Tour operator Jobs

Job description:<br><br>JOB PURPOSE:To ensure the smooth and continuous operation of the gas and steam turbines, HRSGs, potline rectifiers, associated plant equipment and all related utility services in his designated area of responsibility, in a safe and efficient manner as instructed by the Shift Supervisor or the Main Control Room Operator. KEY ACCOUNTABILITIES:Ensure that all plant and equipment under his control are operated in a safe and efficient manner. Ensure that all instructions are carried out promptly and efficiently. Record routine parameter readings on regular basis and report deviations. Inform the Supervisor (or) control room of any abnormalities/problems on equipment Ensure standby equipment is readily available for service in an emergency. Assist in carrying out routine testing/re-commissioning of plant after maintenance outages. Adopt safe working practices to ensure personal and plant safety. Identify hazards and participate effectively in reporting system. Maintain good standards of housekeeping. Must be fully conversant with all emergency procedures related to the equipment in his designated area of responsibility Carry out on the job training Strive to achieve increased competency Jebel Ali Site, additional roles Operator Turbine & Boiler Assistant Operator At Jebel Ali Site, for the roles of Operator Turbine & Boiler and Assistant Operator, the above accountabilities will be restricted to Gas Turbines, Steam Turbines, associated plant equipment and related utilities. QUALIFICATIONS & SKILLS:Minimum Qualifications:Higher Secondary School Certificate. Minimum Experience:4 years in a power station.2 years’ work experience as Desalination Operator (PG7) or equivalent experience gained working in a similar industry. Skills:Achieved competencies in all areas except DCR operation. English language skills (to prepare and complete shift reports. Intermediate 3 or equivalent level). Communication Skills. Basic numeracy (e.g. concentration, percentage, unit conversion, rate calculations etc.). Ability to understand single line diagram. IT skills. Problem solving skills. Planning and organising skills. Communication skills. Interpersonal skills Teamwork skills.

Job description:<br><br>JOB PURPOSE:To assist the Operator, Cell Relining in the refurbishment of superstructures, cell relining activities such as pot changing, rebuilding pot shell and ensure these are carried out in accordance with standard procedures, safely and efficiently to achieve maximum production. KEY ACCOUNTABILITIES:Assists cell relining operator preparing in advance all necessary tools and equipment required for casting prior to actual operations taking place in a safe and efficient manner. Operates mobile equipment such as forklift, pay loader etc., as required complying with all safety procedures. Assists cell relining operator bricks lining in accordance with required standards and specified designs. Assists in carrying out superstructure refurbishment, welding and fabrication jobs, and capable of performing ramming processes. Maintains a high standard of housekeeping at all times. QUALIFICATIONS & SKILLS:Minimum Qualifications:Completion of training modules specified for PG5 position Minimum Experience:One year of experience in heavy industry is preferable. Skills:Completion of the following courses :Aluminium/Water Explosions Electrical hazards Possession of Forklift Licence Category 7

<p>Department OIL OPERATIONS - DUKHAN Primary Purpose of the Job Operate and adjust production facilities as directed by General Operator/ Senior Operator within designated limits to ensure maximum recovery/injection on assigned shift.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 years' experience in operating process plant in the oil or petrochemical industry.</li><li>Completion of Secondary (12 years) education followed by 3 years formal technical training in process plant operations plus relevant short courses in safety, plant operations or equivalent.</li><li>For nationals TAFE or equivalent.</li><li>Good oral and reading and fair in written English.</li></ul>

<p>Operate, control and monitor production stations and equipment to achieve maximum recovery of condensate and NGL products in a safe and efficient manner.</p><p>Control gas recycling plant process parameters from DCS panel and ensure plant operates safely as well as daily operating instructions from Sr Operator and Supervisor on shift.</p><p><strong>Desired Candidate Profile</strong></p><p>Min 6 years in operating process plant in oil and gas or petrochemical industry. Must have 2 years experience as a DCS operator.</p><p>Completion of Secondary education followed by 3 years technical training in process plant operations.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate and adjust production facilities as directed by General Operator/ Senior Operator within designated limits to ensure maximum recovery/injection on assigned shift.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of Secondary (12 years) education followed by 3 years formal technical training in process plant operations plus relevant short courses in safety, plant operations or equivalent. For nationals TAFE or equivalent.</li><li>Minimum 4 years' experience in operating process plant in the oil or petrochemical industry.</li></ul><p></p></section>

