Refrigeration And Air Conditioning Engineer Jobs in Qatar

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

Reports To: Operations Engineering Manager Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions This position will prepare cost estimates for bidding multimillion dollar worth Oil and Gas Projects.<br>Tasks and Responsibilities Review customer/Bid tender package to fully understand SWO, specifications and schedule. Raises clarifications where necessary. Reviews and understands contract price form, clarifies unit rate and lump sum breakdown. Understands planned bid strategy, build sequences and methods to execute the scope of work from operations engineer. Issues technical execution plan. Request and Coordinates inputs from Operations / Production / Shop Engineers, Yard Superintendents, Planning, Welding Engineers, QA/QC, Construction Support Engineering, Procurement. Checks if any new equipment Is required to execute work. Obtains cost by liaising with Procurement. Prepares RFQ for scope that cannot be executed inhouse and issues to Procurement to obtain subcontractor quotes. Performs RFQ Bid Evaluations and selects subcontractor with competitive pricing. Performs quantity take-offs, determines workforce, rental equipment, and material cost. Prepares detailed estimates in accordance with the scope of work based on standard rates, historical performance or first principle. Compiles the overall estimates. Conducts reviews with management to finalize estimates. Ensure Bid estimates are fully approved and signed off by all. Records all basis of Bid estimate in a formal document. Records all communication, assumptions done at Bid in a manner that same can be easily referred during later date (at execution). Maintains historical records of estimates. Compiles actual performance of repeated works performed in yard and works out benchmarks to be considered for bidding purpose. Compares actuals to estimates and understands reasons for variance. Recommends benchmarks revision where necessary. Takes lead on new initiatives, developments, and suggestions from management to improve.<br>Qualifications, Experience and Skills Qualifications:Diploma or Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 5+ Years in offshore construction involving structures like jackets, topsides, bridges. Understand components, construction methods and processes.<br>Skills: Ability to read Engineering Drawings. Excellent written and spoken communication skills. Well versed in working with Microsoft Office, Power Point, Excel, PDF, and computer applications. Ability to meet challenging deadlines and manage changes (internally or externally imposed).

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

Responsible for driving business growth within Qatar’s Oil, Gas & LNG, Petrochemical, and other Industrial sectors for the AMPIS division. The role focuses on proactive business development, client engagement, and techno-commercial support across tendering and contract phases, requiring strong knowledge of Qatar Energy standards, EPC processes, and project-based sales cycles.<br><br>A key aspect of this role includes driving business development activities related to AMPIS’s representation of Yokohama Rubber Co. (Marine Hoses Division), ensuring effective coordination, promotion, and conversion of high-value RFQs and tenders originating from this principal.<br><br>Key Responsibilities<br><br>Identify and perform key functions contributing to business growth and revenue generation:Identify and develop new business opportunities with Qatar Energy, Qatar Energy LNG, major EPC contractors, and key Oil & Gas operators in Qatar. Establish and maintain strong relationships with consultants, procurement teams, project managers, and key decision-makers. Review RFQs, ITTs, and tender documents, and prepare comprehensive techno-commercial proposals. Coordinate with principals, manufacturers, and internal teams to ensure full technical and commercial compliance. Act as the focal point for all business development activities related to Yokohama Rubber Co., including RFQ management, client engagement, technical coordination, and conversion of strategic marine hose opportunities. Ensure adherence to Qatar Energy project-specific standards. Attend pre-bid meetings, clarification meetings, and technical discussions with clients. Support commercial negotiations and contract finalization in coordination with management. Monitor upcoming projects and maintain a robust and active opportunity pipeline. Achieve assigned sales targets and revenue objectives. Prepare periodic sales reports, forecasts, and market intelligence updates. Participate in industry exhibitions and events to support business development initiatives. Maintain continuous engagement with key clients and principals.<br><br>Key Performance Indicators (KPIs)<br><br>Annual revenue growth achievement Tender win ratio Client acquisition and retention rate Gross margin achievement Expansion of approved vendor registrations in Qatar for AMPIS and Principals. Conversion rate and revenue contribution from Yokohama Rubber Co. (Marine Hoses Division) opportunities. Business Development & Market Expansion<br><br>Identify And Pursue New Business Opportunities Within<br><br>Energy Sector (Oil & Gas, LNG, Petrochemical) International Oil & Gas companies operating in Qatar Qatar-based EPIC contractors Industrial and infrastructure sectors Ministries and government entities<br><br>Develop and implement business development plans aligned with AMPIS revenue and Gross Profit targets.<br><br>Promote AMPIS represented principals and product lines through client meetings, presentations, and technical engagement.<br><br>Maintain a strong opportunity pipeline and provide periodic forecasts to management.<br><br>Qatar Market Intelligence & Client Engagement<br><br>Build And Maintain Strategic Relationships With<br><br>Major energy operators and subsidiaries International operators and service companies EPC contractors and subcontractors Industrial clients and public sector entities<br><br>Leverage market intelligence to position AMPIS early in project cycles and vendor approval stages. Track market trends, competitor activities, and procurement strategies.<br><br>Commercial & Tender Coordination Monitor and evaluate relevant tender opportunities aligned with AMPIS scope. Coordinate internally for the preparation of competitive and compliant bids. Support tender submissions, technical clarifications, commercial negotiations, and contract finalization. Ensure all proposals meet approved Gross Profit targets and margin requirements. Principal & OEM Coordination Act as the commercial focal point between AMPIS and international principals, with particular focus on Yokohama Rubber Co. Manage and coordinate all RFQs, tenders, and technical/commercial discussions related to Yokohama marine hose systems, ensuring timely response and alignment for high-value and strategic opportunities. Coordinate technical and commercial inputs for proposal development. Identify and onboard new principles aligned with market demand. Market Intelligence, Governance & Reporting<br><br>Submit Periodic Reports On<br><br>Opportunity pipeline Gross Profit forecast Client engagement status Market observations and competitive analysis<br><br>Maintain compliance with company policies, governance standards, and confidentiality requirements.<br><br>Perform other duties assigned by the AMPIS Manager, BDM, MD / FD within the scope of the role.<br><br>Authority & Accountability<br><br>Authorized to represent AMPIS in client meetings and commercial discussions (as delegated).<br><br>Accountable For<br><br>Development and management of opportunity pipeline Strength and continuity of client relationships Achievement of revenue and Gross Profit targets Compliance with approved margin requirements. Effective management and conversion of all Yokohama-related Tenders/RFQs and strategic opportunities. Responsible for maintaining confidentiality of all commercial and client-related information. Training & Development<br><br>Attend relevant training programs, seminars, and industry events to enhance technical and commercial competencies in line with AMPIS business activities.<br><br>Qualifications & Experience<br><br>Educational Qualification: Bachelor’s degree in Mechanical, Chemical, Electrical, Instrumentation or Industrial Engineering field. Professional Experiences:Minimum 7 to 10 years of proven experience in Business Development or Technical Sales within Qatar Oil & Gas sector. Strong knowledge of Qatar Energy (and its affiliates) vendor registration and tendering procedures. Experience dealing with major EPC contractors operating in Qatar. Strong knowledge of Oil & Gas equipment, Piping systems, valves, compressors, pumps etc Proven track record of achieving sales targets in Qatar market. Proven experience in Energy sector marketing and client engagement. Established professional network within:Major energy operators International oil & gas companies EPC contractors Industrial and government entities Experience in marine hose systems, offshore loading systems, or working with international OEMs such as Yokohama Rubber Co. is highly preferred.<br><br>Licenses/Certifications:Valid Qatar Driving License. Valid Engineering Certification in Mechanical, Industrial, Electrical / Instrumentation or Chemical Engineering. Competencies:Strong negotiation and commercial acumen. Techno-commercial evaluation skills. Excellent communication and presentation skills. Market intelligence and project tracking capability. Customer/Client relationship management capability. Strategic planning, presentation and analytical skills. Strong understanding of Qatar energy and industrial market landscape. Knowledge of EPC project lifecycle and procurement processes. Familiarity with tendering procedures of major Qatar clients. Commercial acumen with focus on Gross Profit and margin optimization. Market intelligence analyzation and reporting skills. Excellent written and verbal communication. Ability to coordinate effectively with cross-functional teams. Professional integrity and business ethics. Language: English (Arabic advantage).

