Production Technician Jobs

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards.</p><p>Your role</p><ul><li>Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems</li><li>Perform preventive and corrective maintenance as per schedules.</li><li>Diagnose system faults and troubleshoot mechanical, electrical, and control issues.</li><li>Read and interpret drawings, schematics, and technical manuals.</li><li>Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly.</li><li>Monitor system performance and recommend improvements for efficiency.</li><li>Ensure compliance with HSE standards, local codes, and project quality requirements.</li><li>Maintain service reports, maintenance logs, and records.</li><li>Coordinate with supervisors, engineers, and other trades as required.</li><li>Respond to emergency breakdowns when required.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>About you</h2><h3>Qualifications &amp; Experience</h3><ul><li>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent.</li><li>Minimum 3 7 years of hands-on HVAC experience (project/facilities-based).</li><li>Strong knowledge of HVAC mechanical, electrical, and control systems.</li><li>Experience in GCC/UAE projects preferred.</li><li>Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</li></ul><h3>Skills &amp; Competencies</h3><ul><li>HVAC installation, testing &amp; commissioning.</li><li>Preventive &amp; breakdown maintenance.</li><li>Fault diagnosis &amp; troubleshooting.</li><li>Knowledge of refrigerants and handling procedures.</li><li>Ability to work from drawings and method statements.</li><li>Basic electrical &amp; control panel knowledge.</li><li>Good communication and teamwork skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><b>Rotating Technician – Responsibilities</b></span><br></span><ul><li>Perform <b>installation, alignment, and commissioning</b> of rotating equipment such as pumps, compressors, turbines, and motors.<br></li><li>Conduct <b>preventive, predictive, and corrective maintenance</b> of all rotating machinery.<br></li><li>Troubleshoot <b>mechanical faults</b> in rotating systems, including bearings, shafts, couplings, and seals.<br></li><li>Perform <b>vibration analysis, shaft alignment, and balancing</b> to ensure equipment efficiency.<br></li><li>Overhaul and rebuild <b>pumps, compressors, turbines, gearboxes, and motors</b> as required.<br></li><li>Maintain <b>maintenance records, checklists, and reports</b> of all rotating machinery activities.<br></li><li>Follow <b>HSE guidelines</b>, permit-to-work procedures, and safety protocols while working on equipment.<br></li><li>Assist operations and project teams during <b>shutdowns, turnarounds, and emergency repairs</b>.<br></li><li>Ensure <b>spare parts and lubrication</b> are managed correctly for optimal machine performance.<br></li></ul><br><span>Requirements<span><b>Rotating Technician – Requirements</b></span><br></span><ul><li><b>Education:</b> Diploma / ITI / Mechanical Engineering or equivalent technical qualification.<br></li><li><b>Experience:</b> Minimum 4–6 years of hands-on experience in rotating equipment maintenance in oil &amp; gas, power, or industrial plants.<br></li><li>Knowledge of <b>rotating machinery components</b>: pumps, turbines, compressors, motors, gearboxes, fans, and blowers.<br></li><li>Ability to read and interpret <b>mechanical drawings, P&amp;IDs, and alignment diagrams</b>.<br></li><li>Skilled in <b>precision measurement, alignment, and vibration analysis</b>.<br></li><li>Familiarity with <b>industrial maintenance tools and equipment</b>, including laser alignment tools and condition monitoring devices.<br></li><li>Strong understanding of <b>HSE practices</b> and site safety regulations.<br></li><li>Physically fit and able to work in <b>offshore, plant, or high-risk industrial environments</b>.<br></li><li>Good <b>communication, teamwork, and problem-solving skills</b>.<br></li></ul>INTERESTED CANDIDATES CAN SEND CV TO 31313903/ bency@madre-me.com<br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Instrument Technician</b>. Our client is a reputed organization in the Industrial sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform instrument loop checking activities.<br></li><li>Carry out calibration of field instruments.<br></li><li>Execute instrumentation construction activities.<br></li><li>Install, test and commission instrumentation systems.<br></li><li>Troubleshoot instrument faults and ensure system reliability.<br></li><li>Follow project specifications and safety standards.<br></li><li>Coordinate with engineering and maintenance teams.<br></li><li>Maintain calibration and inspection records.<br></li></ul>Required Skills<br><ul><li>Loop Checking – Hands-on commissioning experience.<br></li><li>Instrument Calibration – Accurate calibration of field devices.<br></li><li>Industrial Instrumentation – Maintenance and installation knowledge.<br></li><li>Oil &amp; Gas / Power Plant Experience – Industrial project exposure.<br></li><li>Construction Activities – Instrument installation and testing.<br></li></ul>Preferred Skills<br><ul><li>Commissioning experience.<br></li><li>Knowledge of HSE practices.<br></li><li>Reading P&amp;ID and instrumentation drawings.<br></li></ul>Work Experience Requirements<br><p>Minimum <b>3+ years</b> of experience in loop checking, calibration and instrumentation construction activities in Oil &amp; Gas, Power Plant, Shipyard or similar industrial sectors.<br></p><br>Education<br><ul><li><b>Minimum:</b> ITI / Diploma<br></li><li><b>Preferred:</b> Diploma in Instrumentation/Electrical<br></li><li><b>Additional Certifications:</b> Instrument Calibration or Safety Certifications (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred). Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</p><p>Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

