Glass Technician Jobs in Qatar

<p>• Inspect, test, and maintain surface-supplied diving equipment including helmets, masks, umbilical hoses, and pneumatic systems • Service and repair scuba regulators, cylinders, BCDs, valves, and gauges • Maintain and troubleshoot diving compressors, air filtration systems, and gas mixing panels • Test and repair diver communication systems (hardwired and wireless) • Inspect and maintain hyperbaric chambers, medical locks, and associated life support equipment • Perform routine preventive maintenance on all diving equipment per manufacturer schedules • Maintain accurate equipment logs, inspection reports, and certification records • Ensure all diving equipment meets IMCA, ADCI, or equivalent commercial diving standards • Coordinate with dive supervisors for equipment readiness before dive operations • Identify faulty or worn components and initiate repairs or replacements • Test breathing air quality for oxygen content, carbon monoxide, and moisture levels • Maintain inventory of spare parts, tools, and diving consumables • Assist in mobilizing and demobilizing diving systems for offshore or project sites • Ensure compliance with safety regulations and proper storage of diving equipment • Liaise with third-party testing agencies for equipment certifications (e.g., cylinder hydrostatic testing). • Provide technical support to dive teams during operations.</p><p>• Diploma or certification in Diving Equipment Technology, Mechanical Engineering, or related field • Minimum 3-5 years of experience as a Diving Equipment Technician in commercial diving, offshore, or military diving operations • Certified as an HSE/IMCA Diving Equipment Technician or equivalent • Strong knowledge of diving equipment brands (Kirby Morgan, AGA, Poseidon, Apeks, etc.) • Experience with high-pressure systems (up to 300 bar) and breathing air quality testing • Familiarity with IMCA, ADCI, or OSHA diving regulations • Valid certification in compressor maintenance and air filtration systems is a plus • Basic electrical and electronic troubleshooting skills for communication systems • Ability to read technical manuals, schematics, and maintenance procedures Required Skills: • Strong mechanical aptitude and attention to detail • Excellent problem-solving and diagnostic abilities • Ability to work under pressure and meet operational deadlines • Good communication and teamwork skills • Commitment to safety and quality standards • Fluency in English Physical Requirements: • Ability to lift and handle heavy equipment (up to 25 kg) • Comfortable working in workshop, dock, and offshore environments • Willingness to travel and work on offshore rotations as required Why Join Us? • Competitive salary with offshore allowances • Opportunity to work with professional dive teams • Career growth in diving equipment management • Accommodation, transport, and benefits as per policy Apply Now Note: Candidates with IMCA-recognized technician certifications and offshore diving project experience will be given priority.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Mechanical Technician ( Oil &amp; Gas) We are seeking an experienced and safety-driven Oil and Gas Mechanical Technician. In this role, you will execute preventative, predictive, and corrective maintenance on high-pressure systems, heavy rotating machinery, and static plant equipment. Because this position operates within a high-hazard environment, a flawless commitment to process safety regulations and emergency response procedures is mandatory. Responsibilities: Perform precise overhauls, laser alignments, and mechanical seal replacements on critical assets including centrifugal pumps, gas compressors, turbines, and fans. Inspect, service, and repair static equipment such as pressure vessels, heat exchangers, distillation columns, storage tanks, and industrial piping networks. Troubleshoot and fix high-pressure hydraulic control systems, actuator valves, and pneumatic instrumentation devices. Execute safe bolt-torquing, flange management, and gasket replacements in compliance with ASME standards to ensure leak-free operations. Use specialized tools like dial indicators, micrometers, and vibration analysis equipment to monitor machine health and diagnose early stages of wear. Deep understanding of hydrocarbon processing hazards, ATEX/hazardous zone classifications, and standard industry print reading (P&amp;IDs, Isometrics).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Mechanical Engineering. Minimum 5+ years of Experience in Oil &amp; Gas / Petrochemical Industry</p><p></p></section>

The Body Shop Administrator is responsible for supporting the day-to-day administrative operations of the automotive body shop. The role involves coordinating repair documentation, maintaining customer and insurance records, managing job cards, tracking vehicle progress, coordinating with technicians, vendors, and parts departments, and ensuring smooth workflow while providing excellent customer service.<br>Key Responsibilities Prepare, maintain, and update repair orders, job cards, and customer records. Coordinate vehicle intake and delivery schedules. Liaise with customers regarding repair status and estimated completion dates. Coordinate with insurance companies for approvals, claims, and documentation. Process purchase orders, invoices, and supplier payments. Coordinate with the parts department to ensure timely availability of spare parts. Maintain inventory records for body shop consumables and office supplies. Prepare daily, weekly, and monthly operational reports. Maintain accurate filing of repair documents, estimates, invoices, and warranty records. Support the Body Shop Manager in scheduling jobs and monitoring workflow. Record technician attendance and maintain administrative records. Handle customer inquiries, telephone calls, emails, and appointment scheduling. Ensure compliance with company policies, safety standards, and documentation procedures. Assist in coordinating external vendor services and subcontracted repairs when required. Perform other administrative duties assigned by the Body Shop Manager.

