Mechanical Drafts Man Jobs in Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Assist in preventive and corrective maintenance of pumps, motors, valves, pipelines, pressure vessels, and other mechanical equipment.</p><p>• Support technicians during equipment overhauling, alignment, dismantling, and assembly activities.</p><p>• Carry tools, spare parts, and maintenance materials to work locations.</p><p>• Clean and maintain mechanical workshops, equipment rooms, and work areas.</p><p>• Assist in lubrication, inspection, and routine servicing of plant equipment.</p><p>• Help with installation and replacement of gaskets, bearings, seals, and pipe fittings.</p><p>• Participate in plant shutdown and startup activities under supervision.</p><p>• Follow lockout/tagout (LOTO) and other safety procedures.</p><p>• Report equipment abnormalities, leaks, unusual noises, or defects to supervisors.</p><p>• Support housekeeping and ensure work areas remain clean and safe.</p><p>• Assist in handling and moving equipment using proper lifting techniques and tools.</p><p>• Maintain maintenance records and complete assigned work orders when required.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Basic knowledge of mechanical tools and equipment.</p><p>• Ability to read simple mechanical drawings is an advantage.</p><p>• Understanding of workplace safety practices.</p><p>• Physically fit and able to work in industrial environments.</p><p>• Ability to work in shifts and as part of a team.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><p><br></p><p>Educational Requirements</p><p>• High School / Secondary School Certificate.</p><p>• ITI, Diploma, or vocational training in Mechanical Engineering, Fitter, or related trade preferred.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Description - Mechanical Engineer</strong><br> <br> <strong>Job Purpose:</strong><br> To provide technical/ engineering supports to Maintenance, Operations and Supply departments in order to carry out improvement of reliability, costs, efficiency, optimization of maintenance execution, failure and troubleshooting investigations.<br> <strong>Required Qualification and Experience: </strong><br> Bachelor in Engineering (Mechanical) from a recognized university with minimum 10 years of experience in similar responsibility in oil and gas or petrochemical environment related to Engineering, Plant construction, pre-commissioning, commissioning and startup of the plants. <br> <strong>Reporting and Relationships</strong><strong>:</strong><br> &nbsp;<ul><li>Works with other Maintenance Support Discipline Engineers, RCM Engineers and Reliability Engineers. Liaise with Maintenance, Operations, Engineering, Supply and other supporting departments and has to contact with vendors and equipment manufacturers to obtain information and as required.</li><li>Works independently on broad assignments with professional engineering principles and standards covering all areas of the onshore plant, storage and terminal facilities and support to offshore.</li></ul><br> <strong>Job Context &amp; Major Challenge(s):</strong><br> &nbsp;<ul><li>Defining expectation for ensuring that all plant and equipment are maintained for high reliability, in optimum operating condition and that the value of Company assets is protected and enhanced.</li><li>Reviewing and setting standards and expectations of maintenance activities to achieve maximum production reliability and availability.</li><li>Work covers all areas of the onshore plant, storage and terminal facilities and some support to offshore. Much of the work involves close collaboration with Operation, Process, Supply and other Engineering divisions.</li></ul><br> <strong>Key Job Accountabilities:</strong><ul><li>Review capital spares status and provides recommendations for preservation and upkeep</li><li>Review and recommends min / max spare parts level for non-moving, obsolete, surplus, spares and consolidate and updates the files on a continuous basis.</li><li>Review Recommended Spare Parts lists (RSPL) and recommend spare parts for all new projects.</li><li>Review stock that has passed shelf life still held in the stock and recommend to replenish or scrap as necessary.</li><li>To carryout Technical Bid Evaluation (TBE) of the offer provided by Buyer/supply department for the spares of mechanical equipment (rotating and static equipment)</li><li>Review all Interface agreements between new projects and existing operations related to Mechanical Discipline from maintenance perspective.