Job Summary<br><br>The Senior QA/QC Engineer is responsible for leading and overseeing Quality Assurance and Quality Control activities across the fertilizer complex to ensure that plant assets, materials, equipment, and construction activities comply with applicable international standards, company specifications, and regulatory requirements throughout their lifecycle. The role provides technical assurance for procurement, fabrication, welding, construction, inspection, testing, and material quality, while promoting a proactive "Quality at Source" culture to enhance asset reliability, mechanical integrity, and process safety.<br><br>The position also maintains compliance with ISO/IEC 17020 requirements by implementing and continually improving the Inspection Body Management System, supporting accreditation, and ensuring effective quality management practices across the Asset Integrity function.<br><br>Key Accountabilities<br><br>Lead and manage Quality Assurance and Quality Control (QA/QC) activities across all QAFCO plants and facilities to ensure compliance with company specifications, international standards, and statutory requirements. Ensure quality assurance throughout the asset lifecycle by participating in vendor qualification, reviewing Inspection and Test Plans (ITPs), quality documentation, manufacturing procedures, and witnessing shop and site inspections. Manage the qualification of vendors in co-operation with different stake holders like Material management , Mechanical, Electrical , Instrumentation sections etc. Oversee QA/QC activities for fabrication, construction, installation, repairs, and maintenance of static equipment and piping, ensuring compliance with approved procedures, codes, standards, and contractual requirements. Manage welding quality assurance by verifying Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), welder qualifications, and non-destructive examination (NDE) requirements for fabrication and repair activities. Review and approve welding book submitted by contractors. Coordinate and perform inspections with third-party inspection agencies, contractors, and vendors, including factory acceptance tests (FAT), site inspections according to ITP steps and lifting equipment certification. Ensure effective quality control of incoming materials, equipment, and spare parts by reviewing material certificates, verifying compliance with specifications, maintaining material traceability, and reporting non-conformities. Expertise needed to take decisions, if any deviations from the specification and Mock test requirement, etc. Monitor the repair and integrity of pressure equipment, piping, and static equipment in accordance with applicable codes and standards, including ASME PCC-2, to restore and maintain mechanical integrity. Manage inspection, testing, certification, and performance evaluation of pressure relief devices, and develop optimized inspection scopes using Risk-Based Inspection (RBI) methodologies. Maintain compliance with statutory and regulatory requirements, including Radiation Protection licensing and other applicable Ministry requirements. Maintain, calibrate, and control inspection instruments, tools, and equipment to ensure their accuracy, availability, and compliance with quality requirements. Develop, maintain, and continuously improve QA/QC procedures, inspection documentation, records, and electronic management systems to support effective asset integrity management. Implement, maintain, and continuously improve the ISO/IEC 17020 Inspection Body Management System, support accreditation activities, conduct internal audits, and ensure effective implementation of all applicable ISO/IEC 17020 requirements. Collaborate with Operations, Maintenance, Projects, Procurement, Supply Chain, and Asset Integrity teams to promote a "Quality at Source" culture, enhance process safety and mechanical integrity, and drive continuous improvement initiatives. Provide technical expertise in materials engineering, selection, corrosion, welding, inspection techniques, and damage mechanisms, while supporting engineering studies, troubleshooting, and quality improvement initiatives. Shall be able to review metallography and preparation of replica. Participate in Root Cause Analysis for the failures. Train, mentor, and develop inspection personnel and trainees through on-the-job coaching, knowledge sharing, and technical guidance to strengthen organizational competency. Ensure full compliance with QAFCO Occupational Health, Safety, Environment and Quality (OHSEQ) requirements, company policies, and all applicable regulatory and process safety standards.<br><br>Desired Candidate Profile<br><br>Bachelor’s degree in engineering in Mechanical/Metallurgy, graduated from a recognized university. Minimum of 10 - 15 years’ relevant functional experience within the Fertilizer, Petrochemicals or Oil & Gas Industry. Possess relevant professional certification such as ASME Authorized inspector Welding Inspection Cert. (CSWIP 3.2, AWS, or equivalent), etc. API 510, 570, API 653, API580 Inservice

