Mechanical Design Engineer Jobs in Qatar

<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Role Summary</strong><br>We are looking for a Security Engineer specializing in firewall technologies to manage, configure, and secure the organization's perimeter and internal network defenses. The role focuses on firewall administration, policy management, and threat prevention.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Deploy, configure, and manage enterprise firewalls (Palo Alto, Fortinet, Cisco ASA/Firepower, or Check Point).</p></li><li><p>Design and maintain firewall rules, policies, NAT, and security zones aligned with best practices.</p></li><li><p>Monitor and respond to security events, alerts, and firewall logs.</p></li><li><p>Perform firewall rule audits, cleanup, and optimization to reduce risk exposure.</p></li><li><p>Manage VPNs (site-to-site and remote access) and secure connectivity.</p></li><li><p>Support threat prevention features — IPS/IDS, URL filtering, application control, and anti-malware.</p></li><li><p>Ensure compliance with security policies, standards, and change-management processes.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>6–10 years of experience in network/information security with a strong firewall focus.</p></li><li><p>Hands-on expertise with at least one leading firewall platform (Palo Alto / Fortinet / Check Point / Cisco).</p></li><li><p>Strong knowledge of network security concepts, VPNs, IPS/IDS, and threat prevention.</p></li><li><p>Bachelor's degree in Computer Science, IT, Cybersecurity, or related field.</p></li><li><p>Certifications preferred: <strong>PCNSE, NSE 4+, CCSA/CCSE</strong>, or <strong>CCNP Security</strong>; <strong>CISSP</strong> a plus.</p></li></ul><p></p></section>

We are looking for an experienced Assistant Project Manager to join our Projects Team and support the successful delivery of restaurant development and fit-out projects.<br>The role will support the end-to-end development of restaurants, from an empty shell-and-core unit through construction, interior fit-out, MEP installation, kitchen and equipment installation, testing, commissioning, and final handover to Operations.<br>The successful candidate will work closely with Design, Engineering, Contractors, Consultants, Procurement, Operations, IT, Marketing, Finance, landlords, and government authorities to ensure projects are delivered safely, on time, within budget, and in line with approved design and brand standards.<br>Key Responsibilities Assist the Project Manager in planning and delivering restaurant construction and fit-out projects. Develop and maintain project schedules, milestones, trackers, action plans, and progress reports. Coordinate contractors, consultants, suppliers, designers, and internal stakeholders throughout the project lifecycle. Monitor site progress, identify potential delays, and ensure timely corrective actions. Conduct regular site inspections to monitor progress, workmanship, quality, and compliance with approved drawings and specifications. Coordinate civil, architectural, structural, MEP, HVAC, plumbing, electrical, fire & life safety, and other building services. Oversee interior fit-out works including flooring, ceilings, painting, joinery, countertops, furniture, glazing, wall finishes, decorative elements, signage, and back-of-house areas. Coordinate kitchen equipment layouts, MEP provisions, delivery, installation, connection, testing, and commissioning. Liaise with architects, interior designers, MEP consultants, kitchen consultants, and other specialists to resolve design and technical issues. Review drawings, shop drawings, material submissions, RFIs, and technical documentation to ensure the latest approved information is implemented on site. Coordinate required permits, inspections, and approvals with Civil Defence, Municipality, MOCI, Kahramaa, landlords/building management, and other relevant authorities. Coordinate with Procurement and suppliers to ensure materials and equipment are available in line with project requirements and timelines. Monitor long-lead items and follow up on potential procurement and delivery delays. Support the Project Manager in reviewing quotations, variations, additional works, and cost implications. Maintain snagging and punch-list records and ensure timely closure of defects. Coordinate testing and commissioning of MEP, kitchen, IT, security, signage, and other systems. Ensure all required as-built drawings, warranties, certificates, manuals, and test reports are collected before handover. Support the Project Manager during restaurant opening and post-opening defect rectification.