Radiographer Jobs in Qatar

<p>JOB PURPOSE / OBJECTIVE Provide quality technical support in welding and fabrication / Shop Management. Ensure consistent quality of work by implementing quality control standards. Manage of materials, spare parts. Ensuring proper maintenance and calibration of workshop equipment for optimal performance and safety. KEY ACCOUNTABILITIES People Management Monitor the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures. Ensure Direct Hires /Baseload / Call-off Contractors comply with all company policies, procedures, Standard Maintenance Procedures, and Daily Instructions. Maintain good communications between Supervisor and Production/Technical personnel. Provide professional Leadership/direction to Technicians to complete the tasks with safety and quality. Assist in certification process of workers assigned through training department. Routine Duties Perform PM of all equipment’s & tools and bring any abnormalities to the attention of Supervisor immediately and take necessary corrective actions. Carries out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations to repair parts that arrive in Valve shop. Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to Valve shop.? Personally perform the cutting/welding tasks and demonstrate practical knowledge and expertise. Ability to carry out soldering and brazing jobs. Must have knowledge of codes and standards related to piping materials & fittings. Carry out all assessment of job plan including JSA, review and knowledge of isometric drawings, P&IDs, understands recommendations to perform the job in workshop/ Field. Ensure that all Welding / Fabrication activities are performed in compliance with the ERG recommendations/policies. Ensure proper welding electrodes are used by all welders and ensure the electrodes are preserved properly. Ensure the weld joints are properly prepared and proper procedure is followed by all fabricators/welders! Ensure proper materials are used by all fabricators and welders. Ensure all welders are qualified and the quality inspection requirements of all jobs are fulfilled. Ensure the fabrication and welding jobs are performed with good workmanship. Ensure availability of welding consumables and PPEs and coordinate with Supervisor/planner to avoid shortage. Coordinate with workshop supervisor in providing specifications, SOW etc. & assist in technical evaluations related to workshop activities. Must use SAP functionality to acknowledge and execute scheduled jobs. KEY ACCOUNTABILITIES Support emergency planned SD’s and TA related to valve shop in workshop activities. Should be able to develop, review / revise procedures related to Valve Shop activities. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Support in achieving the department metrics. Perform equipment PM/Inspection in a timely manner. Ability to make necessary adjustments with minimum of Supervision, trouble shoot equipment problems, recommend solutions, resolve root cause, record/report findings. Shop Management - Provide necessary support to Workshop Supervisor for smooth functioning Fabrication Shop. Issue Permit in and around Workshop area under workshop ownership. Maintain good housekeeping and order in the workshop. Policies, Systems, Processes & Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes, and practices in order to increase productivity and operational efficiency. Implement all relevant Section’s policies, processes, procedures, and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required?(Qualification1 / Discipline: Diploma in Engineering. Preferred?(Qualification1 / Discipline): - Experience Required?(Years2 / Job Level3 / Industry): 5-7 years of experience in the Petrochemical Industry Preferred?(Years2 / Job Level3 / Industry): Experience in the Petrochemical Industry Other Job Specific Requirements and/or Vocational Accreditations Working knowledge of P&ID and Isometric Drawing Interpretation Working knowledge of Gas Cutting / Cylinder handling / Cutting Set Preparation Working knowledge of Grinding / drilling / hammering Working knowledge of Piping & piping supports- fabrication. Working knowledge of Plate bending / rolling / shearing Working knowledge of SMAW, TIG, MIG, SPOT welding Working knowledge of Welding electrode identification / baking / storage Working knowledge of Pneumatic tools and hand tools / Overhead cranes / Lifting Tools and Tackles Hold welder certificate on welding procedures in GAS, ARC, MIG and TIG welding as per relevant ASME. Languages Required?(Language / Level4): English - working knowledge. Preferred?(Language / Level4): - WORKING RELATIONSHIPS Internal Maintenance Department, Technical Department, HSE Departments, ERG External Subcontractors</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Technical Engineer performs design management of various types of projects residential commercial, warehouse/industrial buildings. Reviews the structural design of projects. Initiates value engineering exercises and identifies potential issues/constraints in design and construction during the early stages of design. Checks appropriateness of structural system and correctness of design criteria proposed by consultants. Provides direction to consultants to ensure complete submission of structural deliverables within project schedule. Performs the task of managing the documentation of the structural drawings in coordination with architectural and MEP Works.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Analyze and configure the basic structural components of a building or other structure for ensuring the quality of design.</p><br> <p>Review the design criteria (basic structural components, geotechnical properties, wind loads, seismic loads, loads, fire protection) and ensure adequacy of design.</p><br> <p>Analyze the structural elements to ensure the quality of the design.</p><br> <p>Analyze and reviews the loading plan and ensure compliance with codes and the project operational purpose.</p><br> <p>Determine the pressures that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes.</p><br> <p>Study the impact of the temporary works (formwork, tower cranes foundations and supports) on the structural elements, provide calculations, details and ensure compliance.</p><br> <p>Liaise with designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction of the proposed project.</p><br> <p>Provide safe structural solutions to suite the architectural and MEP requirements.</p><br> <p>Coordinates and oversees all onsite material testing, ensure that all such testing with spec and codes.</p><br> <p>Ensures weekly report detailing exact progress of all material requirements and areas of concern/delay.</p><br> <p>Ensures all shop drawings are prepared accurately followed by all as-built drawings.</p><br> <p>Close out technical submittals to be made available.</p><br> <p>Closes out material submittals to be made available and ensures that during the course of the Project, all required material submittals required for close out are prepared in advance.</p><br> <p>Leads and support teams in enhancing the competencies through facilitating effective coaching and mentoring.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Advanced proficiency in CAD software and other design tools for drafting and creating technical drawings, ensuring accuracy and adherence to design specifications.</p><br> <p>Extensive knowledge of architectural and engineering principles to effectively coordinate technical aspects of projects and resolve design challenges.</p><br> <p>Strong understanding of building codes, regulations, and industry standards to ensure compliance and quality assurance throughout the design process.</p><br> <p>Excellent communication and leadership skills to collaborate with interdisciplinary teams, oversee technical coordination efforts, and align project objectives.</p><br> <p>Problem-solving abilities to anticipate and address technical issues, optimize project outcomes, and contribute to the successful delivery of design projects.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Cost Management L3<br>Drawings/Specifications L3<br>QA/QC L3<br>Geotechnical Engineering L3<br>Agility<br>HSE L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or Civil Engineering<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: EPA Universal Certification<br>Driver's License<br>HVAC Certification<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>•</span><span> Perform rigging and lifting activities safely as per site procedures and lifting plans.</span><br></p><br><p><span>•</span><span> Inspect slings, shackles, hooks, wire ropes, and other lifting accessories before use.</span><br></p><br><p><span>•</span><span> Assist in lifting, shifting, loading, unloading, and positioning of equipment and materials.</span><br></p><br><p><span>•</span><span> Follow instructions from the Lifting Supervisor and ensure safe communication during lifting operations.</span><br></p><br><br><span>Requirements</span><p><span>•</span><span>*</span><b><b>Minimum 4 years</b></b><span>*</span><span> of experience as a Rigger.</span><br></p><br><p><span>•</span><span> Must be </span><span>*</span><b><b>QatarEnergy (QE) approved.</b></b><span>*</span><br></p><br><p><span>•</span><span> Must hold </span><span>*</span><b><b>valid Rigging Certificates / Third-Party Certifications.</b></b><span>*</span><br></p><br><p><span>•</span><span> Must have a </span><span>*</span><b><b>Transferable Visa / NOC</b></b><span>*</span><span> .</span><br></p><br><p><span>•</span><span> Candidates with </span><span>*</span><b><b>Ras Laffan / Dukhan / Mesaieed Gate Pass</b></b><span>*</span><span> will be preferred.</span><br></p><br><p><span>•</span><span> Good knowledge of safe rigging practices, lifting equipment, and hand signals.</span><br></p><br><br> </div>