<p>QP Refinery is a major contributor and supplier of petroleum products. Operator-I is responsible for safe and efficient field operation. Nature of job is to work in the field that involves activities dealing with hot hydrocarbons, high noise area, toxic gases, high temperatures, and pressures, and sever weather conditions. High level of alertness is required to perform the job. High level of understanding of refinery complexity and Refinery and Chemical Plant technology is required.</p><p>The incumbent is required to work in rotating shifts required to work extended hours as per work requirement.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>7 Years of operations experience in a Refinery / Chemical Plant with 3 years in the specific unit</li><li>TPP or equivalent</li><li>Good working knowledge of relevant process units.</li><li>Good knowledge in basic calculations.</li><li>Good surveillance, vigilance and control in Operations.</li><li>Follows Refinery policies and procedures in line with Company's mission.</li><li>Good working knowledge of English.</li><li>Undergone HSE related trainings.</li></ul>

Heavy Equipment Operator – Qatar ESNAD Transport & Services W. L. L. is looking for experienced and reliable Heavy Equipment Operators to join our team in Qatar. We are seeking operators with hands-on experience operating heavy equipment safely and efficiently across construction, infrastructure, and industrial projects. Key Responsibilities Operate heavy equipment safely and efficiently according to project requirements. Conduct daily pre-operation inspections and report any mechanical or safety issues. Follow site safety procedures, operational instructions, and company policies. Ensure proper handling and operation of equipment to minimize damage and downtime. Maintain the cleanliness and basic condition of the assigned equipment. Coordinate with supervisors and site teams to complete assigned tasks efficiently. Follow all applicable health, safety, and environmental requirements. Requirements Proven experience as a Heavy Equipment Operator. Experience operating relevant equipment such as excavators, wheel loaders, backhoe loaders, and other construction equipment. Good understanding of equipment safety and operating procedures. Ability to work effectively in a team and follow instructions. Reliable, responsible, and safety-conscious. Candidates currently residing in Qatar are preferred. Immediate availability is highly preferred. Qatar/GCC experience is an advantage. What We Offer Long-term employment opportunity. Opportunity to work with an established heavy equipment rental and transportation company in Qatar. Competitive package based on experience and qualifications. Job Details ???? Location: Doha, Qatar ???? Employment Type: Full-time ????️ Work Location: On-site How to Apply If you are currently in Qatar and meet the above requirements, please apply through Linked In and submit your updated CV. Only shortlisted candidates will be contacted.

Job Title: MEP CAD Operator Job Location: Ras Laffan Industry: Oil & Gas Contract: 1 Month Extendable<br>Job Summary:We are looking for an experienced MEP CAD Operator with a minimum of 5 years of relevant experience to prepare, modify, and maintain accurate Mechanical, Electrical, and Plumbing (MEP) drawings for Oil & Gas projects. The role involves producing shop drawings, as-built drawings, and coordination drawings while ensuring compliance with project specifications, industry standards, and client requirements. The ideal candidate should have strong Auto CAD skills and the ability to coordinate effectively with multidisciplinary teams.<br>Mandatory Requirements & Qualifications:Experience:Minimum 5 years of experience as an MEP CAD Operator. Oil & Gas project experience is mandatory. Experience on Qatar Energy, Ras Laffan, or other major Oil & Gas projects is preferred. Education:Diploma or Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Drafting, or a related discipline. Technical Skills:Proficiency in Auto CAD (Mandatory). Experience preparing MEP shop drawings, fabrication drawings, coordination drawings, and as-built drawings. Good knowledge of HVAC, Plumbing, Fire Fighting, and Electrical systems. Understanding of P&IDs, equipment layouts, and utility drawings. Knowledge of Autodesk Navisworks or Revit MEP is an added advantage. Mandatory Criteria:Minimum 5 years of MEP CAD drafting experience. Oil & Gas project experience is mandatory. Strong knowledge of international codes and project standards. Ability to coordinate with Mechanical, Electrical, Civil, and Structural teams. Excellent communication skills and attention to detail.<br>Key Responsibilities:Prepare and update MEP shop drawings, fabrication drawings, coordination drawings, and as-built drawings using Auto CAD. Coordinate with multidisciplinary engineering teams to resolve drawing conflicts and ensure compliance with project specifications and applicable codes. Maintain drawing revisions, document control, material layouts, and provide drafting support throughout project execution.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Operate and adjust production facilities as directed by General Operator/ Senior Operator within designated limits to ensure maximum recovery/injection on assigned shift.&nbsp;</p><br> <br><strong>Required Experience and Skills</strong><br><ul><li>Minimum 4 years’ experience in operating process plant in the oil or petrochemical industry.</li></ul> <br><strong>Educational Qualifications</strong><br><ul><li>Completion of Secondary (12 years) education followed by 3 years formal technical training in process plant operations plus relevant short courses in safety, plant operations or equivalent. For nationals TAFE or equivalent.</li><li>Good oral and reading and fair in written English.</li></ul> </div>

