Mechanical Design Engineer Jobs in Qatar

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>Exercise / Sports Physiologist: to manage our diagnostic suite, operate world-class testing hardware, and guide patients through data-driven health transformations.</p><p>&nbsp;</p><p><strong>Responsibilities:</strong></p><ul><li><strong>Cardiopulmonary &amp; Metabolic Diagnostics:</strong> Administer VO2 Max and RMR testing using the KORR Cardio Coach PRO metabolic cart paired with treadmills/ergometers. Identify Ventilatory Thresholds (VT1/VT2) and targeted FatMax zones.</li><li><strong>Medical Body Composition:</strong> Interpret GE Lunar DXA scans focusing on lean mass symmetry, visceral adipose tissue (VAT) index, and Bone Mineral Density (BMD).</li><li><strong>Biomechanical Assessment:</strong> Conduct 3D skeletal tracking and Range of Motion (ROM) analysis using Kinotek LiDAR technology, alongside peak isometric strength testing via Activforce 2 digital dynamometers.</li><li><strong>Consulting &amp; Suite Management:</strong> Design actionable, evidence-based exercise prescriptions while ensuring clinical calibration and maintenance of diagnostic hardware.</li></ul><p>&nbsp;</p><p><strong>Requirements &amp; Qualifications:</strong></p><ul><li><strong>Education:</strong> Bachelor’s or Master’s Degree in Clinical Exercise Physiology, Sports Physiology, or Human Movement Science.</li><li><strong>Licensing/Certifications (Must hold at least one):</strong> ACSM-RCEP / ACSM-CEP, ESSA-AEP, or equivalent clinical registration.</li><li>&nbsp;</li><li><strong>Technical Skills:</strong>&nbsp;</li><li>Deep expertise in Indirect Calorimetry, Graded Exercise Testing (GXT), and Substrate Utilization (RER).</li><li>Strong clinical communication skills with a drive to expand diagnostic suite services.</li><li>Note: Standard personal training certificates (e.g., NASM, ACE, ISSA) alone are strictly insufficient.</li></ul>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:<br>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)<br>Supervise, guide, and monitor work done by external vendors.<br>Prepare and submit technical log reports, checklist or forms as part of daily routine work.<br>Obtain spare parts, materials, and consumables either from internal store or external location.<br>Utilize, maintain and safe keep specific tools assigned by company.<br>Maintain proper tools, PPE s, Spares and provide annual requirements.<br>Respond to emergency situations during or after hours as part of business continuity.<br>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.<br>Where applicable, aid and support to other team members within and across the discipline, whenever required.<br>Participate in QC provided training as deemed fit by management.<br>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:<br>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)<br>Supervise, guide, and monitor work done by external vendors.<br>Prepare and submit technical log reports, checklist or forms as part of daily routine work.<br>Obtain spare parts, materials, and consumables either from internal store or external location.<br>Utilize, maintain and safe keep specific tools assigned by company.<br>Maintain proper tools, PPE s, Spares and provide annual requirements.<br>Respond to emergency situations during or after hours as part of business continuity.<br>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.<br>Where applicable, aid and support to other team members within and across the discipline, whenever required.<br>Participate in QC provided training as deemed fit by management.<br>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Job Description: Auto Electrician (Heavy Vehicle) Location: Doha, Qatar Company: AL ASAS Factories for Cement Project Job Type: Full-Time Hiring Status: Immediate Joining Required Position Overview AL ASAS Factories for Cement Project is seeking an experienced Auto Electrician (Heavy Vehicle) with a minimum of 5 years of hands-on experience in diagnosing, repairing, and maintaining electrical systems of heavy-duty vehicles. The ideal candidate should also possess basic mechanical knowledge and be capable of assisting mechanics when electrical tasks are not required.</p><p><b>Key Responsibilities</b></p><p>Auto Electrical Duties (Primary Role)</p><ul><li>Diagnose, repair, and maintain electrical systems in heavy vehicles including trucks, trailers, and construction equipment.