Key Responsibilities:Technical Documentation: Write, check, and validate digital documentation and Standard Operating Procedures in accordance with project and company policies using professional editing tools. Administer the Content Management System to ensure a single source of accurate information is available digitally to all maintenance staff. System Integration: Utilize systems such as SAP, Cormap, Share Point, and others to source information and configure the documentation system for optimum creation, approval, distribution, and publication. Health, Safety & Environment (HSE): Assist the Program Manager in implementing safe systems and controls within your area of responsibility. Understand, implement, and comply with company HSQE policies, and fully participate in the behavioral safety agenda. Compliance: Ensure all data and information within the local documentation system is updated and approved in compliance with local procedures and the company's compliance policies and reporting ethos. Engineering Liaison: Work closely with Maintenance Engineers, Technical Managers, and Engineering Services to facilitate successful and timely approvals. Continuous Improvement & Quality: Continuously develop departmental processes and manage relationships with internal and external suppliers to position the company as an industry leader in train maintenance integrity. Requirements Experience with Digital Maintenance Management Systems. Proven experience delivering technical documentation in a heavy industry environment (Rolling Stock maintenance highly preferred). Proficiency in Microsoft software (Word, Excel, and Power Point). Effective organizational and time management skills. Excellent communication and interpersonal skills

As a pure player in water and essential services, Saur works to protect the environment in the heart of the territories it serves.<br><br>Saur has always acted to offer the same quality of service to small towns as to large cities, guided by its mission: to restore to water the value it deserves.<br><br>At a time when the challenges of the ecological transition are central to the problems faced by society worldwide, Saur is reasserting its commitments to take action, advocating and rallying all stakeholders to ensure a safer world for future generations.<br><br>Further details on our web site: http://www.saur.com/<br><br>We are currently looking for a Technical & Asset Manager, for Doha, Qatar.<br><br>Mission:<br><br>Lead six key functions covering Asset Management, GIS, Handover/Takeover, IT & OT, Innovation, and Technical Studies, ensuring the reliability, performance, digitalization, and continuous improvement of water and wastewater infrastructure.<br><br>Responsibilities:<br><br>Asset Management: lifecycle optimization, asset inventory, preventive maintenance, CMMS/Maximo, reliability, RCM/FMECA and RCA. GIS: management of sewer, stormwater, groundwater and TSE network data, mapping, operational information and maintenance support. Handover/Takeover: technical and operational readiness of new facilities, commissioning, documentation, training, spare parts, Maximo and HSE preparation. IT & OT: management of IT infrastructure, cybersecurity, SCADA, PLC/RTU, automation, telemetry and instrumentation. Innovation: digital transformation, smart asset management, predictive maintenance, AI, remote monitoring, energy efficiency, climate resilience and sustainability. Technical Studies: engineering studies, improvement proposals, technical-commercial offers, operational defect resolution and studies for new facilities. Leadership: manage multidisciplinary teams and coordinate with clients, contractors, surveyors, maintenance teams and SAUR Group technical resources.<br><br>Requirements:<br><br>Bachelor's degree in Engineering (Civil, Mechanical, Electrical, Environmental or related field); Master's degree is an advantage. Minimum 10–15 years of experience in asset management, infrastructure operations, or utilities (water/wastewater sector preferred), in the water or wastewater fields. Proven experience managing multidisciplinary teams across engineering, maintenance, GIS, IT/OT, and technical projects. Strong knowledge of Asset Management principles, lifecycle planning, reliability engineering (RCM, FMECA, RCA), and preventive maintenance strategies. Good understanding of GIS systems and spatial asset management. Experience in commissioning, handover/takeover of infrastructure assets, and technical documentation management. Strong analytical, project management, and problem-solving skills. Fluent in English. Arabic fluency is an advantage Excellent stakeholder management and negotiation skills.<br><br>SAUR is a company committed to diversity and equal opportunities. In this way, the selection process ensures that all candidates have an equal opportunity to apply without distinction as to race, colour, religion, sex, national origin, age, sexual orientation, gender identity or any other characteristic protected by law

