Embedded Systems Engineer Jobs in Qatar

<p>Supervise the activities of QA/QC Inspectors, Contract hired Engineers/Inspectors and ND Technicians to ensure compliance with procedure requirements and perform the supervisory function at the level established for the position.<br>Conduct metallurgical failure analysis on failed plant or offshore components to establish the cause of failure and recommendations. This involves preparation of the survey plan, mobilizing the Contractor, leading and supervising the activities.<br>Provide support to relevant Dept for QA/QC matters related to procurement of materials and equipment. Review purchase requisition for Inspection and certification requirements, technical bid evaluation, appointment of TPI and ensuring the inspection of material receiving at warehouse.<br>Review and approve all critical repair instructions including Welding Procedure Specification(WPS), Procedure Qualification Records (PQR) and QA/QC reports that are generated by QA/QC Inspectors and Engineers and specify alternative testing and inspection methods as applicable for repair or modification.<br>Participate and provide necessary inputs for Startup Readiness, Lessons learnt, Formal Risk Assessment (FRA), Engineering Management of Change (EMOC) and Root Cause Failure Analysis (RCFA) from QA/QC perspective.<br>Review and provide technical input on the Scope of Work (SOW) for Maintenance contracts related to repair and modification works, performing Technical Bid evaluations for the contracts, review and approve all Contractor documents and ensure compliance to QA/QC requirements during execution including shutdowns.<br>Carryout technical audits as requested on suppliers and contractors Quality Management Systems and provide technical evaluation and recommendation. Perform follow up for the observations and corrective actions.<br>Plan and ensure timely execution of inspection and certification of Gas Cylinders, Portable Tanks and Lifting Equipment as per QA/QC section KPI.<br>Promote quality awareness among OES-Maintenance, Supply Department and Contractors through training, knowledge sharing, and procedure roll out sessions.<br>Complete understanding of Policies and Procedures for Project and Plant QA/QC, eg: Material receiving Inspection, Control of Welding, Pressure testing and assist in revision or updating of the same including support for various other QA/QC Procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Engineering</li><li>Professional certifications in welding, NDT, Inspection or Auditing</li><li>6 years' experience in QA/QC related activities with the Oil and Gas industry.</li><li>Proficiency in the field of design, engineering, procurement, fabrication, inspection and installation of process equipment and piping, including troubleshooting of welding and QA/QC issues.</li></ul>

