Plumbing Engineer

<p>Job Title: Project Engineer RLP Duration: Permanent Location: Doha Job Description: Experience of leading projects (as Project Engineer and not as Electrical SME) of: • Reconfiguration of power distribution systems • designing new protection systems • upgrading electrical equipment (e.g., switchgears, transformers, generators, UPS, etc.) • Experience in brownfield projects • Experience of engineering contractor's performance management • Experience of developing (or contributing to) Procurement Strategy JOB PURPOSE / OBJECTIVE Is the project's resolute representative from the Technical Organization throughout the life of the project and shall function as an integral part of the project team. Actions must be consistent with the project economics and support the project execution plan. Provide input during the FEED, Detail Design, Construction and Startup phases of the project. KEY ACCOUNTABILITIES Design Responsibilities • Lead project team through all aspects of technology selection, design basis, and process design. • Provides input and leads the review of contractor design of PFDs, P&IDs, plot plans, heat and energy material balances, design of new chemicals, process design, etc. • Ensure design has appropriate Advance Process Control System tools incorporated for process optimization. • Review and provide feedback on designs, equipment selections, and construction plans with other project team members. • Participate in project HAZOPs, alarm objective analysis, and project MOC HSE evaluations after HAZOP. • Leads process control, interlock, shutdown logic, DCS graphical display, alarm display design. • Review and approve necessary operations procedures and training from a project process perspective to include normal operation, startup, shutdown, environmental limits, and emergency shutdown. • Participate in the MOC process by providing technical inputs and evaluating recommendations to ensure operational feasibility and compliance to safety standards. • Arrange process-related expert consulting services as needed. • Coordinate all project economic studies with company Strategy Group.</p><p>• Required (Qualification): Bachelor’s Degree in Engineering (Chemical/ Electrical / Mechanical/ Civil). • Preferred (Qualification): Master Degree in Engineering (Chemical/ Electrical / Mechanical/ Civil). • Experience • Required (Years / Industry): 5-7 years of experience in the O&G Industry. • Preferred (Years / Industry):Similar experience in Petrochemicals Industry. • Languages • Required (Language / Level4): English - proficient • Preferred (Language / Level4): Arabic - working knowledge</p>

<p>Job Title: Project Engineer RLP Duration: Permanent Location: Doha Job Description: Experience of leading projects (as Project Engineer and not as Electrical SME) of: • Reconfiguration of power distribution systems • designing new protection systems • upgrading electrical equipment (e.g., switchgears, transformers, generators, UPS, etc.) • Experience in brownfield projects • Experience of engineering contractor's performance management • Experience of developing (or contributing to) Procurement Strategy JOB PURPOSE / OBJECTIVE Is the project's resolute representative from the Technical Organization throughout the life of the project and shall function as an integral part of the project team. Actions must be consistent with the project economics and support the project execution plan. Provide input during the FEED, Detail Design, Construction and Startup phases of the project. KEY ACCOUNTABILITIES Design Responsibilities • Lead project team through all aspects of technology selection, design basis, and process design. • Provides input and leads the review of contractor design of PFDs, P&IDs, plot plans, heat and energy material balances, design of new chemicals, process design, etc. • Ensure design has appropriate Advance Process Control System tools incorporated for process optimization. • Review and provide feedback on designs, equipment selections, and construction plans with other project team members. • Participate in project HAZOPs, alarm objective analysis, and project MOC HSE evaluations after HAZOP. • Leads process control, interlock, shutdown logic, DCS graphical display, alarm display design. • Review and approve necessary operations procedures and training from a project process perspective to include normal operation, startup, shutdown, environmental limits, and emergency shutdown. • Participate in the MOC process by providing technical inputs and evaluating recommendations to ensure operational feasibility and compliance to safety standards. • Arrange process-related expert consulting services as needed. • Coordinate all project economic studies with company Strategy Group.</p><p>• Required (Qualification): Bachelor’s Degree in Engineering (Chemical/ Electrical / Mechanical/ Civil). • Preferred (Qualification): Master Degree in Engineering (Chemical/ Electrical / Mechanical/ Civil). • Experience • Required (Years / Industry): 5-7 years of experience in the O&G Industry. • Preferred (Years / Industry):Similar experience in Petrochemicals Industry. • Languages • Required (Language / Level4): English - proficient • Preferred (Language / Level4): Arabic - working knowledge</p>

???? Welcome to Your Next Adventure!<br><br>???? What You’ll Get Your Hands On<br><br>Design and build backend services using . NET Core 8 and ensure they integrate smoothly with other parts of the system. Optimize database performance through query optimization and implementing efficient data models in Postgre SQL, Mongo DB, and Dynamo DB. Participate in system design discussions to contribute to architectural improvements and ensure scalability and maintainability of services. Conduct code reviews to ensure adherence to coding standards and provide feedback to improve team performance. Implement refactoring efforts to improve existing codebases for better efficiency and readability. Write unit tests, integration tests, and ensure high test coverage for backend services. Troubleshoot and debug complex issues in both production and development environments. Document technical decisions, systems, and processes to support team knowledge sharing and future development. Participate in production deployments, ensuring that all systems function as expected after new releases.<br><br>????