</li><li>Carry out engineering feasibility study (eMOC – management of change) in coordination with required disciplines and develop mitigation solution for Obsolescence Management to upgrade obsolete mechanical equipment &amp; its components (such as pumps, compressors, vessels, valves, gaskets etc.).</li><li>Exposure to Obsolescence Management for equipment and Spares will be an advantage.</li><li>Review of all mechanical Master Data Governance (MDG) studies (Material creation, change, deletion and obsolete) through SAP.</li></ul><br> <br> <strong>Discipline Expertise:</strong><br> &nbsp;<ol><li>Mechanical Engineering domain knowledge for below Equipment/systems such as Pumps, Compressors, Gas Turbines, Blowers, Heat exchangers, Valves, Loading arms and ship loaders etc.</li><li>Computer literate with knowledge of SAP and commonly used Microsoft business software packages</li><li>Good adaptability to multinational environment, with wide exposure to various cultures and customs.</li></ol><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support Expansion Project Mechanical activities for pre-commissioning, commissioning, preservation and start-up tasks and conduct Mechanical field maintenance activities safely, including preventive, predictive and breakdown maintenance to ensure reliability and availability of Company Assets (North, South, RLTO &amp; Refining, Barzan and NFE facilities.</p><p><strong>Key Job Accountabilities - I</strong></p><ul><li>Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities.</li><li>Perform preventive and corrective maintenance work on field Mechanical equipment as directed in the field and workshop in line with safe work practices.</li><li>Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan.</li><li>Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace.</li><li>Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor.</li><li>Participates in troubleshooting of Mechanical field issues, as directed and guided by Foreman/Supervisor and issues timely reports.</li><li>Review the Piping &amp; Instrument Diagram and Drawings (P&amp;IDs,) loop drawings, hook-up drawings, Mechanical Index, Mechanical datasheets, logic diagrams and other documents required to tackle issues related to Mechanical field.</li><li>Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS).</li><li>Participates in Regular Toolbox meeting with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe and observation cards</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Completion of Secondary School education followed by vocational training program (TAFE).</p><p><strong>Knowledge and/or Experience - I</strong></p><ul><li>3 years experience as a technician in the Oil &amp; Gas or Petrochemical industry</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall be able to perform all the tasks of mechanical maintenance department. Following are the few listed jobs but not limited to</p><p>Perform and assist preventive maintenance, corrective maintenance and overhauling of all the mechanical equipment of power plant.</p><p>Should have knowledge of different types of valves, pumps, compressors, turbines, heat recovery steam generators, pipelines, pipe hangers, steam traps and all other mechanical equipment.</p><p>Shall be able to perform inspection/maintenance of tanks, heat recovery steam generators, MSF evaporators, condensers, etc.</p><p>Should have knowledge of special tools, hydraulic tools, pneumatic tools, power tools, lifting gears and hand tools.</p><p>Should be proactive in nature.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 08 years of experience required in the large industry out of those 04 years shall be in power plant and or desalination plant.</p><p>Able to Read, Write and Speak in English</p><p>Shall have knowledge of various mechanical equipment, overhauling/maintenance.</p><p></p></section>

Job Title: Senior Mechanical Engineer (HVAC – Design) - UPDA certified Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design and development of HVAC (air conditioning and ventilation) systems for construction projects, ensuring efficient, compliant, and high-quality mechanical design solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. HVAC Design & Engineering<br> Lead HVAC system design including cooling load calculations, duct sizing, equipment selection, and system layouts.<br> Develop design concepts and detailed mechanical drawings for air conditioning and ventilation systems.<br> Ensure energy-efficient and cost-effective design solutions.<br> B. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of HVAC systems within overall building design.