Printing Engineer Jobs - Doha Qatar

About Us<br><br>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.<br><br>Job Responsibility<br><br>Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Supports the processes for checking, peer reviews, and incorporation of comments and findings. Ensure recognised onshore & offshore engineering practices applicable to process design are adopted. Prepares design specifications for process works. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, recommends improvements, and takes action where required. Provide technical support within the discipline team, liaise with the project team, and consult with relevant resources as required. Coordinate review and approval of design and interfaces on client requirements and specifications. Prepare Process scope of work (SoW) and seek agreement from supervising Senior/ Lead Process Engineer (or designated representative. Estimate Process manhours for any job using the current TW Process manhour norms. Ensure all work is checked and approved before issue.<br><br>Quality Assurance<br><br>Work within the provisions and guidelines of the Quality Assurance systems<br><br>Safety<br><br>Responsible for personal safety and working within the Occupational Health & Safety procedures. Competent in implementing HSE in the design process, focuses on process safety and strives to use best practice.<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage <br><br>Industry Specific Experience<br><br>Must have process engineering experience in oil and gas for offshore and onshore projects Engineering experience in the same or similar industry, including experience in multi-disciplinary projects and teams. Good knowledge of discipline design/engineering with sufficient experience in different discipline areas. Must have simulation & hydraulic experience<br><br>Moving forward together<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br><br>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Job Summary We are seeking an experienced IT Systems Engineer to administer, maintain, secure, and optimize enterprise IT infrastructure, ensuring high availability, business continuity, and operational excellence. The ideal candidate will have strong expertise in system administration, backup and disaster recovery, enterprise storage, virtualization, ITSM platforms, infrastructure monitoring, and database administration. The role requires hands-on experience with IBM Spectrum Protect, Commvault, BMC Helix, enterprise storage solutions, UNIX/Linux operating systems, virtualization technologies, and enterprise databases while supporting IT operations in an ITIL-based environment. Key Responsibilities System Administration & Infrastructure Management Administer and maintain enterprise IT infrastructure, including physical and virtual servers. Manage Windows and UNIX/Linux server environments. Perform system installation, configuration, upgrades, and patch management. Monitor infrastructure health, performance, and availability. Implement infrastructure hardening and security best practices. Support enterprise storage and virtualization platforms. Backup & Disaster Recovery Administer enterprise backup solutions. Design, implement, and maintain backup and disaster recovery strategies. Configure and manage:IBM Spectrum Protect Commvault Perform backup scheduling and monitoring. Execute backup restoration and disaster recovery testing. Ensure backup compliance with organizational and cybersecurity policies. Maintain Recovery Point Objectives (RPO) and Recovery Time Objectives (RTO). Storage Administration Administer enterprise storage infrastructure. Manage IBM and EMC storage solutions. Monitor storage utilization and capacity planning. Perform storage provisioning and optimization. Support SAN/NAS environments. Ensure storage availability and redundancy. Infrastructure Monitoring & Incident Management Monitor enterprise infrastructure using monitoring tools. Detect and resolve infrastructure alerts. Investigate incidents and perform Root Cause Analysis (RCA). Coordinate with infrastructure, database, network, and application teams. Resolve incidents within SLA targets. Support Problem Management and Change Management processes. ITSM Platform Administration Administer and maintain BMC Helix ITSM. Configure:Workflows Service Catalogs Forms Automation Rules User Access Support ITSM integrations. Maintain ITIL-compliant IT service processes. Troubleshoot ITSM platform issues. Database Administration Support Support enterprise databases including:Microsoft SQL Server MySQLOracle Database Postgre SQLSAP HANAResponsibilities include:Database health monitoring Backup coordination Performance monitoring Storage management Capacity planning UNIX / Linux Administration Administer enterprise operating systems including:IBM AIXRed Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Responsibilities include:Installation Patch management User administration Performance tuning Security hardening Capacity Planning & Performance Optimization Analyze infrastructure performance. Forecast storage and infrastructure capacity requirements. Optimize server and storage utilization. Recommend infrastructure improvements. Track software licenses and subscription utilization. Documentation Prepare and maintain:System Architecture Documents Configuration Documents Backup Procedures Disaster Recovery Plans Installation Guides Standard Operating Procedures (SOPs) Operational Manuals Incident Reports Capacity Reports Support & Collaboration Provide Level 2 and Level 3 infrastructure support. Support production systems. Collaborate with infrastructure, application, database, and security teams. Participate in infrastructure projects and technology upgrades. Support business continuity initiatives. Continuous Improvement Evaluate emerging technologies. Recommend infrastructure enhancements. Improve automation and operational efficiency. Ensure compliance with ITIL and cybersecurity best practices. Education Bachelor's Degree in:Computer Science Information Technology Computer Engineering Information Systems Electronics & Communication Engineering Related Engineering Discipline Required Experience Minimum 8+ years of experience as an IT Systems Engineer or Systems Administrator. Experience supporting enterprise IT infrastructure. Hands-on experience with enterprise backup solutions. Experience administering enterprise storage environments. Experience with ITSM platforms. Experience supporting production-critical environments.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules. Manage process design and any design changes within budget and schedule. Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Reviews documentation to assist others and reviews/authorizes work done by direct reports. Evaluate new technology advancements against existing design standards and revise where applicable. Identify and review new technology development which could be applicable in providing more cost-effective facilities. Perform discipline specific engineering services such as:Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. <br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe working practices. Understand and follow OH&S procedures. Promoting health, safety and environmental awareness.