Company Description Powertech Trading & Cont WLL specializes in the design, manufacturing, and assembly of low-voltage switchgear and control panels for a wide range of applications. The company delivers main distribution boards, motor control centers, pump control panels, VFD and soft starter solutions, PLC panels, and HVAC control panels, along with metering and lighting control systems. Services extend across project estimation, planning, system design, value engineering, component alignment, and full panel testing and commissioning. Powertech also provides site execution, technical support, modifications, and annual maintenance contracts, offering end‑to‑end solutions for industrial and commercial electrical systems. Team members work in a technically focused environment with opportunities to handle complex control systems and advanced automation technologies. Role Description In this full-time, on-site role based in Doha, Qatar, the VFD and PLC Programming, Troubleshooting, and Maintenance Technician is responsible for programming, configuring, and maintaining variable frequency drives and PLC-based control systems. The technician will install, test, and commission control panels and related instrumentation for motor control centers, pump control panels, HVAC systems, and other automated switchgear assemblies. Daily tasks include diagnosing faults, performing corrective and preventive maintenance, updating logic and parameters, and verifying performance against design specifications. The role involves reading and interpreting electrical drawings, coordinating with project engineers and site teams, and preparing technical reports and documentation. The technician will also support modifications, upgrades, and retrofits to existing systems, ensuring safe, reliable, and efficient operation in line with company standards and client requirements. Qualifications Strong practical skills in VFD programming, parameter configuration, and troubleshooting for motor and pump control applications. Hands-on experience with PLC programming, logic modification, I/O configuration, and integration with instrumentation and control panels. Ability to read and interpret electrical schematics, single-line diagrams, control wiring diagrams, and technical documentation. Knowledge of low-voltage switchgear, MCCs, pump control panels, soft starters, and related protection and control devices. Competence in panel testing, commissioning, fault diagnosis, and preventive maintenance for industrial and commercial electrical systems. Understanding of safety standards, safe work practices, and relevant electrical codes and regulations. Effective communication and teamwork skills, with the ability to collaborate with engineers, supervisors, and site personnel. Diploma or degree in Electrical, Electronics, or Instrumentation Engineering, or a related technical field; relevant certifications in PLC/VFD systems are an advantage. Previous experience in switchgear assembly, control panel manufacturing, or field service roles within industrial automation is preferred. Willingness

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Primary Purpose Of The Job<br><br>Carries out troubleshooting, maintenance, repair, overhaul and calibration of different types of field instruments installed in any plant/unit of Qatar Energy Refinery as assigned by Lead Instrument Engineer.<br><br>Required Experience And Skills<br><br>At least 6 years of experience as Instrument technician in Refinery, Oil & Gas or petrochemical industry with sound knowledge in measurement principles, installation, commissioning, maintenance and overhauling of various field instruments. Knowledge on hazardous area classification, smart field instruments interface with DCS and PLC is desirable. Knowledge about International Standards and Best practices of Instrumentation in Refining, Oil& Gas and Petrochemical Industries is an added advantage. Should be highly proficient and have excellent command in spoken/written English. Work experience in the Arabian Gulf Countries is desirable.<br><br>Educational Qualifications<br><br>Diploma in Instrumentation/Control Systems Engineering from a well recognized College/University.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are hiring an experienced Mechanical Technician for a workshop-based opportunity in Qatar. The ideal candidate will have 10+ years of hands-on experience in the maintenance, repair, overhaul, and inspection of gas turbines, steam turbines, turbo compressors, and reciprocating compressors. This role involves working in a modern rotating equipment service facility, supporting precision repair and refurbishment activities.</p><br><br> <ul> <li>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.</li> <li>Carry out maintenance and overhaul of <strong>gas turbines, steam turbines, turbo compressors, and reciprocating compressors</strong>.</li> <li>Diagnose equipment failures and recommend appropriate repair solutions.</li> <li>Perform dimensional inspections using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.