The Body Shop Administrator is responsible for supporting the day-to-day administrative operations of the automotive body shop. The role involves coordinating repair documentation, maintaining customer and insurance records, managing job cards, tracking vehicle progress, coordinating with technicians, vendors, and parts departments, and ensuring smooth workflow while providing excellent customer service.<br>Key Responsibilities Prepare, maintain, and update repair orders, job cards, and customer records. Coordinate vehicle intake and delivery schedules. Liaise with customers regarding repair status and estimated completion dates. Coordinate with insurance companies for approvals, claims, and documentation. Process purchase orders, invoices, and supplier payments. Coordinate with the parts department to ensure timely availability of spare parts. Maintain inventory records for body shop consumables and office supplies. Prepare daily, weekly, and monthly operational reports. Maintain accurate filing of repair documents, estimates, invoices, and warranty records. Support the Body Shop Manager in scheduling jobs and monitoring workflow. Record technician attendance and maintain administrative records. Handle customer inquiries, telephone calls, emails, and appointment scheduling. Ensure compliance with company policies, safety standards, and documentation procedures. Assist in coordinating external vendor services and subcontracted repairs when required. Perform other administrative duties assigned by the Body Shop Manager.

<p><strong>Key Tasks and Responsibilities:</strong></p><ul><li><p>Examine welds/materials by Radiography (RT), Ultrasonic (UT), Magnetic Particle (MT), and Dye Penetrant (PT) based on code and contractual specifications</p></li><li><p>Determine conformity/non-conformity flaws and report accurately</p></li><li><p>Perform NDT examination of welds and materials by anyone of the following materials and qualifications (i.e., RT, UT, PT, MT) by a written Project NDT plan, NDT Procedures, code, and Contractual Specification</p></li><li><p>Execute the examination by approved NDT procedures and internationally recognized codes/specs. &nbsp;</p></li><li><p>Determine acceptance/rejection based on the defined criteria. The technician shall liaise with the assigned QC inspector to determine the completion of rectification work</p></li><li><p>Report conforming work for rectification; Rectified and inspected by the QC inspector before examination by the original NDT method. The NDT technician shall liaise with the assigned QC inspector to determine the completion of rectification work</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Essential Qualificati0ons and Education:</strong></p><ul><li><p>5+ years of Engineering Degree/ High School Diploma</p></li><li><p>4+ years in Radiography or ultrasonic</p></li><li><p>ASNT or CSWIP qualification</p></li><li><p>Be occupationally qualified to internationally recognized schemes to determine competency (i.e., PCN, CSWIP, ASNT, etc.) requirements</p></li><li><p>Proficient in assessing examination results accurately, sentencing welds, and reporting same, according to the relevant code/spec acceptance criteria</p></li></ul><p><br></p><p>#LI-JG2</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Control and Instrumentation Technician - ( 1 ) </b><br> <div> <div> <b>Position:</b> </div> <div> Control and Instrumentation Technician - (1)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> May 31, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <ul> <li> Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</li> <li> Check and maintain existing wiring installations for all Low Current System and Control System equipment.</li> <li> Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</li> <li> Provide tuning for controls and equipment.</li> <li> Test equipment and controls after maintenance has been done.</li> <li> Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</li> <li> Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</li> <li> Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</li> <li> May provide assistance to control engineer in design/drawings of modifications.</li></ul></div></div></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We're Hiring – QA/QC Technician</p><p>Industry: HDPE Pipes &amp; Fittings Manufacturing</p><p><br></p><p>We are looking for a dedicated QA/QC Technician to join our Quality team.</p><p><br></p><p><b>Responsibilities</b>: </p><p><br></p><ul><li>Execute precise testing procedures to verify product conformity to specifications and industry standards.</li><li>Conduct detailed inspections of raw materials, in-process components, and finished goods, identifying deviations.</li><li>Document all testing results, observations, and non-conformances accurately in compliance with quality systems.