<br><br>Industry Specific Experience<br><br>Must have process design in onshore/offshore oil & gas industry in a brownfield environment with focus on rotating equipments. FEED and detailed engineering experience essential. Decent experience in an engineering consultancy in a multidiscipline environment is essential. <br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage <br><br>IT Skills<br><br>Simulations <br><br>Aspen suite, Hysys, Pipesys, Flare Net PRO-II <br><br>Flow Assurance <br><br>Pipe Net Pipesim PVTSim/OLGA Pipe Phase TLNET Fathom<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules. Manage process design and any design changes within budget and schedule. Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Reviews documentation to assist others and reviews/authorizes work done by direct reports. Evaluate new technology advancements against existing design standards and revise where applicable. Identify and review new technology development which could be applicable in providing more cost-effective facilities. Perform discipline specific engineering services such as:Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. <br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe working practices. Understand and follow OH&S procedures. Promoting health, safety and environmental awareness.<br><br>Industry Specific Experience<br><br>Must have process design in onshore/offshore oil & gas industry in a brownfield environment with focus on rotating equipments. FEED and detailed engineering experience essential. Decent experience in an engineering consultancy in a multidiscipline environment is essential. <br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage <br><br>IT Skills<br><br>Simulations <br><br>Aspen suite, Hysys, Pipesys, Flare Net PRO-II <br><br>Flow Assurance <br><br>Pipe Net Pipesim PVTSim/OLGA Pipe Phase TLNET Fathom<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Black & Grey HR is recruiting for a leading technology solutions provider in Doha, Qatar. Our client is looking to hire an Audio Visual (AV) Commissioning Engineer who will be responsible for commissioning, testing, calibrating, and integrating AV systems to ensure optimal performance and successful project delivery. Black & Grey HR is recruiting for a leading technology solutions provider in Doha, Qatar. Our client is looking to hire an Audio Visual (AV) Commissioning Engineer who will be responsible for commissioning, testing, calibrating, and integrating AV systems to ensure optimal performance and successful project delivery.<br><br>Key Responsibilities<br><br>AV Systems Commissioning & Integration<br><br> Commission, configure, and optimize integrated audio, video, lighting, and control systems to ensure seamless functionality and high-performance operation. Perform comprehensive system testing, diagnostics, troubleshooting, and fault resolution during project commissioning. Calibrate audio and video equipment, including speakers, microphones, DSPs, displays, projectors, cameras, and conferencing devices for optimal performance. Integrate AV control systems and fine-tune user interfaces such as touch panels and control software to deliver an intuitive user experience. Verify system functionality against project specifications, technical drawings, and client requirements before handover. Ensure compliance with AV industry standards and protocols including HDMI, HDBase T, Dante, AES67, and other relevant technologies. <br><br>Project Delivery & Documentation<br><br> Collaborate closely with AV designers, programmers, project managers, and installation teams to ensure timely and successful project delivery. Prepare and maintain accurate commissioning documentation, including system configurations, testing reports, calibration records, and as-built modifications. Support final system acceptance testing and client sign-off processes. Provide technical guidance during installation and assist in resolving integration challenges encountered on-site. <br><br>Client Support & Training<br><br> Deliver end-user training on AV system operation, functionality, and basic maintenance. Provide technical support during project handover and warranty periods when required. Communicate technical information effectively with clients, consultants, and internal stakeholders throughout project execution. <br><br>Requirements<br><br> Bachelor's degree in Electrical Engineering, Audio Visual Technology, Computer Science, or a related engineering discipline. 5–8 years of experience in AV commissioning, system integration, or a similar technical role. Strong technical knowledge of professional AV systems, including audio, video, control systems, networking, and signal distribution technologies. Hands-on experience with amplifiers, DSP processors, displays, projectors, signal routing equipment, microphones, cameras, and conferencing solutions. Proficiency in using AV calibration, testing, and measurement tools. <br><br>- Experience working with platforms such as Crestron, Extron, QSC, Microsoft Teams, and Zoom is an advantage.-<br><br>Good understanding of AV industry standards and protocols, including HDMI, HDBase T, Dante, and AES67.<br><br> Strong troubleshooting, analytical, and problem-solving skills with excellent attention to detail. Ability to work independently and collaboratively within multidisciplinary project teams. Excellent communication and technical documentation skills. CTS (Certified Technology Specialist) or other relevant AV certifications will be considered an advantage. <br><br>Benefits<br><br> Competitive Salary + Benefits Package<br><br>Skills: Experience<br><br> Minimum 5 years of work experience in the IT industry. 3 years of experience in positions and responsibilities within IT Service Management or End User Computing / Equipment Domain. Proven experience handling VIP/end-user executive support. Strong knowledge of Windows OS environments. Familiarity with Microsoft 365, Outlook, Teams, and basic network troubleshooting. Experience with ticketing tools and Managed Print Services Understanding of security tools such as antivirus, endpoint protection, and MFA.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules. Manage process design and any design changes within budget and schedule. Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Reviews documentation to assist others and reviews/authorizes work done by direct reports. Evaluate new technology advancements against existing design standards and revise where applicable. Identify and review new technology development which could be applicable in providing more cost-effective facilities. Perform discipline specific engineering services such as:Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. <br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe working practices. Understand and follow OH&S procedures. Promoting health, safety and environmental awareness.<br><br>Industry Specific Experience<br><br>Must have process design in onshore/offshore oil & gas industry in a brownfield environment with focus on rotating equipments. FEED and detailed engineering experience essential. Decent experience in an engineering consultancy in a multidiscipline environment is essential. <br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage <br><br>IT Skills<br><br>Simulations <br><br>Aspen suite, Hysys, Pipesys, Flare Net PRO-II <br><br>Flow Assurance <br><br>Pipe Net Pipesim PVTSim/OLGA Pipe Phase TLNET Fathom<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