<p>Company focal point for all permits issued on the site during the Hook-Up and Commissioning phases, assisting the Head of commissioning with PTW planning and work execution deadlines in line with the project schedule.<br>Ensures a strong link is maintained between PTW preparation, HSE requirements and work execution.<br>Confirms compliance with the PTW originator and submission requirements as per the PTW procedures.<br>Provides quality checks of the permits, supporting documents and certificates prior to issue ensuring all the necessary signatures have been obtained and the documentation complies with the PTW system processes and SHE requirements.<br>Audits permit, isolations and associated certificates such as, (CSE) confined space entry and Gas test compliance are in line with the PTW processes and project needs.<br>Supports and attends the PTW coordination and SIMOPS daily meetings and maintains alignment with projects schedules and commissioning delivery.<br>Ensures timely submission and closure of PTW's as per PTW procedure and commissioning schedule.<br>Ensures PTW coordination within the project commissioning/completions team to alleviate potential clashes and SIMOPS with other work parties and disciplines.<br>Provide daily and weekly reporting, liaising with Contractors/Subcontractors for all PTW subjects.<br>Ensure the Contractors/Subcontractors progress, follow up and reporting of failure modes observed in permit to work, precipitate to Lessons Learned for the Company.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma.</li><li>Minimum eight (8) years relevant experience in a similar permit coordinator role with five (5) years' experience with field equipment in a diversified oil and gas processing, petrochemical plant, construction yard or shipyard environment.</li><li>Broad and extensive knowledge of Oil and gas onshore/offshore projects (greenfield and brownfield).</li><li>In depth knowledge of Permit to Work procedures, processes and permit execution, Isolation design, CSE and Gas test protocols, general completions and commissioning documentation in relation to permit to work implementation and control of work design, execution and operation.</li><li>Knowledge of general site safety, hydrotesting, pipe cleaning, flange management, N2he leak testing, ICSS commissioning, loop checking, LV/MV/HV switchgears, power management systems, protection relays, GTC, EDG and GTG's, would be advantageous.</li><li>Experience in Onshore construction, offshore construction, hook-up activities and commissioning onshore / Offshore.</li><li>Preferential to have had exposure and experience of working in Asia yards especially Chinese.</li><li>Ability to speak fluent Chinese would be advantageous.</li><li>Execute work in full compliance with LNG Standards of Business Conduct and LNG Project Management System.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your resume in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Annotation is what helps AI make sense of the world.<br> As an annotator, you may be invited to take part in online projects such as rating AI-generated content, evaluating factual accuracy, or comparing responses — when projects are available.<br> While each project involves unique tasks, contributors may: Carefully review provided data (text, images, or videos); Label or classify content based on project guidelines; Identify and flag factually incorrect, sensitive, inappropriate, or unclear material.<br> What we look for This opportunity is a good fit for candidates open to part-time, non-permanent projects.<br> Ideally, contributors will have: Bachelor’s degree in any discipline; Minimum 1 year of experience in any professional role; Logical thinking, fact-checking and reasoning abilities; Strong attention to detail and ability to understand and follow complex instructions; Strong communication skills, including the ability to ask clarifying questions when needed; Genuine interest in technology and artificial intelligence; Strong written and spoken English (C1+).<br> How it works Apply → Pass qualification(s) → Join a project (when available) → Complete tasks → Get paid Why this freelance opportunity might be a great fit for you Take part in a part-time, remote, freelance project that fits around your primary professional or academic commitments; Participate into advanced AI projects and gain valuable experience that enhances your portfolio; Influence how future AI models understand and communicate in your field of expertise.<br> Project time expectations For this project, tasks are estimated to require around 10-20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation Paid per accepted task.<br> Your rate depends on the qualification tier you reach and how efficiently you complete tasks — up to the equivalent of $15/hr .<br> Because payment is per task, a faster pace raises your effective hourly rate.<br> Keep in mind, quality standards must be maintained, regardless of speed.<br></span> </div>

<p>Parsons is looking for an experienced CAD Operator to join our team! In this role, you will support engineering and construction teams by producing accurate technical drawings and plans using computer-aided design (CAD) software, with a particular focus on roads and infrastructure projects. You will ensure that all drawings comply with project requirements, client standards, and applicable design guidelines.</p><p><strong>What You ll Be Doing</strong></p><ul><li>Preparing detailed and accurate drawings, layouts, and plans using AutoCAD and other computer-aided design software for roads, utilities, and related infrastructure works.</li><li>Converting conceptual designs, sketches, and markups from engineers into clear technical drawings and plans.</li><li>Updating and modifying existing drawings to reflect design changes, site instructions, and project updates.</li><li>Coordinating with site teams to ensure that drawings align with actual site conditions and construction progress, including redlines and as-built information.</li><li>Ensuring all drawings are prepared in accordance with client standards, project specifications, and CAD/BIM guidelines.</li><li>Maintaining organized drawing records and ensuring that updated versions are properly stored, indexed, and readily available to project teams.</li><li>Assisting in the preparation of construction documentation, layouts, shop drawings, and as-built drawings for roads and infrastructure projects.</li><li>Collaborating with civil, structural, utilities, and other engineering disciplines to produce accurate and coordinated technical drawings.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>What Required Skills You ll Bring</strong></p><ul><li>Diploma in Civil Engineering, Drafting, or a related field from an accredited institution.</li><li>7 years of demonstrable experience in CAD drafting for construction projects, at least 4 years of experience working on roads and infrastructure projects with a strong understanding of site practices and standard details.</li><li>Proficient in AutoCAD.</li><li>Ability to read and interpret engineering drawings, civil layouts, cross-sections, and standard details.</li><li>Fluent in English, both written and spoken, with good oral and written communication skills.</li><li>Strong computer skills and ability to work with various design software applications and file management systems.</li></ul><p><strong>What Desired Skills You ll Bring</strong></p><ul><li>Familiarity with other CAD tools and basic BIM environments is an advantage.</li><li>Strong attention to detail and accuracy in technical drawing preparation.</li><li>Ability to work under pressure and meet tight deadlines in a fast-paced project environment.</li><li>Excellent organizational and documentation skills, including maintaining drawing logs and revision histories.</li><li>A proactive and solution-oriented mindset when faced with design or technical challenges.</li></ul>