Primary Purpose Of The Job<br><br>Function as a Senior Civil/Structural Engineer for a Power and Desalination Plant project, providing technical assurance over the Contractor’s civil and structural design from commencement through completion. The role requires independent technical capability to manage, review, verify and approve all civil and structural engineering deliverables associated with a power generation and desalination facility, including complex onshore and marine infrastructure.<br><br>The Senior Civil/Structural Engineer shall ensure suitability of civil and structural designs for site development, dynamic equipment foundations, very large prestressed potable water retaining structures, large‑scale drainage and earthworks, switching stations and electrical yards. Detailed design knowledge of the abovementioned facilities is required, including the ability to develop scopes of work and provide technical assurance for engineered elements.<br><br>Required Experience And Skills<br><br>Minimum 15 years of relevant post‑graduate experience, of which at least 10 years shall be related to power plant, oil & gas, or other heavy industrial projects. Experience in plant site development, including roads, earthworks, complex drainage systems, utility‑scale power plants, including heavy turbines and generator foundations associated with major industrial facilities. Design experience in large prestressed potable water retaining structures, and large seawater tanks and settlement basins. Design experience in nearshore and marine civil infrastructure, including seawater intake and brine discharge systems, nearshore civil works, and coastal protection infrastructure. Experience developing scope of work for geotechnical and Topographical investigation and interpreting outcome reports. Experience providing technical support during construction phase of mega‑projects, including resolution of complex civil and structural engineering issues during execution. Experience across Concept / Feasibility, FEED, and EPIC phases. Familiarity with US and European civil/structural codes and standards. Strong technical capability, with the ability to resolve complex engineering issues independently and without reliance on third‑party intervention. Proven ability to manage time, cost and quality in engineering projects within a multiple project environment. Excellent communications and presentation skills with fluency in English. Proven experience working in multicultural teams.<br><br>Educational Qualifications<br><br>Bachelor’s degree in civil or Structural Discipline Engineering Chartered Engineer status or a postgraduate degree in a relevant field.

Primary Purpose Of The Job<br><br>Undertake Reservoir Engineering studies of the Qatar Energy operated offshore Idd El-Shargi field to optimize field development plans as well as analyze reservoir and well performance data, decline curve analysis, pressure transient analysis and material balance. Prepare reservoir surveillance programs and conduct reservoir management activities. Prepare detailed/integrated development plans for underdeveloped hydrocarbon resources and participate in interdisciplinary reservoir study teams.<br><br>Principal Accountabilities<br><br>Perform advanced horizontal wells PTA interpretation such as deconvolution, multi-layer reservoirs and double porosity systems, using noisy and incomplete buildup and falloff data sets. Construct/update dynamic black oil and compositional reservoir models for field development planning. Perform the annual reserves review and generate long term production/injection forecasts for business planning and drilling/workover schedule. Contribute and integrate reservoir engineering inputs into the short term (drill/replacement well projects, workover projects and drilling/workover operations), medium term (reservoir voidage management) and long term (field development and asset value optimization) activities. Identify target reservoir(s) layers and determine well-reservoir contacts for new/replacement vertical/deviated/horizontal drilling projects into multi-layered heterogeneous reservoirs to optimize field development. Contribute to the well proposals/prognosis. Develop and prepare post-drill reservoir engineering reports including integration of interpreted reservoir engineering data with Geological & Petrophysical evaluations. Participate in preparing detailed integrated development plans for undeveloped hydrocarbon resources. Contribute to the reservoir engineering domain, to the fields' annual reviews. Recommend the acquisition of reservoir engineering data and maintain reservoir engineering databases including real time data links. Monitor work compliance by contractors for reservoir engineering data acquisition. Provide on-the-job training, coaching and development of Qatari staff.<br><br>Required Experience And Skills<br><br>Context / Special Features / Challenges<br><br>Minimum of 20 years work experience in reservoir engineering activities. Advanced knowledge of horizontal wells PTA interpretation such as deconvolution, multi-layer reservoirs and double porosity/permeability systems. Strong competency in constructing numerical reservoir simulation models (black-oil and compositional), model initialization, history matching, running sensitivities and predictions. Strong competency in transient well test design and interpretation, material balance modelling and performance prediction. Must have experience in mature carbonate fields. Strong competency in PVT, SCAL data analysis. Must be familiar with reserves evaluation, classification and booking (SPE PRMS or SEC standards). Must be able to communicate effectively with peers, less experienced staff, field staff and management. Must have strong teamwork skills. Experience working in a multicultural and integrated environment is a plus. Must be fluent in spoken and written English. Advanced Degree in Engineering (preferably Petroleum Engineering) or Applied Sciences Experience working on mature oil/gas fields. Desirable to have experience in reservoir fluid sampling, fluid property modelling, routine, and special core analysis. Desirable to have knowledge of uncertainty analysis and risk assessment / management.<br><br>Educational Qualifications<br><br>Minimum of a BSc in Engineering (preferably Petroleum Engineering) or Applied Sciences Well test interpretation with Kappa-Saphir Simulation Eclipse 100/300Petrel REFluid property modelling PVTi, PVTSim Material balance - MBALReservoir surveillance- OFM@Risk/Crystal Ball

Primary Purpose Of The Job<br><br>Function as a Senior Civil/Structural Engineer for a Power and Desalination Plant project, providing technical assurance over the Contractor’s civil and structural design from commencement through completion. The role requires independent technical capability to manage, review, verify and approve all civil and structural engineering deliverables associated with a power generation and desalination facility, including complex onshore and marine infrastructure.<br><br>The Senior Civil/Structural Engineer shall ensure suitability of civil and structural designs for site development, dynamic equipment foundations, very large prestressed potable water retaining structures, large‑scale drainage and earthworks, switching stations and electrical yards. Detailed design knowledge of the abovementioned facilities is required, including the ability to develop scopes of work and provide technical assurance for engineered elements.<br><br>Required Experience And Skills<br><br>Minimum 15 years of relevant post‑graduate experience, of which at least 10 years shall be related to power plant, oil & gas, or other heavy industrial projects. Experience in plant site development, including roads, earthworks, complex drainage systems, utility‑scale power plants, including heavy turbines and generator foundations associated with major industrial facilities. Design experience in large prestressed potable water retaining structures, and large seawater tanks and settlement basins. Design experience in nearshore and marine civil infrastructure, including seawater intake and brine discharge systems, nearshore civil works, and coastal protection infrastructure. Experience developing scope of work for geotechnical and Topographical investigation and interpreting outcome reports. Experience providing technical support during construction phase of mega‑projects, including resolution of complex civil and structural engineering issues during execution. Experience across Concept / Feasibility, FEED, and EPIC phases. Familiarity with US and European civil/structural codes and standards. Strong technical capability, with the ability to resolve complex engineering issues independently and without reliance on third‑party intervention. Proven ability to manage time, cost and quality in engineering projects within a multiple project environment. Excellent communications and presentation skills with fluency in English. Proven experience working in multicultural teams.<br><br>Educational Qualifications<br><br>Bachelor’s degree in civil or Structural Discipline Engineering Chartered Engineer status or a postgraduate degree in a relevant field.

