Printing Engineer Jobs in Qatar 2026

4 to 10 years Naukri Gulf

Welder

On-site - Qatar - Qatar Wednesday

Engineering

Must have more than 3 years experience in welding works in running Petrochemical or Power Generation industry.Must have a good understanding of QA/QC and HSE compliance requirements.Must be practicing proper care of welding material.Must have experience in and be able to weld all carbon steel piping materials.Must have experience in and be able to weld the common stainless steel types.Must be aware of the different Heat Treatment and Stress Relieving requirements.Must be able to judge whether a proper weld preparation is made.Must be qualified for and be able to carry out welding with different techniques such as GMAW, GTAW, SMAW at all positions flat, vertical or overhead on plates and pipes according to ASME IX, 1G, 2G, 3G and 6G and shall be able to learn as per these.Able to perform grinding applications using manual and power tools.Must be able to read / interprets mechanical isometric drawings including weld requirement symbols.Must have experience in and be able to weld plate material in Column or Vessel walls.Must be able and willing to clean the work area.For understanding the WPS, use of the correct consumables, processes, equipment and to carry out the welding in accordance with the WPS and instruction from the Welding Inspector/Foreman.To use correct welding techniques and sequences in accordance with the procedure to minimize Heat effects on the work piece.To perform works as requested by the company including working at height or confined areas.For continual development and undertaking training in additional welding processes.To clean the weld after welding and to mark the unique identification details on the job adjacent to the joint as required by the QC Department.To assist Fabricators in the fit-up and assembly of the work piece.To clean the work area after the completion of welding and roll back the welding cable on completion of duty every day.To assist QC Engineer / Inspector and the Welding Foreman during procedure and welder qualification tests.For conducting their activities / duties in a manner so as to minimize potential accidents / incidents to themselves, their colleagues or the companies equipment and facilities.Responsible to adhere and follow the implemented Quality, Health, Safety and Environmental policy, objectives and procedures.Responsible for his own safety and others safety working around him.Desired Candidate ProfileEducational qualifications: Certified Welder or equivalent in a relevant discipline or standard based qualification or equivalent.

8 to 24 years Naukri Gulf

Transportation & Installation Lead

On-site - Qatar - Doha 13 August 2026

Engineering

Manage Contractors full pipeline pre commissioning and decommissioning scope from engineering planning through offshore execution and closeout.Review and approve contractors pre commissioning and decommissioning philosophies, execution strategies, and method statements.Coordinate activities related to pipeline pre-commissioning and decommissioning such as Flooding, Cleaning, Gauging, Hydrotesting, Dewatering, Drying and N2 purging whereas for de-commissioning - Pipeline isolation, Depressurization, Flushing, Cleaning, Subsea Pipeline cutting, Pipeline recovery, Abandonment in place, Grouting or capping, Spool removal, Subsea tie-in disconnection.Review contractors engineering calculations for Hydrotest pressure, Test duration, Fill volumes, Pig train configuration, Dewatering flow rates, Drying acceptance criteria, Nitrogen requirements, Compressor capacity, Pump sizing, Temporary equipment requirementsSupport engineering teams in defining decommissioning boundaries, pipeline status, contents, and isolation requirements.Ensure contractor's pre commissioning and decommissioning activities are planned in line with SIMOPS, HSE, environmental, and marine requirements.Coordinate with contractors, offshore operations, offshore VMT, diving, ROV, marine, and HSE teams for safe execution.Manage punch lists, technical queries, site queries, and non-conformances related to pipeline pre-commissioning and de commissioning.Act as the office-based focal point for offshore pipeline decommissioning and pre-commissioning activities and support offshore teams with technical guidance, troubleshooting, and decision-making during execution.Provide technical support for offshore changes, deviations, unexpected field conditions and formulating recovery plans including Management of ChangeDesired Candidate ProfileBachelor's degree in engineering in mechanical engineering or subsea engineering.8 years offshore installation experience on vessels in Transport & Installation activities with minimum 1 years as supervisory role in related field.5 years experience as Field Engineer or site supervisor onboard installation vessels for similar activities with emphasis on decommissioning of subsea facilities.Previous work experience with other major operators or LNG and knowledge of QELNG PTW systems is desirable but not mandatory.Extensive Knowledge in subsea pipeline pre commissioning and de commissioning, pipeline pigging, subsea isolation plugs, subsea decommissioning tools.Demonstrate extensive experience of pre-commissioning vessel supervision and Familiarity with international standards such as DNVST-F101, ASME B31.4, ASME B31.8, API standards, ISO pipeline and offshore standards, any Client-specific offshore standardExpertise in submarine pipeline decommissioning, including the use of technical plugs (e.g., STATS company isolation plugs) for safe isolation and abandonment.Fluent EnglishMS Office proficiencyHigh-pressure environment experienceProblem solving abilityTeam collaboration.

Full Time 1 to 5 years Naukri Gulf

Junior Sales & Procurement Engineer – Oil & Gas Materials & Equipment

On-site - Qatar - Doha 11 August 2026

Sales

We are seeking a Junior Sales & Procurement Engineer to support the sales and procurement of oil and gas materials and equipment, particularly piping materials, valves, fittings, flanges, and related products. The candidate will assist in developing business opportunities, preparing quotations, sourcing materials, coordinating with suppliers and clients, and ensuring timely delivery of quality products at competitive prices. <ul><li>Support sales activities for oil and gas piping materials, valves, fittings, flanges, and related equipment.</li><li>Identify potential clients and business opportunities in Qatar and the GCC market.</li><li>Assist in preparing technical and commercial quotations, proposals, and tender documents.</li><li>Follow up with clients regarding enquiries, quotations, orders, and ongoing requirements.</li><li>Attend client meetings and participate in marketing and business-development activities.</li><li>Build and maintain professional relationships with existing and potential clients.</li><li>Review client enquiries, material requisitions, specifications, and datasheets.</li><li>Source suitable materials and equipment from approved local and international suppliers.</li><li>Prepare and issue RFQs to suppliers and obtain competitive quotations.</li><li>Compare suppliers’ technical and commercial offers and prepare bid comparison sheets.</li><li>Negotiate prices, delivery schedules, payment terms, and other commercial conditions under management guidance.</li><li>Coordinate with suppliers, logistics teams, and clients to ensure timely order processing and delivery.</li><li>Maintain accurate records of enquiries, quotations, purchase orders, supplier information, and client communications.</li><li>Monitor market trends, competitor activities, pricing, and product availability.</li><li>Ensure that supplied materials meet client specifications, applicable industry standards, and quality requirements.</li><li>Provide regular sales and procurement updates to management.</li><li>Perform other sales, procurement, and coordination duties assigned by management.</li></ul>Desired Candidate Profile<ul><li>Bachelor’s degree or diploma in Mechanical Engineering, Petroleum Engineering, Industrial Engineering, Business Administration, Supply Chain Management, or a related field.</li><li>Minimum 2–3 years of relevant experience in sales and/or procurement within the oil and gas industry.</li><li>Practical knowledge of piping materials, valves, fittings, flanges, and related oil and gas products.</li><li>Previous experience in the Qatar or GCC oil and gas market is strongly preferred.</li><li>Basic understanding of technical specifications, material grades, and applicable oil and gas industry standards.</li><li>Experience in preparing quotations, RFQs, purchase orders, and commercial comparison sheets.</li><li>Good communication, negotiation, presentation, and customer-service skills.</li><li>Strong follow-up, coordination, and organizational abilities.</li><li>Proficiency in Microsoft Office applications.</li><li>Ability to work independently and as part of a team.</li><li>Valid Qatar driving licence is an advantage.</li><li>Local hire only. Candidates must currently be available in Qatar.</li></ul>