</li> <li>Support reverse engineering activities for worn or damaged components.</li> <li>Read and interpret engineering drawings, technical manuals, and repair procedures.</li> <li>Prepare inspection reports and maintain accurate maintenance documentation.</li> <li>Work closely with machinists and engineering teams during repair and refurbishment activities.</li> <li>Ensure all work is completed in accordance with quality standards, safety procedures, and workshop best practices.</li> <li>Participate in continuous improvement initiatives to enhance workshop efficiency and reliability.</li> </ul> Qualifications &amp; Experience <ul> <li>Diploma or Technical Certification in Mechanical Engineering or a related discipline.</li> <li>Minimum <strong>10 years of experience</strong> in rotating equipment maintenance and repair.</li> <li>Hands-on experience with <strong>gas turbines, steam turbines, turbo compressors, and reciprocating compressors</strong>.</li> <li>Strong understanding of mechanical fitting, assembly, disassembly, and overhaul techniques.</li> <li>Experience using precision measuring instruments for inspection and quality control.</li> <li>Knowledge of AutoCAD, SolidWorks, Inventor, or similar CAD software is preferred.</li> <li>Good understanding of workshop safety standards and maintenance best practices.</li> <li>Proficiency in Microsoft Office for reporting and documentation.</li> </ul> <ul> <li>Rotating Equipment Maintenance</li> <li>Gas Turbine Repair</li> <li>Steam Turbine Overhaul</li> <li>Turbo Compressor Maintenance</li> <li>Reciprocating Compressor Repair</li> <li>Mechanical Assembly &amp; Disassembly</li> <li>Precision Measurement</li> <li>Dimensional Inspection</li> <li>Reverse Engineering Support</li> <li>Engineering Drawing Interpretation</li> <li>Technical Troubleshooting</li> <li>Teamwork &amp; Communication</li> </ul><br><p>We are looking for an experienced <strong>Mechanical Technician</strong> with a proven background in <strong>rotating equipment maintenance, overhaul, and repair</strong> within the energy, oil &amp; gas, power generation, or heavy industrial sectors.</p><br> <ul> <li>Diploma or Technical Certification in Mechanical Engineering or a related technical discipline.</li> <li>Minimum <strong>10 years of hands-on experience</strong> in rotating equipment maintenance and repair.</li> <li>Proven experience working on <strong>gas turbines, steam turbines, turbo compressors, and reciprocating compressors</strong>.</li> <li>Strong knowledge of dismantling, inspection, assembly, alignment, and overhaul of rotating equipment.</li> <li>Experience using precision measuring instruments including micrometers, verniers, dial gauges, and bore gauges.</li> <li>Ability to read and interpret engineering drawings and technical documentation.</li> <li>Familiarity with reverse engineering and workshop repair processes.</li> <li>Knowledge of CAD software is an added advantage.</li> <li>Strong focus on safety, quality, and continuous improvement.</li> <li>Good communication skills and the ability to work effectively in a multidisciplinary workshop environment.</li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary The Senior Rotating Equipment / Centrifugal Pumps Technician is responsible for leading and executing maintenance, repair, overhaul, and service activities on rotating equipment, with a primary focus on centrifugal pumps.<br> The role supports both workshop and field operations by performing and supervising equipment dismantling, inspection, measurement, assembly, testing, installation, and commissioning activities.<br> The Senior Technician is responsible for diagnosing equipment faults, performing preventive and corrective maintenance, and ensuring all work is executed in accordance with OEM recommendations, quality standards, and HSE requirements.<br> Working closely with engineers, supervisors, and customers, the Senior Technician provides technical guidance to junior personnel, supports troubleshooting and root cause analysis, and contributes to the successful delivery of safe, reliable, and high-quality service solutions.<br> Roles &amp; Responsibilities Perform and lead workshop and site maintenance activities for rotating equipment, primarily centrifugal pumps, including dismantling, inspection, measurement, assembly, testing, installation, and commissioning.<br> Plan and prepare equipment, tools, materials, and spare parts to ensure the efficient execution of maintenance and repair activities.<br> Execute the installation, removal, overhaul, and replacement of centrifugal pumps and associated rotating equipment at customer sites.<br> Perform and verify shaft alignment activities using dial indicators and laser alignment systems in accordance with OEM specifications.<br> Diagnose equipment faults, conduct troubleshooting and root cause analysis, and recommend corrective actions to improve equipment reliability.<br> Maintain accurate service reports, inspection records, job cards, and maintenance documentation.<br> Ensure all work is carried out in compliance with company procedures, quality standards, OEM recommendations, and HSE requirements.<br> Ensure the proper use, calibration, maintenance, and storage of tools, measuring instruments, and equipment.<br> Maintain a safe, clean, and organized work environment in both workshop and field locations.<br> Provide technical guidance and mentorship to junior technicians and support their technical development.