<br> Resolve design clashes and technical issues.<br> C. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), ASHRAE standards, and local authority regulations.<br> Prepare and review design submissions for approvals.<br> D. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Conduct design reviews and value engineering exercises.<br> E. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure proper installation and compliance with design.<br> Assist in testing & commissioning of HVAC systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification mandatory<br> 10–12 years of experience in HVAC design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in HVAC design (chilled water systems, VRF, ventilation systems, etc.)<br> Proficiency in software: HAP, Auto CAD, Revit, BIM tools<br> Strong knowledge of ASHRAE standards and local codes

Job Title: Senior Mechanical Engineer (HVAC – Design) - UPDA certified Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design and development of HVAC (air conditioning and ventilation) systems for construction projects, ensuring efficient, compliant, and high-quality mechanical design solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. HVAC Design & Engineering<br> Lead HVAC system design including cooling load calculations, duct sizing, equipment selection, and system layouts.<br> Develop design concepts and detailed mechanical drawings for air conditioning and ventilation systems.<br> Ensure energy-efficient and cost-effective design solutions.<br> B. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of HVAC systems within overall building design.<br> Resolve design clashes and technical issues.<br> C. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), ASHRAE standards, and local authority regulations.<br> Prepare and review design submissions for approvals.<br> D. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Conduct design reviews and value engineering exercises.<br> E. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure proper installation and compliance with design.<br> Assist in testing & commissioning of HVAC systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification mandatory<br> 10–12 years of experience in HVAC design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in HVAC design (chilled water systems, VRF, ventilation systems, etc.)<br> Proficiency in software: HAP, Auto CAD, Revit, BIM tools<br> Strong knowledge of ASHRAE standards and local codes

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>The Principal Mechanical Engineer is the senior technical owner for catheter components in the portfolio.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Own system-level mechanical architecture for console and cart platforms, including structures, enclosures, mechanisms, thermal management, serviceability, and manufacturability. Lead design and development of plastic/composite parts using injection molding and RIM molding; drive DFM/DFS and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, trade studies, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems.<br><br><br>Education & Work Experience:<br><br>B. S. or M. S. in Mechanical Engineering or closely related discipline.15+ years of experience in complex capital equipment or electro-mechanical product development, including regulated products. Direct experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Demonstrated track record as a lead/principal engineer or product design owner for console or cart-based systems from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Advanced Solid Works proficiency. Experience leading cross-functional development in a regulated environment. Background in large console/cart systems that integrate fluid handling, power, and complex electronics.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>The Principal Mechanical Engineer is the senior technical owner for catheter components in the portfolio.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Own system-level mechanical architecture for console and cart platforms, including structures, enclosures, mechanisms, thermal management, serviceability, and manufacturability. Lead design and development of plastic/composite parts using injection molding and RIM molding; drive DFM/DFS and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, trade studies, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems.<br><br><br>Education & Work Experience:<br><br>B. S. or M. S. in Mechanical Engineering or closely related discipline.15+ years of experience in complex capital equipment or electro-mechanical product development, including regulated products. Direct experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Demonstrated track record as a lead/principal engineer or product design owner for console or cart-based systems from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Advanced Solid Works proficiency. Experience leading cross-functional development in a regulated environment. Background in large console/cart systems that integrate fluid handling, power, and complex electronics.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