Bayt

Senior Testing and Commissioning Manager

On-site - Qatar 9 August 2026

Security & Safety

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary Responsible for planning, and directing all Engineering, Technical Support, Testing & Commissioning, Inspection, and Handing over in coordination with the Commissioning Manager and as per company Quality and Customer Care standards of fire and life safety systems. Job Responsibilities 1 Responsible for planning and controlling testing and commissioning work of assigned projects and jobs in process as per the terms of agreement and contract. Making sure that all the requirements with respect to testing, and commissioning aspects of fire and life safety systems of the projects are fully covered and implemented as per the project requirements. Work closely with the FA management team to set and/or implement policies, procedures, and systems and to follow through with implementation. Developing and implementing comprehensive work plans and procedures. Ensure strict compliance with quality, health and safety, and environmental management system Keep logs and report on daily activities to comply with local authorities. Job Responsibilities 2 Develop and follow testing and commissioning procedures and ensure implementation of those procedures through the Commissioning team to comply with local QCDD regulations and international codes and standards Ensure work complies with codes, NFPA standards, Regulations & permits. Ensure strict compliance with quality, health and safety and environmental management system Review the shop drawings and confirm that nothing is missing as per specifications mentioned in the agreement/contracts and other project documents. Engineering at the main office and co-ordinate with technical/engineering team at the main office. Maintain local authority specifications/standards and requirements. Project coordination as necessary, especially the mimic panels, smoke panels, any kind of calculations, schematic diagram, shop drawing, C &E Matrix etc. Additional Responsibilities 3 Job Knowledge & Skills UPDA (engineering registration certificate). QCDD (certified fire engineer). NFPA 72 , NFPA 101 . Fire systems manufacture certification (Carrier Fire System, EST3, EST4, Xtralis, AP sensing). Project software like Auto-cad, and Primavera and advanced level of computer office skills. Job Experience Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus Competencies Build High-Performing Teams Provide Direction Agility AI Fluency Electrical ELV design L4 Electrical lighting design L4 Electrical load diagrams / schedules and calculation L4 Electrical power design L4 Leadership Quality Resilience Voltage drop calculation L4 Education Bachelor's Degree in Electrical Engineering or Engineering </div>

5 to 10 years Naukri Gulf

Senior AI Engineer

On-site - Qatar - Qatar 3 August 2026

Information Technology

We are looking for an experienced AI Engineer to join our team and help design, build, and scale intelligent systems that power real business solutions. You will work across LLMs, Computer Vision, Speech AI, and AI Infrastructure, embedding advanced AI into core business processes and client-facing products.<ul><li>LLM Development: build chatbots, RAG systems, and automated document processing pipelines</li><li>Computer Vision: Implement OCR for insurance documents, damage assessment from photos, and identity verification</li><li>Speech AI: Develop transcription, voice analytics, and multilingual support solutions</li><li>AI Infrastructure: Deploy and monitor AI models, integrate with cloud AI services</li><li>Product Integration: Embed AI into business workflows, create AI APIs, and design user-friendly AI-powered experiences</li></ul>Requirements<ul><li>5+ years of experience in AI/ML engineering with a focus on production systems</li><li>Strong Python skills (advanced) + experience with FastAPI/Flask for API development</li><li>Hands-on experience with LLM tools: OpenAI API, LangChain, Hugging Face Transformers</li><li>Computer Vision expertise: OpenCV, PIL, YOLO, Detectron2 (or similar)</li><li>Deep learning frameworks: PyTorch or TensorFlow for fine-tuning models</li><li>Cloud experience: AWS / Azure / GCP AI services</li><li>Docker & Kubernetes for AI application containerization and orchestration</li></ul>Core AI/ML Competencies<ul><li>Prompt Engineering designing effective prompts for LLMs</li><li>Fine-tuning and training custom LLMs adapting pre-trained models to business tasks</li><li>Experience RAG (Retrieval-Augmented Generation) working with vector DBs and embeddings</li><li>Computer Vision Pipelines from preprocessing to inference</li><li>Model Optimization quantization, pruning, ONNX for faster inference</li><li>Multimodal AI building solutions that combine text + images</li></ul> Desired Candidate Profile5+ years of experience in AI/ML engineering with a focus on production systemsStrong Python skills (advanced) + experience with FastAPI/Flask for API developmentHands-on experience with LLM tools: OpenAI API, LangChain, Hugging Face TransformersComputer Vision expertise: OpenCV, PIL, YOLO, Detectron2 (or similar)Deep learning frameworks: PyTorch or TensorFlow for fine-tuning modelsCloud experience: AWS / Azure / GCP AI servicesDocker & Kubernetes for AI application containerization and orchestrationCore AI/ML Competencies<ul><li>Prompt Engineering designing effective prompts for LLMs</li><li>Fine-tuning and training custom LLMs adapting pre-trained models to business tasks</li><li>Experience RAG (Retrieval-Augmented Generation) working with vector DBs and embeddings</li><li>Computer Vision Pipelines from preprocessing to inference</li><li>Model Optimization quantization, pruning, ONNX for faster inference</li><li>Multimodal AI building solutions that combine text + images</li></ul>

8 to 13 years Naukri Gulf

Lead T&I

On-site - Qatar - Doha 30 July 2026

Engineering

Manage Contractors full pipeline pre commissioning and decommissioning scope from engineering planning through offshore execution and closeout. Review and approve contractors pre commissioning and decommissioning philosophies, execution strategies, and method statements. Coordinate activities related to pipeline pre-commissioning and decommissioning such as Flooding, Cleaning, Gauging, Hydrotesting, Dewatering, Drying and N2 purging whereas for de-commissioning - Pipeline isolation, Depressurization, Flushing, Cleaning, Subsea Pipeline cutting, Pipeline recovery, Abandonment in place, Grouting or capping, Spool removal, Subsea tie-in disconnection. Review contractors engineering calculations for Hydrotest pressure, Test duration, Fill volumes, Pig train configuration, Dewatering flow rates, Drying acceptance criteria, Nitrogen requirements, Compressor capacity, Pump sizing, Temporary equipment requirements. Support engineering teams in defining decommissioning boundaries, pipeline status, contents, and isolation requirements. Ensure contractor's pre commissioning and decommissioning activities are planned in line with SIMOPS, HSE, environmental, and marine requirements. Coordinate with contractors, offshore operations, offshore VMT, diving, ROV, marine, and HSE teams for safe execution. Manage punch lists, technical queries, site queries, and non-conformances related to pipeline pre-commissioning and de commissioning. Act as the office-based focal point for offshore pipeline decommissioning and pre-commissioning activities and support offshore teams with technical guidance, troubleshooting, and decision-making during execution. Provide technical support for offshore changes, deviations, unexpected field conditions and formulating recovery plans including Management of Change.Desired Candidate ProfileBachelor's degree in engineering in mechanical engineering or subsea engineering. 8 years offshore installation experience on vessels in Transport & Installation activities with minimum 1 years as supervisory role in related field. 5 years experience as Field Engineer or site supervisor onboard installation vessels for similar activities with emphasis on decommissioning of subsea facilities. Previous work experience with other major operators or LNG and knowledge of company PTW systems is desirable but not mandatory. Extensive Knowledge in subsea pipeline pre commissioning and de commissioning, pipeline pigging, subsea isolation plugs, subsea decommissioning tools. Demonstrate extensive experience of pre-commissioning vessel supervision and Familiarity with international standards such as DNVST-F101, ASME B31.4, ASME B31.8, API standards, ISO pipeline and offshore standards, any Client-specific offshore standard. Expertise in submarine pipeline decommissioning, including the use of technical plugs (e.g., STATS company isolation plugs) for safe isolation and abandonment. Fluent English. MS Office proficiency. High-pressure environment experience. Problem solving ability. Team collaboration.