<p>Job Description – Supervisor (Static Equipment)</p><p>Position</p><p><strong>Supervisor – Static Equipment</strong></p><p>Industry</p><p><strong>Oil & Gas / Petrochemical / Refinery / Shutdown Projects</strong></p><p>Job Responsibilities</p><ul><li><p>Supervise and coordinate maintenance, inspection, installation, dismantling, and repair activities related to <strong>static equipment</strong>.</p></li><li><p>Handle equipment such as <strong>pressure vessels, columns, reactors, heat exchangers, tanks, drums, boilers, and related piping systems</strong>.</p></li><li><p>Plan daily work activities and allocate manpower according to project requirements.</p></li><li><p>Supervise <strong>opening, cleaning, inspection, maintenance, reassembly, and box-up</strong> of static equipment.</p></li><li><p>Coordinate with <strong>Mechanical, QA/QC, Inspection, Scaffolding, Rigging, HSE, and Operations teams</strong>.</p></li><li><p>Ensure all work is carried out according to approved <strong>method statements, drawings, procedures, and client specifications</strong>.</p></li><li><p>Monitor manpower, tools, equipment, and materials required for daily activities.</p></li><li><p>Ensure proper execution of <strong>bolting, gasket replacement, flange management, valve-related activities, and equipment maintenance</strong>.</p></li><li><p>Supervise <strong>rigging and lifting activities</strong> related to static equipment in coordination with the lifting team.</p></li><li><p>Ensure compliance with <strong>PTW (Permit to Work), LOTO, confined-space, gas testing, and other safety requirements</strong>.</p></li><li><p>Conduct toolbox talks and ensure workers follow all applicable HSE procedures.</p></li><li><p>Monitor work progress and prepare daily progress reports.</p></li><li><p>Coordinate with the client/contractor representatives regarding work fronts, priorities, and technical issues.</p></li><li><p>Identify site problems and coordinate with engineers and relevant departments for timely resolution.</p></li><li><p>Ensure proper housekeeping and safe working conditions at the worksite.</p></li><li><p>Maintain quality standards and ensure work is completed within the planned schedule.</p></li></ul><p>Key Equipment Experience</p><p>Candidates should have experience working with one or more of the following:</p><ul><li><p>Pressure Vessels</p></li><li><p>Heat Exchangers</p></li><li><p>Columns / Towers</p></li><li><p>Reactors</p></li><li><p>Storage Tanks</p></li><li><p>Drums</p></li><li><p>Boilers</p></li><li><p>Condensers</p></li><li><p>Filters</p></li><li><p>Static Mechanical Equipment</p></li></ul><p>Required Skills & Experience</p><ul><li><p>Relevant experience in <strong>Oil & Gas, Refinery, Petrochemical, or Shutdown Projects</strong>.</p></li><li><p>Strong experience in <strong>static equipment maintenance and shutdown activities</strong>.</p></li><li><p>Ability to supervise a large workforce and multiple work fronts.</p></li><li><p>Good knowledge of <strong>PTW and industrial safety procedures</strong>.</p></li><li><p>Ability to read and understand <strong>equipment drawings, P&IDs, and maintenance procedures</strong>.</p></li><li><p>Good coordination and communication skills.</p></li><li><p>Ability to work under pressure and meet shutdown/project deadlines.</p></li><li><p><strong>Gulf/Oil & Gas experience preferred.</strong></p></li><li><p>Relevant technical qualification or trade certification preferred.</p></li></ul><p>Safety Responsibilities</p><ul><li><p>Strictly follow company and client HSE policies.</p></li><li><p>Ensure workers use appropriate PPE.</p></li><li><p>Verify work permits and required safety controls before starting work.</p></li><li><p>Ensure compliance with confined-space, working-at-height, lifting, and isolation procedures.</p></li><li><p>Immediately report unsafe conditions, incidents, and near misses.</p></li></ul><p>Preferred Candidate</p><br><p><strong>Desired Candidate Profile</strong></p><p>Experience: 5–10+ years in Oil & Gas / Refinery / Petrochemical / Shutdown projects, with relevant supervisory experience in static equipment.</p>