<br> Work closely with engineers, supervisors, and customers to deliver safe, reliable, and high-quality maintenance and service solutions.<br> QHSE Responsibilities Ensure all team members are aware of, trained in, and compliant with applicable QHSE standards, regulations, and company policies relevant to their work.<br> Lead by example in promoting a safety-first culture and actively participate in all QHSE meetings, cascading critical safety and environmental information to the team.<br> Take prompt action to correct any unsafe or hazardous conditions and ensure that unresolved issues are escalated appropriately.<br> Review and act on QHSE officer/coordinator observations and recommendations in a timely manner.<br> Ensure all new team members complete their QHSE induction with the HSE Officer before beginning work.<br> Conduct regular reviews of emergency response readiness, including accessibility and usage of PPE and spill kits.<br> Monitor team compliance with safety practices, especially among new or less experienced staff, and provide guidance and support where needed.<br> Encourage active participation in QHSE programs and ensure that staff are given opportunities to contribute to safety improvements Refer OHSMS Manual, section 4.<br>4.1 for additional HSE roles, responsibilities, accountability, and authority Job-Specific Education &amp; Certification Diploma, Technical Certificate, or ITI in Mechanical, or related engineering discipline.<br> Skills &amp; Competencies Role Behavior People - Understand the team's role and how to contribute to the organization's success Delivery - Balances deliveries and ensures goals are achieved in a timely manner Goal Setting - Ensures teams’ goals are Specific, Measurable, Achievable, Relevant and Timely Delegation - Efficiently delegates tasks and follows through until completion Accountability - Takes ownership and impact of decisions Job-Specific Competencies Rotating Equipment &amp; Centrifugal Pump Maintenance &amp; Overhaul Rotating Equipment &amp; Centrifugal Pump Inspection &amp; Assembly Mechanical Seals, Bearings, and Lube systems basic understating Basic Alignment &amp; Measurement Troubleshooting Support HSE Compliance Documentation &amp; Reporting Workshop &amp; Site Operations Teamwork &amp; Communication Skill Good understanding of centrifugal pump operation, components, and basic maintenance principles.<br> Knowledge of mechanical seals, bearings, couplings, and lubrication systems.<br> Ability to read and interpret engineering drawings, assembly drawings, and technical manuals.<br> Familiarity with precision measuring instruments such as vernier calipers, micrometers, and dial indicators.<br> Basic understanding of shaft alignment and rotating equipment balancing principles.<br> Competent in the use of workshop tools, equipment, and safe maintenance practices.<br> Ability to dismantle, clean, inspect, and reassemble rotating equipment in accordance with standard procedures and OEM guidelines.<br> Capable of selecting and using appropriate tools, measuring instruments, and consumables for maintenance activities.<br> Ability to perform equipment inspections, functional checks, and record test results accurately.<br> Skilled in completing maintenance checklists, service reports, and job documentation.<br> Knowledge of LOTO, permit-to-work systems, and general site safety requirements Understanding proper handling, protection, storage, and preservation of equipment components and spare parts.<br> Ability to identify and report equipment defects, maintenance findings, and safety hazards to supervisors.<br> Strong teamwork, communication, and willingness to learn from senior technicians and engineers.<br> Committed to maintaining a safe, clean, and organized work environment in both workshop and field locations.<br> Experience &amp; Requirements Minimum 5-10 years of hands-on experience in the maintenance, repair, overhaul, testing, and troubleshooting of centrifugal pumps (API 610), including OH, BB, and Vertical Pump configurations, as well as other rotating equipment.<br> Proven experience leading workshop and field service activities, including equipment installation, commissioning, and shutdown maintenance projects.<br> Extensive experience performing on-site maintenance and field service operations within the Middle East oil &amp; gas, power, water, or industrial sectors.<br> Demonstrated ability to supervise and mentor junior technicians while ensuring compliance with safety, quality, and OEM standards.<br> Strong troubleshooting and problem-solving skills with the ability to diagnose equipment failures and recommend effective corrective actions</span> </div>

<strong>Summary: </strong> <br> <br>We are hiring a Mechanical Technician Desalination for infrastructure and water sector. The role will support the safe and reliable operation of a large-scale water treatment/desalination facility, with a particular focus on mechanical maintenance of RO systems, pumps, valves, rotating equipment, and associated plant machinery.<p></p> <p>The ideal candidate will have strong hands-on mechanical maintenance experience in desalination, water treatment, power generation, oil &amp; gas, or other industrial environments, with experience troubleshooting and overhauling mechanical equipment.<br> <br> <strong>Key Responsibilities</strong> </p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p>