We're Hiring: Mechanical Supervisor - Lifting Equipment & Engine Overhaul<br><br>We are seeking an experienced Mechanical Supervisor to lead maintenance, repair, troubleshooting, inspection, and overhaul activities for heavy lifting equipment and diesel engines.<br><br>Key Responsibilities:<br><br>✅ Supervise maintenance and repair of:<br><br>Mobile Cranes Forklifts Telehandlers Scissor Lifts Boom Lifts / Manlifts<br><br>✅ Oversee diesel engine overhaul and rebuilding activities<br><br>✅ Lead troubleshooting, inspections, and root cause analysis<br><br>✅ Ensure compliance with HSE standards and lifting equipment safety regulations<br><br>✅ Supervise and mentor mechanics, hydraulic technicians, welders, and electricians<br><br>✅ Manage maintenance documentation, reporting, spare parts coordination, and KPI tracking<br><br>✅ Coordinate with operations, procurement, OEM representatives, and third-party inspectors<br><br>Requirements<br><br>Requirements:<br><br>???? Diploma or Degree in Mechanical Engineering, Heavy Equipment Engineering, or a related field<br><br>???? 7-10 years of experience in maintenance and repair of heavy lifting equipment<br><br>???? 3-5 years of supervisory experience<br><br>???? Hands-on expertise with:<br><br>Mobile Cranes Forklifts Telehandlers Scissor Lifts & Manlifts Diesel Engine Overhaul<br><br>???? Strong knowledge of:<br><br>Hydraulic Systems Diesel Engines Transmission & Brake Systems Electrical/Electronic Control Systems Load Handling Equipment<br><br>???? Ability to read hydraulic and electrical schematics and interpret OEM manuals<br><br>Preferred Industry Experience:<br><br>Construction | Oil & Gas | Industrial Services | Equipment Rental

We're Hiring: Mechanical Supervisor - Lifting Equipment & Engine Overhaul<br><br>We are seeking an experienced Mechanical Supervisor to lead maintenance, repair, troubleshooting, inspection, and overhaul activities for heavy lifting equipment and diesel engines.<br><br>Key Responsibilities:<br><br>✅ Supervise maintenance and repair of:<br><br>Mobile Cranes Forklifts Telehandlers Scissor Lifts Boom Lifts / Manlifts<br><br>✅ Oversee diesel engine overhaul and rebuilding activities<br><br>✅ Lead troubleshooting, inspections, and root cause analysis<br><br>✅ Ensure compliance with HSE standards and lifting equipment safety regulations<br><br>✅ Supervise and mentor mechanics, hydraulic technicians, welders, and electricians<br><br>✅ Manage maintenance documentation, reporting, spare parts coordination, and KPI tracking<br><br>✅ Coordinate with operations, procurement, OEM representatives, and third-party inspectors<br><br>Requirements<br><br>Requirements:<br><br>???? Diploma or Degree in Mechanical Engineering, Heavy Equipment Engineering, or a related field<br><br>???? 7-10 years of experience in maintenance and repair of heavy lifting equipment<br><br>???? 3-5 years of supervisory experience<br><br>???? Hands-on expertise with:<br><br>Mobile Cranes Forklifts Telehandlers Scissor Lifts & Manlifts Diesel Engine Overhaul<br><br>???? Strong knowledge of:<br><br>Hydraulic Systems Diesel Engines Transmission & Brake Systems Electrical/Electronic Control Systems Load Handling Equipment<br><br>???? Ability to read hydraulic and electrical schematics and interpret OEM manuals<br><br>Preferred Industry Experience:<br><br>Construction | Oil & Gas | Industrial Services | Equipment Rental