12 to 17 years Naukri Gulf

Senior Electrical Engineer

On-site - Qatar - Qatar 3 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Seeking an experienced Senior Electrical Engineer with 12+ years of experience in the supervision, coordination, testing, and commissioning of electrical systems for mission-critical data center projects. The role will be responsible for ensuring the successful delivery of HV/LV power infrastructure, backup power systems, and electrical distribution networks while maintaining compliance with project specifications, industry standards, and operational reliability requirements. Your role Supervise electrical construction activities for data center projects to ensure compliance with approved drawings, specifications, codes, and project requirements. Oversee the installation, testing, and commissioning of HV and LV electrical systems, transformers, switchgear, and power distribution equipment. Monitor the installation and operation of emergency power systems including generators, fuel systems, UPS systems, batteries, and associated controls. Review electrical shop drawings, material submittents, method statements, and technical submissions for compliance with project requirements. Coordinate electrical works with mechanical, civil, structural, architectural, ICT, and specialist vendor installations. Conduct site inspections and quality audits to verify workmanship, installation standards, and material compliance. Supervise installation and testing of earthing, bonding, and lightning protection systems. Monitor cable routing, cable containment systems, power distribution networks, and equipment terminations. Witness factory acceptance tests (FAT), site acceptance tests (SAT), pre-commissioning activities, and performance testing. Review energization procedures and ensure safe execution of electrical system energization activities. Support integrated systems testing (IST), commissioning, and operational readiness activities for mission-critical facilities. Identify and resolve electrical design, construction, and interface issues in coordination with project stakeholders. Ensure contractor compliance with project quality requirements, safety standards, and construction schedules. Review inspection requests, testing records, commissioning reports, and QA/QC documentation. Monitor contractor progress, resource allocation, and productivity, reporting risks and recommending corrective actions when required. Participate in multidisciplinary coordination meetings and provide technical input on electrical engineering matters. Support authority inspections, client witnessing activities, snagging inspections, and final project handover processes. Prepare technical reports, progress updates, non-conformance reports (NCRs), and project status reports for client and consultant management teams.</div></section><section>Desired Candidate ProfileBachelor's degree in Electrical Engineering. UPDA/MMUP Grade A Data Center Experience [ at least 1 project is delivered in the last 5 years] Mandatory. 12+ years of experience. HV/LV systems, transformers, switchgear, generators, UPS, earthing, lightning protection, power distribution, testing, energisation and commissioning. Data centre or mission-critical power systems experience preferred.</section>

10 to 15 years Naukri Gulf

Architect

On-site - Qatar - Qatar 3 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Seeking an experienced Senior Architectural & Fire Life Safety Engineer with 10+ years of experience in architectural supervision, fire and life safety compliance, and multidisciplinary coordination on large-scale, mission-critical developments. The role will be responsible for overseeing architectural and fire safety implementation for data center projects, ensuring compliance with design requirements, Civil Defense regulations, applicable codes, and industry best practices.Your role<ul><li>Lead architectural supervision activities for data center construction projects, ensuring compliance with approved drawings, specifications, and project requirements.</li><li>Monitor architectural finishes, building envelope, façade systems, and external works to ensure quality and compliance standards are achieved.</li><li>Review and inspect fire and life safety installations to ensure conformity with design intent, applicable codes, and Civil Defense requirements.</li><li>Verify proper implementation of fire-rated walls, compartmentation systems, fire stopping materials, penetration sealing, and smoke containment measures.</li><li>Review and monitor escape routes, emergency exits, egress provisions, and occupant safety requirements throughout construction.</li><li>Coordinate with architects, MEP engineers, fire protection specialists, contractors, and authorities to resolve design and site-related issues.</li><li>Interface with Civil Defense and relevant authorities for inspections, approvals, testing, and certification requirements.</li><li>Review contractor submittals, material approvals, shop drawings, and method statements related to architectural and fire safety works.</li><li>Monitor façade and building envelope installations to ensure performance, constructability, and compliance with project specifications.</li><li>Conduct site inspections, quality audits, and compliance reviews, identifying non-conformities and recommending corrective actions.</li><li>Ensure coordination between architectural, structural, MEP, and fire protection systems to avoid clashes and interface issues.</li><li>Support testing, commissioning, integrated systems testing (IST), and readiness assessments related to fire and life safety systems.</li><li>Prepare inspection reports, technical observations, snagging reports, and progress updates for project management and clients.</li><li>Monitor contractor performance and ensure timely closure of architectural and fire safety-related observations.</li><li>Support project handover activities, final inspections, authority approvals, and closeout documentation.</li></ul></div></section><section>Desired Candidate Profile<ul><li>Bachelor's degree in Architecture Engineering, Fire Engineering or equivalent.</li><li>UPDA/MMUP Grade A.</li><li>Fire/life safety & QCDD-related experience.</li><li>Data Center Experience [at least 1 project is delivered in the last 5 years] is preferred.</li><li>10+ years of experience.</li><li>Architectural supervision, fire/life safety coordination, compartmentation, fire stopping, escape routes, Civil D fense interfaces, facade/envelope coordination and compliance review for complex buildings or data centres.</li></ul></section>

10 to 15 years Naukri Gulf

Materials Engineer

On-site - Qatar - Qatar 2 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">To Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome.To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection.Report item wise visual, dimensional, quantities with UOM in the Inspection report with clear status (Accepted / Rejected) identified. Shall be able to justify the reasons for rejections to raise complaint Notifications to suppliers.Shall be responsible for segregation of accepted / rejected / Quarantine Materials after physical Inspection of materialsEnsure proper tracking systems are followed to keep the records of Inspection documents and retrieval when required.Ensure resolution of Certification CNR in co-ordination with stake holders and release of accepted materials from SAP Quality Blocks as applicable.Independently responsible for Materials Inspected. Shall be able to justify queries / rejections from warehouses or end users and resolve the issues.Carry out Preservation Inspection and old stock material Inspection as required from time to time and submit Inspection reports.Shall be able to Drive the Car and make inspection visits to the Warehouse locations as directed.Responsible for housekeeping of Inspection area in compliance to HSE regulations.Adhere to section work instructions / guidelines to perform the inspection activities.Prepare section weekly / monthly reports and submit to Sr. Material Engineer (Insp)</div></section><section>Desired Candidate ProfileBachelor's degree or higher in an Engineering under respective discipline (Mechanical / Electrical / Instrumentation).A minimum of 10 years' experience in Plant Maintenance (Oil & Gas, Chemical or Petro-chemical) or technical evaluation of materials out of which minimum of 6 years' experience in oil and gas / Allied Process Industry.Exposure to supply chain environment is preferable.Experience in Technical evaluation of Mechanical / Electrical Spares, Pipeline Components, Consumables is required.General knowledge of process system, Equipment & Materials used in Refineries and the Oil & gas Industry. Shall have good practical skills, and hands-on experience in Procurement, engineering, construction, maintenance.Knowledge and Experience in reviewing Engineering drawings, process data sheets, parts list, Certificates, Spare Parts Interchangeability Record (SPIR) and Manufacture Catalogues.Knowledge of Engineering and International Standards.Shall be Computer literate with specific knowledge of Material Equipment/Spare Parts cataloguing systems (Shell or SAP) and Microsoft Office applications.Capability to understand and follow international safety standard followed in Oil & Gas industry.IOSH certificate Managing Safely or equivalent is mandatorily required prior to start working.</section>