<p>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.<br>Carry out maintenance and overhaul of gas turbines, steam turbines, turbo compressors, and reciprocating compressors .<br>Diagnose equipment failures and recommend appropriate repair solutions.<br>Perform dimensional inspections using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.<br>Support reverse engineering activities for worn or damaged components.<br>Read and interpret engineering drawings, technical manuals, and repair procedures.<br>Prepare inspection reports and maintain accurate maintenance documentation.<br>Work closely with machinists and engineering teams during repair and refurbishment activities.<br>Ensure all work is completed in accordance with quality standards, safety procedures, and workshop best practices.<br>Participate in continuous improvement initiatives to enhance workshop efficiency and reliability.</p><p><strong>Desired Candidate Profile</strong></p><div> <p>Diploma or Technical Certification in Mechanical Engineering or a related discipline.</p> <p>Minimum 10 years of experience in rotating equipment maintenance and repair.</p> <p>Hands-on experience with gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong understanding of mechanical fitting, assembly, disassembly, and overhaul techniques.</p> <p>Experience using precision measuring instruments for inspection and quality control.</p> <p>Knowledge of AutoCAD, SolidWorks, Inventor, or similar CAD software is preferred.</p> <p>Good understanding of workshop safety standards and maintenance best practices.</p> <p>Proficiency in Microsoft Office for reporting and documentation.</p> <p>We are looking for an experienced Mechanical Technician with a proven background in rotating equipment maintenance, overhaul, and repair within the energy, oil &amp; gas, power generation, or heavy industrial sectors.</p> <p>Diploma or Technical Certification in Mechanical Engineering or a related technical discipline.</p> <p>Minimum 10 years of hands-on experience in rotating equipment maintenance and repair.</p> <p>Proven experience working on gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong knowledge of dismantling, inspection, assembly, alignment, and overhaul of rotating equipment.</p> <p>Experience using precision measuring instruments including micrometers, verniers, dial gauges, and bore gauges.</p> <p>Ability to read and interpret engineering drawings and technical documentation.</p> <p>Familiarity with reverse engineering and workshop repair processes.</p> <p>Knowledge of CAD software is an added advantage.</p> <p>Strong focus on safety, quality, and continuous improvement.</p> <p>Good communication skills and the ability to work effectively in a multidisciplinary workshop environment.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p><br><p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p><br><br>Job Description<br><br><ul><li>Carry out preventive maintenance, repair or retrofit of all type of A/C &amp; Refrigeration work</li><li>Record and analyze operating logs and utilities. Take immediate measures as necessary during emergencies in repair works</li><li>Responsible to work closely with HVAC Technician when need arises</li><li>Carry out improvement, maintenance and repair work on all building services and A/C &amp; Refrigeration equipment’s according to the standards and requirements</li><li>Perform daily start-up, shutdown and inspection of building services and equipment as per the standards and requirements</li><li>Maintain tools and equipment, and perform engineering housekeeping work</li><li>Update daily maintenance log, complete the work order forms &amp; keep the work place clean tidy and well organized</li><li>Attend to complaints from Hotel guests and other departments</li><li>Consistently offer professional, engaging and friendly service</li></ul><br>Qualifications<br><br><ul><li>Experience in a similar position, preferably in a 5-star hotel or comparable organization</li><li>Strong interpersonal skills</li><li>Good English written, and verbal communication skills</li><li>Ability to work efficiently under pressure in a fast-paced environment</li><li>Team-oriented with a focus on guest satisfaction and professionalism</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled HVAC Technician to join our dynamic team in Qatar. This role is pivotal in ensuring the optimal performance of heating, ventilation, and air conditioning systems within our facilities. As an HVAC Technician, you will be responsible for installing, maintaining, and repairing HVAC systems, providing you with the opportunity to enhance your technical skills while contributing to a collaborative work environment. Our company values innovation and excellence, making it an exciting time to join our team.</p><p>In this position, you will not only apply your technical expertise but also engage in continuous learning and professional development. We prioritize the growth of our employees, offering training programs that keep you updated on the latest HVAC technologies and practices. This commitment to your career progression ensures that you will have the opportunity to advance within our organization, taking on more complex projects and leadership roles as you gain experience.