‍♂️ The Magic You Bring<br><br>7+ years of experience in backend development, with 5+ years of experience working specifically with . NET Core. Proficiency in RESTful services and g RPC design and development, with a focus on maintainability and scalability. Expertise in relational databases like Postgre SQL and non-relational databases like Mongo DB and Dynamo DB. Familiarity with message brokers such as Rabbit MQ and understanding of asynchronous operations and distributed systems. Deep understanding of software design patterns (e.g., Singleton, Factory, Strategy) and the ability to refactor and optimize existing codebases. Experience with code refactoring techniques, improving code structure and maintainability while preserving functionality. Experience in conducting unit testing, integration testing, and performance testing to ensure application robustness.<br><br>✨ Bonus Points If You Have<br><br>Strong experience in diagnosing and resolving complex performance issues, such as memory leaks, using advanced profiling and optimization tools. Ability to lead large-scale projects, ensuring alignment with both technical and business objectives. Experience in mentoring junior developers and guiding team growth. Familiarity with load testing and performance tuning. Ability to contribute to technical discussions and offer creative solutions. Experience with diagramming tools like Miro<br><br>Inside Snoonu’s Universe<br><br>Snoonu is Qatar’s homegrown Super App, reinventing daily life with blazing-fast delivery, ride-hailing, and shopping - all in one place. Powered by tech, driven by a global team, and obsessed with making life easier.<br><br>The Dream We’re Chasing<br><br>To be the first Qatari Super App that propels the region and its community through innovation and technology. We envision a global expansion where what we do surpasses norms and limitations every time.<br><br>The Quest We’re On<br><br>To radically transform how people live by leveraging technology to connect them with endless possibilities.<br><br>Our Everyday Superpowers<br><br>???? Be Customer Obsessed: “Focus on the customer and all else will follow.”<br><br>???? Act with Integrity: “We are honest, ethical, and trustworthy in everything we do.”<br><br>???? Be Curious and Creative: “We constantly innovate and create solutions to bring a lasting positive impact.”<br><br>????Lead by Example and Take Ownership: “Be the change you want to see and take ownership.”<br><br>???? Work Smart and Deliver Results: “You can do more by doing less, better, and faster.”<br><br>????‍???? It's All About People: “Be a team player; together we are stronger.”<br><br>???? Perks & Work-life Magic At Snoonu<br><br>???? Remote & Global Vibes – Collaborate with a worldwide crew.<br><br>???? Brain Boosters – Learning budgets, access to courses, and tools for your growth.<br><br>???? Builder’s Playground – Own your tasks, own your path! We’re big on autonomy.<br><br>???? Flexible Time Off – We take recharging seriously. Generous leave and wellness policies.<br><br>????️ Agile Everything – Scrum isn’t a buzzword here. It’s how we roll, from product to ops.<br><br>Beyond the Code: Giving Back Matters<br><br>We don’t just build app. We’re committed to doing business sustainably and giving back to the community that fuels us. From eco-conscious practices to CSR projects, we’re always finding ways to do better—and we invite you to be a part of that mission.<br><br>Diversity Isn’t Just a Buzzword<br><br>At Snoonu, fairness and inclusion are the foundation of everything we do. We’re proud to be an equal opportunity workplace that welcomes people from every walk of life. Be bold. Be you. Thrive here.<br><br>Let’s Build the Future Together<br><br>Apply now to join a tech team where your code sparks change, your voice is heard, and your growth is guaranteed. Let’s make some tech magic together.<br><br>Stay in the loop—connect with us on Linked In!

Hiring: Senior Data Architect (Data & AI) Location: Doha, Qatar Industry: Banking / Financial Services Experience: 12+ years overall (min. 7 years in Data Architecture) GCC/Qatar Banking Experience Mandatory<br>Role Overview Strategic role responsible for governing the Enterprise Data Architecture framework supporting Data Analytics and AI initiatives across the organization. Strong focus on Responsible AI, data governance, and enterprise-scale architecture design. Key Responsibilities Govern and oversee the Enterprise Data Architecture framework supporting Data Analytics and AI initiatives. Define and maintain conceptual, logical, and physical data models aligned with business, analytics, and AI requirements. Review and validate data architecture designs, end-to-end data flows, data lineage, and integration patterns for compliance with Data Governance, Data Quality, Security, and Privacy requirements. Assess AI use cases from a technical architecture lens — data sourcing, integration, scalability, performance, and alignment with target architecture. Establish technical controls for Responsible AI (RAI) — data validation, bias detection, explainability, traceability, and monitoring. Evaluate vendor solutions for alignment with enterprise architecture standards, integration, security, and performance. Conduct data-focused assessments of third-party solutions for data protection, privacy, and regulatory compliance. Review BRS, solution designs, and Post-Implementation Reviews (PIR) from a data architecture perspective. Govern data integration frameworks — ETL/ELT, APIs, streaming, and batch data flows. Support regulatory compliance initiatives, audits, and architecture governance forums. Act as SME in Data Governance, AI Governance, Responsible AI, and Architecture Review forums. Required Skills & Experience7–10+ years in Data Architecture, Enterprise Data Management, Data Engineering, or related disciplines — banking/financial services experience required, GCC/Qatar preferred. Strong grasp of enterprise data architecture, data modeling, integration, and governance frameworks. Hands-on knowledge of modern data platforms — data warehouses, lakehouses, ETL/ELT, analytics ecosystems. Understanding of AI/ML data ecosystems and Responsible AI principles. Experience reviewing architecture across on-prem, cloud, and hybrid environments. Familiarity with Data Governance, Data Quality, Metadata Management, and regulatory data requirements. Strong stakeholder management and communication skills across business, tech, risk, and compliance teams. Certifications such as TOGAF, DAMA, CDMP, or Cloud Architecture certifications preferred. Immediate joiners preferred.