</li><li>Operate and maintain calibrated testing equipment, ensuring its readiness and reliability for accurate measurements.</li><li>Collaborate with production and engineering teams to troubleshoot quality issues and implement corrective actions.</li><li>Perform root cause analysis on defects and contribute to the development of preventative measures.</li><li>Maintain a clean and organized work area, adhering to safety protocols and Good Manufacturing Practices (GMP).</li><li>Participate in internal audits and support external regulatory inspections by providing necessary documentation.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements</b>:</p><ul><li>Strong attention to detail and a methodical approach to problem-solving.</li><li>Excellent documentation and record-keeping skills.</li><li>Ability to interpret technical drawings and specifications.</li><li>Effective communication skills, both written and verbal, to report findings clearly.</li><li>High School Diploma or equivalent; Associate's degree in a technical field preferred.</li><li>Proven experience (1+ years) in a Quality Assurance or Quality Control role within a plastic manufacturing, HDPE pipe extrusion, or a similar industry.</li><li>Familiarity with ISO 9001 or other relevant quality management systems.</li><li>Valid Transferable QID.</li><li>Immediate joiners preferred.</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><b>REQUIREMENT</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FABRICATOR 57-63 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER MECHANICAL 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER OPERATION 41-45QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER PIPE 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER VALVE 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MILLWRIGHT 44-48 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MILLWRIGHT TECHNICIAN 60-65 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MACHINIST 2500-3000 QAR</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">HSE TECHNICIAN 55-60 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FIRE/HOLE WATCH 39-47 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Must be able to read, write and speak English. Educational qualifications : Diploma fire /Safety / IOSH /NEBOSH, Must have more than 03 years experience + Client test qualified</span></div></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>You ll support day-to-day pharmacy operations in Doha, Qatar, preparing and dispensing medications under pharmacist supervision while helping maintain safe, accurate, and well-organized medication workflows. In this role, you ll work across prescription intake, labeling, packaging, dispensing support, inventory control, cold chain monitoring, and medication accountability. You ll also help maintain documentation, support patient counseling workflows, and contribute to medication safety practices including error reporting and adverse drug reaction reporting.</p><p>The source JD specifically includes prescription intake, accurate packaging and dispensing, patient counseling support, cold chain pharmaceutical monitoring, controlled substance accountability, and medication usage tracking.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h3>Requirements</h3><ul><li>3+ years of pharmacy technician experience</li><li>Current and unrestricted license or authorizing document from country of residence.</li><li>Completion of a formal pharmacy technician training program or higher in country of origin.</li><li>Ability to obtain provided American Heart Association BLS certification.</li><li>Ability to obtain a base security clearance; ability to relocate to Qatar for an unaccompanied assignment; valid passport from Country of Record required before relocation and must be maintained during assignment.</li><li>Ability to work in an international site-based healthcare environment, including prolonged sitting/standing, bending, stooping, and lifting at least 15 lbs.</li></ul><h3>Preferred</h3><ul><li>Experience with EMR systems, medication inventory management, cold chain pharmaceuticals, or controlled substance accountability preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Integra Projects and Facility Management (IPFM) company in Qatar Online Interview - Immediate Departure.</p><p>The candidate will be responsible for supervising preventive and corrective maintenance activities related to HVAC, electrical, plumbing and building systems while ensuring smooth facility operations and SLA compliance.</p><p>The candidates will be responsible for preventive and corrective maintenance, troubleshooting, and ensuring smooth operation of building MEP systems.