About the Role We are looking for a strong Site Reliability Engineer to own and continuously improve the reliability, scalability, security, and operational excellence of our production systems. You will be responsible for the infrastructure and reliability layer behind our commerce platform, including AWS, Kubernetes, networking, databases, search infrastructure, observability, CI/CD, incident response, and production operations. This is a hands-on role with high ownership, ideal for someone who can operate independently, solve complex infrastructure problems, and help build a stable foundation for a fast-growing product. Our stack includes AWS, EKS/Kubernetes, Postgre SQL, Redis/Valkey, Elasticsearch/Open Search, Rabbit MQ, API Gateway, WAF, Load Balancers, Docker, Go/. NET Core microservices, Terraform web applications, and multiple third-party integrations.<br>Responsibilities Own the reliability, availability, performance, and security of our production infrastructure. Manage and improve our AWS cloud environment, including EKS, networking, load balancers, API Gateway, WAF, RDS/Postgre SQL, caching, and managed services. Operate and optimize Kubernetes workloads, deployments, scaling, resource usage, pod health, service discovery, ingress, and environment configuration. Maintain and improve database reliability, including Postgre SQL performance, backups, monitoring, replication awareness, connection management, and incident handling. Support and optimize Elasticsearch/Open Search usage for catalog/search workloads. Build and improve observability across the platform, including logs, metrics, dashboards, alerts, tracing, and actionable production monitoring. Improve incident response processes: detection, triage, mitigation, postmortems, and prevention of repeated issues. Strengthen CI/CD pipelines and release processes to make deployments safer, faster, and more reliable. Work closely with backend, mobile, product, and operations teams to support new features and ensure production readiness. Review architecture and infrastructure decisions with reliability, cost, security, and scalability in mind. Help secure the platform through AWS security best practices, WAF rules, IAM hygiene, network controls, secrets management, and vulnerability awareness. Monitor and optimize cloud costs without compromising reliability. Document operational procedures, runbooks, infrastructure decisions, and recovery processes.<br>Requirements Strong hands-on experience with AWS production environments. Solid experience with Kubernetes, Docker, deployments, services, ingress, scaling, and troubleshooting. Strong understanding of networking fundamentals: DNS, TLS, load balancing, routing, security groups, firewalls, private/public networking, and HTTP traffic flow. Experience operating Postgre SQL in production, including performance troubleshooting, backups, monitoring, and connection-related issues. Experience with Elasticsearch or Open Search in production environments. Good understanding of observability: metrics, logs, alerts, dashboards, tracing, SLIs/SLOs, and incident detection. Experience with CI/CD pipelines and modern deployment workflows. Ability to troubleshoot complex production issues across application, infrastructure, database, and network layers. Strong sense of ownership, clear communication, and the ability to operate calmly during incidents. Comfortable working in a fast-paced startup environment where priorities can move quickly.<br>What Success Looks Like Within the first months, you will help us make the platform more stable, observable, secure, and predictable. You will improve our production visibility, reduce recurring incidents, strengthen infrastructure ownership, and create clear operational standards for deployments, alerts, incident handling, and recovery. We are looking for someone who does not just “manage servers,” but actively improves the engineering foundation of the company.Location Doha-based is preferred, but remote candidates can be considered if they are strong, reliable, and able to work with high ownership and clear communication.