Position Purpose Summary Principal Information Security Assurance Engineer/ Specialist lead and enforce enterprise-wide security assurance initiatives by evaluating and strengthening security mechanisms across systems, applications, and databases. Conduct comprehensive audits to detect and prevent unauthorized or malicious activities by users and administrators. Drive the adoption and continuous improvement of a secure SDLC framework across the be IN. Oversee and execute regular penetration testing and vulnerability assessments to safeguard the integrity, confidentiality, and availability of information assets. Provide strategic, administrative, and technical leadership to support the Director of Information Security in developing and implementing robust cybersecurity strategies.<br>Key Responsibilities and Accountabilities Review audit log of user applications, profile administration activities and privileged users, review objects/services access and usage. Audit operational change due to the change request. Audit privileged level access and changes to services, applications, databases. Ensure security mechanisms are considered within the SDLC. Conduct periodically internal penetration testing in assigned areas and contribute to the assessment of the security posture across all of infrastructure and oversee scheduled and event/service driven external penetration testing. Conduct vulnerability scanning and be able to interpret the results. Tracks and coordinate the security patching activities with relevant teams and provide the required support. Assess change request for the risk it poses to application and databases security and review the subsequent impact on operations. Approve the request after checking for approval from necessary authorities. Examine mechanisms and technologies in achieving and optimizing security controls and processes. To provide support and analysis during and after a security incidents, as necessary. Analyzes general information assurance-related technical problems and provide support in solving these problems. Research security enhancements and make recommendations to management. Coordinate the activities related to Information Security Projects.<br>Education Minimum Bachelor Degree in IT, Computer Science, Cyber Security, Business Administration or related field.<br>Experience Minimum 6 years of experience in IT domain, penetration testing, professional experience in corporate Applications Security, Analysis and Solutions Delivery or in any similar role.<br>Please refer to our privacy policy to know more about how we process your personal data

Position: Contracts Engineer Duration: Permanente Location: Ras Laffan, Qatar Industry: EPC / Oil & Gas Experience: 10–15 years<br>Job Description:Provide contracts support to management & Projects Team in the preparation and / or review of contracts / subcontracts / supplier agreements. General contract administration duties, including the handling of major change orders, preparation of contractual / general correspondence, claims and negotiations of EPC, oil & gas and other projects.<br>Key Accountabilities:Contract & Change Order Development and Negotiation. Support DOPET management team in handling major change orders, claims and negotiations of EPC, oil & gas and general projects. Ability to prepare and edit contracts between clients, subcontractors and suppliers. Review, respond and negotiate claims and change order requests received from subcontractors and suppliers. Contract Analysis, Compliance & Administration. Review extensive contract documents to extract critical terms and conditions. Ensure compliance of subcontractors and suppliers with terms & conditions of respective contracts. Create organized summaries of essential clauses for easy reference. Ensure all project activities adhere to contractual agreements. Support project teams in the preparation of general correspondence. Administer the contractual daily requirements and reporting of claim and variation progress. Handle breach of contracts in a timely manner.<br>Risk Management:Conduct detailed risk assessments at various stages of the project lifecycle. Identify potential risks and develop strategies to mitigate them effectively. Quality, Health, Security, Safety and Environment. Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Contracts to guarantee employee safety and delivery of high-quality products/services.<br>Qualifications & Experience:Bachelor’s degree in engineering/quantity surveying, Construction Management, Law or related field.10–15 years of experience in Oil & Gas EPC projects. Proven experience as a Contracts Engineer or similar role in the oil & gas industry. Strong understanding of contract law and risk management principles. Excellent negotiation skills with strong attention to detail.<br>Preferred (Years/ Job Level/ Industry):CPCM Certified Professional Contract Manager / CCM Contract & Commercial Management with strong Contracts Administration experience with company setting in EPIC (Engineering, Procurement, Installation and Commissioning), Shutdown and Manpower Supply.

Job Title – VSAT L2 Engineer / Satellite Communication Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description:<br>Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Perform deep analysis of: VSAT link failures and instability Low SNR / high BER issues Hub-to-remote communication failures Network congestion impacting satellite links Identify root causes: Alignment issues RF interference Hardware faults (modem, antenna, RF chain) Weather-related impairments<br>2. Incident Resolution & Service Restoration Own and resolve P1/P2 incidents escalated from L1Drive service restoration within MTTR targets Coordinate with: Field engineers for antenna alignment Hub/NOC teams for configuration changes Vendors/OEMs<br>3. RF & Satellite Analysis Analyze: Link budget parameters Carrier performance Uplink/downlink issues Troubleshoot: Rain fade / atmospheric interference Power level imbalance Frequency/interference issues<br>4. Root Cause Analysis (RCA) Perform RCA for: Chronic link failures Repeated VSAT downtime Provide: Corrective actions Preventive measures (CAPA)<br>5. Change & Maintenance Support Support: VSAT installations and migrations Hub upgrades and configurations Frequency/power adjustments Perform: Pre-checks and post-validation Risk and impact analysis<br>6. Vendor & Field Coordination Coordinate with: OEMs (Hughes, Gilat, i Direct, etc.) Field service teams Satellite service providers Manage TAC/vendor escalations<br>7. Performance Optimization Monitor and improve: Link stability Throughput Uptime Identify and fix: Congestion issues RF inefficiencies<br>8. L1 Support & Governance Provide technical guidance to L1 team Validate escalations and improve troubleshooting quality Enhance SOPs and knowledge base<br>9. Reporting & Governance Prepare: RCA reports Performance reports Incident analysis Participate in: Problem management reviews Service improvement initiatives<br>Required Technical Skills Strong knowledge of: VSAT systems (Hub, Remote, Satellite link) RF concepts (SNR, BER, Eb/N0, power levels) Satellite communication principles Understanding of: IP networking and routing basics Hands-on experience with: VSAT platforms (Hughes, i Direct, Gilat) Monitoring tools and diagnostics.