Job Description<br><br>Wood has an opportunity for a Principal Civil & Structural Engineer to join our team in Qatar on a long-term basis. This is a key role within the Wood Doha office delivering across Concept study, FEED, EPC and PMC scopes of work.<br><br>Responsibilities<br><br>The Principal Civil & Structural Engineer will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets.<br><br>Designing the future. Transforming the world<br><br>Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In<br><br>Onshore Oil and Gas<br><br>Offshore Oil and Gas<br><br>What We Can Offer<br><br> Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Life Insurance; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death End of Service Gratuity; In line with Qatar Labor Law, upon completion of 1 years’ service employees are eligible for an End of Service benefit of three weeks for every year of service. Medical Insurance: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being. Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence. Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession <br><br>Typical Responsibilities<br><br> Produce, review, and take responsibility for the accuracy of detailed calculations, Civil engineering datasheets and drawings to specify the Civil engineering requirements of our projects Having sound experience in the design and analysis of new and existing buildings, structures, foundations, infrastructure and civil works including drainage design, roads and pavement design commonly found in oil & gas facilities. Having good experience in the design of both concrete and steel structures including piperacks, buildings, technological structures, equipment supporting structures, pipe bridges, pipe supports, pipe sleepers, etc. Having good experience in the design and checking of different types of foundations such as isolated, combined, raft etc including dynamic foundations, equipment foundations, compressor foundations, pump foundations, underground pits/structures, etc. Having good experience both working and checking level for the adequacy checks for the existing structures and foundations including piperacks, buildings, pipe bridges, technological structures, equipment foundations, etc. Must have executed recent projects in Intergraph Smart Plant 3D modeling environment Supervise less experienced civil engineers and, where required, be line manager for civil engineers within Qatar office. As required, perform the role of Lead Engineer including estimating and planning work as well as progress reporting. Support recruitment, training, and development of civil personnel Follow company standards and procedures to schedule and budget as advised by the Lead civil Engineer Remain up to date with the latest technical developments in your fields of expertise Demonstrate, provide and develop appropriate technical solutions for specific project issues Ensure the delivery of challenging project and client targets using sound technical knowledge and decision-making skills Familiarity with engineering software such as STAAD-Pro, Foundation 3D, Mat 3D, etc. - both as a user and checker. Take a proactive approach to personal & professional development Ensure Wood and Client Health, Safety, Environmental and Quality procedures are followed and that a high standard of safety is achieved in all associated work Demonstrate appreciation of commercial and technical risks, managing these appropriately within own work and highlighting any significant issues to Lead Civil Engineer/ Engineering Manager. Seek and support opportunities for department and project improvement and contribute to developing solutions <br><br>Qualifications<br><br>What makes you remarkable? <br><br>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br>Qualifications<br><br> Degree in Civil Engineering or Similar with a minimum of 15 years of relevant experience Enrolled on the Register of Engineers in the State of Qatar, Grade A Category as a mandatory requirement If not enrolled on the Register of Engineers in the State of Qatar, then candidates must be a Chartered Engineer Proven core Civil Engineering skills, including design experience and preferably in the Oil & Gas sector Experience of working in a variety of Onshore projects and phases, including greenfield and brownfield, Pre-FEED through to EPC A self-motivated, proactive individual with high achievement drive and initiative, excellent verbal and written communication skills and good organizational awareness Ability to impact and influence fellow workers Demonstration of customer focus and ability to respond to customer needs whilst achieving project and corporate objectives Display analytical and innovation skills to manage new technology <br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

The QAQC Engineer is responsible for establishing, implementing, and maintaining quality assurance and quality control systems across all carpentry, joinery, and fit-out manufacturing activities. The role ensures that all products, materials, and workmanship comply with approved drawings, specifications, client requirements, applicable standards, and company quality procedures.<br><br>Key Responsibilities<br><br> Quality Assurance (QA) Responsibilities Develop, implement, and maintain Quality Management Systems (QMS) in line with ISO 9001:2015 or company standards. Prepare and update Quality Plans, Method Statements, Inspection and Test Plans (ITPs) for joinery and fit-out works. Ensure QA procedures cover all stages of manufacturing, including material procurement, fabrication, finishing, packing, and delivery. Coordinate internal audits and assist during external audits by clients, consultants, or certification bodies. Review project specifications, drawings, BOQs, and client requirements to identify quality requirements and risks. Establish quality objectives and monitor performance through KPIs and quality reports. Promote a quality-driven culture across production and project teams. Quality Control (QC) Responsibilities Conduct incoming material inspections for timber, boards, veneers, laminates, hardware, finishes, adhesives, and accessories. Verify compliance of materials with approved submittals, samples, and technical data sheets. Perform in-process inspections during cutting, machining, assembly, veneering, laminating, finishing, polishing, and pre-installation mock-ups. Inspect final products to ensure compliance with approved shop drawings, samples, tolerances, and finish quality. Monitor workmanship quality for factory-made and site-installed joinery and fit-out items. Ensure proper calibration and use of measuring and inspection tools. Identify non-conformities and issue NCRs (Non-Conformance Reports) where required. Follow up on corrective and preventive actions (CAPA) and verify their effectiveness. Project & Site Coordination Liaise with Project Managers, Production Managers, Factory Supervisors, and Site Engineers on quality matters. Coordinate inspections with consultants, clients, and third-party inspectors. Support factory acceptance tests (FAT) and site inspections prior to delivery or installation. Ensure quality compliance during site installation, rectification works, and snag clearance. Assist in preparation of handover documents, warranties, and quality dossiers when required. Documentation & Reporting Maintain accurate records of inspections, test results, approvals, NCRs, and corrective actions. Prepare Inspection Requests (IRs) and ensure timely approvals. Compile quality reports, dashboards, and monthly summaries for management review. Control quality-related documents and ensure only approved revisions are in use. Maintain records for traceability of materials and workmanship. Compliance & Standards Ensure compliance with relevant standards (e.g., ISO 9001, ASTM, BS, EN, local authority requirements). Ensure products meet fire rating, environmental, sustainability, and safety requirements where applicable. Monitor compliance with health, safety, and environmental requirements related to materials and finishes (e.g., VOC, fire-retardant treatments). Continuous Improvement Analyze recurring defects and quality issues to identify root causes. Propose improvements to manufacturing processes, materials, and inspection methods. Support training of production and site teams on quality requirements, workmanship standards, and best practices. Participate in lessons-learned sessions after project completion.<br><br>Qualifications & Experience<br><br>Education<br><br>Bachelor’s Degree or Diploma in Civil Engineering, Wood Technology, Industrial Engineering, or related field.<br><br>Experience<br><br>Minimum 7–10 years of experience in QAQC within carpentry, joinery, or fit-out manufacturing. Proven experience in factory and site quality control for bespoke joinery and interior fit-out projects.<br><br>Skills & Competencies<br><br>Strong knowledge of carpentry, joinery materials, finishes, and fabrication processes. Ability to read and interpret shop drawings, details, specifications, and BOQs. Familiarity with ISO 9001 and quality auditing principles. Attention to detail and strong analytical skills. Excellent documentation and report-writing skills. Good communication and coordination skills with multidisciplinary teams. Proficient in MS Office and basic quality management software/tools.<br><br>Working Conditions<br><br>Based in manufacturing facility with regular visits to project sites. May require overtime or extended hours during project deadlines. Exposure to factory environments, woodworking machinery, and construction sites.

