Heavy equipment mechanical engineer Jobs

Job Summary<br><br>The Inspector - QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements. This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization's commitment to delivering high-quality products and services<br><br>Roles & Responsibilities<br><br>Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements. Verify material test certificates (MTCs) and maintain traceability Support pressure tests, NDT activities, and dimensional inspections. Ensure all measuring and testing equipment are properly calibrated and used as per defined standards Prepare inspection reports, checklists, and non-conformance reports (NCRs). Maintain accurate and detailed QA/QC records for traceability and audit purposes Identify and report deviations or non-conformances to the QA/QC Engineer. Assist in root cause analysis and follow-up of corrective and preventive actions Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company's HSE standards<br><br>QHSE Responsibilities<br><br>Comply with all QHSE standards, policies, and procedures relevant to your work Actively participate in QHSE meetings and complete all required safety inductions and trainings Identify and report unsafe conditions; take corrective action where possible within your scope Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly Support a safe work environment by cooperating with safety practices and encouraging others to do the same Refer to the OHSMS Manual, Section 4.4.1, for further clarification on individual QHSE responsibilities and accountability<br><br>Education & Certificates<br><br>Diploma or Bachelor's Degree in Mechanical or Electrical Engineering NDT Level II (UT/RT/PT/MT) preferred<br><br>Experience<br><br>Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNGFamiliar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079. etc.) Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects

Job Summary<br><br>The Inspector - QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements. This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization's commitment to delivering high-quality products and services<br><br>Roles & Responsibilities<br><br>Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements. Verify material test certificates (MTCs) and maintain traceability Support pressure tests, NDT activities, and dimensional inspections. Ensure all measuring and testing equipment are properly calibrated and used as per defined standards Prepare inspection reports, checklists, and non-conformance reports (NCRs). Maintain accurate and detailed QA/QC records for traceability and audit purposes Identify and report deviations or non-conformances to the QA/QC Engineer. Assist in root cause analysis and follow-up of corrective and preventive actions Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company's HSE standards<br><br>QHSE Responsibilities<br><br>Comply with all QHSE standards, policies, and procedures relevant to your work Actively participate in QHSE meetings and complete all required safety inductions and trainings Identify and report unsafe conditions; take corrective action where possible within your scope Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly Support a safe work environment by cooperating with safety practices and encouraging others to do the same Refer to the OHSMS Manual, Section 4.4.1, for further clarification on individual QHSE responsibilities and accountability<br><br>Education & Certificates<br><br>Diploma or Bachelor's Degree in Mechanical or Electrical Engineering NDT Level II (UT/RT/PT/MT) preferred<br><br>Experience<br><br>Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNGFamiliar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079. etc.) Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects

<p>• Perform preventive and corrective maintenance on HVAC and lighting equipment • Troubleshoot and diagnose electrical and mechanical faults • Plan and schedule maintenance activities using SAP systems • Conduct daily toolbox meetings and ensure HSE compliance • Act as Designated Site Representative (DSR) for contractors • Implement maintenance checklists and standard procedures • Manage equipment spare parts and inventory • Support emergency shutdowns and planned maintenance • Prepare maintenance reports and documentation • Participate in audits and reliability improvement initiatives</p><p>• 2-year Diploma in Electrical Engineering, HVAC, or Refrigeration • 3-5 years HVAC maintenance experience • Petrochemical/oil & gas industry experience preferred • SAP or CMMS knowledge • BOSIET, H2S, Fire Watch certifications</p>