<br>Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Ensuring compliance with objectives established in the development and execution, at the expected time and with the required quality, of the works related to the Requisitions of which it is Originator:<br>Technical level required. Scope of work defined. Budget of hours assigned. Corporate and Project procedures. Schedule<br>Responsible of the complete development of the cycle of “Technical Purchase” of the assigned equipment. Full cooperation with the Client (response of comments at the expected time and with the required quality), other Departments (Technical Office, Process, Procurement, Inspection, Projects ...), making every effort to provide the technical information needed to develop their own work. As Requisitions Originator, sufficient capacity and hierarchy to request and demand the necessary collaboration at the appropriate level of technical quality and schedule to the other Departments with influence into the equipment which it is ultimately responsible. Attendance at Project meetings when required. Review assigned activities and Include information about activities completed in TAES application in weekly basis. Identify technical and economical improvements opportunities in their work area and propose them. Propose Lessons Learned and Value Engineering actions. Take responsibility of the own professional growth, taking advantage of any learning opportunity. Proper use of the different computer tools:<br>Smart Materials (Marian). Document Management System (Documentum).e VDDR & e Ges Doc. IAP. TAFS. Lessons Learned System.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Technical:<br>Collaborate with the team member integration. Analyze and implement contractual documentation and normative To develop following activities for Equipment and Electrical material under its responsibility:Sizing Study Technical Specifications Requisitions MTOTechnical Bid Evaluation Follow-up to the purchase orders to comply with the milestones related to information and equipment delivery. Coordinate information and requirements with disciplines directly related to Electrical Department (Purchasing, Inspection, Projects). To supervise and participate in the team work performance as guideline by Electrical team Leader. To assure properly use of the management tools:Smart Plant Materials (Marian). Document Management System (Documentum). VDDR & IAP<br>Additional to above activities, to support during proposal development:<br>Collaborate with Cost estimation for proposals. Development of MTO for Equipment and material Installations To prepare deviations and clarifications lists Design Management:Collaborate with Team leader with team members integration To identify difficulties during the work performance and report to Team leader in order to be solved. To share information for proper project performance.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Technical:<br>Calculating, specifying, designing, selecting the different pieces of equipment under his/her responsibility. Prepare C&E diagrams, Control Narratives, Vessels sketches. P&IDs revision and comments. Participation in HAZOP and SIL studies: implement and close the Actions Items corresponding to Instrumentation Discipline. Preparation of Requisitions for Inquiries. Carry out Technical Tabulations. Interact with vendors (meetings and correspondence) intending to resolve all technical clarifications. Preparation of Vendor Selection Reports for the awarding of the Technical Bid. Preparation of Requisitions for Purchase. Approve and follow up on information supplied by vendors, be it supplied by Instrumentation Discipline or by other disciplines. If needed, and base on Department Manager criterion, Specialist can support with Construction and Commisioning phases, moving at Site. For all PO’s under his responsibility, ensure that corresponding targets are achieved, regarding to:Technical Level. Men Hours Budget. Quality Levels and Procedural Compliance (PDTs, ITGs). Planning.3D model review and isometric checking.<br>Management:<br>Coordinating exchange of required information with other disciplines (Piping, Electricity, Mechanical, Vessels; Civil; Construction; Process, Purchasing and Inspection) Supervise Purchase Orders and Design activities under his/her responsibility, in order to comply with established milestones regarding the submittal of information and equipment delivery. Lessons Learned. Notification of Design Changes, having a log of Changes for requisitions under his/her responsibility. Coordinating, taking into account the Project Schedule, the data sheets issue, technical tabulations and activities related with requisition under his/her responsibility, having the log weekly updated. Detecting situations that interfere with the team work, reporting back to the Discipline Leader, for the prompt implementation of corrective actions. Using work tools properly and correctly Maintain updated the electronic filing system “Documentum” according with the Project procedures. Maintain updated the List of holds.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

Our engineers are the technical visionaries behind our innovative solutions. Globally recognized for delivering cutting-edge systems, you’ll tackle complex challenges, collaborate across functions, and lead advancements that shape our industry. Supported by a culture of flexibility, growth, and innovation, join us to create a lasting legacy in safety and simulation.<br><br>Description<br><br>Provide technical support for Flight Simulator Training Devices (FSTDs) and other training devices, including attending maintenance calls, device setup, conversions, demonstrations, simulator flight tests, and snag clearance activities. Independently perform Preventive Maintenance Tasks (PMTs), Daily Readiness (DR), recurrent QTG runs, Aircraft Database (ADB) updates, and IOS Lesson Plan (LP) updates on training devices and associated systems, ensuring all tasks are completed in accordance with established standards. Ensure deficiencies identified during maintenance, readiness, or QTG activities are properly followed up, actioned, and closed within required timelines. Diagnose, troubleshoot, and resolve training device issues, including Aircraft on Ground (AOG) events and issues raised by National Aviation Authorities (NAAs). Perform hardware refurbishment and modifications, identify recurring issues, and contribute to the development of permanent corrective solutions. Monitor Sim Hub and Sim Issues for updates and use the Computerized Maintenance Management System (CMMS) to record, track, review, update, and monitor deficiencies and maintenance activities. Produce reports for TCOPS Management to support performance monitoring and trend analysis. As assigned, act in roles such as Shift Lead, Team Lead, Device Caretaker, or Task Caretaker, managing all aspects of the assigned role autonomously. Create, improve, and update procedures and guidelines for new, routine, and non-routine tasks. Collaborate with FSTD Technical Specialists on issues requiring advanced testing and troubleshooting, and support special projects based on Training Center operational needs. Mentor and provide On-the-Job Training (OJT) to junior colleagues, supporting complex tasks and corrective maintenance activities. Continuously develop technical knowledge and skills to progress toward subject matter expertise in one or more FSTD systems (e.g., Visual, Motion, Flight Controls, QTGs). Comply with all local and global CAE Environmental Health & Safety (EHS) standards, instructions, and safe working procedures, exercising duty of care for personal health and safety and that of others.<br><br>Minimum Qualifications<br><br>Technical College Diploma or Degree in Electronics, Electrical, Mechanical, Aeronautical, or Aerospace Engineering. Minimum of 7 years of relevant experience supporting Flight Simulation Training Devices or comparable technical systems. Excellent command of the English language, both written and spoken. Strong customer orientation with the ability to act professionally and tactfully in sensitive situations. Demonstrated initiative and ability to work independently with minimal supervision. Ability to work flexible shifts and adapt to changing work schedules and shift patterns. Solid understanding of aircraft and FSTD terminology. Ability to interpret schematics, drawings, and other technical documentation related to FSTDs. Proven capability to perform Preventive Maintenance Tasks and Daily Readiness activities on FSTDs. Strong troubleshooting skills across electronic, electrical, hydraulic, and pneumatic systems. Proficiency in the use of test equipment and software diagnostic tools. Good understanding of aircraft systems, avionics, motion, and visual systems. Good computer skills, including proficiency with Microsoft Office applications (Word, Excel, etc.). Basic knowledge of computer architecture, networking, operating systems (Windows NT/XP, UNIX, Linux, AIX), and programming languages (C, C++, FORTRAN). Basic knowledge of local and international regulations (EASA, FAA, etc.) applicable to Flight Simulation Training Devices.