Workflow:1. L1 remote support for ticketso Grabbing incident or service request tickets involving entry level & midrange level industry standard router and switches.§ IP and optics devices hardware and software issues§ Routing and switching troubleshootingo Incident ticket analysis, remote support & resolutiono Methods of procedure creationo Communicating with clients through email, Webex & phone call for incident ticket resolution updateso Ticket documentation on Net Suiteo Technically escalating to remote Level 3 (Global TAC) support if required 2. L2 field support for ticketso Scheduling and performing onsite action as required§ Router and switches card, PSU, fan onsite replacement§ Onsite troubleshooting§ Onsite standby support 3. Warehouse and inventory managemento Make sure the physical is matching on Net Suite inventoryo Perform quarterly stock take<br>Deliverables Required:1. Ensure all logged incidents are resolved within the agreed SLA. Any potential missed SLA should be escalated to team leader2. Ensure all communication with clients is prompt, accurate, & professional to deliver best of client’s experience3. Ensure accurate & timely part replacement.4. Ensure timely escalation to Level 3 as needed through technical escalation requests (TERs)5. Documentation of problem resolution into TRT’s knowledge base6. Continuously learn additional technical and non-technical skills7. Ensure meeting 98% inventory KPI for the warehouse inventory.8. Compliance with company policy Requirements:· Must be able to speak business level English (B1-B2)· Candidates must possess a college degree in information technology (IT), computer science (CS), computer engineering (CE), electronics & communication engineering (ECE) or related courses for IT. NRS 1 training and certification would be an advantage· Must have 3-5 years of experience handling IT system hardware break fix & software resolution· Willingness to do both hardware and software support· Willing to work in “on call” schedule

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 228752 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Corporate &amp; Commercial <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-19</span></li></ul><br> <br> <br> <br> <br> <br> </div>

Job Summary:The Technical Office Manager plays a critical role in bridging the gap between the client, design, fabrication and installation teams. Oversees the daily technical and administrative operations of our marble business, ensuring projects move smoothly from initial estimation, material selection, shop-drawings drafting to fabrication and final installation. Should combine strong office management skills with a deep understanding of natural stone production processes, CAD drawing, project management, along with very good communication skills to manage the stakeholders. (Client, Production, installation & Admin)<br>Key Responsibilities:Technical Leadership & Coordination:Manage the Drafting/Estimating Team: Oversee the team responsible for creating Shop Drawings, CAD designs, and technical specifications for marble cutting and CNC machining. Project Management: Track project timelines from initial field templating to final site installation, ensuring all departments stay on schedule. Quality Assurance: Review technical drawings and specifications against client requirements to ensure accuracy before slabs are sent to the fabrication floor. Technical Problem Solving: Act as the main point of contact for resolving technical discrepancies between architects, designers, installation teams, and the fabrication shop.<br>Inventory & Supply Chain operations:Material Management: Oversee the purchasing and inventory management of stone slabs & blocks.<br>Office Management & Administration:Workflow Optimization: Develop and implement streamlined procedures for filing, project documentation, scheduling, and office workflows. Financial Support: Responsible of managing budgets, processing invoices, overseeing job costing, and handling customer billing. Team Supervision: Supervise administrative staff, manage office schedules, and assist HR with onboarding new employees<br>Tender & Estimation:Maintaining an updated tenders-Log with estimated submission date (Reasonable & within time frame) along with communication of the same with sales team / client. Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Price breakdown of each Item to set budgets for each activity. (Creation of project Brief with detailed budgeting for each assigned project) Selection of material that is suitable and can meet project needs. (If not specified) Cross-checking of material that is specified, suitability to the scope along with compliance to project spec`s with production & Warehouse teams. (Proposal of suitable alternative material & assumption of possible VEs) Maintain an updated material price list for the raw material in coordination with the procurement team. Pricing of related Vos, if any. Issuance of Price Quotations with the agreed general terms & conditions. (Mentioning an approximate / estimated duration of completion) Prepare related weekly/monthly reports & dash-boards to show progress. Coordination with all departments for actual updates to be reflected on cost in pricing new packages.<br>Engineering works:Issuance and approval of [PQD, MARs, MS, Test Reports, Structure calculation reports, VOs, Notices, document submittals … etc.]Drafting & approval of Work-shop & as-built drawings sketches / proposals & presentations. Issuance of cutting lists, Job-orders with all related detail sketches for production. Material selection (jointly with warehouse & factory Manager) Issuance of required material requisitions. Issuance of notice of Vos. Technical coordination between site, factory & accounting teams. Follow-up with 3rd partie`s (Out sourced resources):Test reports [ With QA/QC team]Structure calculations - Accessories suppliers [With Procurement team]Scheduling of awarded as well as pre-awarded projects in coordination with all related departments in tender stage. Development of unique design patterns for the re-use of wastage and existing stocks. Continuous development and renewal of show-room designs in coordination with sales and production teams.<br>QS Tasks:Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Detection and flagging to possibility of Vos & Claims. Closure of Vos. Actual site survey and compliance to drawings. Issuance of IPCs to clients. Issuance of IPCs. Of sub-contractors.<br>KPIs:Reduction of the lead-time for every package than the planned release date. Accuracy of pricing VS market prices. Qty of awarded packages VS released & received Actual cost of each item VS budget. Accuracy of item description in BOQ creation to the actual Accuracy of actual take-off VS actual Qtys. Speed of Invoice submission and closure (getting approval) VS planned time frame. Speed of getting approvals on all technical submittals (on Revision basis) Accuracy and efficiency of drawings and details with the site conditions. Smooth technical coordination between Factory and site. Speed of orders processing and release from contract signature. Accuracy of As-built drawings to actual site conditions. Customer feedback on response to modifications, change & Variation orders.