Overview<br><br>A technical service and application engineer role providing on-site support to customers and partnering with sales staff to deliver solution-driven water treatment services in downstream (petrochemical) facilities.<br><br>Key Responsibilities<br><br>Petrochemical experience is mentioned in the requirements<br><br>Collaborate with District Sales Representatives to launch and support new chemical treatment applications.<br><br>Perform routine and technical service tasks: system audits, sample testing, data logging, reporting, and inventory management.<br><br>Install, calibrate, and maintain feed and monitoring equipment.<br><br>Troubleshoot operational issues, recommend corrective actions, and escalate complex challenges.<br><br>Build strong working relationships with customer personnel and support best practices implementation.<br><br>Capture service reports, assist with chemical ordering, and support technical proposals.<br><br>Qualifications<br><br>Bachelor’s degree in chemical engineering.<br><br>1–3 years’ experience in water treatment.<br><br>Valid driver’s license and acceptable driving record.<br><br>Familiarity with chemical feed systems, monitoring equipment, and basic process instrumentation.<br><br>Knowledge in Microsoft Office, and strong communication and relationship skills.<br><br>Our Commitment to a Culture of Inclusion & Belonging<br><br>Ecolab is committed to fair and equal treatment of associates and applicants and furthering the principles of Equal Opportunity to Employment. We will recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance in all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement. Ecolab will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin,citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, or disability.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Remarkable people, trusted by clients to design and advance the world</strong></p><br><p>Wood are actively seeking applications for<strong> Principal Rotating Engineer</strong> role to support future growth in our expanding business in Qatar.&nbsp;</p><br><p>The projects team focusing on delivering across FEED, Pre-FEED, Brownfield, Greenfield scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets.&nbsp;</p><br><p>This is a long-term assignment based in Qatar.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>In this role, you will be responsible for the execution of project work, in accordance with the project execution plan including Wood and/or Project Procedures on Safety and Quality Control, within the man-hour, cost budgets and the project schedule targets.</p><br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in:</p><br><p>Onshore Oil and Gas&nbsp;<br> Offshore Oil and Gas</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li><strong>Life Insurance</strong>; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death&nbsp;</li> <li><strong>End of Service Gratuity</strong>; In line with Qatar Labor Law, upon completion of 1 years’ service employees are eligible for an End of Service benefit of three weeks for every year of service.</li> <li><strong>Medical Insurance</strong>: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000.</li> <li><strong>Employee Assistance Programme: </strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li> <li><strong>Professional Memberships;&nbsp;</strong>One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li></ul><p>Responsibilities</p><br><p>The Principal Rotating Engineer will be responsible for the following activities:&nbsp;</p><br><ul> <li>Overall Lead role for the project including liaison with client technical personnel.</li> <li>Technical management of multi-location team in London, India and Qatar</li> <li>Providing advice on the selection of rotating equipment</li> <li>Specification of pumps, compressors and other rotating equipment, including drivers, seal and lube systems by preparing Technical Specifications and Mechanical Datasheet. &nbsp;</li> <li>Preparation Enquiry Requisitions&nbsp;for budget pricing and for long lead items</li> <li>Technical evaluation / clarification of supplier bids as required</li> <li>Technical supervision of supplier design and control of supplier interface, plus the co-ordination of interfaces with other engineering disciplines</li> <li>Review of Supplier documentation for integration within Project design, such as GA / Details / Calculations and Fabrication Procedures</li> <li>Provide specialist input to design reviews, risk assessments and constructability reviews</li> <li>Support Inspection and Testing of Equipment, attend testing for critical equipment</li> <li>Support Construction and Commissioning phase&nbsp;</li> <li>Technical support for installation and commissioning</li> <li>Supervise less experienced mechanical engineers and, where required</li> <li>To provide relevant knowledgeable practical skills in the response and actions for: <ul> <li>Site visits and site surveys</li> <li>Site queries and discussions</li> <li>Supplier, vendor, contractor, client and site related discussions</li> <li>Site based activities</li> </ul></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><ul> <li>Degree qualification in Mechanical Engineering, and preferably a chartered member of a relevant professional body or institution.</li> <li>Minimum 15 years’ experience in Oil &amp; Gas post-graduation</li> <li>Experience in working with process and utility compressors, gas and steam turbines, pumps and other rotating equipment</li> <li>Experience of working in a variety of projects and phases, including greenfield and brownfield, on and offshore, Concept through to EPC, with a focus on upstream.</li> <li>Familiarity with the following codes: API, ISO and ASME&nbsp;</li> <li>Familiarity with standards of major oil companies&nbsp;particularly Shell DEPs</li> <li>Flexible attitude, with good written and verbal communication skills</li> <li>Computer literate within Microsoft Office</li> <li>Demonstrate a good level of written and spoken communication skills in the English language.</li> <li>Should also be able to work independently.</li> <li>Be willing and able to represent Wood in both onshore and offshore surveys, holding relevant certification or willing to undertake suitable training such as BOSIET and H2S Awareness.</li></ul> </div>

About the job :<br><br>Intertek is a global leader in Testing, Inspection and Certification, trusted worldwide to ensure quality, safety and compliance.<br><br>Through our new Relocation Program, we are seeking experienced Aramco Inspectors with strong expertise in vendor inspections across mechanical and electrical disciplines.<br><br>This program is designed to offer a long-term career path in our office in France, supported by relocation assistance (visa and work permit sponsorship in single status), and the opportunity to contribute to high-profile projects under Aramco standards.<br><br>Candidate must be willing to relocate to our office in Lyon, France. <br><br>Role Overview :<br><br>We are looking for Aramco-Approved Vendor Inspectors who will perform vendor inspections of equipment, components and fabrication processes at supplier facilities.<br><br>The role ensures that all activities comply with Aramco specifications, international codes, and client requirements.<br><br>This is a unique opportunity for inspectors committed to quality and safety who want to build a lasting career in Europe with Intertek.<br><br>Requirements<br><br>Minimum Requirements :<br><br>Bachelor's/Diploma degree in Mechanical / Metallurgical / Welding / Materials / Electricals / Instrumentation engineering discipline (or equivalent)<br><br>Minimum 5-10+ years in vendor inspections in oil & gas / petrochemical / power / heavy fabrication environment; prior exposure to Saudi Aramco projects is strongly preferred<br><br>Must hold an Aramco "approved vendor inspector / VID" status with valid QM codes<br><br>Having Aramco Approvals QM26 (mandatory), QM30 (mandatory), QM27, QM31. <br><br>Certifications :<br><br>Pass Aramco CBT (Competency Based Test) - NDT certification (Level II / III) in relevant methods (PT, MT, UT, RT) - Welding Inspector Certification (e.g. CSWIP / AWS / equivalent) - API/ASME / code qualifications depending on department (e.g. API 650, API 620, ASME Section V / IX)<br><br>Technical Knowledge :<br><br>Strong knowledge of welding, metallurgy, heat treatment, materials testing, codes & standards (ASME, API, AWS, ASTM), inspection methods, non-destructive testing techniques, fabrication processes, etc.<br><br>Benefits<br><br>What We Offer :<br><br>Permanent employment contract with Intertek France. Full visa and work permit sponsorship (in single status) Relocation assistance Career growth opportunities within a global leader in TICThe chance to work on major vendor inspection projects under Aramco standards in Europe