</p><p>The candidates will be responsible for preventive and corrective maintenance, troubleshooting and ensuring smooth operation of building MEP systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Electrical Engineer (3 Yrs Degree in Electrical)</li><li>Electrical Supervisor (3 Yrs Diploma in Electrical)</li><li>Mechanical Engineer (3 Yrs Degree in Mechanical)</li><li>Mechanical Supervisor (3 Yrs Diploma in Mechanical)</li><li>Minimum 5 years of relevant experience in Operations &amp; Maintenance of MEP systems / Facilities Management and healthcare facilities maintenance,</li><li>Electrical Technician (3 Yrs Diploma / 2 Yrs ITI)</li><li>HVAC Technicians (3 Yrs Diploma/2 Yrs ITI)</li><li>Minimum 5 years of relevant experience in Operations &amp; Maintenance of MEP systems/ Facilities Management and healthcare facilities maintenance.</li><li>Mechanical Fitter &amp; Welder (2 yrs ITI/1 Yr Professional Trade Course Certificate)</li><li>Plumber (2 yrs ITI/1 Yr Professional Trade Course Certificate)</li><li>Carpenter (2 yrs ITI/1 Yr Professional Trade Course Certificate)</li><li>Painter (2 yrs ITI/1 Yr Professional Trade Course Certificate)</li><li>Minimum 5 years of relevant experience in service sector and in healthcare facilities maintenance.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Tech Control Facility Technician IISeize your opportunity to make a personal impact as a Tech Control Facility Technician II supporting AFCENT under the CTSS-series contract. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As a TCF Tech II you will help ensure today is safe and tomorrow is smarter. Our work depends on you joining our team to leverage your intermediate hands on work experience in support of installations, repair, and troubleshooting / maintenance of communications systems / equipment.HOW A Tech Control Facility Technician II WILL MAKE AN IMPACT Fabricates, installs, maintains, and repairs electronic, mechanical, and/or other types of components and equipment. Must have the technical knowledge to solve complex problems, understand the interrelationships of circuits, and be able to exercise independent judgment in performing tasks in support of communications systems or equipment. May coach and review the work of less-experienced professionals. Provides advice and a range of onsite training for customer support personnel.WHAT YOU LL NEED TO SUCCEED: Required Technical Skills: Intermediate hands on work experience in support of installations, repair, and troubleshooting or maintenance of communications systems or equipment. Must have the technical knowledge to solve complex problems, understand the interrelationships of circuits, and be able to exercise independent judgment in performing tasks in support of communications systems or equipment. Security Clearance Level: SECRET Required Skills and Abilities: Must meet the certification requirement of DoW 8570.01-M or otherwise stated in SPIN-C or individual task order. The contractor is expected to have, but is not limited to, the following IT certificate: Security+ Cisco Certified Network Associate (CCNA) Routing &amp; Switching or Service Provider Preferred Skills: Desired Education: Associates of Arts/Associates of Science Desired Experience: 3+ years of related experience Location: On Customer Site US Citizenship Required (for clearance) Must meet the certification requirement of DoW 8570.01-M or otherwise stated in SPIN-C or individual task order. The contractor is expected to have, but is not limited to, the following IT certificate: Security+ Cisco Certified Network Associate (CCNA) Routing and Switching or Service ProviderGENERAL EXPERIENCE:Intermediate hands on work experience in support of installations, repair, and troubleshooting or maintenance of communications systems or equipment. Must have the technical knowledge to solve complex problems, understand the interrelationships of circuits, and be able to exercise independent judgment in performing tasks in support of communications systems or equipment.SPECIALIZED EXPERIENCE:Intermediate experience in maintenance/troubleshooting of Tech Control Facility equipment as specified in the task order to include the following: NET Promina equipment KG, KY, KIV and ancillaries CISCO Routers/Switches Patch panels/maintenance panels Fiber optic modems and interface cardsGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from #DefenseOCONUS</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Summary:<br>The Group Leader for JLR will be responsible for overseeing all workshop operations to ensure efficiency and quality standards are maintained. They will work closely with Workshop Controller, Technicians, and Service Advisors to plan daily workloads, monitor job progress, and ensure compliance with manufacturers' repair procedures and warranty guidelines.