manpower and supervision structure.</li><li>Mechanical maintenance methodology.</li><li>Equipment, tools, lifting facilities, and workshop capabilities.</li><li>Proposed execution schedule and resource loading.</li><li>HSE and quality arrangements.</li><li>Technical compliance with CLIENT requirements.</li><li>Productivity and performance commitments.</li></ul></li><li>Support Contracts and Procurement departments during tendering, clarification, negotiation, award, renewal, and closeout of mechanical maintenance contracts.</li><li>Review contractor mobilization plans and verify availability of manpower, supervisors, tools, equipment, materials, lifting resources, permits, documentation, and site facilities.</li><li>Coordinate daily and weekly mechanical maintenance activities with contractors and ensure alignment with approved maintenance priorities.</li><li>Monitor contractor performance against <strong>scope, schedule, manpower, productivity, quality, HSE, KPIs, SLAs, and contractual deliverables</strong>.</li><li>Monitor contractor manpower utilization, productivity, equipment utilization, work-front availability, and progress at site.</li><li>Conduct regular contractor progress and performance meetings and ensure corrective actions are implemented.</li><li>Review contractor work orders, timesheets, progress reports, completed quantities, manpower records, and supporting documents.</li><li>Provide technical and planning input for contractor progress measurement and payment certification.</li><li>Identify contractor delays, manpower shortages, productivity issues, material constraints, equipment shortages, and schedule risks.</li><li>Develop and monitor contractor recovery plans for delayed or critical mechanical maintenance activities.</li><li>Participate in technical assessment of contractor <strong>variations, additional works, claims, and extension-of-time requests</strong>, including cost and schedule impact.</li><li>Maintain contractor performance records, productivity data, lessons learned, and historical information for future mechanical maintenance contract tendering.</li><li>Participate in contractor performance evaluations and recommend corrective or improvement actions.</li><li>Support contract closeout, including outstanding works, punch-list clearance, final quantities, documentation, lessons learned, and demobilization.</li></ul> 3. Site-Based Mechanical Maintenance Experience <ul><li>Maintain regular and frequent <strong>site presence</strong> to monitor mechanical maintenance execution, contractor performance, manpower deployment, work progress, and resource availability.</li><li>Provide direct site coordination and supervision of mechanical contractors, subcontractors, technicians, and maintenance personnel.</li><li>Conduct site walkdowns before commencement of mechanical maintenance activities to verify actual site conditions and work requirements.</li><li>Verify work scopes against equipment condition, drawings, specifications, job plans, inspection findings, and site requirements.</li><li>Ensure work-front readiness, including availability of materials, mechanical spares, tools, lifting equipment, scaffolding, access, isolation, permits, manpower, and specialist services.</li><li>Monitor field execution against approved mechanical maintenance schedules and identify constraints affecting completion.</li><li>Coordinate with mechanical supervisors and contractors to resolve daily site execution issues.</li><li>Monitor contractor compliance with approved Method Statements, JSA, Risk Assessments, Permit-to-Work requirements, quality procedures, and HSE requirements.</li><li>Verify actual site progress against contractor-reported progress and ensure accurate progress measurement.</li><li>Participate in inspections and verification of mechanical maintenance activities such as:<ul><li>Pumps and compressors maintenance.</li><li>Valve overhaul and replacement.</li><li>Heat exchanger maintenance.</li><li>Static equipment maintenance.</li><li>Piping repairs and modifications.</li><li>Rotating equipment alignment.</li><li>Mechanical seal replacement.</li><li>Bearing replacement.</li><li>Coupling and shaft-related maintenance.</li><li>Equipment installation and removal.</li><li>Pressure testing and reinstatement.</li><li>Mechanical completion and punch-list activities.</li></ul></li><li>Coordinate lifting, rigging, scaffolding, equipment access, and other mechanical work-front requirements with relevant site teams.</li><li>Verify completed work and ensure maintenance activities meet technical, quality, safety, and CLIENT requirements.