</li><li>Troubleshoot faults related to wiring, lighting, starters, alternators, relays, sensors, ECUs, battery systems, etc.</li><li>Repair A/C wiring, dashboard circuits, auxiliary systems, and related electrical components.</li><li>Perform preventive electrical maintenance to minimize equipment downtime.</li><li>Install and service heavy-vehicle electronic and electrical systems.</li><li>Interpret wiring diagrams, schematics, and technical manuals accurately.</li><li>Ensure all electrical repairs comply with manufacturer recommendations and safety standards.</li><li>Maintain accurate records of repairs, inspections, and replaced parts.</li></ul><p>Mechanical Support Duties (Secondary Role)</p><ul><li>Assist mechanics with basic repairs, part replacements, lubrication, and routine servicing when required.</li><li>Support workshop operations and attend breakdown maintenance tasks.</li><li>Follow workshop safety protocols, company rules, and standard operating procedures.</li></ul><p>Salary &amp; Benefits</p><p>During Probation (4 Months Negotiable)</p><p>Basic Salary: 1,000 QAR Food Allowance: 300 QAR Other Allowance: 200 QAR Total: 1,500 QAR</p><p>After Successful Probation</p><p>Basic Salary: 1,200 QAR Food Allowance: 300 QAR Other Allowance: 500 QAR Total: 2,000 QAR</p><p>Note: Salary may increase based on performance and company expectations during the contract period.</p><p>Employment Benefits &amp; Conditions</p><p>Contract Duration: 5 years (renewable based on performance and mutual agreement).</p><p>Accommodation: Provided from day one (located inside the factory premises).</p><p>Transportation: Not required due to on-site accommodation.</p><p>Health Insurance: Provided by the company.</p><p>Flight Ticket: One-way ticket every 2 years.</p><p>Working Hours: 8 hours/day, 6 days/week.</p><p>Overtime: Paid as per company policy and Qatari labor law for work exceeding 8 hours/day.</p><p>Annual Leave: 21 days paid leave per year.</p><p>Probation Terms: If the candidate fails probation, return flight and visa costs must be borne by the candidate.</p><p>Visa Processing: Company will cover visa fees and flight ticket from home country to Qatar.</p><p>Medical Test: Candidate must bear the cost of pre-departure medical examination in their home country.</p><p>Minimum Requirements</p><ul><li>Minimum 5 years of experience as an Auto Electrician for heavy vehicles.</li><li>Excellent technical knowledge of heavy-vehicle electrical systems (wiring, alternators, starters, sensors, relays, ECUs, etc.).</li><li>Strong diagnostic and problem-solving skills.</li><li>Basic mechanical skills with willingness to support mechanical tasks when required.</li><li>Ability to read and understand wiring diagrams and technical manuals.</li><li>High level of responsibility, teamwork, and safety awareness.</li><li>Relevant technical certifications preferred.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years of experience as an Auto Electrician for heavy vehicles.</li><li>Excellent technical knowledge of heavy-vehicle electrical systems (wiring, alternators, starters, sensors, relays, ECUs, etc.).</li><li>Strong diagnostic and problem-solving skills.</li><li>Basic mechanical skills with willingness to support mechanical tasks when required.</li><li>Ability to read and understand wiring diagrams and technical manuals.</li><li>High level of responsibility, teamwork, and safety awareness.</li><li>Relevant technical certifications preferred.</li></ul>

<p><b>QA/QC Leadership &amp; Strategy</b></p><p>Lead the overall Quality Assurance and Quality Control function across all phases of the project: engineering, procurement, construction, and commissioning.</p><p>Ensure full implementation of EPCC Contract requirements, Project specific Quality Management System/Plan.</p><p>Support the Chief Major Projects Officer in all QA/QC matters and report deviations, risks, and improvement opportunities.</p><p>Promote a culture of quality, compliance, and continuous improvement across the project team and contractors.</p><p>Quality Surveillance Across Project Phases</p><p>Oversee and conduct quality surveillance during:</p><p>Engineering: Ensure design deliverables meet quality standards and contractual requirements.</p><p>Procurement: Verify quality controls in material requisitions, vendor selection, inspection planning, and fabrication.</p><p>Construction: Monitor site activities for compliance with ITPs, method statements, and specifications.