<p>Provide technical expertise and strategic support in the field of aviation security. Contribute to the development of aviation security (AVSEC) policies, programs, and frameworks. Support initiatives and strengthen compliance oversight activities. Review aviation security programs and ensure their implementation in accordance with applicable standards. Enhance inspection practices and corrective action processes. Support capacity building and the professional development of teams. Provide technical advisory and contribute to informed decision-making. Lead and support strategic aviation security projects.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10+ Years of Experience</li><li>Minimum Qualification Bachelor's in aviation security or related field</li><li>Ability to analyze compliance gaps and develop effective solutions</li><li>Ability to conduct inspections and audits</li><li>Ability to verify compliance in a professional manner</li><li>Ability to apply regulatory requirements within operational environments</li><li>Ability to coordinate effectively with internal and external stakeholders</li><li>Strong communication skills in both operational and regulatory contexts</li><li>Strategic thinking capability</li><li>Ability to provide advanced technical advisory</li><li>Ability to lead complex initiatives</li><li>Ability to build capacity through training, mentorship, and guidance</li></ul>

Job Summary:The Technical Office Manager plays a critical role in bridging the gap between the client, design, fabrication and installation teams. Oversees the daily technical and administrative operations of our marble business, ensuring projects move smoothly from initial estimation, material selection, shop-drawings drafting to fabrication and final installation. Should combine strong office management skills with a deep understanding of natural stone production processes, CAD drawing, project management, along with very good communication skills to manage the stakeholders. (Client, Production, installation & Admin)<br>Key Responsibilities:Technical Leadership & Coordination:Manage the Drafting/Estimating Team: Oversee the team responsible for creating Shop Drawings, CAD designs, and technical specifications for marble cutting and CNC machining. Project Management: Track project timelines from initial field templating to final site installation, ensuring all departments stay on schedule. Quality Assurance: Review technical drawings and specifications against client requirements to ensure accuracy before slabs are sent to the fabrication floor. Technical Problem Solving: Act as the main point of contact for resolving technical discrepancies between architects, designers, installation teams, and the fabrication shop.<br>Inventory & Supply Chain operations:Material Management: Oversee the purchasing and inventory management of stone slabs & blocks.<br>Office Management & Administration:Workflow Optimization: Develop and implement streamlined procedures for filing, project documentation, scheduling, and office workflows. Financial Support: Responsible of managing budgets, processing invoices, overseeing job costing, and handling customer billing. Team Supervision: Supervise administrative staff, manage office schedules, and assist HR with onboarding new employees<br>Tender & Estimation:Maintaining an updated tenders-Log with estimated submission date (Reasonable & within time frame) along with communication of the same with sales team / client. Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Price breakdown of each Item to set budgets for each activity. (Creation of project Brief with detailed budgeting for each assigned project) Selection of material that is suitable and can meet project needs. (If not specified) Cross-checking of material that is specified, suitability to the scope along with compliance to project spec`s with production & Warehouse teams. (Proposal of suitable alternative material & assumption of possible VEs) Maintain an updated material price list for the raw material in coordination with the procurement team. Pricing of related Vos, if any. Issuance of Price Quotations with the agreed general terms & conditions. (Mentioning an approximate / estimated duration of completion) Prepare related weekly/monthly reports & dash-boards to show progress. Coordination with all departments for actual updates to be reflected on cost in pricing new packages.<br>Engineering works:Issuance and approval of [PQD, MARs, MS, Test Reports, Structure calculation reports, VOs, Notices, document submittals … etc.]Drafting & approval of Work-shop & as-built drawings sketches / proposals & presentations. Issuance of cutting lists, Job-orders with all related detail sketches for production. Material selection (jointly with warehouse & factory Manager) Issuance of required material requisitions. Issuance of notice of Vos. Technical coordination between site, factory & accounting teams. Follow-up with 3rd partie`s (Out sourced resources):Test reports [ With QA/QC team]Structure calculations - Accessories suppliers [With Procurement team]Scheduling of awarded as well as pre-awarded projects in coordination with all related departments in tender stage. Development of unique design patterns for the re-use of wastage and existing stocks. Continuous development and renewal of show-room designs in coordination with sales and production teams.<br>QS Tasks:Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Detection and flagging to possibility of Vos & Claims. Closure of Vos. Actual site survey and compliance to drawings. Issuance of IPCs to clients. Issuance of IPCs. Of sub-contractors.<br>KPIs:Reduction of the lead-time for every package than the planned release date. Accuracy of pricing VS market prices. Qty of awarded packages VS released & received Actual cost of each item VS budget. Accuracy of item description in BOQ creation to the actual Accuracy of actual take-off VS actual Qtys. Speed of Invoice submission and closure (getting approval) VS planned time frame. Speed of getting approvals on all technical submittals (on Revision basis) Accuracy and efficiency of drawings and details with the site conditions. Smooth technical coordination between Factory and site. Speed of orders processing and release from contract signature. Accuracy of As-built drawings to actual site conditions. Customer feedback on response to modifications, change & Variation orders.