<br><br>Job Responsibility:<br>- Raise job cards for all vehicles in the workshop<br>- Plan daily workload with Workshop Controller<br>- Monitor technician efficiency and accuracy in time recording<br>- Ensure all repairs follow manufacturers' procedures<br>- Monitor repair estimates and completed repairs<br>- Inspect final repairs and conduct road tests<br>- Monitor warranty repairs and maintain warranty compliance<br>- Provide leadership and supervision for the Aftersales staff<br>- Make recommendations for workshop tools, equipment, and training requirements<br>- Ensure workshop cleanliness and compliance with Health &amp; Safety regulations<br><br>Candidate Requirements:<br>- Certificate/Diploma in any Technical Automotive course or Equivalent<br>- Minimum of 5 years of experience in the automotive industry<br>- At least 2 years of experience as a team or group leader in an automotive dealership<br>- Level 3 certification in JLR excellence<br>- Proven experience in leading a team<br>- Strong communication skills in English<br>- Systematic work approach<br>- Ability to work independently and as a team player<br>- Deadline-oriented<br>- Knowledge of 5S principles (Sort, Set in Order, Shine, Standardize, Sustain)<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Leadership skills<br>- Excellent communication abilities<br>- Strong decision-making skills<br>- Ability to delegate tasks effectively<br>- Conflict resolution skills<br>- Team building skills<br>- Time management skills<br>- Problem-solving skills<br>- Adaptability and flexibility<br>- Strategic thinking and planning skills<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A leading facilities management organization is seeking an experienced <strong>AV Technician</strong> for a <strong>temporary contract (approximately 3 months)</strong> to support operations within a prestigious hospitality environment.</p><br><br><p>The successful candidate will be responsible for the installation, maintenance, operation, and troubleshooting of audiovisual systems, satellite TV (SMATV) infrastructure, and event support to ensure uninterrupted services across guest rooms, meeting spaces, and conference facilities.</p><br><br>Key Responsibilities<ul><li>Install, configure, maintain, and troubleshoot audiovisual and SMATV systems.</li><li>Carry out preventive and corrective maintenance of AV equipment.</li><li>Monitor RF distribution networks and TV signal quality.</li><li>Install and terminate coaxial, Cat5e/Cat6, fibre optic, and HDMI cabling.</li><li>Set up and operate AV equipment for meetings, conferences, banquets, and special events.</li><li>Configure projectors, LED displays, LCD TVs, microphones, speakers, amplifiers, digital mixers, and presentation systems.</li><li>Conduct sound checks, equipment testing, and system verification before events.</li><li>Provide on-site technical support during live events.</li><li>Maintain AV equipment inventory and maintenance records.</li><li>Ensure all work complies with company safety procedures and manufacturer guidelines.</li></ul>Requirements<ul><li>Diploma or ITI in Electronics, Electrical, AV Technology, or a related field.</li><li>Minimum <strong>2 years' experience</strong> in an AV Technician role.</li><li>Experience with SMATV systems and professional audiovisual equipment.</li><li>Knowledge of RF distribution systems and structured cabling.</li><li>Experience supporting conferences, meetings, and live events.</li><li>Strong troubleshooting and fault-finding skills.</li><li>Good communication and customer service skills.</li><li>Able to work flexible hours when required.</li></ul>Preferred<ul><li>Previous experience within hotels, hospitality, or facilities management.</li><li>Experience supporting conference and banquet operations.</li><li>AV-related certifications are an advantage.</li></ul>Contract Details<ul><li><strong>Contract Type:</strong> Temporary (approximately 3 months)</li><li><strong>Start Date:</strong> Immediate</li><li><strong>Location:</strong> Qatar</li></ul> <br><br> </div>

Electrical Technician - ( 2 ) <br> <div> <div> <b>Position:</b> </div> <div> Electrical Technician - (2)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> May 31, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <ul> <li> Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</li> <li> Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</li> <li> Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</li> <li> Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</li> <li> Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</li> <li> Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</li> <li> Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</li> <li> Generate technical layouts and technical reports.