</p><p>Commissioning: Ensure systems are tested and verified in accordance with approved quality protocols.</p><p>Review and follow the EPCC Contractor's Quality Gates Process to ensure engineering development aligns with project quality assurance requirements.</p><p>Quality Audit Planning &amp; Execution</p><p>Develop and implement a Project Quality Audit Plan covering internal teams, EPCC Contractor, and Subcontractors.</p><p>Conduct scheduled and unscheduled audits, including:</p><ul><li>Internal Project Team audits</li><li>EPCC Contractor audits</li><li>Subcontractor and vendor audits</li></ul><p>Prepare audit documentation (notifications, agendas, checklists, reports).</p><p>Maintain an Audit Report Register to track non-conformances, observations, and agreed actions.</p><p>Follow up on audit findings and ensure timely closure of recommendations.</p><p>Procedure Review &amp; Compliance</p><p>Review and approve Project Procedures to ensure they incorporate adequate QA/QC requirements.</p><p>Ensure procedures are aligned with the EPCC Contract, PIM, and COMPANY standards.</p><p>Monitor implementation of procedures across all project phases and stakeholders.</p><p>Contract &amp; Risk Management</p><p>Follow up with EPCC Contractor on interpretation and implementation of EPCC Contract documents related to quality.</p><p>Identify, report, and track quality-related risks within the QA/QC domain.</p><p>Focal point (Risk Manager) for managing the Project Risk Management process including but not limited to development and establishment of Project Risk Register and its monthly update.</p><p>Quality Control Oversight</p><p>Oversee all QC activities at site and vendor/subcontractor locations during equipment fabrication and delivery.</p><p>Manage and allocate QC inspectors to ensure timely execution of inspections and RFIs.</p><p>Ensure compliance with approved ITPs and monitor adherence throughout the project lifecycle.</p><p>Review and approve inspection reports, expediting reports, and inspection notifications.</p><p>Procurement Quality Control</p><p>Liaise with Procurement to embed quality requirements in material requisitions, technical bid evaluations, and purchase orders.</p><p>Review EPCC Contractor tender documents to confirm inclusion of technical specifications and quality requirements.</p><p>Coordinate inspection visits to vendor facilities and manage inspection schedules and logistics.</p><p>Review expediting reports and manage fabrication defects, ensuring timely resolution and documentation.</p><p>Non-Conformance &amp; Deviation Management</p><p>Review NCRs submitted by EPCC Contractors and Subcontractors for technical feasibility and contractual impact.</p><p>Coordinate with engineering teams to evaluate NCRs and recommend corrective actions.</p><p>Manage Negative Variation Orders for non-conformance-related costs.</p><p>Review and approve deviation requests, concession requests, and material selection changes.</p><p>Track closure of NCRs and verify implementation of corrective actions.</p><p>Construction Quality Monitoring</p><p>Continuously monitor construction activities to ensure correct interpretation and execution of technical documents.</p><p>Verify construction works are performed in accordance with approved ITPs and meet quality and safety standards.</p><p>Ensure timely identification and resolution of quality issues during construction.</p><p>Mechanical Completion Oversight</p><p>Lead the mechanical completion process, ensuring systems and components are installed, tested, and documented per contract requirements.</p><p>Oversee punch list generation, classification (A/B/C), and closure in coordination with EPCC Contractor and COMPANY teams.</p><p>Ensure readiness for pre-commissioning and commissioning by verifying completion of quality related deliverables.</p><p>Site &amp; Equipment Preservation</p><p>Ensure proper preservation of equipment, spare parts, and tools at site per EPCC Contract and manufacturer recommendations.</p><p>Monitor environmental conditions, storage practices, and handling procedures.</p><p>Coordinate inspection of equipment upon arrival and during storage, ensuring compliance with preservation protocols.</p><p>Inspection Test Plan (ITP) &amp; RFI Management</p><p>Ensure all site activities are executed in accordance with approved ITPs.</p><p>Monitor and verify completion of inspection hold points, witness points, and review points.</p><p>Oversee the RFI process, ensuring timely submission, review, and closure.