Company Description<br><br>Being a Pullman Heartist means embodying and conveying the brand mindset through the values of commitment, adaptability and creativity.<br><br>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.<br><br>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.<br><br>Job Description<br><br>Perform preventive and corrective maintenance on kitchen and laundry equipment (e.g., ovens, dishwashers, washing machines, dryers, steam presses). Diagnose and troubleshoot mechanical and electrical issues promptly to minimize downtime. Ensure compliance with safety standards and manufacturer guidelines during repairs. Maintain accurate records of maintenance activities and spare parts inventory. Coordinate with the Engineering team for scheduled servicing and emergency repairs. Respond quickly to guest and operational requests related to kitchen and laundry equipment. Assist in energy-saving initiatives and equipment optimization.<br><br>Qualifications<br><br>Min. 2 years experience in a similar role in a five-star Hotel brand Strong troubleshooting skills and knowledge of safety procedures. Able to communicate in English Ability to work well under pressure in a fast-paced environment<br><br>Additional Information<br><br>Our Commitment To Diversity & Inclusion<br><br>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<br><br>Why work for Accor?<br><br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br><br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS

<p>We are looking for an experienced OTM Techno Functional Consultant with 6 to 7 years of hands-on experience in Oracle Transportation Management. The resource will work across both functional and technical areas, supporting OTM implementation, configuration, integration, troubleshooting, and business requirements.</p><p>Key Responsibilities</p><ul><li>Analyze business requirements and translate them into Oracle OTM solutions.</li><li>Configure and customize Oracle Transportation Management based on business requirements.</li><li>Work on OTM modules including planning, execution, freight settlement, rates, shipments, orders, and logistics.</li><li>Develop and support OTM integrations with Oracle ERP and other enterprise applications.</li><li>Work with XML, XSLT, SQL, REST APIs, SOAP APIs, and web services.</li><li>Develop and troubleshoot OTM interfaces and data flows.</li><li>Support OTM data migration, testing, deployment, and production issues.</li><li>Prepare functional and technical specifications.</li><li>Conduct unit testing, integration testing, and support UAT.</li><li>Analyze production issues and provide timely resolutions.</li><li>Work closely with business users, functional teams, technical teams, and project stakeholders.</li><li>Provide documentation and knowledge transfer to the support team.</li></ul><p>Required Skills</p><ul><li>6 to 7 years of experience in Oracle Transportation Management.</li><li>Strong techno-functional experience in Oracle OTM.</li><li>Good understanding of OTM configuration and business processes.</li><li>Strong SQL skills.</li><li>Experience with XML and XSLT.</li><li>Experience with REST and SOAP web services.</li><li>Knowledge of OTM integrations with Oracle ERP applications.</li><li>Experience with OTM interfaces, APIs, and data exchange.</li><li>Good understanding of logistics, transportation, shipment planning, and freight settlement processes.</li><li>Strong troubleshooting and analytical skills.</li><li>Good communication and stakeholder management skills.</li></ul><p>Preferred</p><ul><li>Oracle OTM Cloud experience.</li><li>Experience with Oracle Fusion Cloud.</li><li>Experience with OIC or other integration platforms.</li><li>Oracle OTM implementation or upgrade experience.</li><li>Experience working with global projects and distributed teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>6 to 7 years of experience in Oracle Transportation Management.</li><li>Strong techno-functional experience in Oracle OTM.</li><li>Good understanding of OTM configuration and business processes.</li><li>Strong SQL skills.</li><li>Experience with XML and XSLT.</li><li>Experience with REST and SOAP web services.</li><li>Knowledge of OTM integrations with Oracle ERP applications.</li><li>Experience with OTM interfaces, APIs, and data exchange.</li><li>Good understanding of logistics, transportation, shipment planning, and freight settlement processes.</li><li>Strong troubleshooting and analytical skills.</li><li>Good communication and stakeholder management skills.</li><li>Oracle OTM Cloud experience.</li><li>Experience with Oracle Fusion Cloud.</li><li>Experience with OIC or other integration platforms.</li><li>Oracle OTM implementation or upgrade experience.</li><li>Experience working with global projects and distributed teams.</li></ul>

