Radiographer Jobs - Doha Qatar

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

Company Description AL ENJAZAT TECHNICAL WORKS . Co. WLL is a technical services company based in Doha, Qatar, providing specialized support to industrial and automotive clients. The company focuses on delivering reliable maintenance and repair solutions, with an emphasis on diesel systems and related mechanical services. AL ENJAZAT TECHNICAL WORKS . Co. WLL values safety, quality workmanship, and timely service to help customers keep their operations running efficiently. Team members are encouraged to develop their skills and contribute to continuous improvement in service standards. Role Description This is a full-time, on-site role based in Doha, Qatar for a Diesel Pump and Injector Technician. The technician will inspect, diagnose, disassemble, repair, and reassemble diesel fuel pumps and injectors using appropriate tools and testing equipment. Daily tasks include performing calibration and testing, identifying and replacing faulty components, and ensuring all work meets manufacturer specifications and safety standards. The role involves maintaining accurate service records, coordinating with colleagues and supervisors to prioritize jobs, and providing technical support and guidance on diesel system issues. The technician will also help keep the workshop organized, follow health and safety procedures, and occasionally support training of junior team members. Qualifications Supervisory Skills and Team Management skills to oversee workflows, support colleagues, and coordinate tasks in the workshop. Analytical Skills and Technical Support capabilities to diagnose faults, interpret test results, and assist in resolving complex diesel system issues. Strong Communication skills to interact clearly with team members, supervisors, and customers regarding repair status and technical findings. Proven experience repairing and maintaining diesel pumps and injectors, including calibration, testing, and use of specialized diagnostic tools. Vocational diploma or technical certification in automotive engineering, diesel mechanics, or a related field; additional manufacturer-specific training is an advantage. Understanding of safety standards and best practices for working with diesel systems and workshop equipment. Ability to read technical manuals, service bulletins, and diagrams, and to follow structured maintenance procedures. Previous experience in a similar workshop or service center environment in the automotive or industrial sector is preferred.

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><ul><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position:</p><p>Mechanical Technician (Rotating) - (2)</p><p>Date Open:</p><p>Feb 19, 2026</p><p>Closing Date:</p><p>May 31, 2026</p><p>Principal:</p><p>Qatar District Cooling Company</p><p>Country:</p><p>Doha, Qatar</p><p>Qualifications:</p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>· Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.&nbsp; &nbsp; &nbsp; Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2.&nbsp; &nbsp; &nbsp; Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.&nbsp; &nbsp; &nbsp; Air Compressor</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4.&nbsp; &nbsp; &nbsp; AHU fans and blower</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;5.&nbsp; &nbsp; &nbsp; Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;6.&nbsp; &nbsp; &nbsp; Mechanical forklift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;7.&nbsp; &nbsp; &nbsp; Mechanical manlift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;8.&nbsp; &nbsp; &nbsp; Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p><br></p><p>· Supervise, guide, and monitor work done by external vendors.</p><p>· Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>· Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>· Utilize, maintain and safe keep specific tools assigned by company.</p><p>· Maintain proper tools, PPE’s, Spares and provide annual requirements.</p><p>· Respond to emergency situations during or after hours as part of business continuity.</p><p>· Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>· Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>· Participate in QC provided training as deemed fit by management.</p><p>· Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</li><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li><li>Supervise, guide, and monitor work done by external vendors.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours as part of business continuity.</li><li>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</li><li>Where applicable, aid and support to other team members within and across the discipline, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li></ul><p></p></section>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<strong>Key Responsibilities</strong> <p></p> <p> </p> <p> <strong>Preventive &amp; Corrective Maintenance</strong> </p> <p>1. Perform routine preventive and predictive maintenance on field instruments.</p> <p>2. Troubleshoot instrumentation and control system failures.</p> <p>3. Repair and replace defective instruments and control components.</p> <p>4. Maintain calibration records and maintenance reports.</p> <p> <strong>Instrumentation Work</strong> </p> <p> Install, calibrate, and test:</p> <p>o Pressure transmitters</p> <p>o Flow meters</p> <p>o Level transmitters</p> <p>o Temperature instruments</p> <p>o Conductivity analyzers</p> <p>o pH analyzers</p> <p>o Chlorine analyzers</p> <p>o Turbidity analyzers</p> <p> Perform loop checking and signal verification.</p> <p> <strong>Control &amp; Automation Systems</strong> </p> <p> Maintain and troubleshoot PLC, RTU, HMI, SCADA, DCS, and control panels.