Production Engineer Jobs - Doha Qatar
8 Jobs Found
Qatar - Doha
Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.
Qatar - Doha
Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.
Amiantit Qatar Pipes Company
Qatar - Doha
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are looking for a talented and motivated Production Engineer.</p><p> </p><p>In this role, you will be responsible for planning, coordinating, and optimizing manufacturing operations to ensure production targets are achieved safely, efficiently, and to the highest quality standards. You will work closely with cross-functional teams, including Quality, Maintenance, Engineering, to improve production processes, resolve operational challenges, adherence to safety protocols and efficient utilization of resources, and achieve strict deadlines.</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p><b>Requirements:</b></p><p>✔ Bachelor's Degree in Mechanical Engineering</p><p>✔ Minimum 3 years of experience in a production/manufacturing environment</p><p>✔ Strong knowledge of production planning, process optimization, and quality control</p><p>✔ Ability to lead shop-floor operations and drive continuous improvement</p><p>✔ Excellent problem-solving and communication skills</p><p>✔ Hands-on experience with Lathe and CNC machine operations</p><p>✔ Knowledge of machine manufacturing</p></div>
Qatar - Doha
Primary Functions To co-ordinate and supervise the activities of the foremen and his crew on the project. Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities<br><br>Tasks and Responsibilities To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately. To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises. Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable). To be conversant with the specific standards applicable to the project / area of work. To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work. Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely. Interface with the production engineer to ensure material is available for the planned work. To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely. To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility. Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates. Forecast resources required for the planned work ahead (Manpower, Equipment's etc.) To be able to conduct meeting with those reporting to him in an organized manner. To set targets of production for each of those directly reporting to him, targets for Foremen. To be able to communicate supports services in the yard, QC & NDT. Provide written instruction where necessary to those directly reporting to him. Drive the team to achieve progress, productivity, safety and quality. Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers. Take actions where standards and targets are not met. Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement Address any issue of poor quality/ productivity and act where appropriate. Report area of poor performance and provide recommendation for improvement. Provide accurate feedback to Superintendent. Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner. Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process. Review TRA with his foremen when require and ensure it is discussed with his crew. Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety. Lead by example and make sure company policies and procedures are followed. Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection. Interface with F&M department to ensure timely calibration of welding machines. Interface with Welding engineers to qualify WPS, welders for specific project. Proper planning of qualifications in welding school to meet project requirements Other Expectations:Promote implementation of QHSES initiatives and drive achieving objectives<br><br>Education Qualification and Experience<br>Education: High School Diploma Level<br>Experience: 10+ years of experience in Offshore Construction industry Has an exposure to a multidiscipline work environment. Must understand governing code requirements and be able to interpret and apply project specification
Qatar - Doha
Primary Functions To co-ordinate and supervise the activities of the foremen and his crew on the project. Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities<br><br>Tasks and Responsibilities To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately. To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises. Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable). To be conversant with the specific standards applicable to the project / area of work. To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work. Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely. Interface with the production engineer to ensure material is available for the planned work. To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely. To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility. Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates. Forecast resources required for the planned work ahead (Manpower, Equipment's etc.) To be able to conduct meeting with those reporting to him in an organized manner. To set targets of production for each of those directly reporting to him, targets for Foremen. To be able to communicate supports services in the yard, QC & NDT. Provide written instruction where necessary to those directly reporting to him. Drive the team to achieve progress, productivity, safety and quality. Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers. Take actions where standards and targets are not met. Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement Address any issue of poor quality/ productivity and act where appropriate. Report area of poor performance and provide recommendation for improvement. Provide accurate feedback to Superintendent. Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner. Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process. Review TRA with his foremen when require and ensure it is discussed with his crew. Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety. Lead by example and make sure company policies and procedures are followed. Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection. Interface with F&M department to ensure timely calibration of welding machines. Interface with Welding engineers to qualify WPS, welders for specific project. Proper planning of qualifications in welding school to meet project requirements Other Expectations:Promote implementation of QHSES initiatives and drive achieving objectives<br><br>Education Qualification and Experience<br>Education: High School Diploma Level<br>Experience: 10+ years of experience in Offshore Construction industry Has an exposure to a multidiscipline work environment. Must understand governing code requirements and be able to interpret and apply project specification