About the job :<br><br>Intertek is a global leader in Testing, Inspection and Certification, trusted worldwide to ensure quality, safety and compliance.<br><br>Through our new Relocation Program, we are seeking experienced Aramco Inspectors with strong expertise in vendor inspections across mechanical and electrical disciplines.<br><br>This program is designed to offer a long-term career path in our office in France, supported by relocation assistance (visa and work permit sponsorship in single status), and the opportunity to contribute to high-profile projects under Aramco standards.<br><br>Candidate must be willing to relocate to our office in Lyon, France. <br><br>Role Overview :<br><br>We are looking for Aramco-Approved Vendor Inspectors who will perform vendor inspections of equipment, components and fabrication processes at supplier facilities.<br><br>The role ensures that all activities comply with Aramco specifications, international codes, and client requirements.<br><br>This is a unique opportunity for inspectors committed to quality and safety who want to build a lasting career in Europe with Intertek.<br><br>Requirements<br><br>Minimum Requirements :<br><br>Bachelor's/Diploma degree in Mechanical / Metallurgical / Welding / Materials / Electricals / Instrumentation engineering discipline (or equivalent)<br><br>Minimum 5-10+ years in vendor inspections in oil & gas / petrochemical / power / heavy fabrication environment; prior exposure to Saudi Aramco projects is strongly preferred<br><br>Must hold an Aramco "approved vendor inspector / VID" status with valid QM codes<br><br>Having Aramco Approvals QM26 (mandatory), QM30 (mandatory), QM27, QM31. <br><br>Certifications :<br><br>Pass Aramco CBT (Competency Based Test) - NDT certification (Level II / III) in relevant methods (PT, MT, UT, RT) - Welding Inspector Certification (e.g. CSWIP / AWS / equivalent) - API/ASME / code qualifications depending on department (e.g. API 650, API 620, ASME Section V / IX)<br><br>Technical Knowledge :<br><br>Strong knowledge of welding, metallurgy, heat treatment, materials testing, codes & standards (ASME, API, AWS, ASTM), inspection methods, non-destructive testing techniques, fabrication processes, etc.<br><br>Benefits<br><br>What We Offer :<br><br>Permanent employment contract with Intertek France. Full visa and work permit sponsorship (in single status) Relocation assistance Career growth opportunities within a global leader in TICThe chance to work on major vendor inspection projects under Aramco standards in Europe

<p>Supervise Fiber Optic cable installation and splicing works.</p><p>Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels.</p><p>Supervise installation of Control junction boxes and Panels.</p><p>Good knowledge in reading and understanding Equipment Layout drawings.</p><p>Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc.</p><p>Cable termination and Loop checking.</p><p>Co-ordinate pre-commissioning activities and assist during commissioning of facilities.</p><p>Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates.</p><p>Witness SAT pre commissioning activities for equipment.</p><p>Maintain a daily record of progress (daily diary) noting special comments.</p><p>Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.</p><p>Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits.</p><p>Participate in development of as-built drawings/documentation.</p><p>Prepare Punch list for finished work prior to hand over to Company by contractor by paying special attention to all ELV equipment including Quality checks.</p><p>Works closely with other Company Construction Supervisors (Mech / Elect).</p><p>Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement.</p><p>Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site.</p><p>Liaise and report with the QC Inspector on quality related matters.</p><p>Liaise with the HSE Supervisor on safety related matters.</p><p>Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs).</p><p>Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer.</p><p>Review contractors' construction plans and schedules including method statements and JSAs.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</p><p>Good skills in construction management, effective communication, conflict resolution.</p><p>Relevant courses in HSE, QAQC and construction.</p><p>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</p><p>Extensive experience in large scale solar (Photovoltaic) Projects.</p><p>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition), and other relevant instrumentation equipment used in oil and gas industries.</p><p>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</p><p>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</p>