</p> <p> Assist in commissioning and startup activities.</p> <p> Support control valve testing, tuning, and maintenance.</p> <p> Diagnose communication and network-related control issues.</p> <p> <strong>Qualification Requirements</strong> </p> <p> Diploma or Technical Certificate in:</p> <p>o Instrumentation Engineering</p> <p>o Electronics Engineering</p> <p>o Electrical Engineering</p> <p>o Automation Technology</p> <ul> <li> <p>Additional certifications in PLC/SCADA or instrumentation are advantageous.</p> </li> </ul> <p> <strong>I&amp;C Technician's Key Skills:</strong> </p> <p>1. Knowledge of PROFIBUS communication protocols and troubleshooting</p> <p>techniques.</p> <p>2. Experience with PROFIBUS-based process instrumentation, including pressure</p> <p>transmitters, level transmitters, differential pressure transmitters, and</p> <p>electromagnetic flowmeters (EMF).</p> <p>3. Knowledge of Festo panels, Siemens PLCs, and Yokogawa CENTUM VP DCS.</p> <p>4. Hands-on experience with diagnostic and calibration tools, including ProfiTrace</p> <p>devices, pressure calibrators, and deadweight testers.</p> <p>5. Working experience with analyzer instrumentation, such as chlorine, pH, ORP,</p> <p>hardness, and conductivity analyzers. Ability to read and interpret control wiring</p> <p>diagrams, I/O lists, and P&amp;IDs (Piping and Instrumentation Diagrams).</p> <p>6. Experience in RO (Reverse Osmosis) systems is optional but will be considered an</p> <p>added advantage.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Qatar Galvanizing Co. W.L.L. is looking for an experienced <b>Maintenance Technician / Supervisor</b> to join our Production team. The successful candidate will be responsible for carrying out preventive and corrective maintenance of plant machinery and equipment while supervising maintenance and production activities to ensure smooth operations, minimal downtime, and timely delivery of customer requirements.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Perform preventive and corrective maintenance on plant machinery and equipment to minimize downtime.</li><li>Diagnose and repair production machines, overhead cranes, forklifts, and other equipment used in the galvanizing facility.</li><li>Coordinate with the Production Foreman regarding spare parts and maintenance requirements.</li><li>Execute scheduled preventive maintenance programs to improve equipment reliability.</li><li>Supervise maintenance and production personnel to ensure work is completed safely, efficiently, and within the required timeframe.</li><li>Provide clear work instructions and monitor team performance to ensure compliance with quality and operational standards.</li><li>Oversee the receiving and dispatch of customer materials, ensuring accuracy and timely processing.</li><li>Monitor daily production activities and resolve operational issues that may affect productivity.</li><li>Support the planning and implementation of maintenance strategies to maximize equipment availability.</li><li>Coordinate with the Production Head, Foreman, and Team Leaders to review production targets, maintenance schedules, operational issues, and improvement initiatives.</li><li>Ensure compliance with company safety procedures, quality standards, and operational policies.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>ITI Certificate or Diploma in Mechanical Engineering, Electrical Engineering, Industrial Maintenance, or a related technical discipline.</li><li><b>Minimum 5 years of relevant experience</b> in industrial maintenance, manufacturing, galvanizing, steel fabrication, or heavy industrial environments.</li><li>Experience in maintaining production machinery, cranes, forklifts, motors, pumps, gearboxes, and other industrial equipment.</li><li>Previous supervisory or team-leading experience is preferred.</li><li>Strong troubleshooting and problem-solving skills.</li><li>Good communication and coordination skills.</li><li>Ability to work under pressure in a fast-paced production environment.</li></ul><p><br></p><p><br></p><p><b>Preferred Skills</b></p><ul><li>Preventive &amp; Corrective Maintenance</li><li>Mechanical &amp; Electrical Troubleshooting</li><li>Industrial Equipment Maintenance</li><li>Team Supervision</li><li>Analytical &amp; Problem Solving</li><li>Production Coordination</li><li>Communication Skills</li><li>Safety Awareness</li></ul></div>

<p>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.<br>Carry out maintenance and overhaul of gas turbines, steam turbines, turbo compressors, and reciprocating compressors .<br>Diagnose equipment failures and recommend appropriate repair solutions.<br>Perform dimensional inspections using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.<br>Support reverse engineering activities for worn or damaged components.<br>Read and interpret engineering drawings, technical manuals, and repair procedures.<br>Prepare inspection reports and maintain accurate maintenance documentation.<br>Work closely with machinists and engineering teams during repair and refurbishment activities.<br>Ensure all work is completed in accordance with quality standards, safety procedures, and workshop best practices.<br>Participate in continuous improvement initiatives to enhance workshop efficiency and reliability.</p><p><strong>Desired Candidate Profile</strong></p><div> <p>Diploma or Technical Certification in Mechanical Engineering or a related discipline.</p> <p>Minimum 10 years of experience in rotating equipment maintenance and repair.</p> <p>Hands-on experience with gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong understanding of mechanical fitting, assembly, disassembly, and overhaul techniques.</p> <p>Experience using precision measuring instruments for inspection and quality control.