</p><p>Maintain RFI logs and ensure traceability of inspection outcomes.</p><p>Subcontractor Coordination &amp; Technical Review</p><p>Review quality-related reports from EPCC Contractor and Subcontractors, including inspection summaries and test results.</p><p>Coordinate with engineering teams to evaluate technical implications and recommend corrective actions.</p><p>Ensure timely implementation and verification of rectification measures.</p><p>Reporting &amp; Continuous Improvement</p><p>Provide inputs to monthly progress reports, Steering Committee updates, and Board presentations.</p><p>Support the Chief Major Projects Officer in reviewing and finalizing Lessons Learned reports.</p><p>Promote continuous improvement initiatives and ensure lessons learned are captured and applied across the project.</p><p><strong>Desired Candidate Profile</strong></p><p>QA/QC Manager shall possess at least 10 years of relevant work experience in similar major expansion projects out of which he/she shall be in leadership role in at least 5 years.</p><p>Bachelor's Degree (12+4 years)</p><p>Professional Certification</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Site Engineer is responsible to oversee site activities, manage teams, and ensure projects are executed according to specifications and timelines. They play a crucial role in maintaining quality standards, enforcing safety regulations, and resolving technical issues to achieve project objectives efficiently.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Oversee site activities, including progress, quality control, and adherence to safety protocols, ensuring compliance with project specifications and standards.</p><br> <p>Manage teams, including contractors, subcontractors, and laborers, providing leadership, guidance, and support to achieve project objectives.</p><br> <p>Provide technical support and expertise to resolve issues, interpret drawings and specifications, and ensure activities are executed accurately.</p><br> <p>Implement quality assurance procedures, conducting inspections and audits to ensure workmanship and materials meet project requirements and industry standards.</p><br> <p>Monitor progress against project schedules, identifying potential delays or bottlenecks and implementing corrective actions to keep projects on track.</p><br> <p>Assist in monitoring project budgets and costs, identifying cost-saving opportunities and minimizing expenses to optimize project profitability.</p><br> <p>Coordinate with procurement teams to ensure timely procurement and delivery of materials and equipment, minimizing delays and disruptions to project timelines.</p><br> <p>Serve as a primary point of contact for clients and stakeholders, providing regular project updates, addressing concerns, and managing expectations to ensure client satisfaction.</p><br> <p>Enforce safety regulations and best practices on the site, conducting safety inspections, promoting a culture of safety, and implementing corrective measures to prevent accidents and injuries.</p><br> <p>Maintain accurate records of activities, including daily reports, progress photographs, and change orders, and prepare regular project reports for management and stakeholders</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Strong operational skills and an attention to detail, and experience of the design build process Strong customer focus skills and attitude. Strong and effective communication and interpersonal skills Leadership Project Management Analytical thinker with demonstrated problem-solving skills Professional client management and interaction </p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality_321977507<br>Leadership_321977503<br>Project Estimating L2<br>Project Planning L2_321977563<br>Construction Budgeting L2<br>Contingency Workforce Management L2<br>Commercial &amp; Residential Construction L2<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or Engineering<br><br><br><br> </div>