10 to 15 years Naukri Gulf

Materials Engineer

On-site - Qatar - Qatar 16 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">To inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conduct the inspection outcome.To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the inspection.Report item wise visual, dimensional, quantitative with UOM in the Inspection report with clear status (Accepted / Rejected) identified.Shall be able to justify the reasons for rejections or take complaint notifications to suppliers.Shall be responsible for segregation of accepted/rejected / Quarantine Materials after Physical Inspection of materials.Ensure proper tracking systems are followed to keep the records of Inspection documents and retrieval when required.Ensure resolution of Certification CNR in co-ordination with stakeholders and release of accepted materials for SAP Quality Blocks as applicable.Independently responsible for Materials inspected. Shall be able to justify queries / rejections from warehouses or end users and resolve the issues.Carry out Preservation Inspection and of stock material Inspection as required from time to time and submit inspection reports.Shall be able to Drive the Car and make inspection visits to the Warehouse locations as directed.Responsible for housekeeping of Inspection area in compliance to HSE regulations.Adhere to section work / guidelines to perform the inspection activities.Prepare section weekly / monthly reports and submit to Sr. Material Engineer (Insp)</div></section><section>Desired Candidate ProfileBachelor's degree or higher in Engineering under respective discipline (Mechanical / Metallurgy / Electrical & Instrumentation).A minimum of 10 years' experience in QA/QC & Inspection environment with a minimum of 6 years' experience with Oil & Gas / Allied process industry out of which at least 5 years should be relevant to Materials Inspection.Knowledge of General Engineering Practices / International Codes & Standards.Well-versed and thorough knowledge in relevant International Standards API, ASME, ISO, NEMA, IEEE, IEC, NFPA, BASEEFA, ATEX, ANSI, ASTM, TEMA, BS and related codes / standards / specifications & statutory regulations.Able to understand and interpret Company specifications & regulations required to deliver the job function effectively.Good command of certification requirements for various materials and plant equipment.Capable of interpreting technical drawings, data sheets and specifications.Good written and spoken English, problem-solving skills, technical communication and interpersonal skills.Should have a valid driving license.Capability to understand and follow international safety standards in the Oil & Gas industry. IOSH certificate Managing Safely or equivalent is mandatorily required prior to starting work with Company.</section>

Full Time Gulf Talnet

O&M Mechanical & Electrical Technician

On-site - Qatar - Qatar 14 June 2026

Engineering

Job Overview We are looking for a skilled and versatile Mechanical / Electrical Technician to join our Operations & Maintenance team. This role is responsible for the daily hands-on maintenance, troubleshooting, and repair of critical water treatment systems, including Sewage Treatment Plants (STP), Reverse Osmosis (RO) systems, water softeners, and UV disinfection facilities. A significant portion of this role involves servicing medical and hospital environments, requiring a high level of reliability, attention to hygiene standards, and the ability to maintain critical ultrapure water systems without disrupting facility operations. Key Responsibilities 1. Preventive & Corrective Maintenance Equipment Maintenance: Perform routine preventive and corrective maintenance on all mechanical and electrical components (pumps, valves, blowers, dosing systems, and control panels). System Troubleshooting: Swiftly diagnose and repair mechanical breakdowns and electrical faults to minimize system downtime. Specialized Water Treatment Operations: Execute Clean-in-Place (CIP) chemical cleaning procedures for RO membranes, recharge/backwash water softeners, and replace UV lamps and quartz sleeves. 2. Hospital & Medical Facility Compliance Ultrapure Water Oversight: Monitor, maintain, and log parameters for medical-grade and ultrapure water systems, ensuring strict compliance with hospital and healthcare water quality standards. Safety & Hygiene: Adhere to rigorous infection control, health, safety, and environmental standards required when working inside active medical facilities and wastewater plants. 3. Site Logs & Reporting Data Tracking: Maintain accurate daily logs of water quality parameters, chemical consumption, pressure differentials, and maintenance work orders. Team Coordination: Work closely with the O&M Engineer / Coordinator to report site conditions, spare parts requirements, and potential operational risks.Job Requirements & Qualifications Experience: 3–5+ years of hands-on technical experience maintaining water treatment systems (RO, STP, Softeners, UV) with clear exposure to medical, hospital, or pharmaceutical environments. Education/Certification: Diploma or technical certification in Mechanical, Electrical, or Electro-Mechanical Engineering (or equivalent trade experience). Technical Competencies: Electrical: Ability to read electrical drawings, troubleshoot control circuits, test relays, and work safely with 3-phase power, motors, and PLC panels. Mechanical: Strong plumbing, piping, and mechanical repair skills (shaft alignments, seal replacements, pump overhauls). Process: Solid understanding of CIP protocols and water softening cycles. Attributes: High reliability, disciplined adherence to safety protocols, and a clean, professional demeanor suitable for customer-facing medical environments. Availability: Willingness to participate in an on-call rotation for emergency service responses.

Full Time Gulf Talnet

O&M Engineer/ Coordinator

On-site - Qatar - Qatar 12 June 2026

Engineering

We are seeking a highly skilled and dynamic Senior O&M Engineer / Coordinator with 5 to 7+ years of hands-on experience in water and wastewater treatment operations. In this role, you will oversee the operations and maintenance (O&M) of critical water systems, including Sewage Treatment Plants (STP), Reverse Osmosis (RO) systems, and Medical Ultrapure Water Treatment plants. The ideal candidate will bridge the gap between technical excellence and client relationship management—ensuring strict adherence to contractual deliverables, managing resources efficiently, and driving business growth through outstanding customer service and sales support. Key Responsibilities 1. Operations & Contractual Management O&M Planning: Develop, implement, and optimize comprehensive O&M plans, standard operating procedures (SOPs), and preventive maintenance schedules. Contract Compliance: Thoroughly identify, monitor, and deliver all contractual obligations and Key Performance Indicators (KPIs). Resource Management: Manage on-site technicians, operators, and resources to ensure 24/7 smooth facility operations and optimal chemical/energy consumption. 2. Technical Expertise & Maintenance System Oversight: Oversee the daily performance of STPs, RO systems, and Medical Ultrapure Water assets. Hands-on Troubleshooting: Apply strong mechanical and electrical maintenance knowledge to diagnose and resolve equipment failures swiftly. Process Optimization: Execute Clean-in-Place (CIP) processes, membrane optimization strategies, and oversee the maintenance of water softeners and UV disinfection systems. 3. Client Relations & Business Growth Customer Service: Act as the primary point of contact for clients, managing expectations with a proactive, customer-focused attitude. Retention & Expansion: Maintain high client satisfaction to retain existing contracts and identify upsell opportunities to expand business revenue. Sales Support: Assist the commercial team by conducting technical site visits, contributing to technical proposals, and leveraging operational insights to win new businessExperience: 5–7+ years of direct experience in the operation and maintenance of Water & Wastewater Treatment plants (specifically RO, STP, and Medical Ultrapure Water). Education: Bachelor’s degree in Chemical, Mechanical, Electrical, or Environmental Engineering, or a related technical discipline. Technical Skills: * Deep understanding of RO membrane optimization and CIP processes. Proficiency in troubleshooting mechanical (pumps, valves) and electrical (PLCs, control panels) systems. Familiarity with UV disinfection systems and water softening technologies. Soft Skills: Outstanding communication, leadership, and negotiation skills with a proven track record in client-facing roles. Commercial Acumen: Ability to understand contracts, manage budgets, and support sales/proposal development.