</p> <p>Knowledge of AutoCAD, SolidWorks, Inventor, or similar CAD software is preferred.</p> <p>Good understanding of workshop safety standards and maintenance best practices.</p> <p>Proficiency in Microsoft Office for reporting and documentation.</p> <p>We are looking for an experienced Mechanical Technician with a proven background in rotating equipment maintenance, overhaul, and repair within the energy, oil &amp; gas, power generation, or heavy industrial sectors.</p> <p>Diploma or Technical Certification in Mechanical Engineering or a related technical discipline.</p> <p>Minimum 10 years of hands-on experience in rotating equipment maintenance and repair.</p> <p>Proven experience working on gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong knowledge of dismantling, inspection, assembly, alignment, and overhaul of rotating equipment.</p> <p>Experience using precision measuring instruments including micrometers, verniers, dial gauges, and bore gauges.</p> <p>Ability to read and interpret engineering drawings and technical documentation.</p> <p>Familiarity with reverse engineering and workshop repair processes.</p> <p>Knowledge of CAD software is an added advantage.</p> <p>Strong focus on safety, quality, and continuous improvement.</p> <p>Good communication skills and the ability to work effectively in a multidisciplinary workshop environment.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p><strong>Job Description:</strong> We are seeking an experienced <strong>Specialist Dermatologist</strong> to join our premier medical facility in Doha. The ideal candidate will diagnose and treat various skin, hair, and nail conditions while providing advanced aesthetic and medical dermatology procedures.</p><p><strong>Key Responsibilities:</strong></p><ul><li>Conduct comprehensive consultations for clinical and aesthetic dermatology conditions.</li><li>Perform aesthetic procedures including Botox, fillers, laser treatments, chemical peels, and skin rejuvenation.</li><li>Diagnose and treat dermatological disorders and skin cancers.</li><li>Maintain strict medical compliance and high standards of patient safety.</li></ul><p><strong>Requirements:</strong></p><ul><li><strong>Education:</strong> Medical Degree (MD/MBBS) with Specialization in Dermatology.</li><li><strong>Licensing:</strong> Valid QCHP (DHP) License or active Evaluation Letter as a Specialist Dermatologist in Qatar.</li><li><strong>Experience:</strong> Minimum 3–5 years of clinical and aesthetic practice post-specialization.</li><li><strong>Local Status:</strong> Transferable QID with NOC preferred.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants.</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>JOB PURPOSE / OBJECTIVE Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.?? KEY ACCOUNTABILITIES Routine Duties Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares. Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs). Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment. Ensure that the spares parts used are maintained and available.? Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical. Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site. Takes initiative to identify and implement areas for improvement in HVAC & Lighting. Support emergency planned SD’s and TA related maintenance activities. Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.? Review preventive / Corrective maintenance (PM/CM) checklists as required. Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner. Identify spare parts requirements / material required for equipment overhauling / repairs. Use SAP functionality to plan and execute the scheduled jobs. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc. Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required. Conduct daily toolbox meetings as required.? ? 4.2 KEY ACCOUNTABILITIES Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars. Adhere to and follow all company safety policies, procedures, and Tenets of Operation. Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents. Understand the Q-Safe process and actively participates in accordance with expectations. Actively Participate toolbox meetings and MSCM meetings as required. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Follow up metrics for employee safety performance and to achieve departmental KPI. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required: 2 years Diploma of relevant field. Preferred: Bachelor’s degree in Engineering or relevant Technical degree. Experience Required: 3-5 years of experience in HVAC. Preferred: Experience in Petrochemicals Industry Languages Required: English- proficient. Preferred?:Arabic- working knowledge WORKING RELATIONSHIPS Internal Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group External Vendors, Contractors, and Subcontractors</p>

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Company Description Powertech Trading & Cont WLL specializes in the design, manufacturing, and assembly of low-voltage switchgear and control panels for a wide range of applications. The company delivers main distribution boards, motor control centers, pump control panels, VFD and soft starter solutions, PLC panels, and HVAC control panels, along with metering and lighting control systems. Services extend across project estimation, planning, system design, value engineering, component alignment, and full panel testing and commissioning. Powertech also provides site execution, technical support, modifications, and annual maintenance contracts, offering end‑to‑end solutions for industrial and commercial electrical systems. Team members work in a technically focused environment with opportunities to handle complex control systems and