The QAQC Engineer is responsible for establishing, implementing, and maintaining quality assurance and quality control systems across all carpentry, joinery, and fit-out manufacturing activities. The role ensures that all products, materials, and workmanship comply with approved drawings, specifications, client requirements, applicable standards, and company quality procedures.<br><br>Key Responsibilities<br><br> Quality Assurance (QA) Responsibilities Develop, implement, and maintain Quality Management Systems (QMS) in line with ISO 9001:2015 or company standards. Prepare and update Quality Plans, Method Statements, Inspection and Test Plans (ITPs) for joinery and fit-out works. Ensure QA procedures cover all stages of manufacturing, including material procurement, fabrication, finishing, packing, and delivery. Coordinate internal audits and assist during external audits by clients, consultants, or certification bodies. Review project specifications, drawings, BOQs, and client requirements to identify quality requirements and risks. Establish quality objectives and monitor performance through KPIs and quality reports. Promote a quality-driven culture across production and project teams. Quality Control (QC) Responsibilities Conduct incoming material inspections for timber, boards, veneers, laminates, hardware, finishes, adhesives, and accessories. Verify compliance of materials with approved submittals, samples, and technical data sheets. Perform in-process inspections during cutting, machining, assembly, veneering, laminating, finishing, polishing, and pre-installation mock-ups. Inspect final products to ensure compliance with approved shop drawings, samples, tolerances, and finish quality. Monitor workmanship quality for factory-made and site-installed joinery and fit-out items. Ensure proper calibration and use of measuring and inspection tools. Identify non-conformities and issue NCRs (Non-Conformance Reports) where required. Follow up on corrective and preventive actions (CAPA) and verify their effectiveness. Project & Site Coordination Liaise with Project Managers, Production Managers, Factory Supervisors, and Site Engineers on quality matters. Coordinate inspections with consultants, clients, and third-party inspectors. Support factory acceptance tests (FAT) and site inspections prior to delivery or installation. Ensure quality compliance during site installation, rectification works, and snag clearance. Assist in preparation of handover documents, warranties, and quality dossiers when required. Documentation & Reporting Maintain accurate records of inspections, test results, approvals, NCRs, and corrective actions. Prepare Inspection Requests (IRs) and ensure timely approvals. Compile quality reports, dashboards, and monthly summaries for management review. Control quality-related documents and ensure only approved revisions are in use. Maintain records for traceability of materials and workmanship. Compliance & Standards Ensure compliance with relevant standards (e.g., ISO 9001, ASTM, BS, EN, local authority requirements). Ensure products meet fire rating, environmental, sustainability, and safety requirements where applicable. Monitor compliance with health, safety, and environmental requirements related to materials and finishes (e.g., VOC, fire-retardant treatments). Continuous Improvement Analyze recurring defects and quality issues to identify root causes. Propose improvements to manufacturing processes, materials, and inspection methods. Support training of production and site teams on quality requirements, workmanship standards, and best practices. Participate in lessons-learned sessions after project completion.<br><br>Qualifications & Experience<br><br>Education<br><br>Bachelor’s Degree or Diploma in Civil Engineering, Wood Technology, Industrial Engineering, or related field.<br><br>Experience<br><br>Minimum 7–10 years of experience in QAQC within carpentry, joinery, or fit-out manufacturing. Proven experience in factory and site quality control for bespoke joinery and interior fit-out projects.<br><br>Skills & Competencies<br><br>Strong knowledge of carpentry, joinery materials, finishes, and fabrication processes. Ability to read and interpret shop drawings, details, specifications, and BOQs. Familiarity with ISO 9001 and quality auditing principles. Attention to detail and strong analytical skills. Excellent documentation and report-writing skills. Good communication and coordination skills with multidisciplinary teams. Proficient in MS Office and basic quality management software/tools.<br><br>Working Conditions<br><br>Based in manufacturing facility with regular visits to project sites. May require overtime or extended hours during project deadlines. Exposure to factory environments, woodworking machinery, and construction sites.