Senior HVAC Technician – Oil & Gas Position: Senior HVAC Technician Employment: Full-Time Joining: Immediate Joiners Preferred Job Summary We are seeking an experienced Senior HVAC Technician with a strong background in HVAC maintenance, including mandatory experience within the Oil & Gas industry. The role will be responsible for maintaining, troubleshooting, repairing, and ensuring the reliable operation of HVAC systems and equipment. Key Responsibilities Perform preventive, corrective, breakdown, and shutdown maintenance of HVAC systems and equipment. Diagnose HVAC faults and carry out troubleshooting and repairs efficiently. Maintain and service equipment such as chillers, AHUs, FCUs, package units, split AC systems, ventilation/exhaust systems, pumps, compressors, and associated controls. Conduct routine inspections and identify potential equipment failures before breakdown. Support planned shutdown and maintenance activities in accordance with site schedules. Ensure HVAC equipment operates safely, efficiently, and within required parameters.<br>Candidate Requirements Minimum 5 years of hands-on HVAC maintenance experience. Minimum 2 years of HVAC maintenance experience in the Oil & Gas industry – mandatory. Strong technical knowledge of HVAC systems, equipment, maintenance, and troubleshooting. Proven experience in corrective, preventive, breakdown, and shutdown maintenance. Ability to diagnose mechanical and electrical HVAC faults.

<p><strong>Company Description</strong></p><p>Al Fereej Consultancy &amp; Design is a multi-disciplinary Grade-A consultancy practice based in Doha-Qatar since 1998. Our designs draw on a broad perception of inspired ideas and innovative problem-solving cultivated through the multi-cultural setting within our atelier. We offer a full range of architectural engineering services from planning, design, development, and contract documentation to construction management and supervision. Our practice spans the Middle East through our international alliances. We strive to deliver high-quality services that meet both timetables and budgets.</p><p><br></p><p><strong>Role Description</strong></p><p>This is a full-time on-site role for a Mechanical Supervision Engineer located in Doha, Qatar. The Mechanical Supervision Engineer will be responsible for overseeing the installation, maintenance, and inspection of mechanical systems. Day-to-day tasks include conducting site inspections, ensuring compliance with safety standards, reviewing design plans, and coordinating with the construction team and subcontractors.</p><p><br></p><p><strong>Qualifications</strong></p><ul><li>Experience in Mechanical Engineering and Maintenance</li><li>Proficiency in Computer-Aided Design (CAD) software</li><li>Ability to conduct detailed construction site Inspections and ensure compliance with standards</li><li>Knowledge of Automotive systems and their maintenance</li><li>Excellent problem-solving and analytical skills</li><li>Strong communication and coordination abilities</li><li>Bachelor's degree in Mechanical Engineering or related field</li><li>Minimum of 5 years of Experience in the construction or Engineering Consultancy industry is a plus</li><li>UPDA certifications mandatory</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>&nbsp;Refrigeration Engineer | Qatar</b></p><p>We are hiring an experienced Refrigeration Engineer for a leading company in Qatar.</p><p>Position Refrigeration Engineer</p><p>Qualification * Bachelor's Degree in Mechanical Engineering with specialization in Refrigeration.</p><p>Experience * Minimum 12 years of GCC experience * Experience in Snow Parks or with OEM companies manufacturing refrigeration systems is mandatory.</p><p>Technical Expertise * Strong knowledge of industry standards and engineering practices. * Ability to interpret schematic diagrams, blueprints, and technical drawings. * Hands-on experience with: * Ammonia Screw Compressors * Evaporative Condensers * Glycol Centrifugal Pumps * Compressed Air Systems * Snow Making Systems * Proficient in SCADA systems. * Fluent in English (Mandatory). * Arabic language skills will be an added advantage.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical Engineering with specialization in Refrigeration.</li><li>Minimum 12 years of GCC experience</li><li>Experience in Snow Parks or with OEM companies manufacturing refrigeration systems is mandatory.</li><li>Strong knowledge of industry standards and engineering practices.</li><li>Ability to interpret schematic diagrams, blueprints, and technical drawings.</li><li>Hands-on experience with: Ammonia Screw Compressors, Evaporative Condensers, Glycol Centrifugal Pumps, Compressed Air Systems, Snow Making Systems</li><li>Proficient in SCADA systems.</li><li>Fluent in English (Mandatory).</li><li>Arabic language skills will be an added advantage.</li></ul><p></p></section>