</li> <li> Understand and implement the basis of the Computer Maintenance Management Systems</li> <li> Perform thermo graphic and analysis for the electrical equipment.</li> <li> Provide assistance and guidance to other technical teams, whenever required</li> <li> Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</li> </ul> </div> </div> <br> <br>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Electrical Technician - ( 2 ) <br> <div> <div> <b>Position:</b> </div> <div> Electrical Technician - (2)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> May 31, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <ul> <li> Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</li> <li> Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</li> <li> Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</li> <li> Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</li> <li> Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</li> <li> Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</li> <li> Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</li> <li> Generate technical layouts and technical reports.</li> <li> Understand and implement the basis of the Computer Maintenance Management Systems</li> <li> Perform thermo graphic and analysis for the electrical equipment.</li> <li> Provide assistance and guidance to other technical teams, whenever required</li> <li> Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</li></ul></div></div></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Electrical Technician - ( 2 ) <br> <div> <div> <b>Position:</b> </div> <div> Electrical Technician - (2)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> May 31, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <ul> <li> Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</li> <li> Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</li> <li> Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</li> <li> Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</li> <li> Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</li> <li> Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</li> <li> Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</li> <li> Generate technical layouts and technical reports.</li> <li> Understand and implement the basis of the Computer Maintenance Management Systems</li> <li> Perform thermo graphic and analysis for the electrical equipment.</li> <li> Provide assistance and guidance to other technical teams, whenever required</li> <li> Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</li> </ul> </div> </div> <br> <br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Title: ITSM Administrator (ManageEngine) <br>Location:<br>Doha, Qatar <br>Experience: 6 7 Years Employment Type: Full-Time <br> <br><b> Job Summary </b>We are seeking a skilled ITSM Administrator with hands-on experience in ManageEngine ITSM solutions, primarily ServiceDesk Plus. The role is responsible for administration, configuration, enhancement, and operational support of the ITSM platform, ensuring alignment with ITIL best practices and business requirements. Key Responsibilities ITSM Platform Administration Administer and maintain ManageEngine ServiceDesk Plus environment. Configure and manage Incident, Service Request, Problem, Change, Asset, and Knowledge Management modules. Create and maintain service catalogs, request templates, workflows, and approval processes. Configure SLAs, OLAs, business rules, notifications, and escalation matrices. Manage user roles, permissions, groups, and technician access. Process Automation &amp; Enhancement Develop and maintain automation rules, business workflows, and custom scripts. Support integration with Active Directory, Azure AD, Email, Monitoring Tools, and CMDB. Implement process improvements aligned with ITIL best practices. Participate in platform upgrades, patches, and feature enhancements. Reporting &amp; Analytics Develop dashboards and operational reports. Monitor KPI compliance including SLA achievement, ticket aging, backlog, and technician performance. Generate management reports and service performance metrics. ITSM Operations Support Provide L2 support for ITSM platform-related incidents and service requests. Troubleshoot application issues and coordinate with vendor support when required. Perform regular health checks and system maintenance activities. Ensure system availability, security, and performance. Documentation &amp; Governance Maintain technical documentation, SOPs, and configuration records. Support audits and compliance requirements. Ensure platform configurations are aligned with organizational standards. Required Qualifications Education Bachelor's Degree in Computer Science, Information Technology, or related field. Experience 4 7 years of ITSM administration experience. Minimum 3 years hands-on experience with ManageEngine ServiceDesk Plus. Experience