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Carry out preventive and corrective maintenance on mechanical equipment.</p><p>• Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><p>• Maintain RO plant equipment including:</p><p>o High-pressure pumps</p><p>o Booster pumps</p><p>o Pressure vessels</p><p>o RO skids and membranes</p><p>o Filters and strainers</p><p>o Chemical dosing systems</p><p>o Valves and actuators</p><p>o Heat exchangers</p><p>o Cranes and lifting equipment</p><p>• Perform equipment alignment, lubrication, and condition monitoring.</p><p>• Participate in commissioning, startup, and shutdown activities.</p><p>• Assist in root-cause analysis of equipment failures.</p><p>• Complete maintenance reports and update CMMS/work orders.</p><p>• Coordinate with operations, electrical, and instrumentation teams.</p><p>• Follow permit-to-work procedures and HSE requirements.</p><p>• Respond to emergency breakdowns and plant call-outs when required.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p><p>• 3–5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p><p>• Experience with RO desalination systems is preferred.</p><p>• Knowledge of rotating and static equipment maintenance.</p><p>• Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p><p>• Familiarity with maintenance management systems (CMMS).</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Shall be able to perform all the tasks of mechanical maintenance department. Following are the few listed jobs but not limited to</li> <li>Perform and assist preventive maintenance, corrective maintenance and overhauling of all the mechanical equipment of power plant.</li> <li>Should have knowledge of different types of valves, pumps, compressors, turbines, heat recovery steam generators, pipelines, pipe hangers, steam traps and all other mechanical equipment.</li> <li>Shall be able to perform inspection/maintenance of tanks, heat recovery steam generators, MSF evaporators, condensers, etc.</li> <li>Should have knowledge of special tools, hydraulic tools, pneumatic tools, power tools, lifting gears and hand tools.</li> <li>Should be proactive in nature.</li> </ul><br><ul> <li>Minimum 08 years of experience required in the large industry out of those 04 years shall be in power plant and or desalination plant.</li> <li>Able to Read, Write and Speak in English</li> <li>Shall have knowledge of various mechanical equipment, overhauling/maintenance.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

FM Engineer - Electromechanical<br>Language Requirements• Fluent in both English and Arabic (written and spoken) is necessary.<br>Education• Bachelor’s degree in Mechanical engineering, Electrical Engineering, or equivalent.• Master's Degree or Diploma is an advantage.<br>Experience•Minimum 5 years of overall experience in Facilities Management, Operations, or Maintenance.•At least 3 years of experience managing similar FM operations/projects within the GCC region.•Experience in educational facilities, commercial buildings, or similar environments is preferred.<br>Technical Competencies•Strong knowledge of mechanical and electrical systems, including:o Electrical Systemso Control Systemso ELV Systemso Building Management Systems (BMS)<br>• Familiarity with building maintenance standards and regulations applicable in Qatar.•Sound knowledge of Quality, Health, Safety, and Environmental (QHSE) management systems and regulations. Certifications•KAHRAMAA Grade B Classification (preferred).•QCDD Certified Engineer (preferred).•Any additional FM, HSE, or Maintenance-related certifications will be an advantage.

A leading Construction Project is hiring for Site Engineer – Mechanical (Infrastructure and Roadworks Experience) <br>Duration: Long Term<br>Requirements:Minimum 5 years of GCC experience (Mandatory) Applicants must be inside Qatar only Immediate joining Free Visa candidates only Interested and eligible candidates, please send your updated CV and supporting certificates

A leading Construction Project is hiring for Site Engineer – Mechanical (Infrastructure and Roadworks Experience) <br>Duration: Long Term<br>Requirements:Minimum 5 years of GCC experience (Mandatory) Applicants must be inside Qatar only Immediate joining Free Visa candidates only Interested and eligible candidates, please send your updated CV and supporting certificates

A leading Construction Project is hiring for Site Engineer – Mechanical (Infrastructure and Roadworks Experience) <br>Duration: Long Term<br>Requirements:Minimum 5 years of GCC experience (Mandatory) Applicants must be inside Qatar only Immediate joining Free Visa candidates only Interested and eligible candidates, please send your updated CV and supporting certificates