<p>JOB TITLE: Project Manager Role Purpose: Under the direction of the Facility and Support Services (F&amp;SS) Director provide oversight to all hospital facility projects. This includes planning, organizing manpower for project activities, implementation, project control, and evaluation. Lead projects as needed for Hospital Operations and collaborate with other departments as instructed by the F&amp;SS Director. Responsible for managing the processes and procedures that form the facility project program for the hospital. Responsible for the Hospital engineering equipment management and inventory.</p><p>Job Responsibilities: - (Including but not limited to): Plan and deliver project activities related to engineering scope of work. Manage projects by determining project specifications, design, end user requirements, and performance standards. Monitor on-going activities, review the project schedule, and revise the schedule as required. Organize and arrange all manpower with appropriate skills necessary to carry out all project activities. Manage project contractors according to the established policies and practices of the Hospital and the parent company policies. Manages and assigns tasks to engineering staff and contractors. Supervise and approve contractor s completed jobs and other subcontractor s jobs. Communicate technical information to non-technical stakeholders. Collaborate with other team leaders and departments. Execute the project according to the project plan. Monitor the progress of the project and adjust as necessary to ensure the successful completion of the project. Establish a communication schedule to update stakeholders including appropriate staff within the hospital on the progress of the project, prepare progress reports for senior management. Review the quality of the work completed with the project team on a regular basis to ensure that it meets the project standards. Strive to improve efficiency and sustainability of processes and product designs, and to reduce waste. Write progress reports on the project for senior management. Monitor all budgeted project expenditures. Helps to create and oversee project budgets and engages in cost management strategies. Maintains safe and clean working environment by enforcing procedures, rules, and regulations. Ensure that the project deliverables are on time, within budget and at the required level of quality. Evaluate the outcomes of the project as established during the planning phase. Assures that processes meet quality and safety compliance guidelines. Manage the operation of the Hospital Engineering including buildings, equipment, firefighting equipment, and other services as required. Responsible of hospital plants, chillers, HVAC systems, civil works, mechanical jobs, electrical jobs, plumbing, carpentry, etc. Management, Monitoring and Maintenance of all Hospital Engineering Equipment. Scheduling equipment periodic preventative maintenance (PPM) and corrective maintenance on hospital engineering equipment. Manage equipment Service Contracts, warranty compliance and department SLA s. Develop, review and amend policies and procedures for the Hospital engineering section. Prepare technical specifications, tender review, and evaluation for the purchase of new engineering equipment and projects. Commissioning and installation of newly purchased hospital engineering equipment. Develop annual budgets: operating, capital, and manpower for the section. Liaise with finance to finalize annual budgets. Produces weekly, monthly, and annual reports for F&amp;SS Director. Assume or accept any other responsibilities as assigned by the direct supervisor within the position role and responsibility.</p><p><strong>Desired Candidate Profile</strong></p><p>Job Specific Skills: - Bachelor s Engineering degree in Mechanical, Civil, Electrical &amp; or any other related field. Master s degree is preferable. Certification in Facility Management or Project Management is ideal. Minimum experience of 6 to 8 years, in which 2-3 years should be in a similar position /responsibility, preferably in a similar industry. Demonstrated managerial, supervisory, budgetary and estimation skills for project activities and implementation. Knowledge of equipment procurement processes including specification writing and tender analysis. Knowledge and experience in the management of a Hospital Regulation and Equipment service to an international standard. Proficiency using presentation software to explain complex information to non-technical management personnel and other stakeholders. Experience using computer-aided design (CAD) platforms. Professionally groomed to project a positive image. Desire to embrace a culture of excellence, collaboration, and communication. High proficiency in English language is mandatory. Arabic will be a definitive advantage.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Position Name:<b> Facility Maintenance Engineer</b></p><p>Department: <b>Technical</b></p><p>Location: <b>Doha, Qatar</b></p><p><b>Job Objective:</b></p><p>To conduct efficient and effective general Facility maintenance activities of the company’s facilities including petrol stations, operation plants (mainly Fire Alarm/ protection, HVAC, General civil, MEP, Elevators, Smoke Ventilation system, Pressurization system, EAS, Sliding doors and Road Barriers) by coordinating the efforts of facilities maintenance team, to ensure that all maintenance activities, troubleshooting on failures/ abnormal operation all facility maintenance equipment and provide resolution for any maintenance related actions, monitoring the performance of relevant maintenance contractors, providing technical support and training to subordinates and maintain appropriate records as per standards and requirements and are carried out promptly, safely and cost effectively.</p><p><b>Key Accountabilities:</b></p><p>·&nbsp;&nbsp;&nbsp;Maintenance</p><p>·&nbsp;&nbsp;&nbsp;Complaint Resolution</p><p>·&nbsp;&nbsp;&nbsp;Contractor Selection and Evaluation</p><p>·&nbsp;&nbsp;&nbsp;Contract Management</p><p>·&nbsp;&nbsp;&nbsp;Budget and Plans</p><p>·&nbsp;&nbsp;&nbsp;People Management</p><p>·&nbsp;&nbsp;&nbsp;Strategy Contribution and Implementation</p><p>·&nbsp;&nbsp;&nbsp;Service Level Agreements</p><p>·&nbsp;&nbsp;&nbsp;Management Reports</p><p>·&nbsp;&nbsp;&nbsp;Continuous Improvement</p><p>·&nbsp;&nbsp;&nbsp;Policies, Systems, Processes and Procedures</p><p><b>Minimum Qualifications:</b></p><p>·&nbsp;&nbsp;&nbsp;Bachelor's degree in engineering (Civil, Mechanical, Electrical or relevant)</p><p><b>Minimum Experience:</b></p><p>·&nbsp;&nbsp;&nbsp;3-5 years of post-qualification relevant experience with at least 2 years in an Oil &amp; Gas industry</p><p>Note: - <b>Candidates with hands-on experience and strong technical knowledge of CCTV and Access Control Systems will be given preference for this position.</b></p><p><b>Job Specific Skills:</b></p><p>·&nbsp;&nbsp;&nbsp;Problem solving skills</p><p>·&nbsp;&nbsp;&nbsp;Strong written &amp; verbal communication skills</p><p>·&nbsp;&nbsp;&nbsp;Superior organizing skills</p><p>·&nbsp;&nbsp;&nbsp;Ability to plan ahead</p><p>·&nbsp;&nbsp;&nbsp;Knowledge of plant ergonomics &amp; safety standards</p><p>·&nbsp;&nbsp;&nbsp;Report writing</p><p>·&nbsp;&nbsp;&nbsp;Presentation skills</p><p>·&nbsp;&nbsp;&nbsp;Negotiation Skills</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Candidates with hands-on experience and strong technical knowledge of CCTV and Access Control Systems. </b></p><p><b>Bachelor's degree in engineering (Civil, Mechanical, Electrical or relevant)</b></p><p><b>3-5 years of post-qualification relevant experience with at least 2 years in an Oil &amp; Gas industry</b></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of Senior CNC Machine Operator in Qatar. Our client is a reputed organization in the Shipbuilding / Heavy Fabrication sector seeking skilled, motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Operate CNC machinery used for shipbuilding, offshore structures, and heavy fabrication activities.<br></li><li>Set up CNC machines according to approved job requirements, drawings, and production specifications.<br></li><li>Interpret engineering drawings, dimensions, cutting requirements, and fabrication instructions accurately.<br></li><li>Monitor CNC machine operations and make appropriate adjustments to maintain dimensional accuracy and production quality.<br></li><li>Inspect fabricated components and identify deviations from required specifications.<br></li><li>Perform routine machine checks and support preventive maintenance activities to minimize downtime.<br></li><li>Follow shipyard and heavy-fabrication safety procedures during machine operation and material handling.<br></li><li>Maintain production records and coordinate with fabrication and production teams to complete assigned work efficiently.<br></li></ul>Required Skills<br><ol><li><b>CNC Machine Operation:</b> Hands-on ability to set up, operate, and monitor CNC machinery safely.<br></li><li><b>Shipyard/Heavy Fabrication Experience:</b> Practical understanding of production requirements in shipyards or heavy fabrication environments.<br></li><li><b>Engineering Drawing Interpretation:</b> Ability to understand dimensions, tolerances, profiles, and fabrication drawings.<br></li><li><b>Machine Setup &amp; Inspection:</b> Ability to verify tooling, parameters, workpiece positioning, and finished dimensions.<br></li><li><b>Safety &amp; Quality Compliance:</b> Knowledge of safe CNC operating practices and fabrication quality requirements.<br></li></ol>Preferred Skills<br><ul><li>Offshore structure fabrication exposure.<br></li><li>CNC troubleshooting and basic machine maintenance knowledge.<br></li><li>Experience working on large fabricated components used in marine or offshore projects.<br></li></ul>Work Experience Requirements<br><p>Candidates should have <b>at least 3 years of experience as a CNC Machine Operator in shipyards or heavy fabrication industries</b>. Candidates holding Secondary Education should have <b>4+ years of CNC machine experience in shipbuilding/offshore structure fabrication</b>. Experience in industrial fabrication environments involving large structural components is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> ITI or Trade Apprenticeship<br></li><li><b>Alternative:</b> Higher Secondary Education or Secondary Education with the required relevant experience<br></li><li><b>Preferred:</b><br></li><li><b>Additional:</b><br></li><li><b>Contact No-9786888866​</b><br></li></ul><br> </div>