<p><strong>Company Description</strong> Events and Production, a division of APEX BUSINESS SOLUTIONS WLL, is a team of experienced, creative, and dynamic professionals specializing in comprehensive event management. Operating under the “Apex Events” brand and headquartered in Qatar, the company delivers tailored solutions across all segments of events and production. Apex Events focuses on simplifying and enhancing the quality of event services, ensuring each event has a distinct meaning, identity, and vision. The organization positions itself as a wholesome solution for clients seeking reliable, end-to-end event management support. Team members collaborate closely with clients to create memorable and impactful experiences.</p><p><br></p><p><strong>Role Description</strong> The Event Lighting Engineer is a full-time, on-site role based in Zone 39, responsible for designing, programming, and operating lighting systems for a wide range of events. This role involves developing lighting plans that align with event concepts, installing and configuring fixtures and control equipment, and conducting pre-event testing and troubleshooting to ensure optimal performance. The Event Lighting Engineer coordinates with event producers, stage managers, and audiovisual technicians to deliver cohesive technical setups, and provides real-time adjustments during rehearsals and live events. Daily responsibilities also include maintaining lighting equipment, ensuring adherence to safety standards, and supporting post-event breakdown and inventory management.</p><p><br></p><p><strong>Qualifications</strong></p><ul><li>Strong skills in Lighting Design and Lighting for live events, including creating mood, atmosphere, and visual impact.</li><li>Experience with Lighting Control systems, such as consoles, software, and control networks for programming and operating shows.</li><li>Proficiency with LED Lighting Systems, including configuration, addressing, and integration into broader lighting rigs.</li><li>Knowledge of Street Lighting or outdoor lighting setups, including power distribution and safety considerations for external venues.</li><li>Previous experience in event production, stagecraft, or technical theater, preferably in large-scale or corporate events.</li><li>Ability to read technical drawings, stage plots, and lighting plans, and translate them into practical installations.</li><li>Strong problem-solving skills, attention to detail, and capacity to work under time constraints and changing event demands.</li><li>Comfort with manual handling, working at heights when required, and adherence to all relevant safety protocols.</li><li>Effective communication and collaboration skills to work with cross-functional event teams and clients.</li><li>Relevant technical certification or diploma in lighting, electrical, or event technology is preferred; equivalent practical experience is also valued.</li></ul><p><br></p><p>Drop your CV - admin@apexqatar.com</p>

<strong>Job Description<br><br></strong>Wood is recruiting for a Senior Pipelines Engineer to join our team in Qatar. In this role you are collaborating with a team of designers and engineers, where you will have the opportunity to be hands-on in supporting the group’s objectives across major FEED Project.<br><br><strong>The Role<br><br></strong>In this role, you will be responsible to supervise pipeline engineers and designers to translate the limited information from the Concept Selection Report and/or Basis for Design to Basis for Design and/or Front End Design &amp; project specifications as well as Detailed Design.<br><br><strong>Designing the future. Transforming the world.<br><br></strong>Our Consulting teams combine consultancy solutions with technical expertise to support our client’s capital investment decisions across the global energy and materials markets.<br><br><strong>Responsibilities<br><br></strong><ul><li>Direct and supervise a team of relevant discipline engineers and designers</li><li>Responsible for providing expertise and ensures the application of correct standards in all preFEED/FEED / EPC deliverables in the design and development of projects associated with Oil and Gas processing, production and export, as well as carbon capture processing, transportation and storage. </li><li>Supervise the work of relevant discipline Engineers and Superintendents and ensure that quality and standards are maintained, and cost-effective solutions are adopted</li><li>Fully understands the COMPANY HSE policy, procedures, regulations and objectives as they relate to his area of responsibility</li><li>Ensures that work under his/her control is performed in a safe and environmentally sound manner</li><li>Review any design work carried out by third parties (vendors) and participate, HAZOP, HAZID, IPF, reliability studies, and Safety and Facilities Technical Audits</li><li>Establish the actual (as opposed to design) capacities / capabilities of existing field facilities and pipelines to identify potential bottlenecks and scope for optimization</li><li>Identify potential applications for new technology</li><li>Develop actively the local staff to fulfill engineers and role</li><li>Know the environmental aspects (ISO14001) of oil and gas projects design</li><li>Know the safety aspects of design in relation to the project cycle (e.g. HAZID, HAZOP, HAZAN, IPF classification methodology and implementation, QRA, reliability studies, Fire and Gas mapping and risk analysis techniques)</li><li>Conduct life cycle cost analysis</li><li>Prepare RFQ (request for quotation) technical packages for pipelines related scopes</li><li>Prepare engineering, construction and material estimation, schedule, resource planning and update resource capacity planning half-yearly</li><li>Provide first class engineering in one or more of the following fields; risers, subsea pipelines, landfalls, subsea manifolds, piping design and onshore / subsea pipeline.</li><li>Be familiar with working with construction engineers and installation schemes.<br><br></li></ul><strong>Qualifications<br><br></strong><strong>What makes you remarkable? <br><br></strong>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br><ul><li>Bachelor’s degree in relevant engineering from an accredited university </li><li>Minimum of 10 years of relevant experience in the offshore / onshore Oil and Gas / Petrochemical and Marine industry.</li><li>Must have at least five years of experience in similar position for international major Oil and Gas / Petrochemical / Marine projects including minimum three years in ENGINEER’s / CONTRACTOR's organization.</li><li>Experienced in using ASME, API, ISO, DNV and Shell DEP codes and standards in pipelines design and construction. </li><li>Experienced in the use of pipeline software (AutoCAD, Microstation, MathCad, CAESAR II, Abacus, ESRI/GIS) is preferred</li><li>Proficiency in Microsoft Excel, Word, Outlook, and PowerPoint is required<br><br></li></ul><strong>About Us<br><br></strong>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br><strong>Diversity Statement <br><br></strong>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</li><li>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>3. Air Compressor</li><li>4. AHU fans and blower</li><li>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>6. Mechanical forklift</li><li>7. Mechanical manlift</li><li>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>The Operations Manager will lead the delivery of <strong>electromechanical maintenance and Facility Management services</strong> across a large-scale, multi-site project in Qatar. The position will be responsible for operational performance, technical service delivery, team leadership, QHSE compliance, and achievement of contractual requirements.</p><br><br>Key Responsibilities<ul><li>Lead day-to-day electromechanical maintenance and FM operations across multiple sites.</li><li>Manage engineering, supervisory, technical, and support teams.</li><li>Oversee Mechanical, Electrical, Plumbing (MEP), Civil, ELV, BMS, HVAC, and associated building systems.</li><li>Ensure effective delivery of planned preventive, corrective, and reactive maintenance.</li><li>Monitor operational performance, service levels, and contractual requirements.</li><li>Manage resources, operational budgets, and service performance.</li><li>Develop strong relationships with clients, stakeholders, and supply chain partners.</li><li>Ensure compliance with QHSE requirements and applicable Qatar standards.</li><li>Drive continuous improvement and effective use of technology.</li></ul>Requirements<ul><li>Bachelor's degree in <strong>Mechanical or Electrical Engineering</strong>, or equivalent.</li><li>Minimum <strong>15 years' total experience</strong>, including at least <strong>7 years in Facility Management</strong>.</li><li>Strong GCC experience within large-scale electromechanical/FM projects.</li><li>3 years' experience within schools and kindergartens is preferred.</li><li>Strong knowledge of MEP and Civil systems.</li><li>Proven leadership and multi-team management experience.</li><li>Strong financial and customer relationship management capabilities.</li><li><strong>Fluent in Arabic and English, spoken and written.</strong></li><li>QCDD certification preferred.</li><li>Grade A classification by Kahramaa / competent authority preferred.</li></ul> <br><br> </div>