Qatar - Doha
Primary Functions To co-ordinate and supervise the activities of the foremen and his crew on the project. Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities<br><br>Tasks and Responsibilities To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately. To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises. Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable). To be conversant with the specific standards applicable to the project / area of work. To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work. Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely. Interface with the production engineer to ensure material is available for the planned work. To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely. To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility. Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates. Forecast resources required for the planned work ahead (Manpower, Equipment's etc.) To be able to conduct meeting with those reporting to him in an organized manner. To set targets of production for each of those directly reporting to him, targets for Foremen. To be able to communicate supports services in the yard, QC & NDT. Provide written instruction where necessary to those directly reporting to him. Drive the team to achieve progress, productivity, safety and quality. Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers. Take actions where standards and targets are not met. Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement Address any issue of poor quality/ productivity and act where appropriate. Report area of poor performance and provide recommendation for improvement. Provide accurate feedback to Superintendent. Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner. Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process. Review TRA with his foremen when require and ensure it is discussed with his crew. Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety. Lead by example and make sure company policies and procedures are followed. Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection. Interface with F&M department to ensure timely calibration of welding machines. Interface with Welding engineers to qualify WPS, welders for specific project. Proper planning of qualifications in welding school to meet project requirements Other Expectations:Promote implementation of QHSES initiatives and drive achieving objectives<br><br>Education Qualification and Experience<br>Education: High School Diploma Level<br>Experience: 10+ years of experience in Offshore Construction industry Has an exposure to a multidiscipline work environment. Must understand governing code requirements and be able to interpret and apply project specification
Qatar - Doha
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p><strong>Functionally Reports To</strong>: Construction Superintendent</p><br> <p><span><strong>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**</strong></span></p><br> <p><strong>Primary Functions</strong></p><br>
<ul>
<li>To co-ordinate and supervise the activities of the foremen and his crew on the project.</li>
<li>Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities</li>
</ul> <p><strong>Tasks and Responsibilities</strong></p><br>
<ul>
<li>To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately.</li>
<li>To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises.</li>
<li>Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable).</li>
<li>To be conversant with the specific standards applicable to the project / area of work.</li>
<li>To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work.</li>
<li>Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely.</li>
<li>Interface with the production engineer to ensure material is available for the planned work.</li>
<li>To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely.</li>
<li>To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility.</li>
<li>Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates.</li>
<li>Forecast resources required for the planned work ahead (Manpower, Equipment's etc.)</li>
<li>To be able to conduct meeting with those reporting to him in an organized manner.</li>
<li>To set targets of production for each of those directly reporting to him, targets for Foremen.</li>
<li>To be able to communicate supports services in the yard, QC & NDT.</li>
<li>Provide written instruction where necessary to those directly reporting to him.</li>
<li>Drive the team to achieve progress, productivity, safety and quality.</li>
<li>Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers.</li>
<li>Take actions where standards and targets are not met.</li>
<li>Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement</li>
<li>Address any issue of poor quality/ productivity and act where appropriate.</li>
<li>Report area of poor performance and provide recommendation for improvement.</li>
<li>Provide accurate feedback to Superintendent.</li>
<li>Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner.</li>
<li>Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process.</li>
<li>Review TRA with his foremen when require and ensure it is discussed with his crew.</li>
<li>Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety.</li>
<li>Lead by example and make sure company policies and procedures are followed.</li>
<li>Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection.</li>
<li>Interface with F&M department to ensure timely calibration of welding machines.</li>
<li>Interface with Welding engineers to qualify WPS, welders for specific project.</li>
<li>Proper planning of qualifications in welding school to meet project requirements</li>
</ul>
<p>Other Expectations:</p><br>
<ul>