<br>Qualifications Bachelor’s degree or diploma in Civil Engineering, Architecture, Interior Design, Construction Management, Project Management, or a related field.5–8 years of relevant experience in construction, interior fit-out, hospitality, retail, or restaurant development. Strong experience in restaurant/F&B fit-out and development projects is highly preferred. Proven experience coordinating contractors, consultants, suppliers, and multiple stakeholders. Strong understanding of civil, architectural, MEP, HVAC, kitchen equipment, and interior fit-out works. Good knowledge of construction drawings, BOQs, specifications, project schedules, and site execution. Experience with Primavera P6 is highly preferred, particularly within Qatar/GCC construction environments. MS Project is an advantage. Proficiency in Auto CAD and MS Office, particularly Excel, Word, and Power Point. Knowledge of Qatar/GCC construction practices and authority approval processes is an advantage. Good understanding of restaurant kitchen layouts, equipment requirements, MEP services, exhaust, ventilation, and related systems.<br>The Ideal Candidate We are looking for someone who is hands-on, organized, commercially aware, and solutions-oriented, with the ability to manage competing priorities and maintain momentum across multiple projects.<br>You should be comfortable working in a fast-paced F&B environment where project timelines and restaurant opening dates are critical, and where strong coordination between design, construction, procurement, operations, and technical teams is essential.<br>Interested candidates are invited to submit their updated CV to careers@almuftahsterling.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Ensures the integrity and sustainability of oil &amp; gas Production and Processing Facilities at PS-2 by effective maintenance management of process packaged, rotating, static equipments, hydraulic and pneumatic systems, valves e.g. ESD valves and PSV's, living quarter civil equipments, HVAC systems, material handling, lifting equipments, safety e.g. lifeboats and fire fighting equipments.</p><br><ul><li>Responsible to manage mechanical maintenance implementation programs that match the department quality policy for the integrated oil &amp; gas Production and Processing Facilities at Offshore.</li><li><span>Responsible for the implementation of quality mechanical maintenance, to assure integrity and reliability requirement are met for Offshore assets.</span></li></ul> <br><strong>Required Experience and Skills</strong><br><p>At lest 10 years experience in the installation, maintenance repair and fault finding of similar equipment in the petrochemical industry.</p><br> <br><strong>Educational Qualifications</strong><br><p>B.Sc. in relevant Engineering discipline with an aptitude foe understanding drawings. P &amp; ID's and cause and effects of complex packages, mechanical and rotating equipment/machines in addition to their control systems.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><p><span><b><span>QA/QC Management</span></b>: Develop and implement QA/QC procedures for mechanical and welding works.</span><br></p><br></li><li><p><span><b><span>Inspection Oversight</span></b>: Supervise inspections of piping, welding, and mechanical systems.</span><br></p><br></li><li><p><span><b><span>Standards Compliance</span></b>: Ensure adherence to ASME, API, AWS, and ISO standards.</span><br></p><br></li><li><p><span><b><span>Documentation</span></b>: Prepare quality plans, inspection reports, and audit records.</span><br></p><br></li><li><p><span><b><span>NCR Management</span></b>: Review non‑conformances, recommend corrective actions, and ensure closure.</span><br></p><br></li><li><p><span><b><span>Coordination</span></b>: Liaise with clients, consultants, and subcontractors on quality matters.</span><br></p><br></li></ul><br><span>Requirements<b>Qualifications</b><br></span><ul><li><span>B.E/B. Tech Mechanical<br></span></li><li><span><b>Minimum 12-15 years of exp. in Oil &amp; Gas</b>, Petrochemical, Fertilizers industry in Quality control &amp; Assurance (5-7 year GCC Exp is must).<br></span></li><li><span>Experienced in managing a team of QC Engineers &amp; Inspectors.<br></span></li><li><span>Shutdown/Turnarounds experience is an added advantage.<br></span></li><li><span>Experienced in Field installation of Piping, Structural Steel, Tanks Welding.<br></span></li></ul><b>Mandatory certifications:</b><br><br><ul><li><span> CSWIP 3.2.2 /EWE/IWE, IRCA ISO 9001:2015 Lead Auditor.</span><br></li></ul><ul><li><p>Location: Ras Laffan<br></p><br></li><li><p>Looking for immediate joiners<br></p><br></li></ul>If you are interested, kindly share your CV to celci@madre-me.com.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b><span>Responsibilities</span></b><br></span><ul><li><p><span><b><span>Equipment Installation</span></b><span>: </span><span>Install, </span><span>assemble, </span><span>and </span><span>commission </span><span>mechanical, </span><span>electrical, </span><span>and </span><span>plumbing </span><span>systems </span><span>as </span><span>per </span><span>project </span><span>requirements.</span></span><br></p><br></li><li><p><span><b><span>Corrective Maintenance</span></b><span>: </span><span>Diagnose </span><span>faults </span><span>and </span><span>perform </span><span>repair </span><span>works </span><span>on </span><span>industrial </span><span>machinery, </span><span>electrical </span><span>panels, </span><span>and </span><span>piping </span><span>systems.