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Mechanical Inspector is responsible for inspecting and monitoring mechanical systems installation including HVAC, chilled water systems, and associated equipment. The role ensures compliance with project requirements, supports system integration, and contributes to achieving successful testing, commissioning, and handover.</p><br>Your role<ul><li>Inspect HVAC systems, chilled water piping, ductwork, pumps, valves, and ventilation systems.</li><li>Verify installation against approved drawings, specifications, and method statements.</li><li>Review WIRs, MIRs, and RFIs and ensure inspection readiness before approvals.</li><li>Monitor mechanical equipment installation and ensure alignment with project requirements.</li><li>Coordinate with OEM vendors and contractors for system interfaces and installation accuracy.</li><li>Support commissioning, IST (Integrated Systems Testing), and startup readiness.</li><li>Identify and report quality issues, NCRs, and non-compliance items.</li><li>Maintain inspection logs, documentation, and photographic records.</li><li>Assist in snagging, punch list closure, and final mechanical handover.</li><li>Ensure compliance with safety and quality standards and escalate issues as needed.</li></ul>About you<ul><li>Bachelor’s degree in Mechanical Engineering.</li><li>Experience in mechanical inspection for construction or industrial projects.</li><li>Preferably experienced in data centres, HVAC-intensive, or mission-critical environments.</li><li>Strong understanding of HVAC systems and mechanical installations.</li><li>Familiar with inspection processes, QA/QC documentation, and commissioning procedures.</li><li>UPDA certification preferred.</li><li>Good coordination and problem-solving skills.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

The Mechanical Technician is responsible for ensuring on-time delivery of equipment as per operational demands. The Mechanical Technician improves maintenance related nonproductive time ratio of the Product Line's assets within the Maintenance Base (MB), and improves maintenance efficiency and people productivity.<br><br>Maintain assigned equipment according to the pertinent maintenance program and compliant with the reliability centered maintenance strategy through adherence to the Computerized Maintenance Management System and standard work. Adhere to transactional discipline within Technology Lifecycle Management (TLM) business systems to record materials and supplies, labor costs and equipment maintenance performance history such as movements, work orders, parts used and time to maintain. Comply with TLM Product Line standards. Participate in the continuous improvement culture, initiatives and improvement plans within the MB to improve asset utilization and cost of service delivery (CoSD). Participate in continuous improvement efforts to improve asset turnaround time, which includes reducing downtime due to maintenance, parts and repair authorization numbers, failures and work-in-process. Support continuous improvement efforts to improve the efficiency and productivity of Maintenance Technicians. Implement CoSD projects, such as the planned repair and reuse of parts. Participate in failure investigations as assigned. Comply with the TLM Competency Management System.2-5 years of experience in the workshop Diploma in Mechanical Engineering or related discipline Strong communication, planning , and problem-solving skills Hands-on experience with pressure testing ( preferable)<br><br>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Site Inspector-Mechanical <p><strong>Job Title</strong></p><br> <p>Site Inspector- Mechanical</p><br> <p><strong>Part 4. Job Content</strong></p><br> <p><strong>Role Objective: </strong>To provide mechanical engineering support for the successful delivery of Design &amp; Build interior fit-out projects by reviewing mechanical designs, supervising HVAC and plumbing installations, coordinating multidisciplinary interfaces, monitoring construction quality, and ensuring all mechanical systems are designed, installed, tested and commissioned in accordance with project specifications, Company standards, requirements and applicable statutory regulations.</p><br> <p><strong>4.1 </strong><strong>Key Accountabilities</strong></p><br> <ul><li>Review mechanical design drawings, HVAC calculations, plumbing layouts, shop drawings, builders' work drawings, material submittals and method statements to ensure compliance with project specifications, standards, Company requirements and applicable codes.</li><li>Supervise and inspect the installation of all mechanical systems including HVAC, chilled water modifications, air distribution systems, VAV boxes, FCUs, ductwork, piping, insulation, ventilation systems, plumbing, drainage and associated mechanical equipment.</li><li>Coordinate mechanical works with architectural, structural, electrical, ELV and fire protection disciplines to ensure clash-free installation and compliance with approved designs.