<br><br>Preferred Qualifications<br><br>Prior experience acting in a lead role (Shift Lead, Team Lead, Device Caretaker, or equivalent). Experience mentoring junior engineers or technicians in a simulator or training environment. Exposure to QTG activities, simulator acceptance processes, or authority-related evaluations. Experience supporting multiple FSTD systems or complex training center operations.<br><br>About CAE<br><br>At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we’ve driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success.<br><br>Position Type <br><br>Regular<br><br>Equal Opportunity & Accommodations<br><br>CAE is committed to providing equal opportunities to all applicants, regardless of race, nationality, color, religion, sex, gender identity or expression, sexual orientation, disability, neurodiversity, veteran status, age, or other characteristics protected by law. We encourage applicants who may not meet every qualification to apply. Reasonable accommodations are available—contact your recruiter or email CAECarrieres-Careers@cae.com if needed.<br><br>Data Privacy<br><br>Privacy Statement | CAE<br><br>CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Job Title – VSAT L2 Engineer / Satellite Communication Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description:<br>Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Perform deep analysis of: VSAT link failures and instability Low SNR / high BER issues Hub-to-remote communication failures Network congestion impacting satellite links Identify root causes: Alignment issues RF interference Hardware faults (modem, antenna, RF chain) Weather-related impairments<br>2. Incident Resolution & Service Restoration Own and resolve P1/P2 incidents escalated from L1Drive service restoration within MTTR targets Coordinate with: Field engineers for antenna alignment Hub/NOC teams for configuration changes Vendors/OEMs<br>3. RF & Satellite Analysis Analyze: Link budget parameters Carrier performance Uplink/downlink issues Troubleshoot: Rain fade / atmospheric interference Power level imbalance Frequency/interference issues<br>4. Root Cause Analysis (RCA) Perform RCA for: Chronic link failures Repeated VSAT downtime Provide: Corrective actions Preventive measures (CAPA)<br>5. Change & Maintenance Support Support: VSAT installations and migrations Hub upgrades and configurations Frequency/power adjustments Perform: Pre-checks and post-validation Risk and impact analysis<br>6. Vendor & Field Coordination Coordinate with: OEMs (Hughes, Gilat, i Direct, etc.) Field service teams Satellite service providers Manage TAC/vendor escalations<br>7. Performance Optimization Monitor and improve: Link stability Throughput Uptime Identify and fix: Congestion issues RF inefficiencies<br>8. L1 Support & Governance Provide technical guidance to L1 team Validate escalations and improve troubleshooting quality Enhance SOPs and knowledge base<br>9. Reporting & Governance Prepare: RCA reports Performance reports Incident analysis Participate in: Problem management reviews Service improvement initiatives<br>Required Technical Skills Strong knowledge of: VSAT systems (Hub, Remote, Satellite link) RF concepts (SNR, BER, Eb/N0, power levels) Satellite communication principles Understanding of: IP networking and routing basics Hands-on experience with: VSAT platforms (Hughes, i Direct, Gilat) Monitoring tools and diagnostics.<br>Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

About the role:<br>We are currently recruiting for Licensed Aircraft Engineers (B1) under Line Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer (B1), you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes:<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br>Join us as we dare to achieve what’s never been done before.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>Together, everything is possible<br>How to apply :If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

About the Role<br>Qatar Airways are pleased to announce an incredibly exciting opportunity to join our Technical Engineering team as a Licensed Aircraft Engineer Level 1 who is responsible to deliver aircraft Maintenance activities to directly support flight operations maintenance checks and duties within their authority as a Licensed Aircraft Engineer. To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation.<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways procedures. Reviews work procedures, standards and proposes improvements where procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished by the Mechanics. Ensure tasks are performed to meet company/Customer standard and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his range of his authority, and ensure that aircrafts or components serviceability standards are maintained to meet schedule requirements. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. When supervising the wok of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. As per company requirement, must arrange to have equipment, heavy vehicle driving license to facilitate Maintenance task requirements. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>How to apply:If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.<br>Together, everything is possible

About the Role<br>Qatar Airways are pleased to announce an incredibly exciting opportunity to join our Technical Engineering team as a Licensed Aircraft Engineer Level 1 who is responsible to deliver aircraft Maintenance activities to directly support flight operations maintenance checks and duties within their authority as a Licensed Aircraft Engineer. To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation.<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways procedures. Reviews work procedures, standards and proposes improvements where procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished by the Mechanics. Ensure tasks are performed to meet company/Customer standard and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his range of his authority, and ensure that aircrafts or components serviceability standards are maintained to meet schedule requirements. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. When supervising the wok of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. As per company requirement, must arrange to have equipment, heavy vehicle driving license to facilitate Maintenance task requirements. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>How to apply:If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.<br>Together, everything is possible

An international engineering consultancy company is seeking a highly qualified Senior Surface Water Drainage Design Engineer with extensive experience in the planning and design of surface water drainage systems for large-scale highway and infrastructure developments in Qatar. Requirements:Bachelor's degree in Civil Engineering (Master's degree is an advantage). Minimum 15 years of relevant experience in the design of surface water drainage systems for roads and highway infrastructure projects. At least 5 years of experience in GCC countries. Valid MMUP (UPDA) Certificate is mandatory. Proven experience in the hydraulic and hydrological design of stormwater drainage networks, culverts, channels, retention and detention systems, and flood mitigation measures. Strong knowledge of Qatar and international drainage design standards and specifications. Proficiency in relevant engineering software such as Civil 3D, Info Drainage, Info Works ICM, HEC-RAS, HEC-HMS, Micro Drainage, Auto CAD, or equivalent hydraulic modeling tools. Excellent technical, communication, and coordination skills with the ability to work effectively within multidisciplinary engineering teams.