Greetings from Linnk Group<br>Job Summary We are seeking a proactive Onsite IT Support Engineer to deliver high-quality Level 1 and Level 2 technical support within an executive office environment. The role involves supporting end-users, including senior leadership, ensuring smooth operation of workplace technology, and providing both onsite and remote support across international offices.<br>Job Title: Onsite IT Support Engineer – Executive Support (L1/L2) Location: Doha, Qatar Contract: Yearly Renewable<br>Key Responsibilities Provide hands-on support for Windows, mac OS, Microsoft 365, and mobile devices (i OS/Android). Troubleshoot issues related to Outlook, Teams, One Drive, Share Point, authentication, and MFA. Deliver proactive floor-walking support for meeting rooms, Teams Rooms, video conferencing, printers, and WiFi. Support users remotely across global offices. Assist with Microsoft 365 administration, including Entra ID (Azure AD), Intune, and licensing. Perform basic network troubleshooting (WiFi, VLAN, DHCP, DNS) and escalate when required. Manage device lifecycle activities such as provisioning, software installation, and replacements.<br>Technical Requirements3–5 years of experience in IT support or system administration. Strong knowledge of Microsoft 365, Entra ID (Azure AD), and Microsoft Intune. Experience with Windows 10/11, mac OS, and mobile device support. Good understanding of networking fundamentals (WiFi, VLAN, DHCP, DNS).<br>Certifications (Preferred) Microsoft MD-102 (Endpoint Administrator) Microsoft MS-102 (Microsoft 365 Administrator) Microsoft MS-900 (Microsoft 365 Fundamentals)<br>If you're ready to make a difference and contribute your expertise to our team, we want to hear from you! Please send your updated resume and the following details to Mohammed. Sabah@linnk.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Responsible for pre-commissioning, commissioning, and start-up of facilities in projects in accordance with procedures and guidelines in place.</li> <li>To define, mobilize and manage an organization which will cover the preparation and the execution of commissioning.</li> </ul><br><ul> <li>To manage the preparation of project specific pre-commissioning /commissioning procedures and reporting tools (including technical database when applicable, planning, punch list control).</li> <li>To manage the execution of commissioning to achieve maximum productivity, minimize cost and achieve smooth hand over.</li> <li>To supervise the reporting of commissioning execution to ensure that all technical, and contractual information is properly recorded, collected and available for inspection/reference as required by regulations and procedures/policies.</li> <li>To supervise the schedule of commissioning in order to reach the planned end date.</li> <li>To co-ordinate with other project entities/existing facilities.</li> <li>To ensure the project commissioning and handover process is implemented in compliance with procedures and guidelines.</li> <li>To promote HSE behaviour within the commissioning activities and verify that HSE procedures are implemented by commissioning team.</li> <li>To review and provide input to project scope of work.</li> <li>Improve commissioning procedures, initiate and contribute to the commissioning deliverables standardization, develop strategy to minimize offshore commissioning and minimize lost time due to interfaces.</li> <li>Develop commissioning strategy and provide input to the project execution plan and early stages of engineering.</li> <li>Responsible for the review and the approval of the various commissioning preparation tasks to be performed by the Contractor: work breakdown structure, priorities, resources, schedule, etc.</li> <li>Review and approve the commissioning management procedures (hand over, checklists, interfaces, punch list, internal organisation, and sign-off certificates).</li> <li>Review and approve the commissioning dossiers prepared by the Contractor (including database populating and operational test procedures writing).</li> <li>Coordinate activities of the commissioning team (system engineers, discipline supervisors, planning / punch list controller, Asset holder).</li> <li>Identify and address all interface issues with other project packages with respect to commissioning.</li> <li>Prepare overall commissioning plan and obtain approval for the same in consultation with Asset Holder.</li> <li>Responsible to check and endorse mechanical completion</li> <li>Responsible for witnessing and monitoring the pre-commissioning activities performed by the Contractor.</li> <li>Countersign all pre-commissioning dossiers at Ready for Commissioning (RFC) status.</li> <li>Control all commissioning activities performed by the Contractor and its reporting.</li> <li>Check progress against planning and recommend any necessary corrective actions, close follow up on punch list with Contractor and Asset Holder.</li> <li>Coordinate with Contractor/Vendors to solve system/equipment performance problems.</li> <li>Coordinate schedule for equipment vendor's presence/visits at site(s), on-job and classroom training to Operations to assist in the commissioning of critical equipment and processes.</li> <li>Review and approve the commissioning dossiers after completion of commissioning activities and sign the Ready for Start Up and hand over certificates</li> <li>Participate and contribute to all safety design review and studies.</li> <li>Support and assist project team in project closeout gate.</li> <li>Actively participates and contributes to Qatari development programmes.</li> </ul><br><ul> <li>Sc. in an Engineering Discipline with extensive experience in commissioning of oil and gas projects.</li> <li>Minimum of twelve (12) years' experience in design, construction, commissioning, and start-up of oil &amp; gas processing plants and preferably offshore with EPIC contracting companies of which a minimum eight (8) years Commissioning Coordinator/Team Leader.</li> <li>Excellent interpersonal and communication skills</li> <li>Leadership and managerial skills</li> <li>Relevant technical expertise. Multi-discipline engineering exposure with troubleshooting and problem-solving skills.</li> <li>Good IT and analytical skills.</li> <li>The ability to work well under pressure.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

Company Description M/s Samsung E&A is an engineering and construction organization delivering large-scale projects across infrastructure and industrial sectors. The company focuses on quality, safety, and innovation in all phases of project execution, from design through commissioning. Teams work in diverse, multicultural environments and collaborate closely with clients and partners to meet demanding technical and regulatory standards. Professionals joining Samsung E&A can expect structured processes, exposure to complex projects, and opportunities for continuous skill development. Role Description The Quality Assurance Quality Control Engineer is a full-time, hybrid role based in Al Khor and Al Thakhira, Qatar, with some flexibility for work from home. The role is responsible for developing, implementing, and maintaining QA/QC procedures and standards across construction activities, ensuring compliance with project specifications, codes, and regulations. Day-to-day tasks include planning and performing inspections and tests, reviewing drawings and method statements, monitoring materials and workmanship, and documenting non-conformities with clear corrective actions. The engineer will coordinate with project managers, site engineers, subcontractors, and suppliers to resolve quality issues, support audits, and prepare detailed quality reports. The role also involves continuous improvement of quality systems, training site personnel on QA/QC requirements, and supporting handover documentation. Qualifications Candidates should possess strong Quality Assurance skills, including developing and implementing quality plans, procedures, and documentation in construction or engineering projects. Candidates should possess practical Quality Control skills, including executing inspections, supervising tests, and verifying materials and workmanship against project standards. Candidates should possess Quality Auditing skills, including planning and conducting internal and external audits, reporting findings, and following up on corrective and preventive actions. Candidates should possess Quality Management skills, including familiarity with quality management systems (e.g., ISO 9001), performance metrics, and continuous improvement methodologies. Candidates should possess Inspection skills, including interpreting technical drawings and specifications, using inspection tools, and preparing clear inspection reports. Bachelor’s degree in Civil, Mechanical, or related Engineering discipline, or equivalent technical qualification. Experience in construction or industrial projects, preferably with large EPC or infrastructure works in the Middle East. Strong knowledge of relevant standards and codes, and ability to work with multicultural teams and multiple stakeholders. Proficiency in MS Office and basic quality management or reporting software; strong written and verbal communication skills in English. Ability to work on-site in Al Khor and Al Thakhira, Qatar, with flexibility for hybrid work and occasional extended hours based on project needs.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 235551 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-10-25</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Implements ICSS engineering, supports the ICS Security sustainment activities, provides project support and participates in ICS Security audits, risk assessments, technology evaluations, &amp; self-assessments, advises ICS Custodians and ICSE Technicians to ensure ICS Security maintenance performance is achieved, and supports in periodic reviews of ICS security equipment strategies, ICS Security Policy and Design Specifications.</li> </ul><br><ul> <li>Support the implementation of ICS Security engineering specifications and related procedures, work practices, manuals, and development of equipment strategies for new projects. Identify limitations of existing systems, recommend best practices and upgrades.</li> <li>Review the design such as System Architecture, Network Architecture, Functional Design Specifications, Detailed Design Specifications, Interface Agreements and ensure compliance to ICS Security engineering specifications.</li> <li>Participate, review the ICS risk assessments, technology evaluations, and deviation requests, DRP (Disaster Recovery Plan) simulations.</li> <li>Validate the system built through FAT and SAT for the department.</li> <li>Coordinate and ensure deliverables as per the Operational Readiness Procedure to ensure smooth handover to ICS Security Operations.</li> <li>Participate in ICS Security incident investigations or Root Cause Failure Analysis, continuous improvement and productivity enhancement initiatives.</li> <li>Serve as focal point to ICS Security Custodians and ICSE Technicians to ensure alignment with the ICS Security Policy &amp; Specifications.</li> <li>Provide technical support for clarifying, following and implementing ICS Security Policy requirements across engineering sections, development teams, expansion teams, and operations.</li> <li>Support in planning and conducting periodic ICS Security self-assessments to evaluate compliance with the ICS Security Policy.</li> <li>Participate in life cycle management review of ICS in scope inventory and update inventory periodically.</li> </ul><br><ul> <li>Bachelor's degree in Engineering (Instrumentation &amp; Control, Electrical, Electronic, Computer) or Computer Science.</li> <li>6 years' experience in Oil and Gas Industry operations, technical, engineering with ICS Security Experience.</li> <li>Experience of implementing security controls within an OT environment.</li> <li>Understanding of different Industrial Control Systems environments.</li> <li>ICS System Security Experience, Knowledge of Networking, Security tools, Knowledge of ICS Security monitoring like IDS/IPS, SIEM etc.,</li> <li>Proficient in written and spoken English.</li> <li>Computer Literate.</li> <li>Excellent interpersonal skills, highly proficient in handling personnel, administrative, organizational and logistical issues.</li> <li>Solve issues associated with ICS Security design, sustainment.</li> <li>Lead ownership of issues related to ICS Security to support and drive continuous improvement.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Knowledge / application of Procedures, Specifications and Project rules by all the members of each Project. Estimation of quantities in the Proposal phase. Assessment / Criticism of Geotechnical Studies and consequences derived from it. Calculation and design of Land preparation / earthmoving work. Calculation and design of Infrastructures / Urbanization / Rainwater collectors. Calculation and design of roads and pavements of the Unit. Calculation of shallow and piloted foundations (structures / equipment). Calculation of foundations for equipment subjected to dynamic actions. Calculation of foundations and structures (metal / concrete) trays / pipe supports. Calculation of foundations and structures (metal / concrete) Industrial buildings. Calculation of foundations and structure (metal / concrete) BLAST-PROOF buildings. Calculation of underground facilities (rafts, ditches, manholes, buried pipes, ditches, etc.) Approval of drawings from the Metallic Structure Workshop. Subcontract management (process units, buildings, platforms, etc.) Software management (STAADPRO, FOUNDATION 3D, MAT 3D, STORMCAD, etc.) Architecture design of buildings, facades, roofs, finished tables, plumbing, sanitation, etc. (SECTION only: ARCHITECTURE) Compliance with deadlines according to the Project Program. Control over the Engineering Hours budgets and those derived from the Work Units, calculated and designed in the Department, always taking as reference the values that served as the basis during the Proposal phase. Involvement in project plans that involve: cost reduction (Engineering / Construction), recovery of progress or expediting of Subcontractors. Coordinate activities to be subcontracted or subcontracted Verification of the absence of interference at the departmental level and between departments. Review and check drawings of the discipline’s work carried out in the Project. Discuss Vendors drawings and from other departments. Inform the Discipline Leader of changes detected, about activities carried out or in progress. Monitoring the correct use and adaptation to work of different tools (NC, Plan4E, NVAT, Documentum, Lessons Learned, etc.) Application of the Quality Control procedures. Participate in the development of the Lessons Learned. Request adequate resources for the design of activities that have previously been subject to the relevant calculations. Performing periodic self-certification of those procedures that apply to its position.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