in enterprise IT support environments. Technical Skills Mandatory ManageEngine ServiceDesk Plus ITIL Incident, Problem, Change, Request Management Active Directory Integration Microsoft SQL Server Workflow Configuration SLA Management Reporting &amp; Dashboard Development Email Integration (Exchange / O365) Preferred ManageEngine AssetExplorer ManageEngine Analytics Plus ManageEngine OpManager ManageEngine Endpoint Central REST APIs and Integrations Azure AD / Microsoft 365 PowerShell or scripting experience Certifications (Preferred) ITIL v4 Foundation ManageEngine ServiceDesk Plus Certification Microsoft Azure Fundamentals (AZ-900) Microsoft 365 Fundamentals (MS-900) Key Competencies Strong troubleshooting and analytical skills. Understanding of ITIL processes. Customer-focused mindset. Good communication and stakeholder management skills. Ability to work independently and manage multiple priorities. </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Summary:<br>The Group Leader for JLR will be responsible for overseeing all workshop operations to ensure efficiency and quality standards are maintained. They will work closely with Workshop Controller, Technicians, and Service Advisors to plan daily workloads, monitor job progress, and ensure compliance with manufacturers' repair procedures and warranty guidelines.<br><br>Job Responsibility:<br>- Raise job cards for all vehicles in the workshop<br>- Plan daily workload with Workshop Controller<br>- Monitor technician efficiency and accuracy in time recording<br>- Ensure all repairs follow manufacturers' procedures<br>- Monitor repair estimates and completed repairs<br>- Inspect final repairs and conduct road tests<br>- Monitor warranty repairs and maintain warranty compliance<br>- Provide leadership and supervision for the Aftersales staff<br>- Make recommendations for workshop tools, equipment, and training requirements<br>- Ensure workshop cleanliness and compliance with Health &amp; Safety regulations<br><br>Candidate Requirements:<br>- Certificate/Diploma in any Technical Automotive course or Equivalent<br>- Minimum of 5 years of experience in the automotive industry<br>- At least 2 years of experience as a team or group leader in an automotive dealership<br>- Level 3 certification in JLR excellence<br>- Proven experience in leading a team<br>- Strong communication skills in English<br>- Systematic work approach<br>- Ability to work independently and as a team player<br>- Deadline-oriented<br>- Knowledge of 5S principles (Sort, Set in Order, Shine, Standardize, Sustain)<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Leadership skills<br>- Excellent communication abilities<br>- Strong decision-making skills<br>- Ability to delegate tasks effectively<br>- Conflict resolution skills<br>- Team building skills<br>- Time management skills<br>- Problem-solving skills<br>- Adaptability and flexibility<br>- Strategic thinking and planning skills<br> </div>

Mechanical Technician (Rotating) - ( 2 ) <br> <div> <div> <b>Position:</b> </div> <div> Mechanical Technician (Rotating) - (2)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> May 31, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <ul> <li> Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to <strong>MECHANICAL ROTATING ASPECTS </strong>of process and non-process equipment and its sub-systems, as below equipment:</li> </ul> <p> 1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p> <p> 2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p> <p> 3. Air Compressor</p> <p> 4. AHU fans and blower</p> <p> 5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p> <p> 6. Mechanical forklift</p> <p> 7. Mechanical manlift</p> <p> 8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p> <ul> <li> Supervise, guide, and monitor work done by external vendors.</li> <li> Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li> <li> Obtain spare parts, materials, and consumables either from internal store or external location.</li> <li> Utilize, maintain and safe keep specific tools assigned by company.</li> <li> Maintain proper tools, PPE s, Spares and provide annual requirements.</li> <li> Respond to emergency situations during or after hours as part of business continuity.</li> <li> Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</li> <li> Where applicable, aid and support to other team members within and across the discipline, whenever required.</li> <li> Participate in QC provided training as deemed fit by management.</li> <li> Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li> </ul> </div> </div> <br> <br>

<p>Join our team as a Service Technician, troubleshooting, and maintaining advanced laundry and kitchen equipment. Ensure smooth performance and customer satisfaction through routine inspections and technical support.</p>