<p>WE ARE HIRING: PROJECT DIRECTOR – MAJOR WASTEWATER EPC PROGRAMME</p><p>Mobilization: Immediate / earliest availability</p><p>CME Wakra Water W.L.L. is seeking an accomplished Project Director to assume executive responsibility for the integrated delivery of the Al Wakra and Al Wukair Sewage Treatment Plant and OCF-2 Works.</p><p>This is a critical leadership appointment for a complex, multidisciplinary EPC programme involving engineering, procurement, construction, testing, commissioning and handover across two project sites.</p><p>The successful candidate will lead project delivery across:</p><ul><li><p>HSE, environmental compliance and workforce welfare</p></li><li><p>Engineering, design integration and technical assurance</p></li><li><p>Procurement and expediting of critical long-lead equipment</p></li><li><p>Civil, mechanical, electrical, instrumentation and control works</p></li><li><p>Primavera P6 programme management and schedule recovery</p></li><li><p>Testing, commissioning, performance testing and handover</p></li><li><p>Cost control, cash flow and forecast-at-completion</p></li><li><p>Contract administration, variations, EOT and claims management</p></li><li><p>Subcontractor, vendor and supply-chain performance</p></li><li><p>Employer, Engineer and Qatar authority interfaces</p></li><li><p>Recruitment, mobilisation and leadership of a multicultural project team</p></li></ul><p>MANDATORY REQUIREMENTS</p><p>Candidates should demonstrate:</p><ul><li><p>Bachelor’s degree in Civil, Mechanical, Chemical/Process, Electrical or Environmental Engineering</p></li><li><p>Minimum 20 years of progressive engineering and construction experience</p></li><li><p>At least 12 years in major contractor-side EPC delivery</p></li><li><p>At least five years as Project Director, Project Executive or equivalent single-point project leader</p></li><li><p>Successful delivery of at least one major wastewater, water infrastructure or comparable process-plant EPC project through commissioning and handover</p></li><li><p>Leadership experience on a complex EPC project or programme valued at USD 300 million or more</p></li><li><p>Minimum five years of GCC experience, preferably including at least two years in Qatar</p></li><li><p>Strong knowledge of FIDIC-style EPC contracts, variations, EOT, claims, payment certification and dispute avoidance</p></li><li><p>Executive-level understanding of Primavera P6, critical-path analysis, schedule recovery, resource planning, cost forecasting and risk management</p></li><li><p>Fluent written and spoken English; Arabic would be a strong advantage</p></li><li><p>Ability to work full-time in Qatar and maintain a visible presence at both project sites</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Chartered Engineer, CEng, P.Eng., PE or equivalent professional registration</p></li><li><p>Current Qatar Ministry of Municipality engineering registration</p></li><li><p>NEBOSH, IOSH or equivalent HSE leadership qualification</p></li><li><p>Formal training in FIDIC contracts, claims, negotiation or dispute avoidance</p></li></ul><p>We are looking for a decisive, commercially aware and technically credible leader who can build a high-performing team, protect the critical path, manage complex stakeholder interfaces and deliver safely without compromising quality, operability or contractual entitlement.</p>