Hii<br>Greetings from Mekdam Technical Services, Qatar!<br>We are currently looking for experienced professionals for OT Cyber Security positions in Qatar within the Oil & Gas sector.<br>Available Positions:<br>OT Cyber Security Engineer Senior OT Cyber Security Engineer OT Cyber Security Specialist<br>We are particularly interested in professionals with experience in OT/ICS Cyber Security, DCS, SIS, SCADA, Industrial Control Systems, and Oil & Gas environments.<br>Experience level : 6-10 Years<br>The positions require a Bachelor’s degree in Automation & Control Systems, Industrial Control Systems, Cyber Security, Computer Science Engineering, or a related discipline, along with relevant professional experience and fluent English communication skills.

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Senior Fire and Life Safety Engineer (Theme Park and Entertainment) to join our team in Qatar! In this role, you will be part of the Construction Supervision Consultant team and support the delivery of a landmark luxury hospitality and entertainment development featuring immersive entertainment experiences, world-class hospitality, premium retail, and diverse leisure attractions. You will supervise the installation, testing, commissioning, certification, and handover of fire protection and life safety systems across complex hospitality, entertainment, themed attraction, and high-occupancy facilities. You will ensure that all systems are compliant, fully integrated, operationally effective, and aligned with the Contract Documents, approved fire engineering strategies, applicable codes, Civil Defense requirements, and international best practices.</p><p>What You ll Be Doing:</p><ul><li>Supervise the construction, installation, testing, and commissioning of all fire protection and life safety systems in accordance with the Contract Documents, approved IFC drawings, fire engineering strategies, applicable codes, and Civil Defense requirements.</li><li>Monitor the Contractor s fire and life safety works to ensure compliance with approved quality standards, construction methodologies, project schedules, and HSE requirements.</li><li>Review and provide technical comments on shop drawings, material submittmits, method statements, RFIs, inspection requests, and other technical submissions related to fire protection and life safety systems.</li><li>Supervise the installation and integration of fire detection and alarm systems, sprinkler systems, fire suppression systems, smoke management systems, emergency lighting, fire pumps, hydrant systems, gaseous suppression systems, and other fire protection installations.</li><li>Provide specialist technical oversight for themed entertainment venues, indoor attractions, ride facilities, entertainment spaces, and high-occupancy public areas.</li><li>Coordinate fire and life safety interfaces with architectural, structural, mechanical, electrical, ICT, security, ride systems, show systems, building management systems, and specialist attraction vendors.</li><li>Monitor compliance with approved means of egress, compartmentation, fire stopping, smoke-control strategies, occupant evacuation requirements, emergency access provisions, and passive fire protection installations.</li><li>Witness inspections, integrated systems testing, fire alarm cause-and-effect testing, smoke-control testing, functional testing, and commissioning activities.</li><li>Coordinate with Civil Defense authorities, specialist fire consultants, operators, and commissioning teams to support inspections, approvals, operational readiness, and occupancy certification.</li><li>Monitor construction quality through regular inspections, identify non-conforming works, and coordinate corrective actions with the Contractor and QA/QC team.</li><li>Support the Resident Engineer in evaluating variations, technical issues, engineering clarifications, and site instructions related to fire protection and life safety systems.</li><li>Participate in snagging, de-snagging, substantial completion inspections, handover activities, and Defects Liability Period inspections.</li><li>Review as-built drawings, operation and maintenance manuals, fire-system testing records, commissioning documentation, warranties, and handover records for completeness and compliance.</li><li>Prepare technical reports, inspection records, progress updates, and recommendations for submission to the Resident Engineer and Project Management team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Fire Protection Engineering, Mechanical Engineering, Electrical Engineering, or a related engineering discipline.</li><li>Professional Engineer, Chartered Engineer, Certified Fire Protection Specialist, or equivalent professional registration is preferred.</li><li>Minimum 12 years of experience supervising fire protection and life safety systems on major hospitality, entertainment, mixed-use, or destination developments.</li><li>Demonstrated experience in Construction Supervision or Resident Engineering roles on large multidisciplinary projects.</li><li>Proven experience supervising fire and life safety systems for major public assembly buildings, entertainment venues, theme parks, integrated resorts, convention facilities, airports, or other complex high-occupancy developments.</li><li>Strong experience with fire engineering principles, smoke-management systems, fire detection and suppression systems, emergency evacuation systems, and integrated life safety systems.</li><li>Experience supervising integrated systems testing, testing and commissioning, operational readiness, and project handover.</li><li>GCC experience, including coordination with Civil Defense authorities, is highly desirable.</li><li>Comprehensive knowledge of fire protection engineering, life safety systems, construction supervision practices, and regulatory compliance for major hospitality, entertainment, and mixed-use developments.</li><li>Strong understanding of fire detection and alarm systems, sprinkler systems, fire suppression systems, smoke-management systems, emergency lighting, passive fire protection, and integrated life safety systems.</li><li>Extensive knowledge of fire and life safety requirements for themed attractions, entertainment venues, indoor public spaces, high-occupancy facilities, and complex guest environments.</li><li>Strong understanding of crowd movement, occupant evacuation principles, emergency response planning, integrated systems testing, testing and commissioning, and operational readiness requirements.</li><li>Proven ability to coordinate multidisciplinary stakeholders, including Contractors, specialist fire consultants, attraction vendors, operators, Civil Defense authorities, commissioning teams, and statutory authorities.</li><li>Strong analytical and problem-solving capabilities, with the ability to identify fire and life safety risks, engineering conflicts, and practical site solutions.</li><li>Excellent communication, coordination, reporting, and stakeholder-management skills.</li><li>Ability to review and interpret fire engineering reports, IFC drawings, technical specifications, shop drawings, cause-and-effect matrices, commissioning documentation, and operation and maintenance manuals.</li><li>Strong organizational skills, with the ability to manage multiple work fronts while maintaining focus on quality, safety, regulatory compliance, and contractual requirements.</li><li>Ability to function effectively within large multidisciplinary construction environments while maintaining focus on life safety, operational readiness, successful commissioning, regulatory approvals, and project handover.</li></ul>