<p>Achieves budgeted goals by executing sales activities within assigned market segment. Assists in the development of annual sales goals. Assists in the completion of monthly booking report. Ensures own function operates within cost restraints. Maintains effective correspondence. Meets budgeted sales and profit margins for group business, by soliciting, selling, and confirming business as required. Develops data and recommends programs to meet clients needs. Prepares proposals with the Director of Sales that are geared to maximize profit while satisfying guest needs. Utilizes the Winning Edge sales techniques. Solicits files on a timely basis to confirm business. Uses outside sales calls to solicit existing and new guests. Conducts on-site client inspections and entertainment weekly. Contacts in-house guests to foster additional business, repeat bookings, or referrals to other Radisson Hotels. Coordinates activities related to booked business with other departments. Communicates guests requests to all departments in an effective and timely manner. Ensures maximum occupancy on a daily basis by performing follow-ups on progress of groups booked with Front Office. Increases sales volume and profitability by assisting in developing and executing projects for assigned market areas as stated in the Hotel Marketing Plan. Keeps Sales Department informed of group booking status. Communicates with Front Office Manager all group VIP s for appropriate service. Ensures all reservations are tracked correctly for statistical purposes. Liaises with the Accounts Payable Department regarding credit issues. Practices Yes I Can attitude Adheres to RHG s Responsible Business ethics</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Hotel Management, Hospitality, Business Administration, Marketing, or a related field .</li><li>3 - 5 years of hotel sales experience, preferably within a 5-star or luxury hotel.</li><li>Proven experience in corporate sales, leisure sales, local accounts, and travel trade.</li><li>Strong track record of achieving sales targets and generating room and other hotel revenues.</li><li>Excellent communication, negotiation, presentation, and interpersonal skills.</li><li>Ability to develop and maintain strong relationships with corporate clients, travel agencies, tour operators, and key accounts.</li><li>Experience in business development, client acquisition, and account management.</li><li>Ability to conduct sales calls, client visits, hotel inspections, and presentations.</li><li>Good knowledge of the local hospitality market and competitor activities.</li><li>Professional appearance, positive attitude, and a strong commitment to 5-star service standards.</li><li>Strong organizational and time-management skills.</li><li>Proficiency in Microsoft Office and hotel sales/CRM systems.</li><li>Excellent command of English; additional languages are an advantage.</li><li>Willingness to travel locally and attend client meetings and networking activities when required.</li></ul>

<p>Lead the piping engineering discipline skill pool recommending the allocation of technical authorities and ensuring the provision of high-quality technical services to projects. Approve and endorse process engineering designs through delegated technical authorities in accordance with approved standards, codes, and specifications at all stages of the project life cycle. Review and assess concepts, studies, and detailed designs to assess technical suitability, compliance with standards and alignment with end user operational objectives and recommend optimized technical solutions as required. Develop and sustain technical competencies within the discipline by supporting capability building, knowledge transfer and continuous professional development of process engineering resources. Provide technical input to project execution strategies to ensure alignment with discipline and technical requirements, design philosophies and safety and operability standards. Recommend resources planning and deployment to meet the project execution requirements including technical input to recruitment mobilization and competency validation for process personnel. Advise and guide project teams on all piping and layout engineering matters throughout all stages of projects that are from concept, FEED, detailed design, construction, commissioning and startup phases. Plan and coordinate the activities of piping and layout engineers to ensure timely and effective delivery of technical services of technical services to project execution and operational support teams. Support discipline head in managing discipline standards and technical assurance, including implementation of standardization initiatives and compliance oversight across projects. Approve and endorse technical deviations, waivers and variations to approved guidelines, codes, standards and practices within the limits of delegated engineering authority.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Engineering. 8 years of experience in Engineering roles, including 4 years in the oil &amp; gas industry, including 1 year in a supervisory or acting role, or oversight of contractor sub-contractors/service/vendor personnel. Basic knowledge of 3D Modelling software (PDS/SP3D). Senior Piping and Layout Engineering supervisory level with a broad knowledge of NGL Design and Engineering execution on projects including design standards, specifications, codes, safety criteria, offshore facilities design, construction and operations. FEED and EPC have detailed design experience with large utilities systems in Inlet facilities. Skill / knowledge in application of International his area of expertise Excellent written and spoken English. Strong organizational skills. Good analytical and problem-solving skills. Good communication skills. Advanced computer literacy involves the regular use of professional office applications and some technical applications. Knowledge and experience of the Document Control function and Information Management Processes.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your resume in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Annotation is what helps AI make sense of the world.<br> As an annotator, you may be invited to take part in online projects such as rating AI-generated content, evaluating factual accuracy, or comparing responses — when projects are available.<br> While each project involves unique tasks, contributors may: Carefully review provided data (text, images, or videos); Label or classify content based on project guidelines; Identify and flag factually incorrect, sensitive, inappropriate, or unclear material.<br> What we look for This opportunity is a good fit for candidates open to part-time, non-permanent projects.<br> Ideally, contributors will have: Bachelor’s degree in any discipline; Minimum 1 year of experience in any professional role; Logical thinking, fact-checking and reasoning abilities; Strong attention to detail and ability to understand and follow complex instructions; Strong communication skills, including the ability to ask clarifying questions when needed; Genuine interest in technology and artificial intelligence; Strong written and spoken English (C1+).<br> How it works Apply → Pass qualification(s) → Join a project (when available) → Complete tasks → Get paid Why this freelance opportunity might be a great fit for you Take part in a part-time, remote, freelance project that fits around your primary professional or academic commitments; Participate into advanced AI projects and gain valuable experience that enhances your portfolio; Influence how future AI models understand and communicate in your field of expertise.<br> Project time expectations For this project, tasks are estimated to require around 10-20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation Paid per accepted task.<br> Your rate depends on the qualification tier you reach and how efficiently you complete tasks — up to the equivalent of $15/hr .<br> Because payment is per task, a faster pace raises your effective hourly rate.<br> Keep in mind, quality standards must be maintained, regardless of speed.<br></span> </div>