</p><p>Our team culture fosters collaboration and support, where every member's contribution is valued. You will work alongside experienced professionals who are eager to share their knowledge and insights, creating an environment where you can thrive. If you're passionate about HVAC systems and looking for a role that offers both personal and professional growth, we invite you to apply and become a part of our innovative team.</p><p><b>Responsibilities:</b></p><ol><li>Install and configure HVAC systems according to specifications and safety standards, ensuring optimal performance and energy efficiency for residential and commercial clients.</li><li>Conduct routine maintenance checks and troubleshooting on HVAC systems, utilizing diagnostic tools to identify issues and implement solutions promptly.</li><li>Repair and replace faulty components in HVAC systems, ensuring minimal downtime and restoring comfort for clients in a timely manner.</li><li>Maintain accurate records of service calls, repairs, and maintenance activities, contributing to the overall efficiency of the service department.</li><li>Collaborate with team members to develop effective strategies for system upgrades and improvements, enhancing the overall service delivery.</li><li>Provide exceptional customer service by communicating effectively with clients regarding system performance, maintenance needs, and energy-saving tips.</li><li>Stay updated on industry trends and advancements in HVAC technology, participating in training sessions to enhance technical skills and service offerings.</li><li>Adhere to all safety regulations and guidelines while working in various environments, ensuring the well-being of yourself and others.</li><li>Assist in the training and mentoring of junior technicians, sharing knowledge and best practices to foster a culture of continuous learning.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in HVAC system installation and maintenance, ensuring systems operate efficiently and effectively.</li><li>Strong troubleshooting skills, enabling quick identification and resolution of HVAC system issues.</li><li>Excellent customer service skills, fostering positive relationships with clients and ensuring their satisfaction.</li><li>Knowledge of safety protocols and regulations, ensuring compliance during HVAC operations.</li><li>Ability to work collaboratively within a team, contributing to a supportive and productive work environment.</li><li>Strong communication skills, effectively conveying technical information to clients and team members.</li><li>Commitment to ongoing professional development, staying current with industry advancements and technologies.</li></ul></div>

Job Location<br><br>Anantara Hotels & Resorts is a global luxury hotel and resort brand rooted in Thai culture, with an intrinsic sense of authentic hospitality. Inspired by the Sanskrit word meaning ‘without end’, our spirit embodies freedom, movement, and harmony. We believe every journey should leave a lasting impression — for our guests and for our people. Founded in 2001 in Thailand, we have since expanded across the world, welcoming guests in some of the world’s most captivating locales — from pristine beaches and private islands to ancient sites and vibrant metropolises. If you are driven by a passion for generosity, warmth and heartfelt hospitality, Anantara offers a career without limits.<br><br>Position Overview<br><br>The Multi Technician is responsible for carrying out preventive and corrective maintenance across the property, ensuring that all facilities, equipment, guest rooms, public areas, and back-of-house areas are maintained in safe, efficient, and reliable working condition.<br><br>The role requires a versatile technician with practical knowledge across multiple maintenance disciplines, including electrical, plumbing, HVAC, carpentry, painting, and general building maintenance.<br><br>Key Responsibilities<br><br>Carry out daily maintenance, repair, and troubleshooting activities throughout the property. Perform preventive maintenance according to the established maintenance schedule. Attend to maintenance requests and breakdowns promptly, particularly those affecting guest rooms and guest areas. Carry out basic electrical repairs, including lighting, switches, sockets, and other electrical fixtures. Perform basic plumbing repairs, including leaking taps, pipes, toilets, drains, and other plumbing fixtures. Conduct basic HVAC inspections, troubleshooting, and maintenance where required. Undertake minor carpentry, painting, tiling, and general building repairs. Inspect equipment, machinery, fixtures, and facilities and report any defects or potential problems. Ensure all maintenance work is completed safely and to the required quality standards. Follow all health, safety, environmental, and property procedures. Maintain proper records of completed maintenance work and report outstanding issues to the supervisor. Respond to emergency maintenance situations and breakdowns as required. Coordinate with other engineering team members and departments to ensure smooth daily operations. Maintain tools, equipment, and the engineering workshop in a clean and organized condition. Ensure spare parts and materials are used responsibly and report replenishment requirements. Support energy and water conservation initiatives across the property. Carry out any other reasonable duties assigned by the Engineering Supervisor or Chief Engineer.