</li><li>Participate in mechanical equipment testing, commissioning support, reinstatement, and handover activities where applicable.</li><li>Provide site feedback to update maintenance plans, schedules, manpower requirements, and recovery plans.</li><li>Coordinate multiple mechanical contractors and subcontractors working simultaneously within the plant.</li><li>Support troubleshooting of mechanical equipment problems with Maintenance, Reliability, Engineering, OEMs, and contractors.</li></ul> 4. Shutdown &amp; Turnaround Mechanical Planning <ul><li>Lead and oversee planning of <strong>mechanical shutdown and turnaround activities</strong>.</li><li>Develop detailed mechanical shutdown work lists, job packages, resource-loaded schedules, and critical paths.</li><li>Review estimates for mechanical labour, materials, spare parts, tools, lifting equipment, scaffolding, specialist services, and contractors.</li><li>Coordinate shutdown preparations with Supply Chain, Contracts, Procurement, Inspection, HSE, Operations, Production, Reliability, and Mechanical Maintenance.</li><li>Develop contractor manpower and equipment mobilization plans for shutdown and turnaround activities.</li><li>Lead activities during turnarounds, including <strong>site supervision, contractor coordination, manpower follow-up, work-front management, progress monitoring, and schedule control</strong>.</li><li>Monitor mechanical contractor progress against the approved shutdown critical path.</li><li>Identify delays and constraints and coordinate recovery actions.</li><li>Participate in daily shutdown meetings and provide accurate progress, manpower, productivity, and schedule information.</li><li>Support shutdown closeout, punch-list clearance, mechanical completion, documentation, lessons learned, and contractor demobilization.</li></ul> 5. Mechanical Maintenance Budget &amp; Cost Control <ul><li>Review annual manpower and special equipment requirements for mechanical maintenance.</li><li>Analyze manpower utilization, contractor productivity, material consumption, equipment utilization, and maintenance cost data.</li><li>Prepare cost estimates for mechanical maintenance activities, shutdowns, turnarounds, manpower contracts, equipment hire, and specialist services.</li><li>Support preparation and monitoring of the annual mechanical maintenance budget.</li><li>Monitor planned versus actual maintenance expenditure and contractor costs.</li><li>Identify cost-saving opportunities while maintaining equipment reliability, safety, quality, and integrity.</li><li>Raise necessary documentation to initiate contract negotiations for ongoing mechanical manpower, equipment hire, and specialist maintenance services.</li></ul> 6. Mechanical Equipment &amp; Spare Parts Planning <ul><li>Prepare proper plans for critical mechanical spare parts to ensure availability when required.</li><li>Review equipment criticality and maintenance history to identify critical mechanical spares.</li><li>Coordinate with Supply Chain and Procurement for timely procurement of mechanical spare parts.</li><li>Perform technical evaluations of material and spare-parts quotations for stock and special items.</li><li>Coordinate with OEMs and vendors regarding technical specifications, spare parts, equipment problems, and maintenance requirements.</li></ul> 7. Reliability &amp; Mechanical Maintenance Improvement <ul><li>Participate in the development and improvement of preventive and predictive mechanical maintenance programs.</li><li>Ensure implementation of Inspection and Reliability recommendations to improve mechanical equipment integrity and reliability.</li><li>Participate in Root Cause Analysis as a member of the Reliability/RCA team.</li><li>Participate in failure analysis reviews and maintenance strategy development for bad-actor mechanical assets.</li><li>Participate in troubleshooting with Mechanical Maintenance and Reliability teams to resolve recurring equipment reliability problems.</li><li>Analyze mechanical equipment failure history and recommend corrective and preventive actions.</li><li>Support development of maintenance strategies based on equipment criticality, failure modes, operating conditions, and maintenance history.</li></ul> 8. Vendor &amp; OEM Coordination <ul><li>Participate in vendor selection processes, including technical evaluations, site visits, vendor meetings, and technology reviews.</li><li>Coordinate with OEMs and vendors for resolving specific mechanical equipment problems.</li><li>Review OEM recommendations and assess their applicability to plant mechanical maintenance requirements.