Additional Information<br><br>Job Number 26109938<br><br>Job Category Engineering & Facilities<br><br>Location Building No. 3, Street No. 353, Lusail, Qatar, Qatar, 4010VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>傲途格精选酒店品牌拥有一系列豪华品质独立合作酒店，为宾客缔造难忘非凡的旅居体验。每间酒店皆是融汇优良品质、匠心设计和前卫个性的精选之作，为当今旅客打造一系列兼具时尚风格和探险精神的特色体验。傲途格精选酒店品牌是个性主义者的特别之选，个性主义者亦是傲途格精选酒店的目标客户，他们将每一次旅行看作是打造个性故事的机会，因此，无论是休闲度假亦或商务旅行，他们都会毫不犹豫地选择傲途格精选，因为在他们看来，酒店的意义远不止提供一处休憩之所。加入傲途格精选酒店，便是加入万豪国际集团的非凡品牌组合。从这里扬帆起航 ，发挥个人价值，追求 人生目标，融入 卓越国际团队，展现 真我风采。

Additional Information<br><br>Job Number 26109938<br><br>Job Category Engineering & Facilities<br><br>Location Building No. 3, Street No. 353, Lusail, Qatar, Qatar, 4010VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>傲途格精选酒店品牌拥有一系列豪华品质独立合作酒店，为宾客缔造难忘非凡的旅居体验。每间酒店皆是融汇优良品质、匠心设计和前卫个性的精选之作，为当今旅客打造一系列兼具时尚风格和探险精神的特色体验。傲途格精选酒店品牌是个性主义者的特别之选，个性主义者亦是傲途格精选酒店的目标客户，他们将每一次旅行看作是打造个性故事的机会，因此，无论是休闲度假亦或商务旅行，他们都会毫不犹豫地选择傲途格精选，因为在他们看来，酒店的意义远不止提供一处休憩之所。加入傲途格精选酒店，便是加入万豪国际集团的非凡品牌组合。从这里扬帆起航 ，发挥个人价值，追求 人生目标，融入 卓越国际团队，展现 真我风采。

Additional Information<br><br>Job Number 26109938<br><br>Job Category Engineering & Facilities<br><br>Location Building No. 3, Street No. 353, Lusail, Qatar, Qatar, 4010VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>傲途格精選酒店品牌擁有一系列豪華品質獨立合作飯店，為賓客締造難忘非凡的旅居體驗。每間飯店皆是融匯優良品質、匠心設計和前衛個性的精選之作，為現代旅客打造一系列兼具時尚風格和探險精神的特色體驗。傲途格精選酒店品牌是個性主義者的專屬之選，個性主義者亦是傲途格精選酒店的目標客戶，他們將每一次旅行看作是打造個性故事的機會，因此，無論是休閒度假亦或商務旅行，他們都會毫不猶豫地選擇傲途格精選，因為在他們看來，飯店的意義遠不止提供一處休憩之所。加入傲途格精選酒店，便是加入萬豪國際集團的非凡品牌組合。從這裡 揚帆啟程，發揮個人價值，追求 人生目標，加入 卓越國際團隊，展現 真我風采。