<p>Field Operator - ( 2 ) Position: Field Operator - (2) Date Open: Feb 19, 2026 Closing Date: Jun 30, 2026 Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.<br>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).<br>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.<br>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.<br>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.<br>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.<br>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.<br>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)<br>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.<br>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.<br>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.<br>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.<br>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.<br>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.<br>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.<br>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.<br>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Operate, control and monitor production stations and equipment to achieve maximum recovery of condensate and NGL products in a safe and efficient manner.&nbsp;</p><br><p>Control gas recycling plant process parameters from DCS panel and ensure plant operates safely as well as daily operating instructions from Sr Operator and Supervisor on shift.&nbsp;</p><br> <br><strong>Required Experience and Skills</strong><br><p>Min 6 years in operating process plant in oil and gas or petrochemical industry. Must have 2 years experience as a DCS operator.&nbsp;</p><br> <br><strong>Educational Qualifications</strong><br><p>Completion of Secondary education followed by 3 years technical training in process plant operations.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Requirements</span><ul><li><span>Proven experience operating heavy Forklifts up to 20 Ton capacity<br></span></li><li><span>Port / Logistics / Industrial experience preferred<br></span></li><li><span>Valid Forklift Operator license<br></span></li><li><span>Experience in safe loading, unloading and material handling<br></span></li><li><span>Knowledge of daily equipment inspection and safe operating procedures<br></span></li><li><span>Immediate availability with valid QID<br></span></li></ul><br> </div>

We are looking for an experienced Bending Machine Operator to join our team immediately in Qatar.<br>Position:<br>Bending Machine Operator<br>Requirements:Minimum 2 years of experience operating bending machines. Ability to read and understand technical drawings. Knowledge of machine setup, operation, and quality control. Ready for immediate joining. Preferred Candidates:Free Visa holders, or Candidates with a valid NOC (No Objection Certificate) in Qatar. What We Offer:Attractive Salary (based on experience) Overtime opportunities Career growth in a professional work environment Immediate employment for the right candidate<br>Apply Now!<br>???? Contact: [+97450734455]???? Email: [dhairyashil@alturaindustries.com]???? Location: Qatar

We are looking for an experienced Bending Machine Operator to join our team immediately in Qatar.<br>Position:<br>Bending Machine Operator<br>Requirements:Minimum 2 years of experience operating bending machines. Ability to read and understand technical drawings. Knowledge of machine setup, operation, and quality control. Ready for immediate joining. Preferred Candidates:Free Visa holders, or Candidates with a valid NOC (No Objection Certificate) in Qatar. What We Offer:Attractive Salary (based on experience) Overtime opportunities Career growth in a professional work environment Immediate employment for the right candidate<br>Apply Now!<br>???? Contact: [+97450734455]???? Email: [dhairyashil@alturaindustries.com]???? Location: Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>The Facilities Plant Operator will operate and monitor <strong>electromechanical plant and building systems</strong>, ensuring safe, efficient, and reliable operation across assigned facilities.</p><br><br>Key Responsibilities<ul><li>Operate and monitor mechanical and electromechanical plant.</li><li>Monitor HVAC, air-conditioning, and cooling systems.</li><li>Monitor and operate BMS systems.</li><li>Conduct routine plant inspections and operational checks.</li><li>Identify equipment abnormalities and technical faults.</li><li>Escalate maintenance requirements to technical teams.</li><li>Maintain accurate operational logs and records.</li><li>Coordinate with engineers, supervisors, and technicians.</li></ul>Requirements<ul><li>Technical qualification in <strong>Air Conditioning, Mechanical, or Electromechanical disciplines</strong>.</li><li>Minimum <strong>5 years' relevant experience</strong>.</li><li><strong>3 years' experience as a Plant Operator within schools and kindergartens.</strong></li><li>Strong knowledge of electrical, mechanical, HVAC, and cooling systems.</li><li>Good knowledge of electromechanical operational requirements and <strong>BMS systems</strong>.</li><li>Relevant technical certifications preferred.</li><li>Strong attention to detail.</li><li>Good communication skills.</li><li>English required; Arabic preferred.</li></ul> <br><br> </div>