</span></span><br></p><br></li><li><p><span><b><span>Preventive Maintenance</span></b><span>: </span><span>Carry </span><span>out </span><span>scheduled </span><span>servicing, </span><span>lubrication, </span><span>calibration, </span><span>and </span><span>inspections </span><span>to </span><span>minimize </span><span>downtime.</span></span><br></p><br></li><li><p><span><b><span>Workshop Practices</span></b><span>: </span><span>Perform </span><span>drilling, </span><span>threading, </span><span>tapping, </span><span>grinding, </span><span>welding, </span><span>and </span><span>fitting </span><span>tasks </span><span>with </span><span>precision.</span></span><br></p><br></li><li><p><span><b><span>Safety Compliance</span></b><span>: </span><span>Adhere </span><span>to </span><span>HSE </span><span>protocols, </span><span>permit‑to‑work </span><span>systems, </span><span>and </span><span>safe </span><span>handling </span><span>of </span><span>tools </span><span>and </span><span>equipment.</span></span><br></p><br></li><li><p><span><b><span>Documentation</span></b><span>: </span><span>Maintain </span><span>service </span><span>logs, </span><span>inspection </span><span>reports, </span><span>and </span><span>compliance </span><span>records.</span></span><br></p><br></li><li><p><span><span><b><span>Team Support</span></b>: Assist engineers and supervisors in site coordination, training junior staff, and ensuring smooth workflow.</span></span><br></p><br></li></ul><br><span>Requirements<b>Qualifications</b><br></span><ul><li><p><span>Diploma / ITI in Mechanical, Electrical, or relevant technical discipline.</span><br></p><br></li><li><p><span>Minimum <b>3–5 years of hands‑on experience</b> in industrial projects.</span><br></p><br></li></ul><b>Skills &amp; Competencies</b><br><ul><li><p><span>Strong knowledge of <b>mechanical, electrical, and plumbing systems</b>.</span><br></p><br></li><li><p><span>Proficiency in using hand tools, measuring instruments, and diagnostic equipment.</span><br></p><br></li><li><p><span>Ability to read technical drawings and follow work instructions.</span><br></p><br></li><li><p><span>Effective communication and teamwork skills.</span><br></p><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking experienced <b>FM Operators / Plant Operators</b> to join a large-scale Facilities Management project in Qatar.</p><p><b>Key Requirements:</b></p><ul><li>Technical qualification in <b>HVAC, Mechanical, Electrical or Electromechanical disciplines</b></li><li>Minimum <b>5 years of relevant operational experience</b></li><li>Experience operating and monitoring <b>MEP and building services equipment</b></li><li>Knowledge of <b>HVAC systems, pumps, motors and associated plant equipment</b></li><li>Experience with <b>BMS/control systems</b> is highly desirable</li><li>Able to perform equipment inspections and identify operational abnormalities</li><li>Understanding of preventive maintenance and safe operating procedures</li><li>Facilities Management/building operations experience preferred</li><li>GCC/Qatar experience is an advantage</li><li><b>Arabic and English communication skills required</b></li><li>Willingness to work shifts where required</li></ul><p>The role will support the safe and efficient operation of building systems and equipment across multiple facilities.</p><p><b>Location:</b> Qatar</p><p> <b>Industry:</b> Facilities Management</p><p> <b>Position:</b> Full-Time</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Technical qualification in <b>HVAC, Mechanical, Electrical or Electromechanical disciplines</b></li><li>Minimum <b>5 years of relevant operational experience</b></li><li>Experience operating and monitoring <b>MEP and building services equipment</b></li><li>Knowledge of <b>HVAC systems, pumps, motors and associated plant equipment</b></li><li>Experience with <b>BMS/control systems</b> is highly desirable</li><li>Able to perform equipment inspections and identify operational abnormalities</li><li>Understanding of preventive maintenance and safe operating procedures</li><li>Facilities Management/building operations experience preferred</li><li>GCC/Qatar experience is an advantage</li><li><b>Arabic and English communication skills required</b></li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>• Operate and monitor all treatment processes (screens, aeration, clarifiers, filtration) and adjust pumps/blowers/chemical dosing based on flow rates and SCADA data</span><br></p><br><p><span>• Perform preventive maintenance on pumps, blowers, and gearboxes, and troubleshoot process upsets like sludge bulking or foaming</span><br></p><br><p><span>• Collect wastewater samples and conduct routine lab tests (pH, DO, COD, BOD, MLSS) to optimize chemical treatment</span><br></p><br><p><span>• Strictly follow safety protocols (confined space, lock-out/tag-out) and maintain accurate shift logs for regulatory compliance</span><br></p><br><p><span>• Ensure plant housekeeping, manage chemical inventory, and coordinate with vendors for major breakdowns</span><br></p><br><br><span>Requirements</span><p><span>• Diploma/Bachelor's in Chemical, Environmental, or Mechanical Engineering; OR ITI/Diploma in relevant trade with experience</span><br></p><br><p><span>• 2–5 years of hands-on experience in STP operations with exposure to ASP, SBR, MBBR, or MBR technologies (1+ MLD capacity preferred)</span><br></p><br><p><span>• Wastewater Operator License is preferred; valid First-Aid/CPR certification is a plus</span><br></p><br><p><span>• Strong mechanical aptitude for pumps/valves, ability to interpret lab data, and basic SCADA/HMI literacy</span><br></p><br><p><span>• Physically fit for climbing, standing, and lifting up to 25kg; willing to work rotating shifts and emergency call-outs</span><br></p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking experienced <b>FM Operators</b> to support a large-scale Facilities Management project in Qatar.