About Agoda<br><br>At Agoda, we bridge the world through travel. Our story began in 2005, when two lifelong friends and entrepreneurs, driven by their passion for travel, launched Agoda to make it easier for everyone to explore the world.<br><br>Today, we are part of Booking Holdings [NASDAQ: BKNG], with a diverse team of over 7,000 people from 90 countries, working together in offices around the globe. Every day, we connect people to destinations and experiences, with our great deals across our millions of hotels and holiday properties, flights, and experiences worldwide.<br><br>No two days are the same at Agoda. Data and technology are at the heart of our culture, fueling our curiosity and innovation. If you’re ready to begin your best journey and help build travel for the world, join us.<br><br>Get to Know Our Team<br><br>The Engineering department oversees all Agoda’s ML and software related requirements. Our goal is to enable and increase Agoda’s business through creative approaches and the implementation of powerful resources such as operational and analytical databases, ML driven solutions, queue systems and data monitoring tools. We hire the brightest minds from around the world to take on this challenge and equip them with the knowledge and tools that contribute to their personal growth and success while supporting our company’s culture of diversity and experimentation. The role the engineering team plays at Agoda is critical as business users, product managers, and many others rely on us to empower their decision making. We are equally dedicated to our customers by improving their search experience with faster results and protecting them from any fraudulent activities. Data is interesting only when you have enough of it, and we have plenty. This is what drives up the challenge as part of the ML engineering squad, but also the reward. We work across structured and non-structured data at scale. For example, our current ML models process millions of images every day to try and enhance the experience that our users get from our app.<br><br>Why Agoda Engineering Team (ML role)?<br><br>Our engineering teams are at the intersection of business analytics, ml engineering, data warehousing and software engineering. Our job involves dealing with distributed systems, stream processing, ml modeling and computation at tens of PB Scale. We focus on software engineering related to data replication, storage, centralized computation, and Data API’s. By providing our users with ML products/tools, shared frameworks, and ML services, we enable our company to validate strategic decisions, make smarter choices, and react to the fast-changing world. We are a small but passionate team with people from different nationalities working together on a single goal.<br><br>In this Role, you will get to:<br><br>Lead the team technically in improving scalability, stability, accuracy, speed and efficiency of our existing ML systems and processes. Build, administer and scale ML processing pipelines. Be comfortable navigating the following technology stack: Python3, Scala Spark, scripting (Bash/Python), Hadoop, SQL, S3 etc. Should be able to understand internals of ML models such as Light GBM, Random Forest, CNN, Regression models, etc Design, build, test and deploy new libraries, frameworks or full systems for our core systems while keeping to the highest standards of testing and code quality. Work with experienced engineers and product owners to identify and build tools to automate many large-scale data management / analysis tasks. We believe in end-to-end ownership; this role will involve taking and building systems that enable us to deliver ML models to production at a scale.<br><br>What You’ll need to Succeed:<br><br>Bachelor’s degree in computer science /information systems/engineering/related field 6+ years of experience in software engineering with a minimum of 4+ years in MLExpert in SQL, Python3, and JVM based programming language – ie, Java or Scala Expert in software design/design patterns, functional programming and object-oriented programming. Analytical problem-solving capabilities & experience. A strong engineering driven mindset will be required to succeed in this role.<br><br>It’s great if you have:<br><br>Good understanding of Hadoop ecosystems and Big Data architecture and techologies Experience working with Open-source products Experience with Scala development Working in an agile environment using test driven methodologies Systems administration skills in Linux<br><br>Benefits<br><br>Hybrid Working Model WFH Set Up Allowance30 Days of Remote Working from anywhere globally every year Employee discount for accommodation globally Global team of 90+ nationalities40+ offices and 25+ countries Annual CSR / Volunteer Time off Benevity Subscription for employee donations Volunteering opportunities globally Free Headspace subscription Free Odilo & Udemy subscriptions Access to Employee Assistance Program (third party for personal and workplace support) Enhanced Parental Leave Life, TPD & Accident Insurance<br><br>#telaviv #jerusalem #IT #ENG #4 #sanfrancisco #sanjose #losangeles #sandiego #oakland #denver #miami #orlando #atlanta #chicago #boston #detroit #newyork #portland #philadelphia #dallas #houston #austin #seattle #sydney #melbourne #perth #toronto #vancouver #montreal #shanghai #beijing #shenzhen #prague #Brno #Ostrava #cairo #alexandria #giza #estonia #paris #berlin #munich #hamburg #stuttgart #cologne #frankfurt #hongkong #budapest #jakarta #bali #dublin #telaviv #milan #rome #venice #florence #naples #turin #palermo #bologna #tokyo #osaka #kualalumpur #malta #amsterdam #oslo #manila #warsaw #krakow #doha #alrayyan #riyadh #jeddah #mecca #medina #singapore #seoul #barcelona #madrid #stockholm #zurich #taipei #tainan #taichung #kaohsiung #bangkok #Phuket #istanbul #london #manchester #edinburgh #hcmc #hanoi #lodz #wroclaw #poznan #katowice #rio #salvador #newdelhi #bangalore #bandung #yokohama #nagoya #okinawa #fukuoka #jerusalem #IT #4 #newdelhi #Pune #Hyderabad #Bangalore #Mumbai #Bengaluru #Chennai #Kolkata #Lucknow #sanfrancisco #sanjose #losangeles #sandiego #oakland #denver #miami #orlando #atlanta #chicago #boston #detroit #newyork #portland #philadelphia #dallas #houston #austin #seattle #sydney #melbourne #perth #toronto #vancouver #montreal #shanghai #beijing #shenzhen #prague #Brno #Ostrava #cairo #alexandria #giza #estonia #paris #berlin #munich #hamburg #stuttgart #cologne #frankfurt #hongkong #budapest #jakarta #bali #dublin #telaviv #milan #rome #tokyo #osaka #kualalumpur #amsterdam #oslo #manila #warsaw #krakow #bucharest #moscow #saintpetersburg #capetown #johannesburg #seoul #barcelona #madrid #stockholm #zurich #taipei #bangkok #Phuket #istanbul #london #manchester #edinburgh #kiev #hcmc #hanoi #wroclaw #poznan #katowice #rio #salvador #IT #4 #5<br><br>Please review our Hiring Process Guidelines before your interview — click here to learn how interviewing at Agoda works.