Role: SAP DRC & Tax Compliance Integration Expert Experience: 5–7 years Location: Qatar Notice Period: Immediate–30 days Duration: Long-term<br>Key Responsibilities:<br>Implement and support SAP DRC / e Document / ACR for Qatar tax and e-invoicing requirements. Integrate SAP with Qatar General Tax Authority (GTA) systems using APIs, XML, SAP CPI/PI/PO. Support customer invoicing (SD), vendor invoicing (FI/MM), AP/AR, and Open Text VIM integration. Manage invoice validation, tax compliance checks, electronic submissions, and regulatory reporting. Support Qatar Corporate Tax, VAT, e-invoicing, and digital reporting requirements. Perform end-to-end integration testing, SIT/UAT, deployment, and production support. Troubleshoot tax portal connectivity, invoice validation, and submission failures. Coordinate with SAP FI, SD, MM, VIM, integration teams, vendors, and Qatar GTA.<br>Required Skills:<br>5+ years SAP experience with strong SAP DRC / e Document / ACR expertise. Tax compliance and regulatory reporting experience. Hands-on AP/AR experience. Open Text VIM preferred. SAP CPI / PI / PO, APIs, XML, and integration experience. Qatar tax/e-invoicing experience is highly preferred. Bachelor's degree in IT, Finance, or related

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

We are currently seeking an experienced Lead Generation Executive to join our Marketing & Communications Department. The role will focus on managing customer enquiries, qualifying leads, nurturing prospects, and coordinating with the leasing and sales teams to support lead conversion.<br>Job Responsibilities:Manage enquiries through phone, Whats App, email, website, social media, and property portals. Qualify leads by understanding customer requirements, budget, location, and property preferences. Maintain accurate lead information and follow-up activities in the CRM system. Follow up with prospects and coordinate qualified leads, viewings, and appointments with the relevant teams. Monitor lead progress and prepare regular performance reports.<br>Qualifications:Bachelor’s degree or diploma in Marketing, Business Administration, Sales, Communications, or a related field.2–4 years of experience in lead generation, customer service, telesales, real estate, or a similar role. Strong communication, customer-handling, follow-up, and organizational skills. Good knowledge of CRM systems and Microsoft Office. Real estate or leasing experience is an advantage. Fluent in English; Arabic is an advantage.<br>If you have relevant experience and are interested in exploring this opportunity:Please complete and submit the form (Application Form). Submit your latest CV through Easy Apply.