Overview<br><br>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. <br><br>The Supply Technicians provide centralized retail supply and maintenance support; performs aspects of supply management work (e.g., inventory management, storage management, bar coding, property utilization) related to depot, local, or other supply activities. The technicians have a knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA.<br><br>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program!<br><br> You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. <br><br>Responsibilities<br><br> Performs inventory management procedures, including ordering, receiving and storing supplies. Selects the correct stock for issue, creates and process material release orders, and keeps records on incoming and outgoing stock. Reconciles customer documentation with the PSRA and SSA on issues, receipts, storage of supplies and equipment, and financial discrepancies. Screens dues-out reconciliation listings & prepares cancellation/follow up documents. Establishes and maintains automated and manual accounting records and corrects errors and exception documents. Provides status on supply requests, shipments and job-ordered items. Operates a Cannibalization Point in accordance with AR 710-2. Reconciles open requests, repairable exchange items and cannibalization items. Establishes and maintains stock records and other documents such as inventory, material control, accounting and supply reports. Assists in validating property book inventories for equipment at the sites. Performs prescribed load list and shop stock list duties to assist the DSSTs. Compare packing lists, receipt documents, bills of lading, inspection reports, other documents, with purchase orders/requisitions to verify accuracy of stock data and quantities received against bills of lading, and shipping documents. Assures stock numbers/prices/sources of data are correct through use of Army Master Data File (AMDF), Supply Bulletins (SBs), supply letters, regulations, etc. Revises quantities ordered based on number of items on hand & reviews records for possible substitution of items. Unloads, unpacks, inspects, counts, segregates and stores incoming supplies. Prepare Forms 2404, 2407) to submit a work order to the maintenance department. Repair and constructs fiberboard or wooden containers. Constructs bins, shelving and other storage aids. Packs, crates, stencils, weigh and bands equipment and supplies. Loads, unloads and moves stock using equipment such as forklifts and hand trucks. Required to climb a ladder and stand for long periods of time. Performs other duties and assignments assigned. <br><br>Qualifications<br><br> Qualifications Security Clearance: The position requires an active and current Secret level security clearance. Education/Certifications: High School Diploma required. Some college preferred. OSHA 10-Hour General Industry certification. Experience: Minimum three years’ experience in Unit Level Supply Management and Property Control. Must have a working knowledge of Microsoft Office, SAMS, and ULLS-G. Knowledge of principles and methods for accountability of supplies and equipment at retail/wholesale level, warehousing and moving goods by air, rail, sea, or road. Experience with a customer service-oriented company. Skills & Technology Used: Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed. Other software / work management tools as directed. Forklift operation. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. <br><br>#clearance

Job Description <div> <p>Executes all electric and associated work to the highest professional standard for the whole property</p> <p>Performs the tasks assigned to him and ensures their implementation while working independently.</p> <p>Acts on issues and concerns in his activity field immediately.</p> <p>Must be able to control the stocks and other items in his workshop and order more as required</p> <p>Abides to the daily task and ensures timely implementation</p> <p>Ensures oneself is thoroughly familiar with the hotel s emergency procedures and in a state of preparedness for any emergency which may occur.</p> <p>Is familiar with all related company documentation and especially with the relevant Operational Standards Manual for his/her field of responsibility.</p> <p>Assist in Task Force Teams for new openings</p> <p> </p></div><p><strong>Desired Candidate Profile</strong></p>Qualifications <div> <p> <strong>Education:</strong> Diploma or Certificate in Electrical Engineering/Installation</p> <p> <strong>Experience:</strong> Minimum 3 years in a similar electrical maintenance or installation role within a hospitality or facilities management environment</p> <p> <strong>Required Skills &amp; Competencies:</strong> </p> <p> </p> <ul> <li>Proven expertise in electrical systems maintenance, troubleshooting, and repair</li> <li>Proficiency in reading electrical schematics and technical documentation</li> <li>Strong inventory and stock management capabilities</li> <li>Ability to work independently and manage multiple tasks efficiently</li> <li>Knowledge of health and safety regulations and emergency procedures</li> <li>Excellent problem-solving and communication skills</li> </ul> <p> </p></div>

<p>Job Purpose Gather relevant information about plant equipment, piping, and platforms and prepare accurate drawings/diagrams using computer aided 3D design and 2D drafting software (preferably, but no limited to, PDS/SP3D, Microstation E3D, AutoCAD, and SPPID) in order to assist in visual communication about plant functions/design, bills of materials (BOM), and management of change (MOC). Key Accountabilities Data Gathering Make site visits and coordinate with concerned individuals/departments in order to collect as-built information about piping and instrumentation, equipment details, and structural pipe supports Preparation & Updating of Drawings Prepare Plot plan, Key plan, general arrangement drawings, isometrics, piping and instrumentation diagrams (P&IDs), pipe support drawings or any other drawings, Prepare equipmen/piping structural supports/platforms drawings including MTO and BOM, and MOC drawings, in line with Company's drafting standards. Perform site surveys and prepare As-built drawings according to site measurements. Update plant drawings as part of Management of Change (MOC) process. Performing quality checks on drawings prepared internally or externally Validate consistency between engineering drawings and plant databases (tag numbers, equipment IDs, line references) and escalate discrepancies. Control integration of vendor drawings into plant documentation ensuring alignment with existing plant design and standards . Ensure drawing readiness prior to Turnaround (TA) execution by identifying outdated or missing drawings. Support alignment between engineering drawings and asset management systems. Ensure proper capture, tracking, and incorporation of field redlines into final drawings with full traceability. Maintain tracking of drawing status (draft, under review, approved, as-built) and report overdue updates. Information Dissemination Control native files and upload, with assistance frorn RIM personnel, relevant information to the Company's electronic data management system (ECM) in order to ensure that the right information is available to the right personnel at all times. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency. Implement all relevant policies, processes, procedures and instructions of Projects Section so that worl<. is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Projects Section to guarantee employee safety and delivery of high quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies and standards. Capture and communicate lessons learned related to drawing errors, revisions, and field issues. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only</p><p>Qualifications & Experience Education Required: Diploma in Engineering Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Preferred : Bachelor's Degree in Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Experience Required : 3-5 years of experience in the O&G Industry. Preferred : Experience in Petrochemicals Industry.</p>