Bayt

Foreman(Rigger)

On-site - Qatar Tuesday

Technical & Labor

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Reporting structure Reports To     Head of Piping Production Workshop Direct Reports Rigging Supervisor Job Summary and Purpose As a Subject Matter Expert (SME), the Rigging Foreman [Workshop & Project - Rigging & Movement Logistics] provides the technical & technological problem-solving ability of production engineering process and planning abilities in order to lead work teams and control production process for material handling, movement and coordination of piping systems and their components between workshops. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing safe material lifts and movements of piping systems between workshops and projects. Accountabilities Key Accountabilities: 1.    Specialize for critical lifting and rigging activities including arranging of crane and forklift service. 2.    Responsible for all pipe shop & onboard piping logistics such as pipe and material movements. 3.    Leads a rigging group, that ensure loads are secure, lifted according to yard safety standards 4.    Coordinates with crane operator to ensure work schedules are not interrupted. All crane lifts need to ensure materials are on location before work starts. 5.    Coordinate for forklift operation to shift pipes. 6.    Coordinate with Production Engineer (in charge) for sending pipe for coating (blast/paint/galvanize) 7.    Coordinate with transport section to arrange transport for outside yard operations i.e., galvanizing and afloat service. 8.    Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way.  9.    Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate  10.    Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt & Project Postmortem) after completion of vessels. Accountabilities - 2 11.    Foster an engaging culture of safe and productive work through role modelling N-KOM's values. 12.    Prepare fit for purpose work Permits & Risk Assessments for the identification, control and/or mitigation of workplace risk. 13.    Review and update the section Risk Assessments/Environmental Aspects & Impacts as per the latest safe practice and get approval from piping manager. 14.    Apply mathematics and statistics to model production systems during decision making process. 15.    Design, implement and refine products, services, processes, and systems taking in consideration any constraints and local nuances whether supplier, buyer, substitutes, or new emerging information. 16.    Apply appropriate knowledge to design, redesign or improve product & service functionality. Drive and implement process improvements to reduce assembly hours and build cost. 17.    Apply concepts and quality techniques throughout the entire production process & system and deploy organizational standards for control proceedings and auditing. 18.    Stay up to date with technological developments, enabling them to enterprises and society. 19.    Manage and optimize flow (information and production flow). Competencies Achievement Oriented Collaboration and Teamwork Customer Centricity Drive_Vision Empower and Nurture Talent Interactive_Communication Solution_Oriented Key Result Areas •    Productivity - Set & drive KPI •    Safety - foster zero harm culture •    Quality - implement zero reword principles •    Cost - reduced rework and enable timely delivery   Interactions and Working Relations Internal: Piping Section & All Sections in NKOM Purpose: To Educate Pipe Shop Team towards Safety, Health, Environment, Quality & Security. To implement SHEQS Requirements with in Pipe Shop Team.                                  To Educate Pipe Shop Team about IMS. To Supervise & Perform the Assigned works to Pipe Shop Team.     External: Clients, Sub-Contractors, Service Engineers & Surveyors. Purpose: To understand client requirements, update job status. To understand the Sub contractors / Service engineer requirements and to arrange accordingly. For inspection of Piping Items Financial Authorities •    As per TOFA. Qualifications, Experience and Job Skills Qualifications: A Diploma in Mechanical, or equivalent working experience and Qualified as Rigging Supervisor in Shipyard and Offshore & Onshore Projects. Experience: At least 8 years’ relevant working experience Lead in Shipyard Rigging & Lifting.  (at least 3 years of experience as Assistant Rigging Foreman role). Job Specific Competencies: i. Behavioral •    Drive Vision •    Interactive Communication •    Customer Centricity •    Solution Oriented •    Empower & Nurture Talents •    Collaboration & Teamwork •    Achievement Oriented ii.  Technical •    Isometric Drawing Interpretation Skill •    Piping and Instrumentation Diagram (P&ID) Drawing Interpretation Skill •    General Arrangement (GA) Drawing Interpretation Skill •    Knowledge of the Marine Piping System  •    Knowledge of material standards such as American Society for Testing and Materials (ASTM),  American National Standards Institute (ANSI),  Japanese Industrial Standards (JIS),  American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), etc. •    Knowledge of lifting gears  •    Knowledge of mode of transportation and lifting equipment’s •    Knowledge of the heavy lifting, logistics and transportation •    Drawing skill for International Organization for Standardization (ISO) and General Arrangement (GA) •    Knowledge of Drawing symbols.   </div>

Bayt

Site Architect (BIM)