</li><li>Evaluate new mechanical maintenance technologies, tools, equipment, and techniques for potential implementation.</li><li>Coordinate vendor technical support during major mechanical maintenance, shutdown, and turnaround activities.</li></ul> 9. HSE, Quality &amp; Compliance <ul><li>Ensure Quality, Safety, Health, and Environmental procedures are complied with by employees, contractors, subcontractors, and vendors.</li><li>Ensure mechanical contractors comply with CLIENT HSE procedures, Permit-to-Work requirements, Method Statements, JSAs, Risk Assessments, and site safety requirements.</li><li>Prepare Method Statements and Job Safety Analysis for critical mechanical maintenance activities.</li><li>Participate in incident investigations and Root Cause Analysis and recommend corrective actions.</li><li>Conduct audits of mechanical work orders, maintenance activities, contractor documentation, and workshop repairs.</li><li>Ensure mechanical maintenance documentation is properly completed, controlled, updated, and maintained in accordance with quality standards.</li><li>Identify unsafe conditions or non-compliant contractor activities and ensure immediate corrective actions are taken.</li></ul> 10. Reporting &amp; Team Leadership <ul><li>Supervise the activities of assigned Senior Planners and planning personnel.</li><li>Prepare daily, weekly, monthly, annual, shutdown, turnaround, contractor performance, and management reports.</li><li>Monitor and report contractor performance, manpower utilization, productivity, schedule compliance, quality, HSE, and cost performance.</li><li>Prepare management reports highlighting progress, delays, risks, resource requirements, contractor issues, and recovery actions.</li><li>Conduct frequent site visits to verify actual work progress and contractor performance.</li><li>Coordinate with other disciplines to complete mechanical maintenance jobs within schedule and budget without compromising safety.</li><li>Keep abreast of developments in mechanical maintenance planning, contract management, reliability, technology, and industry best practices.</li><li>Perform other similar and related duties as assigned by management.</li></ul> MINIMUM REQUIREMENTS FOR THE JOB <ul><li>Bachelor's Degree in Mechanical Engineering and/or recognized certification as a Planning Engineer or equivalent experience.</li><li>Minimum <strong>10 years of relevant industry experience</strong> in maintenance planning within the <strong>Oil &amp; Gas industry</strong>, preferably in mechanical maintenance.</li><li>Proven experience in <strong>Mechanical Maintenance Contract Management and Contractor Management</strong>.</li><li>Strong <strong>site-based mechanical maintenance experience</strong>, including contractor supervision, field execution, shutdowns, turnarounds, and major maintenance activities.</li><li>Proven experience in preparing mechanical maintenance contract <strong>SOWs, technical specifications, BOQs/MTOs, cost estimates, tender documents, and technical bid evaluations</strong>.</li><li>Experience in contractor mobilization, manpower planning, productivity monitoring, progress measurement, KPI/SLA monitoring, variation assessment, and contract closeout.</li><li>Strong experience with mechanical maintenance of rotating and static equipment, piping, valves, pumps, compressors, heat exchangers, tanks, pressure equipment, and associated mechanical systems.</li><li>Strong knowledge of maintenance planning, scheduling, work-pack preparation, resource loading, critical-path analysis, shutdown, and turnaround planning.</li><li>Good knowledge of contractor performance management, tendering, procurement processes, and contract administration interfaces.</li><li>Proven ability to work directly with mechanical contractors and subcontractors in operating Oil &amp; Gas facilities.</li><li>Good knowledge of HSE requirements, Permit-to-Work systems, Method Statements, JSA, Risk Assessments, and field execution practices.</li><li>Good understanding of mechanical equipment reliability, preventive maintenance, critical spares, RCA, failure analysis, and maintenance strategies.</li><li>Good written and oral communication skills. Arabic language skills are an advantage.</li><li>Proven interpersonal, leadership, coordination, negotiation, and relationship-management skills.</li><li>Ability to work effectively in both <strong>office-based planning and site-based mechanical maintenance execution environments</strong>.</li><li>Fully versed with maintenance planning principles and techniques.</li><li>Excellent computer skills, including MS Office and relevant SAP, CMMS/ERP, planning, scheduling, and reporting systems.