</p><p>Key Responsibilities</p><ul><li>Operate and monitor building electromechanical systems and equipment.</li><li>Monitor <b>BMS and associated building systems</b>, identifying alarms, faults and abnormal operating conditions.</li><li>Support the operation of <b>HVAC, mechanical, electrical and cooling systems</b>.</li><li>Record equipment readings and maintain accurate operational logs.</li><li>Coordinate with maintenance teams when faults or technical issues are identified.</li><li>Follow established <b>HSE procedures, operational standards and preventive maintenance requirements</b>.</li><li>Support the reliable and continuous operation of facilities and associated equipment.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Technical qualification in <b>Air Conditioning, Mechanical, Electromechanical or a related technical discipline</b>.</li><li>Minimum <b>5 years of relevant experience</b>, preferably including experience within large facilities.</li><li>Previous experience as a <b>Plant Operator, FM Operator, BMS Operator or similar technical operations position</b>.</li><li>Good understanding of <b>electrical, mechanical, HVAC/cooling and electromechanical systems</b>.</li><li>Experience with <b>BMS/building systems</b> is highly preferred.</li><li>Previous experience within <b>schools, educational facilities or similar large-scale projects</b> is an advantage.</li><li><b>Arabic and English communication skills</b> preferred.</li><li><b>Must currently be based in Qatar.</b></li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b><span>Qualification:</span></b><br></p><br><ul><li><span>Bachelor’s degree in marine engineering / Naval Architecture / Mechanical Engineering or related field</span><br></li></ul><p><b><span>Experience:</span></b><br></p><br><ul><li><span>Minimum 4 years of experience in shipyard estimation (repair or new building)</span><br></li><li><span>Experience in dry docking, offshore vessels is preferred</span><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Auto Mechanic – Engineering &amp; CWS</span><br><span>Garage</span><br><span>Responsibilities</span><br></span><ul><li><span>Inspect, diagnose, maintain, and repair light and heavy vehicles.</span><br></li><li><span>Perform preventive, corrective, and breakdown maintenance according to work schedules.</span><br></li><li><span>Repair engines, transmissions, clutches, differentials, steering systems, brakes, and suspension systems.</span><br></li><li><span>Diagnose and repair fuel, cooling, lubrication, exhaust, and air-intake systems.</span><br></li><li><span>Troubleshoot vehicle electrical faults involving batteries, alternators, starters, wiring, lights, sensors, and control systems.</span><br></li><li><span>Carry out engine tune-ups, oil changes, filter replacements, lubrication, and fluid-level checks.</span><br></li><li><span>Use diagnostic scanners, multimeters, pressure gauges, and workshop testing equipment.</span><br></li><li><span>Dismantle, inspect, repair, replace, and reassemble defective components.</span><br></li><li><span>Conduct road tests and functional checks after completing repairs.</span><br></li><li><span>Maintain accurate records of inspections, repairs, parts replaced, and completed work orders.</span><br></li><li><span>Report recurring defects, unsafe vehicle conditions, and major repair requirements.</span><br></li><li><span>Safely use vehicle lifts, jacks, stands, hoists, and other garage equipment.</span><br></li><li><span>Maintain tools, equipment, and proper housekeeping within the garage.</span><br></li><li><span>Follow LOTO, environmental, safety, quality, and waste-disposal procedures.</span><br></li></ul><br><span>Requirements<span>​</span><br><br><span>​</span><br><br><span>Requirements</span><br></span><ul><li><span>Technical Diploma, ITI, or recognized trade certificate in Automobile, Diesel, or Mechanical Engineering.</span><br></li><li><span>Minimum 3 years of relevant auto-mechanic experience in a garage, industrial plant, transport company, or heavy-vehicle workshop.</span><br></li><li><span>Experience maintaining both petrol and diesel vehicles is preferred.</span><br></li><li><span>Knowledge of engines, transmissions, brakes, steering, suspension, electrical, and fuel systems.</span><br></li><li><span>Ability to diagnose mechanical and electrical faults using appropriate testing equipment.