On-site - Qatar Tuesday

Construction & Real Estate

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property & buildings, and transportation sectors. About the Role We are looking for a Site Architect to work under the Programme Management Business Group, providing project management and construction supervision services. The Site Architect will assist the Project Manager and/or Resident Engineer in administering the day-to-day operational activities of the project. The role will include the review and processing of architectural submittals by contractors, including design documents, prequalification submissions, material proposals, shop drawings, method statements, construction drawings, RFIs and as-built documentation. The Site Architect will also undertake site inspections and continuous surveillance of assigned architectural and interior works to verify compliance with approved drawings, specifications, applicable codes, quality requirements, construction schedules, and health and safety requirements. Non-conformances shall be documented, and the Site Architect may participate in identifying and implementing appropriate resolutions.  Responsibilities  <ul><li>Lead architectural coordination with other disciplines and support the Project Manager and/or Resident Engineer in performing contractual duties on site. </li><li>Assist with the processing of contract documents and contract administration activities related to architectural works. </li><li>Develop, modify, review, correct and update architectural production drawings, construction documents and design information, as required. </li><li>Advise the Project Manager on technical matters relating to architectural and interior works that may affect construction progress, quality, cost, safety or programme. </li><li>Review and process architectural shop drawings, technical submittals, material proposals, prequalification submissions, method statements, RFIs, as-built drawings and other construction submissions from project inception through close-out using Rivit / BIM is mandatory. </li><li>Review contractor shop drawings against the approved design and tender drawings (BIM model) to verify clash free compliance with the design intent, specifications and project requirements, and provide appropriate recommendations or comments. </li><li>Review proposed architectural materials and subcontractors from a technical standpoint and advise the Project Manager on their suitability and compliance. </li><li>Provide practical resolutions to architectural and multidisciplinary technical issues and coordinate the implementation of agreed solutions to maintain progress on site. </li><li>Monitor architectural and interior works, including finishes, fit-out works and associated interfaces, for compliance with approved documents, quality standards and contractual requirements. </li><li>Undertake site observations, work inspections and material inspections to verify the contractor’s compliance with approved shop drawings, consultant specifications, good construction practice, programme requirements, and health and safety procedures. </li><li>Monitor procurement and delivery of architectural materials to support timely execution of construction activities. </li><li>Lead and coordinate architectural snagging and de-snagging activities to support completion and handover. </li><li>Attend project, progress, coordination and technical meetings as directed by the Project Manager and prepare draft site or engineer’s instructions when required. </li><li>Provide technical input to the Project Manager regarding architectural variations and related contractor claims. </li><li>Oversee architects and inspectors responsible for architectural works and verify that construction and installation activities comply with contractual obligations and quality control requirements. </li><li>Apply and monitor project quality control procedures for construction supervision activities and identify opportunities for improvement. </li><li>Coordinate with construction management to identify and eliminate hazards associated with architectural works that may affect the environment or the health and safety of personnel. </li><li>Review and interpret architectural drawings and specifications to confirm that the latest revisions are being used and that works are technically executed correctly. </li><li>Perform other responsibilities associated with the position, as may be appropriate. </li><li>Degree in Architecture or a related field. </li><li>Minimum of 12 years of postgraduate experience, including at least 5 years of relevant experience in architectural design review and construction supervision on large projects. </li><li>Strong technical knowledge and the ability to resolve architectural design and construction issues on site. </li><li>Good knowledge of applicable building codes, Qatar Construction Specifications, and relevant Qatar authority requirements. </li><li>Relevant professional or authority registration in Qatar is preferred. </li><li>Ability to manage and coordinate specialised architectural activities, multidisciplinary interfaces, and a team of moderate size and complexity. </li><li>Proficiency in AutoCAD, Revit, SketchUp or 3ds Max, Photoshop, MS Project or Primavera, PowerPoint, and the Microsoft Office suite. </li><li>Ability and willingness to undertake coordinated design reviews in a Revit/BIM environment. </li><li>Flexibility to work in a multi-project environment. Experience & Qualifications </li><li>Degree in Architecture or a related field. </li><li>Minimum of 12 years of postgraduate experience, including at least 5 years of relevant experience in architectural design review and construction supervision on large projects. </li><li>Strong technical knowledge and the ability to resolve architectural design and construction issues on site. </li><li>Good knowledge of applicable building codes, Qatar Construction Specifications, and relevant Qatar authority requirements. </li><li>Relevant professional or authority registration in Qatar is preferred. </li><li>Ability to manage and coordinate specialised architectural activities, multidisciplinary interfaces, and a team of moderate size and complexity. </li><li>Proficiency in AutoCAD, Revit, SketchUp or 3ds Max, Photoshop, MS Project or Primavera, PowerPoint, and the Microsoft Office suite. </li><li>Ability and willingness to undertake coordinated design reviews in a Revit/BIM environment. </li><li>Flexibility to work in a multi-project environment.</li></ul> Why Join Us? <ul><li>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions.</li><li>Join a team that values knowledge-sharing, mentorship, and professional excellence.</li></ul>Our Pledge to You At GHD, we don’t just believe in the power of commitment, we live and breathe it every day. That’s why we pledge to empower our people to make a positive impact. Combining our deep technical expertise with the capabilities of our clients and partners, we respond to some of the most complex challenges facing our planet today. See where your commitment could take you. That’s the #PowerOfCommitment </div>

Bayt

Site Architect (BIM)

On-site - Qatar Tuesday

Construction & Real Estate

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property & buildings, and transportation sectors. About the Role We are looking for a Site Architect to work under the Programme Management Business Group, providing project management and construction supervision services. The Site Architect will assist the Project Manager and/or Resident Engineer in administering the day-to-day operational activities of the project. The role will include the review and processing of architectural submittals by contractors, including design documents, prequalification submissions, material proposals, shop drawings, method statements, construction drawings, RFIs and as-built documentation. The Site Architect will also undertake site inspections and continuous surveillance of assigned architectural and interior works to verify compliance with approved drawings, specifications, applicable codes, quality requirements, construction schedules, and health and safety requirements. Non-conformances shall be documented, and the Site Architect may participate in identifying and implementing appropriate resolutions.  Responsibilities  <ul><li>Lead architectural coordination with other disciplines and support the Project Manager and/or Resident Engineer in performing contractual duties on site. </li><li>Assist with the processing of contract documents and contract administration activities related to architectural works. </li><li>Develop, modify, review, correct and update architectural production drawings, construction documents and design information, as required. </li><li>Advise the Project Manager on technical matters relating to architectural and interior works that may affect construction progress, quality, cost, safety or programme. </li><li>Review and process architectural shop drawings, technical submittals, material proposals, prequalification submissions, method statements, RFIs, as-built drawings and other construction submissions from project inception through close-out using Rivit / BIM is mandatory. </li><li>Review contractor shop drawings against the approved design and tender drawings (BIM model) to verify clash free compliance with the design intent, specifications and project requirements, and provide appropriate recommendations or comments. </li><li>Review proposed architectural materials and subcontractors from a technical standpoint and advise the Project Manager on their suitability and compliance. </li><li>Provide practical resolutions to architectural and multidisciplinary technical issues and coordinate the implementation of agreed solutions to maintain progress on site. </li><li>Monitor architectural and interior works, including finishes, fit-out works and associated interfaces, for compliance with approved documents, quality standards and contractual requirements. </li><li>Undertake site observations, work inspections and material inspections to verify the contractor’s compliance with approved shop drawings, consultant specifications, good construction practice, programme requirements, and health and safety procedures. </li><li>Monitor procurement and delivery of architectural materials to support timely execution of construction activities. </li><li>Lead and coordinate architectural snagging and de-snagging activities to support completion and handover. </li><li>Attend project, progress, coordination and technical meetings as directed by the Project Manager and prepare draft site or engineer’s instructions when required. </li><li>Provide technical input to the Project Manager regarding architectural variations and related contractor claims. </li><li>Oversee architects and inspectors responsible for architectural works and verify that construction and installation activities comply with contractual obligations and quality control requirements. </li><li>Apply and monitor project quality control procedures for construction supervision activities and identify opportunities for improvement. </li><li>Coordinate with construction management to identify and eliminate hazards associated with architectural works that may affect the environment or the health and safety of personnel. </li><li>Review and interpret architectural drawings and specifications to confirm that the latest revisions are being used and that works are technically executed correctly. </li><li>Perform other responsibilities associated with the position, as may be appropriate. </li><li>Degree in Architecture or a related field. </li><li>Minimum of 12 years of postgraduate experience, including at least 5 years of relevant experience in architectural design review and construction supervision on large projects. </li><li>Strong technical knowledge and the ability to resolve architectural design and construction issues on site. </li><li>Good knowledge of applicable building codes, Qatar Construction Specifications, and relevant Qatar authority requirements. </li><li>Relevant professional or authority registration in Qatar is preferred. </li><li>Ability to manage and coordinate specialised architectural activities, multidisciplinary interfaces, and a team of moderate size and complexity. </li><li>Proficiency in AutoCAD, Revit, SketchUp or 3ds Max, Photoshop, MS Project or Primavera, PowerPoint, and the Microsoft Office suite. </li><li>Ability and willingness to undertake coordinated design reviews in a Revit/BIM environment. </li><li>Flexibility to work in a multi-project environment. Experience & Qualifications </li><li>Degree in Architecture or a related field. </li><li>Minimum of 12 years of postgraduate experience, including at least 5 years of relevant experience in architectural design review and construction supervision on large projects. </li><li>Strong technical knowledge and the ability to resolve architectural design and construction issues on site. </li><li>Good knowledge of applicable building codes, Qatar Construction Specifications, and relevant Qatar authority requirements. </li><li>Relevant professional or authority registration in Qatar is preferred. </li><li>Ability to manage and coordinate specialised architectural activities, multidisciplinary interfaces, and a team of moderate size and complexity. </li><li>Proficiency in AutoCAD, Revit, SketchUp or 3ds Max, Photoshop, MS Project or Primavera, PowerPoint, and the Microsoft Office suite. </li><li>Ability and willingness to undertake coordinated design reviews in a Revit/BIM environment. </li><li>Flexibility to work in a multi-project environment.</li></ul> Why Join Us? <ul><li>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions.</li><li>Join a team that values knowledge-sharing, mentorship, and professional excellence.</li></ul>Our Pledge to You At GHD, we don’t just believe in the power of commitment, we live and breathe it every day. That’s why we pledge to empower our people to make a positive impact. Combining our deep technical expertise with the capabilities of our clients and partners, we respond to some of the most complex challenges facing our planet today. See where your commitment could take you. That’s the #PowerOfCommitment </div>