</li></ul> KEY COMPETENCIES <ul><li>Mechanical Maintenance Planning &amp; Scheduling</li><li>Mechanical Maintenance Contract Management</li><li>Contractor &amp; Subcontractor Management</li><li>Site-Based Mechanical Maintenance Execution</li><li>Shutdown &amp; Turnaround Planning</li><li>Contractor Mobilization &amp; Supervision</li><li>Rotating &amp; Static Equipment Maintenance</li><li>Pumps, Compressors, Valves &amp; Heat Exchangers</li><li>Piping &amp; Mechanical Equipment Maintenance</li><li>Tendering &amp; Technical Bid Evaluation</li><li>SOW &amp; Technical Specification Preparation</li><li>BOQ/MTO &amp; Cost Estimation</li><li>Contractor KPI/SLA Management</li><li>Progress Measurement &amp; Schedule Control</li><li>Variation &amp; Additional Work Assessment</li><li>Manpower &amp; Resource Planning</li><li>HSE &amp; Quality Compliance</li><li>Preventive &amp; Predictive Maintenance</li><li>Reliability &amp; RCA</li><li>Critical Mechanical Spares Planning</li><li>Vendor &amp; OEM Coordination</li><li>Shutdown/Turnaround Execution</li><li>Cross-Functional Team Leadership</li></ul> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking a detail-oriented and innovative Senior Engineer - Drainage to join our team in Doha, Qatar. You will be responsible for executing complex drainage system designs. This position offers the opportunity to work on meaningful infrastructure projects while contributing to the growth and success of our organization.</p><br><ul><li>Design, develop, and independently complete primary drainage system elements for engineering works, ensuring compliance with Qatar building codes and MME standards</li><li>Gather, analyze, and correlate engineering data using established procedures and industry best practices to support project development</li><li>Perform detailed hydraulic calculations, modeling, and testing to validate drainage system performance and efficiency</li><li>Identify discrepancies in engineering results and propose analytical solutions using both standard procedures and innovative modifications</li><li>Manage project timelines and budgets with minimal supervision, demonstrating efficient organization and decisive decision-making</li><li>Mentor and provide technical guidance to entry-level engineers, fostering a collaborative and supportive work environment</li><li>Conduct site assessments and surveys to evaluate drainage requirements and develop comprehensive solutions</li><li>Prepare technical documentation, design drawings, and reports using CAD software and industry-standard tools</li><li>Collaborate with cross-functional teams including architects, contractors, and stakeholders to ensure project success</li><li>Stay current with evolving drainage technologies and best practices to drive continuous improvement</li></ul><br>Qualifications<br><ul><li><strong>Valid MME (Ministry of Municipality and Environment) professional engineering registration/license</strong></li><li><strong>Qatar experience&nbsp;</strong></li><li><strong>Fluent in Arabic and English</strong></li><li>Bachelor's degree in Civil Engineering, Environmental Engineering, or related discipline</li><li>Minimum 12+ years of professional experience in drainage engineering or related infrastructure projects</li><li>Proven expertise in drainage system design, hydraulic modeling, and analysis</li><li>Proficiency with CAD software and engineering design tools</li><li>Strong knowledge of Qatar building codes, regulations, and local environmental standards</li><li>Demonstrated experience managing engineering projects within budget and schedule constraints</li><li>Excellent analytical and problem-solving skills with attention to detail</li><li>Experience mentoring and supervising junior engineering staff</li><li>Strong written and verbal communication skills in English</li><li>Project management capabilities and ability to work independently with minimal supervision</li><li>Familiarity with site assessment methodologies and survey procedures</li><li>Professional commitment to quality, transparency, and ethical engineering practices</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property &amp; buildings, and transportation sectors.</p><br><p><strong>About the Role</strong></p><br><p>We are looking for a HV Electrical Engineer – Primary Substations to work under the Construction Phase Services Business Group in Qatar, providing project management, design review, construction supervision, technical assessment, testing and commissioning support for high-voltage primary substations, in addition to the required building electrical services and associated power infrastructure works.