<br><br>Required Qualifications & Experience<br><br>Technical qualification or vocational training in electrical, mechanical, HVAC, plumbing, or a related field. Previous experience in a multi-technician, maintenance, engineering, or similar role. Previous hotel, resort, residential, or commercial property experience is preferred. Good practical knowledge of general building maintenance. Ability to troubleshoot and repair basic electrical and plumbing systems. Basic knowledge of HVAC and mechanical systems. Ability to use common maintenance tools and equipment safely. Good understanding of health and safety procedures.<br><br>Key Competencies<br><br>Strong troubleshooting and problem-solving skills.<br><br>Good technical and practical skills.<br><br>Ability to work independently and as part of a team.<br><br>Good communication and interpersonal skills.<br><br>Ability to prioritize tasks and respond effectively to urgent maintenance requests.<br><br>Attention to detail and commitment to quality.<br><br>Flexible and willing to work shifts, weekends, and public holidays when required.<br><br>Physically fit and able to perform hands-on maintenance work.<br><br>Positive attitude and service-oriented approach.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Anantara Hotels & Resorts is a global luxury hotel and resort brand rooted in Thai culture, with an intrinsic sense of authentic hospitality. Inspired by the Sanskrit word meaning ‘without end’, our spirit embodies freedom, movement, and harmony. We believe every journey should leave a lasting impression — for our guests and for our people.<br><br>Founded in 2001 in Thailand, we have since expanded across the world, welcoming guests in some of the world’s most captivating locales — from pristine beaches and private islands to ancient sites and vibrant metropolises. If you are driven by a passion for generosity, warmth and heartfelt hospitality, Anantara offers a career without limits.<br><br>Position Overview<br><br>The Multi Technician is responsible for carrying out preventive and corrective maintenance across the property, ensuring that all facilities, equipment, guest rooms, public areas, and back-of-house areas are maintained in safe, efficient, and reliable working condition.<br><br>The role requires a versatile technician with practical knowledge across multiple maintenance disciplines, including electrical, plumbing, HVAC, carpentry, painting, and general building maintenance.<br><br>Key Responsibilities<br><br>Carry out daily maintenance, repair, and troubleshooting activities throughout the property. Perform preventive maintenance according to the established maintenance schedule. Attend to maintenance requests and breakdowns promptly, particularly those affecting guest rooms and guest areas. Carry out basic electrical repairs, including lighting, switches, sockets, and other electrical fixtures. Perform basic plumbing repairs, including leaking taps, pipes, toilets, drains, and other plumbing fixtures. Conduct basic HVAC inspections, troubleshooting, and maintenance where required. Undertake minor carpentry, painting, tiling, and general building repairs. Inspect equipment, machinery, fixtures, and facilities and report any defects or potential problems. Ensure all maintenance work is completed safely and to the required quality standards. Follow all health, safety, environmental, and property procedures. Maintain proper records of completed maintenance work and report outstanding issues to the supervisor. Respond to emergency maintenance situations and breakdowns as required. Coordinate with other engineering team members and departments to ensure smooth daily operations. Maintain tools, equipment, and the engineering workshop in a clean and organized condition. Ensure spare parts and materials are used responsibly and report replenishment requirements. Support energy and water conservation initiatives across the property. Carry out any other reasonable duties assigned by the Engineering Supervisor or Chief Engineer.<br><br>Required Qualifications & Experience<br><br>Technical qualification or vocational training in electrical, mechanical, HVAC, plumbing, or a related field. Previous experience in a multi-technician, maintenance, engineering, or similar role. Previous hotel, resort, residential, or commercial property experience is preferred. Good practical knowledge of general building maintenance. Ability to troubleshoot and repair basic electrical and plumbing systems. Basic knowledge of HVAC and mechanical systems. Ability to use common maintenance tools and equipment safely. Good understanding of health and safety procedures.<br><br>Key Competencies<br><br>Strong troubleshooting and problem-solving skills. Good technical and practical skills. Ability to work independently and as part of a team. Good communication and interpersonal skills. Ability to prioritize tasks and respond effectively to urgent maintenance requests. Attention to detail and commitment to quality. Flexible and willing to work shifts, weekends, and public holidays when required. Physically fit and able to perform hands-on maintenance work. Positive attitude and service-oriented approach.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>The Buggy Technician is responsible for the inspection, maintenance, troubleshooting, and repair of electric and gasoline-powered buggies/golf carts used in operations, hospitality, events, resorts, airports, or industrial facilities.