</span><br></li><li><span>Experience with cars, buses, pickup trucks, heavy vehicles, and industrial transport vehicles is preferred.</span><br></li><li><span>Ability to read workshop manuals, wiring diagrams, fault codes, and technical specifications.</span><br></li><li><span>Skilled in using hand tools, power tools, diagnostic scanners, and garage equipment.</span><br></li><li><span>Basic knowledge of vehicle air-conditioning systems is an advantage.</span><br></li><li><span>Good troubleshooting, technical, and problem-solving abilities.</span><br></li><li><span>Knowledge of garage safety, vehicle lifting, LOTO, and environmental procedures.</span><br></li><li><span>Physically fit and capable of working in an industrial garage environment.</span><br></li><li><span>Ability to communicate in English and work independently or as part of a team.</span><br></li><li><span>A valid driving licence is preferred.</span><br></li></ul><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><span>​</span>Interested candidates can send cv to 31313903<br><br><br><span>Benefits</span><br> </div>

<p><strong>Company Description</strong> Mannai Energy is a regional energy services provider supporting industrial facilities and infrastructure projects with technical expertise and reliable field operations. The company offers installation, maintenance, and repair services for mechanical and electrical systems, including heating, ventilation, and air conditioning (HVAC) equipment. Mannai Energy focuses on safety, efficiency, and regulatory compliance across all service activities. Team members work in a collaborative environment with opportunities to develop specialized technical skills and advance within the organization.</p><p><strong>Role Description</strong> The Heating Air Conditioning Technician is a full-time, on-site role based in Ras Laffan. The technician installs, maintains, and repairs HVAC systems, including chillers, air handlers, split units, and package units. Daily responsibilities include diagnosing system issues, performing troubleshooting on mechanical and electrical components, and carrying out scheduled preventive maintenance to ensure optimal performance and energy efficiency. The role involves inspecting and testing equipment, replacing or repairing parts, managing refrigerants in compliance with regulations, and coordinating with supervisors and other trades on site. The technician also maintains accurate service records, follows safety procedures, and supports continuous improvement of maintenance practices.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Candidates should possess strong troubleshooting skills for HVAC systems and related mechanical components.</li><li>Candidates should possess plumbing skills relevant to HVAC installations, condensate drainage, and piping connections.</li><li>Candidates should possess preventive maintenance skills, including routine inspections, cleaning, adjustments, and scheduled servicing.</li><li>Candidates should possess EPA-related knowledge or equivalent refrigerant handling certification, with safe practices for refrigerant recovery and charging.</li><li>Candidates should possess basic to intermediate electricity skills, including reading wiring diagrams, working with control circuits, and using electrical testing tools.</li><li>Technical diploma or certificate in HVAC, Mechanical, or Electrical Technology (or equivalent practical experience) is preferred.</li><li>Experience in industrial or commercial HVAC environments, ideally within energy or petrochemical facilities, is beneficial.</li><li>Ability to read and interpret technical manuals, maintenance procedures, and safety guidelines.</li><li>Strong attention to detail, adherence to safety standards, and capability to work in a team-oriented, on-site environment.</li><li>Willingness to work shifts, overtime, or call-outs as operational needs require.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job QA/QC Manager <p>Job Title QA/QC Manager</p><br> <p>Section QA/QC Division Major Projects</p><br> <p>Department QA/QC Reports to Chief Major Projects Officer</p><br> <p>JOB PURPOSE</p><br> <p>This role is responsible for leading and managing the QA/QC Department within Major Projects, ensuring the</p><br> <p>effective development, coordination, implementation, execution, and control of quality activities in alignment</p><br> <p>with the Company's strategy, commitments, and goals. The position oversees multi-disciplinary teams,</p><br> <p>including Section Heads, Engineers, Coordinators, Supervisors, and Inspectors, to deliver QA/QC governance</p><br> <p>and Project support in accordance with Company requirements.</p><br> <p>The role is strongly focused on managing the QA/QC team, providing direction for technical problem-solving,</p><br> <p>decision-making, and portfolio analysis through innovative and analytical approaches. The role-holder is</p><br> <p>accountable for driving compliance with Project quality requirements while promoting and ensuring</p><br> <p>adherence to Company Occupational Health &amp; Safety, Environmental, Energy, and Quality systems and</p><br> <p>standards</p><br> <p>KEY ACCOUNTABILITIES</p><br> <p>Management Systems</p><br> <p>Awareness of Company Integrated Management Systems (Quality; Environment; Occupational Health &amp;</p><br> <p>Safety; Responsible Care; &amp; Energy Management Systems and IFA Product Stewardship)</p><br> <p>Comply with all the relevant policies and procedures of Company Integrated Management Systems.