</p><br><p>The HV Electrical Engineer will assist the Project Manager, Resident Engineer and/or Engineering Manager in administering the technical and operational functions of the project. The role will be responsible for the HV primary substation scope apart from building electrical services, including review of design, review of contractor and vendor submissions, coordination with service lines and stakeholders, supervision of electrical works, and ensuring compliance with approved drawings, specifications, contract requirements, utility authority requirements, and relevant international standards.</p><br><p>The HV Electrical Engineer will provide technical leadership for HV primary substation systems, including GIS/AIS switchgear, power transformers, HV cables, protection and control, SCADA/SAS, earthing, lightning protection, power system studies, and interfaces with the building electrical services. The role will also support coordination with civil, structural, mechanical, telecom, utility, vendor and commissioning teams through design, construction, testing, energization and handover.</p><br><p><strong>Roles &amp; Responsibilities</strong></p><br><ul><li>Take lead responsibility for HV primary substation works apart from building electrical services, ensuring proper technical review, site coordination, contractor management, testing, commissioning and authority/interface closeout.</li><li>Assist the PM, RE and/or Engineering Manager in performing contractual and technical duties related to HV primary substations, building electrical services interfaces, and associated power infrastructure works.</li><li>Lead and coordinate the technical review of electrical design submissions, calculations, drawings, specifications, method statements, ITPs, shop drawings, material submittals, RFIs and technical queries.</li><li>Review and verify Single Line Diagrams, protection and control schematics, equipment layouts, cable routing, earthing layouts, lightning protection layouts, interlocking schemes and SCADA/SAS interface documents.</li><li>Review and assess contractor and vendor submissions for GIS/AIS switchgear, power transformers, shunt reactors, HV cables, control and relay panels, numerical relays, RTU/SCADA systems and substation automation systems.</li><li>Review, coordinate and provide technical comments on power system studies, including load flow, short circuit, insulation coordination, dynamic motor starting, transient/dynamic analysis, harmonic analysis, arc flash, EMC/EMI, lightning, earthing and protection coordination studies.</li><li>Monitor construction activities at site and verify that electrical works are carried out in accordance with approved drawings, specifications, contract requirements, quality requirements and safety procedures.</li><li>Coordinate electrical interfaces with civil/structural works, equipment foundations, trenches, cable ducts, building services, telecom systems, utility tie-ins, energization requirements and third-party/vendor packages.</li><li>Witness and review Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), pre-commissioning tests, commissioning procedures, test reports and energization readiness documentation.</li><li>Support protection relay testing, SCADA/SAS integration, IEC 61850 coordination, functional testing, interlocking verification and utility authority inspection requirements.</li><li>Identify, document and follow up technical non-conformances, design gaps, construction issues, interface risks and quality observations until satisfactory closeout.</li><li>Participate in technical meetings, design review workshops, progress meetings, risk reviews and coordination meetings with client, contractors, service lines, vendors and utility authorities.</li><li>Provide technical input for project planning, resource estimation, delivery support, vendor partner engagement and assessment of required expertise based on the awarded proposal and project delivery requirements.</li><li>Ensure compliance with health, safety, environmental, quality and authority requirements during design review, site supervision, testing, commissioning and energization activities.</li><li>Perform other responsibilities associated with this position as may be appropriate.