About the Role We are looking for a strong Site Reliability Engineer to own and continuously improve the reliability, scalability, security, and operational excellence of our production systems. You will be responsible for the infrastructure and reliability layer behind our commerce platform, including AWS, Kubernetes, networking, databases, search infrastructure, observability, CI/CD, incident response, and production operations. This is a hands-on role with high ownership, ideal for someone who can operate independently, solve complex infrastructure problems, and help build a stable foundation for a fast-growing product. Our stack includes AWS, EKS/Kubernetes, Postgre SQL, Redis/Valkey, Elasticsearch/Open Search, Rabbit MQ, API Gateway, WAF, Load Balancers, Docker, Go/. NET Core microservices, Terraform web applications, and multiple third-party integrations.<br>Responsibilities Own the reliability, availability, performance, and security of our production infrastructure. Manage and improve our AWS cloud environment, including EKS, networking, load balancers, API Gateway, WAF, RDS/Postgre SQL, caching, and managed services. Operate and optimize Kubernetes workloads, deployments, scaling, resource usage, pod health, service discovery, ingress, and environment configuration. Maintain and improve database reliability, including Postgre SQL performance, backups, monitoring, replication awareness, connection management, and incident handling. Support and optimize Elasticsearch/Open Search usage for catalog/search workloads. Build and improve observability across the platform, including logs, metrics, dashboards, alerts, tracing, and actionable production monitoring. Improve incident response processes: detection, triage, mitigation, postmortems, and prevention of repeated issues. Strengthen CI/CD pipelines and release processes to make deployments safer, faster, and more reliable. Work closely with backend, mobile, product, and operations teams to support new features and ensure production readiness. Review architecture and infrastructure decisions with reliability, cost, security, and scalability in mind. Help secure the platform through AWS security best practices, WAF rules, IAM hygiene, network controls, secrets management, and vulnerability awareness. Monitor and optimize cloud costs without compromising reliability. Document operational procedures, runbooks, infrastructure decisions, and recovery processes.<br>Requirements Strong hands-on experience with AWS production environments. Solid experience with Kubernetes, Docker, deployments, services, ingress, scaling, and troubleshooting. Strong understanding of networking fundamentals: DNS, TLS, load balancing, routing, security groups, firewalls, private/public networking, and HTTP traffic flow. Experience operating Postgre SQL in production, including performance troubleshooting, backups, monitoring, and connection-related issues. Experience with Elasticsearch or Open Search in production environments. Good understanding of observability: metrics, logs, alerts, dashboards, tracing, SLIs/SLOs, and incident detection. Experience with CI/CD pipelines and modern deployment workflows. Ability to troubleshoot complex production issues across application, infrastructure, database, and network layers. Strong sense of ownership, clear communication, and the ability to operate calmly during incidents. Comfortable working in a fast-paced startup environment where priorities can move quickly.<br>What Success Looks Like Within the first months, you will help us make the platform more stable, observable, secure, and predictable. You will improve our production visibility, reduce recurring incidents, strengthen infrastructure ownership, and create clear operational standards for deployments, alerts, incident handling, and recovery. We are looking for someone who does not just “manage servers,” but actively improves the engineering foundation of the company.Location Doha-based is preferred, but remote candidates can be considered if they are strong, reliable, and able to work with high ownership and clear communication.

Job Title – VSAT L2 Engineer / Satellite Communication Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description:<br>Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Perform deep analysis of: VSAT link failures and instability Low SNR / high BER issues Hub-to-remote communication failures Network congestion impacting satellite links Identify root causes: Alignment issues RF interference Hardware faults (modem, antenna, RF chain) Weather-related impairments<br>2. Incident Resolution & Service Restoration Own and resolve P1/P2 incidents escalated from L1Drive service restoration within MTTR targets Coordinate with: Field engineers for antenna alignment Hub/NOC teams for configuration changes Vendors/OEMs<br>3. RF & Satellite Analysis Analyze: Link budget parameters Carrier performance Uplink/downlink issues Troubleshoot: Rain fade / atmospheric interference Power level imbalance Frequency/interference issues<br>4. Root Cause Analysis (RCA) Perform RCA for: Chronic link failures Repeated VSAT downtime Provide: Corrective actions Preventive measures (CAPA)<br>5. Change & Maintenance Support Support: VSAT installations and migrations Hub upgrades and configurations Frequency/power adjustments Perform: Pre-checks and post-validation Risk and impact analysis<br>6. Vendor & Field Coordination Coordinate with: OEMs (Hughes, Gilat, i Direct, etc.) Field service teams Satellite service providers Manage TAC/vendor escalations<br>7. Performance Optimization Monitor and improve: Link stability Throughput Uptime Identify and fix: Congestion issues RF inefficiencies<br>8. L1 Support & Governance Provide technical guidance to L1 team Validate escalations and improve troubleshooting quality Enhance SOPs and knowledge base<br>9. Reporting & Governance Prepare: RCA reports Performance reports Incident analysis Participate in: Problem management reviews Service improvement initiatives<br>Required Technical Skills Strong knowledge of: VSAT systems (Hub, Remote, Satellite link) RF concepts (SNR, BER, Eb/N0, power levels) Satellite communication principles Understanding of: IP networking and routing basics Hands-on experience with: VSAT platforms (Hughes, i Direct, Gilat) Monitoring tools and diagnostics.<br>Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