</p><br> <p>Ensure that Company and Project HSEQ requirements take the highest priority and actively implemented</p><br> <p>in Project Day to day activities.</p><br> <p>Company Strategy</p><br> <p>Awareness of Company Vision, Mission, Strategic Map &amp; Core Values.</p><br> <p>Support to Senior Management</p><br> <p>Support the Chief Major Projects Officer by overseeing and managing all QA/QC activities.</p><br> <p>Assist the Chief Major Projects Officer in reviewing Project Team lessons learned and in finalizing the</p><br> <p>Lessons Learned Report.</p><br> <p>Adherence</p><br> <p>Awareness of Company and Major Projects specific HSE requirements and compliance with all relevant</p><br> <p>policies and procedures of Company Integrated Management Systems, Major Projects and the relevant</p><br> <p>Authorities</p><br> <p>Awareness of Company and Major Projects specific Quality requirements and compliance with all relevant</p><br> <p>policies and procedures</p><br> <p>Ensure full implementation and adherence to the HSE Regulations and proper follow up of the HSE</p><br> <p>Procedures and Instructions in all areas of Work</p><br> <p>Managing Activities:</p><br> <p>KEY ACCOUNTABILITIES</p><br> <p>1. QA/QC Leadership &amp; Strategy</p><br> <p>Lead the overall Quality Assurance and Quality Control function across all phases of the project:</p><br> <p>engineering, procurement, construction, and commissioning.</p><br> <p>Ensure full implementation of EPCC Contract requirements, Project specific Quality Management</p><br> <p>System/Plan.</p><br> <p>Support the Chief Major Projects Officer in all QA/QC matters and report deviations, risks, and</p><br> <p>improvement opportunities.</p><br> <p>Promote a culture of quality, compliance, and continuous improvement across the project team and</p><br> <p>contractors.</p><br> <p>2. Quality Surveillance Across Project Phases</p><br> <p>Oversee and conduct quality surveillance during:</p><br> <p>o Engineering: Ensure design deliverables meet quality standards and contractual</p><br> <p>requirements.</p><br> <p>o Procurement: Verify quality controls in material requisitions, vendor selection, inspection</p><br> <p>planning, and fabrication.</p><br> <p>o Construction: Monitor site activities for compliance with ITPs, method statements, and</p><br> <p>specifications.</p><br> <p>o Commissioning: Ensure systems are tested and verified in accordance with approved quality</p><br> <p>protocols.</p><br> <p>Review and follow the EPCC Contractor's Quality Gates Process to ensure engineering development</p><br> <p>aligns with project quality assurance requirements.</p><br> <p>3. Quality Audit Planning &amp; Execution</p><br> <p>Develop and implement a Project Quality Audit Plan covering internal teams, EPCC Contractor, and</p><br> <p>Subcontractors.</p><br> <p>Conduct scheduled and unscheduled audits, including:</p><br> <p>o Internal Project Team audits</p><br> <p>o EPCC Contractor audits</p><br> <p>o Subcontractor and vendor audits</p><br> <p>Prepare audit documentation (notifications, agendas, checklists, reports).</p><br> <p>Maintain an Audit Report Register to track non-conformances, observations, and agreed actions.</p><br> <p>Follow up on audit findings and ensure timely closure of recommendations.</p><br> <p>4. Procedure Review &amp; Compliance</p><br> <p>Review and approve Project Procedures to ensure they incorporate adequate QA/QC requirements.</p><br> <p>Ensure procedures are aligned with the EPCC Contract, PIM, and Company standards.</p><br> <p>Monitor implementation of procedures across all project phases and stakeholders.</p><br> <p>5. Contract &amp; Risk Management</p><br> <p>Follow up with EPCC Contractor on interpretation and implementation of EPCC Contract documents</p><br> <p>related to quality.</p><br> <p>Identify, report, and track quality-related risks within the QA/QC domain.</p><br> <p>Focal point (Risk Manager) for managing the Project Risk Management process including but not</p><br> <p>limited to development and establishment of Project Risk Register and its monthly update.</p><br> <p>KEY ACCOUNTABILITIES</p><br> <p>6. Quality Control Oversight</p><br> <p>Oversee all QC activities at site and vendor/subcontractor locations during equipment fabrication and</p><br> <p>delivery.</p><br> <p>Manage and allocate QC inspectors to ensure timely execution of inspections and RFIs.</p><br> <p>Ensure compliance with approved ITPs and monitor adherence throughout the project lifecycle.</p><br> <p>Review and approve inspection reports, expediting reports, and inspection notifications.</p><br> <p>7. Procurement Quality Control</p><br> <p>Liaise with Procurement to embed quality requirements in material requisitions, technical bid</p><br> <p>evaluations, and purchase orders.