<p>Job Purpose Gather relevant information about plant equipment, piping, and platforms and prepare accurate drawings/diagrams using computer aided 3D design and 2D drafting software (preferably, but no limited to, PDS/SP3D, Microstation E3D, AutoCAD, and SPPID) in order to assist in visual communication about plant functions/design, bills of materials (BOM), and management of change (MOC). Key Accountabilities Data Gathering Make site visits and coordinate with concerned individuals/departments in order to collect as-built information about piping and instrumentation, equipment details, and structural pipe supports Preparation & Updating of Drawings Prepare Plot plan, Key plan, general arrangement drawings, isometrics, piping and instrumentation diagrams (P&IDs), pipe support drawings or any other drawings, Prepare equipmen/piping structural supports/platforms drawings including MTO and BOM, and MOC drawings, in line with Company's drafting standards. Perform site surveys and prepare As-built drawings according to site measurements. Update plant drawings as part of Management of Change (MOC) process. Performing quality checks on drawings prepared internally or externally Validate consistency between engineering drawings and plant databases (tag numbers, equipment IDs, line references) and escalate discrepancies. Control integration of vendor drawings into plant documentation ensuring alignment with existing plant design and standards . Ensure drawing readiness prior to Turnaround (TA) execution by identifying outdated or missing drawings. Support alignment between engineering drawings and asset management systems. Ensure proper capture, tracking, and incorporation of field redlines into final drawings with full traceability. Maintain tracking of drawing status (draft, under review, approved, as-built) and report overdue updates. Information Dissemination Control native files and upload, with assistance frorn RIM personnel, relevant information to the Company's electronic data management system (ECM) in order to ensure that the right information is available to the right personnel at all times. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency. Implement all relevant policies, processes, procedures and instructions of Projects Section so that worl<. is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Projects Section to guarantee employee safety and delivery of high quality products/services. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies and standards. Capture and communicate lessons learned related to drawing errors, revisions, and field issues. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only</p><p>Qualifications & Experience Education Required: Diploma in Engineering Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Preferred : Bachelor's Degree in Mechanical / Civil Engineering/ Instrument & Electrical Engineering. Experience Required : 3-5 years of experience in the O&G Industry. Preferred : Experience in Petrochemicals Industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>The <b>Helpdesk Agent (Call Center Agent)</b> will serve as the first point of contact for users requiring IT support through phone, email, live chat, and ticketing channels. The role involves diagnosing and resolving technical issues, logging incidents and service requests accurately, providing remote troubleshooting support, and escalating unresolved problems to the appropriate technical teams.<br></p><br><p>The Helpdesk Agent will also maintain complete ticket documentation, follow ITIL-aligned processes, deliver professional customer service, and support users with common applications, systems, and workplace technology.<br></p><br><br><span>RequirementsBachelor’s Degree in Information Technology, Computer Science, or a related field.<br>Minimum <b>5 years</b> of experience in IT Helpdesk, Service Desk, Call Center IT Support, or User Support.<br>Strong knowledge of Windows operating systems, Microsoft Office 365, Microsoft Teams, Microsoft Edge, and desktop troubleshooting.<br>Experience using ITSM or ticketing systems; <b>SMAX experience is preferred</b>.<br>Ability to diagnose and resolve common hardware, software, access, connectivity, and application-related issues remotely.<br>Strong incident logging, ticket prioritization, escalation, and follow-up skills.<br>Excellent telephone etiquette, customer-service orientation, and communication skills.<br>Ability to remain professional and composed while handling urgent issues or difficult users.<br><b>ITIL certification is mandatory</b>.<br>Fluent in <b>Arabic and English</b>, both written and spoken.<br>Willingness to work rotational shifts, including nights, weekends, and public holidays.<br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Key Responsibilities</b></p><p><b>Functional Responsibilities</b></p><ul><li>Configure and support <b>Microsoft Dynamics 365 Finance</b> modules based on business requirements. </li><li>Demonstrate strong hands-on knowledge of <b>Finance and Procure-to-Pay (P2P)</b> processes. </li><li>Analyze business requirements and translate them into functional specifications. </li><li>Configure procurement processes including purchase requisitions, purchase orders, receiving, invoice matching, and accounts payable. </li><li>Support financial processes including <b>General Ledger, Accounts Payable, Accounts Receivable, budgeting, and financial reporting</b>. </li><li>Conduct requirement gathering, gap analysis, and solution design. </li><li>Support UAT, system testing, defect resolution, and post-go-live activities. </li><li>Prepare functional documentation, user guides, and process specifications. </li><li>Provide end-user training and production support. </li><li>&nbsp;</li></ul><p><b>Technical / Techno-Functional Responsibilities</b></p><ul><li>Develop a strong understanding of the technical architecture of Dynamics 365. </li><li>Work with developers to design and implement customizations and enhancements. </li><li>Support integrations between Dynamics 365 and external applications. </li><li>Analyze technical issues and coordinate with development teams for resolution. </li><li>Understand data entities, workflows, APIs, and integration mechanisms within Dynamics 365. </li><li>Assist with data migration, validation, and reconciliation activities. </li><li>Support reporting and analytics requirements. </li><li>&nbsp;</li></ul><p><b>Mandatory Skills</b></p><ul><li><b>Microsoft Dynamics 365 Finance / Finance &amp; Operations</b> </li><li><b>Finance module</b> </li><li><b>Procure-to-Pay (P2P)</b> </li><li>Strong techno-functional consulting experience </li><li>Business requirements gathering and functional specification </li><li>Configuration and customization </li><li>UAT and production support </li><li>Integration and data migration knowledge </li><li>Strong troubleshooting and analytical skills </li></ul><p>&nbsp;</p><p><b>Bilingual Requirement</b></p><ul><li><b>Fluency in English is mandatory.</b> </li><li>Proficiency in <b>Arabic </b>is required. </li></ul><p>&nbsp;</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Preferred Skills</b></p><ul><li>Experience with <b>Dynamics 365 Finance &amp; Operations (D365 F&amp;O)</b></li><li>Knowledge of <b>Power Platform, Power Automate, Power BI</b></li><li>Understanding of <b>X++ and/or SQL</b> is an advantage.</li><li>Experience with APIs, web services, and third-party integrations.</li><li>Experience in ERP implementation or upgrade projects.</li></ul><p><br></p></div>