<br><p><strong>Design and Engineering:</strong></p><ul><li><p>Prepare CCTV, ACS system design concepts, device layouts, riser diagrams, schematic diagrams, and system architecture.</p></li><li><p>Perform CCTV storage calculations, bandwidth calculations, camera coverage review, access control door schedule review, controller sizing, power / UPS considerations, and network requirements.</p></li><li><p>Ensure designs are aligned with MOI-SSD requirements, client specifications and project requirements.</p></li></ul><p><strong>&nbsp;</strong></p><p><strong>Pre-Sales and Tender Support:</strong></p><ul><li><p>Review RFQs, tender documents, drawings, specifications, and client requirements.</p></li><li><p>Prepare compliant technical and commercial proposals for CCTV, ACS, intrusion detection, intercom, structured cabling, networking, and related ELV systems.</p></li><li><p>Prepare BOQs, cost sheets, supplier comparisons, compliance statements, technical clarifications, and value engineering options.</p></li><li><p>Support the sales team during client meetings, technical discussions, and proposal presentations.</p></li><li><p>Identify technical risks, commercial risks, exclusions, assumptions, and scope gaps before submission.</p><br></li></ul><p><strong>Costing and Estimation:</strong></p><ul><li><p>Prepare accurate cost sheets with proper material, labor, installation, testing, commissioning, programming, documentation, and contingency considerations.</p></li><li><p>Validate supplier quotations technically and commercially.</p></li><li><p>Prepare comparison sheets and recommend cost-effective solutions.</p></li><li><p>Maintain standard cost templates, BOQ formats, and estimation records.</p></li><li><p>Take ownership of checking the technical and commercial accuracy of submitted BOQs, cost sheets, and proposal documents before internal approval.</p></li></ul><p><strong>&nbsp;</strong></p><p><strong>Technical Documentation:</strong></p><ul><li><p>Prepare technical submittals, material compliance sheets, method statements, system descriptions, and handover-related technical documents when required.</p></li><li><p>Prepare responses to consultant comments, client clarifications, RFIs, and technical queries.</p></li></ul><p><strong>&nbsp;</strong></p><p><strong>Coordination and Support:</strong></p><ul><li><p>Coordinate with vendors, suppliers, project teams and management.</p></li><li><p>Support project handover by explaining scope, design basis, cost assumptions, and exclusions.</p></li><li><p>Assist in troubleshooting technical issues during project execution when related to proposed design or system architecture.</p></li><li><p>Keep updated with market solutions, vendor products, pricing trends, and competitor offerings.</p></li></ul><p><strong>&nbsp;</strong></p><p><strong>Required Skills and Experience:</strong></p><ul><li><p>Minimum 10 years of ELV/security systems experience, preferably in Qatar.</p></li><li><p>Strong hands-on experience ELV/security system design and estimation capability.</p></li><li><p>Strong understanding of MOI-SSD requirements and approval processes.</p></li><li><p>Excellent Excel skills.</p></li><li><p>Strong knowledge of VMS, NVR/server-storage sizing, camera selection, ACS controllers, readers, structured cabling design and networks.</p></li><li><p>Ability to read and interpret tender drawings, specifications, IFC drawings, and consultant requirements.</p></li><li><p>Strong AutoCAD / Visio / MS Office skills.</p></li><li><p>Good communication skills for client meetings, consultant clarifications, and sales support.</p></li><li><p>Ability to prepare clear technical proposals, compliance statements, and value-engineered alternatives.</p></li><li><p>Experience with major CCTV / ACS brands such as Axis, Hikvision, Avigilon, Milestone, Genetec, Lenel, Honeywell.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>UPDA/MMUP registered engineer</p></li><li><p>Experience with MOI DSA / DIA / inspection processes</p></li><li><p>Certifications: Milestone/Genetec, Avigilon ACC, HikCentral and Lenel ACS</p></li><li><p>Structured cabling design certification is a plus</p></li><li><p>Networking certifications: CCNA</p></li><li><p>Storage/server knowledge: Dell, HPE, RAID/storage sizing, VMS storage calculation</p></li></ul>