Job Summary<br><br>The Lead Electrical Engineer is responsible for leading and managing all electrical engineering and design activities related to Oil & Gas projects. The role requires extensive experience in engineering design, fleet studies, design development, site management, and project execution. The incumbent will provide technical leadership throughout the project lifecycle, ensuring compliance with industry standards, project specifications, safety requirements, and client expectations<br>.<br>Key Responsibilities Lead and supervise electrical engineering design activities for Oil & Gas projects from concept through detailed engineering and execution. Manage the preparation, review, and approval of electrical engineering deliverables including single-line diagrams, load lists, specifications, calculations, layouts, cable schedules, and equipment datasheets. Conduct and oversee fleet studies, electrical system studies, and engineering evaluations to support operational and project requirements. Coordinate multidisciplinary engineering activities and ensure effective integration with mechanical, instrumentation, civil, and process engineering teams. Provide technical guidance and mentoring to engineers and designers within the project team. Review contractor and vendor submissions to ensure compliance with project specifications, international standards, and industry best practices. Support project planning, budgeting, scheduling, and resource allocation activities. Lead site engineering activities, resolve technical issues, and provide engineering support during construction, commissioning, start-up, and handover phases. Ensure adherence to HSE requirements, project quality standards, and regulatory compliance throughout project execution. Participate in technical reviews, design reviews, HAZOPs, risk assessments, and project meetings with stakeholders and clients. Monitor project progress and provide technical reports, recommendations, and updates to managemen<br>t.<br>Qualifications & Experience Bachelor's Degree in Electrical Engineering from a recognised university. Professional Engineering certification or membership in a recognised engineering institution is preferred. Minimum 10 years of professional experience in Engineering and Design. Demonstrated expertise in engineering design, fleet studies, design development, and related engineering activities. Proven experience in site management and project management, including planning, execution, monitoring, and project delivery. Mandatory experience within the Oil & Gas industry. Strong knowledge of international codes and standards such as IEC, IEEE, API, NFPA, and relevant industry regulations. Experience working on brownfield and greenfield Oil & Gas projects is highly desirab<br>le.<br>Required Competencies Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective stakeholder and client management skills. Strong communication and report-writing capabilities. Ability to manage multiple projects and priorities in a fast-paced environment. Strong commitment to safety, quality, and operational excelle<br>nce.<br>Mandatory Requirements Minimum 10 years of Engineering and Design experience. Extensive experience in engineering design, fleet studies, and design development. Proven site management and project management experience. Oil & Gas industry experience is mandatory. Bachelor's Degree in Electrical Enginee<br>ring.

Job Title – VSAT L2 Engineer / Satellite Communication Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description:<br>Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Perform deep analysis of: VSAT link failures and instability Low SNR / high BER issues Hub-to-remote communication failures Network congestion impacting satellite links Identify root causes: Alignment issues RF interference Hardware faults (modem, antenna, RF chain) Weather-related impairments<br>2. Incident Resolution & Service Restoration Own and resolve P1/P2 incidents escalated from L1Drive service restoration within MTTR targets Coordinate with: Field engineers for antenna alignment Hub/NOC teams for configuration changes Vendors/OEMs<br>3. RF & Satellite Analysis Analyze: Link budget parameters Carrier performance Uplink/downlink issues Troubleshoot: Rain fade / atmospheric interference Power level imbalance Frequency/interference issues<br>4. Root Cause Analysis (RCA) Perform RCA for: Chronic link failures Repeated VSAT downtime Provide: Corrective actions Preventive measures (CAPA)<br>5. Change & Maintenance Support Support: VSAT installations and migrations Hub upgrades and configurations Frequency/power adjustments Perform: Pre-checks and post-validation Risk and impact analysis<br>6. Vendor & Field Coordination Coordinate with: OEMs (Hughes, Gilat, i Direct, etc.) Field service teams Satellite service providers Manage TAC/vendor escalations<br>7. Performance Optimization Monitor and improve: Link stability Throughput Uptime Identify and fix: Congestion issues RF inefficiencies<br>8. L1 Support & Governance Provide technical guidance to L1 team Validate escalations and improve troubleshooting quality Enhance SOPs and knowledge base<br>9. Reporting & Governance Prepare: RCA reports Performance reports Incident analysis Participate in: Problem management reviews Service improvement initiatives<br>Required Technical Skills Strong knowledge of: VSAT systems (Hub, Remote, Satellite link) RF concepts (SNR, BER, Eb/N0, power levels) Satellite communication principles Understanding of: IP networking and routing basics Hands-on experience with: VSAT platforms (Hughes, i Direct, Gilat) Monitoring tools and diagnostics.<br>Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

Experienced Landscape & Irrigation Engineer responsible for the planning, design, execution, and maintenance of landscape and irrigation projects from concept through completion. Skilled in developing landscape designs, preparing detailed drawings, technical specifications, irrigation system schematics, quantity take-offs, and Bills of Quantities (BOQs). Capable of conducting design evaluations and value engineering exercises to optimize project performance, sustainability, and cost-effectiveness. Acts as the primary point of contact with clients, consultants, and stakeholders, leading technical meetings, understanding project requirements, and ensuring successful project delivery. Manages multidisciplinary teams of engineers, supervisors, and site personnel during both construction and maintenance phases, ensuring compliance with project specifications, quality standards, schedules, and budgets.<br>Key responsibilities include:Designing landscape and irrigation systems for commercial, residential, hospitality, and public-sector developments. Preparing concept, detailed, and as-built drawings using industry-standard software. Developing irrigation schematics, hydraulic calculations, and water management strategies. Preparing BOQs, cost estimates, material specifications, and tender documentation. Reviewing and evaluating designs, shop drawings, and contractor submissions. Coordinating with clients, consultants, authorities, and suppliers throughout project lifecycles. Leading site teams during construction and maintenance activities, ensuring quality workmanship and adherence to safety standards. Monitoring project progress, resolving technical issues, and implementing corrective actions when required. Driving sustainable landscaping practices, efficient irrigation solutions, and continuous improvement initiatives. Combines strong technical expertise, project management capabilities, and leadership skills to deliver high-quality, sustainable landscapes that meet client expectations and enhance the built environment. SKILLSStrong knowledge of landscape design principles, plant selection, and horticultural practices. Expertise in irrigation system design, hydraulic calculations, and water-efficient irrigation solutions. Proficiency in Auto CAD, Civil 3D, GIS, and landscape design software. Ability to prepare and review technical drawings, irrigation schematics, BOQs, specifications, and tender documents. Solid understanding of construction methodologies, landscape maintenance practices, and project lifecycle management. Experience in project planning, scheduling, budgeting, and cost control. Strong leadership and team management skills with the ability to supervise multidisciplinary teams. Excellent client-facing and stakeholder management abilities. Knowledge of local authority requirements, industry standards, and environmental regulations. Strong analytical and problem-solving skills with attention to detail. Ability to manage multiple projects simultaneously and work under tight deadlines. Effective communication, negotiation, and presentation skills. Commitment to quality, sustainability, health & safety, and continuous improvement. Ability to perform site inspections, technical evaluations, and quality assurance reviews. Experience in value engineering and optimizing landscape and irrigation designs for performance and cost efficiency. Valid driving license and willingness to travel between project sites when required.<br>LOCATION: Doha | Qatar - priority for local hiring