<p>The Technical/Workshop Assistant is responsible for assisting with the safe delivery of practical based lessons to both General Engineering and Specialty Training to cadets within the BAE Systems Qatar Technical Institute in Doha, Qatar. The Technical/Workshop Assistant will assist with the safe delivery of a range of practical training modules, across both the General Engineering and Specialty programme or within their Mechanical/Electrical trade boundary. The safe delivery of the modules will contribute toward the Technical Institute s commitment to deliver a safe, reliable and high quality training service enabling learners attainment of externally accredited qualifications. The Technical/Workshop Assistant will distribute equipment, materials and assist in keeping the workshop areas clean and tidy in compliance with all SHE regulations and local TI policies. The Instructor/Assessor will actively contribute to the continuing improvement of the QTI, through identification of ideas and embracing the suggestions of others. Core Activity The role will assist with the safe delivery and assessment of a range of practical training modules, intervening and bringing to the attention of instructional staff instances of unsafe or incorrect practices. Predominantly within the workshops but also other practical training areas. The role will distribute tools, equipment, materials and assist in keeping the workshop areas clean and tidy in compliance with all SHE regulations and local TI policies. The role will also assist with other tasks related to the delivery of practical training and assessment activities under the direction of instructional staff as the need arises. Key Accountabilities: Assisting with the safe delivery of a range of practical training modules Ensuring training assistance is delivered in compliance with all SHE regulations and local TI policies. Storage and distribution of tools, equipment and materials Keeping the workshop areas clean and tidy in compliance with all SHE regulations and local TI policies. Prepare workshops/practical areas for classes and clear the workshop/practical areas after the class as directed.</p><p><strong>Desired Candidate Profile</strong></p><p>Level 2 Qualification in an Engineering related discipline Working Knowledge of SHE and its application in an engineering environment Native English speaker or for second language minimum of IELTS 4.5 2yrs training/technical assistance experience gained outside of QTTC assisting with/delivering: Apprentice Engineering training Military Engineering trade training FE College (Engineering or Technology) Ability to speak Arabic is an advantage</p>

<p>Key Result Areas: Conduct data analysis to transform insights into valuable information to support corporate excellence initiatives. Research and recommend corporate excellence best practices, providing guidance on problem solving tools and methodologies. Contribute to develop and implement processes, systems, and practices that enhance operational efficiency and drive continuous improvement. Assist in documenting and tracking special projects initiated or overseen by the CEO Office, ensuring effective coordination with relevant stakeholders to achieve objectives. Support to provide regular progress updates, highlighting risks, dependencies, and escalating issues requiring executive decisions. Support to follow up on corporate risks and internal audit findings, ensuring timely closure of required actions, and provide progress updates and escalations to the Manager of Projects &amp; Corporate Excellence. Coordinate corporate excellence projects in preparing reports, dashboards, and analyses that deliver accurate insights to support informed decision-making. Help facilitate cross-functional collaboration to ensure CEO Office initiatives are delivered within agreed timelines and to a high standard of quality. Monitor the development and implementation of internal policies and procedures, ensuring alignment with QF s policies, governance frameworks, and best practices. Foster a collaborative environment focused on corporate excellence, contributing to Qatarization and supporting others to achieve best practices. Perform other tasks and duties as required to meet the role's requirements and QF s objectives.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Knowledge, Skills &amp; Experience: Bachelor s degree in business administration, Management, Operations Management, Industrial Engineering, or a related field; Master s degree is an advantage. 6 8 years of relevant professional experience, including some exposure to project coordination, governance, or corporate excellence roles. Professional certifications in Project Management (e.g., PMP, PRINCE2), Quality/Excellence (e.g., EFQM Assessor, Lean Six Sigma), or Risk Management are desirable. Proven experience in supporting or managing projects and initiatives, with a demonstrated ability to contribute to successful delivery of planned outcomes. Good organizational skills, with the ability to handle multiple tasks and deadlines effectively. Solid analytical and problem-solving skills, with the ability to collect, interpret, and present data to support decision-making. Experience working in large organizations such as educational institutions, non-profit entities, government, or professional services organizations is an advantage. Ability to collaborate effectively across teams and maintain productive stakeholder relationships. A quality-focused and improvement-driven mindset, with attention to detail.</p>