Full Time

HSE Trainer

On-site - Qatar - Doha 25 June 2026

Customer Service

Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions. Always oriented towards technological innovation, the company’s purpose is “Engineering for a sustainable future”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than 50 countries around the world and employs about 30,000 people of over 130 nationalities. Purpose of the position: As HSE Trainer, you will respond to the Project HSE Manager and be part of the HSE Department within COMP2 Project. You will support the development and delivery of health, safety, and environment training programs to employees, subcontractors, and vendors to ensure compliance with regulations and promote a safe workplace. How can you support us? Here are your responsibilities: Deliver HSE trainings both onshore and offshore. Prepare and maintain training reports. Guide the HSE Engineer in preparing weekly and monthly reporting. Ensure training programs and qualifications align with Saipem and QELNG requirements. Act as deputy for the Training HSE Coordinator during absence. What are we looking for? Education: Internationally recognized qualification in HSE & valid training certificate. Experience Minimum 5 years’ proven experience as an HSE/SHES Trainer. Experience in Saipem and/or QELNG projects will be considered a plus. Languages: Fluent in English & fluency in Hindi will be considered a plus. Qualification And Skills Strong knowledge of HSE standards and training methodologies. Ability to deliver training to diverse audiences onshore and offshore. Skilled in reporting and documentation. Medically fit to work in offshore environments. What Can We Offer To You Permanent Contract – Project Based Position Comprehensive Corporate Benefits Package One Saipem Way soft skills model: fostering career growth, innovation, collaboration, and continuous development Location: Qatar – Site Additional Information We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form! We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress. Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem. Find out more on our career page here One vision, many paths, limitless possibilities. PRIVACY POLICY In accordance with the Qatar's Personal Data Privacy Protection Law (PDPPL) enacted as Law No. 13 of 2016 (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D. Lgs 196/03 and art 13 GDPR 679/16).

Full Time LinkedIn

Security Operation

On-site - Qatar - Doha 3 June 2026

Information Technology

Job Title: Security Operations Officer-Data Security Role Overview We are looking for an experienced Data Security Engineer to design, implement, and manage enterprise-wide data protection strategies across on-premise and multi-cloud environments. This role will focus on securing sensitive data, ensuring regulatory compliance, and embedding security and privacy controls across the data lifecycle, including emerging AI-driven systems. Key Responsibilities 1. Data Security Engineering Design and implement data protection controls across enterprise systems, cloud environments, and AI solutions Deploy and manage solutions such as Data Loss Prevention (DLP), data masking, and tokenization Collaborate with application and infrastructure teams to integrate security into the data lifecycle Implement and manage data discovery and classification tools to identify sensitive data Continuously monitor data security posture and generate compliance and risk reports Support incident response by investigating and responding to data breaches and insider threats 2. Cloud Data Security Implement and manage data security controls in Google Cloud Platform (GCP) and Microsoft Azure Secure databases, data lakes, and cloud-native storage solutions Configure encryption at rest, in transit, and in use, including BYOK (Bring Your Own Key) strategies Deploy cloud-native data discovery and classification solutions Manage secrets management systems and ensure secure data access Implement governance and protection controls for AI/ML data environments 3. Cryptography Define and enforce enterprise cryptographic standards and key management practices Manage encryption strategies for data across all states (at rest, in transit, in use) Ensure compliance with industry and organizational cryptographic standards 4. Data Privacy Ensure compliance with global privacy regulations such as GDPR, HIPAA, and PDPPLEmbed privacy-by-design principles into technical implementations Drive enterprise data classification and governance initiatives to protect sensitive data 5. Database Security Secure structured and unstructured databases including relational and NoSQL systems Implement Database Activity Monitoring (DAM) and enforce user access controls Conduct regular security reviews, vulnerability assessments, and system hardening 6. Collaboration & Governance Collaborate with cross-functional teams on data protection strategies Ensure compliance with Qatar NCSA framework and international standards Conduct vendor and third-party data security assessments Review and approve data-sharing agreements Define and track data security KPIs and metrics Maintain dashboards for continuous monitoring and reporting Stay updated on emerging threats, tools, and best practices Qualifications Bachelor’s degree in Computer Science, Information Security, or related field8+ years of experience in information security with a focus on data protection, cryptography, and database security Experience working in multi-cloud environments (GCP & Azure preferred) Bilingual (Arabic speaker) preferred Certifications (Preferred) CISSP, CCSP, CDPSE, CCSKCloud Security Certifications (GCP / Azure / AWS Security Specialty) Required Skills Hands-on experience with DLP solutions (Forcepoint, Microsoft Purview, Google Cloud DLP) Strong expertise in data masking, tokenization, anonymization, and pseudonymization techniques Experience with data discovery and classification tools (Forcepoint, Microsoft Purview) Proficiency in Database Activity Monitoring tools (Imperva, IBM Guardium) Strong knowledge of cryptographic protocols and Key Management Systems (KMS) Experience securing relational, NoSQL, and data lake environments Expertise in database vulnerability assessments and security audits Hands-on experience with secrets management tools (Hashi Corp Vault, Azure Key Vault, GCP Secret Manager, AWS Secrets Manager) Familiarity with integrating security into CI/CD pipelines