</li><li>Over-Voltage and Insulation Coordination Study</li><li>Load Flow Study</li><li>Dynamic Motor Starting Study</li><li>Shunt Reactor Sizing Study</li><li>Short Circuit Study</li><li>Transient and Dynamic Analysis Study</li><li>Harmonic Analysis Study</li><li>Arc Flash Study</li><li>EMC and EMI Study</li><li>Lightning Study</li><li>Earthing System Study, including step and touch potential assessment</li><li>Protection Coordination Study, including relay setting review and selectivity assessment</li></ul><p><strong>Power System Studies / Engineering Activities</strong></p><br><p><strong>Experience &amp; Qualifications</strong></p><br><ul><li><p>Bachelor’s Degree in Electrical Engineering or equivalent; Master’s Degree in Power Systems Engineering is preferred.</p><br></li><li><p>Minimum 14+ years of overall electrical engineering experience, with significant experience in HV primary substations and transmission/distribution infrastructure projects.</p><br></li><li><p>Proven experience in 132kV, 220kV and/or 400kV substations, including GIS/AIS systems, power transformers, HV cables, protection and control, SCADA/SAS, earthing and lightning protection systems.</p><br></li><li><p>Experience working with Consultants, PMC/CM teams, EPC Contractors, utility authorities and vendor partners on design review, construction supervision, testing, commissioning and energization activities.</p><br></li><li><p>Strong understanding of IEC, IEEE, BS EN and relevant local utility requirements, including experience with Kahramaa and/or other GCC utilities such as SEC, DEWA, TRANSCO, TAQA or OETC.</p><br></li><li><p>Demonstrated ability to review power system studies and technical calculations prepared using ETAP, DIgSILENT PowerFactory, PSCAD, EMTP, CYME or equivalent software.</p><br></li><li><p>Good knowledge of IEC 61850, substation automation, numerical protection relays, relay coordination, RTU/SCADA interfaces and communication systems.</p><br></li><li><p>Experience in FAT/SAT witnessing, commissioning support, test report review, punch list closeout, energization readiness and handover documentation.</p><br></li><li><p>Ability to manage multiple contractors, coordinate multidisciplinary interfaces, resolve technical issues and provide clear recommendations in a PMC/CM environment.</p><br></li><li><p>Strong analytical, communication, report-writing and leadership skills, with the ability to work effectively with client, contractor, service line, delivery and technical services teams.</p><br></li><li><p>Familiarity with BIM/Revit, ACC/Forma Construction, ProjectWise or other digital delivery and document control platforms is preferred.</p><br></li><li><p>Professional certifications such as PMP, Chartered/Professional Engineer status, IEC 61850 training, HV switching authorization, NEBOSH/IOSH or commissioning certifications are preferred.</p><br></li></ul><p><strong>Why Join Us?</strong></p><br><ul><li>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions.</li><li>Join a team that values knowledge-sharing, mentorship, and professional excellence.</li></ul><p><strong>Our Pledge to You</strong></p><br><p>At GHD, we don’t just believe in the power of commitment, we live and breathe it every day.</p><br><p>That’s why we pledge to empower our people to make a positive impact. Combining our deep technical expertise with the capabilities of our clients and partners, we respond to some of the most complex challenges facing our planet today.&nbsp;</p><br><p>See where your commitment could take you.</p><br><p>That’s the&nbsp;<strong>#PowerOfCommitment</strong></p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A leading engineering consultancy is seeking an experienced <strong>Senior Civil Engineer</strong> to support a major infrastructure programme in Qatar.</p><br><br><p>The successful candidate will provide technical oversight and engineering support across civil and infrastructure works, ensuring compliance with project specifications, authority requirements, quality standards and approved designs.</p><br><br><p><strong>Key Responsibilities</strong></p><br><br><ul><li>Review civil engineering designs, drawings, specifications and technical submissions.</li><li>Provide technical supervision and support during project execution.</li><li>Monitor construction activities against approved designs and specifications.</li><li>Review method statements, material submissions and technical documentation.</li><li>Coordinate with contractors, consultants and client representatives.</li><li>Resolve technical and constructability issues.</li><li>Monitor progress and support reporting to project/client management.</li><li>Ensure compliance with relevant engineering standards and authority requirements.</li><li>Support inspection, testing, commissioning and handover activities.</li><li>Coordinate civil works with other engineering disciplines.</li></ul><p><strong>Candidate Requirements</strong></p><br><br><ul><li>Bachelor's degree in Civil Engineering.