advanced automation technologies. Role Description In this full-time, on-site role based in Doha, Qatar, the VFD and PLC Programming, Troubleshooting, and Maintenance Technician is responsible for programming, configuring, and maintaining variable frequency drives and PLC-based control systems. The technician will install, test, and commission control panels and related instrumentation for motor control centers, pump control panels, HVAC systems, and other automated switchgear assemblies. Daily tasks include diagnosing faults, performing corrective and preventive maintenance, updating logic and parameters, and verifying performance against design specifications. The role involves reading and interpreting electrical drawings, coordinating with project engineers and site teams, and preparing technical reports and documentation. The technician will also support modifications, upgrades, and retrofits to existing systems, ensuring safe, reliable, and efficient operation in line with company standards and client requirements. Qualifications Strong practical skills in VFD programming, parameter configuration, and troubleshooting for motor and pump control applications. Hands-on experience with PLC programming, logic modification, I/O configuration, and integration with instrumentation and control panels. Ability to read and interpret electrical schematics, single-line diagrams, control wiring diagrams, and technical documentation. Knowledge of low-voltage switchgear, MCCs, pump control panels, soft starters, and related protection and control devices. Competence in panel testing, commissioning, fault diagnosis, and preventive maintenance for industrial and commercial electrical systems. Understanding of safety standards, safe work practices, and relevant electrical codes and regulations. Effective communication and teamwork skills, with the ability to collaborate with engineers, supervisors, and site personnel. Diploma or degree in Electrical, Electronics, or Instrumentation Engineering, or a related technical field; relevant certifications in PLC/VFD systems are an advantage. Previous experience in switchgear assembly, control panel manufacturing, or field service roles within industrial automation is preferred. Willingness

<p>Ensure all AV equipment is clean and properly maintained. Install, set up, and configure audio-visual equipment, including projectors, microphones, sound systems, lighting, video monitors, cameras, and video conferencing systems. Ensure all equipment is properly connected and fully functional before events or presentations. Operate and control audio-visual systems during events, ensuring high-quality sound and visuals. Manage live audio mixing, video switching, and lighting during events. Perform routine maintenance on AV equipment to ensure optimal performance. Diagnose and troubleshoot technical issues with AV systems and equipment. Repair or arrange for the repair of faulty equipment. Provide technical support to event organizers, presenters, and users of AV equipment. Assist with setup and operation during live events to ensure smooth delivery. Work closely with event coordinators, IT teams, and other stakeholders to meet the specific needs of each event. Collaborate with team members to manage and monitor the inventory of AV equipment. Maintain accurate records of equipment inventory, repairs, and maintenance schedules. Document setup configurations, operational procedures, and troubleshooting steps. Be fully aware of recreation facilities, evening programs, and shows, including technical concepts and requirements. Manage bands or performers during sound checks, stage setup, and coordination of singer or performer riders.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum of 2 3 years of proven experience in a similar AV Technician role, preferably within luxury hospitality, events, entertainment, or live production environments. Diploma or Certificate in Electrical Engineering, Audio Visual Technology, Electronics, or a related technical discipline is highly advantageous. Strong technical knowledge of professional audio, video, lighting, and conferencing systems, including installation, configuration, operation, and troubleshooting. Proven ability to install, operate, and maintain AV equipment such as PA systems, mixers, amplifiers, projectors, LED screens, microphones (wired and wireless), lighting consoles, and video displays. Hands-on experience with live sound mixing, video switching, lighting control, and show setup for events, conferences, and entertainment programs. Solid understanding of signal flow, cabling, power distribution, and equipment safety standards. Good communication skills in English, with the ability to provide clear technical support to event organizers, performers, presenters, and internal stakeholders. Ability to work independently and collaboratively within a fast-paced, event-driven hospitality environment while meeting operational timelines. Strong analytical and problem-solving skills with attention to detail and a proactive approach to identifying and resolving technical issues. Flexible to work rotating shifts, evenings, weekends, and public holidays in line with operational requirements and event schedules.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment: 1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings). 2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure) 3. Tank (Structures, valves and fittings, air vents) 4. Air handling Units (Filter, ducting, AHU Housing) 5. Filtration system (Filters, housings, pipe and fittings) 6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system 7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems Supervise, guide and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>