Bayt

Lead Commissioning Engineer

On-site - Qatar Thursday

Security & Safety

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary Responsible for planning and directing all Engineering, Technical Support, Testing & Commissioning, Inspection, and Handing over in coordination with the Commissioning Manager and as per company Quality and Customer Care standards of fire and life safety systems. Job Responsibilities 1 Responsible for planning and controlling testing and commissioning work of assigned projects and jobs in process as per the terms of agreement and contract. Ensure that all the requirements concerning testing and commissioning aspects of fire and life safety systems of the projects are fully covered and implemented as per the project requirements. Work closely with the FA management team to set and/or implement policies, procedures, and systems and to follow through with implementation. Developing and implementing comprehensive work plans and procedures. Ensure strict compliance with quality, health and safety, and environmental management systems. Keep logs and report on daily activities to comply with local authorities. Develop and follow testing and commissioning procedures and ensure implementation of those procedures through the Commissioning team to comply with local QCDD regulations and international codes and standards. Job Responsibilities 2 Ensure work complies with codes, NFPA standards, Regulations & permits. Ensure strict compliance with quality, health and safety and environmental management system Review the shop drawings and confirm that nothing is missing as per specifications mentioned in the agreement/contracts and other project documents. Engineering at the main office and co-ordinate with technical/engineering team at the main office. Maintain local authority specifications/standards and requirements. Project coordination as necessary, especially the mimic panels, smoke panels, any kind of calculations, schematic diagram, shop drawing, C &E Matrix etc. Provide complete solution, System Design, and Configuration to the Customer/ Client Coordinate continuously with the commissioning manager and wherever necessary take required measures to complete maintenance and other required services. Active involvement in data gathering for engineering/automation reports and root cause analysis Additional Responsibilities 3 Job Knowledge & Skills UPDA (engineering registration certificate). QCDD (certified fire engineer). NFPA 72 , NFPA 101 . Fire systems manufacture certification (Carrier Fire System, EST3, EST4, Xtralis, AP sensing). Project software like Auto-cad, and Primavera and advanced level of computer office skills. Job Experience 7+ years’ experience in fire and life safety systems in a commissioning environment. 5+ years’ GCC experience (preferred) Competencies Agility AI Fluency Electrical ELV design L3 Electrical lighting design L3 Electrical load diagrams / schedules and calculation L3 Electrical power design L3 Leadership Quality Resilience Voltage drop calculation L3 Education Bachelor's Degree in Electrical Engineering or Mechanical Engineering </div>

5 to 10 years Naukri Gulf

Senior Software Engineer, AI Operations

On-site - Qatar - Qatar Monday

Engineering

Role Overview As a Senior Software Engineer, AI Ops at Scale AI, you will own the long-term technical health, performance, and stability of AI solutions deployed across our strategic public sector partners. While our Delivery Teams build and launch new use cases, you are the technical steward ensuring these deployments operate with Operational Excellence. You will bridge software engineering, MLOps, and client governance, managing tiered SLAs, tracking model drift, and executing maintenance protocols that protect both system integrity and operational margins. Key Responsibilities Handover Gate & Onboarding: Act as the technical gatekeeper during the formal transition from Delivery to Maintenance. Conduct deep-dive reviews to ensure baseline code, prompts, and architecture meet strict maintainability and documentation standards before sign-off. Tiered SLA & Incident Management: Own technical response and resolution targets across multi-tiered service models (from Business-Hours Essential to 24/7 Mission-Critical). Lead Incident Governance, Root Cause Analysis (RCA), and P1/P2 mitigations within strict active support windows. AI Lifecycle Governance: Monitor production model performance, latency, and data drift. Manage prompt configuration repositories to maintain behavioral consistency and perform regression testing when LLM providers update underlying endpoints. Request Classification & Technical Scope: Operationalize the boundary between Routine Maintenance (In-Scope) and System Evolution (Out-of-Scope). Assess incoming client requests and run comparative benchmarking on new AI models. Automation & Reliability Engineering: Eliminate operational toil by engineering self-healing data pipelines, automated RAG indexing syncs, and telemetry tooling. Influence upstream "Delivery" teams to adopt architectural patterns that simplify ongoing maintenance. Client Technical Interface: Serve as the senior technical point of contact for government and enterprise IT leads. Translate technical AI concepts (data drift, prompt versioning, API deprecation) into clear business impacts for non-technical stakeholders.Desired Candidate ProfileIdeally you'd have Background: 5+ years in Software Engineering, MLOps, SRE, or Forward Deployed Engineering in heavy data or production AI environments. Technical Stack: Advanced proficiency in Python, SQL, REST/gRPC APIs, and cloud architecture (AWS, Azure, or GCP). Hands-on experience with MLOps tooling, vector databases, and LLM orchestration frameworks (e.g., LangChain, LlamaIndex). AI Governance Expertise: Practical understanding of prompt version control, model benchmarking against evaluation datasets, RAG pipeline mechanics, and data drift detection. Engineering Mindset: A drive to build systematic, automated fixes rather than applying temporary patches. Strong grasp of CI/CD for machine learning pipelines. Client Acumen & Boundary Control: Strong technical communication skills with the ability to manage client expectations, defend operational boundaries (Maintenance vs. Evolution), and advise on long-term system roadmaps.

Full Time 8 to 15 years Naukri Gulf

Foreman (Rigger)

On-site - Qatar - Al Khor 23 August 2026

Research & Development

<ul><li>As a Subject Matter Expert (SME), the Rigging Foreman [Workshop & Project Rigging & Movement Logistics] provides the technical & technological problem-solving ability of production engineering process and planning abilities in order to lead work teams and control production process for material handling, movement and coordination of piping systems and their components between workshops. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing safe material lifts and movements of piping systems between workshops and projects.</li><li>Specialize for critical lifting and rigging activities including arranging of crane and forklift service.</li><li>Responsible for all pipe shop & onboard piping logistics such as pipe and material movements.</li><li>Leads a rigging group, that ensure loads are secure, lifted according to yard safety standards</li><li>Coordinates with crane operator to ensure work schedules are not interrupted. All crane lifts need to ensure materials are on location before work starts.</li><li>Coordinate for forklift operation to shift pipes.</li><li>Coordinate with Production Engineer (in charge) for sending pipe for coating (blast/paint/galvanize)</li><li>Coordinate with transport section to arrange transport for outside yard operations i.e., galvanizing and afloat service.</li><li>Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way.</li><li>Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate</li><li>Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt & Project Postmortem) after completion of vessel</li></ul>Desired Candidate ProfileDiploma in Mechanical, or equivalent working experience and Qualified as Rigging Supervisor in Shipyard and Offshore & Onshore Projects. Experience: At least 8 years’ relevant working experience Lead in Shipyard Rigging & Lifting.  (at least 3 years of experience as Assistant Rigging Foreman role).

Printing Engineer Jobs in Qatar

Welder

Transportation & Installation Lead

Junior Sales & Procurement Engineer – Oil & Gas Materials & Equipment

Senior Testing and Commissioning Manager

Senior AI Engineer

Lead T&I

Senior Electrical Engineer

Architect

Materials Engineer

Materials Engineer

O&M Mechanical & Electrical Technician

O&M Engineer/ Coordinator

Foreman(Rigger)

Site Architect (BIM)

Site Architect (BIM)

HSE Trainer

Security Operation

Lead Commissioning Engineer

Senior Software Engineer, AI Operations

Foreman (Rigger)

Site Owners

Employers

Job Seekers

Printing Engineer Jobs in Qatar

Receive email alerts for Printing Engineer Jobs in Qatar jobs