Project: Major Offshore Redevelopment Project<br><br>Location: Middle East / Offshore Qatar<br><br>Position Summary<br><br>The Senior Project Engineer is responsible for the planning, preparation, coordination, and execution of offshore installation engineering activities for the Bul Hanine Redevelopment Project and other Middle East offshore projects. The role provides technical leadership and operational oversight to ensure offshore construction and installation activities are executed safely, efficiently, and in accordance with project requirements, company standards, and client expectations.<br><br>Key Responsibilities<br><br>Offshore Installation Engineering & Project Execution<br><br>Lead the preparation, planning, and management of offshore installation activities throughout all project phases. Develop and implement offshore installation methodologies, procedures, work packs, and execution plans. Manage the overall offshore installation engineering scope for Middle East projects, ensuring compliance with project schedules, quality requirements, and HSE standards. Support project execution by providing technical guidance and solutions to offshore installation challenges.<br><br>Project Coordination & Stakeholder Management<br><br>Liaise with clients, subcontractors, marine contractors, and other relevant stakeholders during offshore construction and installation activities. Coordinate and supervise offshore construction activities to ensure safe and efficient project execution. Facilitate communication between engineering, construction, marine operations, procurement, and project management teams.<br><br>Offshore Operations Management<br><br>Monitor offshore construction progress and performance, ensuring activities are completed according to approved plans and schedules. Coordinate the allocation and utilization of offshore resources, including vessels, equipment, materials, and personnel. Support marine spread planning, vessel mobilization and demobilization, and offshore logistics management. Ensure effective resource planning and coordination to achieve project objectives and minimize operational risks.<br><br>Process Improvement & Knowledge Management<br><br>Continuously enhance organizational process assets relating to offshore engineering and construction management. Capture, document, and disseminate lessons learned and best practices from offshore installation projects. Contribute to the improvement of engineering procedures, work processes, and operational standards.<br><br>Project Support<br><br>Prepare technical reports, progress updates, installation execution documents, and project deliverables as required. Perform duties and special assignments delegated by the Project Manager. Support initiatives and activities assigned by the Offshore Operations Center.<br><br>Qualifications & Professional Requirements<br><br>Education<br><br>Bachelor's Degree in Offshore Engineering, Marine Engineering, Naval Architecture, Mechanical Engineering, Civil Engineering, or a related engineering discipline.<br><br>Experience<br><br>Minimum of 10 years of experience in the offshore engineering and construction industry. Proven experience in offshore installation engineering and project execution for major offshore oil and gas developments. Strong expertise in:Offshore construction and installation operations Vessel survey and inspection Marine and maritime management Offshore operations management procedures Offshore project planning and execution Technical Competencies<br><br>Strong understanding of offshore installation methods, heavy lifting operations, marine spread management, and subsea/offshore construction activities. Ability to act as a lead specialist and provide technical leadership on offshore engineering matters. Proficient in project planning, risk assessment, resource management, and construction coordination. Familiarity with international offshore engineering and marine industry standards.<br><br>Language Requirements<br><br>Fluent in English, with strong verbal and written communication skills in an offshore engineering environment. Mandarin Chinese language skills are preferred and considered an advantage.<br><br>Professional Qualifications<br><br>Professional qualification or recognized designation as a Senior Engineer. Relevant certifications related to offshore engineering, marine operations, or project management are advantageous.<br><br>Key Attributes<br><br>Strong leadership and team coordination skills. Excellent problem-solving and decision-making capabilities. Ability to work in a multidisciplinary and multicultural project environment. Strong organizational, planning, and stakeholder management skills. Commitment to safety, quality, and operational excellence.<br><br>Reporting To: Project Manager / Offshore Operations Center<br><br>Employment Type: Full-Time<br><br>Industry: Offshore Oil & Gas Engineering and Construction