Job Title: Senior Accountant<br>Experience: 5–8 Years<br> Language: Arabic (Mandatory)<br> Location: Qatar<br>Job Summary<br>We are seeking an experienced Senior Accountant to oversee day-to-day accounting operations, ensure financial accuracy, and support financial reporting and compliance. The ideal candidate should have strong knowledge of accounting principles, taxation, budgeting, and ERP systems.<br>Key Responsibilities<br> Manage the general ledger, journal entries, and month-end/year-end closing.<br> Prepare financial statements, management reports, and account reconciliation.<br> Monitor accounts payable, accounts receivable, payroll, and cash flow.<br> Ensure compliance with Iraqi tax regulations, accounting standards, and company policies.<br> Prepare VAT/tax filings and coordinate with auditors during internal and external audits.<br> Assist in budgeting, forecasting, and financial analysis.<br> Maintain accurate accounting records and support process improvements.<br> Coordinate with banks, vendors, and internal departments on financial matters.<br> <br><br><br>Requirements<br><br>Requirements<br> Bachelor's Degree in Accounting, Finance, or a related field.<br> 5–8 years of accounting experience, preferably in construction, real estate, or engineering.<br> Fluent in Arabic (spoken and written).<br> Strong knowledge of IFRS and Iraqi financial regulations.<br> Proficiency in ERP systems (SAP, Oracle, Odoo, or similar) and Microsoft Excel.<br> Strong analytical, organizational, and communication skills.

Job Title: Senior Accountant<br>Experience: 5–8 Years<br> Language: Arabic (Mandatory)<br> Location: Qatar<br>Job Summary<br>We are seeking an experienced Senior Accountant to oversee day-to-day accounting operations, ensure financial accuracy, and support financial reporting and compliance. The ideal candidate should have strong knowledge of accounting principles, taxation, budgeting, and ERP systems.<br>Key Responsibilities<br> Manage the general ledger, journal entries, and month-end/year-end closing.<br> Prepare financial statements, management reports, and account reconciliation.<br> Monitor accounts payable, accounts receivable, payroll, and cash flow.<br> Ensure compliance with Iraqi tax regulations, accounting standards, and company policies.<br> Prepare VAT/tax filings and coordinate with auditors during internal and external audits.<br> Assist in budgeting, forecasting, and financial analysis.<br> Maintain accurate accounting records and support process improvements.<br> Coordinate with banks, vendors, and internal departments on financial matters.<br> <br><br><br>Requirements<br><br>Requirements<br> Bachelor's Degree in Accounting, Finance, or a related field.<br> 5–8 years of accounting experience, preferably in construction, real estate, or engineering.<br> Fluent in Arabic (spoken and written).<br> Strong knowledge of IFRS and Iraqi financial regulations.<br> Proficiency in ERP systems (SAP, Oracle, Odoo, or similar) and Microsoft Excel.<br> Strong analytical, organizational, and communication skills.

We are currently seeking a reliable and proactive Corporate Support Coordinator to support daily administrative and coordination activities within the department.<br><br>Key Responsibilities:<br><br>Provide day-to-day administrative support to the department Assist in preparing, reviewing, and maintaining corporate documentation and records Support basic finance-related processes (LPOs, invoices, tracking, and filing) Proposals reviewing and submission Lead company official communications Ensure timely submission of documents and adherence to internal procedures Support reporting and data tracking as required Liaise with internal teams and external stakeholders when needed Assist the department in meeting deadlines in a fast-paced environment Provide general coordination and team support as assigned<br><br>Requirements:<br><br>Previous related experience in an administrative or support role Excellent communication skills (written and verbal) Basic understanding of corporate procedures, finance, procurement and documentation processes Experience in tender participation (proposals submission) is a strong advantage Result-oriented with strong attention to the details Quick learner with the ability to adapt to new systems and processes Reliable and responsible Strong team player with a collaborative mindset Able to work under timelines, pressure, and in a fast-moving environment Pleasant and professional personality