<br><br>Discover More About Working At Agoda<br><br>Agoda Careers https://careersatagoda.com Facebook https://www.facebook.com/agodacareers/Linked In https://www.linkedin.com/company/agoda You Tube https://www.youtube.com/agodalife<br><br>Equal Opportunity Employer <br><br>At Agoda, we pride ourselves on being a company represented by people of all different backgrounds and orientations. We prioritize attracting diverse talent and cultivating an inclusive environment that encourages collaboration and innovation. Employment at Agoda is based solely on a person’s merit and qualifications. We are committed to providing equal employment opportunity regardless of sex, age, race, color, national origin, religion, marital status, pregnancy, sexual orientation, gender identity, disability, citizenship, veteran or military status, and other legally protected characteristics.<br><br>We will keep your application on file so that we can consider you for future vacancies and you can always ask to have your details removed from the file. For more details please read our privacy policy.<br><br>Disclaimer<br><br>We do not accept any terms or conditions, nor do we recognize any agency’s representation of a candidate, from unsolicited third-party or agency submissions. If we receive unsolicited or speculative CVs, we reserve the right to contact and hire the candidate directly without any obligation to pay a recruitment fee.

Our engineers are the technical visionaries behind our innovative solutions. Globally recognized for delivering cutting-edge systems, you’ll tackle complex challenges, collaborate across functions, and lead advancements that shape our industry. Supported by a culture of flexibility, growth, and innovation, join us to create a lasting legacy in safety and simulation.<br><br>Description<br><br>Provide technical support for Flight Simulator Training Devices (FSTDs) and other training devices, including attending maintenance calls, device setup, conversions, demonstrations, simulator flight tests, and snag clearance activities. Independently perform Preventive Maintenance Tasks (PMTs), Daily Readiness (DR), recurrent QTG runs, Aircraft Database (ADB) updates, and IOS Lesson Plan (LP) updates on training devices and associated systems, ensuring all tasks are completed in accordance with established standards. Ensure deficiencies identified during maintenance, readiness, or QTG activities are properly followed up, actioned, and closed within required timelines. Diagnose, troubleshoot, and resolve training device issues, including Aircraft on Ground (AOG) events and issues raised by National Aviation Authorities (NAAs). Perform hardware refurbishment and modifications, identify recurring issues, and contribute to the development of permanent corrective solutions. Monitor Sim Hub and Sim Issues for updates and use the Computerized Maintenance Management System (CMMS) to record, track, review, update, and monitor deficiencies and maintenance activities. Produce reports for TCOPS Management to support performance monitoring and trend analysis. As assigned, act in roles such as Shift Lead, Team Lead, Device Caretaker, or Task Caretaker, managing all aspects of the assigned role autonomously. Create, improve, and update procedures and guidelines for new, routine, and non-routine tasks. Collaborate with FSTD Technical Specialists on issues requiring advanced testing and troubleshooting, and support special projects based on Training Center operational needs. Mentor and provide On-the-Job Training (OJT) to junior colleagues, supporting complex tasks and corrective maintenance activities. Continuously develop technical knowledge and skills to progress toward subject matter expertise in one or more FSTD systems (e.g., Visual, Motion, Flight Controls, QTGs). Comply with all local and global CAE Environmental Health & Safety (EHS) standards, instructions, and safe working procedures, exercising duty of care for personal health and safety and that of others.<br><br>Minimum Qualifications<br><br>Technical College Diploma or Degree in Electronics, Electrical, Mechanical, Aeronautical, or Aerospace Engineering. Minimum of 7 years of relevant experience supporting Flight Simulation Training Devices or comparable technical systems. Excellent command of the English language, both written and spoken. Strong customer orientation with the ability to act professionally and tactfully in sensitive situations. Demonstrated initiative and ability to work independently with minimal supervision. Ability to work flexible shifts and adapt to changing work schedules and shift patterns. Solid understanding of aircraft and FSTD terminology. Ability to interpret schematics, drawings, and other technical documentation related to FSTDs. Proven capability to perform Preventive Maintenance Tasks and Daily Readiness activities on FSTDs. Strong troubleshooting skills across electronic, electrical, hydraulic, and pneumatic systems. Proficiency in the use of test equipment and software diagnostic tools. Good understanding of aircraft systems, avionics, motion, and visual systems. Good computer skills, including proficiency with Microsoft Office applications (Word, Excel, etc.). Basic knowledge of computer architecture, networking, operating systems (Windows NT/XP, UNIX, Linux, AIX), and programming languages (C, C++, FORTRAN). Basic knowledge of local and international regulations (EASA, FAA, etc.) applicable to Flight Simulation Training Devices.<br><br>Preferred Qualifications<br><br>Prior experience acting in a lead role (Shift Lead, Team Lead, Device Caretaker, or equivalent). Experience mentoring junior engineers or technicians in a simulator or training environment. Exposure to QTG activities, simulator acceptance processes, or authority-related evaluations. Experience supporting multiple FSTD systems or complex training center operations.<br><br>About CAE<br><br>At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we’ve driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success.<br><br>Position Type <br><br>Regular<br><br>Equal Opportunity & Accommodations<br><br>CAE is committed to providing equal opportunities to all applicants, regardless of race, nationality, color, religion, sex, gender identity or expression, sexual orientation, disability, neurodiversity, veteran status, age, or other characteristics protected by law. We encourage applicants who may not meet every qualification to apply. Reasonable accommodations are available—contact your recruiter or email CAECarrieres-Careers@cae.com if needed.