</li><li>Extensive professional experience in major <strong>civil/infrastructure projects</strong>.</li><li>Strong experience in roads, utilities, drainage and/or municipal infrastructure preferred.</li><li>Previous consultancy/client-side engineering experience advantageous.</li><li>Qatar/GCC infrastructure experience highly desirable.</li><li>Knowledge of applicable international engineering standards.</li><li>Professional/Chartered Engineer status advantageous.</li><li>Strong technical reporting and stakeholder-management capabilities.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Lead the testing and commissioning of electrical systems and equipment.</span><br><span>Perform and supervise insulation resistance, continuity, functional, protection relay, and operational tests.</span><br><span>Troubleshoot electrical faults and recommend corrective actions.</span><br><span>Review electrical drawings, single-line diagrams, schematics, method statements, and commissioning procedures.</span><br><span>Supervise and guide electrical technicians during testing and commissioning activities.</span><br><span>Coordinate energization, isolation, shutdown, and start-up activities.</span><br><span>Ensure testing instruments are calibrated and suitable for use.</span><br><span>Prepare test reports, commissioning records, punch lists, and system handover documentation.</span><br><span>Coordinate with construction, engineering, client, vendor, and operations teams.</span><br><span>Ensure compliance with project HSE requirements, permit-to-work procedures, and electrical safety standards.</span><br></span><br><span>Requirements<span>Bachelor’s degree or diploma in Electrical Engineering.</span><br><span>Minimum 8 years of relevant electrical experience, including significant commissioning experience.</span><br><span>Strong experience in industrial, power, oil and gas, petrochemical, or infrastructure projects.</span><br><span>Sound knowledge of transformers, switchgear, MCCs, motors, generators, UPS systems, cables, protection systems, and control panels.</span><br><span>Strong electrical troubleshooting and fault-finding skills.</span><br><span>Experience leading and supervising teams of electrical technicians.</span><br><span>Ability to read and interpret electrical drawings and technical documents.</span><br><span>Familiarity with electrical testing equipment and commissioning documentation.</span><br><span>Strong knowledge of LOTO, electrical isolation, permit-to-work, and HSE procedures.</span><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Lead mechanical pre-commissioning and commissioning activities.</span><br><span>Commission static equipment, including vessels, tanks, heat exchangers, piping systems, and packaged units.</span><br><span>Commission rotating equipment, including pumps, compressors, turbines, blowers, and fans.</span><br><span>Supervise alignment, flushing, leak testing, pressure testing, lubrication, trial runs, and performance testing.</span><br><span>Troubleshoot vibration, alignment, leakage, mechanical, and performance-related issues.</span><br><span>Review P&amp;IDs, mechanical drawings, equipment datasheets, vendor documents, and commissioning procedures.</span><br><span>Supervise mechanical technicians and coordinate with construction, engineering, operations, vendors, and client teams.</span><br><span>Prepare test reports, punch lists, commissioning records, and handover documentation.</span><br><span>Ensure compliance with PTW, LOTO, isolation, and HSE procedures.</span><br></span><br><span>Requirements<span>Bachelor’s degree or diploma in Mechanical Engineering.</span><br><span>Minimum 8 years of relevant experience, including proven mechanical commissioning experience.</span><br><span>Candidates with only construction, installation, or maintenance experience will not be considered.</span><br><span>Strong knowledge of static and rotating equipment commissioning.</span><br><span>Strong troubleshooting, problem-solving, and team supervision skills.</span><br><span>Ability to interpret P&amp;IDs, equipment drawings, and technical documentation.</span><br><span>Fluent in spoken and written English.</span><br><span>Experience in Oil &amp; Gas and desalination projects will be highly preferred.</span><br></span><br> </div>