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system: Chillers Process Area of FCU, AHU, and Ventilation System Refrigerant recovery, recycling and purifying System On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed. Supervise, guide and monitor work done by external vendors. Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging. Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc. Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant. Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants. Familiarity with vibration analysis, thermography, and other predictive maintenance techniques. Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes. Understanding how to monitor and log key operating parameters to anticipate maintenance needs. Knowledge of environmental regulations related to refrigerant handling and disposal. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns. Work effectively with other team members, including engineers, supervisors, and external vendors. Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves. Where applicable, provide assistance and support to other team members, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law. Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Hiring: Contracts Lead – Restoration Project | Doha, Qatar</strong><br> <strong>Location:</strong> Doha / Ras Laffan, Qatar<br> <strong>Contract Type:</strong> Long-Term Contract<br> <strong>Project:</strong> Restoration Project<br> <strong>Work Type:</strong> 100% Onshore<br> <strong>Rotation:</strong> 12 Weeks ON / 2 Weeks OFF<br> <strong>Working Days:</strong> 6 Days per Week<br> <strong>Working Hours:</strong> 8–10 Hours per Day<br> <strong>Job Purpose</strong><br> We are seeking an experienced <strong>Contracts Lead</strong> to manage contract administration, commercial management, claims, change orders, and dispute resolution activities for a major Restoration Project in Qatar. The successful candidate will play a key role in protecting Company interests, ensuring contractual compliance, mitigating commercial risks, and supporting project delivery objectives.<br> <strong>Key Responsibilities</strong><br> ✅ Lead contract administration and ensure compliance with contractual obligations.<br> ✅ Advise Project Management Teams on contractual and commercial matters.<br> ✅ Review contractor correspondence, notices, claims, and variation requests.<br> ✅ Support negotiations for contract amendments, settlements, and change orders.<br> ✅ Evaluate commercial risks and develop mitigation strategies.<br> ✅ Coordinate with Legal, Supply Chain, Finance, and Project stakeholders.<br> ✅ Monitor contractor performance and ensure contractual compliance.<br> ✅ Maintain contract registers, commercial records, and reporting tools.<br> ✅ Support dispute avoidance and dispute resolution processes.<br> ✅ Prepare contractual reports, presentations, and commercial recommendations.<br> <strong>Requirements</strong><br> ✔ Bachelor's Degree in Business, Engineering, Law, Supply Chain, Project Management, Accounting, Commercial, or related discipline.<br> ✔ Minimum 8 years of experience in contracts/commercial management.<br> ✔ Minimum 4 years of Oil &amp; Gas industry experience.<br> ✔ Experience managing EPC/EPCM contracts.<br> ✔ Strong knowledge of:<ul><li>Contract Administration</li><li>Commercial Management</li><li>Claims &amp; Variations</li><li>Change Management</li><li>Risk Management</li><li>Dispute Resolution</li><li>Contractor Performance Management</li><li>SAP / ERP Systems</li></ul>✔ Experience with:<ul><li>Mediation</li><li>Arbitration</li><li>Litigation Support</li><li>Contract Negotiations</li></ul>✔ Strong written and verbal English communication skills.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Exceptional hospitality starts with you</h4> <p>Picture yourself brightening someone’s day. When you join our hotels team, that’s exactly what you’ll do every time you come to work! As a receiving clerk, you’re not just purchasing goods for the hotel – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Support procurement operations:</strong> Assist with purchasing materials and supplies, researching prices, and ensuring compliance with purchasing policies and procedures.</li> <li><strong>Process and verify deliveries:</strong> Accept all purchased products, ensuring accuracy by checking deliveries against purchase orders, invoices, and specifications.</li> <li><strong>Fulfill requisitions:</strong> Issue and deliver items to departments as requested, maintaining appropriate stock levels and notifying supervisors of low or out-of-stock items.</li> <li><strong>Process invoices:</strong> Receive and process invoices, verify accuracy, scan documents, and follow up on discrepancies to ensure timely payment.</li> <li><strong>Assist with inventory tracking:</strong> Conduct routine inventories, input received merchandise into tracking systems, and report shortages or discrepancies.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member:</p> <ul> <li>A passion for spreading the light and warmth of hospitality.</li> <li>Acting with integrity and always doing the right thing.</li> <li>Inspiring others through leadership.</li> <li>A belief that teamwork drives the best outcomes.</li> <li>A sense of ownership and accountability.</li> <li>A focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</li> </ul> <h4>Join an award-winning workplace culture</h4> <p>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the team members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.</p> <p>Our award-winning culture has earned us repeated recognition on the world’s best workplaces list by Great Place to Work and Fortune. With our suite of world-class brands, and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.</p> <p>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.</p></p><p></p>