</p><br> <p>Review EPCC Contractor tender documents to confirm inclusion of technical specifications and quality</p><br> <p>requirements.</p><br> <p>Coordinate inspection visits to vendor facilities and manage inspection schedules and logistics.</p><br> <p>Review expediting reports and manage fabrication defects, ensuring timely resolution and</p><br> <p>documentation.</p><br> <p>8. Non-Conformance &amp; Deviation Management</p><br> <p>Review NCRs submitted by EPCC Contractors and Subcontractors for technical feasibility and</p><br> <p>contractual impact.</p><br> <p>Coordinate with engineering teams to evaluate NCRs and recommend corrective actions.</p><br> <p>Manage Negative Variation Orders for non-conformance-related costs.</p><br> <p>Review and approve deviation requests, concession requests, and material selection changes.</p><br> <p>Track closure of NCRs and verify implementation of corrective actions.</p><br> <p>9. Construction Quality Monitoring</p><br> <p>Continuously monitor construction activities to ensure correct interpretation and execution of</p><br> <p>technical documents.</p><br> <p>Verify construction works are performed in accordance with approved ITPs and meet quality and</p><br> <p>safety standards.</p><br> <p>Ensure timely identification and resolution of quality issues during construction.</p><br> <p>10. Mechanical Completion Oversight</p><br> <p>Lead the mechanical completion process, ensuring systems and components are installed, tested,</p><br> <p>and documented per contract requirements.</p><br> <p>Oversee punch list generation, classification (A/B/C), and closure in coordination with EPCC</p><br> <p>Contractor and Company teams.</p><br> <p>Ensure readiness for pre-commissioning and commissioning by verifying completion of quality related</p><br> <p>deliverables.</p><br> <p>11. Site &amp; Equipment Preservation</p><br> <p>Ensure proper preservation of equipment, spare parts, and tools at site per EPCC Contract and</p><br> <p>manufacturer recommendations.</p><br> <p>Monitor environmental conditions, storage practices, and handling procedures.</p><br> <p>Coordinate inspection of equipment upon arrival and during storage, ensuring compliance with</p><br> <p>preservation protocols.</p><br> <p>12. Inspection Test Plan (ITP) &amp; RFI Management</p><br> <p>Ensure all site activities are executed in accordance with approved ITPs.</p><br> <p>Monitor and verify completion of inspection hold points, witness points, and review points.</p><br> <p>Oversee the RFI process, ensuring timely submission, review, and closure.</p><br> <p>Maintain RFI logs and ensure traceability of inspection outcomes.</p><br> <p>13. Subcontractor Coordination &amp; Technical Review</p><br> <p>Review quality-related reports from EPCC Contractor and Subcontractors, including inspection</p><br> <p>summaries and test results.</p><br> <p>Coordinate with engineering teams to evaluate technical implications and recommend corrective</p><br> <p>actions.</p><br> <p>Ensure timely implementation and verification of rectification measures.</p><br> <p>14. Reporting &amp; Continuous Improvement</p><br> <p>Provide inputs to monthly progress reports, Steering Committee updates, and Board presentations.</p><br> <p>Support the Chief Major Projects Officer in reviewing and finalizing Lessons Learned reports.</p><br> <p>Promote continuous improvement initiatives and ensure lessons learned are captured and applied</p><br> <p>across the project.</p><br> <p>Project Progress and Planning:</p><br> <p>Follow up for the timely closure of Project quality audit findings.</p><br> <p>Follow up for progress of all QA/QC activities.</p><br> <p>Project Information Manual (PIM):</p><br> <p>Shall ensure Project Close Out with EPCC Contractor in line with PIM and Project Procedures</p><br> <p>Initiate 'Project Changes' affecting his function/ discipline in accordance with the Project Information</p><br> <p>Manual</p><br> <p>Shall document and submit Lessons Learned in accordance with relevant PIM procedure</p><br> <p>Initiate discipline specific 'Principal Decisions' in accordance with relevant PIM procedure.</p><br> <p>EDUCATIONAL QUALIFICATION &amp; EXPERIENCE</p><br> <p>Qualification Required Technical Non-Technical</p><br> <p>Higher Secondary School (12 years)</p><br> <p>Diploma (12+2 years)</p><br> <p>Advanced Diploma/Equivalent (12+3 years)</p><br> <p>Bachelor's Degree (12+4 years)</p><br> <p>Professional Certification (Please specify)</p><br> <p>Other Qualification (Please specify)</p><br> <p>Remarks</p><br> <p>QA/QC Manager shall possess at least 10 years of relevant work experience in similar major expansion</p><br> <p>projects out of which he/she shall be in leadership role in at least 5 years.</p><br> <br> <br> </div>