Job Summary Serve as the mechanical engineer for overseas projects;Job responsibilities include but are not limited to: mechanical design, equipment selection, technical management, document design, review and verification, technical support for procurement (such as bidding document preparation, bid evaluation, clarification, drawing review, Factory Acceptance Test/FAT, etc.). Be responsible for coordinating with overseas clients, and solving project-related issues and problems raised by clients. Be responsible for completing other relevant work assigned by the client. Principal Responsibilities Communicate and coordinate with foreign clients on process design schemes, etc., and solve the problems of process discipline;Coordinate with client to solve relevant problems and close-out comments;Responsible for technical tender document review, technical clarification, bid evaluation document review and other work;Provide technical training and guidance on a regular basis, with no less than 10 times or 40 hours of training per year;Be responsible for completing other related work assigned by client. Education/Experience Requirements/ Certification Bachelor degree or above;More than 15 years of experience in offshore engineering (offshore platform, FPSO and semi-submersible platform, etc.) mechanical design；Familiar with professional knowledge of offshore engineering machinery, international standards (including but not limited to API, ASME, SHELL DEP, and Qatar Energy standards), as well as industry regulations and policies;Domestic candidates shall have English communication skills that meet work requirements (priority will be given to those with CET-6 score of 550 or above / TOEIC score of 700 or above); for foreign candidates, proficiency in both English and Chinese is preferred;Candidates with ASME VIII certification are preferred. Behavioral/Technical Skills: Proficient in using relevant office software such as Excel, Word, and PPT (Static Equipment Engineers shall be proficient in using PVELT and TANK software);Serious and rigorous in work, strong sense of responsibility, hard-working, and able to work overtime at any time according to work needs;Work seriously, rigorous, strong sense of responsibility, hard-working;Possess good learning ability and be able to take the initiative to learn new skills and knowledge;

Position Purpose Summary Principal Information Security Assurance Engineer/ Specialist lead and enforce enterprise-wide security assurance initiatives by evaluating and strengthening security mechanisms across systems, applications, and databases. Conduct comprehensive audits to detect and prevent unauthorized or malicious activities by users and administrators. Drive the adoption and continuous improvement of a secure SDLC framework across the be IN. Oversee and execute regular penetration testing and vulnerability assessments to safeguard the integrity, confidentiality, and availability of information assets. Provide strategic, administrative, and technical leadership to support the Director of Information Security in developing and implementing robust cybersecurity strategies.<br>Key Responsibilities and Accountabilities Review audit log of user applications, profile administration activities and privileged users, review objects/services access and usage. Audit operational change due to the change request. Audit privileged level access and changes to services, applications, databases. Ensure security mechanisms are considered within the SDLC. Conduct periodically internal penetration testing in assigned areas and contribute to the assessment of the security posture across all of infrastructure and oversee scheduled and event/service driven external penetration testing. Conduct vulnerability scanning and be able to interpret the results. Tracks and coordinate the security patching activities with relevant teams and provide the required support. Assess change request for the risk it poses to application and databases security and review the subsequent impact on operations. Approve the request after checking for approval from necessary authorities. Examine mechanisms and technologies in achieving and optimizing security controls and processes. To provide support and analysis during and after a security incidents, as necessary. Analyzes general information assurance-related technical problems and provide support in solving these problems. Research security enhancements and make recommendations to management. Coordinate the activities related to Information Security Projects.<br>Education Minimum Bachelor Degree in IT, Computer Science, Cyber Security, Business Administration or related field.<br>Experience Minimum 6 years of experience in IT domain, penetration testing, professional experience in corporate Applications Security, Analysis and Solutions Delivery or in any similar role.<br>Please refer to our privacy policy to know more about how we process your personal data

Are you a skilled Service Engineer with experience in low-voltage (LV) switchgear systems? Do you enjoy solving technical challenges, working directly with customers, and delivering high-quality after-sales support?<br>Join Jaidah Group and become part of a dynamic team committed to providing exceptional technical service and innovative engineering solutions.<br>Key Responsibilities Install, commission, test, and troubleshoot low-voltage switchgear systems at customer sites. Perform preventive, predictive, and corrective maintenance to ensure equipment reliability and maximum uptime. Diagnose electrical and mechanical faults and implement effective corrective actions. Respond promptly to customer service requests, breakdowns, and emergency callouts. Prepare technical service reports, inspection records, and maintenance recommendations. Ensure all service activities comply with company procedures, safety standards, and industry regulations. Coordinate with customers, sales teams, and technical support departments to resolve technical issues. Conduct equipment condition assessments and recommend repairs, upgrades, retrofits, and spare parts. Deliver operational guidance and maintenance training to customer maintenance teams. Prepare Operation & Maintenance (O&M) manuals, training materials, and project handover documentation. Support factory inspections and audits by providing the required technical documentation.<br>Qualifications & Skills Bachelor's Degree or Diploma in Electrical Engineering or a related discipline. Experience in installation, commissioning, and maintenance of LV Switchgear systems. Strong troubleshooting and fault-finding skills in electrical and mechanical systems. Good knowledge of electrical drawings, technical documentation, and maintenance procedures. Excellent communication and customer service skills. Ability to work independently and manage multiple service assignments. Willingness to travel to customer sites and respond to emergency service requirements.<br>Why Join Jaidah Group? Work with one of Qatar's leading and most respected business groups. Be part of a professional engineering team delivering innovative solutions. Gain exposure to challenging projects and advanced electrical technologies. Enjoy opportunities for continuous learning and career development. Contribute to a company that values safety, quality, teamwork, and customer satisfaction.<br>Ready to take the next step in your engineering career? Apply today and become part of our growing team!