</li><li>Review equipment selections and verify compliance with approved schedules, energy efficiency requirements and manufacturer recommendations.</li><li>Monitor construction progress, identify technical issues, review inspection requests, issue observations and non-conformance reports (NCRs), and verify corrective actions.</li><li>Witness pressure testing, flushing, duct leakage testing, Testing Adjusting &amp; Balancing (TAB), pre-commissioning and commissioning activities.</li><li>Review commissioning procedures, TAB reports, functional performance testing reports and Operation &amp; Maintenance Manuals.</li><li>Participate in factory inspections, material inspections, mock-ups, site acceptance tests (SAT), integrated systems testing and final handover inspections.</li><li>Assist in reviewing contractor payment applications, variation proposals and claims related to mechanical works.</li><li>Ensure all mechanical works comply with Qatar Construction Specifications (QCS), Qatar Civil Defense (QCD), ASHRAE, SMACNA, NFPA and other applicable international standards.</li><li>Maintain accurate project documentation including RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.<ol><li><strong>General Responsibilities in Quality, Environmental &amp; Occupational Health &amp; Safety Management Systems </strong><ol><li>Aware of the QHSE Management System.</li><li>Understand the importance of conformance to the QHSE Policy and procedures and to the requirements of QHSE management system.</li><li>Aware of the Customer Requirements (where relevant).</li><li>Aware of the Significant Environmental Aspects and Occupational Hazards / risk in this area of operation.</li><li>Understand the potential consequences of deviations from approved procedures, specifications and safety requirements.</li><li>Aware of current Objectives and Targets in this area and what is the current status.</li><li>Aware of emergency Preparedness &amp; Response.</li><li>Aware of Security Requirements, sexual exploitation and abuse or gender based violence.</li></ol></li></ol></li></ul> <p><strong>Part 5. Working Conditions &amp; Hazards</strong></p><br> <p><strong>CHOOSE ONE:</strong></p><br> <ul><li> Normal office facilities (own office with desk, access to telephone)</li><li> Some exposure to heat, cold, dirt, noise and rainy weather conditions; some time away from duty station, exposure to</li><li> outdoor conditions</li><li> Some exposure to severe disagreeable conditions noise moisture, dust, excessive temperature, considerable dirt.</li><li> Very slight chance of accident or health hazard, usual office situation</li><li> Exposure to security threats and/or other injury could occur in the course of work. Minor accidents possible.</li><li> Job requires working with moving equipment that could inflict injuries; health hazards due to unsanitary conditions;</li><li> There is exposure to serious injuries through some hazardous circumstances involving handling of equipment; may cause </li><li> illness, incapacity and loss of time.</li><li> There is likelihood of frequent exposure to hazards or conditions may cause total disability or death. Requires constant use of</li></ul> <p> safety equipment.</p><br> <p><strong>Part 6. Job Requirement</strong></p><br> <p><strong>Educational Qualifications</strong></p><br> <ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Professional registration is preferred.</li><li>Commissioning or TAB certification is an advantage.</li></ul> <p><strong>Experience</strong></p><br> <ul><li>Minimum 10 years of professional experience in mechanical engineering, construction supervision or project management.</li><li>Minimum 5 years of experience in commercial office fit-out projects.</li><li>Proven experience in Design &amp; Build projects.</li><li>Strong experience in HVAC, plumbing, ventilation and testing &amp; commissioning.</li><li>Experience in Qatar and familiarity with Qatar Construction Specifications (QCS), Qatar Civil Defense requirements and local authority approval procedures.</li></ul> <p><strong>Behavioral Competencies</strong></p><br> <p><strong>Technical Competencies</strong></p><br> <p>Leadership</p><br> <p>Communication Skills</p><br> <p>Planning and Organizing</p><br> <p>Analytical Thinking</p><br> <p>Problem Solving</p><br> <p>Attention to Detail</p><br> <p>Teamwork</p><br> <p>Decision Making</p><br> <p>Time Management</p><br> <p>Stakeholder Management</p><br> <p>HVAC Design &amp; Installation</p><br> <p>Chilled Water Systems</p><br> <p>Air Distribution Systems</p><br> <p>Ventilation Systems</p><br> <p>Plumbing &amp; Drainage</p><br> <p>Fire Protection Coordination</p><br> <p>Testing, Adjusting &amp; Balancing (TAB)</p><br> <p>Testing &amp; Commissioning</p><br> <p>Shop Drawing Review</p><br> <p>Material Submittal Review</p><br> <p>Mechanical Calculations</p><br> <p>QA/QC Procedures</p><br> <p>ASHRAE Standards</p><br> <p>SMACNA Standards</p><br> <p>NFPA Standards</p><br> <p>Qatar Construction Specifications (QCS)</p><br> <p>AutoCAD</p><br> <p>Revit / BIM (preferred)</p><br> <p>Microsoft Office Suite</p><br> <br> <br> </div>