<p>Key Responsibilities: • Supervise the operation, maintenance, and inspection of all lifting equipment across the project/sites. • Manage and lead the personnel within the lifting division, including riggers and equipment operators. • Ensure that repairs and inspections of lifting equipment and lifting gear (slings, spreader beams, chains, shackles) are in full compliance with relevant industry standards and manufacturer recommendations. • Develop and maintain lifting plans, rigging scenarios, and risk assessments for critical, heavy, complex, and tandem lifting activities. • Guide, train, and assess the competency of riggers and operators in line with best practices and company policies. • Monitor and enforce compliance with HSE policies and regulations in all lifting operations. • Ensure the technical integrity and certification validity of crane structures and their components (e.g., chassis, boom, wire ropes, sheaves, LMI systems, safety control circuits). • Maintain effective coordination with manufacturers and dealers on technical issues related to the lifting fleet (including mobile cranes, crawler cranes, manlifts, scissor lifts, forklifts). • Utilize specialized lifting software to generate load charts and design safe and efficient lifting plans. • Advise management on refurbishment, replacement, or disposal strategies for lifting equipment. • Monitor and control spare parts inventory to ensure cost-effective and uninterrupted operations. • Maintain required documentation and reporting related to lifting operations, equipment status, and inspections. • Investigate any lifting-related incidents, identify root causes, and implement corrective actions to prevent recurrence.</p><p>Qualifications and Skills: • Bachelor’s Degree or Diploma in Mechanical Engineering • Minimum 12 years of experience in lifting equipment • Prior experience in Oil & Gas projects is highly preferred • Strong leadership and communication skills with a commanding personality • Solid knowledge of international lifting standards and safety regulations • Proficiency in Microsoft Office; knowledge of AutoCAD is an added advantage • Fluent in spoken and written English Notes: • Manage technicians • Lifting equipment • 500 tons to 1000 tons • No process of lifting • Good experience in repairing • It's all about repairing, fixing and maintaining of all equipment's • He has to manage all fixing • Should know about fixing • He is not going to do all the fixing and repair, but he should be aware of each and everything • Not sitting in cabin • Moves in yard • Checks all work going well • PMV engineers under him • Equipment inspector under him • All technicians under him • 80% onsite 20% paper work • Experience with Terex Crane / Kobelco Cranes • Apart from cranes, must have experience in Wheel Loaders, Tele Handlers, Lightning Tower, other equipment's in the yard</p>

<p><strong><u>Key Responsibilities:</u></strong></p><ul><li><p>Supervise the operation, maintenance, and inspection of all lifting equipment across the project/sites.</p></li><li><p>Manage and lead the personnel within the lifting division, including riggers and equipment operators.</p></li><li><p>Ensure that repairs and inspections of lifting equipment and lifting gear (slings, spreader beams, chains, shackles) are in full compliance with relevant industry standards and manufacturer recommendations.</p></li><li><p>Develop and maintain lifting plans, rigging scenarios, and risk assessments for critical, heavy, complex, and tandem lifting activities.</p></li><li><p>Guide, train, and assess the competency of riggers and operators in line with best practices and company policies.</p></li><li><p>Monitor and enforce compliance with HSE policies and regulations in all lifting operations.</p></li><li><p>Ensure the technical integrity and certification validity of crane structures and their components (e.g., chassis, boom, wire ropes, sheaves, LMI systems, safety control circuits).</p></li><li><p>Maintain effective coordination with manufacturers and dealers on technical issues related to the lifting fleet (including mobile cranes, crawler cranes, manlifts, scissor lifts, forklifts).</p></li><li><p>Utilize specialized lifting software to generate load charts and design safe and efficient lifting plans.</p></li><li><p>Advise management on refurbishment, replacement, or disposal strategies for lifting equipment.</p></li><li><p>Monitor and control spare parts inventory to ensure cost-effective and uninterrupted operations.</p></li><li><p>Maintain required documentation and reporting related to lifting operations, equipment status, and inspections.</p></li><li><p>Investigate any lifting-related incidents, identify root causes, and implement corrective actions to prevent recurrence.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong><u>Qualifications and Skills:</u></strong></p><ul><li><p>Bachelor’s Degree or Diploma in Mechanical Engineering</p></li><li><p>Minimum 12 years of experience in lifting equipment</p></li><li><p>Prior experience in Oil & Gas projects is highly preferred</p></li><li><p>Strong leadership and communication skills with a commanding personality</p></li><li><p>Solid knowledge of international lifting standards and safety regulations</p></li><li><p>Proficiency in Microsoft Office; knowledge of AutoCAD is an added advantage</p></li><li><p>Fluent in spoken and written English </p><br></li></ul><p><strong><u>Notes:</u></strong></p><p>Manage technicians</p><p>Lifting equipment</p><p>500 tons to 1000 tons</p><p>No process of lifting</p><p>Good experience in repairing</p><p>It's all about repairing, fixing and maintaining of all equipment's</p><p>He has to manage all fixing</p><p>Should know about fixing</p><p>He is not going to do all the fixing and repair, but he should be aware of each and everything</p><p>Not sitting in cabin</p><p>Moves in yard</p><p>Checks all work going well</p><p>PMV engineers under him</p><p>Equipment inspector under him</p><p>All technicians under him</p><p>80% onsite 20% paper work</p><p>Experience with Terex Crane / Kobelco Cranes</p><p>Apart from cranes, must have experience in Wheel Loaders, Tele Handlers, Lightning Tower, other equipment's in the yard</p>