Position Purpose Summary Principle Information Security Assurance Engineer/ Specialist lead and enforce enterprise-wide security assurance initiatives by evaluating and strengthening security mechanisms across systems, applications, and databases. Conduct comprehensive audits to detect and prevent unauthorized or malicious activities by users and administrators. Drive the adoption and continuous improvement of a secure SDLC framework across the be IN. Oversee and execute regular penetration testing and vulnerability assessments to safeguard the integrity, confidentiality, and availability of information assets. Provide strategic, administrative, and technical leadership to support the Director of Information Security in developing and implementing robust cybersecurity strategies.<br>Key Responsibilities and Accountabilities Review audit log of user applications, profile administration activities and privileged users, review objects/services access and usage. Audit operational change due to the change request. Audit privileged level access and changes to services, applications, databases. Ensure security mechanisms are considered within the SDLC. Conduct periodically internal penetration testing in assigned areas and contribute to the assessment of the security posture across all of infrastructure and oversee scheduled and event/service driven external penetration testing. Conduct vulnerability scanning and be able to interpret the results. Tracks and coordinate the security patching activities with relevant teams and provide the required support. Assess change request for the risk it poses to application and databases security and review the subsequent impact on operations. Approve the request after checking for approval from necessary authorities. Examine mechanisms and technologies in achieving and optimizing security controls and processes. To provide support and analysis during and after a security incidents, as necessary. Analyzes general information assurance-related technical problems and provide support in solving these problems. Research security enhancements and make recommendations to management. Coordinate the activities related to Information Security Projects.<br>Education Minimum Bachelor Degree in IT, Computer Science, Cyber Security, Business Administration or related field.<br>Experience Minimum 6 years of experience in IT domain, penetration testing, professional experience in corporate Applications Security, Analysis and Solutions Delivery or in any similar role.<br><br>Please refer to our privacy policy to know more about how we process your personal data

Position Purpose Summary Principle Information Security Assurance Engineer/ Specialist lead and enforce enterprise-wide security assurance initiatives by evaluating and strengthening security mechanisms across systems, applications, and databases. Conduct comprehensive audits to detect and prevent unauthorized or malicious activities by users and administrators. Drive the adoption and continuous improvement of a secure SDLC framework across the be IN. Oversee and execute regular penetration testing and vulnerability assessments to safeguard the integrity, confidentiality, and availability of information assets. Provide strategic, administrative, and technical leadership to support the Director of Information Security in developing and implementing robust cybersecurity strategies.<br>Key Responsibilities and Accountabilities Review audit log of user applications, profile administration activities and privileged users, review objects/services access and usage. Audit operational change due to the change request. Audit privileged level access and changes to services, applications, databases. Ensure security mechanisms are considered within the SDLC. Conduct periodically internal penetration testing in assigned areas and contribute to the assessment of the security posture across all of infrastructure and oversee scheduled and event/service driven external penetration testing. Conduct vulnerability scanning and be able to interpret the results. Tracks and coordinate the security patching activities with relevant teams and provide the required support. Assess change request for the risk it poses to application and databases security and review the subsequent impact on operations. Approve the request after checking for approval from necessary authorities. Examine mechanisms and technologies in achieving and optimizing security controls and processes. To provide support and analysis during and after a security incidents, as necessary. Analyzes general information assurance-related technical problems and provide support in solving these problems. Research security enhancements and make recommendations to management. Coordinate the activities related to Information Security Projects.<br>Education Minimum Bachelor Degree in IT, Computer Science, Cyber Security, Business Administration or related field.<br>Experience Minimum 6 years of experience in IT domain, penetration testing, professional experience in corporate Applications Security, Analysis and Solutions Delivery or in any similar role.<br><br>Please refer to our privacy policy to know more about how we process your personal data

Position Purpose Summary Principle Information Security Assurance Engineer/ Specialist lead and enforce enterprise-wide security assurance initiatives by evaluating and strengthening security mechanisms across systems, applications, and databases. Conduct comprehensive audits to detect and prevent unauthorized or malicious activities by users and administrators. Drive the adoption and continuous improvement of a secure SDLC framework across the be IN. Oversee and execute regular penetration testing and vulnerability assessments to safeguard the integrity, confidentiality, and availability of information assets. Provide strategic, administrative, and technical leadership to support the Director of Information Security in developing and implementing robust cybersecurity strategies.<br>Key Responsibilities and Accountabilities Review audit log of user applications, profile administration activities and privileged users, review objects/services access and usage. Audit operational change due to the change request. Audit privileged level access and changes to services, applications, databases. Ensure security mechanisms are considered within the SDLC. Conduct periodically internal penetration testing in assigned areas and contribute to the assessment of the security posture across all of infrastructure and oversee scheduled and event/service driven external penetration testing. Conduct vulnerability scanning and be able to interpret the results. Tracks and coordinate the security patching activities with relevant teams and provide the required support. Assess change request for the risk it poses to application and databases security and review the subsequent impact on operations. Approve the request after checking for approval from necessary authorities. Examine mechanisms and technologies in achieving and optimizing security controls and processes. To provide support and analysis during and after a security incidents, as necessary. Analyzes general information assurance-related technical problems and provide support in solving these problems. Research security enhancements and make recommendations to management. Coordinate the activities related to Information Security Projects.<br>Education Minimum Bachelor Degree in IT, Computer Science, Cyber Security, Business Administration or related field.<br>Experience Minimum 6 years of experience in IT domain, penetration testing, professional experience in corporate Applications Security, Analysis and Solutions Delivery or in any similar role.<br><br>Please refer to our privacy policy to know more about how we process your personal data

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.