<p><strong><em>Important: Please apply only if you are currently Qatar MMUP/UPDA GRADE A certified Engineer with the residency.</em></strong></p><p><br></p><p><strong><em>Applications that do not meet this mandatory requirement will not be considered.</em></strong></p><p><br></p><p><strong><em>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA GRADE A registration.</em></strong></p><p><br></p><p><strong>Who We Are:</strong></p><p><br></p><p>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.</p><p><br></p><p><strong>Global Projects and the Energy of the Future</strong>:</p><p><br></p><p>At TR, we develop projects in Oil &amp; Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.</p><p><br></p><p><strong>Specific functions:</strong></p><p><br></p><ul><li>Directs supervises and coordinates pipeline activities within the Project.</li><li>Ensures the application of the working procedures and instructions in the Project and the specifications thereof.</li><li>Understand and share the scope of the Project as well as the Contract.</li><li>Supervises the edition and implementation of the Design specification.</li><li>Assistance to Project meetings, both with Management and with the Client.</li><li>Creation of the PPA according to the budget of approved hours.</li><li>Workload management. Staff needs.</li><li>Preparation and monitoring of project planning.</li><li>Progress Report Edit.</li><li>Editing Subcontract Reports.</li><li>PPA Edition.</li><li>Editing the list of lines to be modelled.</li><li>Editing the forecast of isometric to be edited.</li><li>Hours budget control to maximize productivity.</li><li>Project Progress Control.</li><li>NVAT Management.</li><li>Signing of work parts.</li><li>Definition and monitoring of the individual production of the personnel assigned to the Project.</li><li>Approval of the different plans generated by the department during the Project.</li></ul><p><br></p><p><strong>Requirements:</strong></p><p><br></p><p>Valid <strong>MMUP/UPDA GRADE A Engineer certification/registration.</strong></p><p><br></p><ul><li>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;</li><li>Bachelor’s or Master's Degree in Engineering in the relevant discipline;</li><li>Strong relevant Engineering and Project experience;</li><li>Previous experience working on major projects in Qatar is highly preferred;</li><li>Good knowledge of Qatar Engineering standards, regulations, and Project requirements;</li><li>Strong communication, coordination, and technical skills.</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The General Foreman is responsible to oversee daily site operations, coordinate with subcontractors and workers, and ensure projects are completed safely, efficiently, and according to specifications. They play a pivotal role in maintaining productivity, enforcing safety protocols, and fostering a collaborative work environment to achieve project goals. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Maintain acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br> <p>Monitor and control the latest valid drawings issued for use.</p><br> <p>Coordinate at various levels to carry out activities as built for major elements of work.</p><br> <p>Perform necessary corrective actions on work requiring rework or remedial actions as instructed and directed by the site engineer.</p><br> <p>Ensure that works are achieved based on the approved Shop Drawings, method statement, and Behavior-Based Safety (BBS) and 100% completed on or before the scheduled date of accomplishment.</p><br> <p>Complete site supervision of work, labor, materials, equipment-movement and proper distribution of such resource to ensure project costs and budgets are adhered to.</p><br> <p>Ensure daily accomplish the site supervision of operational related activities and ensure that the cost of the activities will not exceed.</p><br> <p>Maintains acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br> <p>Ensure accomplishing assigned works on the time frame allotted maintaining the quality according to Company standards and reduce the reworks percentage to 0%.</p><br> <p>Ensure compliance with the safety – Procedures and report if found any risk to the site Engineer to help project team to maintain zero Loss Time Incidents (LTIs).</p><br> <p>Ensure that 100% of workers under the supervision are in compliance with the Company’s safety procedures during work hours on a daily basis.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge in Project construction scope and objectives.</p><br> <p>Knowledge in project safety programs and objectives.</p><br> <p>Knowledge in Company and project safety programs and objectives.</p><br> <p>Knowledge in Occupational health and safety and environmental policies and procedures. </p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Project Management L2<br>Cost Management L2<br>QA/QC L2<br>Design &amp; Construction L2<br>HSE L2<br><br><br><u><b>Education</b></u> <br>High School Diploma in any Related Technical Certificates<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>• </span><b><span>5+ Years of Experience in Mechanical Maintenance</span></b><br><br><span>• </span><b><span>Experience in RM-2 / Rolling Mill operations preferred</span></b><br><br><span>• </span><b><span>Oil &amp; Gas / Steel / Industrial experience preferred</span></b><br><br><span>• </span><b><span>Strong knowledge of mechanical maintenance, troubleshooting &amp; repair</span></b><br><br></span><br> </div>

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>