ISS International SpA is looking for an experienced Static Mechanical Engineer.<br>Position Summary The Static Mechanical Engineer is responsible for providing high-level technical expertise,design validation, asset integrity management, and engineering support for all static (stationary)equipment and piping systems within the manufacturing facility. This role focuses on maximizingplant reliability, leading execution strategies during major turnarounds, ensuring structuralcompliance with international design codes, and mitigating risk across high-pressure, corrosiveprocess loops. Key Responsibilities1. Engineering Design & Modification Review and approve design calculations, data sheets, drawings, and technicalspecifications for modifications or new procurement of pressure vessels, heat exchangers,and tanks. Generate and review Piping & Instrumentation Diagrams (P&IDs), Piping Material Specifications (PMS), and Material Take-Offs (MTOs) to meet international standards (e.g.,ASME, ANSI, API). Develop and review plot plans, equipment layouts and 3D models. Route critical process, utility, and offsite pipelines. Stress Analysis: Perform piping flexibility and stress analysis to ensure systems canwithstand high pressures, extreme temperatures, and vibrations. Execute plant modifications via the formal Management of Change (MOC) protocol,ensuring no compromise to process safety or plant design basis. Prepare and approve technical deliverables for replacement projects, including scope ofwork, technical bid evaluations (TBE), and vendor drawing reviews.2. Turnaround & Maintenance Support Define the technical scope for critical static equipment during scheduled plant shutdowns,turnarounds, and outages. Develop inspection and repair procedures for specialized high-pressure equipment,including shell-and-tube heat exchangers, reformer tubes, and atmospheric storage tanks. Supervise critical repair activities on-site, ensuring field welding, post-weld heat treatment(PWHT), and non-destructive testing (NDT) comply with structural codes. Collaborate with QA/QC and Inspection teams to review inspection findings, wall-thicknessreports, and eddy-current testing results to determine asset health.3. Asset Integrity & Plant Reliability Support Support Fitness-for-Service (FFS) evaluations and remaining-life assessments for older ordegraded stationary equipment. Support root cause analysis (RCA) on mechanical static equipment failures, structuralleaks, and chronic piping vibrating issues to implement definitive corrective actions.4. Safety, Compliance & Mentorship Enforce strict compliance with international codes, environmental criteria, and corporate Health, Safety, and Environment (HSE) standards. Participate as a core technical member in process safety workshops, including Hazard and Operability Studies (HAZOP), HAZID, and Risk-Based Inspections (RBI). Coach, mentor, and transfer knowledge to junior and mid-level mechanical engineerswithin the department to foster professional technical growth. Job Requirements & Qualifications Education & Certifications Bachelor’s degree in mechanical engineering from a recognized, accredited university. Experience & Language Minimum 5 years of post-graduate experience in mechanical engineering within a heavycontinuous-process chemical plant, petrochemical facility, or refinery environment. Experience in the fertilizer industry (specifically Ammonia, Urea, or Nitrates manufacturingunits) is strongly preferred. Proven track record of managing massive capital equipment replacement projects andparticipating in large-scale plant turnarounds. Language: Must possess excellent fluent English communication skills (both written andverbal) to draft technical engineering reports, lead meetings, and coordinate withinternational vendors. Technical Software & Industrial Codes Software Competency: Advanced proficiency in PV Elite (pressure vessel design), CAESARII (piping stress analysis) and Nozzle PRO. Codes & Standards: Comprehensive working command of ASME Section VIII Div 1 &2 (Pressure Vessels), ASME B31.3 (Process Piping), API 650/620 (Storage Tanks),and TEMA Standards (Heat Exchangers)