Job Summary:The Technical Office Manager plays a critical role in bridging the gap between the client, design, fabrication and installation teams. Oversees the daily technical and administrative operations of our marble business, ensuring projects move smoothly from initial estimation, material selection, shop-drawings drafting to fabrication and final installation. Should combine strong office management skills with a deep understanding of natural stone production processes, CAD drawing, project management, along with very good communication skills to manage the stakeholders. (Client, Production, installation & Admin)<br>Key Responsibilities:Technical Leadership & Coordination:Manage the Drafting/Estimating Team: Oversee the team responsible for creating Shop Drawings, CAD designs, and technical specifications for marble cutting and CNC machining. Project Management: Track project timelines from initial field templating to final site installation, ensuring all departments stay on schedule. Quality Assurance: Review technical drawings and specifications against client requirements to ensure accuracy before slabs are sent to the fabrication floor. Technical Problem Solving: Act as the main point of contact for resolving technical discrepancies between architects, designers, installation teams, and the fabrication shop.<br>Inventory & Supply Chain operations:Material Management: Oversee the purchasing and inventory management of stone slabs & blocks.<br>Office Management & Administration:Workflow Optimization: Develop and implement streamlined procedures for filing, project documentation, scheduling, and office workflows. Financial Support: Responsible of managing budgets, processing invoices, overseeing job costing, and handling customer billing. Team Supervision: Supervise administrative staff, manage office schedules, and assist HR with onboarding new employees<br>Tender & Estimation:Maintaining an updated tenders-Log with estimated submission date (Reasonable & within time frame) along with communication of the same with sales team / client. Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Price breakdown of each Item to set budgets for each activity. (Creation of project Brief with detailed budgeting for each assigned project) Selection of material that is suitable and can meet project needs. (If not specified) Cross-checking of material that is specified, suitability to the scope along with compliance to project spec`s with production & Warehouse teams. (Proposal of suitable alternative material & assumption of possible VEs) Maintain an updated material price list for the raw material in coordination with the procurement team. Pricing of related Vos, if any. Issuance of Price Quotations with the agreed general terms & conditions. (Mentioning an approximate / estimated duration of completion) Prepare related weekly/monthly reports & dash-boards to show progress. Coordination with all departments for actual updates to be reflected on cost in pricing new packages.<br>Engineering works:Issuance and approval of [PQD, MARs, MS, Test Reports, Structure calculation reports, VOs, Notices, document submittals … etc.]Drafting & approval of Work-shop & as-built drawings sketches / proposals & presentations. Issuance of cutting lists, Job-orders with all related detail sketches for production. Material selection (jointly with warehouse & factory Manager) Issuance of required material requisitions. Issuance of notice of Vos. Technical coordination between site, factory & accounting teams. Follow-up with 3rd partie`s (Out sourced resources):Test reports [ With QA/QC team]Structure calculations - Accessories suppliers [With Procurement team]Scheduling of awarded as well as pre-awarded projects in coordination with all related departments in tender stage. Development of unique design patterns for the re-use of wastage and existing stocks. Continuous development and renewal of show-room designs in coordination with sales and production teams.<br>QS Tasks:Opening and briefing of Packages (RFQs) Responsibility of BOQ creation and accuracy to the scope. (If In-house) Detection and flagging to possibility of Vos & Claims. Closure of Vos. Actual site survey and compliance to drawings. Issuance of IPCs to clients. Issuance of IPCs. Of sub-contractors.<br>KPIs:Reduction of the lead-time for every package than the planned release date. Accuracy of pricing VS market prices. Qty of awarded packages VS released & received Actual cost of each item VS budget. Accuracy of item description in BOQ creation to the actual Accuracy of actual take-off VS actual Qtys. Speed of Invoice submission and closure (getting approval) VS planned time frame. Speed of getting approvals on all technical submittals (on Revision basis) Accuracy and efficiency of drawings and details with the site conditions. Smooth technical coordination between Factory and site. Speed of orders processing and release from contract signature. Accuracy of As-built drawings to actual site conditions. Customer feedback on response to modifications, change & Variation orders.