<li>Promote implementation of QHSES initiatives and drive achieving objectives </li>
</ul> <p><strong>Education Qualification and Experience</strong></p><br>
<p><strong>Education: </strong>High School Diploma Level</p><br>
<p><strong>Experience: </strong></p><br>
<ul>
<li>10+ years of experience in Offshore Construction industry</li>
<li>Has an exposure to a multidiscipline work environment.</li>
<li>Must understand governing code requirements and be able to interpret and apply project specification</li>
</ul>
</div>
Qatar - Doha
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Reporting structure <br></span><p><u><b>Reports To </b></u><br>
Head of Piping Production Workshop</p><br>
<p><u><b>Direct Reports</b></u><br>
Rigging Supervisor</p><br>
<br><br>Job Summary and Purpose <br><p>As a Subject Matter Expert (SME), the Rigging Foreman [Workshop & Project - Rigging & Movement Logistics] provides the technical & technological problem-solving ability of production engineering process and planning abilities in order to lead work teams and control production process for material handling, movement and coordination of piping systems and their components between workshops. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing safe material lifts and movements of piping systems between workshops and projects.</p><br>
<br><br>Accountabilities <br><p><u><b>Key Accountabilities:</b></u><br>
1. Specialize for critical lifting and rigging activities including arranging of crane and forklift service.<br>
2. Responsible for all pipe shop & onboard piping logistics such as pipe and material movements.<br>
3. Leads a rigging group, that ensure loads are secure, lifted according to yard safety standards<br>
4. Coordinates with crane operator to ensure work schedules are not interrupted. All crane lifts need to ensure materials are on location before work starts.<br>
5. Coordinate for forklift operation to shift pipes.<br>
6. Coordinate with Production Engineer (in charge) for sending pipe for coating (blast/paint/galvanize)<br>
7. Coordinate with transport section to arrange transport for outside yard operations i.e., galvanizing and afloat service.<br>
8. Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way. <br>
9. Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate <br>
10. Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt & Project Postmortem) after completion of vessels.</p><br>
<br><br>Accountabilities - 2 <br><p>11. Foster an engaging culture of safe and productive work through role modelling N-KOM's values.<br>
12. Prepare fit for purpose work Permits & Risk Assessments for the identification, control and/or mitigation of workplace risk.<br>
13. Review and update the section Risk Assessments/Environmental Aspects & Impacts as per the latest safe practice and get approval from piping manager.<br>
14. Apply mathematics and statistics to model production systems during decision making process.<br>
15. Design, implement and refine products, services, processes, and systems taking in consideration any constraints and local nuances whether supplier, buyer, substitutes, or new emerging information.<br>
16. Apply appropriate knowledge to design, redesign or improve product & service functionality. Drive and implement process improvements to reduce assembly hours and build cost.<br>
17. Apply concepts and quality techniques throughout the entire production process & system and deploy organizational standards for control proceedings and auditing.<br>
18. Stay up to date with technological developments, enabling them to enterprises and society.<br>
19. Manage and optimize flow (information and production flow).</p><br>
<br><br>Competencies <br>Achievement Oriented<br>Collaboration and Teamwork<br>Customer Centricity<br>Drive_Vision<br>Empower and Nurture Talent<br>Interactive_Communication<br>Solution_Oriented<br><br><br>Key Result Areas <br><p>• Productivity - Set & drive KPI<br>
• Safety - foster zero harm culture<br>
• Quality - implement zero reword principles<br>
• Cost - reduced rework and enable timely delivery<br>
</p><br>
<br><br>Interactions and Working Relations <br><p><b>Internal: </b>Piping Section & All Sections in NKOM</p><br>
<p><b>Purpose:</b> To Educate Pipe Shop Team towards Safety, Health, Environment, Quality & Security. To implement SHEQS Requirements with in Pipe Shop Team. <br>
To Educate Pipe Shop Team about IMS. To Supervise & Perform the Assigned works to Pipe Shop Team. </p><br>
<p><b>External:</b> Clients, Sub-Contractors, Service Engineers & Surveyors.</p><br>
<p><b>Purpose:</b> To understand client requirements, update job status. To understand the Sub contractors / Service engineer requirements and to arrange accordingly. For inspection of Piping Items</p><br>
<br><br>Financial Authorities <br><p>• As per TOFA.</p><br>
<br><br>Qualifications, Experience and Job Skills <br><p><u><b>Qualifications:</b></u><br>
A Diploma in Mechanical, or equivalent working experience and Qualified as Rigging Supervisor in Shipyard and Offshore & Onshore Projects.</p><br>
<p><br>
<u><b>Experience:</b></u><br>
At least 8 years’ relevant working experience Lead in Shipyard Rigging & Lifting. (at least 3 years of experience as Assistant Rigging Foreman role).</p><br>
<p><u><b>Job Specific Competencies:</b></u></p><br>
<p><b>i. Behavioral</b><br>
• Drive Vision<br>
• Interactive Communication<br>
• Customer Centricity<br>
• Solution Oriented<br>
• Empower & Nurture Talents<br>
• Collaboration & Teamwork<br>
• Achievement Oriented</p><br>
<p><b>ii. Technical</b><br>
• Isometric Drawing Interpretation Skill<br>
• Piping and Instrumentation Diagram (P&ID) Drawing Interpretation Skill<br>
• General Arrangement (GA) Drawing Interpretation Skill<br>
• Knowledge of the Marine Piping System <br>
• Knowledge of material standards such as American Society for Testing and Materials (ASTM), American National Standards Institute (ANSI), Japanese Industrial Standards (JIS), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), etc.<br>
• Knowledge of lifting gears <br>
• Knowledge of mode of transportation and lifting equipment’s<br>
• Knowledge of the heavy lifting, logistics and transportation<br>
• Drawing skill for International Organization for Standardization (ISO) and General Arrangement (GA)<br>
• Knowledge of Drawing symbols.<br>
</p><br>
<br><br><br>
</div>