The Facilities Plant Operator will operate and monitor electromechanical plant and building systems, ensuring safe, efficient, and reliable operation across assigned facilities.<br><br>Key Responsibilities<br><br>Operate and monitor mechanical and electromechanical plant. Monitor HVAC, air-conditioning, and cooling systems. Monitor and operate BMS systems. Conduct routine plant inspections and operational checks. Identify equipment abnormalities and technical faults. Escalate maintenance requirements to technical teams. Maintain accurate operational logs and records. Coordinate with engineers, supervisors, and technicians.<br><br>Requirements<br><br>Technical qualification in Air Conditioning, Mechanical, or Electromechanical disciplines. Minimum 5 years' relevant experience.3 years' experience as a Plant Operator within schools and kindergartens. Strong knowledge of electrical, mechanical, HVAC, and cooling systems. Good knowledge of electromechanical operational requirements and BMS systems. Relevant technical certifications preferred. Strong attention to detail. Good communication skills. English required; Arabic preferred.

Job Title: Auto CAD Operator cum Document Controller (Electrical – LV & MV Switchgear) Job Location: Doha<br>Job Summary:We are seeking an experienced Auto CAD Operator cum Document Controller to support LV & MV Switchgear projects. The successful candidate will be responsible for preparing and revising electrical drawings, maintaining engineering documentation, controlling document revisions, and ensuring timely distribution of technical documents in accordance with project specifications and company standards.<br>Mandatory Requirements & Qualifications:Experience:Minimum 5 years of experience in Electrical Auto CAD drafting and document control. Experience in LV & MV Switchgear projects is highly preferred. Education:Diploma or Bachelor's Degree in Electrical Engineering or a related discipline. Auto CAD Certification (Auto CAD Electrical preferred). Technical Skills:Proficiency in Auto CAD. Experience preparing:Single Line Diagrams (SLD) Wiring Diagrams Schematic & Control Diagrams Panel Layouts Termination Drawings Knowledge of Auto CAD Electrical and EPLAN is an added advantage. Familiarity with document control systems, revision management, and engineering documentation workflows.<br>Mandatory Criteria:Strong understanding of electrical schematics and switchgear drawings. Experience in document numbering, revision control, and document tracking. Excellent organizational, communication, and coordination skills. High attention to detail and ability to meet project deadlines.<br>Key Responsibilities:Prepare, modify, and update electrical drawings including SLDs, wiring diagrams, schematics, control diagrams, panel layouts, and termination drawings. Maintain document control processes, revision registers, drawing logs, and engineering documentation while ensuring proper version control and timely document distribution. Coordinate with engineers, project teams, clients, suppliers, and factories to update drawings, resolve technical queries, prepare as-built drawings, and ensure engineering documentation is completed within project timelines.

Job Title: BMS Operator<br><br>Location: Qatar<br><br>Project: Maintenance<br><br>Vacancies: Not specified<br><br>Experience: Minimum 4 years of relevant BMS experience<br><br>English: Speaking English is mandatory<br><br>???? Job Summary<br><br>We are hiring an experienced BMS Operator for a maintenance project in Qatar. The ideal candidate should have a minimum of 4 years of relevant Building Management System (BMS) experience and good English-speaking skills.<br><br>???? Key Responsibilities<br><br>Operate and monitor Building Management Systems (BMS). Monitor building systems and identify operational issues. Support maintenance teams in resolving BMS-related issues. Monitor system alarms and report abnormalities. Maintain proper operational records and reports. Follow project maintenance procedures and safety requirements.<br><br>???? Candidate Requirements<br><br>Minimum 4 years of relevant BMS experience. Practical experience in Building Management Systems. English speaking is mandatory. Relevant maintenance-project experience will be applicable.<br><br>???? Salary & Benefits Candidate Experience Salary???????? Indian Experience QAR 1,600 + FAT???? GCC Experience QAR 1,800 + FAT<br><br>Terms & Conditions<br><br>⏰ Duty: 9 Hours????️ Food Provided???? Accommodation Provided???? Transportation Provided???? Employment Visa by Company<br><br>???? How to Apply<br><br>Interested and eligible candidates should share their updated CV for screening and further processing.<br><br>Keywords: BMS Operator, Building Management System Operator, BMS Technician, BMS Maintenance, Building Automation, Facilities Management, Maintenance Project, BMS Jobs Qatar, Maintenance Jobs Qatar, Facility Management Jobs Qatar.<br><br>Skills: bms,building management systems,building management,automation,building,building automation,maintenance