<p>Ensure data integrity, accuracy, and security in all dashboard solutions. Ensure optimization &amp; high performance for dashboards Designing and developing interactive dashboards using leading visualization tools Providing ongoing support and enhancements to existing dashboards Data integration across Multiple business units. Querying and aggregating data from various sources, enabling real-time updates Collaborate with stakeholders to understand their business needs Staying updated on industry best practices and continuously optimizing dashboard Select appropriate data visualization techniques Ensure that the dashboard is user-friendly and intuitive, allowing easy navigation and interaction Regularly gather feedback and iterate on the design to continuously improve the dashboardu2019s effectiveness and usability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree 5+ years of experience Working with Web BI dashboard tools such as Qlik Sense, Tableau, Google Data Studio or Power BI working in a complex, matrixed environment Familiar with web technologies such as JavaScript, CSS, Node.js, or Enigma.js, Skills: Strong proficiency in SQL for data extraction and manipulation strong organizational, prioritization, and decision-making A solid understanding of data visualization principles .</p>

<p>Manage project deliverables and coordinate with authorities and stakeholders to achieve project goals. Support planning, definition of project objectives, and development of methods to deliver them, in line with client, contract, and corporate requirements. Lead stakeholder and authority coordination, resolving conflicting requirements to keep approvals and activities on track. Work closely with interdisciplinary teams and report progress, milestones, and risks (cost/schedule) to senior management. Participate in regular design, construction, stakeholder, and authority meetings to review status and define actions. Liaise with stakeholders, consultants, and contractors on design, construction, handover requirements, and execution of handover works. Prepare handover-related reports, manuals, and guidelines as required by the client. Support the Construction Supervision team as PMC representative overseeing contract handovers. Review technical designs, provide comments, and ensure timely review of all consultant/contractor submissions. Coordinate with key stakeholders and authorities to ensure smooth asset handover at completion. Contribute handover and stakeholder inputs to weekly/monthly reports and flag any potential delays to the Project Director. Participate in site safety training, comply with safety protocols, and provide on-site direction to complete handover tasks.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in any Engineering discipline from a reputable institution</li><li>Minimum of 10 years of demonstrable overall experience as a Stakeholder Engineer.</li><li>Proficient keyboard skills and a working knowledge of MS Windows and related word processing, spreadsheet, and database software is required.</li><li>Some assignments may require familiarity with EDMS (Electronic Document Management System) and DMCS (Document and Material Control System), or a familiarity with CAD operations.</li><li>Good written and oral communication in English and Arabic, organizational, and interpersonal skills, as well as a demonstrated ability to work as a member of a team, are prerequisites.</li><li>Must have approved MME or MMUP.</li><li>Experience working in Qatar is required.</li></ul>

<p>Ensure data integrity, accuracy, and security in all dashboard solutions. Ensure optimization &amp; high performance for dashboards Designing and developing interactive dashboards using leading visualization tools Providing ongoing support and enhancements to existing dashboards Data integration across Multiple business units. Querying and aggregating data from various sources, enabling real-time updates Collaborate with stakeholders to understand their business needs Staying updated on industry best practices and continuously optimizing dashboard Select appropriate data visualization techniques Ensure that the dashboard is user-friendly and intuitive, allowing easy navigation and interaction Regularly gather feedback and iterate on the design to continuously improve the dashboardu2019s effectiveness and usability.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements</strong> Education &amp; Experience: Bachelor's degree 5+ years of experience Working with Web BI dashboard tools such as Qlik Sense, Tableau, Google Data Studio or Power BI working in a complex, matrixed environment Familiar with web technologies such as JavaScript, CSS, Node.js, or Enigma.js, Skills: Strong proficiency in SQL for data extraction and manipulation strong organizational, prioritization, and decision-making A solid understanding of data visualization principles .</p>