<br><br>Key Responsibilities<br><br>Perform preventive maintenance on buggies/golf carts. Diagnose electrical, mechanical, and hydraulic faults. Repair batteries, motors, controllers, brakes, steering, suspension, and lighting systems. Conduct routine inspections and safety checks. Replace defective parts and components. Maintain charging systems and battery health. Keep maintenance records and service reports updated. Ensure vehicles are clean, operational, and available for daily use. Respond quickly to breakdowns and emergency repair requests. Follow workplace safety and manufacturer guidelines.<br><br>Qualifications<br><br>Diploma/ITI in Mechanical or Electrical Engineering preferred. Experience in golf cart, buggy, or small vehicle maintenance. Knowledge of electric vehicle systems and battery troubleshooting. Ability to use diagnostic tools and repair equipment. Basic understanding of wiring diagrams and technical manuals. Valid driving license preferred.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>The Buggy Technician is responsible for the inspection, maintenance, troubleshooting, and repair of electric and gasoline-powered buggies/golf carts used in operations, hospitality, events, resorts, airports, or industrial facilities.<br><br>Key Responsibilities<br><br>Perform preventive maintenance on buggies/golf carts. Diagnose electrical, mechanical, and hydraulic faults. Repair batteries, motors, controllers, brakes, steering, suspension, and lighting systems. Conduct routine inspections and safety checks. Replace defective parts and components. Maintain charging systems and battery health. Keep maintenance records and service reports updated. Ensure vehicles are clean, operational, and available for daily use. Respond quickly to breakdowns and emergency repair requests. Follow workplace safety and manufacturer guidelines.<br><br>Qualifications<br><br>Diploma/ITI in Mechanical or Electrical Engineering preferred. Experience in golf cart, buggy, or small vehicle maintenance. Knowledge of electric vehicle systems and battery troubleshooting. Ability to use diagnostic tools and repair equipment. Basic understanding of wiring diagrams and technical manuals. Valid driving license preferred.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p><strong>"Why work for Banyan Tree Doha?</strong><br>Be a part of the mosaic team, located in the heart of Mushaireb, Banyan Tree Doha offers an urban retreat that blends unparalleled luxury with modern comfort and architectural marvels. Our property offers a unique blend of Eastern and Western hospitality in an atmosphere of timeless elegance that goes beyond comfortable and stylish rooms, with unmatched sea and city views.</p><br><br>Job Description<br><br><p>As a Kitchen &amp; Laundry Technician , you will be responsible for maintaining and servicing all kitchen and laundry equipment to the highest standards of excellence. Your role is critical to ensuring seamless operations across our culinary and housekeeping departments, directly supporting our commitment to exceptional guest experiences.</p><br><br>Qualifications<br><br><ul><li>Inspect, maintain, and repair kitchen equipment including ovens, stoves, grills, refrigerators, freezers, dishwashers, and exhaust systems to premium operational standards</li><li>Maintain and service laundry equipment including washers, dryers, steamers, and ironers to ensure consistent quality and efficiency</li><li>Perform preventive maintenance according to established schedules to minimize equipment downtime and ensure uninterrupted service delivery</li><li>Respond promptly to urgent repair requests from kitchen and housekeeping departments to maintain guest satisfaction</li><li>Diagnose faults in electrical and mechanical systems and execute necessary repairs or recommend equipment replacements</li><li>Coordinate with specialized vendors for complex repairs and parts procurement to maintain equipment integrity</li><li>Ensure strict compliance with health, safety, and fire regulations related to all electrical and gas-powered appliances</li><li>Maintain comprehensive documentation of all maintenance activities and equipment service history for audit and compliance purposes</li><li>Assist in the installation and setup of new equipment when required</li><li>Maintain a clean, organized, and safe maintenance workshop and tool inventory</li></ul> </div>

Essential Responsibilities:<br><br>The designee shall be qualified to install, operate, maintain, troubleshoot, and repair heating, ventilation, air conditioning and refrigeration (HVAC/R) systems. Performs scheduled periodic maintenance and seasonal overhaul on systems and components to ensure maximum efficiency. Performs planning activities, and facility surveys. Manages HVAC/R fuel emissions and refrigerant handling programs and activities to support various ACCOM II systems identified in Table 4.5.1 – C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support, Table 4.5.5 Regional Maintenance Center O&M and Support Equipment.<br><br>Minimum Position Knowledge, Skills, and Abilities Required:<br><br>High School diploma or GED. Must have applicable CFC/EPA certification such as Section 608 Certification (Universal). Formal HVAC/R training such as; military technical training school, vocational college, and/or a four (4) year apprentice program with experience in HVAC/R maintenance and repair. Four (4) years of practical experience with equipment the technician will maintain. Ability to obtain and maintain a US CENTCOM Medical Exam Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.