Job Title: BMS Operator<br><br>Location: Qatar<br><br>Project: Maintenance<br><br>Vacancies: Not specified<br><br>Experience: Minimum 4 years of relevant BMS experience<br><br>English: Speaking English is mandatory<br><br>???? Job Summary<br><br>We are hiring an experienced BMS Operator for a maintenance project in Qatar. The ideal candidate should have a minimum of 4 years of relevant Building Management System (BMS) experience and good English-speaking skills.<br><br>???? Key Responsibilities<br><br>Operate and monitor Building Management Systems (BMS). Monitor building systems and identify operational issues. Support maintenance teams in resolving BMS-related issues. Monitor system alarms and report abnormalities. Maintain proper operational records and reports. Follow project maintenance procedures and safety requirements.<br><br>???? Candidate Requirements<br><br>Minimum 4 years of relevant BMS experience. Practical experience in Building Management Systems. English speaking is mandatory. Relevant maintenance-project experience will be applicable.<br><br>???? Salary & Benefits Candidate Experience Salary???????? Indian Experience QAR 1,600 + FAT???? GCC Experience QAR 1,800 + FAT<br><br>Terms & Conditions<br><br>⏰ Duty: 9 Hours????️ Food Provided???? Accommodation Provided???? Transportation Provided???? Employment Visa by Company<br><br>???? How to Apply<br><br>Interested and eligible candidates should share their updated CV for screening and further processing.<br><br>Keywords: BMS Operator, Building Management System Operator, BMS Technician, BMS Maintenance, Building Automation, Facilities Management, Maintenance Project, BMS Jobs Qatar, Maintenance Jobs Qatar, Facility Management Jobs Qatar.<br><br>Skills: bms,building management systems,building management,automation,building,building automation,maintenance

Job Title: BMS Operator<br><br>Location: Qatar<br><br>Project: Maintenance<br><br>Vacancies: Not specified<br><br>Experience: Minimum 4 years of relevant BMS experience<br><br>English: Speaking English is mandatory<br><br>???? Job Summary<br><br>We are hiring an experienced BMS Operator for a maintenance project in Qatar. The ideal candidate should have a minimum of 4 years of relevant Building Management System (BMS) experience and good English-speaking skills.<br><br>???? Key Responsibilities<br><br>Operate and monitor Building Management Systems (BMS). Monitor building systems and identify operational issues. Support maintenance teams in resolving BMS-related issues. Monitor system alarms and report abnormalities. Maintain proper operational records and reports. Follow project maintenance procedures and safety requirements.<br><br>???? Candidate Requirements<br><br>Minimum 4 years of relevant BMS experience. Practical experience in Building Management Systems. English speaking is mandatory. Relevant maintenance-project experience will be applicable.<br><br>???? Salary & Benefits Candidate Experience Salary???????? Indian Experience QAR 1,600 + FAT???? GCC Experience QAR 1,800 + FAT<br><br>Terms & Conditions<br><br>⏰ Duty: 9 Hours????️ Food Provided???? Accommodation Provided???? Transportation Provided???? Employment Visa by Company<br><br>???? How to Apply<br><br>Interested and eligible candidates should share their updated CV for screening and further processing.<br><br>Keywords: BMS Operator, Building Management System Operator, BMS Technician, BMS Maintenance, Building Automation, Facilities Management, Maintenance Project, BMS Jobs Qatar, Maintenance Jobs Qatar, Facility Management Jobs Qatar.<br><br>Skills: bms,building management systems,building management,automation,building,building automation,maintenance