<br><br>Data Privacy<br><br>Privacy Statement | CAE<br><br>CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Senior Horticulturist Engineer to join our team! In this role, you will lead the horticultural planning, supervision, and quality control of landscape works on large-scale infrastructure, urban development, public realm, and commercial projects. You will ensure that planting design, implementation, and maintenance meet project specifications, sustainability requirements, and local environmental conditions, while coordinating closely with multidisciplinary teams and contractors.</p><p>What You ll Be Doing</p><ul><li>Leading the horticultural aspects of landscape projects, including planting design input, species selection, and maintenance strategies.</li><li>Reviewing and approving plant palettes, planting plans, and horticultural specifications to ensure suitability for local climate, soil, and environmental conditions (including arid environments).</li><li>Supervising and monitoring planting works on site, including trees, shrubs, groundcovers, turf, and specialty planting (e.g., rooftop, vertical, and indoor landscapes).</li><li>Assessing plant health and performance and recommending corrective actions (e.g., pruning, replacement, soil improvement, pest/disease management).</li><li>Coordinating horticultural activities with landscape, irrigation, civil, architectural, and MEP disciplines to ensure integrated and conflict-free implementation.</li><li>Conducting regular site inspections and quality audits to verify that planting works meet project standards, specifications, and horticultural best practices.</li><li>Evaluating nursery stock and plant deliveries to ensure quality, size, and health in line with approved submittals.</li><li>Advising on soil preparation, mulching, fertilization, and plant establishment techniques.</li><li>Supporting the development and implementation of maintenance plans, including irrigation schedules, pruning programs, pest and disease control, and seasonal planting.</li><li>Reviewing contractor progress related to horticultural works, identifying deficiencies, and recommending or supervising corrective measures.</li><li>Preparing technical reports, inspection reports, plant health assessments, and submissions with conceptual elements and visual content.</li><li>Providing horticultural guidance during testing, commissioning, and handover of landscape areas to clients or operating authorities.</li><li>Ensuring compliance with health, safety, environmental, and quality requirements within landscape and horticultural operations.</li><li>Mentoring and providing technical support to junior landscape/horticulture staff as needed.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Horticulture (preferred) or a directly related field of study; or a combination of directly related education, experience, and training.</li><li>12 years of experience in large landscape projects involving preservation and maintenance of landscape works.</li><li>Experience in arid terrain with strong understanding of the suitability and performance of plant material in such conditions.</li><li>Ability to interpret complex contract documents, including plans, specifications, and shop drawings.</li><li>Ability to review drawings, specifications, and installations for constructability and compliance with design intent.</li><li>Experience in urban design and supervision, including high-end commercial landscapes.</li><li>Experience in the preparation of reports and submissions, including conceptual elements and visual/horticultural content.</li><li>Advanced proficiency in relevant software, including Vectorworks, AutoCAD, Microsoft Office (Word, Excel, PowerPoint, Outlook), and contemporary digital imagery/visualization software.</li><li>Good written and verbal communication skills in English.</li><li>Must have UPDA/MME registration in Qatar.</li><li>Experience in the GCC region and an understanding of its cultural heritage, particularly as it relates to public realm and landscape design.</li><li>Experience on large-scale infrastructure, public parks, streetscapes, highways, stadium precincts, and other urban landscape developments.</li><li>Familiarity with sustainable horticultural practices, including water-efficient planting, biodiversity enhancement, and integrated pest management (IPM).</li><li>Strong coordination skills, with the ability to work effectively with contractors, nurseries, and multidisciplinary project teams.</li><li>Strong problem-solving and decision-making skills, with high attention to detail and quality management.</li><li>Ability to manage multiple site activities and priorities and meet project deadlines.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Material Engineer will play a crucial role in supporting Ashghal projects, working within the GEC Supervision department. This position involves managing and overseeing material engineering activities, with a focus on maintaining high standards and adhering to project requirements. The successful candidate will contribute to the overall success of infrastructure projects in Qatar.</p><p>Oversee material engineering activities for Ashghal projects, ensuring compliance with project specifications and quality standards. Review and approve material testing and inspection plans, ensuring alignment with project requirements. Conduct regular site visits to monitor material engineering processes and provide guidance to on-site teams. Collaborate with project managers and stakeholders to ensure material engineering activities are integrated into project timelines. Manage and mentor a team of material engineers, providing technical guidance and support. Stay updated with industry trends and advancements in material engineering practices. Prepare and submit comprehensive reports on material engineering activities, including recommendations and findings. Participate in project meetings and provide expert input on material-related matters. Ensure compliance with Ashghal requirements and regulations throughout the project lifecycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Material Engineering or a related field, with a Master's degree preferred.</li><li>A minimum of 12 years of experience in material engineering, with a strong background in infrastructure projects.</li><li>Professional registration or certification in Material Engineering is highly advantageous.</li><li>Proven experience in managing and overseeing material engineering activities for large-scale projects.</li><li>Excellent knowledge of material testing and inspection techniques, and industry standards.</li><li>Strong leadership and mentoring skills, with the ability to guide and develop a team.</li><li>Proficiency in project management software and MS Office suite.</li><li>Excellent communication and interpersonal skills, with the ability to collaborate effectively.</li><li>Willingness to travel and work on-site as required by project needs.</li><li>A proactive and solution-oriented approach to problem-solving.</li><li>Must hold a valid MMUP/UPDA registration (Engineer Classification) in Qatar.</li></ul><p></p></section>